| Message ID | 20230224154941.68587-4-kyarlagadda@nvidia.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Tegra TPM driver with HW flow control | expand |
On Fri, Feb 24, 2023 at 09:19:41PM +0530, Krishna Yarlagadda wrote: > Tegra QSPI controller only supports half duplex transfers. > Set half duplex constrain flag. This was already applied I think? If any changes are required to what was applied please send an incremental patch.
> -----Original Message----- > From: Mark Brown <broonie@kernel.org> > Sent: 24 February 2023 22:08 > To: Krishna Yarlagadda <kyarlagadda@nvidia.com> > Cc: robh+dt@kernel.org; peterhuewe@gmx.de; jgg@ziepe.ca; > jarkko@kernel.org; krzysztof.kozlowski+dt@linaro.org; linux- > spi@vger.kernel.org; linux-tegra@vger.kernel.org; linux- > integrity@vger.kernel.org; linux-kernel@vger.kernel.org; > thierry.reding@gmail.com; Jonathan Hunter <jonathanh@nvidia.com>; > Sowjanya Komatineni <skomatineni@nvidia.com>; Laxman Dewangan > <ldewangan@nvidia.com> > Subject: Re: [Patch V4 3/3] spi: tegra210-quad: set half duplex flag > > On Fri, Feb 24, 2023 at 09:19:41PM +0530, Krishna Yarlagadda wrote: > > Tegra QSPI controller only supports half duplex transfers. > > Set half duplex constrain flag. > > This was already applied I think? If any changes are required to what > was applied please send an incremental patch. Dropped wrong patch. Will take care in next version.
diff --git a/drivers/spi/spi-tegra210-quad.c b/drivers/spi/spi-tegra210-quad.c index 39dec2dc161b..fe15fa6eecd1 100644 --- a/drivers/spi/spi-tegra210-quad.c +++ b/drivers/spi/spi-tegra210-quad.c @@ -1553,6 +1553,7 @@ static int tegra_qspi_probe(struct platform_device *pdev) master->mode_bits = SPI_MODE_0 | SPI_MODE_3 | SPI_CS_HIGH | SPI_TX_DUAL | SPI_RX_DUAL | SPI_TX_QUAD | SPI_RX_QUAD; master->bits_per_word_mask = SPI_BPW_MASK(32) | SPI_BPW_MASK(16) | SPI_BPW_MASK(8); + master->flags = SPI_CONTROLLER_HALF_DUPLEX; master->setup = tegra_qspi_setup; master->transfer_one_message = tegra_qspi_transfer_one_message; master->num_chipselect = 1;
Tegra QSPI controller only supports half duplex transfers. Set half duplex constrain flag. Signed-off-by: Krishna Yarlagadda <kyarlagadda@nvidia.com> --- drivers/spi/spi-tegra210-quad.c | 1 + 1 file changed, 1 insertion(+)