@@ -58,6 +58,9 @@
#define SPI_CHIP_SEL_COUNT 7
#define VENDOR_ID_MCHP 0x1055
+#define SPI_SUSPEND_CONFIG 0x101
+#define SPI_RESUME_CONFIG 0x303
+
struct pci1xxxx_spi_internal {
u8 hw_inst;
int irq;
@@ -364,10 +367,82 @@ static int pci1xxxx_spi_probe(struct pci_dev *pdev, const struct pci_device_id *
return ret;
}
+static void store_restore_config(struct pci1xxxx_spi *spi_ptr,
+ struct pci1xxxx_spi_internal *spi_sub_ptr,
+ u8 inst, bool store)
+{
+ u32 regval;
+
+ if (store) {
+ regval = readl(spi_ptr->reg_base +
+ SPI_MST_CTL_REG_OFFSET(spi_sub_ptr->hw_inst));
+ regval &= SPI_MST_CTL_DEVSEL_MASK;
+ spi_sub_ptr->prev_val.dev_sel = (regval >> 25) & 7;
+ regval = readl(spi_ptr->reg_base +
+ SPI_PCI_CTRL_REG_OFFSET(spi_sub_ptr->hw_inst));
+ regval &= SPI_MSI_VECTOR_SEL_MASK;
+ spi_sub_ptr->prev_val.msi_vector_sel = (regval >> 4) & 1;
+ } else {
+ regval = readl(spi_ptr->reg_base + SPI_MST_CTL_REG_OFFSET(inst));
+ regval &= ~SPI_MST_CTL_DEVSEL_MASK;
+ regval |= (spi_sub_ptr->prev_val.dev_sel << 25);
+ writel(regval,
+ spi_ptr->reg_base + SPI_MST_CTL_REG_OFFSET(inst));
+ writel((spi_sub_ptr->prev_val.msi_vector_sel << 4),
+ spi_ptr->reg_base + SPI_PCI_CTRL_REG_OFFSET(inst));
+ }
+}
+
+static int pci1xxxx_spi_resume(struct device *dev)
+{
+ struct pci1xxxx_spi *spi_ptr = dev_get_drvdata(dev);
+ struct pci1xxxx_spi_internal *spi_sub_ptr;
+ u32 regval = SPI_RESUME_CONFIG;
+ u8 iter;
+
+ for (iter = 0; iter < spi_ptr->total_hw_instances; iter++) {
+ spi_sub_ptr = spi_ptr->spi_int[iter];
+ spi_master_resume(spi_sub_ptr->spi_host);
+ writel(regval, spi_ptr->reg_base +
+ SPI_MST_EVENT_MASK_REG_OFFSET(iter));
+
+ /* Restore config at resume */
+ store_restore_config(spi_ptr, spi_sub_ptr, iter, 0);
+ }
+
+ return 0;
+}
+
+static int pci1xxxx_spi_suspend(struct device *dev)
+{
+ struct pci1xxxx_spi *spi_ptr = dev_get_drvdata(dev);
+ struct pci1xxxx_spi_internal *spi_sub_ptr;
+ u32 reg1 = SPI_SUSPEND_CONFIG;
+ u8 iter;
+
+ for (iter = 0; iter < spi_ptr->total_hw_instances; iter++) {
+ spi_sub_ptr = spi_ptr->spi_int[iter];
+
+ /* Store existing config before suspend */
+ store_restore_config(spi_ptr, spi_sub_ptr, iter, 1);
+ spi_master_suspend(spi_sub_ptr->spi_host);
+ writel(reg1, spi_ptr->reg_base +
+ SPI_MST_EVENT_MASK_REG_OFFSET(iter));
+ }
+
+ return 0;
+}
+
+static DEFINE_SIMPLE_DEV_PM_OPS(spi_pm_ops, pci1xxxx_spi_suspend,
+ pci1xxxx_spi_resume);
+
static struct pci_driver pci1xxxx_spi_driver = {
.name = DRV_NAME,
.id_table = pci1xxxx_spi_pci_id_table,
.probe = pci1xxxx_spi_probe,
+ .driver = {
+ .pm = pm_sleep_ptr(&spi_pm_ops),
+ },
};
module_pci_driver(pci1xxxx_spi_driver);
Implement suspend, resume callbacks, store config at suspend and restore config at time of resume Signed-off-by: Tharun Kumar P <tharunkumar.pasumarthi@microchip.com> --- drivers/spi/spi-pci1xxxx.c | 75 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 75 insertions(+)