From patchwork Wed Nov 11 14:15:29 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Alexandru Ardelean X-Patchwork-Id: 11897879 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 4D53F921 for ; Wed, 11 Nov 2020 14:10:42 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 3451C20756 for ; Wed, 11 Nov 2020 14:10:42 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726774AbgKKOKl (ORCPT ); Wed, 11 Nov 2020 09:10:41 -0500 Received: from mx0a-00128a01.pphosted.com ([148.163.135.77]:34176 "EHLO mx0a-00128a01.pphosted.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726149AbgKKOKk (ORCPT ); Wed, 11 Nov 2020 09:10:40 -0500 Received: from pps.filterd (m0167088.ppops.net [127.0.0.1]) by mx0a-00128a01.pphosted.com (8.16.0.42/8.16.0.42) with SMTP id 0ABDtxR2020013; Wed, 11 Nov 2020 09:10:37 -0500 Received: from nwd2mta4.analog.com ([137.71.173.58]) by mx0a-00128a01.pphosted.com with ESMTP id 34npaawjxn-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Wed, 11 Nov 2020 09:10:37 -0500 Received: from SCSQMBX10.ad.analog.com (SCSQMBX10.ad.analog.com [10.77.17.5]) by nwd2mta4.analog.com (8.14.7/8.14.7) with ESMTP id 0ABEAZgL046900 (version=TLSv1/SSLv3 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128 verify=FAIL); Wed, 11 Nov 2020 09:10:36 -0500 Received: from SCSQMBX10.ad.analog.com (10.77.17.5) by SCSQMBX10.ad.analog.com (10.77.17.5) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.1.1779.2; Wed, 11 Nov 2020 06:10:34 -0800 Received: from zeus.spd.analog.com (10.66.68.11) by SCSQMBX10.ad.analog.com (10.77.17.5) with Microsoft SMTP Server id 15.1.1779.2 via Frontend Transport; Wed, 11 Nov 2020 06:10:34 -0800 Received: from localhost.localdomain ([10.48.65.12]) by zeus.spd.analog.com (8.15.1/8.15.1) with ESMTP id 0ABEAVc7003735; Wed, 11 Nov 2020 09:10:31 -0500 From: Alexandru Ardelean To: , CC: , , , Alexandru Ardelean Subject: [PATCH] spi: Add SPI_NO_TX/RX support Date: Wed, 11 Nov 2020 16:15:29 +0200 Message-ID: <20201111141529.98147-1-alexandru.ardelean@analog.com> X-Mailer: git-send-email 2.17.1 MIME-Version: 1.0 X-Proofpoint-Virus-Version: vendor=fsecure engine=2.50.10434:6.0.312,18.0.737 definitions=2020-11-11_06:2020-11-10,2020-11-11 signatures=0 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 malwarescore=0 priorityscore=1501 mlxlogscore=858 clxscore=1011 lowpriorityscore=0 suspectscore=0 bulkscore=0 impostorscore=0 adultscore=0 spamscore=0 mlxscore=0 phishscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.12.0-2009150000 definitions=main-2011110082 Precedence: bulk List-ID: X-Mailing-List: linux-spi@vger.kernel.org From: Dragos Bogdan Transmit/receive only is a valid SPI mode. For example, the MOSI/TX line might be missing from an ADC while for a DAC the MISO/RX line may be optional. This patch adds these two new modes: SPI_NO_TX and SPI_NO_RX. This way, the drivers will be able to identify if any of these two lines is missing and to adjust the transfers accordingly. Signed-off-by: Dragos Bogdan Signed-off-by: Alexandru Ardelean --- drivers/spi/spi.c | 25 ++++++++++++++++++++----- include/linux/spi/spi.h | 2 ++ 2 files changed, 22 insertions(+), 5 deletions(-) diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 22679c8645db..fc12fcf11126 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -1934,6 +1934,9 @@ static int of_spi_parse_dt(struct spi_controller *ctlr, struct spi_device *spi, /* Device DUAL/QUAD mode */ if (!of_property_read_u32(nc, "spi-tx-bus-width", &value)) { switch (value) { + case 0: + spi->mode |= SPI_NO_TX; + break; case 1: break; case 2: @@ -1955,6 +1958,9 @@ static int of_spi_parse_dt(struct spi_controller *ctlr, struct spi_device *spi, if (!of_property_read_u32(nc, "spi-rx-bus-width", &value)) { switch (value) { + case 0: + spi->mode |= SPI_NO_RX; + break; case 1: break; case 2: @@ -3275,12 +3281,16 @@ int spi_setup(struct spi_device *spi) unsigned bad_bits, ugly_bits; int status; - /* check mode to prevent that DUAL and QUAD set at the same time + /* check mode to prevent that any two of DUAL, QUAD and NO_MOSI/MISO + * are set at the same time */ - if (((spi->mode & SPI_TX_DUAL) && (spi->mode & SPI_TX_QUAD)) || - ((spi->mode & SPI_RX_DUAL) && (spi->mode & SPI_RX_QUAD))) { + if ((hweight_long(spi->mode & + (SPI_TX_DUAL | SPI_TX_QUAD | SPI_NO_TX)) > 1) || + (hweight_long(spi->mode & + (SPI_RX_DUAL | SPI_RX_QUAD | SPI_NO_RX)) > 1)) { dev_err(&spi->dev, - "setup: can not select dual and quad at the same time\n"); + "setup: can not select any two of dual, quad and no-rx/tx " + "at the same time\n"); return -EINVAL; } /* if it is SPI_3WIRE mode, DUAL and QUAD should be forbidden @@ -3294,7 +3304,8 @@ int spi_setup(struct spi_device *spi) * SPI_CS_WORD has a fallback software implementation, * so it is ignored here. */ - bad_bits = spi->mode & ~(spi->controller->mode_bits | SPI_CS_WORD); + bad_bits = spi->mode & ~(spi->controller->mode_bits | SPI_CS_WORD | + SPI_NO_TX | SPI_NO_RX); /* nothing prevents from working with active-high CS in case if it * is driven by GPIO. */ @@ -3550,6 +3561,8 @@ static int __spi_validate(struct spi_device *spi, struct spi_message *message) * 2. check tx/rx_nbits match the mode in spi_device */ if (xfer->tx_buf) { + if (spi->mode & SPI_NO_TX) + return -EINVAL; if (xfer->tx_nbits != SPI_NBITS_SINGLE && xfer->tx_nbits != SPI_NBITS_DUAL && xfer->tx_nbits != SPI_NBITS_QUAD) @@ -3563,6 +3576,8 @@ static int __spi_validate(struct spi_device *spi, struct spi_message *message) } /* check transfer rx_nbits */ if (xfer->rx_buf) { + if (spi->mode & SPI_NO_RX) + return -EINVAL; if (xfer->rx_nbits != SPI_NBITS_SINGLE && xfer->rx_nbits != SPI_NBITS_DUAL && xfer->rx_nbits != SPI_NBITS_QUAD) diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index 99380c0825db..2e9058f79b2d 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -185,6 +185,8 @@ struct spi_device { #define SPI_TX_OCTAL 0x2000 /* transmit with 8 wires */ #define SPI_RX_OCTAL 0x4000 /* receive with 8 wires */ #define SPI_3WIRE_HIZ 0x8000 /* high impedance turnaround */ +#define SPI_NO_TX 0x10000 /* no transmit wire */ +#define SPI_NO_RX 0x20000 /* no receive wire */ int irq; void *controller_state; void *controller_data;