| Message ID | 20210515070315.215801-1-shinichiro.kawasaki@wdc.com (mailing list archive) |
|---|---|
| State | Accepted |
| Commit | 70ca3c57ff914113f681e657634f7fbfa68e1ad1 |
| Headers | show |
| Series | [v2] scsi: target: Avoid smp_processor_id() in preemptible code | expand |
On 5/15/21 2:03 AM, Shin'ichiro Kawasaki wrote: > The BUG message "BUG: using smp_processor_id() in preemptible [00000000] > code" was observed for TCMU devices with kernel config DEBUG_PREEMPT. > > The message was observed when blktests block/005 was run on TCMU devices > with fileio backend or user:zbc backend [1]. The commit 1130b499b4a7 > ("scsi: target: tcm_loop: Use LIO wq cmd submission helper") triggered > the symptom. The commit modified work queue to handle commands and > changed 'current->nr_cpu_allowed' at smp_processor_id() call. > > The message was also observed at system shutdown when TCMU devices were > not cleaned up [2]. The function smp_processor_id() was called in SCSI > host work queue for abort handling, and triggered the BUG message. This > symptom was observed regardless of the commit 1130b499b4a7 ("scsi: > target: tcm_loop: Use LIO wq cmd submission helper"). > > To avoid the preemptible code check at smp_processor_id(), get CPU ID > with raw_smp_processor_id() instead. The CPU ID is used for performance > improvement then thread move to other CPU will not affect the code. > > [1] > > [ 56.468103] run blktests block/005 at 2021-05-12 14:16:38 > [ 57.369473] check_preemption_disabled: 85 callbacks suppressed > [ 57.369480] BUG: using smp_processor_id() in preemptible [00000000] code: fio/1511 > [ 57.369506] BUG: using smp_processor_id() in preemptible [00000000] code: fio/1510 > [ 57.369512] BUG: using smp_processor_id() in preemptible [00000000] code: fio/1506 > [ 57.369552] caller is __target_init_cmd+0x157/0x170 [target_core_mod] > [ 57.369606] CPU: 4 PID: 1506 Comm: fio Not tainted 5.13.0-rc1+ #34 > [ 57.369613] Hardware name: System manufacturer System Product Name/PRIME Z270-A, BIOS 1302 03/15/2018 > [ 57.369617] Call Trace: > [ 57.369621] BUG: using smp_processor_id() in preemptible [00000000] code: fio/1507 > [ 57.369628] dump_stack+0x6d/0x89 > [ 57.369642] check_preemption_disabled+0xc8/0xd0 > [ 57.369628] caller is __target_init_cmd+0x157/0x170 [target_core_mod] > [ 57.369655] __target_init_cmd+0x157/0x170 [target_core_mod] > [ 57.369695] target_init_cmd+0x76/0x90 [target_core_mod] > [ 57.369732] tcm_loop_queuecommand+0x109/0x210 [tcm_loop] > [ 57.369744] scsi_queue_rq+0x38e/0xc40 > [ 57.369761] __blk_mq_try_issue_directly+0x109/0x1c0 > [ 57.369779] blk_mq_try_issue_directly+0x43/0x90 > [ 57.369790] blk_mq_submit_bio+0x4e5/0x5d0 > [ 57.369812] submit_bio_noacct+0x46e/0x4e0 > [ 57.369830] __blkdev_direct_IO_simple+0x1a3/0x2d0 > [ 57.369859] ? set_init_blocksize.isra.0+0x60/0x60 > [ 57.369880] generic_file_read_iter+0x89/0x160 > [ 57.369898] blkdev_read_iter+0x44/0x60 > [ 57.369906] new_sync_read+0x102/0x170 > [ 57.369929] vfs_read+0xd4/0x160 > [ 57.369941] __x64_sys_pread64+0x6e/0xa0 > [ 57.369946] ? lockdep_hardirqs_on+0x79/0x100 > [ 57.369958] do_syscall_64+0x3a/0x70 > [ 57.369965] entry_SYSCALL_64_after_hwframe+0x44/0xae > [ 57.369973] RIP: 0033:0x7f7ed4c1399f > [ 57.369979] Code: 08 89 3c 24 48 89 4c 24 18 e8 7d f3 ff ff 4c 8b 54 24 18 48 8b 54 24 10 41 89 c0 48 8b 74 24 08 8b 3c 24 b8 11 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 31 44 89 c7 48 89 04 24 e8 cd f3 ff ff 48 8b > [ 57.369983] RSP: 002b:00007ffd7918c580 EFLAGS: 00000293 ORIG_RAX: 0000000000000011 > [ 57.369990] RAX: ffffffffffffffda RBX: 00000000015b4540 RCX: 00007f7ed4c1399f > [ 57.369993] RDX: 0000000000001000 RSI: 00000000015de000 RDI: 0000000000000009 > [ 57.369996] RBP: 00000000015b4540 R08: 0000000000000000 R09: 0000000000000001 > [ 57.369999] R10: 0000000000e5c000 R11: 0000000000000293 R12: 00007f7eb5269a70 > [ 57.370002] R13: 0000000000000000 R14: 0000000000001000 R15: 00000000015b4568 > [ 57.370031] CPU: 7 PID: 1507 Comm: fio Not tainted 5.13.0-rc1+ #34 > [ 57.370036] Hardware name: System manufacturer System Product Name/PRIME Z270-A, BIOS 1302 03/15/2018 > [ 57.370039] Call Trace: > [ 57.370045] dump_stack+0x6d/0x89 > [ 57.370056] check_preemption_disabled+0xc8/0xd0 > [ 57.370068] __target_init_cmd+0x157/0x170 [target_core_mod] > [ 57.370121] target_init_cmd+0x76/0x90 [target_core_mod] > [ 57.370178] tcm_loop_queuecommand+0x109/0x210 [tcm_loop] > [ 57.370197] scsi_queue_rq+0x38e/0xc40 > [ 57.370224] __blk_mq_try_issue_directly+0x109/0x1c0 > ... > > [2] > > [ 117.458597] BUG: using smp_processor_id() in preemptible [00000000] code: kworker/u16:8 > [ 117.467279] caller is __target_init_cmd+0x157/0x170 [target_core_mod] > [ 117.473893] CPU: 1 PID: 418 Comm: kworker/u16:6 Not tainted 5.13.0-rc1+ #34 > [ 117.481150] Hardware name: System manufacturer System Product Name/PRIME Z270-A, BIOS 8 > [ 117.481153] Workqueue: scsi_tmf_7 scmd_eh_abort_handler > [ 117.481156] Call Trace: > [ 117.481158] dump_stack+0x6d/0x89 > [ 117.481162] check_preemption_disabled+0xc8/0xd0 > [ 117.512575] target_submit_tmr+0x41/0x150 [target_core_mod] > [ 117.519705] tcm_loop_issue_tmr+0xa7/0x100 [tcm_loop] > [ 117.524913] tcm_loop_abort_task+0x43/0x60 [tcm_loop] > [ 117.530137] scmd_eh_abort_handler+0x7b/0x230 > [ 117.534681] process_one_work+0x268/0x580 > [ 117.538862] worker_thread+0x55/0x3b0 > [ 117.542652] ? process_one_work+0x580/0x580 > [ 117.548351] kthread+0x143/0x160 > [ 117.551675] ? kthread_create_worker_on_cpu+0x40/0x40 > [ 117.556873] ret_from_fork+0x1f/0x30 > > Fixes: 1526d9f10c61 ("scsi: target: Make state_list per CPU") > Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> > Cc: stable@vger.kernel.org # v5.11+ > --- > Changes from v1: > * Used raw_smp_processor_id() instead of get_cpu() and put_cpu() > > drivers/target/target_core_transport.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c > index 8fbfe75c5744..05d7ffd59df6 100644 > --- a/drivers/target/target_core_transport.c > +++ b/drivers/target/target_core_transport.c > @@ -1416,7 +1416,7 @@ void __target_init_cmd( > cmd->orig_fe_lun = unpacked_lun; > > if (!(cmd->se_cmd_flags & SCF_USE_CPUID)) > - cmd->cpuid = smp_processor_id(); > + cmd->cpuid = raw_smp_processor_id(); > > cmd->state_active = false; > } > Reviewed-by: Mike Christie <michael.christie@oracle.com>
On Sat, 15 May 2021 16:03:15 +0900, Shin'ichiro Kawasaki wrote: > The BUG message "BUG: using smp_processor_id() in preemptible [00000000] > code" was observed for TCMU devices with kernel config DEBUG_PREEMPT. > > The message was observed when blktests block/005 was run on TCMU devices > with fileio backend or user:zbc backend [1]. The commit 1130b499b4a7 > ("scsi: target: tcm_loop: Use LIO wq cmd submission helper") triggered > the symptom. The commit modified work queue to handle commands and > changed 'current->nr_cpu_allowed' at smp_processor_id() call. > > [...] Applied to 5.13/scsi-fixes, thanks! [1/1] scsi: target: Avoid smp_processor_id() in preemptible code https://git.kernel.org/mkp/scsi/c/70ca3c57ff91
diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 8fbfe75c5744..05d7ffd59df6 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -1416,7 +1416,7 @@ void __target_init_cmd( cmd->orig_fe_lun = unpacked_lun; if (!(cmd->se_cmd_flags & SCF_USE_CPUID)) - cmd->cpuid = smp_processor_id(); + cmd->cpuid = raw_smp_processor_id(); cmd->state_active = false; }
The BUG message "BUG: using smp_processor_id() in preemptible [00000000] code" was observed for TCMU devices with kernel config DEBUG_PREEMPT. The message was observed when blktests block/005 was run on TCMU devices with fileio backend or user:zbc backend [1]. The commit 1130b499b4a7 ("scsi: target: tcm_loop: Use LIO wq cmd submission helper") triggered the symptom. The commit modified work queue to handle commands and changed 'current->nr_cpu_allowed' at smp_processor_id() call. The message was also observed at system shutdown when TCMU devices were not cleaned up [2]. The function smp_processor_id() was called in SCSI host work queue for abort handling, and triggered the BUG message. This symptom was observed regardless of the commit 1130b499b4a7 ("scsi: target: tcm_loop: Use LIO wq cmd submission helper"). To avoid the preemptible code check at smp_processor_id(), get CPU ID with raw_smp_processor_id() instead. The CPU ID is used for performance improvement then thread move to other CPU will not affect the code. [1] [ 56.468103] run blktests block/005 at 2021-05-12 14:16:38 [ 57.369473] check_preemption_disabled: 85 callbacks suppressed [ 57.369480] BUG: using smp_processor_id() in preemptible [00000000] code: fio/1511 [ 57.369506] BUG: using smp_processor_id() in preemptible [00000000] code: fio/1510 [ 57.369512] BUG: using smp_processor_id() in preemptible [00000000] code: fio/1506 [ 57.369552] caller is __target_init_cmd+0x157/0x170 [target_core_mod] [ 57.369606] CPU: 4 PID: 1506 Comm: fio Not tainted 5.13.0-rc1+ #34 [ 57.369613] Hardware name: System manufacturer System Product Name/PRIME Z270-A, BIOS 1302 03/15/2018 [ 57.369617] Call Trace: [ 57.369621] BUG: using smp_processor_id() in preemptible [00000000] code: fio/1507 [ 57.369628] dump_stack+0x6d/0x89 [ 57.369642] check_preemption_disabled+0xc8/0xd0 [ 57.369628] caller is __target_init_cmd+0x157/0x170 [target_core_mod] [ 57.369655] __target_init_cmd+0x157/0x170 [target_core_mod] [ 57.369695] target_init_cmd+0x76/0x90 [target_core_mod] [ 57.369732] tcm_loop_queuecommand+0x109/0x210 [tcm_loop] [ 57.369744] scsi_queue_rq+0x38e/0xc40 [ 57.369761] __blk_mq_try_issue_directly+0x109/0x1c0 [ 57.369779] blk_mq_try_issue_directly+0x43/0x90 [ 57.369790] blk_mq_submit_bio+0x4e5/0x5d0 [ 57.369812] submit_bio_noacct+0x46e/0x4e0 [ 57.369830] __blkdev_direct_IO_simple+0x1a3/0x2d0 [ 57.369859] ? set_init_blocksize.isra.0+0x60/0x60 [ 57.369880] generic_file_read_iter+0x89/0x160 [ 57.369898] blkdev_read_iter+0x44/0x60 [ 57.369906] new_sync_read+0x102/0x170 [ 57.369929] vfs_read+0xd4/0x160 [ 57.369941] __x64_sys_pread64+0x6e/0xa0 [ 57.369946] ? lockdep_hardirqs_on+0x79/0x100 [ 57.369958] do_syscall_64+0x3a/0x70 [ 57.369965] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 57.369973] RIP: 0033:0x7f7ed4c1399f [ 57.369979] Code: 08 89 3c 24 48 89 4c 24 18 e8 7d f3 ff ff 4c 8b 54 24 18 48 8b 54 24 10 41 89 c0 48 8b 74 24 08 8b 3c 24 b8 11 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 31 44 89 c7 48 89 04 24 e8 cd f3 ff ff 48 8b [ 57.369983] RSP: 002b:00007ffd7918c580 EFLAGS: 00000293 ORIG_RAX: 0000000000000011 [ 57.369990] RAX: ffffffffffffffda RBX: 00000000015b4540 RCX: 00007f7ed4c1399f [ 57.369993] RDX: 0000000000001000 RSI: 00000000015de000 RDI: 0000000000000009 [ 57.369996] RBP: 00000000015b4540 R08: 0000000000000000 R09: 0000000000000001 [ 57.369999] R10: 0000000000e5c000 R11: 0000000000000293 R12: 00007f7eb5269a70 [ 57.370002] R13: 0000000000000000 R14: 0000000000001000 R15: 00000000015b4568 [ 57.370031] CPU: 7 PID: 1507 Comm: fio Not tainted 5.13.0-rc1+ #34 [ 57.370036] Hardware name: System manufacturer System Product Name/PRIME Z270-A, BIOS 1302 03/15/2018 [ 57.370039] Call Trace: [ 57.370045] dump_stack+0x6d/0x89 [ 57.370056] check_preemption_disabled+0xc8/0xd0 [ 57.370068] __target_init_cmd+0x157/0x170 [target_core_mod] [ 57.370121] target_init_cmd+0x76/0x90 [target_core_mod] [ 57.370178] tcm_loop_queuecommand+0x109/0x210 [tcm_loop] [ 57.370197] scsi_queue_rq+0x38e/0xc40 [ 57.370224] __blk_mq_try_issue_directly+0x109/0x1c0 ... [2] [ 117.458597] BUG: using smp_processor_id() in preemptible [00000000] code: kworker/u16:8 [ 117.467279] caller is __target_init_cmd+0x157/0x170 [target_core_mod] [ 117.473893] CPU: 1 PID: 418 Comm: kworker/u16:6 Not tainted 5.13.0-rc1+ #34 [ 117.481150] Hardware name: System manufacturer System Product Name/PRIME Z270-A, BIOS 8 [ 117.481153] Workqueue: scsi_tmf_7 scmd_eh_abort_handler [ 117.481156] Call Trace: [ 117.481158] dump_stack+0x6d/0x89 [ 117.481162] check_preemption_disabled+0xc8/0xd0 [ 117.512575] target_submit_tmr+0x41/0x150 [target_core_mod] [ 117.519705] tcm_loop_issue_tmr+0xa7/0x100 [tcm_loop] [ 117.524913] tcm_loop_abort_task+0x43/0x60 [tcm_loop] [ 117.530137] scmd_eh_abort_handler+0x7b/0x230 [ 117.534681] process_one_work+0x268/0x580 [ 117.538862] worker_thread+0x55/0x3b0 [ 117.542652] ? process_one_work+0x580/0x580 [ 117.548351] kthread+0x143/0x160 [ 117.551675] ? kthread_create_worker_on_cpu+0x40/0x40 [ 117.556873] ret_from_fork+0x1f/0x30 Fixes: 1526d9f10c61 ("scsi: target: Make state_list per CPU") Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Cc: stable@vger.kernel.org # v5.11+ --- Changes from v1: * Used raw_smp_processor_id() instead of get_cpu() and put_cpu() drivers/target/target_core_transport.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)