| Message ID | 20240828203721.2751904-19-quic_nkela@quicinc.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | arm64: qcom: Introduce SA8255p Ride platform | expand |
On Wed, 28 Aug 2024 13:37:17 -0700, Nikunj Kela wrote: > Add compatible representing spi support on SA8255p. > > Clocks and interconnects are being configured in firmware VM > on SA8255p platform, therefore making them optional. > > CC: Praveen Talari <quic_ptalari@quicinc.com> > Signed-off-by: Nikunj Kela <quic_nkela@quicinc.com> > --- > .../bindings/spi/qcom,spi-geni-qcom.yaml | 64 +++++++++++++++---- > 1 file changed, 53 insertions(+), 11 deletions(-) > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: ./Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.yaml:90:11: [error] string value is redundantly quoted with any quotes (quoted-strings) dtschema/dtc warnings/errors: doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240828203721.2751904-19-quic_nkela@quicinc.com The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
On Wed, Aug 28, 2024 at 01:37:17PM -0700, Nikunj Kela wrote: > Add compatible representing spi support on SA8255p. > > Clocks and interconnects are being configured in firmware VM > on SA8255p platform, therefore making them optional. > > CC: Praveen Talari <quic_ptalari@quicinc.com> > Signed-off-by: Nikunj Kela <quic_nkela@quicinc.com> > --- > .../bindings/spi/qcom,spi-geni-qcom.yaml | 64 +++++++++++++++---- > 1 file changed, 53 insertions(+), 11 deletions(-) > > diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.yaml b/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.yaml > index 2e20ca313ec1..74ea7c4f2451 100644 > --- a/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.yaml > +++ b/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.yaml > @@ -25,10 +25,41 @@ description: > > allOf: > - $ref: /schemas/spi/spi-controller.yaml# > + - if: > + properties: > + compatible: > + contains: > + const: qcom,sa8255p-geni-spi > + then: > + required: > + - power-domains > + - power-domain-names blank line > + properties: > + power-domains: > + minItems: 2 > + maxItems: 2 Drop maxItems as 2 is already the max (with my change below). Add blank line here. > + else: > + required: > + - clocks > + - clock-names blank line > + properties: > + power-domains: > + maxItems: 1 blank line > + interconnects: > + minItems: 2 > + maxItems: 3 blank line > + interconnect-names: > + minItems: 2 > + items: > + - const: qup-core > + - const: qup-config > + - const: qup-memory > > properties: > compatible: > - const: qcom,geni-spi > + enum: > + - qcom,geni-spi > + - qcom,sa8255p-geni-spi > > clocks: > maxItems: 1 > @@ -45,15 +76,10 @@ properties: > - const: rx > > interconnects: > - minItems: 2 > - maxItems: 3 > + description: phandles of interconnect bw provider > > interconnect-names: > - minItems: 2 > - items: > - - const: qup-core > - - const: qup-config > - - const: qup-memory > + description: names of interconnects No, keep all properties defined at the top-level and then add constraints in if/then schemas. > > interrupts: > maxItems: 1 > @@ -61,15 +87,18 @@ properties: > operating-points-v2: true > > power-domains: > - maxItems: 1 > + $ref: "/schemas/power/power-domain.yaml#/properties/power-domains" Do you see an example of this anywhere else? No. You need: minItems: 1 maxItems: 2 > + > + power-domain-names: > + items: > + - const: power > + - const: perf > > reg: > maxItems: 1 > > required: > - compatible > - - clocks > - - clock-names > - interrupts > - reg > > @@ -116,3 +145,16 @@ examples: > #address-cells = <1>; > #size-cells = <0>; > }; > + > + - | > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + > + spi@888000 { > + compatible = "qcom,sa8255p-geni-spi"; > + reg = <0x888000 0x4000>; > + interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + power-domains = <&scmi10_pd 16>, <&scmi10_dvfs 16>; > + power-domain-names = "power", "perf"; > + }; > -- > 2.34.1 >
On 8/28/2024 8:06 PM, Rob Herring wrote: > On Wed, Aug 28, 2024 at 01:37:17PM -0700, Nikunj Kela wrote: >> Add compatible representing spi support on SA8255p. >> >> Clocks and interconnects are being configured in firmware VM >> on SA8255p platform, therefore making them optional. >> >> CC: Praveen Talari <quic_ptalari@quicinc.com> >> Signed-off-by: Nikunj Kela <quic_nkela@quicinc.com> >> --- >> .../bindings/spi/qcom,spi-geni-qcom.yaml | 64 +++++++++++++++---- >> 1 file changed, 53 insertions(+), 11 deletions(-) >> >> diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.yaml b/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.yaml >> index 2e20ca313ec1..74ea7c4f2451 100644 >> --- a/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.yaml >> +++ b/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.yaml >> @@ -25,10 +25,41 @@ description: >> >> allOf: >> - $ref: /schemas/spi/spi-controller.yaml# >> + - if: >> + properties: >> + compatible: >> + contains: >> + const: qcom,sa8255p-geni-spi >> + then: >> + required: >> + - power-domains >> + - power-domain-names > blank line > >> + properties: >> + power-domains: >> + minItems: 2 >> + maxItems: 2 > Drop maxItems as 2 is already the max (with my change below). > > Add blank line here. > >> + else: >> + required: >> + - clocks >> + - clock-names > blank line > >> + properties: >> + power-domains: >> + maxItems: 1 > blank line > >> + interconnects: >> + minItems: 2 >> + maxItems: 3 > blank line > >> + interconnect-names: >> + minItems: 2 >> + items: >> + - const: qup-core >> + - const: qup-config >> + - const: qup-memory >> >> properties: >> compatible: >> - const: qcom,geni-spi >> + enum: >> + - qcom,geni-spi >> + - qcom,sa8255p-geni-spi >> >> clocks: >> maxItems: 1 >> @@ -45,15 +76,10 @@ properties: >> - const: rx >> >> interconnects: >> - minItems: 2 >> - maxItems: 3 >> + description: phandles of interconnect bw provider >> >> interconnect-names: >> - minItems: 2 >> - items: >> - - const: qup-core >> - - const: qup-config >> - - const: qup-memory >> + description: names of interconnects > No, keep all properties defined at the top-level and then add > constraints in if/then schemas. > >> >> interrupts: >> maxItems: 1 >> @@ -61,15 +87,18 @@ properties: >> operating-points-v2: true >> >> power-domains: >> - maxItems: 1 >> + $ref: "/schemas/power/power-domain.yaml#/properties/power-domains" > Do you see an example of this anywhere else? No. You need: > > minItems: 1 > maxItems: 2 Thanks Rob for reviewing the patch. Will take care of your comments in next version. >> + >> + power-domain-names: >> + items: >> + - const: power >> + - const: perf >> >> reg: >> maxItems: 1 >> >> required: >> - compatible >> - - clocks >> - - clock-names >> - interrupts >> - reg >> >> @@ -116,3 +145,16 @@ examples: >> #address-cells = <1>; >> #size-cells = <0>; >> }; >> + >> + - | >> + #include <dt-bindings/interrupt-controller/arm-gic.h> >> + >> + spi@888000 { >> + compatible = "qcom,sa8255p-geni-spi"; >> + reg = <0x888000 0x4000>; >> + interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + power-domains = <&scmi10_pd 16>, <&scmi10_dvfs 16>; >> + power-domain-names = "power", "perf"; >> + }; >> -- >> 2.34.1 >>
diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.yaml b/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.yaml index 2e20ca313ec1..74ea7c4f2451 100644 --- a/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.yaml +++ b/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.yaml @@ -25,10 +25,41 @@ description: allOf: - $ref: /schemas/spi/spi-controller.yaml# + - if: + properties: + compatible: + contains: + const: qcom,sa8255p-geni-spi + then: + required: + - power-domains + - power-domain-names + properties: + power-domains: + minItems: 2 + maxItems: 2 + else: + required: + - clocks + - clock-names + properties: + power-domains: + maxItems: 1 + interconnects: + minItems: 2 + maxItems: 3 + interconnect-names: + minItems: 2 + items: + - const: qup-core + - const: qup-config + - const: qup-memory properties: compatible: - const: qcom,geni-spi + enum: + - qcom,geni-spi + - qcom,sa8255p-geni-spi clocks: maxItems: 1 @@ -45,15 +76,10 @@ properties: - const: rx interconnects: - minItems: 2 - maxItems: 3 + description: phandles of interconnect bw provider interconnect-names: - minItems: 2 - items: - - const: qup-core - - const: qup-config - - const: qup-memory + description: names of interconnects interrupts: maxItems: 1 @@ -61,15 +87,18 @@ properties: operating-points-v2: true power-domains: - maxItems: 1 + $ref: "/schemas/power/power-domain.yaml#/properties/power-domains" + + power-domain-names: + items: + - const: power + - const: perf reg: maxItems: 1 required: - compatible - - clocks - - clock-names - interrupts - reg @@ -116,3 +145,16 @@ examples: #address-cells = <1>; #size-cells = <0>; }; + + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + spi@888000 { + compatible = "qcom,sa8255p-geni-spi"; + reg = <0x888000 0x4000>; + interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&scmi10_pd 16>, <&scmi10_dvfs 16>; + power-domain-names = "power", "perf"; + };
Add compatible representing spi support on SA8255p. Clocks and interconnects are being configured in firmware VM on SA8255p platform, therefore making them optional. CC: Praveen Talari <quic_ptalari@quicinc.com> Signed-off-by: Nikunj Kela <quic_nkela@quicinc.com> --- .../bindings/spi/qcom,spi-geni-qcom.yaml | 64 +++++++++++++++---- 1 file changed, 53 insertions(+), 11 deletions(-)