spi: imx: fix runtime pm support for !CONFIG_PM

Commit Message

Sascha Hauer Oct. 21, 2020, 10:45 a.m. UTC

525c9e5a32bd introduced pm_runtime support for the i.MX SPI driver. With
this pm_runtime is used to bring up the clocks initially. When CONFIG_PM
is disabled the clocks are no longer enabled and the driver doesn't work
anymore. Fix this by enabling the clocks in the probe function and
telling pm_runtime that the device is active using
pm_runtime_set_active().

Fixes: 525c9e5a32bd spi: imx: enable runtime pm support
Tested-by: Christian Eggers <[e-mail]> [tested for !CONFIG_PM only]
Cc: [e-mail]  # 5.9.x only
Signed-off-by: Sascha Hauer <[e-mail]>
---
 drivers/spi/spi-imx.c | 23 +++++++++++++++--------
 1 file changed, 15 insertions(+), 8 deletions(-)

Comments

Mark Brown Oct. 24, 2020, 12:29 a.m. UTC | #1

On Wed, 21 Oct 2020 12:45:13 +0200, Sascha Hauer wrote:
> 525c9e5a32bd introduced pm_runtime support for the i.MX SPI driver. With
> this pm_runtime is used to bring up the clocks initially. When CONFIG_PM
> is disabled the clocks are no longer enabled and the driver doesn't work
> anymore. Fix this by enabling the clocks in the probe function and
> telling pm_runtime that the device is active using
> pm_runtime_set_active().

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next

Thanks!

[1/1] spi: imx: fix runtime pm support for !CONFIG_PM
      commit: 43b6bf406cd0319e522638f97c9086b7beebaeaa

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

Patch

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index 38a5f1304cec..c796e937dc6a 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -1674,15 +1674,18 @@  static int spi_imx_probe(struct platform_device *pdev)
 		goto out_master_put;
 	}
 
-	pm_runtime_enable(spi_imx->dev);
+	ret = clk_prepare_enable(spi_imx->clk_per);
+	if (ret)
+		goto out_master_put;
+
+	ret = clk_prepare_enable(spi_imx->clk_ipg);
+	if (ret)
+		goto out_put_per;
+
 	pm_runtime_set_autosuspend_delay(spi_imx->dev, MXC_RPM_TIMEOUT);
 	pm_runtime_use_autosuspend(spi_imx->dev);
-
-	ret = pm_runtime_get_sync(spi_imx->dev);
-	if (ret < 0) {
-		dev_err(spi_imx->dev, "failed to enable clock\n");
-		goto out_runtime_pm_put;
-	}
+	pm_runtime_set_active(spi_imx->dev);
+	pm_runtime_enable(spi_imx->dev);
 
 	spi_imx->spi_clk = clk_get_rate(spi_imx->clk_per);
 	/*
@@ -1719,8 +1722,12 @@  static int spi_imx_probe(struct platform_device *pdev)
 
 out_runtime_pm_put:
 	pm_runtime_dont_use_autosuspend(spi_imx->dev);
-	pm_runtime_put_sync(spi_imx->dev);
+	pm_runtime_set_suspended(&pdev->dev);
 	pm_runtime_disable(spi_imx->dev);
+
+	clk_disable_unprepare(spi_imx->clk_ipg);
+out_put_per:
+	clk_disable_unprepare(spi_imx->clk_per);
 out_master_put:
 	spi_master_put(master);