[v2] spi: st-ssc4: Covert to use GPIO descriptors

Commit Message

Linus Walleij Feb. 1, 2022, 1:26 a.m. UTC

This switches the ST SSC SPI controller to use GPIO
descriptors from the core instead of GPIO numbers.
It is already using the core parsing of GPIO numbers
so the switch is pretty straight-forward.

Cc: Lee Jones <[e-mail]>
Signed-off-by: Linus Walleij <[e-mail]>
---
ChangeLog v1->v2:
- Get rid of a dangling "ret" variable causing build
  noise.
---
 drivers/spi/spi-st-ssc4.c | 31 ++++---------------------------
 1 file changed, 4 insertions(+), 27 deletions(-)

Comments

Mark Brown Feb. 1, 2022, 5:18 p.m. UTC | #1

On Tue, 1 Feb 2022 02:26:54 +0100, Linus Walleij wrote:
> This switches the ST SSC SPI controller to use GPIO
> descriptors from the core instead of GPIO numbers.
> It is already using the core parsing of GPIO numbers
> so the switch is pretty straight-forward.
> 
> 

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next

Thanks!

[1/1] spi: st-ssc4: Covert to use GPIO descriptors
      commit: 321599693213c81b2ce8530abb27e39528e969f9

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

Patch

diff --git a/drivers/spi/spi-st-ssc4.c b/drivers/spi/spi-st-ssc4.c
index 6c44dda9ee8c..843be803696b 100644
--- a/drivers/spi/spi-st-ssc4.c
+++ b/drivers/spi/spi-st-ssc4.c
@@ -17,7 +17,6 @@ 
 #include <linux/pinctrl/consumer.h>
 #include <linux/platform_device.h>
 #include <linux/of.h>
-#include <linux/of_gpio.h>
 #include <linux/of_irq.h>
 #include <linux/pm_runtime.h>
 #include <linux/spi/spi.h>
@@ -171,11 +170,6 @@  static int spi_st_transfer_one(struct spi_master *master,
 	return t->len;
 }
 
-static void spi_st_cleanup(struct spi_device *spi)
-{
-	gpio_free(spi->cs_gpio);
-}
-
 /* the spi->mode bits understood by this driver: */
 #define MODEBITS  (SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST | SPI_LOOP | SPI_CS_HIGH)
 static int spi_st_setup(struct spi_device *spi)
@@ -183,29 +177,17 @@  static int spi_st_setup(struct spi_device *spi)
 	struct spi_st *spi_st = spi_master_get_devdata(spi->master);
 	u32 spi_st_clk, sscbrg, var;
 	u32 hz = spi->max_speed_hz;
-	int cs = spi->cs_gpio;
-	int ret;
 
 	if (!hz)  {
 		dev_err(&spi->dev, "max_speed_hz unspecified\n");
 		return -EINVAL;
 	}
 
-	if (!gpio_is_valid(cs)) {
-		dev_err(&spi->dev, "%d is not a valid gpio\n", cs);
+	if (!spi->cs_gpiod) {
+		dev_err(&spi->dev, "no valid gpio assigned\n");
 		return -EINVAL;
 	}
 
-	ret = gpio_request(cs, dev_name(&spi->dev));
-	if (ret) {
-		dev_err(&spi->dev, "could not request gpio:%d\n", cs);
-		return ret;
-	}
-
-	ret = gpio_direction_output(cs, spi->mode & SPI_CS_HIGH);
-	if (ret)
-		goto out_free_gpio;
-
 	spi_st_clk = clk_get_rate(spi_st->clk);
 
 	/* Set SSC_BRF */
@@ -213,8 +195,7 @@  static int spi_st_setup(struct spi_device *spi)
 	if (sscbrg < 0x07 || sscbrg > BIT(16)) {
 		dev_err(&spi->dev,
 			"baudrate %d outside valid range %d\n", sscbrg, hz);
-		ret = -EINVAL;
-		goto out_free_gpio;
+		return -EINVAL;
 	}
 
 	spi_st->baud = spi_st_clk / (2 * sscbrg);
@@ -263,10 +244,6 @@  static int spi_st_setup(struct spi_device *spi)
 	readl_relaxed(spi_st->base + SSC_RBUF);
 
 	return 0;
-
-out_free_gpio:
-	gpio_free(cs);
-	return ret;
 }
 
 /* Interrupt fired when TX shift register becomes empty */
@@ -309,11 +286,11 @@  static int spi_st_probe(struct platform_device *pdev)
 	master->dev.of_node		= np;
 	master->mode_bits		= MODEBITS;
 	master->setup			= spi_st_setup;
-	master->cleanup			= spi_st_cleanup;
 	master->transfer_one		= spi_st_transfer_one;
 	master->bits_per_word_mask	= SPI_BPW_MASK(8) | SPI_BPW_MASK(16);
 	master->auto_runtime_pm		= true;
 	master->bus_num			= pdev->id;
+	master->use_gpio_descriptors	= true;
 	spi_st				= spi_master_get_devdata(master);
 
 	spi_st->clk = devm_clk_get(&pdev->dev, "ssc");