diff mbox series

[v3,3/3] spi: airoha: add SPI-NAND Flash controller driver

Message ID 497dc9dad823fcd1403ed62ba164dd7d70f31f90.1713866770.git.lorenzo@kernel.org (mailing list archive)
State Superseded
Headers show
Series Add add SPI-NAND Flash controller driver for EN7581 | expand

Commit Message

Lorenzo Bianconi April 23, 2024, 10:16 a.m. UTC
Introduce support for SPI-NAND driver of the Airoha NAND Flash Interface
found on Airoha ARM SoCs.

Tested-by: Rajeev Kumar <Rajeev.Kumar@airoha.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
---
 MAINTAINERS                   |    9 +
 drivers/spi/Kconfig           |   10 +
 drivers/spi/Makefile          |    1 +
 drivers/spi/spi-airoha-snfi.c | 1156 +++++++++++++++++++++++++++++++++
 4 files changed, 1176 insertions(+)
 create mode 100644 drivers/spi/spi-airoha-snfi.c

Comments

AngeloGioacchino Del Regno April 23, 2024, 10:44 a.m. UTC | #1
Il 23/04/24 12:16, Lorenzo Bianconi ha scritto:
> Introduce support for SPI-NAND driver of the Airoha NAND Flash Interface
> found on Airoha ARM SoCs.
> 
> Tested-by: Rajeev Kumar <Rajeev.Kumar@airoha.com>
> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
> ---
>   MAINTAINERS                   |    9 +
>   drivers/spi/Kconfig           |   10 +
>   drivers/spi/Makefile          |    1 +
>   drivers/spi/spi-airoha-snfi.c | 1156 +++++++++++++++++++++++++++++++++
>   4 files changed, 1176 insertions(+)
>   create mode 100644 drivers/spi/spi-airoha-snfi.c
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index aa3b947fb080..ce9fac46f741 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -653,6 +653,15 @@ S:	Supported
>   F:	fs/aio.c
>   F:	include/linux/*aio*.h
>   
> +AIROHA SPI SNFI DRIVER
> +M:	Lorenzo Bianconi <lorenzo@kernel.org>
> +M:	Ray Liu <ray.liu@airoha.com>
> +L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
> +L:	linux-spi@vger.kernel.org
> +S:	Maintained
> +F:	Documentation/devicetree/bindings/spi/airoha,en7581-snand.yaml
> +F:	drivers/spi/spi-airoha.c
> +
>   AIRSPY MEDIA DRIVER
>   L:	linux-media@vger.kernel.org
>   S:	Orphan
> diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
> index bc7021da2fe9..6fa91775f334 100644
> --- a/drivers/spi/Kconfig
> +++ b/drivers/spi/Kconfig
> @@ -57,6 +57,16 @@ config SPI_MEM
>   
>   comment "SPI Master Controller Drivers"
>   
> +config SPI_AIROHA_SNFI
> +	tristate "Airoha SPI NAND Flash Interface"
> +	depends on ARCH_AIROHA || COMPILE_TEST
> +	depends on SPI_MASTER
> +	select REGMAP_MMIO
> +	help
> +	  This enables support for SPI-NAND mode on the Airoha NAND
> +	  Flash Interface found on Airoha ARM SoCs. This controller
> +	  is implemented as a SPI-MEM controller.
> +
>   config SPI_ALTERA
>   	tristate "Altera SPI Controller platform driver"
>   	select SPI_ALTERA_CORE
> diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
> index 4ff8d725ba5e..e694254dec04 100644
> --- a/drivers/spi/Makefile
> +++ b/drivers/spi/Makefile
> @@ -14,6 +14,7 @@ obj-$(CONFIG_SPI_SPIDEV)		+= spidev.o
>   obj-$(CONFIG_SPI_LOOPBACK_TEST)		+= spi-loopback-test.o
>   
>   # SPI master controller drivers (bus)
> +obj-$(CONFIG_SPI_AIROHA_SNFI)		+= spi-airoha-snfi.o
>   obj-$(CONFIG_SPI_ALTERA)		+= spi-altera-platform.o
>   obj-$(CONFIG_SPI_ALTERA_CORE)		+= spi-altera-core.o
>   obj-$(CONFIG_SPI_ALTERA_DFL)		+= spi-altera-dfl.o
> diff --git a/drivers/spi/spi-airoha-snfi.c b/drivers/spi/spi-airoha-snfi.c
> new file mode 100644
> index 000000000000..eacb32d6e28e
> --- /dev/null
> +++ b/drivers/spi/spi-airoha-snfi.c
> @@ -0,0 +1,1156 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2024 AIROHA Inc
> + * Author: Lorenzo Bianconi <lorenzo@kernel.org>
> + * Author: Ray Liu <ray.liu@airoha.com>
> + */
> +

..snip...

> +static ssize_t airoha_snand_dirmap_read(struct spi_mem_dirmap_desc *desc,
> +					u64 offs, size_t len, void *buf)
> +{
> +	struct spi_device *spi = desc->mem->spi;
> +	struct airoha_snand_dev *as_dev = spi_get_ctldata(spi);
> +	struct spi_mem_op *op = &desc->info.op_tmpl;
> +	struct airoha_snand_ctrl *as_ctrl;
> +	u32 val, rd_mode;
> +	int err;
> +
> +	if (!as_dev->data_need_update)
> +		return len;
> +
> +	as_dev->data_need_update = false;
> +
> +	switch (op->cmd.opcode) {
> +	case SPI_NAND_OP_READ_FROM_CACHE_DUAL:
> +		rd_mode = 1;
> +		break;
> +	case SPI_NAND_OP_READ_FROM_CACHE_QUAD:
> +		rd_mode = 2;
> +		break;
> +	default:
> +		rd_mode = 0;
> +		break;
> +	}
> +
> +	as_ctrl = spi_controller_get_devdata(spi->controller);
> +	err = airoha_snand_set_mode(as_ctrl, SPI_MODE_DMA);
> +	if (err < 0)
> +		return err;
> +
> +	err = airoha_snand_nfi_config(as_ctrl);
> +	if (err)
> +		return err;
> +
> +	dma_sync_single_for_device(as_ctrl->dev, as_dev->dma_addr,
> +				   as_dev->buf_len, DMA_BIDIRECTIONAL);
> +	mb();

Are you sure you need this memory barrier here?

P.S.: Just in case... any other write or read will anyway add a barrier ;-)

> +
> +	/* set dma addr */
> +	err = regmap_write(as_ctrl->regmap_nfi, REG_SPI_NFI_STRADDR,
> +			   as_dev->dma_addr);
> +	if (err)
> +		return err;
> +

..snip..

> +
> +static ssize_t airoha_snand_dirmap_write(struct spi_mem_dirmap_desc *desc,
> +					 u64 offs, size_t len, const void *buf)
> +{
> +	struct spi_device *spi = desc->mem->spi;
> +	struct airoha_snand_dev *as_dev = spi_get_ctldata(spi);
> +	struct spi_mem_op *op = &desc->info.op_tmpl;
> +	struct airoha_snand_ctrl *as_ctrl;
> +	u32 wr_mode, val;
> +	int err;
> +
> +	as_ctrl = spi_controller_get_devdata(spi->controller);
> +	err = airoha_snand_set_mode(as_ctrl, SPI_MODE_MANUAL);
> +	if (err < 0)
> +		return err;
> +
> +	dma_sync_single_for_cpu(as_ctrl->dev, as_dev->dma_addr,
> +				as_dev->buf_len, DMA_BIDIRECTIONAL);
> +	memcpy(as_dev->txrx_buf + offs, buf, len);
> +	dma_sync_single_for_device(as_ctrl->dev, as_dev->dma_addr,
> +				   as_dev->buf_len, DMA_BIDIRECTIONAL);
> +	mb();
> +
> +	err = airoha_snand_set_mode(as_ctrl, SPI_MODE_DMA);
> +	if (err < 0)
> +		return err;
> +
> +	err = airoha_snand_nfi_config(as_ctrl);
> +	if (err)
> +		return err;
> +
> +	if (op->cmd.opcode == SPI_NAND_OP_PROGRAM_LOAD_QUAD ||
> +	    op->cmd.opcode == SPI_NAND_OP_PROGRAM_LOAD_RAMDON_QUAD)
> +		wr_mode = 2;

I'm mostly sure that this '2' is supposed to be BIT(1) instead

> +	else
> +		wr_mode = 0;
> +
> +	err = regmap_write(as_ctrl->regmap_nfi, REG_SPI_NFI_STRADDR,
> +			   as_dev->dma_addr);
> +	if (err)
> +		return err;
> +
> +	val = as_ctrl->nfi_cfg.sec_size * as_ctrl->nfi_cfg.sec_num;
> +	val = FIELD_PREP(SPI_NFI_PROG_LOAD_BYTE_NUM, val);

val = FIELD_PREP(SPI_NFI_PROG_LOAD_BYTE_NUM,
                  as_ctrl->nfi_cfg.sec_size * as_ctrl->nfi_cfg.sec_num);

Being this 100 cols eventually, you wouldn't even need two lines - but
if you don't want to go 100, it's still more readable (imo) like this,
even if in two lines.

> +	err = regmap_update_bits(as_ctrl->regmap_nfi,
> +				 REG_SPI_NFI_SNF_MISC_CTL2,
> +				 SPI_NFI_PROG_LOAD_BYTE_NUM, val);
> +	if (err)
> +		return err;
> +
> +	err = regmap_write(as_ctrl->regmap_nfi, REG_SPI_NFI_PG_CTL1,
> +			   FIELD_PREP(SPI_NFI_PG_LOAD_CMD,
> +				      op->cmd.opcode));
> +	if (err)
> +		return err;
> +
> +	err = regmap_write(as_ctrl->regmap_nfi, REG_SPI_NFI_SNF_MISC_CTL,
> +			   FIELD_PREP(SPI_NFI_DATA_READ_WR_MODE, wr_mode));
> +	if (err)
> +		return err;
> +

..snip..

> +
> +#define SPI_NAND_CACHE_SIZE	(4096 + 256)

#include <linux/sizes.h>      <--- at the beginning

#define SPI_NAND_CACHE_SIZE (SZ_4K + SZ_256)

...there are macros for that, might as well use them, right? :-)

> +
> +static int airoha_snand_setup(struct spi_device *spi)
> +{
> +	struct airoha_snand_dev *as_dev = spi_get_ctldata(spi);
> +	struct airoha_snand_ctrl *as_ctrl;
> +
> +	as_dev = kzalloc(sizeof(*as_dev), GFP_KERNEL);
> +	if (!as_dev)
> +		return -ENOMEM;
> +
> +	spi_set_ctldata(spi, as_dev);
> +	as_dev->data_need_update = true;
> +
> +	/* prepare device buffer */
> +	as_dev->buf_len = SPI_NAND_CACHE_SIZE;
> +	as_dev->txrx_buf = kzalloc(as_dev->buf_len, GFP_KERNEL);
> +	if (!as_dev->txrx_buf)
> +		goto error_dev_free;
> +
> +	as_ctrl = spi_controller_get_devdata(spi->controller);
> +	as_dev->dma_addr = dma_map_single(as_ctrl->dev, as_dev->txrx_buf,
> +					  as_dev->buf_len, DMA_BIDIRECTIONAL);
> +	if (dma_mapping_error(as_ctrl->dev, as_dev->dma_addr))
> +		goto error_buf_free;
> +
> +	return 0;
> +
> +error_buf_free:
> +	kfree(as_dev->txrx_buf);
> +error_dev_free:
> +	kfree(as_dev);
> +
> +	return -EINVAL;
> +}
> +
> +static void airoha_snand_cleanup(struct spi_device *spi)
> +{
> +	struct airoha_snand_dev *as_dev = spi_get_ctldata(spi);
> +	struct airoha_snand_ctrl *as_ctrl;
> +
> +	as_ctrl = spi_controller_get_devdata(spi->controller);
> +	dma_unmap_single(as_ctrl->dev, as_dev->dma_addr,
> +			 as_dev->buf_len, DMA_BIDIRECTIONAL);
> +	kfree(as_dev->txrx_buf);
> +
> +	spi_set_ctldata(spi, NULL);
> +}
> +
> +static int airoha_snand_nfi_setup(struct airoha_snand_ctrl *as_ctrl)
> +{
> +	u32 val, sec_size, sec_num;
> +	int err;
> +
> +	err = regmap_read(as_ctrl->regmap_nfi, REG_SPI_NFI_CON, &val);
> +	if (err)
> +		return err;
> +
> +	sec_num = FIELD_GET(SPI_NFI_SEC_NUM, val);
> +
> +	err = regmap_read(as_ctrl->regmap_nfi,
> +			  REG_SPI_NFI_SECCUS_SIZE, &val);
> +	if (err)
> +		return err;
> +
> +	sec_size = FIELD_GET(SPI_NFI_CUS_SEC_SIZE, val);
> +
> +	/* init default value */
> +	as_ctrl->nfi_cfg.sec_size = sec_size;
> +	as_ctrl->nfi_cfg.sec_num = sec_num;
> +	as_ctrl->nfi_cfg.page_size = rounddown(sec_size * sec_num, 1024);
> +	as_ctrl->nfi_cfg.spare_size = 16;
> +
> +	err = airoha_snand_nfi_init(as_ctrl);
> +	if (err)
> +		return err;
> +
> +	return airoha_snand_nfi_config(as_ctrl);
> +}
> +
> +static const struct regmap_config spi_ctrl_regmap_config = {
> +	.name		= "ctrl",
> +	.reg_bits	= 32,
> +	.val_bits	= 32,
> +	.reg_stride	= 4,
> +	.max_register	= REG_SPI_CTRL_NFI2SPI_EN,
> +};
> +
> +static const struct regmap_config spi_nfi_regmap_config = {
> +	.name		= "nfi",
> +	.reg_bits	= 32,
> +	.val_bits	= 32,
> +	.reg_stride	= 4,
> +	.max_register	= REG_SPI_NFI_SNF_NFI_CNFG,
> +};
> +
> +static const struct of_device_id airoha_snand_ids[] = {
> +	{ .compatible	= "airoha,en7581-snand" },
> +	{ }

{ /* sentinel */ }

...please!

> +};
> +MODULE_DEVICE_TABLE(of, airoha_snand_ids);
> +

Cheers,
Angelo
Lorenzo Bianconi April 23, 2024, 11:02 a.m. UTC | #2
> Il 23/04/24 12:16, Lorenzo Bianconi ha scritto:

[...]
> > +
> > +	err = airoha_snand_nfi_config(as_ctrl);
> > +	if (err)
> > +		return err;
> > +
> > +	dma_sync_single_for_device(as_ctrl->dev, as_dev->dma_addr,
> > +				   as_dev->buf_len, DMA_BIDIRECTIONAL);
> > +	mb();
> 
> Are you sure you need this memory barrier here?
> 
> P.S.: Just in case... any other write or read will anyway add a barrier ;-)
> 

ack, I will fix it in v4.

> > +
> > +	/* set dma addr */
> > +	err = regmap_write(as_ctrl->regmap_nfi, REG_SPI_NFI_STRADDR,
> > +			   as_dev->dma_addr);
> > +	if (err)
> > +		return err;
> > +
> 
> ..snip..
> 
> > +
> > +static ssize_t airoha_snand_dirmap_write(struct spi_mem_dirmap_desc *desc,
> > +					 u64 offs, size_t len, const void *buf)
> > +{
> > +	struct spi_device *spi = desc->mem->spi;
> > +	struct airoha_snand_dev *as_dev = spi_get_ctldata(spi);
> > +	struct spi_mem_op *op = &desc->info.op_tmpl;
> > +	struct airoha_snand_ctrl *as_ctrl;
> > +	u32 wr_mode, val;
> > +	int err;
> > +
> > +	as_ctrl = spi_controller_get_devdata(spi->controller);
> > +	err = airoha_snand_set_mode(as_ctrl, SPI_MODE_MANUAL);
> > +	if (err < 0)
> > +		return err;
> > +
> > +	dma_sync_single_for_cpu(as_ctrl->dev, as_dev->dma_addr,
> > +				as_dev->buf_len, DMA_BIDIRECTIONAL);
> > +	memcpy(as_dev->txrx_buf + offs, buf, len);
> > +	dma_sync_single_for_device(as_ctrl->dev, as_dev->dma_addr,
> > +				   as_dev->buf_len, DMA_BIDIRECTIONAL);
> > +	mb();
> > +
> > +	err = airoha_snand_set_mode(as_ctrl, SPI_MODE_DMA);
> > +	if (err < 0)
> > +		return err;
> > +
> > +	err = airoha_snand_nfi_config(as_ctrl);
> > +	if (err)
> > +		return err;
> > +
> > +	if (op->cmd.opcode == SPI_NAND_OP_PROGRAM_LOAD_QUAD ||
> > +	    op->cmd.opcode == SPI_NAND_OP_PROGRAM_LOAD_RAMDON_QUAD)
> > +		wr_mode = 2;
> 
> I'm mostly sure that this '2' is supposed to be BIT(1) instead

ack, I will fix it in v4.

> 
> > +	else
> > +		wr_mode = 0;
> > +
> > +	err = regmap_write(as_ctrl->regmap_nfi, REG_SPI_NFI_STRADDR,
> > +			   as_dev->dma_addr);
> > +	if (err)
> > +		return err;
> > +
> > +	val = as_ctrl->nfi_cfg.sec_size * as_ctrl->nfi_cfg.sec_num;
> > +	val = FIELD_PREP(SPI_NFI_PROG_LOAD_BYTE_NUM, val);
> 
> val = FIELD_PREP(SPI_NFI_PROG_LOAD_BYTE_NUM,
>                  as_ctrl->nfi_cfg.sec_size * as_ctrl->nfi_cfg.sec_num);
> 
> Being this 100 cols eventually, you wouldn't even need two lines - but
> if you don't want to go 100, it's still more readable (imo) like this,
> even if in two lines.

I prefer to be below 79 columns, so I will go for the 2 lines :)
I will fix it in v4.

> 
> > +	err = regmap_update_bits(as_ctrl->regmap_nfi,
> > +				 REG_SPI_NFI_SNF_MISC_CTL2,
> > +				 SPI_NFI_PROG_LOAD_BYTE_NUM, val);
> > +	if (err)
> > +		return err;
> > +
> > +	err = regmap_write(as_ctrl->regmap_nfi, REG_SPI_NFI_PG_CTL1,
> > +			   FIELD_PREP(SPI_NFI_PG_LOAD_CMD,
> > +				      op->cmd.opcode));
> > +	if (err)
> > +		return err;
> > +
> > +	err = regmap_write(as_ctrl->regmap_nfi, REG_SPI_NFI_SNF_MISC_CTL,
> > +			   FIELD_PREP(SPI_NFI_DATA_READ_WR_MODE, wr_mode));
> > +	if (err)
> > +		return err;
> > +
> 
> ..snip..
> 
> > +
> > +#define SPI_NAND_CACHE_SIZE	(4096 + 256)
> 
> #include <linux/sizes.h>      <--- at the beginning
> 
> #define SPI_NAND_CACHE_SIZE (SZ_4K + SZ_256)
> 
> ...there are macros for that, might as well use them, right? :-)

ack, I will fix it in v4.
> 
> > +
> > +static int airoha_snand_setup(struct spi_device *spi)
> > +{
> > +	struct airoha_snand_dev *as_dev = spi_get_ctldata(spi);
> > +	struct airoha_snand_ctrl *as_ctrl;
> > +
> > +	as_dev = kzalloc(sizeof(*as_dev), GFP_KERNEL);
> > +	if (!as_dev)
> > +		return -ENOMEM;
> > +
> > +	spi_set_ctldata(spi, as_dev);
> > +	as_dev->data_need_update = true;
> > +
> > +	/* prepare device buffer */
> > +	as_dev->buf_len = SPI_NAND_CACHE_SIZE;
> > +	as_dev->txrx_buf = kzalloc(as_dev->buf_len, GFP_KERNEL);
> > +	if (!as_dev->txrx_buf)
> > +		goto error_dev_free;
> > +
> > +	as_ctrl = spi_controller_get_devdata(spi->controller);
> > +	as_dev->dma_addr = dma_map_single(as_ctrl->dev, as_dev->txrx_buf,
> > +					  as_dev->buf_len, DMA_BIDIRECTIONAL);
> > +	if (dma_mapping_error(as_ctrl->dev, as_dev->dma_addr))
> > +		goto error_buf_free;
> > +
> > +	return 0;
> > +
> > +error_buf_free:
> > +	kfree(as_dev->txrx_buf);
> > +error_dev_free:
> > +	kfree(as_dev);
> > +
> > +	return -EINVAL;
> > +}
> > +
> > +static void airoha_snand_cleanup(struct spi_device *spi)
> > +{
> > +	struct airoha_snand_dev *as_dev = spi_get_ctldata(spi);
> > +	struct airoha_snand_ctrl *as_ctrl;
> > +
> > +	as_ctrl = spi_controller_get_devdata(spi->controller);
> > +	dma_unmap_single(as_ctrl->dev, as_dev->dma_addr,
> > +			 as_dev->buf_len, DMA_BIDIRECTIONAL);
> > +	kfree(as_dev->txrx_buf);
> > +
> > +	spi_set_ctldata(spi, NULL);
> > +}
> > +
> > +static int airoha_snand_nfi_setup(struct airoha_snand_ctrl *as_ctrl)
> > +{
> > +	u32 val, sec_size, sec_num;
> > +	int err;
> > +
> > +	err = regmap_read(as_ctrl->regmap_nfi, REG_SPI_NFI_CON, &val);
> > +	if (err)
> > +		return err;
> > +
> > +	sec_num = FIELD_GET(SPI_NFI_SEC_NUM, val);
> > +
> > +	err = regmap_read(as_ctrl->regmap_nfi,
> > +			  REG_SPI_NFI_SECCUS_SIZE, &val);
> > +	if (err)
> > +		return err;
> > +
> > +	sec_size = FIELD_GET(SPI_NFI_CUS_SEC_SIZE, val);
> > +
> > +	/* init default value */
> > +	as_ctrl->nfi_cfg.sec_size = sec_size;
> > +	as_ctrl->nfi_cfg.sec_num = sec_num;
> > +	as_ctrl->nfi_cfg.page_size = rounddown(sec_size * sec_num, 1024);
> > +	as_ctrl->nfi_cfg.spare_size = 16;
> > +
> > +	err = airoha_snand_nfi_init(as_ctrl);
> > +	if (err)
> > +		return err;
> > +
> > +	return airoha_snand_nfi_config(as_ctrl);
> > +}
> > +
> > +static const struct regmap_config spi_ctrl_regmap_config = {
> > +	.name		= "ctrl",
> > +	.reg_bits	= 32,
> > +	.val_bits	= 32,
> > +	.reg_stride	= 4,
> > +	.max_register	= REG_SPI_CTRL_NFI2SPI_EN,
> > +};
> > +
> > +static const struct regmap_config spi_nfi_regmap_config = {
> > +	.name		= "nfi",
> > +	.reg_bits	= 32,
> > +	.val_bits	= 32,
> > +	.reg_stride	= 4,
> > +	.max_register	= REG_SPI_NFI_SNF_NFI_CNFG,
> > +};
> > +
> > +static const struct of_device_id airoha_snand_ids[] = {
> > +	{ .compatible	= "airoha,en7581-snand" },
> > +	{ }
> 
> { /* sentinel */ }
> 
> ...please!

ack, I will fix it in v4.

Regards,
Lorenzo

> 
> > +};
> > +MODULE_DEVICE_TABLE(of, airoha_snand_ids);
> > +
> 
> Cheers,
> Angelo
> 
>
Andy Shevchenko April 23, 2024, 11:51 p.m. UTC | #3
Tue, Apr 23, 2024 at 12:16:37PM +0200, Lorenzo Bianconi kirjoitti:
> Introduce support for SPI-NAND driver of the Airoha NAND Flash Interface
> found on Airoha ARM SoCs.

...

> +#include <linux/bitfield.h>
> +#include <linux/clk.h>
> +#include <linux/device.h>
> +#include <linux/dma-mapping.h>
> +#include <linux/init.h>
> +#include <linux/iopoll.h>

> +#include <linux/kernel.h>

Make sure you are using exact headers you need, this one seems "proxy" and not
really in use here.

(Quite likely you wanted minmax.h, types.h, and possible others.)

> +#include <linux/module.h>
> +#include <linux/mutex.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +#include <linux/spi/spi.h>
> +#include <linux/spi/spi-mem.h>

...

> +#define SPI_NFI_ALL_IRQ_EN			(SPI_NFI_RD_DONE_EN | \
> +						 SPI_NFI_WR_DONE_EN | \
> +						 SPI_NFI_RST_DONE_EN | \
> +						 SPI_NFI_ERASE_DONE_EN | \
> +						 SPI_NFI_BUSY_RETURN_EN | \
> +						 SPI_NFI_ACCESS_LOCK_EN | \
> +						 SPI_NFI_AHB_DONE_EN)

What about writing this as

#define SPI_NFI_ALL_IRQ_EN					\
	(SPI_NFI_RD_DONE_EN | SPI_NFI_WR_DONE_EN |		\
	 SPI_NFI_RST_DONE_EN | SPI_NFI_ERASE_DONE_EN |		\
	 SPI_NFI_BUSY_RETURN_EN | SPI_NFI_ACCESS_LOCK_EN |	\
	 SPI_NFI_AHB_DONE_EN)

?

...

> +enum airoha_snand_mode {
> +	SPI_MODE_AUTO,
> +	SPI_MODE_MANUAL,
> +	SPI_MODE_DMA,
> +	SPI_MODE_NO

Is _NO a termination entry? Meaning there always be only 3 modes no matter
what. If not, leave the trailing comma as it helps to reduce a burden in case
this list will be expanded.

> +};

...

> +struct airoha_snand_dev {
> +	size_t buf_len;
> +
> +	u8 *txrx_buf;
> +	dma_addr_t dma_addr;
> +
> +	bool data_need_update;
> +	u64 cur_page_num;
> +};

Most likely `pahole` shows better layout to save a few bytes in some cases.

...

> +struct airoha_snand_ctrl {
> +	struct device *dev;
> +	struct regmap *regmap_ctrl;
> +	struct regmap *regmap_nfi;
> +	struct clk *spi_clk;
> +
> +	struct {
> +		size_t page_size;
> +		size_t sec_size;

> +		unsigned char sec_num;
> +		unsigned char spare_size;

Hmm... Why not u8 for both of these?

> +	} nfi_cfg;
> +};

...

> +static int airoha_snand_write_data(struct airoha_snand_ctrl *as_ctrl, u8 cmd,
> +				   const u8 *data, int len)
> +{
> +	int i = 0;
> +
> +	while (i < len) {

Seems nothing prevents you from using for-loop here as well.

> +		int data_len = min(len, MAX_TRANSFER_SIZE);
> +		int err;
> +
> +		err = airoha_snand_set_fifo_op(as_ctrl, cmd, data_len);
> +		if (err)
> +			return err;
> +
> +		err = airoha_snand_write_data_to_fifo(as_ctrl, &data[i],
> +						      data_len);
> +		if (err < 0)
> +			return err;
> +
> +		i += data_len;
> +	}
> +
> +	return 0;
> +}

...

> +static int airoha_snand_read_data(struct airoha_snand_ctrl *as_ctrl, u8 *data,
> +				  int len)

As per above.

...

> +	/* addr part */
> +	for (i = 0; i < op->addr.nbytes; i++) {
> +		u8 cmd = opcode == SPI_NAND_OP_GET_FEATURE ? 0x11 : 0x8;
> +
> +		data = op->addr.val >> ((op->addr.nbytes - i - 1) * 8);

Seems like you wanted to have always the same endianess and hence can be done
outside the loop via cpu_to_xxx()?

> +		err = airoha_snand_write_data(as_ctrl, cmd, &data,
> +					      sizeof(data));
> +		if (err)
> +			return err;
> +	}

...

> +static int airoha_snand_setup(struct spi_device *spi)
> +{
> +	struct airoha_snand_dev *as_dev = spi_get_ctldata(spi);
> +	struct airoha_snand_ctrl *as_ctrl;
> +
> +	as_dev = kzalloc(sizeof(*as_dev), GFP_KERNEL);
> +	if (!as_dev)
> +		return -ENOMEM;
> +
> +	spi_set_ctldata(spi, as_dev);
> +	as_dev->data_need_update = true;
> +
> +	/* prepare device buffer */
> +	as_dev->buf_len = SPI_NAND_CACHE_SIZE;
> +	as_dev->txrx_buf = kzalloc(as_dev->buf_len, GFP_KERNEL);
> +	if (!as_dev->txrx_buf)
> +		goto error_dev_free;
> +
> +	as_ctrl = spi_controller_get_devdata(spi->controller);
> +	as_dev->dma_addr = dma_map_single(as_ctrl->dev, as_dev->txrx_buf,
> +					  as_dev->buf_len, DMA_BIDIRECTIONAL);
> +	if (dma_mapping_error(as_ctrl->dev, as_dev->dma_addr))
> +		goto error_buf_free;
> +
> +	return 0;
> +
> +error_buf_free:
> +	kfree(as_dev->txrx_buf);
> +error_dev_free:
> +	kfree(as_dev);

Why not utilising cleanup.h? (__free(), no_free_ptr(), etc)

> +	return -EINVAL;
> +}

...

> +	err = regmap_read(as_ctrl->regmap_nfi,
> +			  REG_SPI_NFI_SECCUS_SIZE, &val);

One line?

> +	if (err)
> +		return err;

...

> +	as_ctrl->nfi_cfg.page_size = rounddown(sec_size * sec_num, 1024);

round_down() is optimised for power-of-2.
You would need to include math.h IIRC.

...

> +	as_ctrl->regmap_ctrl = devm_regmap_init_mmio(&pdev->dev, base,
> +						     &spi_ctrl_regmap_config);

With help of

	struct device *dev = &pdev->dev;

at the top of the function the entire code will become neater.

> +	if (IS_ERR(as_ctrl->regmap_ctrl)) {
> +		dev_err(&pdev->dev, "failed to init spi ctrl regmap: %ld\n",
> +			PTR_ERR(as_ctrl->regmap_ctrl));
> +		return PTR_ERR(as_ctrl->regmap_ctrl);

		return dev_err_probe(...);

> +	}

...

> +		dev_err(&pdev->dev, "failed to init spi nfi regmap: %ld\n",
> +			PTR_ERR(as_ctrl->regmap_nfi));
> +		return PTR_ERR(as_ctrl->regmap_nfi);

		return dev_err_probe(...);

...

> +		dev_err(&pdev->dev, "unable to get spi clk");
> +		return PTR_ERR(as_ctrl->spi_clk);

Ditto.

...

> +

Unneeded blank line.

> +module_platform_driver(airoha_snand_driver);
Lorenzo Bianconi April 24, 2024, 10:06 a.m. UTC | #4
> Tue, Apr 23, 2024 at 12:16:37PM +0200, Lorenzo Bianconi kirjoitti:
> > Introduce support for SPI-NAND driver of the Airoha NAND Flash Interface
> > found on Airoha ARM SoCs.
> 
> ...
> 
> > +#include <linux/bitfield.h>
> > +#include <linux/clk.h>
> > +#include <linux/device.h>
> > +#include <linux/dma-mapping.h>
> > +#include <linux/init.h>
> > +#include <linux/iopoll.h>
> 
> > +#include <linux/kernel.h>
> 
> Make sure you are using exact headers you need, this one seems "proxy" and not
> really in use here.
> 
> (Quite likely you wanted minmax.h, types.h, and possible others.)

ack, I will fix it.

> 
> > +#include <linux/module.h>
> > +#include <linux/mutex.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/regmap.h>
> > +#include <linux/spi/spi.h>
> > +#include <linux/spi/spi-mem.h>
> 
> ...
> 
> > +#define SPI_NFI_ALL_IRQ_EN			(SPI_NFI_RD_DONE_EN | \
> > +						 SPI_NFI_WR_DONE_EN | \
> > +						 SPI_NFI_RST_DONE_EN | \
> > +						 SPI_NFI_ERASE_DONE_EN | \
> > +						 SPI_NFI_BUSY_RETURN_EN | \
> > +						 SPI_NFI_ACCESS_LOCK_EN | \
> > +						 SPI_NFI_AHB_DONE_EN)
> 
> What about writing this as
> 
> #define SPI_NFI_ALL_IRQ_EN					\
> 	(SPI_NFI_RD_DONE_EN | SPI_NFI_WR_DONE_EN |		\
> 	 SPI_NFI_RST_DONE_EN | SPI_NFI_ERASE_DONE_EN |		\
> 	 SPI_NFI_BUSY_RETURN_EN | SPI_NFI_ACCESS_LOCK_EN |	\
> 	 SPI_NFI_AHB_DONE_EN)
> 
> ?

no strong opinion about it, I will fix it.

> 
> ...
> 
> > +enum airoha_snand_mode {
> > +	SPI_MODE_AUTO,
> > +	SPI_MODE_MANUAL,
> > +	SPI_MODE_DMA,
> > +	SPI_MODE_NO
> 
> Is _NO a termination entry? Meaning there always be only 3 modes no matter
> what. If not, leave the trailing comma as it helps to reduce a burden in case
> this list will be expanded.

I think we can get rid of it

> 
> > +};
> 
> ...
> 
> > +struct airoha_snand_dev {
> > +	size_t buf_len;
> > +
> > +	u8 *txrx_buf;
> > +	dma_addr_t dma_addr;
> > +
> > +	bool data_need_update;
> > +	u64 cur_page_num;
> > +};
> 
> Most likely `pahole` shows better layout to save a few bytes in some cases.

ack, I think we can swap data_need_update and cur_page_num.

> 
> ...
> 
> > +struct airoha_snand_ctrl {
> > +	struct device *dev;
> > +	struct regmap *regmap_ctrl;
> > +	struct regmap *regmap_nfi;
> > +	struct clk *spi_clk;
> > +
> > +	struct {
> > +		size_t page_size;
> > +		size_t sec_size;
> 
> > +		unsigned char sec_num;
> > +		unsigned char spare_size;
> 
> Hmm... Why not u8 for both of these?

ack, I will fix it.

> 
> > +	} nfi_cfg;
> > +};
> 
> ...
> 
> > +static int airoha_snand_write_data(struct airoha_snand_ctrl *as_ctrl, u8 cmd,
> > +				   const u8 *data, int len)
> > +{
> > +	int i = 0;
> > +
> > +	while (i < len) {
> 
> Seems nothing prevents you from using for-loop here as well.

ack, I will fix it.

> 
> > +		int data_len = min(len, MAX_TRANSFER_SIZE);
> > +		int err;
> > +
> > +		err = airoha_snand_set_fifo_op(as_ctrl, cmd, data_len);
> > +		if (err)
> > +			return err;
> > +
> > +		err = airoha_snand_write_data_to_fifo(as_ctrl, &data[i],
> > +						      data_len);
> > +		if (err < 0)
> > +			return err;
> > +
> > +		i += data_len;
> > +	}
> > +
> > +	return 0;
> > +}
> 
> ...
> 
> > +static int airoha_snand_read_data(struct airoha_snand_ctrl *as_ctrl, u8 *data,
> > +				  int len)
> 
> As per above.

ack, I will fix it.

> 
> ...
> 
> > +	/* addr part */
> > +	for (i = 0; i < op->addr.nbytes; i++) {
> > +		u8 cmd = opcode == SPI_NAND_OP_GET_FEATURE ? 0x11 : 0x8;
> > +
> > +		data = op->addr.val >> ((op->addr.nbytes - i - 1) * 8);
> 
> Seems like you wanted to have always the same endianess and hence can be done
> outside the loop via cpu_to_xxx()?

sorry, I did not get what you mean here, data value relies on the loop
iteration.

> 
> > +		err = airoha_snand_write_data(as_ctrl, cmd, &data,
> > +					      sizeof(data));
> > +		if (err)
> > +			return err;
> > +	}
> 
> ...
> 
> > +static int airoha_snand_setup(struct spi_device *spi)
> > +{
> > +	struct airoha_snand_dev *as_dev = spi_get_ctldata(spi);
> > +	struct airoha_snand_ctrl *as_ctrl;
> > +
> > +	as_dev = kzalloc(sizeof(*as_dev), GFP_KERNEL);
> > +	if (!as_dev)
> > +		return -ENOMEM;
> > +
> > +	spi_set_ctldata(spi, as_dev);
> > +	as_dev->data_need_update = true;
> > +
> > +	/* prepare device buffer */
> > +	as_dev->buf_len = SPI_NAND_CACHE_SIZE;
> > +	as_dev->txrx_buf = kzalloc(as_dev->buf_len, GFP_KERNEL);
> > +	if (!as_dev->txrx_buf)
> > +		goto error_dev_free;
> > +
> > +	as_ctrl = spi_controller_get_devdata(spi->controller);
> > +	as_dev->dma_addr = dma_map_single(as_ctrl->dev, as_dev->txrx_buf,
> > +					  as_dev->buf_len, DMA_BIDIRECTIONAL);
> > +	if (dma_mapping_error(as_ctrl->dev, as_dev->dma_addr))
> > +		goto error_buf_free;
> > +
> > +	return 0;
> > +
> > +error_buf_free:
> > +	kfree(as_dev->txrx_buf);
> > +error_dev_free:
> > +	kfree(as_dev);
> 
> Why not utilising cleanup.h? (__free(), no_free_ptr(), etc)

I guess we can just allocate as_dev and as_dev->txrx_buf with devm_kzalloc()
here, agree?

> 
> > +	return -EINVAL;
> > +}
> 
> ...
> 
> > +	err = regmap_read(as_ctrl->regmap_nfi,
> > +			  REG_SPI_NFI_SECCUS_SIZE, &val);
> 
> One line?

ack, I will fix it.

> 
> > +	if (err)
> > +		return err;
> 
> ...
> 
> > +	as_ctrl->nfi_cfg.page_size = rounddown(sec_size * sec_num, 1024);
> 
> round_down() is optimised for power-of-2.
> You would need to include math.h IIRC.

ack, I will fix it.
> 
> ...
> 
> > +	as_ctrl->regmap_ctrl = devm_regmap_init_mmio(&pdev->dev, base,
> > +						     &spi_ctrl_regmap_config);
> 
> With help of
> 
> 	struct device *dev = &pdev->dev;
> 
> at the top of the function the entire code will become neater.

ack, I will fix it.

> 
> > +	if (IS_ERR(as_ctrl->regmap_ctrl)) {
> > +		dev_err(&pdev->dev, "failed to init spi ctrl regmap: %ld\n",
> > +			PTR_ERR(as_ctrl->regmap_ctrl));
> > +		return PTR_ERR(as_ctrl->regmap_ctrl);
> 
> 		return dev_err_probe(...);
> 
> > +	}
> 
> ...
> 
> > +		dev_err(&pdev->dev, "failed to init spi nfi regmap: %ld\n",
> > +			PTR_ERR(as_ctrl->regmap_nfi));
> > +		return PTR_ERR(as_ctrl->regmap_nfi);
> 
> 		return dev_err_probe(...);
> 
> ...
> 
> > +		dev_err(&pdev->dev, "unable to get spi clk");
> > +		return PTR_ERR(as_ctrl->spi_clk);
> 
> Ditto.
> 
> ...
> 
> > +
> 
> Unneeded blank line.

ack, I will fix it.

Regards,
Lorenzo

> 
> > +module_platform_driver(airoha_snand_driver);
> 
> -- 
> With Best Regards,
> Andy Shevchenko
> 
> 
>
Andy Shevchenko April 24, 2024, 12:51 p.m. UTC | #5
On Wed, Apr 24, 2024 at 1:07 PM Lorenzo Bianconi <lorenzo@kernel.org> wrote:
> > Tue, Apr 23, 2024 at 12:16:37PM +0200, Lorenzo Bianconi kirjoitti:

...

> > > +   /* addr part */
> > > +   for (i = 0; i < op->addr.nbytes; i++) {
> > > +           u8 cmd = opcode == SPI_NAND_OP_GET_FEATURE ? 0x11 : 0x8;
> > > +
> > > +           data = op->addr.val >> ((op->addr.nbytes - i - 1) * 8);
> >
> > Seems like you wanted to have always the same endianess and hence can be done
> > outside the loop via cpu_to_xxx()?
>
> sorry, I did not get what you mean here, data value relies on the loop
> iteration.

  u8 byte_stream[8];
  u8 cmd;

  cmd = ...;

  // find what suits your case(s)
  put_unaligned_be64(op->addr.val, byte_stream);
  for-loop {
     err = _write_data();
     ...
  }


> > > +           err = airoha_snand_write_data(as_ctrl, cmd, &data,
> > > +                                         sizeof(data));
> > > +           if (err)
> > > +                   return err;
> > > +   }

...

> > Why not utilising cleanup.h? (__free(), no_free_ptr(), etc)
>
> I guess we can just allocate as_dev and as_dev->txrx_buf with devm_kzalloc()
> here, agree?

If this is a solely part of ->probe() stage, yes.
Lorenzo Bianconi April 24, 2024, 2:38 p.m. UTC | #6
> On Wed, Apr 24, 2024 at 1:07 PM Lorenzo Bianconi <lorenzo@kernel.org> wrote:
> > > Tue, Apr 23, 2024 at 12:16:37PM +0200, Lorenzo Bianconi kirjoitti:
> 
> ...
> 
> > > > +   /* addr part */
> > > > +   for (i = 0; i < op->addr.nbytes; i++) {
> > > > +           u8 cmd = opcode == SPI_NAND_OP_GET_FEATURE ? 0x11 : 0x8;
> > > > +
> > > > +           data = op->addr.val >> ((op->addr.nbytes - i - 1) * 8);
> > >
> > > Seems like you wanted to have always the same endianess and hence can be done
> > > outside the loop via cpu_to_xxx()?
> >
> > sorry, I did not get what you mean here, data value relies on the loop
> > iteration.
> 
>   u8 byte_stream[8];
>   u8 cmd;
> 
>   cmd = ...;
> 
>   // find what suits your case(s)
>   put_unaligned_be64(op->addr.val, byte_stream);
>   for-loop {
>      err = _write_data();
>      ...
>   }

ack, I will fix it in v4.

Rregards,
Lorenzo

> 
> 
> > > > +           err = airoha_snand_write_data(as_ctrl, cmd, &data,
> > > > +                                         sizeof(data));
> > > > +           if (err)
> > > > +                   return err;
> > > > +   }
> 
> ...
> 
> > > Why not utilising cleanup.h? (__free(), no_free_ptr(), etc)
> >
> > I guess we can just allocate as_dev and as_dev->txrx_buf with devm_kzalloc()
> > here, agree?
> 
> If this is a solely part of ->probe() stage, yes.
> 
> -- 
> With Best Regards,
> Andy Shevchenko
diff mbox series

Patch

diff --git a/MAINTAINERS b/MAINTAINERS
index aa3b947fb080..ce9fac46f741 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -653,6 +653,15 @@  S:	Supported
 F:	fs/aio.c
 F:	include/linux/*aio*.h
 
+AIROHA SPI SNFI DRIVER
+M:	Lorenzo Bianconi <lorenzo@kernel.org>
+M:	Ray Liu <ray.liu@airoha.com>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+L:	linux-spi@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/spi/airoha,en7581-snand.yaml
+F:	drivers/spi/spi-airoha.c
+
 AIRSPY MEDIA DRIVER
 L:	linux-media@vger.kernel.org
 S:	Orphan
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index bc7021da2fe9..6fa91775f334 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -57,6 +57,16 @@  config SPI_MEM
 
 comment "SPI Master Controller Drivers"
 
+config SPI_AIROHA_SNFI
+	tristate "Airoha SPI NAND Flash Interface"
+	depends on ARCH_AIROHA || COMPILE_TEST
+	depends on SPI_MASTER
+	select REGMAP_MMIO
+	help
+	  This enables support for SPI-NAND mode on the Airoha NAND
+	  Flash Interface found on Airoha ARM SoCs. This controller
+	  is implemented as a SPI-MEM controller.
+
 config SPI_ALTERA
 	tristate "Altera SPI Controller platform driver"
 	select SPI_ALTERA_CORE
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 4ff8d725ba5e..e694254dec04 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -14,6 +14,7 @@  obj-$(CONFIG_SPI_SPIDEV)		+= spidev.o
 obj-$(CONFIG_SPI_LOOPBACK_TEST)		+= spi-loopback-test.o
 
 # SPI master controller drivers (bus)
+obj-$(CONFIG_SPI_AIROHA_SNFI)		+= spi-airoha-snfi.o
 obj-$(CONFIG_SPI_ALTERA)		+= spi-altera-platform.o
 obj-$(CONFIG_SPI_ALTERA_CORE)		+= spi-altera-core.o
 obj-$(CONFIG_SPI_ALTERA_DFL)		+= spi-altera-dfl.o
diff --git a/drivers/spi/spi-airoha-snfi.c b/drivers/spi/spi-airoha-snfi.c
new file mode 100644
index 000000000000..eacb32d6e28e
--- /dev/null
+++ b/drivers/spi/spi-airoha-snfi.c
@@ -0,0 +1,1156 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2024 AIROHA Inc
+ * Author: Lorenzo Bianconi <lorenzo@kernel.org>
+ * Author: Ray Liu <ray.liu@airoha.com>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/init.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi-mem.h>
+
+/* SPI */
+#define REG_SPI_CTRL_BASE			0x1FA10000
+
+#define REG_SPI_CTRL_READ_MODE			0x0000
+#define REG_SPI_CTRL_READ_IDLE_EN		0x0004
+#define REG_SPI_CTRL_SIDLY			0x0008
+#define REG_SPI_CTRL_CSHEXT			0x000c
+#define REG_SPI_CTRL_CSLEXT			0x0010
+
+#define REG_SPI_CTRL_MTX_MODE_TOG		0x0014
+#define SPI_CTRL_MTX_MODE_TOG			GENMASK(3, 0)
+
+#define REG_SPI_CTRL_RDCTL_FSM			0x0018
+#define SPI_CTRL_RDCTL_FSM			GENMASK(3, 0)
+
+#define REG_SPI_CTRL_MACMUX_SEL			0x001c
+
+#define REG_SPI_CTRL_MANUAL_EN			0x0020
+#define SPI_CTRL_MANUAL_EN			BIT(0)
+
+#define REG_SPI_CTRL_OPFIFO_EMPTY		0x0024
+#define SPI_CTRL_OPFIFO_EMPTY			BIT(0)
+
+#define REG_SPI_CTRL_OPFIFO_WDATA		0x0028
+#define SPI_CTRL_OPFIFO_LEN			GENMASK(8, 0)
+#define SPI_CTRL_OPFIFO_OP			GENMASK(13, 9)
+
+#define REG_SPI_CTRL_OPFIFO_FULL		0x002c
+#define SPI_CTRL_OPFIFO_FULL			BIT(0)
+
+#define REG_SPI_CTRL_OPFIFO_WR			0x0030
+#define SPI_CTRL_OPFIFO_WR			BIT(0)
+
+#define REG_SPI_CTRL_DFIFO_FULL			0x0034
+#define SPI_CTRL_DFIFO_FULL			BIT(0)
+
+#define REG_SPI_CTRL_DFIFO_WDATA		0x0038
+#define SPI_CTRL_DFIFO_WDATA			GENMASK(7, 0)
+
+#define REG_SPI_CTRL_DFIFO_EMPTY		0x003c
+#define SPI_CTRL_DFIFO_EMPTY			BIT(0)
+
+#define REG_SPI_CTRL_DFIFO_RD			0x0040
+#define SPI_CTRL_DFIFO_RD			BIT(0)
+
+#define REG_SPI_CTRL_DFIFO_RDATA		0x0044
+#define SPI_CTRL_DFIFO_RDATA			GENMASK(7, 0)
+
+#define REG_SPI_CTRL_DUMMY			0x0080
+#define SPI_CTRL_CTRL_DUMMY			GENMASK(3, 0)
+
+#define REG_SPI_CTRL_PROBE_SEL			0x0088
+#define REG_SPI_CTRL_INTERRUPT			0x0090
+#define REG_SPI_CTRL_INTERRUPT_EN		0x0094
+#define REG_SPI_CTRL_SI_CK_SEL			0x009c
+#define REG_SPI_CTRL_SW_CFGNANDADDR_VAL		0x010c
+#define REG_SPI_CTRL_SW_CFGNANDADDR_EN		0x0110
+#define REG_SPI_CTRL_SFC_STRAP			0x0114
+
+#define REG_SPI_CTRL_NFI2SPI_EN			0x0130
+#define SPI_CTRL_NFI2SPI_EN			BIT(0)
+
+/* NFI2SPI */
+#define REG_SPI_NFI_CNFG			0x0000
+#define SPI_NFI_DMA_MODE			BIT(0)
+#define SPI_NFI_READ_MODE			BIT(1)
+#define SPI_NFI_DMA_BURST_EN			BIT(2)
+#define SPI_NFI_HW_ECC_EN			BIT(8)
+#define SPI_NFI_AUTO_FDM_EN			BIT(9)
+#define SPI_NFI_OPMODE				GENMASK(14, 12)
+
+#define REG_SPI_NFI_PAGEFMT			0x0004
+#define SPI_NFI_PAGE_SIZE			GENMASK(1, 0)
+#define SPI_NFI_SPARE_SIZE			GENMASK(5, 4)
+
+#define REG_SPI_NFI_CON				0x0008
+#define SPI_NFI_FIFO_FLUSH			BIT(0)
+#define SPI_NFI_RST				BIT(1)
+#define SPI_NFI_RD_TRIG				BIT(8)
+#define SPI_NFI_WR_TRIG				BIT(9)
+#define SPI_NFI_SEC_NUM				GENMASK(15, 12)
+
+#define REG_SPI_NFI_INTR_EN			0x0010
+#define SPI_NFI_RD_DONE_EN			BIT(0)
+#define SPI_NFI_WR_DONE_EN			BIT(1)
+#define SPI_NFI_RST_DONE_EN			BIT(2)
+#define SPI_NFI_ERASE_DONE_EN			BIT(3)
+#define SPI_NFI_BUSY_RETURN_EN			BIT(4)
+#define SPI_NFI_ACCESS_LOCK_EN			BIT(5)
+#define SPI_NFI_AHB_DONE_EN			BIT(6)
+#define SPI_NFI_ALL_IRQ_EN			(SPI_NFI_RD_DONE_EN | \
+						 SPI_NFI_WR_DONE_EN | \
+						 SPI_NFI_RST_DONE_EN | \
+						 SPI_NFI_ERASE_DONE_EN | \
+						 SPI_NFI_BUSY_RETURN_EN | \
+						 SPI_NFI_ACCESS_LOCK_EN | \
+						 SPI_NFI_AHB_DONE_EN)
+
+#define REG_SPI_NFI_INTR			0x0014
+#define SPI_NFI_AHB_DONE			BIT(6)
+
+#define REG_SPI_NFI_CMD				0x0020
+
+#define REG_SPI_NFI_ADDR_NOB			0x0030
+#define SPI_NFI_ROW_ADDR_NOB			GENMASK(6, 4)
+
+#define REG_SPI_NFI_STA				0x0060
+#define REG_SPI_NFI_FIFOSTA			0x0064
+#define REG_SPI_NFI_STRADDR			0x0080
+#define REG_SPI_NFI_FDM0L			0x00a0
+#define REG_SPI_NFI_FDM0M			0x00a4
+#define REG_SPI_NFI_FDM7L			0x00d8
+#define REG_SPI_NFI_FDM7M			0x00dc
+#define REG_SPI_NFI_FIFODATA0			0x0190
+#define REG_SPI_NFI_FIFODATA1			0x0194
+#define REG_SPI_NFI_FIFODATA2			0x0198
+#define REG_SPI_NFI_FIFODATA3			0x019c
+#define REG_SPI_NFI_MASTERSTA			0x0224
+
+#define REG_SPI_NFI_SECCUS_SIZE			0x022c
+#define SPI_NFI_CUS_SEC_SIZE			GENMASK(12, 0)
+#define SPI_NFI_CUS_SEC_SIZE_EN			BIT(16)
+
+#define REG_SPI_NFI_RD_CTL2			0x0510
+#define REG_SPI_NFI_RD_CTL3			0x0514
+
+#define REG_SPI_NFI_PG_CTL1			0x0524
+#define SPI_NFI_PG_LOAD_CMD			GENMASK(15, 8)
+
+#define REG_SPI_NFI_PG_CTL2			0x0528
+#define REG_SPI_NFI_NOR_PROG_ADDR		0x052c
+#define REG_SPI_NFI_NOR_RD_ADDR			0x0534
+
+#define REG_SPI_NFI_SNF_MISC_CTL		0x0538
+#define SPI_NFI_DATA_READ_WR_MODE		GENMASK(18, 16)
+
+#define REG_SPI_NFI_SNF_MISC_CTL2		0x053c
+#define SPI_NFI_READ_DATA_BYTE_NUM		GENMASK(12, 0)
+#define SPI_NFI_PROG_LOAD_BYTE_NUM		GENMASK(28, 16)
+
+#define REG_SPI_NFI_SNF_STA_CTL1		0x0550
+#define SPI_NFI_READ_FROM_CACHE_DONE		BIT(25)
+#define SPI_NFI_LOAD_TO_CACHE_DONE		BIT(26)
+
+#define REG_SPI_NFI_SNF_STA_CTL2		0x0554
+
+#define REG_SPI_NFI_SNF_NFI_CNFG		0x055c
+#define SPI_NFI_SPI_MODE			BIT(0)
+
+/* SPI NAND Protocol OP */
+#define SPI_NAND_OP_GET_FEATURE			0x0f
+#define SPI_NAND_OP_SET_FEATURE			0x1f
+#define SPI_NAND_OP_PAGE_READ			0x13
+#define SPI_NAND_OP_READ_FROM_CACHE_SINGLE	0x03
+#define SPI_NAND_OP_READ_FROM_CACHE_SINGLE_FAST	0x0b
+#define SPI_NAND_OP_READ_FROM_CACHE_DUAL	0x3b
+#define SPI_NAND_OP_READ_FROM_CACHE_QUAD	0x6b
+#define SPI_NAND_OP_WRITE_ENABLE		0x06
+#define SPI_NAND_OP_WRITE_DISABLE		0x04
+#define SPI_NAND_OP_PROGRAM_LOAD_SINGLE		0x02
+#define SPI_NAND_OP_PROGRAM_LOAD_QUAD		0x32
+#define SPI_NAND_OP_PROGRAM_LOAD_RAMDOM_SINGLE	0x84
+#define SPI_NAND_OP_PROGRAM_LOAD_RAMDON_QUAD	0x34
+#define SPI_NAND_OP_PROGRAM_EXECUTE		0x10
+#define SPI_NAND_OP_READ_ID			0x9f
+#define SPI_NAND_OP_BLOCK_ERASE			0xd8
+#define SPI_NAND_OP_RESET			0xff
+#define SPI_NAND_OP_DIE_SELECT			0xc2
+
+enum airoha_snand_mode {
+	SPI_MODE_AUTO,
+	SPI_MODE_MANUAL,
+	SPI_MODE_DMA,
+	SPI_MODE_NO
+};
+
+enum airoha_snand_cs {
+	SPI_CHIP_SEL_HIGH,
+	SPI_CHIP_SEL_LOW,
+};
+
+struct airoha_snand_dev {
+	size_t buf_len;
+
+	u8 *txrx_buf;
+	dma_addr_t dma_addr;
+
+	bool data_need_update;
+	u64 cur_page_num;
+};
+
+struct airoha_snand_ctrl {
+	struct device *dev;
+	struct regmap *regmap_ctrl;
+	struct regmap *regmap_nfi;
+	struct clk *spi_clk;
+
+	struct {
+		size_t page_size;
+		size_t sec_size;
+		unsigned char sec_num;
+		unsigned char spare_size;
+	} nfi_cfg;
+};
+
+static int airoha_snand_set_fifo_op(struct airoha_snand_ctrl *as_ctrl,
+				    u8 op_cmd, int op_len)
+{
+	int err;
+	u32 val;
+
+	err = regmap_write(as_ctrl->regmap_ctrl, REG_SPI_CTRL_OPFIFO_WDATA,
+			   FIELD_PREP(SPI_CTRL_OPFIFO_LEN, op_len) |
+			   FIELD_PREP(SPI_CTRL_OPFIFO_OP, op_cmd));
+	if (err)
+		return err;
+
+	err = regmap_read_poll_timeout(as_ctrl->regmap_ctrl,
+				       REG_SPI_CTRL_OPFIFO_FULL,
+				       val, !(val & SPI_CTRL_OPFIFO_FULL),
+				       0, 250 * USEC_PER_MSEC);
+	if (err)
+		return err;
+
+	err = regmap_write(as_ctrl->regmap_ctrl, REG_SPI_CTRL_OPFIFO_WR,
+			   SPI_CTRL_OPFIFO_WR);
+	if (err)
+		return err;
+
+	return regmap_read_poll_timeout(as_ctrl->regmap_ctrl,
+					REG_SPI_CTRL_OPFIFO_EMPTY,
+					val, (val & SPI_CTRL_OPFIFO_EMPTY),
+					0, 250 * USEC_PER_MSEC);
+}
+
+static int airoha_snand_set_cs(struct airoha_snand_ctrl *as_ctrl, u8 cs)
+{
+	return airoha_snand_set_fifo_op(as_ctrl, cs, sizeof(cs));
+}
+
+static int airoha_snand_write_data_to_fifo(struct airoha_snand_ctrl *as_ctrl,
+					   const u8 *data, int len)
+{
+	int i;
+
+	for (i = 0; i < len; i++) {
+		int err;
+		u32 val;
+
+		/* 1. Wait until dfifo is not full */
+		err = regmap_read_poll_timeout(as_ctrl->regmap_ctrl,
+					       REG_SPI_CTRL_DFIFO_FULL, val,
+					       !(val & SPI_CTRL_DFIFO_FULL),
+					       0, 250 * USEC_PER_MSEC);
+		if (err)
+			return err;
+
+		/* 2. Write data to register DFIFO_WDATA */
+		err = regmap_write(as_ctrl->regmap_ctrl,
+				   REG_SPI_CTRL_DFIFO_WDATA,
+				   FIELD_PREP(SPI_CTRL_DFIFO_WDATA, data[i]));
+		if (err)
+			return err;
+
+		/* 3. Wait until dfifo is not full */
+		err = regmap_read_poll_timeout(as_ctrl->regmap_ctrl,
+					       REG_SPI_CTRL_DFIFO_FULL, val,
+					       !(val & SPI_CTRL_DFIFO_FULL),
+					       0, 250 * USEC_PER_MSEC);
+		if (err)
+			return err;
+	}
+
+	return 0;
+}
+
+static int airoha_snand_read_data_from_fifo(struct airoha_snand_ctrl *as_ctrl,
+					    u8 *ptr, int len)
+{
+	int i;
+
+	for (i = 0; i < len; i++) {
+		int err;
+		u32 val;
+
+		/* 1. wait until dfifo is not empty */
+		err = regmap_read_poll_timeout(as_ctrl->regmap_ctrl,
+					       REG_SPI_CTRL_DFIFO_EMPTY, val,
+					       !(val & SPI_CTRL_DFIFO_EMPTY),
+					       0, 250 * USEC_PER_MSEC);
+		if (err)
+			return err;
+
+		/* 2. read from dfifo to register DFIFO_RDATA */
+		err = regmap_read(as_ctrl->regmap_ctrl,
+				  REG_SPI_CTRL_DFIFO_RDATA, &val);
+		if (err)
+			return err;
+
+		ptr[i] = FIELD_GET(SPI_CTRL_DFIFO_RDATA, val);
+		/* 3. enable register DFIFO_RD to read next byte */
+		err = regmap_write(as_ctrl->regmap_ctrl,
+				   REG_SPI_CTRL_DFIFO_RD, SPI_CTRL_DFIFO_RD);
+		if (err)
+			return err;
+	}
+
+	return 0;
+}
+
+static int airoha_snand_set_mode(struct airoha_snand_ctrl *as_ctrl,
+				 enum airoha_snand_mode mode)
+{
+	int err;
+
+	switch (mode) {
+	case SPI_MODE_MANUAL: {
+		u32 val;
+
+		err = regmap_write(as_ctrl->regmap_ctrl,
+				   REG_SPI_CTRL_NFI2SPI_EN, 0);
+		if (err)
+			return err;
+
+		err = regmap_write(as_ctrl->regmap_ctrl,
+				   REG_SPI_CTRL_READ_IDLE_EN, 0);
+		if (err)
+			return err;
+
+		err = regmap_read_poll_timeout(as_ctrl->regmap_ctrl,
+					       REG_SPI_CTRL_RDCTL_FSM, val,
+					       !(val & SPI_CTRL_RDCTL_FSM),
+					       0, 250 * USEC_PER_MSEC);
+		if (err)
+			return err;
+
+		err = regmap_write(as_ctrl->regmap_ctrl,
+				   REG_SPI_CTRL_MTX_MODE_TOG, 9);
+		if (err)
+			return err;
+
+		err = regmap_write(as_ctrl->regmap_ctrl,
+				   REG_SPI_CTRL_MANUAL_EN, SPI_CTRL_MANUAL_EN);
+		if (err)
+			return err;
+		break;
+	}
+	case SPI_MODE_DMA:
+		err = regmap_write(as_ctrl->regmap_ctrl,
+				   REG_SPI_CTRL_NFI2SPI_EN,
+				   SPI_CTRL_MANUAL_EN);
+		if (err < 0)
+			return err;
+
+		err = regmap_write(as_ctrl->regmap_ctrl,
+				   REG_SPI_CTRL_MTX_MODE_TOG, 0x0);
+		if (err < 0)
+			return err;
+
+		err = regmap_write(as_ctrl->regmap_ctrl,
+				   REG_SPI_CTRL_MANUAL_EN, 0x0);
+		if (err < 0)
+			return err;
+		break;
+	case SPI_MODE_AUTO:
+	default:
+		break;
+	}
+
+	return regmap_write(as_ctrl->regmap_ctrl, REG_SPI_CTRL_DUMMY, 0);
+}
+
+#define MAX_TRANSFER_SIZE	511
+static int airoha_snand_write_data(struct airoha_snand_ctrl *as_ctrl, u8 cmd,
+				   const u8 *data, int len)
+{
+	int i = 0;
+
+	while (i < len) {
+		int data_len = min(len, MAX_TRANSFER_SIZE);
+		int err;
+
+		err = airoha_snand_set_fifo_op(as_ctrl, cmd, data_len);
+		if (err)
+			return err;
+
+		err = airoha_snand_write_data_to_fifo(as_ctrl, &data[i],
+						      data_len);
+		if (err < 0)
+			return err;
+
+		i += data_len;
+	}
+
+	return 0;
+}
+
+static int airoha_snand_read_data(struct airoha_snand_ctrl *as_ctrl, u8 *data,
+				  int len)
+{
+	int i = 0;
+
+	while (i < len) {
+		int err, data_len = min(len, MAX_TRANSFER_SIZE);
+
+		err = airoha_snand_set_fifo_op(as_ctrl, 0xc, data_len);
+		if (err)
+			return err;
+
+		err = airoha_snand_read_data_from_fifo(as_ctrl, &data[i],
+						       data_len);
+		if (err < 0)
+			return err;
+
+		i += data_len;
+	}
+
+	return 0;
+}
+
+static int airoha_snand_nfi_init(struct airoha_snand_ctrl *as_ctrl)
+{
+	int err;
+
+	/* switch to SNFI mode */
+	err = regmap_write(as_ctrl->regmap_nfi, REG_SPI_NFI_SNF_NFI_CNFG,
+			   SPI_NFI_SPI_MODE);
+	if (err)
+		return err;
+
+	/* Enable DMA */
+	return regmap_update_bits(as_ctrl->regmap_nfi, REG_SPI_NFI_INTR_EN,
+				  SPI_NFI_ALL_IRQ_EN, SPI_NFI_AHB_DONE_EN);
+}
+
+static int airoha_snand_nfi_config(struct airoha_snand_ctrl *as_ctrl)
+{
+	int err;
+	u32 val;
+
+	err = regmap_write(as_ctrl->regmap_nfi, REG_SPI_NFI_CON,
+			   SPI_NFI_FIFO_FLUSH | SPI_NFI_RST);
+	if (err)
+		return err;
+
+	/* auto FDM */
+	err = regmap_clear_bits(as_ctrl->regmap_nfi, REG_SPI_NFI_CNFG,
+				SPI_NFI_AUTO_FDM_EN);
+	if (err)
+		return err;
+
+	/* HW ECC */
+	err = regmap_clear_bits(as_ctrl->regmap_nfi, REG_SPI_NFI_CNFG,
+				SPI_NFI_HW_ECC_EN);
+	if (err)
+		return err;
+
+	/* DMA Burst */
+	err = regmap_set_bits(as_ctrl->regmap_nfi, REG_SPI_NFI_CNFG,
+			      SPI_NFI_DMA_BURST_EN);
+	if (err)
+		return err;
+
+	/* page format */
+	switch (as_ctrl->nfi_cfg.spare_size) {
+	case 26:
+		val = FIELD_PREP(SPI_NFI_SPARE_SIZE, 0x1);
+		break;
+	case 27:
+		val = FIELD_PREP(SPI_NFI_SPARE_SIZE, 0x2);
+		break;
+	case 28:
+		val = FIELD_PREP(SPI_NFI_SPARE_SIZE, 0x3);
+		break;
+	default:
+		val = FIELD_PREP(SPI_NFI_SPARE_SIZE, 0x0);
+		break;
+	}
+
+	err = regmap_update_bits(as_ctrl->regmap_nfi, REG_SPI_NFI_PAGEFMT,
+				 SPI_NFI_SPARE_SIZE, val);
+	if (err)
+		return err;
+
+	switch (as_ctrl->nfi_cfg.page_size) {
+	case 2048:
+		val = FIELD_PREP(SPI_NFI_PAGE_SIZE, 0x1);
+		break;
+	case 4096:
+		val = FIELD_PREP(SPI_NFI_PAGE_SIZE, 0x2);
+		break;
+	default:
+		val = FIELD_PREP(SPI_NFI_PAGE_SIZE, 0x0);
+		break;
+	}
+
+	err = regmap_update_bits(as_ctrl->regmap_nfi, REG_SPI_NFI_PAGEFMT,
+				 SPI_NFI_PAGE_SIZE, val);
+	if (err)
+		return err;
+
+	/* sec num */
+	val = FIELD_PREP(SPI_NFI_SEC_NUM, as_ctrl->nfi_cfg.sec_num);
+	err = regmap_update_bits(as_ctrl->regmap_nfi, REG_SPI_NFI_CON,
+				 SPI_NFI_SEC_NUM, val);
+	if (err)
+		return err;
+
+	/* enable cust sec size */
+	err = regmap_set_bits(as_ctrl->regmap_nfi, REG_SPI_NFI_SECCUS_SIZE,
+			      SPI_NFI_CUS_SEC_SIZE_EN);
+	if (err)
+		return err;
+
+	/* set cust sec size */
+	val = FIELD_PREP(SPI_NFI_CUS_SEC_SIZE, as_ctrl->nfi_cfg.sec_size);
+	return regmap_update_bits(as_ctrl->regmap_nfi,
+				  REG_SPI_NFI_SECCUS_SIZE,
+				  SPI_NFI_CUS_SEC_SIZE, val);
+}
+
+static bool airoha_snand_is_page_ops(const struct spi_mem_op *op)
+{
+	if (op->addr.nbytes != 2)
+		return false;
+
+	if (op->addr.buswidth != 1 && op->addr.buswidth != 2 &&
+	    op->addr.buswidth != 4)
+		return false;
+
+	switch (op->data.dir) {
+	case SPI_MEM_DATA_IN:
+		/* check dummy cycle first */
+		if (op->dummy.nbytes * BITS_PER_BYTE / op->dummy.buswidth > 0xf)
+			return false;
+
+		/* quad io / quad out */
+		if ((op->addr.buswidth == 4 || op->addr.buswidth == 1) &&
+		    op->data.buswidth == 4)
+			return true;
+
+		/* dual io / dual out */
+		if ((op->addr.buswidth == 2 || op->addr.buswidth == 1) &&
+		    op->data.buswidth == 2)
+			return true;
+
+		/* standard spi */
+		if (op->addr.buswidth == 1 && op->data.buswidth == 1)
+			return true;
+		break;
+	case SPI_MEM_DATA_OUT:
+		/* check dummy cycle first */
+		if (op->dummy.nbytes)
+			return false;
+
+		/* program load quad out */
+		if (op->addr.buswidth == 1 && op->data.buswidth == 4)
+			return true;
+
+		/* standard spi */
+		if (op->addr.buswidth == 1 && op->data.buswidth == 1)
+			return true;
+	default:
+		break;
+	}
+
+	return false;
+}
+
+static int airoha_snand_adjust_op_size(struct spi_mem *mem,
+				       struct spi_mem_op *op)
+{
+	struct airoha_snand_ctrl *as_ctrl;
+	size_t len;
+
+	as_ctrl = spi_controller_get_devdata(mem->spi->controller);
+	if (airoha_snand_is_page_ops(op)) {
+		len = as_ctrl->nfi_cfg.sec_size;
+		len += as_ctrl->nfi_cfg.spare_size;
+		len *= as_ctrl->nfi_cfg.sec_num;
+		op->data.nbytes = min_t(size_t, op->data.nbytes, len);
+	} else {
+		len = 1 + op->addr.nbytes + op->dummy.nbytes;
+		if (len >= 160)
+			return -EOPNOTSUPP;
+
+		op->data.nbytes = min_t(size_t, op->data.nbytes, 160 - len);
+	}
+
+	return 0;
+}
+
+static bool airoha_snand_supports_op(struct spi_mem *mem,
+				     const struct spi_mem_op *op)
+{
+	if (!spi_mem_default_supports_op(mem, op))
+		return false;
+
+	if (op->cmd.buswidth != 1)
+		return false;
+
+	if (airoha_snand_is_page_ops(op))
+		return true;
+
+	return (!op->addr.nbytes || op->addr.buswidth == 1) &&
+	       (!op->dummy.nbytes || op->dummy.buswidth == 1) &&
+	       (!op->data.nbytes || op->data.buswidth == 1);
+}
+
+static int airoha_snand_dirmap_create(struct spi_mem_dirmap_desc *desc)
+{
+	struct airoha_snand_dev *as_dev = spi_get_ctldata(desc->mem->spi);
+
+	if (!as_dev->txrx_buf)
+		return -EINVAL;
+
+	if (desc->info.offset + desc->info.length > U32_MAX)
+		return -EINVAL;
+
+	if (!airoha_snand_supports_op(desc->mem, &desc->info.op_tmpl))
+		return -EOPNOTSUPP;
+
+	return 0;
+}
+
+static ssize_t airoha_snand_dirmap_read(struct spi_mem_dirmap_desc *desc,
+					u64 offs, size_t len, void *buf)
+{
+	struct spi_device *spi = desc->mem->spi;
+	struct airoha_snand_dev *as_dev = spi_get_ctldata(spi);
+	struct spi_mem_op *op = &desc->info.op_tmpl;
+	struct airoha_snand_ctrl *as_ctrl;
+	u32 val, rd_mode;
+	int err;
+
+	if (!as_dev->data_need_update)
+		return len;
+
+	as_dev->data_need_update = false;
+
+	switch (op->cmd.opcode) {
+	case SPI_NAND_OP_READ_FROM_CACHE_DUAL:
+		rd_mode = 1;
+		break;
+	case SPI_NAND_OP_READ_FROM_CACHE_QUAD:
+		rd_mode = 2;
+		break;
+	default:
+		rd_mode = 0;
+		break;
+	}
+
+	as_ctrl = spi_controller_get_devdata(spi->controller);
+	err = airoha_snand_set_mode(as_ctrl, SPI_MODE_DMA);
+	if (err < 0)
+		return err;
+
+	err = airoha_snand_nfi_config(as_ctrl);
+	if (err)
+		return err;
+
+	dma_sync_single_for_device(as_ctrl->dev, as_dev->dma_addr,
+				   as_dev->buf_len, DMA_BIDIRECTIONAL);
+	mb();
+
+	/* set dma addr */
+	err = regmap_write(as_ctrl->regmap_nfi, REG_SPI_NFI_STRADDR,
+			   as_dev->dma_addr);
+	if (err)
+		return err;
+
+	/* set cust sec size */
+	val = as_ctrl->nfi_cfg.sec_size * as_ctrl->nfi_cfg.sec_num;
+	val = FIELD_PREP(SPI_NFI_READ_DATA_BYTE_NUM, val);
+	err = regmap_update_bits(as_ctrl->regmap_nfi,
+				 REG_SPI_NFI_SNF_MISC_CTL2,
+				 SPI_NFI_READ_DATA_BYTE_NUM, val);
+	if (err)
+		return err;
+
+	/* set read command */
+	err = regmap_write(as_ctrl->regmap_nfi, REG_SPI_NFI_RD_CTL2,
+			   op->cmd.opcode);
+	if (err)
+		return err;
+
+	/* set read mode */
+	err = regmap_write(as_ctrl->regmap_nfi, REG_SPI_NFI_SNF_MISC_CTL,
+			   FIELD_PREP(SPI_NFI_DATA_READ_WR_MODE, rd_mode));
+	if (err)
+		return err;
+
+	/* set read addr */
+	err = regmap_write(as_ctrl->regmap_nfi, REG_SPI_NFI_RD_CTL3, 0x0);
+	if (err)
+		return err;
+
+	/* set nfi read */
+	err = regmap_update_bits(as_ctrl->regmap_nfi, REG_SPI_NFI_CNFG,
+				 SPI_NFI_OPMODE,
+				 FIELD_PREP(SPI_NFI_OPMODE, 6));
+	if (err)
+		return err;
+
+	err = regmap_set_bits(as_ctrl->regmap_nfi, REG_SPI_NFI_CNFG,
+			      SPI_NFI_READ_MODE | SPI_NFI_DMA_MODE);
+	if (err)
+		return err;
+
+	err = regmap_write(as_ctrl->regmap_nfi, REG_SPI_NFI_CMD, 0x0);
+	if (err)
+		return err;
+
+	/* trigger dma start read */
+	err = regmap_clear_bits(as_ctrl->regmap_nfi, REG_SPI_NFI_CON,
+				SPI_NFI_RD_TRIG);
+	if (err)
+		return err;
+
+	err = regmap_set_bits(as_ctrl->regmap_nfi, REG_SPI_NFI_CON,
+			      SPI_NFI_RD_TRIG);
+	if (err)
+		return err;
+
+	err = regmap_read_poll_timeout(as_ctrl->regmap_nfi,
+				       REG_SPI_NFI_SNF_STA_CTL1, val,
+				       (val & SPI_NFI_READ_FROM_CACHE_DONE),
+				       0, USEC_PER_SEC);
+	if (err)
+		return err;
+
+	err = regmap_set_bits(as_ctrl->regmap_nfi, REG_SPI_NFI_SNF_STA_CTL1,
+			      SPI_NFI_READ_FROM_CACHE_DONE);
+	if (err)
+		return err;
+
+	err = regmap_read_poll_timeout(as_ctrl->regmap_nfi, REG_SPI_NFI_INTR,
+				       val, (val & SPI_NFI_AHB_DONE), 0,
+				       USEC_PER_SEC);
+	if (err)
+		return err;
+
+	/* DMA read need delay for data ready from controller to DRAM */
+	udelay(1);
+
+	dma_sync_single_for_cpu(as_ctrl->dev, as_dev->dma_addr,
+				as_dev->buf_len, DMA_BIDIRECTIONAL);
+	err = airoha_snand_set_mode(as_ctrl, SPI_MODE_MANUAL);
+	if (err < 0)
+		return err;
+
+	memcpy(buf, as_dev->txrx_buf + offs, len);
+
+	return len;
+}
+
+static ssize_t airoha_snand_dirmap_write(struct spi_mem_dirmap_desc *desc,
+					 u64 offs, size_t len, const void *buf)
+{
+	struct spi_device *spi = desc->mem->spi;
+	struct airoha_snand_dev *as_dev = spi_get_ctldata(spi);
+	struct spi_mem_op *op = &desc->info.op_tmpl;
+	struct airoha_snand_ctrl *as_ctrl;
+	u32 wr_mode, val;
+	int err;
+
+	as_ctrl = spi_controller_get_devdata(spi->controller);
+	err = airoha_snand_set_mode(as_ctrl, SPI_MODE_MANUAL);
+	if (err < 0)
+		return err;
+
+	dma_sync_single_for_cpu(as_ctrl->dev, as_dev->dma_addr,
+				as_dev->buf_len, DMA_BIDIRECTIONAL);
+	memcpy(as_dev->txrx_buf + offs, buf, len);
+	dma_sync_single_for_device(as_ctrl->dev, as_dev->dma_addr,
+				   as_dev->buf_len, DMA_BIDIRECTIONAL);
+	mb();
+
+	err = airoha_snand_set_mode(as_ctrl, SPI_MODE_DMA);
+	if (err < 0)
+		return err;
+
+	err = airoha_snand_nfi_config(as_ctrl);
+	if (err)
+		return err;
+
+	if (op->cmd.opcode == SPI_NAND_OP_PROGRAM_LOAD_QUAD ||
+	    op->cmd.opcode == SPI_NAND_OP_PROGRAM_LOAD_RAMDON_QUAD)
+		wr_mode = 2;
+	else
+		wr_mode = 0;
+
+	err = regmap_write(as_ctrl->regmap_nfi, REG_SPI_NFI_STRADDR,
+			   as_dev->dma_addr);
+	if (err)
+		return err;
+
+	val = as_ctrl->nfi_cfg.sec_size * as_ctrl->nfi_cfg.sec_num;
+	val = FIELD_PREP(SPI_NFI_PROG_LOAD_BYTE_NUM, val);
+	err = regmap_update_bits(as_ctrl->regmap_nfi,
+				 REG_SPI_NFI_SNF_MISC_CTL2,
+				 SPI_NFI_PROG_LOAD_BYTE_NUM, val);
+	if (err)
+		return err;
+
+	err = regmap_write(as_ctrl->regmap_nfi, REG_SPI_NFI_PG_CTL1,
+			   FIELD_PREP(SPI_NFI_PG_LOAD_CMD,
+				      op->cmd.opcode));
+	if (err)
+		return err;
+
+	err = regmap_write(as_ctrl->regmap_nfi, REG_SPI_NFI_SNF_MISC_CTL,
+			   FIELD_PREP(SPI_NFI_DATA_READ_WR_MODE, wr_mode));
+	if (err)
+		return err;
+
+	err = regmap_write(as_ctrl->regmap_nfi, REG_SPI_NFI_PG_CTL2, 0x0);
+	if (err)
+		return err;
+
+	err = regmap_clear_bits(as_ctrl->regmap_nfi, REG_SPI_NFI_CNFG,
+				SPI_NFI_READ_MODE);
+	if (err)
+		return err;
+
+	err = regmap_update_bits(as_ctrl->regmap_nfi, REG_SPI_NFI_CNFG,
+				 SPI_NFI_OPMODE,
+				 FIELD_PREP(SPI_NFI_OPMODE, 3));
+	if (err)
+		return err;
+
+	err = regmap_set_bits(as_ctrl->regmap_nfi, REG_SPI_NFI_CNFG,
+			      SPI_NFI_DMA_MODE);
+	if (err)
+		return err;
+
+	err = regmap_write(as_ctrl->regmap_nfi, REG_SPI_NFI_CMD, 0x80);
+	if (err)
+		return err;
+
+	err = regmap_clear_bits(as_ctrl->regmap_nfi, REG_SPI_NFI_CON,
+				SPI_NFI_WR_TRIG);
+	if (err)
+		return err;
+
+	err = regmap_set_bits(as_ctrl->regmap_nfi, REG_SPI_NFI_CON,
+			      SPI_NFI_WR_TRIG);
+	if (err)
+		return err;
+
+	err = regmap_read_poll_timeout(as_ctrl->regmap_nfi, REG_SPI_NFI_INTR,
+				       val, (val & SPI_NFI_AHB_DONE), 0,
+				       USEC_PER_SEC);
+	if (err)
+		return err;
+
+	err = regmap_read_poll_timeout(as_ctrl->regmap_nfi,
+				       REG_SPI_NFI_SNF_STA_CTL1, val,
+				       (val & SPI_NFI_LOAD_TO_CACHE_DONE),
+				       0, USEC_PER_SEC);
+	if (err)
+		return err;
+
+	err = regmap_set_bits(as_ctrl->regmap_nfi, REG_SPI_NFI_SNF_STA_CTL1,
+			      SPI_NFI_LOAD_TO_CACHE_DONE);
+	if (err)
+		return err;
+
+	err = airoha_snand_set_mode(as_ctrl, SPI_MODE_MANUAL);
+	if (err < 0)
+		return err;
+
+	return len;
+}
+
+static int airoha_snand_exec_op(struct spi_mem *mem,
+				const struct spi_mem_op *op)
+{
+	struct airoha_snand_dev *as_dev = spi_get_ctldata(mem->spi);
+	struct airoha_snand_ctrl *as_ctrl;
+	u8 data, opcode = op->cmd.opcode;
+	int i, err;
+
+	as_ctrl = spi_controller_get_devdata(mem->spi->controller);
+	if (opcode == SPI_NAND_OP_PROGRAM_EXECUTE &&
+	    op->addr.val == as_dev->cur_page_num) {
+		as_dev->data_need_update = true;
+	} else if (opcode == SPI_NAND_OP_PAGE_READ) {
+		if (!as_dev->data_need_update &&
+		    op->addr.val == as_dev->cur_page_num)
+			return 0;
+
+		as_dev->data_need_update = true;
+		as_dev->cur_page_num = op->addr.val;
+	}
+
+	/* switch to manual mode */
+	err = airoha_snand_set_mode(as_ctrl, SPI_MODE_MANUAL);
+	if (err < 0)
+		return err;
+
+	err = airoha_snand_set_cs(as_ctrl, SPI_CHIP_SEL_LOW);
+	if (err < 0)
+		return err;
+
+	/* opcode */
+	err = airoha_snand_write_data(as_ctrl, 0x8, &opcode, sizeof(opcode));
+	if (err)
+		return err;
+
+	/* addr part */
+	for (i = 0; i < op->addr.nbytes; i++) {
+		u8 cmd = opcode == SPI_NAND_OP_GET_FEATURE ? 0x11 : 0x8;
+
+		data = op->addr.val >> ((op->addr.nbytes - i - 1) * 8);
+		err = airoha_snand_write_data(as_ctrl, cmd, &data,
+					      sizeof(data));
+		if (err)
+			return err;
+	}
+
+	/* dummy */
+	for (i = 0; i < op->dummy.nbytes; i++) {
+		data = 0xff;
+		err = airoha_snand_write_data(as_ctrl, 0x8, &data,
+					      sizeof(data));
+		if (err)
+			return err;
+	}
+
+	/* data */
+	if (op->data.dir == SPI_MEM_DATA_IN) {
+		err = airoha_snand_read_data(as_ctrl, op->data.buf.in,
+					     op->data.nbytes);
+		if (err)
+			return err;
+	} else {
+		err = airoha_snand_write_data(as_ctrl, 0x8, op->data.buf.out,
+					      op->data.nbytes);
+		if (err)
+			return err;
+	}
+
+	return airoha_snand_set_cs(as_ctrl, SPI_CHIP_SEL_HIGH);
+}
+
+static const struct spi_controller_mem_ops airoha_snand_mem_ops = {
+	.adjust_op_size = airoha_snand_adjust_op_size,
+	.supports_op = airoha_snand_supports_op,
+	.exec_op = airoha_snand_exec_op,
+	.dirmap_create = airoha_snand_dirmap_create,
+	.dirmap_read = airoha_snand_dirmap_read,
+	.dirmap_write = airoha_snand_dirmap_write,
+};
+
+#define SPI_NAND_CACHE_SIZE	(4096 + 256)
+
+static int airoha_snand_setup(struct spi_device *spi)
+{
+	struct airoha_snand_dev *as_dev = spi_get_ctldata(spi);
+	struct airoha_snand_ctrl *as_ctrl;
+
+	as_dev = kzalloc(sizeof(*as_dev), GFP_KERNEL);
+	if (!as_dev)
+		return -ENOMEM;
+
+	spi_set_ctldata(spi, as_dev);
+	as_dev->data_need_update = true;
+
+	/* prepare device buffer */
+	as_dev->buf_len = SPI_NAND_CACHE_SIZE;
+	as_dev->txrx_buf = kzalloc(as_dev->buf_len, GFP_KERNEL);
+	if (!as_dev->txrx_buf)
+		goto error_dev_free;
+
+	as_ctrl = spi_controller_get_devdata(spi->controller);
+	as_dev->dma_addr = dma_map_single(as_ctrl->dev, as_dev->txrx_buf,
+					  as_dev->buf_len, DMA_BIDIRECTIONAL);
+	if (dma_mapping_error(as_ctrl->dev, as_dev->dma_addr))
+		goto error_buf_free;
+
+	return 0;
+
+error_buf_free:
+	kfree(as_dev->txrx_buf);
+error_dev_free:
+	kfree(as_dev);
+
+	return -EINVAL;
+}
+
+static void airoha_snand_cleanup(struct spi_device *spi)
+{
+	struct airoha_snand_dev *as_dev = spi_get_ctldata(spi);
+	struct airoha_snand_ctrl *as_ctrl;
+
+	as_ctrl = spi_controller_get_devdata(spi->controller);
+	dma_unmap_single(as_ctrl->dev, as_dev->dma_addr,
+			 as_dev->buf_len, DMA_BIDIRECTIONAL);
+	kfree(as_dev->txrx_buf);
+
+	spi_set_ctldata(spi, NULL);
+}
+
+static int airoha_snand_nfi_setup(struct airoha_snand_ctrl *as_ctrl)
+{
+	u32 val, sec_size, sec_num;
+	int err;
+
+	err = regmap_read(as_ctrl->regmap_nfi, REG_SPI_NFI_CON, &val);
+	if (err)
+		return err;
+
+	sec_num = FIELD_GET(SPI_NFI_SEC_NUM, val);
+
+	err = regmap_read(as_ctrl->regmap_nfi,
+			  REG_SPI_NFI_SECCUS_SIZE, &val);
+	if (err)
+		return err;
+
+	sec_size = FIELD_GET(SPI_NFI_CUS_SEC_SIZE, val);
+
+	/* init default value */
+	as_ctrl->nfi_cfg.sec_size = sec_size;
+	as_ctrl->nfi_cfg.sec_num = sec_num;
+	as_ctrl->nfi_cfg.page_size = rounddown(sec_size * sec_num, 1024);
+	as_ctrl->nfi_cfg.spare_size = 16;
+
+	err = airoha_snand_nfi_init(as_ctrl);
+	if (err)
+		return err;
+
+	return airoha_snand_nfi_config(as_ctrl);
+}
+
+static const struct regmap_config spi_ctrl_regmap_config = {
+	.name		= "ctrl",
+	.reg_bits	= 32,
+	.val_bits	= 32,
+	.reg_stride	= 4,
+	.max_register	= REG_SPI_CTRL_NFI2SPI_EN,
+};
+
+static const struct regmap_config spi_nfi_regmap_config = {
+	.name		= "nfi",
+	.reg_bits	= 32,
+	.val_bits	= 32,
+	.reg_stride	= 4,
+	.max_register	= REG_SPI_NFI_SNF_NFI_CNFG,
+};
+
+static const struct of_device_id airoha_snand_ids[] = {
+	{ .compatible	= "airoha,en7581-snand" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, airoha_snand_ids);
+
+static int airoha_snand_probe(struct platform_device *pdev)
+{
+	struct airoha_snand_ctrl *as_ctrl;
+	struct spi_controller *ctrl;
+	struct resource *res;
+	void __iomem *base;
+	int err;
+
+	ctrl = devm_spi_alloc_host(&pdev->dev, sizeof(*as_ctrl));
+	if (!ctrl)
+		return -ENOMEM;
+
+	as_ctrl = spi_controller_get_devdata(ctrl);
+	as_ctrl->dev = &pdev->dev;
+
+	base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	as_ctrl->regmap_ctrl = devm_regmap_init_mmio(&pdev->dev, base,
+						     &spi_ctrl_regmap_config);
+	if (IS_ERR(as_ctrl->regmap_ctrl)) {
+		dev_err(&pdev->dev, "failed to init spi ctrl regmap: %ld\n",
+			PTR_ERR(as_ctrl->regmap_ctrl));
+		return PTR_ERR(as_ctrl->regmap_ctrl);
+	}
+
+	base = devm_platform_get_and_ioremap_resource(pdev, 1, &res);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	as_ctrl->regmap_nfi = devm_regmap_init_mmio(&pdev->dev, base,
+						    &spi_nfi_regmap_config);
+	if (IS_ERR(as_ctrl->regmap_nfi)) {
+		dev_err(&pdev->dev, "failed to init spi nfi regmap: %ld\n",
+			PTR_ERR(as_ctrl->regmap_nfi));
+		return PTR_ERR(as_ctrl->regmap_nfi);
+	}
+
+	as_ctrl->spi_clk = devm_clk_get_enabled(&pdev->dev, "spi");
+	if (IS_ERR(as_ctrl->spi_clk)) {
+		dev_err(&pdev->dev, "unable to get spi clk");
+		return PTR_ERR(as_ctrl->spi_clk);
+	}
+
+	err = dma_set_mask(as_ctrl->dev, DMA_BIT_MASK(32));
+	if (err)
+		return err;
+
+	ctrl->num_chipselect = 2;
+	ctrl->mem_ops = &airoha_snand_mem_ops;
+	ctrl->bits_per_word_mask = SPI_BPW_MASK(8);
+	ctrl->mode_bits = SPI_RX_DUAL;
+	ctrl->dev.of_node = pdev->dev.of_node;
+	ctrl->setup = airoha_snand_setup;
+	ctrl->cleanup = airoha_snand_cleanup;
+
+	err = airoha_snand_nfi_setup(as_ctrl);
+	if (err)
+		return err;
+
+	return devm_spi_register_controller(&pdev->dev, ctrl);
+}
+
+static struct platform_driver airoha_snand_driver = {
+	.driver = {
+		.name = "airoha-spi",
+		.of_match_table = airoha_snand_ids,
+	},
+	.probe = airoha_snand_probe,
+};
+
+module_platform_driver(airoha_snand_driver);
+
+MODULE_DESCRIPTION("Airoha SPI-NAND Flash Controller Driver");
+MODULE_AUTHOR("Lorenzo Bianconi <lorenzo@kernel.org>");
+MODULE_AUTHOR("Ray Liu <ray.liu@airoha.com>");
+MODULE_LICENSE("GPL");