| Message ID | 20200510215744.21999-4-mchristi@redhat.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | target: add sysfs support | expand |
On 5/10/20 11:57 PM, Mike Christie wrote: > The drivers that emulate the initiator port id (loop, scsi vhost, xen scsiback) > do almost the extact same parsing when making their I_T_nexus. This adds a > helper that parses out the acl name and port name from the user buffer, so > these types of drivers drop prefixes like "naa." when they need to for the > SCSI SPC4 TransportID SAS address, but then keep it for the LIO ACL name. > > The next patches will then convert those drivers. > > Cc: Michael S. Tsirkin <mst@redhat.com> > Cc: Jason Wang <jasowang@redhat.com> > Cc: Paolo Bonzini <pbonzini@redhat.com> > Cc: Stefan Hajnoczi <stefanha@redhat.com> > Cc: Juergen Gross <jgross@suse.com> > Signed-off-by: Mike Christie <mchristi@redhat.com> > --- > drivers/target/target_core_fabric_lib.c | 73 +++++++++++++++++++++++++++++++++ > include/target/target_core_fabric.h | 2 + > 2 files changed, 75 insertions(+) > Reviewed-by: Hannes Reinecke <hare@suse.de> Cheers, Hannes
On 05/10/20 23:57, Mike Christie wrote: > The drivers that emulate the initiator port id (loop, scsi vhost, xen scsiback) > do almost the extact same parsing when making their I_T_nexus. This adds a > helper that parses out the acl name and port name from the user buffer, so > these types of drivers drop prefixes like "naa." when they need to for the > SCSI SPC4 TransportID SAS address, but then keep it for the LIO ACL name. > > The next patches will then convert those drivers. > > Cc: Michael S. Tsirkin <mst@redhat.com> > Cc: Jason Wang <jasowang@redhat.com> > Cc: Paolo Bonzini <pbonzini@redhat.com> > Cc: Stefan Hajnoczi <stefanha@redhat.com> > Cc: Juergen Gross <jgross@suse.com> > Signed-off-by: Mike Christie <mchristi@redhat.com> > --- > drivers/target/target_core_fabric_lib.c | 73 +++++++++++++++++++++++++++++++++ > include/target/target_core_fabric.h | 2 + > 2 files changed, 75 insertions(+) > > diff --git a/drivers/target/target_core_fabric_lib.c b/drivers/target/target_core_fabric_lib.c > index e89b3d8..81ed7d5 100644 > --- a/drivers/target/target_core_fabric_lib.c > +++ b/drivers/target/target_core_fabric_lib.c > @@ -423,6 +423,79 @@ const char *target_parse_pr_out_transport_id(struct se_portal_group *tpg, > return buf + offset; > } > > +/** > + * target_parse_emulated_name - parse TransportID and acl name from user buffer > + * @proto_id: SCSI protocol identifier > + * @user_buf: buffer with emualted name to extract acl and TransportID from > + * @acl_name: buffer to store se_node_acl name in > + * @max_name_len: len of acl_name buffer > + * @tpt_id_name: Pointer to the TransportID name will be stored here. > + */ > +int target_parse_emulated_name(u8 proto_id, const char *user_buf, > + unsigned char *acl_name, int max_name_len, > + unsigned char **tpt_id_name) > +{ > + int user_len = strlen(user_buf); > + char *proto_prefix, *name_start; > + > + if (user_len >= max_name_len) { > + pr_err("Emulated name: %s, exceeds max: %d\n", user_buf, > + max_name_len); > + return -EINVAL; > + } > + > + switch (proto_id) { > + case SCSI_PROTOCOL_SAS: > + proto_prefix = "naa."; > + break; > + case SCSI_PROTOCOL_FCP: > + proto_prefix = "fc."; > + break; > + case SCSI_PROTOCOL_ISCSI: > + proto_prefix = "iqn."; > + break; > + default: > + pr_err("Unsupported proto_id: 0x%02x\n", proto_id); > + return -EINVAL; > + } > + > + name_start = strstr(user_buf, proto_prefix); > + if (!name_start) { > + pr_err("Invalid emulated name %s. Must start with %s\n", > + user_buf, proto_prefix); > + return -EINVAL; > + } > + > + switch (proto_id) { > + case SCSI_PROTOCOL_SAS: > + sprintf(acl_name, name_start); > + break; > + case SCSI_PROTOCOL_FCP: > + sprintf(acl_name, &name_start[3]); /* Skip over "fc." */ > + break; Would it make sense to check acl_name for SAS and FCP according to the assumptions made in (sas|fc)_get_pr_transport_id() how the string should look like? - SAS: 8 hex digits - FC: 8 pairs of 2 hex digits separated by 7 colons For compatibility reasons 16 hex digits could be allowed alternatively for FC, if fc_get_pr_transport_id() is enhanced accordingly. > + case SCSI_PROTOCOL_ISCSI: > + sprintf(acl_name, name_start); > + break; > + } > + > + if (acl_name[user_len - 1] == '\n') > + acl_name[user_len - 1] = '\0'; > + > + if (proto_id == SCSI_PROTOCOL_SAS) { > + /* > + * target_setup_session will want the naa. prefix to match > + * the ACL name, but the t10 transport id only wants the > + * address. > + */ > + *tpt_id_name = acl_name + 4; > + } else { > + *tpt_id_name = acl_name; > + } > + > + return 0; > +} > +EXPORT_SYMBOL(target_parse_emulated_name); > + > struct t10_transport_id *target_create_transport_id(u8 proto, const char *name, > const char *session_id) > { > diff --git a/include/target/target_core_fabric.h b/include/target/target_core_fabric.h > index af1dd81..0113e1c 100644 > --- a/include/target/target_core_fabric.h > +++ b/include/target/target_core_fabric.h > @@ -125,6 +125,8 @@ struct target_core_fabric_ops { > int target_depend_item(struct config_item *item); > void target_undepend_item(struct config_item *item); > > +int target_parse_emulated_name(u8, const char *, unsigned char *, int, > + unsigned char **); > struct t10_transport_id *target_create_transport_id(u8, const char *, > const char *); > void target_free_transport_id(struct t10_transport_id *); >
On 5/11/20 1:22 PM, Bodo Stroesser wrote: > On 05/10/20 23:57, Mike Christie wrote: >> The drivers that emulate the initiator port id (loop, scsi vhost, xen >> scsiback) >> do almost the extact same parsing when making their I_T_nexus. This >> adds a >> helper that parses out the acl name and port name from the user >> buffer, so >> these types of drivers drop prefixes like "naa." when they need to for >> the >> SCSI SPC4 TransportID SAS address, but then keep it for the LIO ACL name. >> >> The next patches will then convert those drivers. >> >> Cc: Michael S. Tsirkin <mst@redhat.com> >> Cc: Jason Wang <jasowang@redhat.com> >> Cc: Paolo Bonzini <pbonzini@redhat.com> >> Cc: Stefan Hajnoczi <stefanha@redhat.com> >> Cc: Juergen Gross <jgross@suse.com> >> Signed-off-by: Mike Christie <mchristi@redhat.com> >> --- >> drivers/target/target_core_fabric_lib.c | 73 >> +++++++++++++++++++++++++++++++++ >> include/target/target_core_fabric.h | 2 + >> 2 files changed, 75 insertions(+) >> >> diff --git a/drivers/target/target_core_fabric_lib.c >> b/drivers/target/target_core_fabric_lib.c >> index e89b3d8..81ed7d5 100644 >> --- a/drivers/target/target_core_fabric_lib.c >> +++ b/drivers/target/target_core_fabric_lib.c >> @@ -423,6 +423,79 @@ const char >> *target_parse_pr_out_transport_id(struct se_portal_group *tpg, >> return buf + offset; >> } >> +/** >> + * target_parse_emulated_name - parse TransportID and acl name from >> user buffer >> + * @proto_id: SCSI protocol identifier >> + * @user_buf: buffer with emualted name to extract acl and >> TransportID from >> + * @acl_name: buffer to store se_node_acl name in >> + * @max_name_len: len of acl_name buffer >> + * @tpt_id_name: Pointer to the TransportID name will be stored here. >> + */ >> +int target_parse_emulated_name(u8 proto_id, const char *user_buf, >> + unsigned char *acl_name, int max_name_len, >> + unsigned char **tpt_id_name) >> +{ >> + int user_len = strlen(user_buf); >> + char *proto_prefix, *name_start; >> + >> + if (user_len >= max_name_len) { >> + pr_err("Emulated name: %s, exceeds max: %d\n", user_buf, >> + max_name_len); >> + return -EINVAL; >> + } >> + >> + switch (proto_id) { >> + case SCSI_PROTOCOL_SAS: >> + proto_prefix = "naa."; >> + break; >> + case SCSI_PROTOCOL_FCP: >> + proto_prefix = "fc."; >> + break; >> + case SCSI_PROTOCOL_ISCSI: >> + proto_prefix = "iqn."; >> + break; >> + default: >> + pr_err("Unsupported proto_id: 0x%02x\n", proto_id); >> + return -EINVAL; >> + } >> + >> + name_start = strstr(user_buf, proto_prefix); >> + if (!name_start) { >> + pr_err("Invalid emulated name %s. Must start with %s\n", >> + user_buf, proto_prefix); >> + return -EINVAL; >> + } >> + >> + switch (proto_id) { >> + case SCSI_PROTOCOL_SAS: >> + sprintf(acl_name, name_start); >> + break; >> + case SCSI_PROTOCOL_FCP: >> + sprintf(acl_name, &name_start[3]); /* Skip over "fc." */ >> + break; > > Would it make sense to check acl_name for SAS and FCP according to > the assumptions made in (sas|fc)_get_pr_transport_id() how the > string should look like? > > - SAS: 8 hex digits > - FC: 8 pairs of 2 hex digits separated by 7 colons > > For compatibility reasons 16 hex digits could be allowed alternatively > for FC, if fc_get_pr_transport_id() is enhanced accordingly In general I would say yes. One hiccup I hit is that other than checking the prefix we have not been validating names. So we could have existing setups with completely bogus names like "naa.iworkbutamwrong", and if the user has never done workloads that use PRs then it has worked fine. If we start to validate the name here, how do we handle a failure? I took the easy route and kept the existing behavior. For new functionality like if a userspace daemon detects the bad value in sysfs then I think it can decide to report a failover for that new functionality and we would be ok. In the long run though code path wise, I am going to replace the nacl use in the PR code with the transport ID, so we won't have multiple places doing stuff like "/* Skip over 'naa. prefix */" . I am trying to do that work in the PR related patchset and keep this focused on the sysfs part.
On 5/10/20 2:57 PM, Mike Christie wrote: > The drivers that emulate the initiator port id (loop, scsi vhost, xen scsiback) > do almost the extact same parsing when making their I_T_nexus. This adds a > helper that parses out the acl name and port name from the user buffer, so > these types of drivers drop prefixes like "naa." when they need to for the > SCSI SPC4 TransportID SAS address, but then keep it for the LIO ACL name. > > The next patches will then convert those drivers. > > Cc: Michael S. Tsirkin <mst@redhat.com> > Cc: Jason Wang <jasowang@redhat.com> > Cc: Paolo Bonzini <pbonzini@redhat.com> > Cc: Stefan Hajnoczi <stefanha@redhat.com> > Cc: Juergen Gross <jgross@suse.com> > Signed-off-by: Mike Christie <mchristi@redhat.com> > --- > drivers/target/target_core_fabric_lib.c | 73 +++++++++++++++++++++++++++++++++ > include/target/target_core_fabric.h | 2 + > 2 files changed, 75 insertions(+) > ... Reviewed-by: Lee Duncan <lduncan@suse.com>
diff --git a/drivers/target/target_core_fabric_lib.c b/drivers/target/target_core_fabric_lib.c index e89b3d8..81ed7d5 100644 --- a/drivers/target/target_core_fabric_lib.c +++ b/drivers/target/target_core_fabric_lib.c @@ -423,6 +423,79 @@ const char *target_parse_pr_out_transport_id(struct se_portal_group *tpg, return buf + offset; } +/** + * target_parse_emulated_name - parse TransportID and acl name from user buffer + * @proto_id: SCSI protocol identifier + * @user_buf: buffer with emualted name to extract acl and TransportID from + * @acl_name: buffer to store se_node_acl name in + * @max_name_len: len of acl_name buffer + * @tpt_id_name: Pointer to the TransportID name will be stored here. + */ +int target_parse_emulated_name(u8 proto_id, const char *user_buf, + unsigned char *acl_name, int max_name_len, + unsigned char **tpt_id_name) +{ + int user_len = strlen(user_buf); + char *proto_prefix, *name_start; + + if (user_len >= max_name_len) { + pr_err("Emulated name: %s, exceeds max: %d\n", user_buf, + max_name_len); + return -EINVAL; + } + + switch (proto_id) { + case SCSI_PROTOCOL_SAS: + proto_prefix = "naa."; + break; + case SCSI_PROTOCOL_FCP: + proto_prefix = "fc."; + break; + case SCSI_PROTOCOL_ISCSI: + proto_prefix = "iqn."; + break; + default: + pr_err("Unsupported proto_id: 0x%02x\n", proto_id); + return -EINVAL; + } + + name_start = strstr(user_buf, proto_prefix); + if (!name_start) { + pr_err("Invalid emulated name %s. Must start with %s\n", + user_buf, proto_prefix); + return -EINVAL; + } + + switch (proto_id) { + case SCSI_PROTOCOL_SAS: + sprintf(acl_name, name_start); + break; + case SCSI_PROTOCOL_FCP: + sprintf(acl_name, &name_start[3]); /* Skip over "fc." */ + break; + case SCSI_PROTOCOL_ISCSI: + sprintf(acl_name, name_start); + break; + } + + if (acl_name[user_len - 1] == '\n') + acl_name[user_len - 1] = '\0'; + + if (proto_id == SCSI_PROTOCOL_SAS) { + /* + * target_setup_session will want the naa. prefix to match + * the ACL name, but the t10 transport id only wants the + * address. + */ + *tpt_id_name = acl_name + 4; + } else { + *tpt_id_name = acl_name; + } + + return 0; +} +EXPORT_SYMBOL(target_parse_emulated_name); + struct t10_transport_id *target_create_transport_id(u8 proto, const char *name, const char *session_id) { diff --git a/include/target/target_core_fabric.h b/include/target/target_core_fabric.h index af1dd81..0113e1c 100644 --- a/include/target/target_core_fabric.h +++ b/include/target/target_core_fabric.h @@ -125,6 +125,8 @@ struct target_core_fabric_ops { int target_depend_item(struct config_item *item); void target_undepend_item(struct config_item *item); +int target_parse_emulated_name(u8, const char *, unsigned char *, int, + unsigned char **); struct t10_transport_id *target_create_transport_id(u8, const char *, const char *); void target_free_transport_id(struct t10_transport_id *);
The drivers that emulate the initiator port id (loop, scsi vhost, xen scsiback) do almost the extact same parsing when making their I_T_nexus. This adds a helper that parses out the acl name and port name from the user buffer, so these types of drivers drop prefixes like "naa." when they need to for the SCSI SPC4 TransportID SAS address, but then keep it for the LIO ACL name. The next patches will then convert those drivers. Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Cc: Juergen Gross <jgross@suse.com> Signed-off-by: Mike Christie <mchristi@redhat.com> --- drivers/target/target_core_fabric_lib.c | 73 +++++++++++++++++++++++++++++++++ include/target/target_core_fabric.h | 2 + 2 files changed, 75 insertions(+)