diff mbox series

[SPI,for-next,3/3] spi: mchp-pci1xxxx: Fix improper implementation of disabling chip select lines

Message ID 20230404171613.1336093-4-tharunkumar.pasumarthi@microchip.com (mailing list archive)
State Accepted
Commit 45d2af82e0e6f662d0d0db20993b35cb1d8da646
Headers show
Series spi: mchp-pci1xxxx: Fix minor bugs in spi-pci1xxxx driver | expand

Commit Message

Tharun Kumar P April 4, 2023, 5:16 p.m. UTC 
Hardware does not have support to disable individual chip select lines.
Disable all chip select lines by using SPI_FORCE_CE bit.

Fixes: 1cc0cbea7167 ("spi: microchip: pci1xxxx: Add driver for SPI controller of PCI1XXXX PCIe switch")
Signed-off-by: Tharun Kumar P <tharunkumar.pasumarthi@microchip.com>
---
 drivers/spi/spi-pci1xxxx.c | 17 +++++------------
 1 file changed, 5 insertions(+), 12 deletions(-)
diff mbox series

Patch

diff --git a/drivers/spi/spi-pci1xxxx.c b/drivers/spi/spi-pci1xxxx.c
index 82d4bfeea1fa..4445d82409d6 100644
--- a/drivers/spi/spi-pci1xxxx.c
+++ b/drivers/spi/spi-pci1xxxx.c
@@ -114,17 +114,14 @@  static void pci1xxxx_spi_set_cs(struct spi_device *spi, bool enable)
 
 	/* Set the DEV_SEL bits of the SPI_MST_CTL_REG */
 	regval = readl(par->reg_base + SPI_MST_CTL_REG_OFFSET(p->hw_inst));
-	if (enable) {
+	if (!enable) {
+		regval |= SPI_FORCE_CE;
 		regval &= ~SPI_MST_CTL_DEVSEL_MASK;
 		regval |= (spi_get_chipselect(spi, 0) << 25);
-		writel(regval,
-		       par->reg_base + SPI_MST_CTL_REG_OFFSET(p->hw_inst));
 	} else {
-		regval &= ~(spi_get_chipselect(spi, 0) << 25);
-		writel(regval,
-		       par->reg_base + SPI_MST_CTL_REG_OFFSET(p->hw_inst));
-
+		regval &= ~SPI_FORCE_CE;
 	}
+	writel(regval, par->reg_base + SPI_MST_CTL_REG_OFFSET(p->hw_inst));
 }
 
 static u8 pci1xxxx_get_clock_div(u32 hz)
@@ -199,7 +196,7 @@  static int pci1xxxx_spi_transfer_one(struct spi_controller *spi_ctlr,
 			else
 				regval &= ~SPI_MST_CTL_MODE_SEL;
 
-			regval |= ((clkdiv << 5) | SPI_FORCE_CE);
+			regval |= (clkdiv << 5);
 			regval &= ~SPI_MST_CTL_CMD_LEN_MASK;
 			regval |= (len << 8);
 			writel(regval, par->reg_base +
@@ -223,10 +220,6 @@  static int pci1xxxx_spi_transfer_one(struct spi_controller *spi_ctlr,
 			}
 		}
 	}
-
-	regval = readl(par->reg_base + SPI_MST_CTL_REG_OFFSET(p->hw_inst));
-	regval &= ~SPI_FORCE_CE;
-	writel(regval, par->reg_base + SPI_MST_CTL_REG_OFFSET(p->hw_inst));
 	p->spi_xfer_in_progress = false;
 
 	return 0;