@@ -209,6 +209,7 @@ endif
head-y := arch/x86/kernel/head_$(BITS).o
head-y += arch/x86/kernel/head$(BITS).o
head-y += arch/x86/kernel/head.o
+head-y += arch/x86/kernel/platform-quirks.o
libs-y += arch/x86/lib/
@@ -20,12 +20,6 @@ static inline int paravirt_enabled(void)
return pv_info.paravirt_enabled;
}
-static inline int paravirt_has_feature(unsigned int feature)
-{
- WARN_ON_ONCE(!pv_info.paravirt_enabled);
- return (pv_info.features & feature);
-}
-
static inline void load_sp0(struct tss_struct *tss,
struct thread_struct *thread)
{
@@ -70,14 +70,9 @@ struct pv_info {
#endif
int paravirt_enabled;
- unsigned int features; /* valid only if paravirt_enabled is set */
const char *name;
};
-#define paravirt_has(x) paravirt_has_feature(PV_SUPPORTED_##x)
-/* Supported features */
-#define PV_SUPPORTED_RTC (1<<0)
-
struct pv_init_ops {
/*
* Patch may replace one of the defined code sequences with
@@ -474,7 +474,6 @@ static inline unsigned long current_top_of_stack(void)
#else
#define __cpuid native_cpuid
#define paravirt_enabled() 0
-#define paravirt_has(x) 0
static inline void load_sp0(struct tss_struct *tss,
struct thread_struct *thread)
@@ -142,6 +142,15 @@ struct x86_cpuinit_ops {
struct timespec;
/**
+ * struct x86_legacy_features - legacy x86 features
+ *
+ * @rtc: this device has a CMOS real-time clock present
+ */
+struct x86_legacy_features {
+ int rtc;
+};
+
+/**
* struct x86_platform_ops - platform specific runtime functions
* @calibrate_tsc: calibrate TSC
* @get_wallclock: get time from HW clock like RTC etc.
@@ -152,6 +161,14 @@ struct timespec;
* @save_sched_clock_state: save state for sched_clock() on suspend
* @restore_sched_clock_state: restore state for sched_clock() on resume
* @apic_post_init: adjust apic if neeeded
+ * @legacy: legacy features
+ * @set_legacy_features: override legacy features. Use of this callback
+ * is highly discouraged. You should only need
+ * this if your hardware platform requires further
+ * custom fine tuning far beyong what may be
+ * possible in x86_early_init_platform_quirks() by
+ * only using the current x86_hardware_subarch
+ * semantics.
*/
struct x86_platform_ops {
unsigned long (*calibrate_tsc)(void);
@@ -165,6 +182,8 @@ struct x86_platform_ops {
void (*save_sched_clock_state)(void);
void (*restore_sched_clock_state)(void);
void (*apic_post_init)(void);
+ struct x86_legacy_features legacy;
+ void (*set_legacy_features)(void);
};
struct pci_dev;
@@ -186,6 +205,8 @@ extern struct x86_cpuinit_ops x86_cpuinit;
extern struct x86_platform_ops x86_platform;
extern struct x86_msi_ops x86_msi;
extern struct x86_io_apic_ops x86_io_apic_ops;
+
+extern void x86_early_init_platform_quirks(void);
extern void x86_init_noop(void);
extern void x86_init_uint_noop(unsigned int unused);
@@ -2,7 +2,11 @@
# Makefile for the linux kernel.
#
-extra-y := head_$(BITS).o head$(BITS).o head.o vmlinux.lds
+extra-y := head_$(BITS).o
+extra-y += head$(BITS).o
+extra-y += head.o
+extra-y += platform-quirks.o
+extra-y += vmlinux.lds
CPPFLAGS_vmlinux.lds += -U$(UTS_MACHINE)
@@ -34,6 +34,8 @@ asmlinkage __visible void __init i386_start_kernel(void)
cr4_init_shadow();
sanitize_boot_params(&boot_params);
+ x86_early_init_platform_quirks();
+
/* Call the subarch specific early setup function */
switch (boot_params.hdr.hardware_subarch) {
case X86_SUBARCH_INTEL_MID:
@@ -182,6 +182,7 @@ void __init x86_64_start_reservations(char *real_mode_data)
if (!boot_params.hdr.version)
copy_bootdata(__va(real_mode_data));
+ x86_early_init_platform_quirks();
reserve_ebda_region();
switch (boot_params.hdr.hardware_subarch) {
new file mode 100644
@@ -0,0 +1,21 @@
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/setup.h>
+#include <asm/bios_ebda.h>
+
+void __init x86_early_init_platform_quirks(void)
+{
+ x86_platform.legacy.rtc = 1;
+
+ switch (boot_params.hdr.hardware_subarch) {
+ case X86_SUBARCH_XEN:
+ case X86_SUBARCH_LGUEST:
+ case X86_SUBARCH_INTEL_MID:
+ x86_platform.legacy.rtc = 0;
+ break;
+ }
+
+ if (x86_platform.set_legacy_features)
+ x86_platform.set_legacy_features();
+}
@@ -14,6 +14,7 @@
#include <asm/time.h>
#include <asm/intel-mid.h>
#include <asm/rtc.h>
+#include <asm/setup.h>
#ifdef CONFIG_X86_32
/*
@@ -188,10 +189,6 @@ static __init int add_rtc_cmos(void)
if (of_have_populated_dt())
return 0;
- /* Intel MID platforms don't have ioport rtc */
- if (intel_mid_identify_cpu())
- return -ENODEV;
-
#ifdef CONFIG_ACPI
if (acpi_gbl_FADT.boot_flags & ACPI_FADT_NO_CMOS_RTC) {
/* This warning can likely go away again in a year or two. */
@@ -200,7 +197,7 @@ static __init int add_rtc_cmos(void)
}
#endif
- if (paravirt_enabled() && !paravirt_has(RTC))
+ if (!x86_platform.legacy.rtc)
return -ENODEV;
platform_device_register(&rtc_device);
@@ -1414,7 +1414,6 @@ __init void lguest_init(void)
pv_info.kernel_rpl = 1;
/* Everyone except Xen runs with this set. */
pv_info.shared_kernel_pmd = 1;
- pv_info.features = 0;
/*
* We set up all the lguest overrides for sensitive operations. These
@@ -1192,7 +1192,6 @@ static const struct pv_info xen_info __initconst = {
#ifdef CONFIG_X86_64
.extra_user_64bit_cs = FLAT_USER_CS64,
#endif
- .features = 0,
.name = "Xen",
};
@@ -1505,6 +1504,11 @@ static void __init xen_pvh_early_guest_init(void)
}
#endif /* CONFIG_XEN_PVH */
+static void xen_dom0_set_legacy_features(void)
+{
+ x86_platform.legacy.rtc = 1;
+}
+
/* First C function to be called on Xen boot */
asmlinkage __visible void __init xen_start_kernel(void)
{
@@ -1525,8 +1529,6 @@ asmlinkage __visible void __init xen_start_kernel(void)
/* Install Xen paravirt ops */
pv_info = xen_info;
- if (xen_initial_domain())
- pv_info.features |= PV_SUPPORTED_RTC;
pv_init_ops = xen_init_ops;
if (!xen_pvh_domain()) {
pv_cpu_ops = xen_cpu_ops;
@@ -1679,6 +1681,8 @@ asmlinkage __visible void __init xen_start_kernel(void)
.u.firmware_info.type = XEN_FW_KBD_SHIFT_FLAGS,
};
+ x86_platform.set_legacy_features =
+ xen_dom0_set_legacy_features;
xen_init_vga(info, xen_start_info->console.dom0.info_size);
xen_start_info->console.domU.mfn = 0;
xen_start_info->console.domU.evtchn = 0;
We have 4 types of x86 platforms that disable RTC: * Intel MID * Lguest - uses paravirt * Xen dom-U - uses paravirt * x86 on legacy systems annotated with an ACPI legacy flag We can consolidate all of these into a platform specific legacy quirk set early in boot through i386_start_kernel() and through x86_64_start_reservations(). This deals with the RTC quirks which we can rely on through the hardware subarch, the ACPI check can be dealt with separately. For Xen things are bit more complex given that the @X86_SUBARCH_XEN x86_hardware_subarch is shared on for Xen which uses the PV path for both domU and dom0. Since the semantics for differentiating between the two are Xen specific we provide a platform helper to help override default legacy features -- x86_platform.set_legacy_features(). Use of this helper is highly discouraged, its only purpose should be to account for the lack of semantics available within your given x86_hardware_subarch. As per 0-day, this bumps the vmlinux size using i386-tinyconfig as follows: TOTAL TEXT init.text x86_early_init_platform_quirks() +70 +62 +62 +43 Only 8 bytes overhead total, as the main increase in size is all removed via __init. v2: split the subarch check from the ACPI check, clarify on the ACPI change commit log why ordering works v3: add x86_platform.set_legacy_features() to account for dom0, add also size impact on vmlinux as per 0-day report Suggested-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org> --- arch/x86/Makefile | 1 + arch/x86/include/asm/paravirt.h | 6 ------ arch/x86/include/asm/paravirt_types.h | 5 ----- arch/x86/include/asm/processor.h | 1 - arch/x86/include/asm/x86_init.h | 21 +++++++++++++++++++++ arch/x86/kernel/Makefile | 6 +++++- arch/x86/kernel/head32.c | 2 ++ arch/x86/kernel/head64.c | 1 + arch/x86/kernel/platform-quirks.c | 21 +++++++++++++++++++++ arch/x86/kernel/rtc.c | 7 ++----- arch/x86/lguest/boot.c | 1 - arch/x86/xen/enlighten.c | 10 +++++++--- 12 files changed, 60 insertions(+), 22 deletions(-) create mode 100644 arch/x86/kernel/platform-quirks.c