new file mode 100644
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/ti,qspi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI QSPI controller
+
+maintainers:
+ - Kousik Sanagavarapu <five231003@gmail.com>
+
+allOf:
+ - $ref: spi-controller.yaml#
+
+properties:
+ compatible:
+ enum:
+ - ti,am4372-qspi
+ - ti,dra7xxx-qspi
+
+ reg:
+ items:
+ - description: base registers
+ - description: mapped memory
+
+ reg-names:
+ items:
+ - const: qspi_base
+ - const: qspi_mmap
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: fck
+
+ interrupts:
+ maxItems: 1
+
+ num-cs:
+ maxItems: 1
+
+ ti,hwmods:
+ description:
+ Name of the hwmod associated to the QSPI. This is for legacy
+ platforms only.
+ $ref: /schemas/types.yaml#/definitions/string
+ deprecated: true
+
+ syscon-chipselects:
+ description:
+ Handle to system control region contains QSPI chipselect register
+ and offset of that register.
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ items:
+ items:
+ - description: phandle to system control register
+ - description: register offset
+
+ spi-max-frequency:
+ description: Maximum SPI clocking speed of the controller in Hz.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - clocks
+ - clock-names
+ - interrupts
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/dra7.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ qspi: spi@0 {
+ compatible = "ti,dra7xxx-qspi";
+ reg = <0x4b300000 0x100>,
+ <0x5c000000 0x4000000>;
+ reg-names = "qspi_base", "qspi_mmap";
+ syscon-chipselects = <&scm_conf 0x558>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&l4per2_clkctrl DRA7_L4PER2_QSPI_CLKCTRL 25>;
+ clock-names = "fck";
+ num-cs = <4>;
+ spi-max-frequency = <48000000>;
+ interrupts = <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>;
+ };
+...
deleted file mode 100644
@@ -1,53 +0,0 @@
-TI QSPI controller.
-
-Required properties:
-- compatible : should be "ti,dra7xxx-qspi" or "ti,am4372-qspi".
-- reg: Should contain QSPI registers location and length.
-- reg-names: Should contain the resource reg names.
- - qspi_base: Qspi configuration register Address space
- - qspi_mmap: Memory mapped Address space
- - (optional) qspi_ctrlmod: Control module Address space
-- interrupts: should contain the qspi interrupt number.
-- #address-cells, #size-cells : Must be present if the device has sub-nodes
-- ti,hwmods: Name of the hwmod associated to the QSPI
-
-Recommended properties:
-- spi-max-frequency: Definition as per
- Documentation/devicetree/bindings/spi/spi-bus.txt
-
-Optional properties:
-- syscon-chipselects: Handle to system control region contains QSPI
- chipselect register and offset of that register.
-
-NOTE: TI QSPI controller requires different pinmux and IODelay
-parameters for Mode-0 and Mode-3 operations, which needs to be set up by
-the bootloader (U-Boot). Default configuration only supports Mode-0
-operation. Hence, "spi-cpol" and "spi-cpha" DT properties cannot be
-specified in the slave nodes of TI QSPI controller without appropriate
-modification to bootloader.
-
-Example:
-
-For am4372:
-qspi: qspi@47900000 {
- compatible = "ti,am4372-qspi";
- reg = <0x47900000 0x100>, <0x30000000 0x4000000>;
- reg-names = "qspi_base", "qspi_mmap";
- #address-cells = <1>;
- #size-cells = <0>;
- spi-max-frequency = <25000000>;
- ti,hwmods = "qspi";
-};
-
-For dra7xx:
-qspi: qspi@4b300000 {
- compatible = "ti,dra7xxx-qspi";
- reg = <0x4b300000 0x100>,
- <0x5c000000 0x4000000>,
- reg-names = "qspi_base", "qspi_mmap";
- syscon-chipselects = <&scm_conf 0x558>;
- #address-cells = <1>;
- #size-cells = <0>;
- spi-max-frequency = <48000000>;
- ti,hwmods = "qspi";
-};
Convert txt binding of TI's qspi controller (found on their omap SoCs) to dtschema to allow for validation. The changes, w.r.t. the original txt binding, are: - Introduce "clocks" and "clock-names" which was never mentioned. - Reflect that "ti,hwmods" is deprecated and is not a "required" property anymore. - Introduce "num-cs" which allows for setting the number of chip selects. - Drop "qspi_ctrlmod". Signed-off-by: Kousik Sanagavarapu <five231003@gmail.com> --- .../devicetree/bindings/spi/ti,qspi.yaml | 94 +++++++++++++++++++ .../devicetree/bindings/spi/ti_qspi.txt | 53 ----------- 2 files changed, 94 insertions(+), 53 deletions(-) create mode 100644 Documentation/devicetree/bindings/spi/ti,qspi.yaml delete mode 100644 Documentation/devicetree/bindings/spi/ti_qspi.txt