diff mbox series

[v3,2/3] mtd: spinand: use the spi-mem poll status APIs

Message ID 20210518093951.23136-3-patrice.chotard@foss.st.com (mailing list archive)
State Superseded
Headers show
Series MTD: spinand: Add spi_mem_poll_status() support | expand

Commit Message

Patrice CHOTARD May 18, 2021, 9:39 a.m. UTC 
From: Patrice Chotard <patrice.chotard@foss.st.com>

Make use of spi-mem poll status APIs to let advanced controllers
optimize wait operations.

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com>
---
Changes in v3:
  - Add initial_delay_us and polling_delay_us parameters to spinand_wait()
  - Add SPINAND_READ/WRITE/ERASE/RESET_INITIAL_DELAY_US and
    SPINAND_READ/WRITE/ERASE/RESET_POLL_DELAY_US defines.

Changes in v2:
  - non-offload case is now managed by spi_mem_poll_status()

 drivers/mtd/nand/spi/core.c | 45 ++++++++++++++++++++++++++-----------
 include/linux/mtd/spinand.h | 11 ++++++++-
 2 files changed, 42 insertions(+), 14 deletions(-)

Comments

Boris Brezillon May 18, 2021, 11:28 a.m. UTC | #1 
On Tue, 18 May 2021 11:39:50 +0200
<patrice.chotard@foss.st.com> wrote:

> From: Patrice Chotard <patrice.chotard@foss.st.com>
> 
> Make use of spi-mem poll status APIs to let advanced controllers
> optimize wait operations.

This should also fix the high CPU usage you were reporting for those
that don't have a dedicated STATUS poll block logic, which is great!

> 
> Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
> Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com>
> ---
> Changes in v3:
>   - Add initial_delay_us and polling_delay_us parameters to spinand_wait()
>   - Add SPINAND_READ/WRITE/ERASE/RESET_INITIAL_DELAY_US and
>     SPINAND_READ/WRITE/ERASE/RESET_POLL_DELAY_US defines.
> 
> Changes in v2:
>   - non-offload case is now managed by spi_mem_poll_status()
> 
>  drivers/mtd/nand/spi/core.c | 45 ++++++++++++++++++++++++++-----------
>  include/linux/mtd/spinand.h | 11 ++++++++-
>  2 files changed, 42 insertions(+), 14 deletions(-)
> 
> diff --git a/drivers/mtd/nand/spi/core.c b/drivers/mtd/nand/spi/core.c
> index 17f63f95f4a2..ef2a692ab5b6 100644
> --- a/drivers/mtd/nand/spi/core.c
> +++ b/drivers/mtd/nand/spi/core.c
> @@ -473,20 +473,26 @@ static int spinand_erase_op(struct spinand_device *spinand,
>  	return spi_mem_exec_op(spinand->spimem, &op);
>  }
>  
> -static int spinand_wait(struct spinand_device *spinand, u8 *s)
> +static int spinand_wait(struct spinand_device *spinand,
> +			unsigned long initial_delay_us,
> +			unsigned long poll_delay_us,
> +			u8 *s)
>  {
> -	unsigned long timeo =  jiffies + msecs_to_jiffies(400);
> +	struct spi_mem_op op = SPINAND_GET_FEATURE_OP(REG_STATUS,
> +						      spinand->scratchbuf);
>  	u8 status;
>  	int ret;
>  
> -	do {
> -		ret = spinand_read_status(spinand, &status);
> -		if (ret)
> -			return ret;
> +	ret = spi_mem_poll_status(spinand->spimem, &op, STATUS_BUSY, 0,
> +				  initial_delay_us,
> +				  poll_delay_us,
> +				  SPINAND_STATUS_TIMEOUT_MS);
> +	if (ret)
> +		return ret;
>  
> -		if (!(status & STATUS_BUSY))
> -			goto out;
> -	} while (time_before(jiffies, timeo));
> +	status = *spinand->scratchbuf;
> +	if (!(status & STATUS_BUSY))
> +		goto out;
>  
>  	/*
>  	 * Extra read, just in case the STATUS_READY bit has changed
> @@ -526,7 +532,10 @@ static int spinand_reset_op(struct spinand_device *spinand)
>  	if (ret)
>  		return ret;
>  
> -	return spinand_wait(spinand, NULL);
> +	return spinand_wait(spinand,
> +			    SPINAND_RESET_INITIAL_DELAY_US,
> +			    SPINAND_RESET_POLL_DELAY_US,
> +			    NULL);
>  }
>  
>  static int spinand_lock_block(struct spinand_device *spinand, u8 lock)
> @@ -549,7 +558,10 @@ static int spinand_read_page(struct spinand_device *spinand,
>  	if (ret)
>  		return ret;
>  
> -	ret = spinand_wait(spinand, &status);
> +	ret = spinand_wait(spinand,
> +			   SPINAND_READ_INITIAL_DELAY_US,
> +			   SPINAND_READ_POLL_DELAY_US,
> +			   &status);
>  	if (ret < 0)
>  		return ret;
>  
> @@ -585,7 +597,10 @@ static int spinand_write_page(struct spinand_device *spinand,
>  	if (ret)
>  		return ret;
>  
> -	ret = spinand_wait(spinand, &status);
> +	ret = spinand_wait(spinand,
> +			   SPINAND_WRITE_INITIAL_DELAY_US,
> +			   SPINAND_WRITE_POLL_DELAY_US,
> +			   &status);
>  	if (!ret && (status & STATUS_PROG_FAILED))
>  		return -EIO;
>  
> @@ -768,7 +783,11 @@ static int spinand_erase(struct nand_device *nand, const struct nand_pos *pos)
>  	if (ret)
>  		return ret;
>  
> -	ret = spinand_wait(spinand, &status);
> +	ret = spinand_wait(spinand,
> +			   SPINAND_ERASE_INITIAL_DELAY_US,
> +			   SPINAND_ERASE_POLL_DELAY_US,
> +			   &status);
> +
>  	if (!ret && (status & STATUS_ERASE_FAILED))
>  		ret = -EIO;
>  
> diff --git a/include/linux/mtd/spinand.h b/include/linux/mtd/spinand.h
> index 6bb92f26833e..180c1fa64e62 100644
> --- a/include/linux/mtd/spinand.h
> +++ b/include/linux/mtd/spinand.h
> @@ -169,7 +169,16 @@
>  struct spinand_op;
>  struct spinand_device;
>  
> -#define SPINAND_MAX_ID_LEN	4
> +#define SPINAND_MAX_ID_LEN		4
> +#define SPINAND_READ_INITIAL_DELAY_US	6
> +#define SPINAND_READ_POLL_DELAY_US	5
> +#define SPINAND_RESET_INITIAL_DELAY_US	5
> +#define SPINAND_RESET_POLL_DELAY_US	5
> +#define SPINAND_WRITE_INITIAL_DELAY_US	75
> +#define SPINAND_WRITE_POLL_DELAY_US	15
> +#define SPINAND_ERASE_INITIAL_DELAY_US	250
> +#define SPINAND_ERASE_POLL_DELAY_US	50

Could you add a comment explaining where those numbers come from?

> +#define SPINAND_STATUS_TIMEOUT_MS	400

I would name that one SPINAND_WAITRDY_TIMEOUT_MS.

>  
>  /**
>   * struct spinand_id - SPI NAND id structure
Patrice CHOTARD May 18, 2021, 11:50 a.m. UTC | #2 
Hi 

On 5/18/21 1:28 PM, Boris Brezillon wrote:
> On Tue, 18 May 2021 11:39:50 +0200
> <patrice.chotard@foss.st.com> wrote:
> 
>> From: Patrice Chotard <patrice.chotard@foss.st.com>
>>
>> Make use of spi-mem poll status APIs to let advanced controllers
>> optimize wait operations.
> 
> This should also fix the high CPU usage you were reporting for those
> that don't have a dedicated STATUS poll block logic, which is great!

I will update the commit message by indicating what you mention here.

> 
>>
>> Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
>> Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com>
>> ---
>> Changes in v3:
>>   - Add initial_delay_us and polling_delay_us parameters to spinand_wait()
>>   - Add SPINAND_READ/WRITE/ERASE/RESET_INITIAL_DELAY_US and
>>     SPINAND_READ/WRITE/ERASE/RESET_POLL_DELAY_US defines.
>>
>> Changes in v2:
>>   - non-offload case is now managed by spi_mem_poll_status()
>>
>>  drivers/mtd/nand/spi/core.c | 45 ++++++++++++++++++++++++++-----------
>>  include/linux/mtd/spinand.h | 11 ++++++++-
>>  2 files changed, 42 insertions(+), 14 deletions(-)
>>
>> diff --git a/drivers/mtd/nand/spi/core.c b/drivers/mtd/nand/spi/core.c
>> index 17f63f95f4a2..ef2a692ab5b6 100644
>> --- a/drivers/mtd/nand/spi/core.c
>> +++ b/drivers/mtd/nand/spi/core.c
>> @@ -473,20 +473,26 @@ static int spinand_erase_op(struct spinand_device *spinand,
>>  	return spi_mem_exec_op(spinand->spimem, &op);
>>  }
>>  
>> -static int spinand_wait(struct spinand_device *spinand, u8 *s)
>> +static int spinand_wait(struct spinand_device *spinand,
>> +			unsigned long initial_delay_us,
>> +			unsigned long poll_delay_us,
>> +			u8 *s)
>>  {
>> -	unsigned long timeo =  jiffies + msecs_to_jiffies(400);
>> +	struct spi_mem_op op = SPINAND_GET_FEATURE_OP(REG_STATUS,
>> +						      spinand->scratchbuf);
>>  	u8 status;
>>  	int ret;
>>  
>> -	do {
>> -		ret = spinand_read_status(spinand, &status);
>> -		if (ret)
>> -			return ret;
>> +	ret = spi_mem_poll_status(spinand->spimem, &op, STATUS_BUSY, 0,
>> +				  initial_delay_us,
>> +				  poll_delay_us,
>> +				  SPINAND_STATUS_TIMEOUT_MS);
>> +	if (ret)
>> +		return ret;
>>  
>> -		if (!(status & STATUS_BUSY))
>> -			goto out;
>> -	} while (time_before(jiffies, timeo));
>> +	status = *spinand->scratchbuf;
>> +	if (!(status & STATUS_BUSY))
>> +		goto out;
>>  
>>  	/*
>>  	 * Extra read, just in case the STATUS_READY bit has changed
>> @@ -526,7 +532,10 @@ static int spinand_reset_op(struct spinand_device *spinand)
>>  	if (ret)
>>  		return ret;
>>  
>> -	return spinand_wait(spinand, NULL);
>> +	return spinand_wait(spinand,
>> +			    SPINAND_RESET_INITIAL_DELAY_US,
>> +			    SPINAND_RESET_POLL_DELAY_US,
>> +			    NULL);
>>  }
>>  
>>  static int spinand_lock_block(struct spinand_device *spinand, u8 lock)
>> @@ -549,7 +558,10 @@ static int spinand_read_page(struct spinand_device *spinand,
>>  	if (ret)
>>  		return ret;
>>  
>> -	ret = spinand_wait(spinand, &status);
>> +	ret = spinand_wait(spinand,
>> +			   SPINAND_READ_INITIAL_DELAY_US,
>> +			   SPINAND_READ_POLL_DELAY_US,
>> +			   &status);
>>  	if (ret < 0)
>>  		return ret;
>>  
>> @@ -585,7 +597,10 @@ static int spinand_write_page(struct spinand_device *spinand,
>>  	if (ret)
>>  		return ret;
>>  
>> -	ret = spinand_wait(spinand, &status);
>> +	ret = spinand_wait(spinand,
>> +			   SPINAND_WRITE_INITIAL_DELAY_US,
>> +			   SPINAND_WRITE_POLL_DELAY_US,
>> +			   &status);
>>  	if (!ret && (status & STATUS_PROG_FAILED))
>>  		return -EIO;
>>  
>> @@ -768,7 +783,11 @@ static int spinand_erase(struct nand_device *nand, const struct nand_pos *pos)
>>  	if (ret)
>>  		return ret;
>>  
>> -	ret = spinand_wait(spinand, &status);
>> +	ret = spinand_wait(spinand,
>> +			   SPINAND_ERASE_INITIAL_DELAY_US,
>> +			   SPINAND_ERASE_POLL_DELAY_US,
>> +			   &status);
>> +
>>  	if (!ret && (status & STATUS_ERASE_FAILED))
>>  		ret = -EIO;
>>  
>> diff --git a/include/linux/mtd/spinand.h b/include/linux/mtd/spinand.h
>> index 6bb92f26833e..180c1fa64e62 100644
>> --- a/include/linux/mtd/spinand.h
>> +++ b/include/linux/mtd/spinand.h
>> @@ -169,7 +169,16 @@
>>  struct spinand_op;
>>  struct spinand_device;
>>  
>> -#define SPINAND_MAX_ID_LEN	4
>> +#define SPINAND_MAX_ID_LEN		4
>> +#define SPINAND_READ_INITIAL_DELAY_US	6
>> +#define SPINAND_READ_POLL_DELAY_US	5
>> +#define SPINAND_RESET_INITIAL_DELAY_US	5
>> +#define SPINAND_RESET_POLL_DELAY_US	5
>> +#define SPINAND_WRITE_INITIAL_DELAY_US	75
>> +#define SPINAND_WRITE_POLL_DELAY_US	15
>> +#define SPINAND_ERASE_INITIAL_DELAY_US	250
>> +#define SPINAND_ERASE_POLL_DELAY_US	50
> 
> Could you add a comment explaining where those numbers come from?

Sure

> 
>> +#define SPINAND_STATUS_TIMEOUT_MS	400
> 
> I would name that one SPINAND_WAITRDY_TIMEOUT_MS.
Ok

> 
>>  
>>  /**
>>   * struct spinand_id - SPI NAND id structure
> 

Thanks 
Patrice
diff mbox series

Patch

diff --git a/drivers/mtd/nand/spi/core.c b/drivers/mtd/nand/spi/core.c
index 17f63f95f4a2..ef2a692ab5b6 100644
--- a/drivers/mtd/nand/spi/core.c
+++ b/drivers/mtd/nand/spi/core.c
@@ -473,20 +473,26 @@  static int spinand_erase_op(struct spinand_device *spinand,
 	return spi_mem_exec_op(spinand->spimem, &op);
 }
 
-static int spinand_wait(struct spinand_device *spinand, u8 *s)
+static int spinand_wait(struct spinand_device *spinand,
+			unsigned long initial_delay_us,
+			unsigned long poll_delay_us,
+			u8 *s)
 {
-	unsigned long timeo =  jiffies + msecs_to_jiffies(400);
+	struct spi_mem_op op = SPINAND_GET_FEATURE_OP(REG_STATUS,
+						      spinand->scratchbuf);
 	u8 status;
 	int ret;
 
-	do {
-		ret = spinand_read_status(spinand, &status);
-		if (ret)
-			return ret;
+	ret = spi_mem_poll_status(spinand->spimem, &op, STATUS_BUSY, 0,
+				  initial_delay_us,
+				  poll_delay_us,
+				  SPINAND_STATUS_TIMEOUT_MS);
+	if (ret)
+		return ret;
 
-		if (!(status & STATUS_BUSY))
-			goto out;
-	} while (time_before(jiffies, timeo));
+	status = *spinand->scratchbuf;
+	if (!(status & STATUS_BUSY))
+		goto out;
 
 	/*
 	 * Extra read, just in case the STATUS_READY bit has changed
@@ -526,7 +532,10 @@  static int spinand_reset_op(struct spinand_device *spinand)
 	if (ret)
 		return ret;
 
-	return spinand_wait(spinand, NULL);
+	return spinand_wait(spinand,
+			    SPINAND_RESET_INITIAL_DELAY_US,
+			    SPINAND_RESET_POLL_DELAY_US,
+			    NULL);
 }
 
 static int spinand_lock_block(struct spinand_device *spinand, u8 lock)
@@ -549,7 +558,10 @@  static int spinand_read_page(struct spinand_device *spinand,
 	if (ret)
 		return ret;
 
-	ret = spinand_wait(spinand, &status);
+	ret = spinand_wait(spinand,
+			   SPINAND_READ_INITIAL_DELAY_US,
+			   SPINAND_READ_POLL_DELAY_US,
+			   &status);
 	if (ret < 0)
 		return ret;
 
@@ -585,7 +597,10 @@  static int spinand_write_page(struct spinand_device *spinand,
 	if (ret)
 		return ret;
 
-	ret = spinand_wait(spinand, &status);
+	ret = spinand_wait(spinand,
+			   SPINAND_WRITE_INITIAL_DELAY_US,
+			   SPINAND_WRITE_POLL_DELAY_US,
+			   &status);
 	if (!ret && (status & STATUS_PROG_FAILED))
 		return -EIO;
 
@@ -768,7 +783,11 @@  static int spinand_erase(struct nand_device *nand, const struct nand_pos *pos)
 	if (ret)
 		return ret;
 
-	ret = spinand_wait(spinand, &status);
+	ret = spinand_wait(spinand,
+			   SPINAND_ERASE_INITIAL_DELAY_US,
+			   SPINAND_ERASE_POLL_DELAY_US,
+			   &status);
+
 	if (!ret && (status & STATUS_ERASE_FAILED))
 		ret = -EIO;
 
diff --git a/include/linux/mtd/spinand.h b/include/linux/mtd/spinand.h
index 6bb92f26833e..180c1fa64e62 100644
--- a/include/linux/mtd/spinand.h
+++ b/include/linux/mtd/spinand.h
@@ -169,7 +169,16 @@ 
 struct spinand_op;
 struct spinand_device;
 
-#define SPINAND_MAX_ID_LEN	4
+#define SPINAND_MAX_ID_LEN		4
+#define SPINAND_READ_INITIAL_DELAY_US	6
+#define SPINAND_READ_POLL_DELAY_US	5
+#define SPINAND_RESET_INITIAL_DELAY_US	5
+#define SPINAND_RESET_POLL_DELAY_US	5
+#define SPINAND_WRITE_INITIAL_DELAY_US	75
+#define SPINAND_WRITE_POLL_DELAY_US	15
+#define SPINAND_ERASE_INITIAL_DELAY_US	250
+#define SPINAND_ERASE_POLL_DELAY_US	50
+#define SPINAND_STATUS_TIMEOUT_MS	400
 
 /**
  * struct spinand_id - SPI NAND id structure