new file mode 100644
@@ -0,0 +1,33 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/nvidia,tegra210-quad-peripheral-props.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Peripheral properties for Tegra Quad SPI Controller
+
+maintainers:
+ - Thierry Reding <thierry.reding@gmail.com>
+ - Jonathan Hunter <jonathanh@nvidia.com>
+
+properties:
+ nvidia,tx-clk-tap-delay:
+ description:
+ Delays the clock going out to device with this tap value.
+ Tap value varies based on platform design trace lengths from Tegra
+ QSPI to corresponding slave device.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 31
+
+ nvidia,rx-clk-tap-delay:
+ description:
+ Delays the clock coming in from the device with this tap value.
+ Tap value varies based on platform design trace lengths from Tegra
+ QSPI to corresponding slave device.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 255
+
+unevaluatedProperties: true
+
@@ -57,27 +57,6 @@ patternProperties:
spi-tx-bus-width:
enum: [1, 2, 4]
- nvidia,tx-clk-tap-delay:
- description:
- Delays the clock going out to device with this tap value.
- Tap value varies based on platform design trace lengths from Tegra
- QSPI to corresponding slave device.
- $ref: /schemas/types.yaml#/definitions/uint32
- minimum: 0
- maximum: 31
-
- nvidia,rx-clk-tap-delay:
- description:
- Delays the clock coming in from the device with this tap value.
- Tap value varies based on platform design trace lengths from Tegra
- QSPI to corresponding slave device.
- $ref: /schemas/types.yaml#/definitions/uint32
- minimum: 0
- maximum: 255
-
- required:
- - reg
-
required:
- compatible
- reg
@@ -112,5 +112,6 @@ properties:
allOf:
- $ref: cdns,qspi-nor-peripheral-props.yaml#
- $ref: samsung,spi-peripheral-props.yaml#
+ - $ref: nvidia,tegra210-quad-peripheral-props.yaml#
additionalProperties: true
Move peripheral properties for Tegra QSPI controller to nvidia,tegra210-quad-peripheral-props.yaml and add reference to spi-peripheral-props.yaml file. Signed-off-by: Krishna Yarlagadda <kyarlagadda@nvidia.com> --- ...nvidia,tegra210-quad-peripheral-props.yaml | 33 +++++++++++++++++++ .../bindings/spi/nvidia,tegra210-quad.yaml | 21 ------------ .../bindings/spi/spi-peripheral-props.yaml | 1 + 3 files changed, 34 insertions(+), 21 deletions(-) create mode 100644 Documentation/devicetree/bindings/spi/nvidia,tegra210-quad-peripheral-props.yaml