From patchwork Tue Jan 27 21:57:28 2015 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Christophe Ricard X-Patchwork-Id: 5720871 Return-Path: X-Original-To: patchwork-tpmdd-devel@patchwork.kernel.org Delivered-To: patchwork-parsemail@patchwork2.web.kernel.org Received: from mail.kernel.org (mail.kernel.org [198.145.29.136]) by patchwork2.web.kernel.org (Postfix) with ESMTP id C348ABFFA8 for ; Tue, 27 Jan 2015 21:58:04 +0000 (UTC) Received: from mail.kernel.org (localhost [127.0.0.1]) by mail.kernel.org (Postfix) with ESMTP id 216C420108 for ; Tue, 27 Jan 2015 21:58:01 +0000 (UTC) Received: from lists.sourceforge.net (lists.sourceforge.net [216.34.181.88]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id 39A65201FE for ; Tue, 27 Jan 2015 21:57:57 +0000 (UTC) Received: from localhost ([127.0.0.1] helo=sfs-ml-1.v29.ch3.sourceforge.com) by sfs-ml-1.v29.ch3.sourceforge.com with esmtp (Exim 4.76) (envelope-from ) id 1YGE8x-00083a-Mh; Tue, 27 Jan 2015 21:57:55 +0000 Received: from sog-mx-1.v43.ch3.sourceforge.com ([172.29.43.191] helo=mx.sourceforge.net) by sfs-ml-1.v29.ch3.sourceforge.com with esmtp (Exim 4.76) (envelope-from ) id 1YGE8v-00083H-TO for tpmdd-devel@lists.sourceforge.net; Tue, 27 Jan 2015 21:57:53 +0000 Received-SPF: pass (sog-mx-1.v43.ch3.sourceforge.com: domain of gmail.com designates 74.125.82.178 as permitted sender) client-ip=74.125.82.178; envelope-from=christophe.ricard@gmail.com; helo=mail-we0-f178.google.com; Received: from mail-we0-f178.google.com ([74.125.82.178]) by sog-mx-1.v43.ch3.sourceforge.com with esmtps (TLSv1:RC4-SHA:128) (Exim 4.76) id 1YGE8r-0004Va-MP for tpmdd-devel@lists.sourceforge.net; Tue, 27 Jan 2015 21:57:53 +0000 Received: by mail-we0-f178.google.com with SMTP id k48so17405224wev.9 for ; Tue, 27 Jan 2015 13:57:44 -0800 (PST) X-Received: by 10.180.75.102 with SMTP id b6mr294511wiw.75.1422395864652; Tue, 27 Jan 2015 13:57:44 -0800 (PST) Received: from localhost.localdomain (ax113-6-78-236-204-66.fbx.proxad.net. [78.236.204.66]) by mx.google.com with ESMTPSA id fp2sm221275wib.8.2015.01.27.13.57.42 (version=TLSv1.2 cipher=ECDHE-RSA-AES128-SHA bits=128/128); Tue, 27 Jan 2015 13:57:43 -0800 (PST) From: Christophe Ricard X-Google-Original-From: Christophe Ricard To: PeterHuewe@gmx.de Date: Tue, 27 Jan 2015 22:57:28 +0100 Message-Id: <1422395850-21644-3-git-send-email-christophe-h.ricard@st.com> X-Mailer: git-send-email 2.1.0 In-Reply-To: <1422395850-21644-1-git-send-email-christophe-h.ricard@st.com> References: <1422395850-21644-1-git-send-email-christophe-h.ricard@st.com> X-Spam-Score: -1.6 (-) X-Headers-End: 1YGE8r-0004Va-MP Cc: devicetree@vger.kernel.org, jean-luc.blanc@st.com, ashley@ashleylai.com, tpmdd-devel@lists.sourceforge.net, christophe-h.ricard@st.com, benoit.houyere@st.com Subject: [tpmdd-devel] [PATCH v5 2/4] tpm/tpm_i2c_stm_st33: Split tpm_i2c_tpm_st33 in 2 layers (core + phy) X-BeenThere: tpmdd-devel@lists.sourceforge.net X-Mailman-Version: 2.1.9 Precedence: list List-Id: Tpm Device Driver maintainance List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Errors-To: tpmdd-devel-bounces@lists.sourceforge.net X-Spam-Status: No, score=-6.9 required=5.0 tests=BAYES_00, DKIM_ADSP_CUSTOM_MED, FREEMAIL_FROM,HK_RANDOM_ENVFROM,RCVD_IN_DNSWL_HI,T_RP_MATCHES_RCVD, UNPARSEABLE_RELAY autolearn=unavailable version=3.3.1 X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on mail.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP tpm_i2c_stm_st33 is a TIS 1.2 TPM with a core interface which can be used by different phy such as i2c or spi. The core part is called st33zp24 which is also the main part reference. include/linux/platform_data/tpm_stm_st33.h is renamed consequently. The driver is also split into an i2c phy in charge of sending/receiving data as well as managing platform data or dts configuration. Reviewed-by: Jason Gunthorpe Signed-off-by: Christophe Ricard Acked-by: Jarkko Sakkinen --- drivers/char/tpm/Kconfig | 11 +- drivers/char/tpm/Makefile | 2 +- drivers/char/tpm/st33zp24/Kconfig | 20 + drivers/char/tpm/st33zp24/Makefile | 9 + drivers/char/tpm/st33zp24/i2c.c | 278 +++++++++ drivers/char/tpm/st33zp24/st33zp24.c | 688 ++++++++++++++++++++++ drivers/char/tpm/st33zp24/st33zp24.h | 34 ++ drivers/char/tpm/tpm_i2c_stm_st33.c | 915 ----------------------------- include/linux/platform_data/st33zp24.h | 28 + include/linux/platform_data/tpm_stm_st33.h | 39 -- 10 files changed, 1059 insertions(+), 965 deletions(-) create mode 100644 drivers/char/tpm/st33zp24/Kconfig create mode 100644 drivers/char/tpm/st33zp24/Makefile create mode 100644 drivers/char/tpm/st33zp24/i2c.c create mode 100644 drivers/char/tpm/st33zp24/st33zp24.c create mode 100644 drivers/char/tpm/st33zp24/st33zp24.h delete mode 100644 drivers/char/tpm/tpm_i2c_stm_st33.c create mode 100644 include/linux/platform_data/st33zp24.h delete mode 100644 include/linux/platform_data/tpm_stm_st33.h diff --git a/drivers/char/tpm/Kconfig b/drivers/char/tpm/Kconfig index 9d4e375..2dc16d3 100644 --- a/drivers/char/tpm/Kconfig +++ b/drivers/char/tpm/Kconfig @@ -100,16 +100,6 @@ config TCG_IBMVTPM will be accessible from within Linux. To compile this driver as a module, choose M here; the module will be called tpm_ibmvtpm. -config TCG_TIS_I2C_ST33 - tristate "TPM Interface Specification 1.2 Interface (I2C - STMicroelectronics)" - depends on I2C - depends on GPIOLIB - ---help--- - If you have a TPM security chip from STMicroelectronics working with - an I2C bus say Yes and it will be accessible from within Linux. - To compile this driver as a module, choose M here; the module will be - called tpm_i2c_stm_st33. - config TCG_XEN tristate "XEN TPM Interface" depends on TCG_TPM && XEN @@ -131,4 +121,5 @@ config TCG_CRB from within Linux. To compile this driver as a module, choose M here; the module will be called tpm_crb. +source "drivers/char/tpm/st33zp24/Kconfig" endif # TCG_TPM diff --git a/drivers/char/tpm/Makefile b/drivers/char/tpm/Makefile index 990cf18..56e8f1f 100644 --- a/drivers/char/tpm/Makefile +++ b/drivers/char/tpm/Makefile @@ -20,6 +20,6 @@ obj-$(CONFIG_TCG_NSC) += tpm_nsc.o obj-$(CONFIG_TCG_ATMEL) += tpm_atmel.o obj-$(CONFIG_TCG_INFINEON) += tpm_infineon.o obj-$(CONFIG_TCG_IBMVTPM) += tpm_ibmvtpm.o -obj-$(CONFIG_TCG_TIS_I2C_ST33) += tpm_i2c_stm_st33.o +obj-$(CONFIG_TCG_TIS_ST33ZP24) += st33zp24/ obj-$(CONFIG_TCG_XEN) += xen-tpmfront.o obj-$(CONFIG_TCG_CRB) += tpm_crb.o diff --git a/drivers/char/tpm/st33zp24/Kconfig b/drivers/char/tpm/st33zp24/Kconfig new file mode 100644 index 0000000..51dcef5 --- /dev/null +++ b/drivers/char/tpm/st33zp24/Kconfig @@ -0,0 +1,20 @@ +config TCG_TIS_ST33ZP24 + tristate "STMicroelectronics TPM Interface Specification 1.2 Interface" + depends on GPIOLIB + ---help--- + STMicroelectronics ST33ZP24 core driver. It implements the core + TPM1.2 logic and hooks into the TPM kernel APIs. Physical layers will + register against it. + + To compile this driver as a module, choose m here. The module will be called + tpm_st33zp24. + +config TCG_TIS_ST33ZP24_I2C + tristate "TPM 1.2 ST33ZP24 I2C support" + depends on TCG_TIS_ST33ZP24 + depends on I2C + ---help--- + This module adds support for the STMicroelectronics TPM security chip + ST33ZP24 with i2c interface. + To compile this driver as a module, choose M here; the module will be + called tpm_st33zp24_i2c. diff --git a/drivers/char/tpm/st33zp24/Makefile b/drivers/char/tpm/st33zp24/Makefile new file mode 100644 index 0000000..414497f --- /dev/null +++ b/drivers/char/tpm/st33zp24/Makefile @@ -0,0 +1,9 @@ +# +# Makefile for ST33ZP24 TPM 1.2 driver +# + +tpm_st33zp24-objs = st33zp24.o +obj-$(CONFIG_TCG_TIS_ST33ZP24) += tpm_st33zp24.o + +tpm_st33zp24_i2c-objs = i2c.o +obj-$(CONFIG_TCG_TIS_ST33ZP24_I2C) += tpm_st33zp24_i2c.o diff --git a/drivers/char/tpm/st33zp24/i2c.c b/drivers/char/tpm/st33zp24/i2c.c new file mode 100644 index 0000000..95e3091 --- /dev/null +++ b/drivers/char/tpm/st33zp24/i2c.c @@ -0,0 +1,278 @@ +/* + * STMicroelectronics TPM I2C Linux driver for TPM ST33ZP24 + * Copyright (C) 2009 - 2015 STMicroelectronics + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see . + */ + +#include +#include +#include +#include +#include +#include +#include + +#include "st33zp24.h" + +#define TPM_DUMMY_BYTE 0xAA +#define TPM_WRITE_DIRECTION 0x80 +#define TPM_BUFSIZE 2048 + +struct st33zp24_i2c_phy { + struct i2c_client *client; + u8 buf[TPM_BUFSIZE + 1]; + int io_lpcpd; +}; + +/* + * write8_reg + * Send byte to the TIS register according to the ST33ZP24 I2C protocol. + * @param: tpm_register, the tpm tis register where the data should be written + * @param: tpm_data, the tpm_data to write inside the tpm_register + * @param: tpm_size, The length of the data + * @return: Returns negative errno, or else the number of bytes written. + */ +static int write8_reg(void *phy_id, u8 tpm_register, u8 *tpm_data, int tpm_size) +{ + struct st33zp24_i2c_phy *phy = phy_id; + + phy->buf[0] = tpm_register; + memcpy(phy->buf + 1, tpm_data, tpm_size); + return i2c_master_send(phy->client, phy->buf, tpm_size + 1); +} /* write8_reg() */ + +/* + * read8_reg + * Recv byte from the TIS register according to the ST33ZP24 I2C protocol. + * @param: tpm_register, the tpm tis register where the data should be read + * @param: tpm_data, the TPM response + * @param: tpm_size, tpm TPM response size to read. + * @return: number of byte read successfully: should be one if success. + */ +static int read8_reg(void *phy_id, u8 tpm_register, u8 *tpm_data, int tpm_size) +{ + struct st33zp24_i2c_phy *phy = phy_id; + u8 status = 0; + u8 data; + + data = TPM_DUMMY_BYTE; + status = write8_reg(phy, tpm_register, &data, 1); + if (status == 2) + status = i2c_master_recv(phy->client, tpm_data, tpm_size); + return status; +} /* read8_reg() */ + +/* + * st33zp24_i2c_send + * Send byte to the TIS register according to the ST33ZP24 I2C protocol. + * @param: phy_id, the phy description + * @param: tpm_register, the tpm tis register where the data should be written + * @param: tpm_data, the tpm_data to write inside the tpm_register + * @param: tpm_size, the length of the data + * @return: number of byte written successfully: should be one if success. + */ +static int st33zp24_i2c_send(void *phy_id, u8 tpm_register, u8 *tpm_data, + int tpm_size) +{ + return write8_reg(phy_id, tpm_register | TPM_WRITE_DIRECTION, tpm_data, + tpm_size); +} + +/* + * st33zp24_i2c_recv + * Recv byte from the TIS register according to the ST33ZP24 I2C protocol. + * @param: phy_id, the phy description + * @param: tpm_register, the tpm tis register where the data should be read + * @param: tpm_data, the TPM response + * @param: tpm_size, tpm TPM response size to read. + * @return: number of byte read successfully: should be one if success. + */ +static int st33zp24_i2c_recv(void *phy_id, u8 tpm_register, u8 *tpm_data, + int tpm_size) +{ + return read8_reg(phy_id, tpm_register, tpm_data, tpm_size); +} + +static const struct st33zp24_phy_ops i2c_phy_ops = { + .send = st33zp24_i2c_send, + .recv = st33zp24_i2c_recv, +}; + +#ifdef CONFIG_OF +static int st33zp24_i2c_of_request_resources(struct st33zp24_i2c_phy *phy) +{ + struct device_node *pp; + struct i2c_client *client = phy->client; + int gpio; + int ret; + + pp = client->dev.of_node; + if (!pp) { + dev_err(&client->dev, "No platform data\n"); + return -ENODEV; + } + + /* Get GPIO from device tree */ + gpio = of_get_named_gpio(pp, "lpcpd-gpios", 0); + if (gpio < 0) { + dev_err(&client->dev, + "Failed to retrieve lpcpd-gpios from dts.\n"); + phy->io_lpcpd = -1; + /* + * lpcpd pin is not specified. This is not an issue as + * power management can be also managed by TPM specific + * commands. So leave with a success status code. + */ + return 0; + } + /* GPIO request and configuration */ + ret = devm_gpio_request_one(&client->dev, gpio, + GPIOF_OUT_INIT_HIGH, "TPM IO LPCPD"); + if (ret) { + dev_err(&client->dev, "Failed to request lpcpd pin\n"); + return -ENODEV; + } + phy->io_lpcpd = gpio; + + return 0; +} +#else +static int st33zp24_i2c_of_request_resources(struct st33zp24_i2c_phy *phy) +{ + return -ENODEV; +} +#endif + +static int st33zp24_i2c_request_resources(struct i2c_client *client, + struct st33zp24_i2c_phy *phy) +{ + struct st33zp24_platform_data *pdata; + int ret; + + pdata = client->dev.platform_data; + if (!pdata) { + dev_err(&client->dev, "No platform data\n"); + return -ENODEV; + } + + /* store for late use */ + phy->io_lpcpd = pdata->io_lpcpd; + + if (gpio_is_valid(pdata->io_lpcpd)) { + ret = devm_gpio_request_one(&client->dev, + pdata->io_lpcpd, GPIOF_OUT_INIT_HIGH, + "TPM IO_LPCPD"); + if (ret) { + dev_err(&client->dev, "Failed to request lpcpd pin\n"); + return ret; + } + } + + return 0; +} + +/* + * st33zp24_i2c_probe initialize the TPM device + * @param: client, the i2c_client drescription (TPM I2C description). + * @param: id, the i2c_device_id struct. + * @return: 0 in case of success. + * -1 in other case. + */ +static int st33zp24_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + int ret; + struct st33zp24_platform_data *pdata; + struct st33zp24_i2c_phy *phy; + + if (!client) { + pr_info("%s: i2c client is NULL. Device not accessible.\n", + __func__); + return -ENODEV; + } + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { + dev_info(&client->dev, "client not i2c capable\n"); + return -ENODEV; + } + + phy = devm_kzalloc(&client->dev, sizeof(struct st33zp24_i2c_phy), + GFP_KERNEL); + if (!phy) + return -ENOMEM; + + phy->client = client; + pdata = client->dev.platform_data; + if (!pdata && client->dev.of_node) { + ret = st33zp24_i2c_of_request_resources(phy); + if (ret) + return ret; + } else if (pdata) { + ret = st33zp24_i2c_request_resources(client, phy); + if (ret) + return ret; + } + + return st33zp24_probe(phy, &i2c_phy_ops, &client->dev, client->irq, + phy->io_lpcpd); +} + +/* + * st33zp24_i2c_remove remove the TPM device + * @param: client, the i2c_client description (TPM I2C description). + * @return: 0 in case of success. + */ +static int st33zp24_i2c_remove(struct i2c_client *client) +{ + struct tpm_chip *chip = i2c_get_clientdata(client); + + return st33zp24_remove(chip); +} + +static const struct i2c_device_id st33zp24_i2c_id[] = { + {TPM_ST33_I2C, 0}, + {} +}; +MODULE_DEVICE_TABLE(i2c, st33zp24_i2c_id); + +#ifdef CONFIG_OF +static const struct of_device_id of_st33zp24_i2c_match[] = { + { .compatible = "st,st33zp24-i2c", }, + {} +}; +MODULE_DEVICE_TABLE(of, of_st33zp24_i2c_match); +#endif + +static SIMPLE_DEV_PM_OPS(st33zp24_i2c_ops, st33zp24_pm_suspend, + st33zp24_pm_resume); + +static struct i2c_driver st33zp24_i2c_driver = { + .driver = { + .owner = THIS_MODULE, + .name = TPM_ST33_I2C, + .pm = &st33zp24_i2c_ops, + .of_match_table = of_match_ptr(of_st33zp24_i2c_match), + }, + .probe = st33zp24_i2c_probe, + .remove = st33zp24_i2c_remove, + .id_table = st33zp24_i2c_id +}; + +module_i2c_driver(st33zp24_i2c_driver); + +MODULE_AUTHOR("TPM support (TPMsupport@list.st.com)"); +MODULE_DESCRIPTION("STM TPM 1.2 I2C ST33 Driver"); +MODULE_VERSION("1.3.0"); +MODULE_LICENSE("GPL"); diff --git a/drivers/char/tpm/st33zp24/st33zp24.c b/drivers/char/tpm/st33zp24/st33zp24.c new file mode 100644 index 0000000..0aceb0e --- /dev/null +++ b/drivers/char/tpm/st33zp24/st33zp24.c @@ -0,0 +1,688 @@ +/* + * STMicroelectronics TPM Linux driver for TPM ST33ZP24 + * Copyright (C) 2009 - 2015 STMicroelectronics + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see . + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "../tpm.h" +#include "st33zp24.h" + +#define TPM_ACCESS 0x0 +#define TPM_STS 0x18 +#define TPM_DATA_FIFO 0x24 +#define TPM_INTF_CAPABILITY 0x14 +#define TPM_INT_STATUS 0x10 +#define TPM_INT_ENABLE 0x08 + +#define LOCALITY0 0 + +enum st33zp24_access { + TPM_ACCESS_VALID = 0x80, + TPM_ACCESS_ACTIVE_LOCALITY = 0x20, + TPM_ACCESS_REQUEST_PENDING = 0x04, + TPM_ACCESS_REQUEST_USE = 0x02, +}; + +enum st33zp24_status { + TPM_STS_VALID = 0x80, + TPM_STS_COMMAND_READY = 0x40, + TPM_STS_GO = 0x20, + TPM_STS_DATA_AVAIL = 0x10, + TPM_STS_DATA_EXPECT = 0x08, +}; + +enum st33zp24_int_flags { + TPM_GLOBAL_INT_ENABLE = 0x80, + TPM_INTF_CMD_READY_INT = 0x080, + TPM_INTF_FIFO_AVALAIBLE_INT = 0x040, + TPM_INTF_WAKE_UP_READY_INT = 0x020, + TPM_INTF_LOCALITY_CHANGE_INT = 0x004, + TPM_INTF_STS_VALID_INT = 0x002, + TPM_INTF_DATA_AVAIL_INT = 0x001, +}; + +enum tis_defaults { + TIS_SHORT_TIMEOUT = 750, + TIS_LONG_TIMEOUT = 2000, +}; + +struct st33zp24_dev { + struct tpm_chip *chip; + void *phy_id; + const struct st33zp24_phy_ops *ops; + u32 intrs; + int io_lpcpd; +}; + +/* + * clear_interruption clear the pending interrupt. + * @param: tpm_dev, the tpm device device. + * @return: the interrupt status value. + */ +static u8 clear_interruption(struct st33zp24_dev *tpm_dev) +{ + u8 interrupt; + + tpm_dev->ops->recv(tpm_dev->phy_id, TPM_INT_STATUS, &interrupt, 1); + tpm_dev->ops->send(tpm_dev->phy_id, TPM_INT_STATUS, &interrupt, 1); + return interrupt; +} /* clear_interruption() */ + +/* + * st33zp24_cancel, cancel the current command execution or + * set STS to COMMAND READY. + * @param: chip, the tpm_chip description as specified in driver/char/tpm/tpm.h + */ +static void st33zp24_cancel(struct tpm_chip *chip) +{ + struct st33zp24_dev *tpm_dev; + u8 data; + + tpm_dev = (struct st33zp24_dev *)TPM_VPRIV(chip); + + data = TPM_STS_COMMAND_READY; + tpm_dev->ops->send(tpm_dev->phy_id, TPM_STS, &data, 1); +} /* st33zp24_cancel() */ + +/* + * st33zp24_status return the TPM_STS register + * @param: chip, the tpm chip description + * @return: the TPM_STS register value. + */ +static u8 st33zp24_status(struct tpm_chip *chip) +{ + struct st33zp24_dev *tpm_dev; + u8 data; + + tpm_dev = (struct st33zp24_dev *)TPM_VPRIV(chip); + + tpm_dev->ops->recv(tpm_dev->phy_id, TPM_STS, &data, 1); + return data; +} /* st33zp24_status() */ + +/* + * check_locality if the locality is active + * @param: chip, the tpm chip description + * @return: the active locality or -EACCESS. + */ +static int check_locality(struct tpm_chip *chip) +{ + struct st33zp24_dev *tpm_dev; + u8 data; + u8 status; + + tpm_dev = (struct st33zp24_dev *)TPM_VPRIV(chip); + + status = tpm_dev->ops->recv(tpm_dev->phy_id, TPM_ACCESS, &data, 1); + if (status && (data & + (TPM_ACCESS_ACTIVE_LOCALITY | TPM_ACCESS_VALID)) == + (TPM_ACCESS_ACTIVE_LOCALITY | TPM_ACCESS_VALID)) + return chip->vendor.locality; + + return -EACCES; +} /* check_locality() */ + +/* + * request_locality request the TPM locality + * @param: chip, the chip description + * @return: the active locality or negative value. + */ +static int request_locality(struct tpm_chip *chip) +{ + unsigned long stop; + long ret; + struct st33zp24_dev *tpm_dev; + u8 data; + + if (check_locality(chip) == chip->vendor.locality) + return chip->vendor.locality; + + tpm_dev = (struct st33zp24_dev *)TPM_VPRIV(chip); + + data = TPM_ACCESS_REQUEST_USE; + ret = tpm_dev->ops->send(tpm_dev->phy_id, TPM_ACCESS, &data, 1); + if (ret < 0) + return ret; + + stop = jiffies + chip->vendor.timeout_a; + + /* Request locality is usually effective after the request */ + do { + if (check_locality(chip) >= 0) + return chip->vendor.locality; + msleep(TPM_TIMEOUT); + } while (time_before(jiffies, stop)); + + /* could not get locality */ + return -EACCES; +} /* request_locality() */ + +/* + * release_locality release the active locality + * @param: chip, the tpm chip description. + */ +static void release_locality(struct tpm_chip *chip) +{ + struct st33zp24_dev *tpm_dev; + u8 data; + + tpm_dev = (struct st33zp24_dev *)TPM_VPRIV(chip); + data = TPM_ACCESS_ACTIVE_LOCALITY; + + tpm_dev->ops->send(tpm_dev->phy_id, TPM_ACCESS, &data, 1); +} + +/* + * get_burstcount return the burstcount value + * @param: chip, the chip description + * return: the burstcount or negative value. + */ +static int get_burstcount(struct tpm_chip *chip) +{ + unsigned long stop; + int burstcnt, status; + u8 tpm_reg, temp; + struct st33zp24_dev *tpm_dev; + + tpm_dev = (struct st33zp24_dev *)TPM_VPRIV(chip); + + stop = jiffies + chip->vendor.timeout_d; + do { + tpm_reg = TPM_STS + 1; + status = tpm_dev->ops->recv(tpm_dev->phy_id, tpm_reg, &temp, 1); + if (status < 0) + return -EBUSY; + + tpm_reg = TPM_STS + 1; + burstcnt = temp; + status = tpm_dev->ops->recv(tpm_dev->phy_id, tpm_reg, &temp, 1); + if (status < 0) + return -EBUSY; + + burstcnt |= temp << 8; + if (burstcnt) + return burstcnt; + msleep(TPM_TIMEOUT); + } while (time_before(jiffies, stop)); + return -EBUSY; +} /* get_burstcount() */ + + +/* + * wait_for_tpm_stat_cond + * @param: chip, chip description + * @param: mask, expected mask value + * @param: check_cancel, does the command expected to be canceled ? + * @param: canceled, did we received a cancel request ? + * @return: true if status == mask or if the command is canceled. + * false in other cases. + */ +static bool wait_for_tpm_stat_cond(struct tpm_chip *chip, u8 mask, + bool check_cancel, bool *canceled) +{ + u8 status = chip->ops->status(chip); + + *canceled = false; + if ((status & mask) == mask) + return true; + if (check_cancel && chip->ops->req_canceled(chip, status)) { + *canceled = true; + return true; + } + return false; +} + +/* + * wait_for_stat wait for a TPM_STS value + * @param: chip, the tpm chip description + * @param: mask, the value mask to wait + * @param: timeout, the timeout + * @param: queue, the wait queue. + * @param: check_cancel, does the command can be cancelled ? + * @return: the tpm status, 0 if success, -ETIME if timeout is reached. + */ +static int wait_for_stat(struct tpm_chip *chip, u8 mask, unsigned long timeout, + wait_queue_head_t *queue, bool check_cancel) +{ + unsigned long stop; + int ret; + bool canceled = false; + bool condition; + u32 cur_intrs; + u8 status; + struct st33zp24_dev *tpm_dev; + + tpm_dev = (struct st33zp24_dev *)TPM_VPRIV(chip); + + /* check current status */ + status = st33zp24_status(chip); + if ((status & mask) == mask) + return 0; + + stop = jiffies + timeout; + + if (chip->vendor.irq) { + cur_intrs = tpm_dev->intrs; + clear_interruption(tpm_dev); + enable_irq(chip->vendor.irq); + + do { + if (ret == -ERESTARTSYS && freezing(current)) + clear_thread_flag(TIF_SIGPENDING); + + timeout = stop - jiffies; + if ((long) timeout <= 0) + return -1; + + ret = wait_event_interruptible_timeout(*queue, + cur_intrs != tpm_dev->intrs, + timeout); + clear_interruption(tpm_dev); + condition = wait_for_tpm_stat_cond(chip, mask, + check_cancel, &canceled); + if (ret >= 0 && condition) { + if (canceled) + return -ECANCELED; + return 0; + } + } while (ret == -ERESTARTSYS && freezing(current)); + + disable_irq_nosync(chip->vendor.irq); + + } else { + do { + msleep(TPM_TIMEOUT); + status = chip->ops->status(chip); + if ((status & mask) == mask) + return 0; + } while (time_before(jiffies, stop)); + } + + return -ETIME; +} /* wait_for_stat() */ + +/* + * recv_data receive data + * @param: chip, the tpm chip description + * @param: buf, the buffer where the data are received + * @param: count, the number of data to receive + * @return: the number of bytes read from TPM FIFO. + */ +static int recv_data(struct tpm_chip *chip, u8 *buf, size_t count) +{ + int size = 0, burstcnt, len, ret; + struct st33zp24_dev *tpm_dev; + + tpm_dev = (struct st33zp24_dev *)TPM_VPRIV(chip); + + while (size < count && + wait_for_stat(chip, + TPM_STS_DATA_AVAIL | TPM_STS_VALID, + chip->vendor.timeout_c, + &chip->vendor.read_queue, true) == 0) { + burstcnt = get_burstcount(chip); + if (burstcnt < 0) + return burstcnt; + len = min_t(int, burstcnt, count - size); + ret = tpm_dev->ops->recv(tpm_dev->phy_id, TPM_DATA_FIFO, + buf + size, len); + if (ret < 0) + return ret; + + size += len; + } + return size; +} + +/* + * tpm_ioserirq_handler the serirq irq handler + * @param: irq, the tpm chip description + * @param: dev_id, the description of the chip + * @return: the status of the handler. + */ +static irqreturn_t tpm_ioserirq_handler(int irq, void *dev_id) +{ + struct tpm_chip *chip = dev_id; + struct st33zp24_dev *tpm_dev; + + tpm_dev = (struct st33zp24_dev *)TPM_VPRIV(chip); + + tpm_dev->intrs++; + wake_up_interruptible(&chip->vendor.read_queue); + disable_irq_nosync(chip->vendor.irq); + + return IRQ_HANDLED; +} /* tpm_ioserirq_handler() */ + +/* + * st33zp24_send send TPM commands through the I2C bus. + * + * @param: chip, the tpm_chip description as specified in driver/char/tpm/tpm.h + * @param: buf, the buffer to send. + * @param: count, the number of bytes to send. + * @return: In case of success the number of bytes sent. + * In other case, a < 0 value describing the issue. + */ +static int st33zp24_send(struct tpm_chip *chip, unsigned char *buf, + size_t len) +{ + u32 status, i, size; + int burstcnt = 0; + int ret; + u8 data; + struct st33zp24_dev *tpm_dev; + + if (!chip) + return -EBUSY; + if (len < TPM_HEADER_SIZE) + return -EBUSY; + + tpm_dev = (struct st33zp24_dev *)TPM_VPRIV(chip); + + ret = request_locality(chip); + if (ret < 0) + return ret; + + status = st33zp24_status(chip); + if ((status & TPM_STS_COMMAND_READY) == 0) { + st33zp24_cancel(chip); + if (wait_for_stat + (chip, TPM_STS_COMMAND_READY, chip->vendor.timeout_b, + &chip->vendor.read_queue, false) < 0) { + ret = -ETIME; + goto out_err; + } + } + + for (i = 0; i < len - 1;) { + burstcnt = get_burstcount(chip); + if (burstcnt < 0) + return burstcnt; + size = min_t(int, len - i - 1, burstcnt); + ret = tpm_dev->ops->send(tpm_dev->phy_id, TPM_DATA_FIFO, + buf + i, size); + if (ret < 0) + goto out_err; + + i += size; + } + + status = st33zp24_status(chip); + if ((status & TPM_STS_DATA_EXPECT) == 0) { + ret = -EIO; + goto out_err; + } + + ret = tpm_dev->ops->send(tpm_dev->phy_id, TPM_DATA_FIFO, + buf + len - 1, 1); + if (ret < 0) + goto out_err; + + status = st33zp24_status(chip); + if ((status & TPM_STS_DATA_EXPECT) != 0) { + ret = -EIO; + goto out_err; + } + + data = TPM_STS_GO; + ret = tpm_dev->ops->send(tpm_dev->phy_id, TPM_STS, &data, 1); + if (ret < 0) + goto out_err; + + return len; +out_err: + st33zp24_cancel(chip); + release_locality(chip); + return ret; +} + +/* + * st33zp24_recv received TPM response through TPM phy. + * @param: chip, the tpm_chip description as specified in driver/char/tpm/tpm.h. + * @param: buf, the buffer to store datas. + * @param: count, the number of bytes to send. + * @return: In case of success the number of bytes received. + * In other case, a < 0 value describing the issue. + */ +static int st33zp24_recv(struct tpm_chip *chip, unsigned char *buf, + size_t count) +{ + int size = 0; + int expected; + + if (!chip) + return -EBUSY; + + if (count < TPM_HEADER_SIZE) { + size = -EIO; + goto out; + } + + size = recv_data(chip, buf, TPM_HEADER_SIZE); + if (size < TPM_HEADER_SIZE) { + dev_err(&chip->dev, "Unable to read header\n"); + goto out; + } + + expected = be32_to_cpu(*(__be32 *)(buf + 2)); + if (expected > count) { + size = -EIO; + goto out; + } + + size += recv_data(chip, &buf[TPM_HEADER_SIZE], + expected - TPM_HEADER_SIZE); + if (size < expected) { + dev_err(&chip->dev, "Unable to read remainder of result\n"); + size = -ETIME; + } + +out: + st33zp24_cancel(chip); + release_locality(chip); + return size; +} + +/* + * st33zp24_req_canceled + * @param: chip, the tpm_chip description as specified in driver/char/tpm/tpm.h. + * @param: status, the TPM status. + * @return: Does TPM ready to compute a new command ? true. + */ +static bool st33zp24_req_canceled(struct tpm_chip *chip, u8 status) +{ + return (status == TPM_STS_COMMAND_READY); +} + +static const struct tpm_class_ops st33zp24_tpm = { + .send = st33zp24_send, + .recv = st33zp24_recv, + .cancel = st33zp24_cancel, + .status = st33zp24_status, + .req_complete_mask = TPM_STS_DATA_AVAIL | TPM_STS_VALID, + .req_complete_val = TPM_STS_DATA_AVAIL | TPM_STS_VALID, + .req_canceled = st33zp24_req_canceled, +}; + +/* + * st33zp24_probe initialize the TPM device + * @param: client, the i2c_client drescription (TPM I2C description). + * @param: id, the i2c_device_id struct. + * @return: 0 in case of success. + * -1 in other case. + */ +int st33zp24_probe(void *phy_id, const struct st33zp24_phy_ops *ops, + struct device *dev, int irq, int io_lpcpd) +{ + int ret; + u8 intmask = 0; + struct tpm_chip *chip; + struct st33zp24_dev *tpm_dev; + + chip = tpmm_chip_alloc(dev, &st33zp24_tpm); + if (IS_ERR(chip)) + return PTR_ERR(chip); + + tpm_dev = devm_kzalloc(dev, sizeof(struct st33zp24_dev), + GFP_KERNEL); + if (!tpm_dev) + return -ENOMEM; + + TPM_VPRIV(chip) = tpm_dev; + tpm_dev->phy_id = phy_id; + tpm_dev->ops = ops; + + chip->vendor.timeout_a = msecs_to_jiffies(TIS_SHORT_TIMEOUT); + chip->vendor.timeout_b = msecs_to_jiffies(TIS_LONG_TIMEOUT); + chip->vendor.timeout_c = msecs_to_jiffies(TIS_SHORT_TIMEOUT); + chip->vendor.timeout_d = msecs_to_jiffies(TIS_SHORT_TIMEOUT); + + chip->vendor.locality = LOCALITY0; + + if (irq) { + /* INTERRUPT Setup */ + init_waitqueue_head(&chip->vendor.read_queue); + tpm_dev->intrs = 0; + + if (request_locality(chip) != LOCALITY0) { + ret = -ENODEV; + goto _tpm_clean_answer; + } + + clear_interruption(tpm_dev); + ret = devm_request_irq(dev, irq, tpm_ioserirq_handler, + IRQF_TRIGGER_HIGH, "TPM SERIRQ management", + chip); + if (ret < 0) { + dev_err(&chip->dev, "TPM SERIRQ signals %d not available\n", + irq); + goto _tpm_clean_answer; + } + + intmask |= TPM_INTF_CMD_READY_INT + | TPM_INTF_STS_VALID_INT + | TPM_INTF_DATA_AVAIL_INT; + + ret = tpm_dev->ops->send(tpm_dev->phy_id, TPM_INT_ENABLE, + &intmask, 1); + if (ret < 0) + goto _tpm_clean_answer; + + intmask = TPM_GLOBAL_INT_ENABLE; + ret = tpm_dev->ops->send(tpm_dev->phy_id, (TPM_INT_ENABLE + 3), + &intmask, 1); + if (ret < 0) + goto _tpm_clean_answer; + + chip->vendor.irq = irq; + + disable_irq_nosync(chip->vendor.irq); + + tpm_gen_interrupt(chip); + } + + tpm_get_timeouts(chip); + tpm_do_selftest(chip); + + return tpm_chip_register(chip); +_tpm_clean_answer: + dev_info(&chip->dev, "TPM initialization fail\n"); + return ret; +} +EXPORT_SYMBOL(st33zp24_probe); + +/* + * st33zp24_remove remove the TPM device + * @param: tpm_data, the tpm phy. + * @return: 0 in case of success. + */ +int st33zp24_remove(struct tpm_chip *chip) +{ + tpm_chip_unregister(chip); + return 0; +} +EXPORT_SYMBOL(st33zp24_remove); + +#ifdef CONFIG_PM_SLEEP +/* + * st33zp24_pm_suspend suspend the TPM device + * @param: tpm_data, the tpm phy. + * @param: mesg, the power management message. + * @return: 0 in case of success. + */ +int st33zp24_pm_suspend(struct device *dev) +{ + struct tpm_chip *chip = dev_get_drvdata(dev); + struct st33zp24_dev *tpm_dev; + int ret = 0; + + tpm_dev = (struct st33zp24_dev *)TPM_VPRIV(chip); + + if (gpio_is_valid(tpm_dev->io_lpcpd)) + gpio_set_value(tpm_dev->io_lpcpd, 0); + else + ret = tpm_pm_suspend(dev); + + return ret; +} /* st33zp24_pm_suspend() */ +EXPORT_SYMBOL(st33zp24_pm_suspend); + +/* + * st33zp24_pm_resume resume the TPM device + * @param: tpm_data, the tpm phy. + * @return: 0 in case of success. + */ +int st33zp24_pm_resume(struct device *dev) +{ + struct tpm_chip *chip = dev_get_drvdata(dev); + struct st33zp24_dev *tpm_dev; + int ret = 0; + + tpm_dev = (struct st33zp24_dev *)TPM_VPRIV(chip); + + if (gpio_is_valid(tpm_dev->io_lpcpd)) { + gpio_set_value(tpm_dev->io_lpcpd, 1); + ret = wait_for_stat(chip, + TPM_STS_VALID, chip->vendor.timeout_b, + &chip->vendor.read_queue, false); + } else { + ret = tpm_pm_resume(dev); + if (!ret) + tpm_do_selftest(chip); + } + return ret; +} /* st33zp24_pm_resume() */ +EXPORT_SYMBOL(st33zp24_pm_resume); +#endif + +MODULE_AUTHOR("TPM support (TPMsupport@list.st.com)"); +MODULE_DESCRIPTION("ST33ZP24 TPM 1.2 driver"); +MODULE_VERSION("1.3.0"); +MODULE_LICENSE("GPL"); diff --git a/drivers/char/tpm/st33zp24/st33zp24.h b/drivers/char/tpm/st33zp24/st33zp24.h new file mode 100644 index 0000000..43ad39a --- /dev/null +++ b/drivers/char/tpm/st33zp24/st33zp24.h @@ -0,0 +1,34 @@ +/* + * STMicroelectronics TPM Linux driver for TPM ST33ZP24 + * Copyright (C) 2009 - 2015 STMicroelectronics + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see . + */ + +#ifndef __LOCAL_ST33ZP24_H__ +#define __LOCAL_ST33ZP24_H__ + +struct st33zp24_phy_ops { + int (*send)(void *phy_id, u8 tpm_register, u8 *tpm_data, int tpm_size); + int (*recv)(void *phy_id, u8 tpm_register, u8 *tpm_data, int tpm_size); +}; + +#ifdef CONFIG_PM_SLEEP +int st33zp24_pm_suspend(struct device *dev); +int st33zp24_pm_resume(struct device *dev); +#endif + +int st33zp24_probe(void *phy_id, const struct st33zp24_phy_ops *ops, + struct device *dev, int irq, int io_lpcpd); +int st33zp24_remove(struct tpm_chip *chip); +#endif /* __LOCAL_ST33ZP24_H__ */ diff --git a/drivers/char/tpm/tpm_i2c_stm_st33.c b/drivers/char/tpm/tpm_i2c_stm_st33.c deleted file mode 100644 index 882c60a..0000000 --- a/drivers/char/tpm/tpm_i2c_stm_st33.c +++ /dev/null @@ -1,915 +0,0 @@ -/* - * STMicroelectronics TPM I2C Linux driver for TPM ST33ZP24 - * Copyright (C) 2009, 2010, 2014 STMicroelectronics - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see . - * - * STMicroelectronics version 1.2.1, Copyright (C) 2014 - * STMicroelectronics comes with ABSOLUTELY NO WARRANTY. - * This is free software, and you are welcome to redistribute it - * under certain conditions. - * - * @Author: Christophe RICARD tpmsupport@st.com - * - * @File: tpm_stm_st33_i2c.c - * - * @Synopsis: - * 09/15/2010: First shot driver tpm_tis driver for - * lpc is used as model. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include "tpm.h" - -#define TPM_ACCESS 0x0 -#define TPM_STS 0x18 -#define TPM_HASH_END 0x20 -#define TPM_DATA_FIFO 0x24 -#define TPM_HASH_DATA 0x24 -#define TPM_HASH_START 0x28 -#define TPM_INTF_CAPABILITY 0x14 -#define TPM_INT_STATUS 0x10 -#define TPM_INT_ENABLE 0x08 - -#define TPM_DUMMY_BYTE 0xAA -#define TPM_WRITE_DIRECTION 0x80 -#define TPM_HEADER_SIZE 10 -#define TPM_BUFSIZE 2048 - -#define LOCALITY0 0 - - -enum stm33zp24_access { - TPM_ACCESS_VALID = 0x80, - TPM_ACCESS_ACTIVE_LOCALITY = 0x20, - TPM_ACCESS_REQUEST_PENDING = 0x04, - TPM_ACCESS_REQUEST_USE = 0x02, -}; - -enum stm33zp24_status { - TPM_STS_VALID = 0x80, - TPM_STS_COMMAND_READY = 0x40, - TPM_STS_GO = 0x20, - TPM_STS_DATA_AVAIL = 0x10, - TPM_STS_DATA_EXPECT = 0x08, -}; - -enum stm33zp24_int_flags { - TPM_GLOBAL_INT_ENABLE = 0x80, - TPM_INTF_CMD_READY_INT = 0x080, - TPM_INTF_FIFO_AVALAIBLE_INT = 0x040, - TPM_INTF_WAKE_UP_READY_INT = 0x020, - TPM_INTF_LOCALITY_CHANGE_INT = 0x004, - TPM_INTF_STS_VALID_INT = 0x002, - TPM_INTF_DATA_AVAIL_INT = 0x001, -}; - -enum tis_defaults { - TIS_SHORT_TIMEOUT = 750, - TIS_LONG_TIMEOUT = 2000, -}; - -struct tpm_stm_dev { - struct i2c_client *client; - struct tpm_chip *chip; - u8 buf[TPM_BUFSIZE + 1]; - u32 intrs; - int io_lpcpd; -}; - -/* - * write8_reg - * Send byte to the TIS register according to the ST33ZP24 I2C protocol. - * @param: tpm_register, the tpm tis register where the data should be written - * @param: tpm_data, the tpm_data to write inside the tpm_register - * @param: tpm_size, The length of the data - * @return: Returns negative errno, or else the number of bytes written. - */ -static int write8_reg(struct tpm_stm_dev *tpm_dev, u8 tpm_register, - u8 *tpm_data, u16 tpm_size) -{ - tpm_dev->buf[0] = tpm_register; - memcpy(tpm_dev->buf + 1, tpm_data, tpm_size); - return i2c_master_send(tpm_dev->client, tpm_dev->buf, tpm_size + 1); -} /* write8_reg() */ - -/* - * read8_reg - * Recv byte from the TIS register according to the ST33ZP24 I2C protocol. - * @param: tpm_register, the tpm tis register where the data should be read - * @param: tpm_data, the TPM response - * @param: tpm_size, tpm TPM response size to read. - * @return: number of byte read successfully: should be one if success. - */ -static int read8_reg(struct tpm_stm_dev *tpm_dev, u8 tpm_register, - u8 *tpm_data, int tpm_size) -{ - u8 status = 0; - u8 data; - - data = TPM_DUMMY_BYTE; - status = write8_reg(tpm_dev, tpm_register, &data, 1); - if (status == 2) - status = i2c_master_recv(tpm_dev->client, tpm_data, tpm_size); - return status; -} /* read8_reg() */ - -/* - * I2C_WRITE_DATA - * Send byte to the TIS register according to the ST33ZP24 I2C protocol. - * @param: tpm_dev, the chip description - * @param: tpm_register, the tpm tis register where the data should be written - * @param: tpm_data, the tpm_data to write inside the tpm_register - * @param: tpm_size, The length of the data - * @return: number of byte written successfully: should be one if success. - */ -#define I2C_WRITE_DATA(tpm_dev, tpm_register, tpm_data, tpm_size) \ - (write8_reg(tpm_dev, tpm_register | \ - TPM_WRITE_DIRECTION, tpm_data, tpm_size)) - -/* - * I2C_READ_DATA - * Recv byte from the TIS register according to the ST33ZP24 I2C protocol. - * @param: tpm_dev, the chip description - * @param: tpm_register, the tpm tis register where the data should be read - * @param: tpm_data, the TPM response - * @param: tpm_size, tpm TPM response size to read. - * @return: number of byte read successfully: should be one if success. - */ -#define I2C_READ_DATA(tpm_dev, tpm_register, tpm_data, tpm_size) \ - (read8_reg(tpm_dev, tpm_register, tpm_data, tpm_size)) - -/* - * clear_interruption - * clear the TPM interrupt register. - * @param: tpm, the chip description - * @return: the TPM_INT_STATUS value - */ -static u8 clear_interruption(struct tpm_stm_dev *tpm_dev) -{ - u8 interrupt; - - I2C_READ_DATA(tpm_dev, TPM_INT_STATUS, &interrupt, 1); - I2C_WRITE_DATA(tpm_dev, TPM_INT_STATUS, &interrupt, 1); - return interrupt; -} /* clear_interruption() */ - -/* - * tpm_stm_i2c_cancel, cancel is not implemented. - * @param: chip, the tpm_chip description as specified in driver/char/tpm/tpm.h - */ -static void tpm_stm_i2c_cancel(struct tpm_chip *chip) -{ - struct tpm_stm_dev *tpm_dev; - u8 data; - - tpm_dev = (struct tpm_stm_dev *)TPM_VPRIV(chip); - - data = TPM_STS_COMMAND_READY; - I2C_WRITE_DATA(tpm_dev, TPM_STS, &data, 1); -} /* tpm_stm_i2c_cancel() */ - -/* - * tpm_stm_spi_status return the TPM_STS register - * @param: chip, the tpm chip description - * @return: the TPM_STS register value. - */ -static u8 tpm_stm_i2c_status(struct tpm_chip *chip) -{ - struct tpm_stm_dev *tpm_dev; - u8 data; - - tpm_dev = (struct tpm_stm_dev *)TPM_VPRIV(chip); - - I2C_READ_DATA(tpm_dev, TPM_STS, &data, 1); - return data; -} /* tpm_stm_i2c_status() */ - - -/* - * check_locality if the locality is active - * @param: chip, the tpm chip description - * @return: the active locality or -EACCESS. - */ -static int check_locality(struct tpm_chip *chip) -{ - struct tpm_stm_dev *tpm_dev; - u8 data; - u8 status; - - tpm_dev = (struct tpm_stm_dev *)TPM_VPRIV(chip); - - status = I2C_READ_DATA(tpm_dev, TPM_ACCESS, &data, 1); - if (status && (data & - (TPM_ACCESS_ACTIVE_LOCALITY | TPM_ACCESS_VALID)) == - (TPM_ACCESS_ACTIVE_LOCALITY | TPM_ACCESS_VALID)) - return chip->vendor.locality; - - return -EACCES; -} /* check_locality() */ - -/* - * request_locality request the TPM locality - * @param: chip, the chip description - * @return: the active locality or EACCESS. - */ -static int request_locality(struct tpm_chip *chip) -{ - unsigned long stop; - long ret; - struct tpm_stm_dev *tpm_dev; - u8 data; - - if (check_locality(chip) == chip->vendor.locality) - return chip->vendor.locality; - - tpm_dev = (struct tpm_stm_dev *)TPM_VPRIV(chip); - - data = TPM_ACCESS_REQUEST_USE; - ret = I2C_WRITE_DATA(tpm_dev, TPM_ACCESS, &data, 1); - if (ret < 0) - goto end; - - stop = jiffies + chip->vendor.timeout_a; - - /* Request locality is usually effective after the request */ - do { - if (check_locality(chip) >= 0) - return chip->vendor.locality; - msleep(TPM_TIMEOUT); - } while (time_before(jiffies, stop)); - ret = -EACCES; -end: - return ret; -} /* request_locality() */ - -/* - * release_locality release the active locality - * @param: chip, the tpm chip description. - */ -static void release_locality(struct tpm_chip *chip) -{ - struct tpm_stm_dev *tpm_dev; - u8 data; - - tpm_dev = (struct tpm_stm_dev *)TPM_VPRIV(chip); - data = TPM_ACCESS_ACTIVE_LOCALITY; - - I2C_WRITE_DATA(tpm_dev, TPM_ACCESS, &data, 1); -} - -/* - * get_burstcount return the burstcount address 0x19 0x1A - * @param: chip, the chip description - * return: the burstcount. - */ -static int get_burstcount(struct tpm_chip *chip) -{ - unsigned long stop; - int burstcnt, status; - u8 tpm_reg, temp; - struct tpm_stm_dev *tpm_dev; - - tpm_dev = (struct tpm_stm_dev *)TPM_VPRIV(chip); - - stop = jiffies + chip->vendor.timeout_d; - do { - tpm_reg = TPM_STS + 1; - status = I2C_READ_DATA(tpm_dev, tpm_reg, &temp, 1); - if (status < 0) - goto end; - - tpm_reg = tpm_reg + 1; - burstcnt = temp; - status = I2C_READ_DATA(tpm_dev, tpm_reg, &temp, 1); - if (status < 0) - goto end; - - burstcnt |= temp << 8; - if (burstcnt) - return burstcnt; - msleep(TPM_TIMEOUT); - } while (time_before(jiffies, stop)); - -end: - return -EBUSY; -} /* get_burstcount() */ - -static bool wait_for_tpm_stat_cond(struct tpm_chip *chip, u8 mask, - bool check_cancel, bool *canceled) -{ - u8 status = chip->ops->status(chip); - - *canceled = false; - if ((status & mask) == mask) - return true; - if (check_cancel && chip->ops->req_canceled(chip, status)) { - *canceled = true; - return true; - } - return false; -} - -/* - * interrupt_to_status - * @param: irq_mask, the irq mask value to wait - * @return: the corresponding tpm_sts value - */ -static u8 interrupt_to_status(u8 irq_mask) -{ - u8 status = 0; - - if ((irq_mask & TPM_INTF_STS_VALID_INT) == TPM_INTF_STS_VALID_INT) - status |= TPM_STS_VALID; - if ((irq_mask & TPM_INTF_DATA_AVAIL_INT) == TPM_INTF_DATA_AVAIL_INT) - status |= TPM_STS_DATA_AVAIL; - if ((irq_mask & TPM_INTF_CMD_READY_INT) == TPM_INTF_CMD_READY_INT) - status |= TPM_STS_COMMAND_READY; - - return status; -} /* status_to_interrupt() */ - -/* - * wait_for_stat wait for a TPM_STS value - * @param: chip, the tpm chip description - * @param: mask, the value mask to wait - * @param: timeout, the timeout - * @param: queue, the wait queue. - * @param: check_cancel, does the command can be cancelled ? - * @return: the tpm status, 0 if success, -ETIME if timeout is reached. - */ -static int wait_for_stat(struct tpm_chip *chip, u8 mask, unsigned long timeout, - wait_queue_head_t *queue, bool check_cancel) -{ - unsigned long stop; - int ret; - bool canceled = false; - bool condition; - u32 cur_intrs; - u8 interrupt, status; - struct tpm_stm_dev *tpm_dev; - - tpm_dev = (struct tpm_stm_dev *)TPM_VPRIV(chip); - - /* check current status */ - status = tpm_stm_i2c_status(chip); - if ((status & mask) == mask) - return 0; - - stop = jiffies + timeout; - - if (chip->vendor.irq) { - cur_intrs = tpm_dev->intrs; - interrupt = clear_interruption(tpm_dev); - enable_irq(chip->vendor.irq); - -again: - timeout = stop - jiffies; - if ((long) timeout <= 0) - return -1; - - ret = wait_event_interruptible_timeout(*queue, - cur_intrs != tpm_dev->intrs, timeout); - - interrupt |= clear_interruption(tpm_dev); - status = interrupt_to_status(interrupt); - condition = wait_for_tpm_stat_cond(chip, mask, - check_cancel, &canceled); - - if (ret >= 0 && condition) { - if (canceled) - return -ECANCELED; - return 0; - } - if (ret == -ERESTARTSYS && freezing(current)) { - clear_thread_flag(TIF_SIGPENDING); - goto again; - } - disable_irq_nosync(chip->vendor.irq); - - } else { - do { - msleep(TPM_TIMEOUT); - status = chip->ops->status(chip); - if ((status & mask) == mask) - return 0; - } while (time_before(jiffies, stop)); - } - - return -ETIME; -} /* wait_for_stat() */ - -/* - * recv_data receive data - * @param: chip, the tpm chip description - * @param: buf, the buffer where the data are received - * @param: count, the number of data to receive - * @return: the number of bytes read from TPM FIFO. - */ -static int recv_data(struct tpm_chip *chip, u8 *buf, size_t count) -{ - int size = 0, burstcnt, len, ret; - struct tpm_stm_dev *tpm_dev; - - tpm_dev = (struct tpm_stm_dev *)TPM_VPRIV(chip); - - while (size < count && - wait_for_stat(chip, - TPM_STS_DATA_AVAIL | TPM_STS_VALID, - chip->vendor.timeout_c, - &chip->vendor.read_queue, true) == 0) { - burstcnt = get_burstcount(chip); - if (burstcnt < 0) - return burstcnt; - len = min_t(int, burstcnt, count - size); - ret = I2C_READ_DATA(tpm_dev, TPM_DATA_FIFO, buf + size, len); - if (ret < 0) - return ret; - - size += len; - } - return size; -} - -/* - * tpm_ioserirq_handler the serirq irq handler - * @param: irq, the tpm chip description - * @param: dev_id, the description of the chip - * @return: the status of the handler. - */ -static irqreturn_t tpm_ioserirq_handler(int irq, void *dev_id) -{ - struct tpm_chip *chip = dev_id; - struct tpm_stm_dev *tpm_dev; - - tpm_dev = (struct tpm_stm_dev *)TPM_VPRIV(chip); - - tpm_dev->intrs++; - wake_up_interruptible(&chip->vendor.read_queue); - disable_irq_nosync(chip->vendor.irq); - - return IRQ_HANDLED; -} /* tpm_ioserirq_handler() */ - - -/* - * tpm_stm_i2c_send send TPM commands through the I2C bus. - * - * @param: chip, the tpm_chip description as specified in driver/char/tpm/tpm.h - * @param: buf, the buffer to send. - * @param: count, the number of bytes to send. - * @return: In case of success the number of bytes sent. - * In other case, a < 0 value describing the issue. - */ -static int tpm_stm_i2c_send(struct tpm_chip *chip, unsigned char *buf, - size_t len) -{ - u32 status, i, size; - int burstcnt = 0; - int ret; - u8 data; - struct i2c_client *client; - struct tpm_stm_dev *tpm_dev; - - if (!chip) - return -EBUSY; - if (len < TPM_HEADER_SIZE) - return -EBUSY; - - tpm_dev = (struct tpm_stm_dev *)TPM_VPRIV(chip); - client = tpm_dev->client; - - client->flags = 0; - - ret = request_locality(chip); - if (ret < 0) - return ret; - - status = tpm_stm_i2c_status(chip); - if ((status & TPM_STS_COMMAND_READY) == 0) { - tpm_stm_i2c_cancel(chip); - if (wait_for_stat - (chip, TPM_STS_COMMAND_READY, chip->vendor.timeout_b, - &chip->vendor.read_queue, false) < 0) { - ret = -ETIME; - goto out_err; - } - } - - for (i = 0; i < len - 1;) { - burstcnt = get_burstcount(chip); - if (burstcnt < 0) - return burstcnt; - size = min_t(int, len - i - 1, burstcnt); - ret = I2C_WRITE_DATA(tpm_dev, TPM_DATA_FIFO, buf + i, size); - if (ret < 0) - goto out_err; - - i += size; - } - - status = tpm_stm_i2c_status(chip); - if ((status & TPM_STS_DATA_EXPECT) == 0) { - ret = -EIO; - goto out_err; - } - - ret = I2C_WRITE_DATA(tpm_dev, TPM_DATA_FIFO, buf + len - 1, 1); - if (ret < 0) - goto out_err; - - status = tpm_stm_i2c_status(chip); - if ((status & TPM_STS_DATA_EXPECT) != 0) { - ret = -EIO; - goto out_err; - } - - data = TPM_STS_GO; - I2C_WRITE_DATA(tpm_dev, TPM_STS, &data, 1); - - return len; -out_err: - tpm_stm_i2c_cancel(chip); - release_locality(chip); - return ret; -} - -/* - * tpm_stm_i2c_recv received TPM response through the I2C bus. - * @param: chip, the tpm_chip description as specified in driver/char/tpm/tpm.h. - * @param: buf, the buffer to store datas. - * @param: count, the number of bytes to send. - * @return: In case of success the number of bytes received. - * In other case, a < 0 value describing the issue. - */ -static int tpm_stm_i2c_recv(struct tpm_chip *chip, unsigned char *buf, - size_t count) -{ - int size = 0; - int expected; - - if (!chip) - return -EBUSY; - - if (count < TPM_HEADER_SIZE) { - size = -EIO; - goto out; - } - - size = recv_data(chip, buf, TPM_HEADER_SIZE); - if (size < TPM_HEADER_SIZE) { - dev_err(chip->pdev, "Unable to read header\n"); - goto out; - } - - expected = be32_to_cpu(*(__be32 *)(buf + 2)); - if (expected > count) { - size = -EIO; - goto out; - } - - size += recv_data(chip, &buf[TPM_HEADER_SIZE], - expected - TPM_HEADER_SIZE); - if (size < expected) { - dev_err(chip->pdev, "Unable to read remainder of result\n"); - size = -ETIME; - goto out; - } - -out: - chip->ops->cancel(chip); - release_locality(chip); - return size; -} - -static bool tpm_stm_i2c_req_canceled(struct tpm_chip *chip, u8 status) -{ - return (status == TPM_STS_COMMAND_READY); -} - -static const struct tpm_class_ops st_i2c_tpm = { - .send = tpm_stm_i2c_send, - .recv = tpm_stm_i2c_recv, - .cancel = tpm_stm_i2c_cancel, - .status = tpm_stm_i2c_status, - .req_complete_mask = TPM_STS_DATA_AVAIL | TPM_STS_VALID, - .req_complete_val = TPM_STS_DATA_AVAIL | TPM_STS_VALID, - .req_canceled = tpm_stm_i2c_req_canceled, -}; - -#ifdef CONFIG_OF -static int tpm_stm_i2c_of_request_resources(struct tpm_chip *chip) -{ - struct device_node *pp; - struct tpm_stm_dev *tpm_dev = (struct tpm_stm_dev *)TPM_VPRIV(chip); - struct i2c_client *client = tpm_dev->client; - int gpio; - int ret; - - pp = client->dev.of_node; - if (!pp) { - dev_err(chip->pdev, "No platform data\n"); - return -ENODEV; - } - - /* Get GPIO from device tree */ - gpio = of_get_named_gpio(pp, "lpcpd-gpios", 0); - if (gpio < 0) { - dev_err(chip->pdev, "Failed to retrieve lpcpd-gpios from dts.\n"); - tpm_dev->io_lpcpd = -1; - /* - * lpcpd pin is not specified. This is not an issue as - * power management can be also managed by TPM specific - * commands. So leave with a success status code. - */ - return 0; - } - /* GPIO request and configuration */ - ret = devm_gpio_request_one(&client->dev, gpio, - GPIOF_OUT_INIT_HIGH, "TPM IO LPCPD"); - if (ret) { - dev_err(chip->pdev, "Failed to request lpcpd pin\n"); - return -ENODEV; - } - tpm_dev->io_lpcpd = gpio; - - return 0; -} -#else -static int tpm_stm_i2c_of_request_resources(struct tpm_chip *chip) -{ - return -ENODEV; -} -#endif - -static int tpm_stm_i2c_request_resources(struct i2c_client *client, - struct tpm_chip *chip) -{ - struct st33zp24_platform_data *pdata; - struct tpm_stm_dev *tpm_dev = (struct tpm_stm_dev *)TPM_VPRIV(chip); - int ret; - - pdata = client->dev.platform_data; - if (!pdata) { - dev_err(chip->pdev, "No platform data\n"); - return -ENODEV; - } - - /* store for late use */ - tpm_dev->io_lpcpd = pdata->io_lpcpd; - - if (gpio_is_valid(pdata->io_lpcpd)) { - ret = devm_gpio_request_one(&client->dev, - pdata->io_lpcpd, GPIOF_OUT_INIT_HIGH, - "TPM IO_LPCPD"); - if (ret) { - dev_err(chip->pdev, "%s : reset gpio_request failed\n", - __FILE__); - return ret; - } - } - - return 0; -} - -/* - * tpm_stm_i2c_probe initialize the TPM device - * @param: client, the i2c_client drescription (TPM I2C description). - * @param: id, the i2c_device_id struct. - * @return: 0 in case of success. - * -1 in other case. - */ -static int -tpm_stm_i2c_probe(struct i2c_client *client, const struct i2c_device_id *id) -{ - int ret; - u8 intmask = 0; - struct tpm_chip *chip; - struct st33zp24_platform_data *platform_data; - struct tpm_stm_dev *tpm_dev; - - if (!client) { - pr_info("%s: i2c client is NULL. Device not accessible.\n", - __func__); - return -ENODEV; - } - - if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { - dev_info(&client->dev, "client not i2c capable\n"); - return -ENODEV; - } - - tpm_dev = devm_kzalloc(&client->dev, sizeof(struct tpm_stm_dev), - GFP_KERNEL); - if (!tpm_dev) - return -ENOMEM; - - chip = tpmm_chip_alloc(&client->dev, &st_i2c_tpm); - if (IS_ERR(chip)) - return PTR_ERR(chip); - - TPM_VPRIV(chip) = tpm_dev; - tpm_dev->client = client; - - platform_data = client->dev.platform_data; - if (!platform_data && client->dev.of_node) { - ret = tpm_stm_i2c_of_request_resources(chip); - if (ret) - goto _tpm_clean_answer; - } else if (platform_data) { - ret = tpm_stm_i2c_request_resources(client, chip); - if (ret) - goto _tpm_clean_answer; - } - - chip->vendor.timeout_a = msecs_to_jiffies(TIS_SHORT_TIMEOUT); - chip->vendor.timeout_b = msecs_to_jiffies(TIS_LONG_TIMEOUT); - chip->vendor.timeout_c = msecs_to_jiffies(TIS_SHORT_TIMEOUT); - chip->vendor.timeout_d = msecs_to_jiffies(TIS_SHORT_TIMEOUT); - - chip->vendor.locality = LOCALITY0; - - if (client->irq) { - /* INTERRUPT Setup */ - init_waitqueue_head(&chip->vendor.read_queue); - tpm_dev->intrs = 0; - - if (request_locality(chip) != LOCALITY0) { - ret = -ENODEV; - goto _tpm_clean_answer; - } - - clear_interruption(tpm_dev); - ret = devm_request_irq(&client->dev, client->irq, - tpm_ioserirq_handler, - IRQF_TRIGGER_HIGH, - "TPM SERIRQ management", chip); - if (ret < 0) { - dev_err(chip->pdev, "TPM SERIRQ signals %d not available\n", - client->irq); - goto _tpm_clean_answer; - } - - intmask |= TPM_INTF_CMD_READY_INT - | TPM_INTF_STS_VALID_INT - | TPM_INTF_DATA_AVAIL_INT; - - ret = I2C_WRITE_DATA(tpm_dev, TPM_INT_ENABLE, &intmask, 1); - if (ret < 0) - goto _tpm_clean_answer; - - intmask = TPM_GLOBAL_INT_ENABLE; - ret = I2C_WRITE_DATA(tpm_dev, (TPM_INT_ENABLE + 3), - &intmask, 1); - if (ret < 0) - goto _tpm_clean_answer; - - chip->vendor.irq = client->irq; - - disable_irq_nosync(chip->vendor.irq); - - tpm_gen_interrupt(chip); - } - - tpm_get_timeouts(chip); - tpm_do_selftest(chip); - - return tpm_chip_register(chip); -_tpm_clean_answer: - dev_info(chip->pdev, "TPM I2C initialisation fail\n"); - return ret; -} - -/* - * tpm_stm_i2c_remove remove the TPM device - * @param: client, the i2c_client description (TPM I2C description). - * @return: 0 in case of success. - */ -static int tpm_stm_i2c_remove(struct i2c_client *client) -{ - struct tpm_chip *chip = - (struct tpm_chip *) i2c_get_clientdata(client); - - if (chip) - tpm_chip_unregister(chip); - - return 0; -} - -#ifdef CONFIG_PM_SLEEP -/* - * tpm_stm_i2c_pm_suspend suspend the TPM device - * @param: client, the i2c_client drescription (TPM I2C description). - * @param: mesg, the power management message. - * @return: 0 in case of success. - */ -static int tpm_stm_i2c_pm_suspend(struct device *dev) -{ - struct tpm_chip *chip = dev_get_drvdata(dev); - struct tpm_stm_dev *tpm_dev; - int ret = 0; - - tpm_dev = (struct tpm_stm_dev *)TPM_VPRIV(chip); - - if (gpio_is_valid(tpm_dev->io_lpcpd)) - gpio_set_value(tpm_dev->io_lpcpd, 0); - else - ret = tpm_pm_suspend(dev); - - return ret; -} /* tpm_stm_i2c_suspend() */ - -/* - * tpm_stm_i2c_pm_resume resume the TPM device - * @param: client, the i2c_client drescription (TPM I2C description). - * @return: 0 in case of success. - */ -static int tpm_stm_i2c_pm_resume(struct device *dev) -{ - struct tpm_chip *chip = dev_get_drvdata(dev); - struct tpm_stm_dev *tpm_dev; - int ret = 0; - - tpm_dev = (struct tpm_stm_dev *)TPM_VPRIV(chip); - - if (gpio_is_valid(tpm_dev->io_lpcpd)) { - gpio_set_value(tpm_dev->io_lpcpd, 1); - ret = wait_for_stat(chip, - TPM_STS_VALID, chip->vendor.timeout_b, - &chip->vendor.read_queue, false); - } else { - ret = tpm_pm_resume(dev); - if (!ret) - tpm_do_selftest(chip); - } - return ret; -} /* tpm_stm_i2c_pm_resume() */ -#endif - -static const struct i2c_device_id tpm_stm_i2c_id[] = { - {TPM_ST33_I2C, 0}, - {} -}; -MODULE_DEVICE_TABLE(i2c, tpm_stm_i2c_id); - -#ifdef CONFIG_OF -static const struct of_device_id of_st33zp24_i2c_match[] = { - { .compatible = "st,st33zp24-i2c", }, - {} -}; -MODULE_DEVICE_TABLE(of, of_st33zp24_i2c_match); -#endif - -static SIMPLE_DEV_PM_OPS(tpm_stm_i2c_ops, tpm_stm_i2c_pm_suspend, - tpm_stm_i2c_pm_resume); - -static struct i2c_driver tpm_stm_i2c_driver = { - .driver = { - .owner = THIS_MODULE, - .name = TPM_ST33_I2C, - .pm = &tpm_stm_i2c_ops, - .of_match_table = of_match_ptr(of_st33zp24_i2c_match), - }, - .probe = tpm_stm_i2c_probe, - .remove = tpm_stm_i2c_remove, - .id_table = tpm_stm_i2c_id -}; - -module_i2c_driver(tpm_stm_i2c_driver); - -MODULE_AUTHOR("Christophe Ricard (tpmsupport@st.com)"); -MODULE_DESCRIPTION("STM TPM I2C ST33 Driver"); -MODULE_VERSION("1.2.1"); -MODULE_LICENSE("GPL"); diff --git a/include/linux/platform_data/st33zp24.h b/include/linux/platform_data/st33zp24.h new file mode 100644 index 0000000..817dfdb --- /dev/null +++ b/include/linux/platform_data/st33zp24.h @@ -0,0 +1,28 @@ +/* + * STMicroelectronics TPM Linux driver for TPM 1.2 ST33ZP24 + * Copyright (C) 2009 - 2015 STMicroelectronics + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see . + */ +#ifndef __ST33ZP24_H__ +#define __ST33ZP24_H__ + +#define TPM_ST33_I2C "st33zp24-i2c" +#define TPM_ST33_SPI "st33zp24-spi" + +struct st33zp24_platform_data { + int io_lpcpd; +}; + +#endif /* __ST33ZP24_H__ */ diff --git a/include/linux/platform_data/tpm_stm_st33.h b/include/linux/platform_data/tpm_stm_st33.h deleted file mode 100644 index ff75310..0000000 --- a/include/linux/platform_data/tpm_stm_st33.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * STMicroelectronics TPM I2C Linux driver for TPM ST33ZP24 - * Copyright (C) 2009, 2010 STMicroelectronics - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see . - * - * STMicroelectronics version 1.2.0, Copyright (C) 2010 - * STMicroelectronics comes with ABSOLUTELY NO WARRANTY. - * This is free software, and you are welcome to redistribute it - * under certain conditions. - * - * @Author: Christophe RICARD tpmsupport@st.com - * - * @File: stm_st33_tpm.h - * - * @Date: 09/15/2010 - */ -#ifndef __STM_ST33_TPM_H__ -#define __STM_ST33_TPM_H__ - -#define TPM_ST33_I2C "st33zp24-i2c" -#define TPM_ST33_SPI "st33zp24-spi" - -struct st33zp24_platform_data { - int io_lpcpd; -}; - -#endif /* __STM_ST33_TPM_H__ */