| Message ID | 20230113101136.479-1-julien@xen.org (mailing list archive) |
|---|---|
| Headers | show |
| Series | xen/arm: Don't switch TTBR while the MMU is on | expand |
Hi, On 13/01/2023 10:11, Julien Grall wrote: > Julien Grall (14): > xen/arm64: flushtlb: Reduce scope of barrier for local TLB flush > xen/arm64: flushtlb: Implement the TLBI repeat workaround for TLB > flush by VA > xen/arm32: flushtlb: Reduce scope of barrier for local TLB flush > xen/arm: flushtlb: Reduce scope of barrier for the TLB range flush > xen/arm: Clean-up the memory layout > xen/arm32: head: Replace "ldr rX, =<label>" with "mov_w rX, <label>" > xen/arm32: head: Jump to the runtime mapping in enable_mmu() > xen/arm32: head: Introduce an helper to flush the TLBs > xen/arm32: head: Remove restriction where to load Xen I have committed up to this patch. I still need to go through the comments of the rest. > xen/arm32: head: Widen the use of the temporary mapping > xen/arm64: Rework the memory layout > xen/arm64: mm: Introduce helpers to prepare/enable/disable the > identity mapping > xen/arm64: mm: Rework switch_ttbr() > xen/arm64: smpboot: Directly switch to the runtime page-tables > Cheers,
From: Julien Grall <jgrall@amazon.com> Hi all, Currently, Xen on Arm will switch TTBR whilst the MMU is on. This is similar to replacing existing mappings with new ones. So we need to follow a break-before-make sequence. When switching the TTBR, we need to temporarily disable the MMU before updating the TTBR. This means the page-tables must contain an identity mapping. The current memory layout is not very flexible and has an higher chance to clash with the identity mapping. On Arm64, we have plenty of unused virtual address space Therefore, we can simply reshuffle the layout to leave the first part of the virtual address space empty. On Arm32, the virtual address space is already quite full. Even if we find space, it would be necessary to have a dynamic layout. So a different approach will be necessary. The chosen one is to have a temporary mapping that will be used to jumped from the ID mapping to the runtime mapping (or vice versa). The temporary mapping will be overlapping with the domheap area as it should not be used when switching on/off the MMU. The Arm32 part is not yet addressed and will be handled in a follow-up series. After this series, most of Xen page-table code should be compliant with the Arm Arm. The last two issues I am aware of are: - domheap: Mappings are replaced without using the Break-Before-Make approach. - The cache is not cleaned/invalidated when updating the page-tables with Data cache off (like during early boot). The long term plan is to get rid of boot_* page tables and then directly use the runtime pages. This means for coloring, we will need to build the pages in the relocated Xen rather than the current Xen. For convience, I pushed a branch with everything applied: https://xenbits.xen.org/git-http/people/julieng/xen-unstable.git branch boot-pt-rework-v4 Cheers, Julien Grall (14): xen/arm64: flushtlb: Reduce scope of barrier for local TLB flush xen/arm64: flushtlb: Implement the TLBI repeat workaround for TLB flush by VA xen/arm32: flushtlb: Reduce scope of barrier for local TLB flush xen/arm: flushtlb: Reduce scope of barrier for the TLB range flush xen/arm: Clean-up the memory layout xen/arm32: head: Replace "ldr rX, =<label>" with "mov_w rX, <label>" xen/arm32: head: Jump to the runtime mapping in enable_mmu() xen/arm32: head: Introduce an helper to flush the TLBs xen/arm32: head: Remove restriction where to load Xen xen/arm32: head: Widen the use of the temporary mapping xen/arm64: Rework the memory layout xen/arm64: mm: Introduce helpers to prepare/enable/disable the identity mapping xen/arm64: mm: Rework switch_ttbr() xen/arm64: smpboot: Directly switch to the runtime page-tables xen/arch/arm/arm32/head.S | 283 ++++++++++++++-------- xen/arch/arm/arm32/smpboot.c | 4 + xen/arch/arm/arm64/Makefile | 1 + xen/arch/arm/arm64/head.S | 82 ++++--- xen/arch/arm/arm64/mm.c | 160 ++++++++++++ xen/arch/arm/arm64/smpboot.c | 15 +- xen/arch/arm/include/asm/arm32/flushtlb.h | 27 ++- xen/arch/arm/include/asm/arm32/mm.h | 4 + xen/arch/arm/include/asm/arm64/flushtlb.h | 56 +++-- xen/arch/arm/include/asm/arm64/mm.h | 13 + xen/arch/arm/include/asm/config.h | 72 ++++-- xen/arch/arm/include/asm/flushtlb.h | 10 +- xen/arch/arm/include/asm/mm.h | 2 + xen/arch/arm/include/asm/setup.h | 11 + xen/arch/arm/include/asm/smp.h | 1 + xen/arch/arm/mm.c | 33 ++- xen/arch/arm/smpboot.c | 1 + 17 files changed, 566 insertions(+), 209 deletions(-) create mode 100644 xen/arch/arm/arm64/mm.c