diff mbox series

[v2,1/4] spi: xcomm: add gpiochip support

Message ID 20240705-dev-spi-xcomm-gpiochip-v2-1-b10842fc9636@analog.com (mailing list archive)
State Accepted
Commit 5211070c3309bb3679f4522c77b900f551db5739
Headers show
Series spi: xcomm: support GPO pin | expand

Commit Message

Nuno Sa via B4 Relay July 5, 2024, 3:12 p.m. UTC 
From: Michael Hennerich <michael.hennerich@analog.com>

The hardware can expose one pin as a GPO. Hence, register a simple
gpiochip to support it.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Co-developed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
---
 drivers/spi/spi-xcomm.c | 42 +++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 41 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/spi/spi-xcomm.c b/drivers/spi/spi-xcomm.c
index 63354dd3110fc..063ce75af6504 100644
--- a/drivers/spi/spi-xcomm.c
+++ b/drivers/spi/spi-xcomm.c
@@ -10,6 +10,7 @@ 
 #include <linux/module.h>
 #include <linux/delay.h>
 #include <linux/i2c.h>
+#include <linux/gpio/driver.h>
 #include <linux/spi/spi.h>
 #include <asm/unaligned.h>
 
@@ -26,12 +27,15 @@ 
 
 #define SPI_XCOMM_CMD_UPDATE_CONFIG	0x03
 #define SPI_XCOMM_CMD_WRITE		0x04
+#define SPI_XCOMM_CMD_GPIO_SET		0x05
 
 #define SPI_XCOMM_CLOCK 48000000
 
 struct spi_xcomm {
 	struct i2c_client *i2c;
 
+	struct gpio_chip gc;
+
 	uint16_t settings;
 	uint16_t chipselect;
 
@@ -40,6 +44,42 @@  struct spi_xcomm {
 	uint8_t buf[63];
 };
 
+static void spi_xcomm_gpio_set_value(struct gpio_chip *chip,
+				     unsigned int offset, int val)
+{
+	struct spi_xcomm *spi_xcomm = gpiochip_get_data(chip);
+	unsigned char buf[2];
+
+	buf[0] = SPI_XCOMM_CMD_GPIO_SET;
+	buf[1] = !!val;
+
+	i2c_master_send(spi_xcomm->i2c, buf, 2);
+}
+
+static int spi_xcomm_gpio_get_direction(struct gpio_chip *chip,
+					unsigned int offset)
+{
+	return GPIO_LINE_DIRECTION_OUT;
+}
+
+static int spi_xcomm_gpio_add(struct spi_xcomm *spi_xcomm)
+{
+	struct device *dev = &spi_xcomm->i2c->dev;
+
+	if (!IS_ENABLED(CONFIG_GPIOLIB))
+		return 0;
+
+	spi_xcomm->gc.get_direction = spi_xcomm_gpio_get_direction;
+	spi_xcomm->gc.set = spi_xcomm_gpio_set_value;
+	spi_xcomm->gc.can_sleep = 1;
+	spi_xcomm->gc.base = -1;
+	spi_xcomm->gc.ngpio = 1;
+	spi_xcomm->gc.label = spi_xcomm->i2c->name;
+	spi_xcomm->gc.owner = THIS_MODULE;
+
+	return devm_gpiochip_add_data(dev, &spi_xcomm->gc, spi_xcomm);
+}
+
 static int spi_xcomm_sync_config(struct spi_xcomm *spi_xcomm, unsigned int len)
 {
 	uint16_t settings;
@@ -227,7 +267,7 @@  static int spi_xcomm_probe(struct i2c_client *i2c)
 	if (ret < 0)
 		spi_controller_put(host);
 
-	return ret;
+	return spi_xcomm_gpio_add(spi_xcomm);
 }
 
 static const struct i2c_device_id spi_xcomm_ids[] = {