From patchwork Fri Mar 15 18:49:05 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Ayush Singh X-Patchwork-Id: 13593901 Received: from mail-pf1-f176.google.com (mail-pf1-f176.google.com [209.85.210.176]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 3986A54BFF; Fri, 15 Mar 2024 18:50:35 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=209.85.210.176 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1710528640; cv=none; b=guBHTGx9pipGg/PL25WvX8YvkI2M8+4pzfnrSuO/2VjJyK9A9rMNBKvk2AJuWqZSFCnY0D4W3xnqxNXb7m4XTM/5+8nuPSCEKTF8U8TE1BzQ7i6MZofIo2w88mmJA8QjTQTcX+nr35QeouBm2CCadi8mdbqK5TFW4DBqT/849Kk= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1710528640; c=relaxed/simple; bh=kFQBiuri4m776gOwS+ygG0tyAeEvje7rOeXQ0QCJANA=; h=From:To:Cc:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version; b=StWUA9HJ1hvoGd+aH2H8NSK0mSikcCGfrttXVypAYLNi7LmZeUNKoC4jnKZcOCVP8O22d0PWmlwaW/IZpXykSCMsD+ONWeV8dZ0PawB9jQ9AA2ChMwwILj+seWkU3/XM2HAHZvO3AttMEkZnuPWC5DmFUuE83ZXZKA/AFJ3EI7s= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com; spf=pass smtp.mailfrom=gmail.com; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b=AVCmF8rv; arc=none smtp.client-ip=209.85.210.176 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=gmail.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b="AVCmF8rv" Received: by mail-pf1-f176.google.com with SMTP id d2e1a72fcca58-6da202aa138so1453323b3a.2; Fri, 15 Mar 2024 11:50:35 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20230601; t=1710528633; x=1711133433; darn=vger.kernel.org; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=I9UjJ7GsfcyWYu7K9Rx0VvyWCR0FVADYowXJP0DCHdw=; b=AVCmF8rvLhZvw2xU9xJsAUXkw7mL2QUFYSaCEoPmRojMGuaSoBR7SH8pKPZ27F7nfQ yH1RfrpkjyI7ny0vRQahyh9If+xS+++fuzQV/arSAfI6GiPT61RIKPind0TlyUuuNRdi 6kdTjauAFWr0ZZCwF6ql62852fIWiYhbv8yY9d98jfBYU7pfsqmpP9mwRvzIQd1NCXyw 2a2TN3kiaR+edik0QQ4hI45FeVGLpM09ZWuaLqvK9VFIYk1eiZvh75vfdm5cyTuhVuRg WnRA/lt0/FySRsvoZ8yTbYSfH2q3IDZO0lRCIR7tXwczNJzqgLiXFfR0H4mOlqmkhtp0 3wOg== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1710528633; x=1711133433; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=I9UjJ7GsfcyWYu7K9Rx0VvyWCR0FVADYowXJP0DCHdw=; b=hzpO55bhRopCm8awcGCe6tZeXxrheoHB2ooBBLtM1mtDS4uYdFz6gaZYCtBGra0Eyq cnBIqtDskohY6sjXo6rGUdTkkPH5mU3MGijpg58OB7YhaGMkmqNRfaccTPM2nysq3pWS yMRsbFf/IvfhKbm7zVk+atwedlvy5d2HHW7PU3YUSI1dZVIKBErS/pamh3N5sbRmiRJT RE/ONHAzCR4i9o/0veyqwpgzQzWwqcDfVsJu7/+Dk4HndptNegzEXbNoJL04nHdzFw2A cykoXD4YlriqBUD0eQbNXwXM5V0wySajCr5Eu4s2hS2jAee6SgE4/6OZL/kBXgdYvErH AGLw== X-Forwarded-Encrypted: i=1; AJvYcCXY2RSt06/1D3pxKSsOX8g3W19ahpMqD4K4FlY2/IB/l9W+S9TlNcmYOP2VUWsmeZOTQJsUfHhzCx+ZhOetMmXjI8zDJtSj3UxiX9mBcYWoxiH80HHgEkX/h2mjdqti+bqVSJuBZ6PImtflmsa5+zjwtGMRsr+B91BP8t0z4XvmiqUAkw== X-Gm-Message-State: AOJu0YxBOdX3JMNHiDLdV0mzc4Zz3+uE1Dp/wD98yIbk/PV6PVjv/ymg 6iCw4CifJOFdwj5xYzPl+nZKSwRLCvyF2pvwvSqEvcGfk4wAkN2JH2ytFPmGAexo1g== X-Google-Smtp-Source: AGHT+IHIK2oeyfiUn0JBesE1uDiyFTvFVanUxllwDGEKH8lwSZ7ATWmd7nm7r8oEXCgcS5WKonCljw== X-Received: by 2002:a05:6a20:8e19:b0:1a3:49e9:1b6f with SMTP id y25-20020a056a208e1900b001a349e91b6fmr5070984pzj.8.1710528628351; Fri, 15 Mar 2024 11:50:28 -0700 (PDT) Received: from toolbox.iitism.net ([103.15.228.94]) by smtp.gmail.com with ESMTPSA id f17-20020a056a0022d100b006e6cc998be8sm3580784pfj.207.2024.03.15.11.50.19 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Fri, 15 Mar 2024 11:50:27 -0700 (PDT) From: Ayush Singh To: linux-kernel@vger.kernel.org Cc: Ayush Singh , jkridner@beagleboard.org, robertcnelson@beagleboard.org, Vaishnav M A , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Nishanth Menon , Vignesh Raghavendra , Tero Kristo , Derek Kiernan , Dragan Cvetic , Arnd Bergmann , Greg Kroah-Hartman , Liam Girdwood , Mark Brown , Jiri Slaby , Johan Hovold , Alex Elder , devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-spi@vger.kernel.org, linux-serial@vger.kernel.org, greybus-dev@lists.linaro.org Subject: [PATCH v3 7/8] mikrobus: Add mikrobus driver Date: Sat, 16 Mar 2024 00:19:05 +0530 Message-ID: <20240315184908.500352-8-ayushdevel1325@gmail.com> X-Mailer: git-send-email 2.44.0 In-Reply-To: <20240315184908.500352-1-ayushdevel1325@gmail.com> References: <20240315184908.500352-1-ayushdevel1325@gmail.com> Precedence: bulk X-Mailing-List: linux-spi@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 - Setup I2C, SPI, serdev controllers associated with mikrobus connector - Check if a board with valid mikroBUS manifest is connected - Parse the manifest and register the device to kernel Signed-off-by: Vaishnav M A Signed-off-by: Ayush Singh --- MAINTAINERS | 1 + drivers/misc/Kconfig | 1 + drivers/misc/Makefile | 1 + drivers/misc/mikrobus/Kconfig | 19 + drivers/misc/mikrobus/Makefile | 6 + drivers/misc/mikrobus/mikrobus_core.c | 942 ++++++++++++++++++++++ drivers/misc/mikrobus/mikrobus_core.h | 201 +++++ drivers/misc/mikrobus/mikrobus_id.c | 229 ++++++ drivers/misc/mikrobus/mikrobus_manifest.c | 502 ++++++++++++ drivers/misc/mikrobus/mikrobus_manifest.h | 20 + 10 files changed, 1922 insertions(+) create mode 100644 drivers/misc/mikrobus/Kconfig create mode 100644 drivers/misc/mikrobus/Makefile create mode 100644 drivers/misc/mikrobus/mikrobus_core.c create mode 100644 drivers/misc/mikrobus/mikrobus_core.h create mode 100644 drivers/misc/mikrobus/mikrobus_id.c create mode 100644 drivers/misc/mikrobus/mikrobus_manifest.c create mode 100644 drivers/misc/mikrobus/mikrobus_manifest.h diff --git a/MAINTAINERS b/MAINTAINERS index 69418a058c6b..83bc5e48bef9 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -14772,6 +14772,7 @@ M: Ayush Singh M: Vaishnav M A S: Maintained F: Documentation/devicetree/bindings/misc/mikrobus-connector.yaml +F: drivers/misc/mikrobus/* MIKROTIK CRS3XX 98DX3236 BOARD SUPPORT M: Luka Kovacic diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 4fb291f0bf7c..3d5c36205c6c 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -591,4 +591,5 @@ source "drivers/misc/cardreader/Kconfig" source "drivers/misc/uacce/Kconfig" source "drivers/misc/pvpanic/Kconfig" source "drivers/misc/mchp_pci1xxxx/Kconfig" +source "drivers/misc/mikrobus/Kconfig" endmenu diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index ea6ea5bbbc9c..b9ac88055b87 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -68,3 +68,4 @@ obj-$(CONFIG_TMR_INJECT) += xilinx_tmr_inject.o obj-$(CONFIG_TPS6594_ESM) += tps6594-esm.o obj-$(CONFIG_TPS6594_PFSM) += tps6594-pfsm.o obj-$(CONFIG_NSM) += nsm.o +obj-y += mikrobus/ diff --git a/drivers/misc/mikrobus/Kconfig b/drivers/misc/mikrobus/Kconfig new file mode 100644 index 000000000000..f0770006b4fe --- /dev/null +++ b/drivers/misc/mikrobus/Kconfig @@ -0,0 +1,19 @@ +menuconfig MIKROBUS + tristate "Module for instantiating devices on mikroBUS ports" + depends on GPIOLIB + depends on W1 + depends on W1_MASTER_GPIO + help + This option enables the mikroBUS driver. mikroBUS is an add-on + board socket standard that offers maximum expandability with + the smallest number of pins. The mikroBUS driver instantiates + devices on a mikroBUS port described by identifying data present + in an add-on board resident EEPROM, more details on the mikroBUS + driver support and discussion can be found in this eLinux wiki : + elinux.org/Mikrobus + + + Say Y here to enable support for this driver. + + To compile this code as a module, chose M here: the module + will be called mikrobus.ko diff --git a/drivers/misc/mikrobus/Makefile b/drivers/misc/mikrobus/Makefile new file mode 100644 index 000000000000..c89ff2abb80e --- /dev/null +++ b/drivers/misc/mikrobus/Makefile @@ -0,0 +1,6 @@ +# SPDX-License-Identifier: GPL-2.0 +# mikroBUS Core + +obj-$(CONFIG_MIKROBUS) += mikrobus.o +mikrobus-y := mikrobus_core.o mikrobus_manifest.o +obj-$(CONFIG_MIKROBUS) += mikrobus_id.o diff --git a/drivers/misc/mikrobus/mikrobus_core.c b/drivers/misc/mikrobus/mikrobus_core.c new file mode 100644 index 000000000000..17718ed315b9 --- /dev/null +++ b/drivers/misc/mikrobus/mikrobus_core.c @@ -0,0 +1,942 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * mikroBUS driver for instantiating add-on + * board devices with an identifier EEPROM + * + * Copyright 2020 Vaishnav M A, BeagleBoard.org Foundation. + * Copyright 2024 Ayush Singh + */ + +#define pr_fmt(fmt) "mikrobus:%s: " fmt, __func__ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "mikrobus_core.h" +#include "mikrobus_manifest.h" + +#define MIKROBUS_ID_EEPROM_MANIFEST_ADDR 0x20 + +static DEFINE_MUTEX(core_lock); +static DEFINE_IDR(mikrobus_port_idr); +static struct class_compat *mikrobus_port_compat_class; +int __mikrobus_first_dynamic_bus_num; +static bool is_registered; +static int mikrobus_port_id_eeprom_probe(struct mikrobus_port *port); + +const char *MIKROBUS_PINCTRL_STR[] = { "pwm", "uart", "i2c", "spi" }; + +const struct bus_type mikrobus_bus_type = { + .name = "mikrobus", +}; +EXPORT_SYMBOL_GPL(mikrobus_bus_type); + +int mikrobus_port_scan_eeprom(struct mikrobus_port *port) +{ + const u16 manifest_start_addr = MIKROBUS_ID_EEPROM_MANIFEST_ADDR; + struct addon_board_info *board; + int manifest_size, retval; + char header[12], *buf; + + if (port->skip_scan) + return -EINVAL; + + retval = nvmem_device_read(port->eeprom, manifest_start_addr, 12, header); + if (retval != 12) { + return dev_err_probe(&port->dev, -EINVAL, "failed to fetch manifest header %d\n", + retval); + } + + manifest_size = mikrobus_manifest_header_validate(header, 12); + if (manifest_size < 0) { + return dev_err_probe(&port->dev, -EINVAL, "invalid manifest size %d\n", + manifest_size); + } + + buf = kzalloc(manifest_size, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + retval = nvmem_device_read(port->eeprom, manifest_start_addr, manifest_size, buf); + if (retval != manifest_size) { + retval = + dev_err_probe(&port->dev, -EINVAL, "failed to fetch manifest %d\n", retval); + goto err_free_buf; + } + + board = kzalloc(sizeof(*board), GFP_KERNEL); + if (!board) { + retval = -ENOMEM; + goto err_free_buf; + } + + w1_reset_bus(port->w1_master); + /* set RST HIGH */ + gpiod_direction_output(port->gpios->desc[MIKROBUS_PIN_RST], 1); + set_bit(W1_ABORT_SEARCH, &port->w1_master->flags); + + INIT_LIST_HEAD(&board->manifest_descs); + INIT_LIST_HEAD(&board->devices); + retval = mikrobus_manifest_parse(board, buf, manifest_size); + if (!retval) { + retval = dev_err_probe(&port->dev, -EINVAL, "failed to parse manifest, size %d\n", + manifest_size); + goto err_free_board; + } + + retval = mikrobus_board_register(port, board); + if (retval) { + dev_err(&port->dev, "failed to register board %s\n", board->name); + goto err_free_board; + } + + kfree(buf); + return 0; + +err_free_board: + kfree(board); +err_free_buf: + kfree(buf); + return retval; +} +EXPORT_SYMBOL_GPL(mikrobus_port_scan_eeprom); + +static ssize_t name_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + return sprintf(buf, "%s\n", to_mikrobus_port(dev)->name); +} +static DEVICE_ATTR_RO(name); + +static ssize_t new_device_store(struct device *dev, struct device_attribute *attr, const char *buf, + size_t count) +{ + struct mikrobus_port *port = to_mikrobus_port(dev); + struct addon_board_info *board; + int retval; + + if (port->board) + return dev_err_probe(dev, -EBUSY, "already has board registered\n"); + + board = kzalloc(sizeof(*board), GFP_KERNEL); + if (!board) + return -ENOMEM; + + INIT_LIST_HEAD(&board->manifest_descs); + INIT_LIST_HEAD(&board->devices); + retval = mikrobus_manifest_parse(board, (void *)buf, count); + if (!retval) { + retval = dev_err_probe(dev, -EINVAL, "failed to parse manifest\n"); + goto err_free_board; + } + + retval = mikrobus_board_register(port, board); + if (retval) { + retval = dev_err_probe(dev, -EINVAL, "failed to register board %s\n", board->name); + goto err_free_board; + } + + return count; + +err_free_board: + kfree(board); + return retval; +} +static DEVICE_ATTR_WO(new_device); + +static ssize_t delete_device_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct mikrobus_port *port = to_mikrobus_port(dev); + unsigned long id; + + if (kstrtoul(buf, 0, &id)) + return dev_err_probe(dev, -EINVAL, "cannot parse board id"); + + if (!port->board) + return dev_err_probe(dev, -ENODEV, "does not have registered boards"); + + mikrobus_board_unregister(port, port->board); + return count; +} +static DEVICE_ATTR_IGNORE_LOCKDEP(delete_device, 0200, NULL, delete_device_store); + +static struct attribute *mikrobus_port_attrs[] = { &dev_attr_new_device.attr, + &dev_attr_delete_device.attr, + &dev_attr_name.attr, NULL }; +ATTRIBUTE_GROUPS(mikrobus_port); + +static void mikrobus_port_release(struct device *dev) +{ + struct mikrobus_port *port = to_mikrobus_port(dev); + + mutex_lock(&core_lock); + idr_remove(&mikrobus_port_idr, port->id); + mutex_unlock(&core_lock); + + kfree(port); +} + +const struct device_type mikrobus_port_type = { + .groups = mikrobus_port_groups, + .release = mikrobus_port_release, +}; +EXPORT_SYMBOL_GPL(mikrobus_port_type); + +static int mikrobus_w1_master_match(struct device *dev, const void *data) +{ + struct mikrobus_port *port; + + if (dev->type != &mikrobus_port_type) + return 0; + + port = to_mikrobus_port(dev); + + return port->w1_master == data; +} + +struct mikrobus_port *mikrobus_find_port_by_w1_master(struct w1_master *master) +{ + struct device *dev; + + dev = bus_find_device(&mikrobus_bus_type, NULL, master, mikrobus_w1_master_match); + if (!dev) + return NULL; + + return (dev->type == &mikrobus_port_type) ? to_mikrobus_port(dev) : NULL; +} +EXPORT_SYMBOL(mikrobus_find_port_by_w1_master); + +int mikrobus_port_pinctrl_select(struct mikrobus_port *port) +{ + struct pinctrl_state *state; + int retval, i; + + for (i = 0; i < MIKROBUS_NUM_PINCTRL_STATE; i++) { + state = pinctrl_lookup_state(port->pinctrl, port->pinctrl_selected[i]); + if (!IS_ERR(state)) { + retval = pinctrl_select_state(port->pinctrl, state); + if (retval) { + return dev_err_probe(&port->dev, retval, + "failed to select state %s\n", + port->pinctrl_selected[i]); + } + dev_dbg(&port->dev, "setting pinctrl %s\n", port->pinctrl_selected[i]); + } else { + return dev_err_probe(&port->dev, PTR_ERR(state), + "failed to find state %s\n", + port->pinctrl_selected[i]); + } + } + + return 0; +} +EXPORT_SYMBOL_GPL(mikrobus_port_pinctrl_select); + +static int mikrobus_port_pinctrl_setup(struct mikrobus_port *port, struct addon_board_info *board) +{ + int retval; + + if (board->pin_state[MIKROBUS_PIN_PWM] == MIKROBUS_STATE_PWM) + sprintf(port->pinctrl_selected[MIKROBUS_PINCTRL_PWM], "%s_%s", + MIKROBUS_PINCTRL_STR[MIKROBUS_PINCTRL_PWM], PINCTRL_STATE_DEFAULT); + else + sprintf(port->pinctrl_selected[MIKROBUS_PINCTRL_PWM], "%s_%s", + MIKROBUS_PINCTRL_STR[MIKROBUS_PINCTRL_PWM], MIKROBUS_PINCTRL_STATE_GPIO); + + if (board->pin_state[MIKROBUS_PIN_RX] == MIKROBUS_STATE_UART) + sprintf(port->pinctrl_selected[MIKROBUS_PINCTRL_UART], "%s_%s", + MIKROBUS_PINCTRL_STR[MIKROBUS_PINCTRL_UART], PINCTRL_STATE_DEFAULT); + else + sprintf(port->pinctrl_selected[MIKROBUS_PINCTRL_UART], "%s_%s", + MIKROBUS_PINCTRL_STR[MIKROBUS_PINCTRL_UART], MIKROBUS_PINCTRL_STATE_GPIO); + + if (board->pin_state[MIKROBUS_PIN_SCL] == MIKROBUS_STATE_I2C) + sprintf(port->pinctrl_selected[MIKROBUS_PINCTRL_I2C], "%s_%s", + MIKROBUS_PINCTRL_STR[MIKROBUS_PINCTRL_I2C], PINCTRL_STATE_DEFAULT); + else + sprintf(port->pinctrl_selected[MIKROBUS_PINCTRL_I2C], "%s_%s", + MIKROBUS_PINCTRL_STR[MIKROBUS_PINCTRL_I2C], MIKROBUS_PINCTRL_STATE_GPIO); + + if (board->pin_state[MIKROBUS_PIN_MOSI] == MIKROBUS_STATE_SPI) + sprintf(port->pinctrl_selected[MIKROBUS_PINCTRL_SPI], "%s_%s", + MIKROBUS_PINCTRL_STR[MIKROBUS_PINCTRL_SPI], PINCTRL_STATE_DEFAULT); + else + sprintf(port->pinctrl_selected[MIKROBUS_PINCTRL_SPI], "%s_%s", + MIKROBUS_PINCTRL_STR[MIKROBUS_PINCTRL_SPI], MIKROBUS_PINCTRL_STATE_GPIO); + + retval = mikrobus_port_pinctrl_select(port); + if (retval) + dev_err(&port->dev, "failed to select pinctrl states [%d]", retval); + + return retval; +} + +static int mikrobus_irq_get(struct mikrobus_port *port, int irqno, int irq_type) +{ + int irq; + + if (irqno > port->gpios->ndescs - 1) + return dev_err_probe(&port->dev, -ENODEV, "GPIO %d does not exist", irqno); + + irq = gpiod_to_irq(port->gpios->desc[irqno]); + if (irq < 0) + return dev_err_probe(&port->dev, -EINVAL, "could not get irq %d", irqno); + + irq_set_irq_type(irq, irq_type); + + return irq; +} + +static int mikrobus_gpio_setup(struct gpio_desc *gpio, int gpio_state) +{ + switch (gpio_state) { + case MIKROBUS_STATE_INPUT: + return gpiod_direction_input(gpio); + case MIKROBUS_STATE_OUTPUT_HIGH: + return gpiod_direction_output(gpio, 1); + case MIKROBUS_STATE_OUTPUT_LOW: + return gpiod_direction_output(gpio, 0); + case MIKROBUS_STATE_PWM: + case MIKROBUS_STATE_SPI: + case MIKROBUS_STATE_I2C: + default: + return 0; + } +} + +static char *mikrobus_gpio_chip_name_get(struct mikrobus_port *port, int gpio) +{ + struct gpio_chip *gpiochip; + + if (gpio > port->gpios->ndescs - 1) + return NULL; + + gpiochip = gpiod_to_chip(port->gpios->desc[gpio]); + return kmemdup(gpiochip->label, MIKROBUS_NAME_SIZE, GFP_KERNEL); +} + +static int mikrobus_gpio_hwnum_get(struct mikrobus_port *port, int gpio) +{ + struct gpio_chip *gpiochip; + + if (gpio > port->gpios->ndescs - 1) + return -ENODEV; + + gpiochip = gpiod_to_chip(port->gpios->desc[gpio]); + return desc_to_gpio(port->gpios->desc[gpio]) - gpiochip->base; +} + +static void mikrobus_board_device_release_all(struct addon_board_info *info) +{ + struct board_device_info *dev, *next; + + list_for_each_entry_safe(dev, next, &info->devices, links) { + list_del(&dev->links); + kfree(dev); + } +} + +static int mikrobus_device_register(struct mikrobus_port *port, struct board_device_info *dev, + char *board_name) +{ + struct regulator_consumer_supply regulator; + struct gpiod_lookup_table *lookup; + char devname[MIKROBUS_NAME_SIZE]; + struct spi_board_info *spi_info; + struct i2c_board_info *i2c_info; + struct serdev_device *serdev; + struct platform_device *pdev; + struct fwnode_handle *fwnode; + struct spi_device *spi; + int i, retval; + u64 *val; + + dev_info(&port->dev, "registering device : %s", dev->drv_name); + + if (dev->gpio_lookup) { + lookup = dev->gpio_lookup; + + switch (dev->protocol) { + case GREYBUS_PROTOCOL_SPI: + snprintf(devname, sizeof(devname), "%s.%u", dev_name(&port->spi_ctrl->dev), + port->chip_select[dev->reg]); + lookup->dev_id = kmemdup(devname, MIKROBUS_NAME_SIZE, GFP_KERNEL); + break; + case GREYBUS_PROTOCOL_RAW: + snprintf(devname, sizeof(devname), "%s.%u", dev->drv_name, dev->reg); + lookup->dev_id = kmemdup(devname, MIKROBUS_NAME_SIZE, GFP_KERNEL); + break; + default: + lookup->dev_id = dev->drv_name; + } + + dev_info(&port->dev, "adding lookup table : %s", lookup->dev_id); + + for (i = 0; i < dev->num_gpio_resources; i++) { + lookup->table[i].key = + mikrobus_gpio_chip_name_get(port, lookup->table[i].chip_hwnum); + lookup->table[i].chip_hwnum = + mikrobus_gpio_hwnum_get(port, lookup->table[i].chip_hwnum); + } + + gpiod_add_lookup_table(lookup); + } + + if (dev->regulators) { + if (dev->protocol == GREYBUS_PROTOCOL_SPI) { + snprintf(devname, sizeof(devname), "%s.%u", dev_name(&port->spi_ctrl->dev), + port->chip_select[dev->reg]); + regulator.dev_name = kmemdup(devname, MIKROBUS_NAME_SIZE, GFP_KERNEL); + } else if (dev->protocol == GREYBUS_PROTOCOL_RAW) { + snprintf(devname, sizeof(devname), "%s.%u", dev->drv_name, dev->reg); + regulator.dev_name = kmemdup(devname, MIKROBUS_NAME_SIZE, GFP_KERNEL); + } else { + regulator.dev_name = dev->drv_name; + } + + for (i = 0; i < dev->num_regulators; i++) { + val = dev->regulators[i].value.u64_data; + regulator.supply = + kmemdup(dev->regulators[i].name, MIKROBUS_NAME_SIZE, GFP_KERNEL); + dev_info(&port->dev, "adding fixed regulator %llu uv, %s for %s", *val, + regulator.supply, regulator.dev_name); + regulator_register_always_on(0, dev->regulators[i].name, ®ulator, 1, + *val); + } + } + + switch (dev->protocol) { + case GREYBUS_PROTOCOL_SPI: + spi_info = kzalloc(sizeof(*spi_info), GFP_KERNEL); + strscpy_pad(spi_info->modalias, dev->drv_name, sizeof(spi_info->modalias) - 1); + if (dev->irq) + spi_info->irq = mikrobus_irq_get(port, dev->irq, dev->irq_type); + if (dev->properties) { + fwnode = fwnode_create_software_node(dev->properties, NULL); + spi_info->swnode = to_software_node(fwnode); + } + spi_info->chip_select = port->chip_select[dev->reg]; + spi_info->max_speed_hz = dev->max_speed_hz; + spi_info->mode = dev->mode; + + spi = spi_new_device(port->spi_ctrl, spi_info); + if (!spi) + return dev_err_probe(&port->dev, -ENOMEM, "failed to create spi device"); + + if (dev->clocks) { + for (i = 0; i < dev->num_clocks; i++) { + val = dev->clocks[i].value.u64_data; + dev_info(&port->dev, "adding fixed clock %s, %llu hz", + dev->clocks[i].name, *val); + clk_register_fixed_rate(&spi->dev, dev->clocks[i].name, devname, 0, + *val); + } + } + + dev->dev_client = (void *)spi; + break; + case GREYBUS_PROTOCOL_I2C: + i2c_info = kzalloc(sizeof(*i2c_info), GFP_KERNEL); + if (!i2c_info) + return -ENOMEM; + + strscpy_pad(i2c_info->type, dev->drv_name, sizeof(i2c_info->type) - 1); + if (dev->irq) + i2c_info->irq = mikrobus_irq_get(port, dev->irq, dev->irq_type); + if (dev->properties) { + fwnode = fwnode_create_software_node(dev->properties, NULL); + i2c_info->swnode = to_software_node(fwnode); + } + i2c_info->addr = dev->reg; + dev->dev_client = (void *)i2c_new_client_device(port->i2c_adap, i2c_info); + break; + case GREYBUS_PROTOCOL_RAW: + pdev = platform_device_alloc(dev->drv_name, 0); + if (!pdev) + return -ENOMEM; + + if (dev->properties) { + retval = device_create_managed_software_node(&pdev->dev, dev->properties, + NULL); + if (retval) + return dev_err_probe(&port->dev, retval, + "failed to create software node"); + } + dev->dev_client = pdev; + platform_device_add(dev->dev_client); + break; + case GREYBUS_PROTOCOL_UART: + serdev = serdev_device_alloc(port->ser_ctrl); + if (!serdev) + return -ENOMEM; + + if (dev->properties) + device_create_managed_software_node(&serdev->dev, dev->properties, NULL); + + dev->dev_client = serdev; + serdev_device_add(serdev); + break; + default: + return -EINVAL; + } + + return 0; +} + +static void mikrobus_device_unregister(struct mikrobus_port *port, struct board_device_info *dev, + char *board_name) +{ + dev_info(&port->dev, "removing device %s\n", dev->drv_name); + if (dev->gpio_lookup) { + gpiod_remove_lookup_table(dev->gpio_lookup); + kfree(dev->gpio_lookup); + } + + kfree(dev->properties); + + switch (dev->protocol) { + case GREYBUS_PROTOCOL_SPI: + spi_unregister_device((struct spi_device *)dev->dev_client); + break; + case GREYBUS_PROTOCOL_I2C: + i2c_unregister_device((struct i2c_client *)dev->dev_client); + break; + case GREYBUS_PROTOCOL_RAW: + platform_device_unregister((struct platform_device *)dev->dev_client); + break; + case GREYBUS_PROTOCOL_UART: + serdev_device_remove((struct serdev_device *)dev->dev_client); + break; + } +} + +int mikrobus_board_register(struct mikrobus_port *port, struct addon_board_info *board) +{ + struct board_device_info *devinfo, *next; + int retval, i; + + if (WARN_ON(list_empty(&board->devices))) + return false; + + if (port->pinctrl) { + retval = mikrobus_port_pinctrl_setup(port, board); + if (retval) + dev_err(&port->dev, "failed to setup pinctrl state [%d]", retval); + } + + if (port->gpios) { + for (i = 0; i < port->gpios->ndescs; i++) { + retval = mikrobus_gpio_setup(port->gpios->desc[i], board->pin_state[i]); + if (retval) + dev_err(&port->dev, "failed to setup gpio %d, state %d", i, + board->pin_state[i]); + + gpiochip_free_own_desc(port->gpios->desc[i]); + } + } + + list_for_each_entry_safe(devinfo, next, &board->devices, links) + mikrobus_device_register(port, devinfo, board->name); + + port->board = board; + return 0; +} +EXPORT_SYMBOL_GPL(mikrobus_board_register); + +void mikrobus_board_unregister(struct mikrobus_port *port, struct addon_board_info *board) +{ + struct board_device_info *devinfo, *next; + + if (WARN_ON(list_empty(&board->devices))) + return; + + list_for_each_entry_safe(devinfo, next, &board->devices, links) + mikrobus_device_unregister(port, devinfo, board->name); + + mikrobus_board_device_release_all(board); + kfree(board); + port->board = NULL; +} +EXPORT_SYMBOL_GPL(mikrobus_board_unregister); + +static int mikrobus_port_id_eeprom_probe(struct mikrobus_port *port) +{ + static const char drvname[MIKROBUS_NAME_SIZE] = "w1-gpio\0"; + struct platform_device *mikrobus_id_eeprom_w1_device; + struct gpiod_lookup_table *lookup; + char devname[MIKROBUS_NAME_SIZE]; + struct w1_bus_master *bm; + int retval; + + sprintf(port->pinctrl_selected[MIKROBUS_PINCTRL_SPI], "%s_%s", + MIKROBUS_PINCTRL_STR[MIKROBUS_PINCTRL_SPI], MIKROBUS_PINCTRL_STATE_GPIO); + + retval = mikrobus_port_pinctrl_select(port); + + /* set RST LOW */ + gpiod_direction_output(port->gpios->desc[MIKROBUS_PIN_RST], 0); + + lookup = kzalloc(struct_size(lookup, table, 1), GFP_KERNEL); + if (!lookup) + return -ENOMEM; + + retval = snprintf(devname, sizeof(devname), "%s.%u", drvname, port->id); + lookup->dev_id = kmemdup(devname, retval + 1, GFP_KERNEL); + lookup->table[0].key = mikrobus_gpio_chip_name_get(port, MIKROBUS_PIN_CS); + lookup->table[0].flags = GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN; + lookup->table[0].chip_hwnum = mikrobus_gpio_hwnum_get(port, MIKROBUS_PIN_CS); + + gpiochip_free_own_desc(port->gpios->desc[MIKROBUS_PIN_CS]); + gpiod_add_lookup_table(lookup); + + mikrobus_id_eeprom_w1_device = platform_device_register_simple(drvname, port->id, NULL, 0); + if (IS_ERR(mikrobus_id_eeprom_w1_device)) { + retval = PTR_ERR(mikrobus_id_eeprom_w1_device); + dev_err(&port->dev, "failed to register w1-gpio device %d", retval); + goto early_exit; + } + + port->w1_gpio = mikrobus_id_eeprom_w1_device; + + bm = (struct w1_bus_master *)platform_get_drvdata(mikrobus_id_eeprom_w1_device); + if (!bm) { + dev_err(&port->dev, "failed to get w1_bus_master"); + return 0; + } + + port->w1_master = w1_find_master_device(bm); + if (!port->w1_master) { + dev_err(&port->dev, "failed to find W1 GPIO master, port [%s]", port->name); + goto early_exit; + } + + port->w1_master->search_count = 4; + + return 0; + +early_exit: + gpiod_remove_lookup_table(lookup); + kfree(lookup); + return -ENODEV; +} + +int mikrobus_port_register(struct mikrobus_port *port) +{ + struct device *dev = &port->dev; + int retval, id; + + if (WARN_ON(!is_registered)) + return -EAGAIN; + + if (dev->of_node) { + id = of_alias_get_id(dev->of_node, "mikrobus"); + if (id >= 0) { + port->id = id; + mutex_lock(&core_lock); + id = idr_alloc(&mikrobus_port_idr, port, port->id, port->id + 1, + GFP_KERNEL); + mutex_unlock(&core_lock); + if (WARN(id < 0, "couldn't get idr")) + return id == -ENOSPC ? -EBUSY : id; + } + } else { + mutex_lock(&core_lock); + id = idr_alloc(&mikrobus_port_idr, port, __mikrobus_first_dynamic_bus_num, 0, + GFP_KERNEL); + mutex_unlock(&core_lock); + if (id < 0) + return id; + + port->id = id; + } + + port->dev.bus = &mikrobus_bus_type; + port->dev.type = &mikrobus_port_type; + strscpy_pad(port->name, "mikrobus-port", sizeof(port->name) - 1); + dev_set_name(&port->dev, "mikrobus-%d", port->id); + dev_info(&port->dev, "registering port mikrobus-%d ", port->id); + + retval = device_register(&port->dev); + if (retval) { + dev_err(&port->dev, "port '%d': can't register device (%d)", port->id, retval); + put_device(&port->dev); + return retval; + } + + retval = class_compat_create_link(mikrobus_port_compat_class, &port->dev, port->dev.parent); + if (retval) + dev_warn(&port->dev, "failed to create compatibility class link"); + + if (!port->w1_master) { + dev_info(&port->dev, "mikrobus port %d eeprom empty probing default eeprom", + port->id); + mutex_lock(&core_lock); + retval = mikrobus_port_id_eeprom_probe(port); + mutex_unlock(&core_lock); + } + + return retval; +} +EXPORT_SYMBOL_GPL(mikrobus_port_register); + +void mikrobus_port_delete(struct mikrobus_port *port) +{ + struct mikrobus_port *found; + + mutex_lock(&core_lock); + found = idr_find(&mikrobus_port_idr, port->id); + mutex_unlock(&core_lock); + if (found != port) { + pr_err("port [%s] not registered", port->name); + return; + } + + if (port->board) { + dev_err(&port->dev, "attempting to delete port with registered boards, port [%s]\n", + port->name); + return; + } + + if (port->eeprom) { + nvmem_device_put(port->eeprom); + platform_device_unregister(port->w1_gpio); + } + + class_compat_remove_link(mikrobus_port_compat_class, &port->dev, port->dev.parent); + device_unregister(&port->dev); + mutex_lock(&core_lock); + idr_remove(&mikrobus_port_idr, port->id); + mutex_unlock(&core_lock); + memset(&port->dev, 0, sizeof(port->dev)); +} +EXPORT_SYMBOL_GPL(mikrobus_port_delete); + +static int mikrobus_port_probe_pinctrl_setup(struct mikrobus_port *port) +{ + struct device *dev = port->dev.parent; + struct pinctrl_state *state; + int retval, i; + + state = pinctrl_lookup_state(port->pinctrl, PINCTRL_STATE_DEFAULT); + if (!IS_ERR(state)) { + retval = pinctrl_select_state(port->pinctrl, state); + if (retval) { + return dev_err_probe(dev, retval, "Failed to select state %s\n", + PINCTRL_STATE_DEFAULT); + } + } else { + return dev_err_probe(dev, PTR_ERR(state), "failed to find state %s\n", + PINCTRL_STATE_DEFAULT); + } + + for (i = 0; i < MIKROBUS_NUM_PINCTRL_STATE; i++) { + port->pinctrl_selected[i] = kmalloc(MIKROBUS_PINCTRL_NAME_SIZE, GFP_KERNEL); + sprintf(port->pinctrl_selected[i], "%s_%s", MIKROBUS_PINCTRL_STR[i], + PINCTRL_STATE_DEFAULT); + } + + retval = mikrobus_port_pinctrl_select(port); + if (retval) + dev_err(dev, "failed to select pinctrl states [%d]", retval); + + return retval; +} + +static int mikrobus_port_probe(struct platform_device *pdev) +{ + struct device_node *i2c_adap_np, *uart_np, *spi_np; + struct device *dev = &pdev->dev; + struct mikrobus_port *port; + int retval; + + port = kzalloc(sizeof(*port), GFP_KERNEL); + if (!port) + return -ENOMEM; + + /* I2C setup */ + i2c_adap_np = of_parse_phandle(dev->of_node, "i2c-adapter", 0); + if (!i2c_adap_np) { + retval = dev_err_probe(dev, -ENODEV, "cannot parse i2c-adapter"); + goto err_port; + } + port->i2c_adap = of_find_i2c_adapter_by_node(i2c_adap_np); + of_node_put(i2c_adap_np); + + /* GPIO setup */ + port->gpios = gpiod_get_array(dev, "mikrobus", GPIOD_OUT_LOW); + if (IS_ERR(port->gpios)) { + retval = PTR_ERR(port->gpios); + dev_err(dev, "failed to get gpio array [%d]", retval); + goto err_port; + } + + /* SPI setup */ + spi_np = of_parse_phandle(dev->of_node, "spi-controller", 0); + if (!spi_np) { + retval = dev_err_probe(dev, -ENODEV, "cannot parse spi-controller"); + goto err_port; + } + port->spi_ctrl = of_find_spi_controller_by_node(spi_np); + of_node_put(spi_np); + if (!port->spi_ctrl) { + retval = dev_err_probe(dev, -ENODEV, "cannot find spi controller"); + goto err_port; + } + retval = device_property_read_u32_array(dev, "spi-cs", port->chip_select, MIKROBUS_NUM_CS); + if (retval) { + dev_err(dev, "failed to get spi-cs [%d]", retval); + goto err_port; + } + + /* UART setup */ + uart_np = of_parse_phandle(dev->of_node, "uart", 0); + if (!uart_np) { + retval = dev_err_probe(dev, -ENODEV, "cannot parse uart"); + goto err_port; + } + port->ser_ctrl = of_find_serdev_controller_by_node(uart_np); + of_node_put(uart_np); + if (!port->ser_ctrl) { + retval = dev_err_probe(dev, -ENODEV, "cannot find uart controller"); + goto err_port; + } + + /* PWM setup */ + port->pwm = devm_pwm_get(dev, NULL); + if (!port->pwm) { + retval = dev_err_probe(dev, -ENODEV, "cannot find pwm controller"); + goto err_port; + } + + /* pinctrl setup */ + port->pinctrl = devm_pinctrl_get(dev); + if (IS_ERR(port->pinctrl)) { + retval = PTR_ERR(port->pinctrl); + dev_err(dev, "failed to get pinctrl [%d]", retval); + goto err_port; + } + port->dev.parent = dev; + port->dev.of_node = pdev->dev.of_node; + retval = mikrobus_port_probe_pinctrl_setup(port); + if (retval) { + dev_err(dev, "failed to setup pinctrl [%d]", retval); + goto err_port; + } + + retval = mikrobus_port_register(port); + if (retval) { + dev_err(dev, "port : can't register port [%d]", retval); + goto err_port; + } + + platform_set_drvdata(pdev, port); + + return 0; + +err_port: + kfree(port); + return retval; +} + +static int mikrobus_port_remove(struct platform_device *pdev) +{ + struct mikrobus_port *port = platform_get_drvdata(pdev); + + mikrobus_port_delete(port); + return 0; +} + +static const struct of_device_id mikrobus_port_of_match[] = { + { .compatible = "mikrobus-connector" }, + {}, +}; +MODULE_DEVICE_TABLE(of, mikrobus_port_of_match); + +static struct platform_driver mikrobus_port_driver = { + .probe = mikrobus_port_probe, + .remove = mikrobus_port_remove, + .driver = { + .name = "mikrobus", + .of_match_table = of_match_ptr(mikrobus_port_of_match), + }, +}; + +static int mikrobus_init(void) +{ + int retval; + + retval = bus_register(&mikrobus_bus_type); + if (retval) { + pr_err("bus_register failed (%d)\n", retval); + return retval; + } + + mikrobus_port_compat_class = class_compat_register("mikrobus-port"); + if (!mikrobus_port_compat_class) { + pr_err("class_compat register failed (%d)\n", retval); + retval = -ENOMEM; + goto class_err; + } + + retval = of_alias_get_highest_id("mikrobus"); + if (retval >= __mikrobus_first_dynamic_bus_num) + __mikrobus_first_dynamic_bus_num = retval + 1; + + is_registered = true; + retval = platform_driver_register(&mikrobus_port_driver); + if (retval) + pr_err("driver register failed [%d]\n", retval); + + return retval; + +class_err: + bus_unregister(&mikrobus_bus_type); + idr_destroy(&mikrobus_port_idr); + is_registered = false; + return retval; +} +subsys_initcall(mikrobus_init); + +static void mikrobus_exit(void) +{ + platform_driver_unregister(&mikrobus_port_driver); + bus_unregister(&mikrobus_bus_type); + class_compat_unregister(mikrobus_port_compat_class); + idr_destroy(&mikrobus_port_idr); +} +module_exit(mikrobus_exit); + +MODULE_AUTHOR("Vaishnav M A "); +MODULE_AUTHOR("Ayush Singh "); +MODULE_DESCRIPTION("mikroBUS main module"); +MODULE_LICENSE("GPL"); diff --git a/drivers/misc/mikrobus/mikrobus_core.h b/drivers/misc/mikrobus/mikrobus_core.h new file mode 100644 index 000000000000..8bd101828964 --- /dev/null +++ b/drivers/misc/mikrobus/mikrobus_core.h @@ -0,0 +1,201 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * mikroBUS Driver for instantiating add-on + * board devices with an identifier EEPROM + * + * Copyright 2020 Vaishnav M A, BeagleBoard.org Foundation. + */ + +#ifndef __MIKROBUS_H +#define __MIKROBUS_H + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define MIKROBUS_VERSION_MAJOR 0x00 +#define MIKROBUS_VERSION_MINOR 0x03 + +#define MIKROBUS_NAME_SIZE 40 +#define MIKROBUS_PINCTRL_NAME_SIZE 20 + +#define MIKROBUS_NUM_PINCTRL_STATE 4 +#define MIKROBUS_NUM_CS 2 + +#define MIKROBUS_PINCTRL_PWM 0 +#define MIKROBUS_PINCTRL_UART 1 +#define MIKROBUS_PINCTRL_I2C 2 +#define MIKROBUS_PINCTRL_SPI 3 + +#define MIKROBUS_PINCTRL_STATE_GPIO "gpio" + +#define MIKROBUS_EEPROM_EXIT_ID_CMD 0xD2 + +extern const struct bus_type mikrobus_bus_type; +extern const struct device_type mikrobus_port_type; +extern const char *MIKROBUS_PINCTRL_STR[]; + +enum mikrobus_property_type { + MIKROBUS_PROPERTY_TYPE_MIKROBUS = 0x00, + MIKROBUS_PROPERTY_TYPE_PROPERTY = 0x01, + MIKROBUS_PROPERTY_TYPE_GPIO = 0x02, + MIKROBUS_PROPERTY_TYPE_U8 = 0x03, + MIKROBUS_PROPERTY_TYPE_U16 = 0x04, + MIKROBUS_PROPERTY_TYPE_U32 = 0x05, + MIKROBUS_PROPERTY_TYPE_U64 = 0x06, + MIKROBUS_PROPERTY_TYPE_REGULATOR = 0x07, + MIKROBUS_PROPERTY_TYPE_CLOCK = 0x08, +}; + +enum mikrobus_pin { + MIKROBUS_PIN_PWM = 0x00, + MIKROBUS_PIN_INT = 0x01, + MIKROBUS_PIN_RX = 0x02, + MIKROBUS_PIN_TX = 0x03, + MIKROBUS_PIN_SCL = 0x04, + MIKROBUS_PIN_SDA = 0x05, + MIKROBUS_PIN_MOSI = 0x06, + MIKROBUS_PIN_MISO = 0x07, + MIKROBUS_PIN_SCK = 0x08, + MIKROBUS_PIN_CS = 0x09, + MIKROBUS_PIN_RST = 0x0A, + MIKROBUS_PIN_AN = 0x0B, + MIKROBUS_PORT_PIN_COUNT = 0x0C, +}; + +enum mikrobus_pin_state { + MIKROBUS_STATE_INPUT = 0x01, + MIKROBUS_STATE_OUTPUT_HIGH = 0x02, + MIKROBUS_STATE_OUTPUT_LOW = 0x03, + MIKROBUS_STATE_PWM = 0x04, + MIKROBUS_STATE_SPI = 0x05, + MIKROBUS_STATE_I2C = 0x06, + MIKROBUS_STATE_UART = 0x07, +}; + +/* + * board_device_info describes a single device on a mikrobus add-on + * board, an add-on board can present one or more device to the host + * + * @gpio_lookup: used to provide the GPIO lookup table for + * passing the named GPIOs to device drivers. + * @properties: used to provide the property_entry to pass named + * properties to device drivers, applicable only when driver uses + * device_property_read_* calls to fetch the properties. + * @num_gpio_resources: number of named gpio resources for the device, + * used mainly for gpiod_lookup_table memory allocation. + * @num_properties: number of custom properties for the device, + * used mainly for property_entry memory allocation. + * @protocol: used to know the type of the device and it should + * contain one of the values defined under 'enum greybus_class_type' + * under linux/greybus/greybus_manifest.h + * @reg: I2C address for the device, for devices on the SPI bus + * this field is the chip select address relative to the mikrobus + * port:0->device chip select connected to CS pin on mikroBUS port + * 1->device chip select connected to RST Pin on mikroBUS port + * @mode: SPI mode + * @max_speed_hz: SPI max speed(Hz) + * @drv_name: device_id to match with the driver + * @irq_type: type of IRQ trigger , match with defines in linux/interrupt.h + * @irq: irq number relative to the mikrobus port should contain one of the + * values defined under 'enum mikrobus_pin' + * @id: device id starting from 1 + */ +struct board_device_info { + struct gpiod_lookup_table *gpio_lookup; + struct property_entry *properties; + struct property_entry *regulators; + struct property_entry *clocks; + struct list_head links; + unsigned short num_gpio_resources; + unsigned short num_properties; + unsigned short num_regulators; + unsigned short num_clocks; + unsigned short protocol; + unsigned short reg; + unsigned int mode; + void *dev_client; + u32 max_speed_hz; + char *drv_name; + int irq_type; + int irq; + int id; +}; + +/* + * addon_board_info describes a mikrobus add-on device the add-on + * board, an add-on board can present one or more device to the host + * + * @manifest_descs: list of manifest descriptors + * @devices: list of devices on the board + * @pin_state: the state of each pin on the mikrobus port required + * for the add-on board should contain one of the values defined under + * 'enum mikrobus_pin_state' restrictions are as per mikrobus standard + * specifications. + * @name: add-on board name + */ +struct addon_board_info { + struct list_head manifest_descs; + struct list_head devices; + u8 pin_state[MIKROBUS_PORT_PIN_COUNT]; + char *name; +}; + +/* + * mikrobus_port describes the peripherals mapped to a + * mikrobus port. + * + * @eeprom_client: i2c_client corresponding to the eeprom + * on the add-on board. + * @board: pointer to the attached add-on board. + * @i2c_adap: I2C adapter attached to the mikrobus port. + * @spi_mstr: SPI master attached to the mikrobus port. + * @eeprom: nvmem_device for the eeprom on the add-on board. + * @pwm: pwm_device attached to the mikrobus port PWM pin. + * @pinctrl_selected: current pinctrl_selected state. + * @chip_select: chip select number mapped to the SPI + * CS pin on the mikrobus port and the RST pin on the mikrobus + * port + * @id: port id starting from 1 + */ +struct mikrobus_port { + struct addon_board_info *board; + struct nvmem_device *eeprom; + struct i2c_adapter *i2c_adap; + struct spi_controller *spi_ctrl; + struct w1_master *w1_master; + struct platform_device *w1_gpio; + struct serdev_controller *ser_ctrl; + struct gpio_descs *gpios; + struct pwm_device *pwm; + struct pinctrl *pinctrl; + struct module *owner; + struct device dev; + char name[MIKROBUS_NAME_SIZE]; + char *pinctrl_selected[MIKROBUS_NUM_PINCTRL_STATE]; + unsigned int chip_select[MIKROBUS_NUM_CS]; + int skip_scan; + int id; +}; + +#define to_mikrobus_port(d) container_of(d, struct mikrobus_port, dev) + +void mikrobus_board_unregister(struct mikrobus_port *port, struct addon_board_info *board); +int mikrobus_board_register(struct mikrobus_port *port, struct addon_board_info *board); +int mikrobus_port_register(struct mikrobus_port *port); +int mikrobus_port_pinctrl_select(struct mikrobus_port *port); +void mikrobus_port_delete(struct mikrobus_port *port); +int mikrobus_port_scan_eeprom(struct mikrobus_port *port); +struct mikrobus_port *mikrobus_find_port_by_w1_master(struct w1_master *master); +#endif /* __MIKROBUS_H */ diff --git a/drivers/misc/mikrobus/mikrobus_id.c b/drivers/misc/mikrobus/mikrobus_id.c new file mode 100644 index 000000000000..42a0a558785d --- /dev/null +++ b/drivers/misc/mikrobus/mikrobus_id.c @@ -0,0 +1,229 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * mikrobus_id.c - w1 mikroBUS ID family EEPROM driver + * + */ + +#include +#include +#include +#include +#include + +#include +#include +#include + +#include "mikrobus_core.h" + +#define W1_EEPROM_MIKROBUS_ID 0xCC +#define W1_MIKROBUS_ID_EEPROM_SIZE 0x0200 +#define W1_MIKROBUS_ID_EEPROM_PAGE_SIZE 32 +#define W1_MIKROBUS_ID_READ_EEPROM 0x69 +#define W1_MIKROBUS_ID_WRITE_EEPROM 0x96 +#define W1_MIKROBUS_ID_RELEASE_EEPROM 0xAA +#define W1_MIKROBUS_ID_EEPROM_READ_RETRIES 10 + +#define W1_MIKROBUS_EEPROM_MANIFEST_START_PAGE 1 + +static ssize_t mikrobus_manifest_store(struct device *device, struct device_attribute *attr, + const char *buf, size_t count) +{ + u8 write_request[] = { W1_MIKROBUS_ID_WRITE_EEPROM, + W1_MIKROBUS_EEPROM_MANIFEST_START_PAGE }; + u8 release_command = W1_MIKROBUS_ID_RELEASE_EEPROM; + struct w1_slave *sl = dev_to_w1_slave(device); + u16 crc, crc_read, pos = 0; + u8 status = 0; + int cnt; + + if (count > W1_MIKROBUS_ID_EEPROM_SIZE) + return -ENOMEM; + + mutex_lock(&sl->master->bus_mutex); + + pr_info("mikrobus_id: writing manifest size = %lu bytes", count); + while (pos < count) { + if (w1_reset_select_slave(sl)) + break; + + w1_write_block(sl->master, write_request, sizeof(write_request)); + crc = crc16(0, write_request, sizeof(write_request)) ^ 0xFFFF; + w1_read_block(sl->master, (u8 *)&crc_read, sizeof(crc_read)); + + if (crc != crc_read) + break; + + for (cnt = 0; cnt < W1_MIKROBUS_ID_EEPROM_PAGE_SIZE; cnt++) + w1_write_8(sl->master, (u8)buf[cnt]); + + crc = crc16(0, buf, W1_MIKROBUS_ID_EEPROM_PAGE_SIZE) ^ 0xFFFF; + usleep_range(1 * USEC_PER_MSEC, 2 * USEC_PER_MSEC); + w1_read_block(sl->master, (u8 *)&crc_read, sizeof(crc_read)); + + if (crc != crc_read) + break; + + w1_write_8(sl->master, release_command); + usleep_range(10 * USEC_PER_MSEC, 15 * USEC_PER_MSEC); + status = w1_read_8(sl->master); + w1_read_block(sl->master, (u8 *)&crc_read, sizeof(crc_read)); + crc = crc16(0, (u8 *)&release_command, sizeof(release_command)) ^ 0xFFFF; + + if (status != W1_MIKROBUS_ID_RELEASE_EEPROM) + break; + + if (crc != crc_read) + break; + + buf += W1_MIKROBUS_ID_EEPROM_PAGE_SIZE; + pos += W1_MIKROBUS_ID_EEPROM_PAGE_SIZE; + write_request[1]++; + } + + pr_info("mikrobus_id: manifest written bytes: %d", pos); + mutex_unlock(&sl->master->bus_mutex); + + return count > pos ? count : pos; +} +static DEVICE_ATTR_WO(mikrobus_manifest); + +static struct attribute *w1_mikrobus_attrs[] = { &dev_attr_mikrobus_manifest.attr, NULL }; + +ATTRIBUTE_GROUPS(w1_mikrobus); + +static int w1_mikrobus_id_readpage(struct w1_slave *sl, int pageaddr, char *buf) +{ + u8 crc_rdbuf[2]; + + if (w1_reset_select_slave(sl)) + return -1; + + w1_write_8(sl->master, W1_MIKROBUS_ID_READ_EEPROM); + w1_write_8(sl->master, pageaddr); + w1_read_block(sl->master, crc_rdbuf, 2); + w1_write_8(sl->master, W1_MIKROBUS_ID_RELEASE_EEPROM); + usleep_range(10 * USEC_PER_MSEC, 15 * USEC_PER_MSEC); + w1_read_block(sl->master, crc_rdbuf, 1); + w1_read_block(sl->master, buf, W1_MIKROBUS_ID_EEPROM_PAGE_SIZE); + w1_read_block(sl->master, crc_rdbuf, 2); + + return 0; +} + +static int w1_mikrobus_id_readbuf(struct w1_slave *sl, int count, int off, char *buf) +{ + int len = count - (count % W1_MIKROBUS_ID_EEPROM_PAGE_SIZE); + u8 pageaddr = off / W1_MIKROBUS_ID_EEPROM_PAGE_SIZE; + u8 temp_rdbuf[W1_MIKROBUS_ID_EEPROM_PAGE_SIZE]; + int iter, index, ret; + + while (len > 0) { + ret = w1_mikrobus_id_readpage( + sl, pageaddr, buf + (W1_MIKROBUS_ID_EEPROM_PAGE_SIZE * pageaddr - off)); + pageaddr += 1; + len -= W1_MIKROBUS_ID_EEPROM_PAGE_SIZE; + } + + if (count % W1_MIKROBUS_ID_EEPROM_PAGE_SIZE) { + ret = w1_mikrobus_id_readpage(sl, pageaddr, temp_rdbuf); + for (iter = W1_MIKROBUS_ID_EEPROM_PAGE_SIZE * pageaddr - off, index = 0; + iter < count; iter++, index++) + buf[iter] = temp_rdbuf[index]; + } + + return ret; +} + +static int w1_mikrobus_id_readblock(struct w1_slave *sl, int off, int count, char *buf) +{ + int tries = W1_MIKROBUS_ID_EEPROM_READ_RETRIES; + int ret = -EINVAL; + u8 *cmp; + + cmp = kzalloc(count, GFP_KERNEL); + if (!cmp) + return -ENOMEM; + + do { + w1_mikrobus_id_readbuf(sl, count, off, buf); + + w1_mikrobus_id_readbuf(sl, count, off, cmp); + if (!memcmp(cmp, buf, count)) { + ret = 0; + break; + } + } while (--tries); + + kfree(cmp); + return ret; +} + +static int w1_mikrobus_id_nvmem_read(void *priv, unsigned int off, void *buf, size_t count) +{ + struct w1_slave *sl = priv; + int ret; + + mutex_lock(&sl->master->bus_mutex); + ret = w1_mikrobus_id_readblock(sl, off, count, buf); + mutex_unlock(&sl->master->bus_mutex); + + return ret; +} + +static int w1_mikrobus_id_add_slave(struct w1_slave *sl) +{ + struct nvmem_device *nvmem; + struct mikrobus_port *port; + struct nvmem_config nvmem_cfg = { + .dev = &sl->dev, + .reg_read = w1_mikrobus_id_nvmem_read, + .type = NVMEM_TYPE_EEPROM, + .read_only = true, + .word_size = 1, + .stride = 1, + .size = W1_MIKROBUS_ID_EEPROM_SIZE, + .priv = sl, + }; + + port = mikrobus_find_port_by_w1_master(sl->master); + if (!port) + return -ENODEV; + + nvmem_cfg.name = port->name; + nvmem = devm_nvmem_register(&sl->dev, &nvmem_cfg); + if (IS_ERR(nvmem)) + return PTR_ERR(nvmem); + + port->eeprom = nvmem; + mikrobus_port_scan_eeprom(port); + + return 0; +} + +static const struct w1_family_ops w1_family_mikrobus_id_fops = { .add_slave = + w1_mikrobus_id_add_slave, + .groups = w1_mikrobus_groups }; + +static struct w1_family w1_family_mikrobus_id = { + .fid = W1_EEPROM_MIKROBUS_ID, + .fops = &w1_family_mikrobus_id_fops, +}; + +static int w1_mikrobusid_init(void) +{ + return w1_register_family(&w1_family_mikrobus_id); +} + +static void w1_mikrobusid_exit(void) +{ + w1_unregister_family(&w1_family_mikrobus_id); +} + +module_init(w1_mikrobusid_init); +module_exit(w1_mikrobusid_exit); + +MODULE_AUTHOR("Vaishnav M A "); +MODULE_DESCRIPTION("w1 family CC driver for mikroBUS ID EEPROM"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("w1-family-" __stringify(W1_EEPROM_MIKROBUS_ID)); diff --git a/drivers/misc/mikrobus/mikrobus_manifest.c b/drivers/misc/mikrobus/mikrobus_manifest.c new file mode 100644 index 000000000000..3121a1d01b8b --- /dev/null +++ b/drivers/misc/mikrobus/mikrobus_manifest.c @@ -0,0 +1,502 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * mikroBUS manifest parsing, an + * extension to Greybus Manifest Parsing + * under drivers/greybus/manifest.c + * + * Copyright 2014-2015 Google Inc. + * Copyright 2014-2015 Linaro Ltd. + */ + +#define pr_fmt(fmt) "mikrobus_manifest:%s: " fmt, __func__ + +#include +#include +#include +#include + +#include "mikrobus_manifest.h" + +struct manifest_desc { + struct list_head links; + size_t size; + void *data; + enum greybus_descriptor_type type; +}; + +static void manifest_descriptor_release_all(struct addon_board_info *board) +{ + struct manifest_desc *descriptor, *next; + + list_for_each_entry_safe(descriptor, next, &board->manifest_descs, links) { + list_del(&descriptor->links); + kfree(descriptor); + } +} + +static int board_descriptor_add(struct addon_board_info *board, struct greybus_descriptor *desc, + size_t size) +{ + struct greybus_descriptor_header *desc_header = &desc->header; + struct manifest_desc *descriptor; + size_t desc_size, expected_size; + + if (size < sizeof(*desc_header)) { + pr_err("short descriptor (%zu < %zu)", size, sizeof(*desc_header)); + return -EINVAL; + } + + desc_size = le16_to_cpu(desc_header->size); + if (desc_size > size) { + pr_err("incorrect descriptor size (%zu != %zu)", size, desc_size); + return -EINVAL; + } + + expected_size = sizeof(*desc_header); + switch (desc_header->type) { + case GREYBUS_TYPE_STRING: + expected_size += sizeof(struct greybus_descriptor_string); + expected_size += desc->string.length; + expected_size = ALIGN(expected_size, 4); + break; + case GREYBUS_TYPE_PROPERTY: + expected_size += sizeof(struct greybus_descriptor_property); + expected_size += desc->property.length; + expected_size = ALIGN(expected_size, 4); + break; + case GREYBUS_TYPE_DEVICE: + expected_size += sizeof(struct greybus_descriptor_device); + break; + case GREYBUS_TYPE_MIKROBUS: + expected_size += sizeof(struct greybus_descriptor_mikrobus); + break; + case GREYBUS_TYPE_INTERFACE: + expected_size += sizeof(struct greybus_descriptor_interface); + break; + case GREYBUS_TYPE_CPORT: + expected_size += sizeof(struct greybus_descriptor_cport); + break; + case GREYBUS_TYPE_BUNDLE: + expected_size += sizeof(struct greybus_descriptor_bundle); + break; + case GREYBUS_TYPE_INVALID: + default: + pr_err("invalid descriptor type %d", desc_header->type); + return -EINVAL; + } + + descriptor = kzalloc(sizeof(*descriptor), GFP_KERNEL); + if (!descriptor) + return -ENOMEM; + + descriptor->size = desc_size; + descriptor->data = (char *)desc + sizeof(*desc_header); + descriptor->type = desc_header->type; + list_add_tail(&descriptor->links, &board->manifest_descs); + + return desc_size; +} + +static char *mikrobus_string_get(struct addon_board_info *board, u8 string_id) +{ + struct greybus_descriptor_string *desc_string; + struct manifest_desc *descriptor; + bool found = false; + char *string; + + if (!string_id) + return NULL; + + list_for_each_entry(descriptor, &board->manifest_descs, links) { + if (descriptor->type != GREYBUS_TYPE_STRING) + continue; + + desc_string = descriptor->data; + if (desc_string->id == string_id) { + found = true; + break; + } + } + + if (!found) + return ERR_PTR(-ENOENT); + + string = kmemdup(&desc_string->string, desc_string->length + 1, GFP_KERNEL); + if (!string) + return ERR_PTR(-ENOMEM); + + string[desc_string->length] = '\0'; + + return string; +} + +static void mikrobus_state_get(struct addon_board_info *board) +{ + struct greybus_descriptor_mikrobus *mikrobus; + struct greybus_descriptor_interface *interface; + struct manifest_desc *descriptor; + bool found = false; + size_t i; + + list_for_each_entry(descriptor, &board->manifest_descs, links) { + if (descriptor->type == GREYBUS_TYPE_MIKROBUS) { + mikrobus = descriptor->data; + found = true; + break; + } + } + + if (!found) { + pr_err("mikrobus descriptor not found"); + return; + } + + for (i = 0; i < MIKROBUS_PORT_PIN_COUNT; i++) + board->pin_state[i] = mikrobus->pin_state[i]; + + found = false; + list_for_each_entry(descriptor, &board->manifest_descs, links) { + if (descriptor->type == GREYBUS_TYPE_INTERFACE) { + interface = descriptor->data; + found = true; + break; + } + } + + if (!found) { + pr_err("interface descriptor not found"); + return; + } + + board->name = mikrobus_string_get(board, interface->product_stringid); +} + +static struct property_entry *mikrobus_property_entry_get(struct addon_board_info *board, + u8 *prop_link, int num_properties) +{ + struct greybus_descriptor_property *desc_property; + struct manifest_desc *descriptor; + struct property_entry *properties; + bool found = false; + char *prop_name; + int i, retval; + u64 *val_u64; + u32 *val_u32; + u16 *val_u16; + u8 *val_u8; + + properties = kcalloc(num_properties, sizeof(*properties), GFP_KERNEL); + if (!properties) + return ERR_PTR(-ENOMEM); + + for (i = 0; i < num_properties; i++) { + list_for_each_entry(descriptor, &board->manifest_descs, links) { + if (descriptor->type != GREYBUS_TYPE_PROPERTY) + continue; + + desc_property = descriptor->data; + if (desc_property->id == prop_link[i]) { + found = true; + break; + } + } + + if (!found) { + retval = -ENOENT; + goto early_exit; + } + + prop_name = mikrobus_string_get(board, desc_property->propname_stringid); + if (!prop_name) { + retval = -ENOENT; + goto early_exit; + } + + switch (desc_property->type) { + case MIKROBUS_PROPERTY_TYPE_U8: + val_u8 = kmemdup(&desc_property->value, + (desc_property->length) * sizeof(u8), GFP_KERNEL); + if (desc_property->length == 1) + properties[i] = PROPERTY_ENTRY_U8(prop_name, *val_u8); + else + properties[i] = PROPERTY_ENTRY_U8_ARRAY_LEN( + prop_name, (void *)desc_property->value, + desc_property->length); + break; + case MIKROBUS_PROPERTY_TYPE_U16: + val_u16 = kmemdup(&desc_property->value, + (desc_property->length) * sizeof(u16), GFP_KERNEL); + if (desc_property->length == 1) + properties[i] = PROPERTY_ENTRY_U16(prop_name, *val_u16); + else + properties[i] = PROPERTY_ENTRY_U16_ARRAY_LEN( + prop_name, (void *)desc_property->value, + desc_property->length); + break; + case MIKROBUS_PROPERTY_TYPE_U32: + val_u32 = kmemdup(&desc_property->value, + (desc_property->length) * sizeof(u32), GFP_KERNEL); + if (desc_property->length == 1) + properties[i] = PROPERTY_ENTRY_U32(prop_name, *val_u32); + else + properties[i] = PROPERTY_ENTRY_U32_ARRAY_LEN( + prop_name, (void *)desc_property->value, + desc_property->length); + break; + case MIKROBUS_PROPERTY_TYPE_U64: + val_u64 = kmemdup(&desc_property->value, + (desc_property->length) * sizeof(u64), GFP_KERNEL); + if (desc_property->length == 1) + properties[i] = PROPERTY_ENTRY_U64(prop_name, *val_u64); + else + properties[i] = PROPERTY_ENTRY_U64_ARRAY_LEN( + prop_name, (void *)desc_property->value, + desc_property->length); + break; + default: + retval = -EINVAL; + goto early_exit; + } + } + return properties; + +early_exit: + kfree(properties); + return ERR_PTR(retval); +} + +static u8 *mikrobus_property_link_get(struct addon_board_info *board, u8 prop_id, + struct board_device_info *board_dev, u8 prop_type) +{ + struct greybus_descriptor_property *desc_property; + struct manifest_desc *descriptor; + bool found = false; + u8 *val_u8; + + if (!prop_id) + return NULL; + + list_for_each_entry(descriptor, &board->manifest_descs, links) { + if (descriptor->type != GREYBUS_TYPE_PROPERTY) + continue; + + desc_property = descriptor->data; + if (desc_property->id == prop_id && desc_property->type == prop_type) { + found = true; + break; + } + } + + if (!found) + return ERR_PTR(-ENOENT); + + val_u8 = kmemdup(&desc_property->value, desc_property->length, GFP_KERNEL); + if (prop_type == MIKROBUS_PROPERTY_TYPE_GPIO) + board_dev->num_gpio_resources = desc_property->length; + else if (prop_type == MIKROBUS_PROPERTY_TYPE_PROPERTY) + board_dev->num_properties = desc_property->length; + else if (prop_type == MIKROBUS_PROPERTY_TYPE_REGULATOR) + board_dev->num_regulators = desc_property->length; + else if (prop_type == MIKROBUS_PROPERTY_TYPE_CLOCK) + board_dev->num_clocks = desc_property->length; + + return val_u8; +} + +static int mikrobus_manifest_attach_device(struct addon_board_info *board, + struct greybus_descriptor_device *dev_desc) +{ + u8 *gpio_desc_link, *prop_link, *gpioval, *reg_link, *clock_link; + struct greybus_descriptor_property *desc_property; + struct board_device_info *board_dev; + struct gpiod_lookup_table *lookup; + struct manifest_desc *descriptor; + int retval, i; + + board_dev = kzalloc(sizeof(*board_dev), GFP_KERNEL); + if (!board_dev) + return -ENOMEM; + + board_dev->id = dev_desc->id; + board_dev->drv_name = mikrobus_string_get(board, dev_desc->driver_stringid); + if (!board_dev->drv_name) { + retval = -ENOENT; + goto err_free_board_dev; + } + + board_dev->protocol = dev_desc->protocol; + board_dev->reg = dev_desc->reg; + board_dev->irq = dev_desc->irq; + board_dev->irq_type = dev_desc->irq_type; + board_dev->max_speed_hz = le32_to_cpu(dev_desc->max_speed_hz); + board_dev->mode = dev_desc->mode; + pr_info("parsed device %d, driver=%s", board_dev->id, board_dev->drv_name); + + if (dev_desc->prop_link > 0) { + prop_link = mikrobus_property_link_get(board, dev_desc->prop_link, board_dev, + MIKROBUS_PROPERTY_TYPE_PROPERTY); + if (!prop_link) { + retval = -ENOENT; + goto err_free_board_dev; + } + + pr_info("device %d, number of properties=%d", board_dev->id, + board_dev->num_properties); + board_dev->properties = + mikrobus_property_entry_get(board, prop_link, board_dev->num_properties); + } + + if (dev_desc->gpio_link > 0) { + gpio_desc_link = mikrobus_property_link_get(board, dev_desc->gpio_link, board_dev, + MIKROBUS_PROPERTY_TYPE_GPIO); + if (!gpio_desc_link) { + retval = -ENOENT; + goto err_free_board_dev; + } + + pr_info("device %d, number of gpio resource=%d", board_dev->id, + board_dev->num_gpio_resources); + lookup = kzalloc(struct_size(lookup, table, board_dev->num_gpio_resources), + GFP_KERNEL); + if (!lookup) { + retval = -ENOMEM; + goto err_free_board_dev; + } + + for (i = 0; i < board_dev->num_gpio_resources; i++) { + list_for_each_entry(descriptor, &board->manifest_descs, links) { + if (descriptor->type != GREYBUS_TYPE_PROPERTY) + continue; + + desc_property = descriptor->data; + if (desc_property->id == gpio_desc_link[i]) { + gpioval = desc_property->value; + lookup->table[i].chip_hwnum = gpioval[0]; + lookup->table[i].flags = gpioval[1]; + lookup->table[i].con_id = mikrobus_string_get( + board, desc_property->propname_stringid); + break; + } + } + } + board_dev->gpio_lookup = lookup; + } + + if (dev_desc->reg_link > 0) { + reg_link = mikrobus_property_link_get(board, dev_desc->reg_link, board_dev, + MIKROBUS_PROPERTY_TYPE_REGULATOR); + if (!reg_link) { + retval = -ENOENT; + goto err_free_board_dev; + } + pr_info("device %d, number of regulators=%d", board_dev->id, + board_dev->num_regulators); + board_dev->regulators = + mikrobus_property_entry_get(board, reg_link, board_dev->num_regulators); + } + + if (dev_desc->clock_link > 0) { + clock_link = mikrobus_property_link_get(board, dev_desc->clock_link, board_dev, + MIKROBUS_PROPERTY_TYPE_CLOCK); + if (!clock_link) { + retval = -ENOENT; + goto err_free_board_dev; + } + pr_info("device %d, number of clocks=%d", board_dev->id, board_dev->num_clocks); + board_dev->clocks = + mikrobus_property_entry_get(board, clock_link, board_dev->num_clocks); + } + + list_add_tail(&board_dev->links, &board->devices); + return 0; + +err_free_board_dev: + kfree(board_dev); + return retval; +} + +static int mikrobus_manifest_parse_devices(struct addon_board_info *board) +{ + struct greybus_descriptor_device *desc_device; + struct manifest_desc *desc, *next; + int retval, devcount = 0; + + list_for_each_entry_safe(desc, next, &board->manifest_descs, links) { + if (desc->type != GREYBUS_TYPE_DEVICE) + continue; + + desc_device = desc->data; + retval = mikrobus_manifest_attach_device(board, desc_device); + devcount++; + } + + return devcount; +} + +int mikrobus_manifest_parse(struct addon_board_info *board, void *data, size_t size) +{ + struct greybus_manifest_header *header; + struct greybus_manifest *manifest; + struct greybus_descriptor *desc; + int dev_count, desc_size; + u16 manifest_size; + + if (size < sizeof(*header)) { + pr_err("short manifest (%zu < %zu)", size, sizeof(*header)); + return -EINVAL; + } + + manifest = data; + header = &manifest->header; + manifest_size = le16_to_cpu(header->size); + + if (manifest_size != size) { + pr_err("invalid manifest size(%zu < %u)", size, manifest_size); + return -EINVAL; + } + + if (header->version_major > MIKROBUS_VERSION_MAJOR) { + pr_err("manifest version too new (%u.%u > %u.%u)", header->version_major, + header->version_minor, MIKROBUS_VERSION_MAJOR, MIKROBUS_VERSION_MINOR); + return -EINVAL; + } + + desc = manifest->descriptors; + size -= sizeof(*header); + while (size) { + desc_size = board_descriptor_add(board, desc, size); + if (desc_size < 0) { + pr_err("invalid manifest descriptor, size: %u", desc_size); + return -EINVAL; + } + + desc = (void *)desc + desc_size; + size -= desc_size; + } + + mikrobus_state_get(board); + dev_count = mikrobus_manifest_parse_devices(board); + pr_info(" %s manifest parsed with %d devices", board->name, dev_count); + manifest_descriptor_release_all(board); + + return true; +} + +size_t mikrobus_manifest_header_validate(void *data, size_t size) +{ + struct greybus_manifest_header *header = data; + u16 manifest_size = le16_to_cpu(header->size); + + if (manifest_size < sizeof(*header)) { + pr_err("short manifest (%zu < %zu)", size, sizeof(*header)); + return -EINVAL; + } + + if (header->version_major > MIKROBUS_VERSION_MAJOR) { + pr_err("manifest version too new (%u.%u > %u.%u)", header->version_major, + header->version_minor, MIKROBUS_VERSION_MAJOR, MIKROBUS_VERSION_MINOR); + return -EINVAL; + } + + return manifest_size; +} diff --git a/drivers/misc/mikrobus/mikrobus_manifest.h b/drivers/misc/mikrobus/mikrobus_manifest.h new file mode 100644 index 000000000000..36b64b2093f5 --- /dev/null +++ b/drivers/misc/mikrobus/mikrobus_manifest.h @@ -0,0 +1,20 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * mikroBUS manifest definition + * extension to Greybus Manifest Definition + * + * Copyright 2014-2015 Google Inc. + * Copyright 2014-2015 Linaro Ltd. + * + * Released under the GPLv2 and BSD licenses. + */ + +#ifndef __MIKROBUS_MANIFEST_H +#define __MIKROBUS_MANIFEST_H + +#include "mikrobus_core.h" + +int mikrobus_manifest_parse(struct addon_board_info *info, void *data, size_t size); +size_t mikrobus_manifest_header_validate(void *data, size_t size); + +#endif /* __MIKROBUS_MANIFEST_H */