[v15,09/10] x86/boot: rename sym_phys() to sym_offs()

Commit Message

Daniel Kiper Feb. 14, 2017, 6:33 p.m. UTC

This way macro name better describes its function.
Currently it is used to calculate symbol offset in
relation to the beginning of Xen image mapping.
However, value returned by sym_offs() for a given
symbol is not always equal its physical address.

There is no functional change.

Suggested-by: Jan Beulich <[e-mail]>
Signed-off-by: Daniel Kiper <[e-mail]>
Acked-by: Jan Beulich <[e-mail]>
Reviewed-by: Doug Goldstein <[e-mail]>
---
v8 - suggestions/fixes:
   - improve commit message
     (suggested by Jan Beulich).
---
 xen/arch/x86/boot/head.S       |   38 +++++++++++++++++++-------------------
 xen/arch/x86/boot/trampoline.S |    2 +-
 xen/arch/x86/boot/wakeup.S     |    4 ++--
 xen/arch/x86/boot/x86_64.S     |   18 +++++++++---------
 4 files changed, 31 insertions(+), 31 deletions(-)

Patch

diff --git a/xen/arch/x86/boot/head.S b/xen/arch/x86/boot/head.S
index 4fbf776..ebcc28b 100644
--- a/xen/arch/x86/boot/head.S
+++ b/xen/arch/x86/boot/head.S
@@ -12,9 +12,9 @@ 
         .text
         .code32
 
-#define sym_phys(sym)     ((sym) - __XEN_VIRT_START)
-#define sym_esi(sym)      sym_phys(sym)(%esi)
-#define sym_fs(sym)       %fs:sym_phys(sym)
+#define sym_offs(sym)     ((sym) - __XEN_VIRT_START)
+#define sym_esi(sym)      sym_offs(sym)(%esi)
+#define sym_fs(sym)       %fs:sym_offs(sym)
 
 #define BOOT_CS32        0x0008
 #define BOOT_CS64        0x0010
@@ -97,7 +97,7 @@  multiboot2_header_start:
 
         /* EFI64 Multiboot2 entry point. */
         mb2ht_init MB2_HT(ENTRY_ADDRESS_EFI64), MB2_HT(OPTIONAL), \
-                   sym_phys(__efi64_mb2_start)
+                   sym_offs(__efi64_mb2_start)
 
         /* Multiboot2 header end tag. */
         mb2ht_init MB2_HT(END), MB2_HT(REQUIRED)
@@ -119,7 +119,7 @@  multiboot2_header_start:
 gdt_boot_descr:
         .word   7*8-1
 gdt_boot_base:
-        .long   sym_phys(trampoline_gdt)
+        .long   sym_offs(trampoline_gdt)
         .long   0 /* Needed for 64-bit lgdt */
 
 vga_text_buffer:
@@ -131,23 +131,23 @@  efi_platform:
         .section .init.text, "ax", @progbits
 
 bad_cpu:
-        add     $sym_phys(.Lbad_cpu_msg),%esi   # Error message
+        add     $sym_offs(.Lbad_cpu_msg),%esi   # Error message
         jmp     .Lget_vtb
 not_multiboot:
-        add     $sym_phys(.Lbad_ldr_msg),%esi   # Error message
+        add     $sym_offs(.Lbad_ldr_msg),%esi   # Error message
         jmp     .Lget_vtb
 .Lmb2_no_st:
-        add     $sym_phys(.Lbad_ldr_nst),%esi   # Error message
+        add     $sym_offs(.Lbad_ldr_nst),%esi   # Error message
         jmp     .Lget_vtb
 .Lmb2_no_ih:
-        add     $sym_phys(.Lbad_ldr_nih),%esi   # Error message
+        add     $sym_offs(.Lbad_ldr_nih),%esi   # Error message
         jmp     .Lget_vtb
 .Lmb2_no_bs:
-        add     $sym_phys(.Lbad_ldr_nbs),%esi   # Error message
+        add     $sym_offs(.Lbad_ldr_nbs),%esi   # Error message
         xor     %edi,%edi                       # No VGA text buffer
         jmp     .Lsend_chr
 .Lmb2_efi_ia_32:
-        add     $sym_phys(.Lbad_efi_msg),%esi   # Error message
+        add     $sym_offs(.Lbad_efi_msg),%esi   # Error message
         xor     %edi,%edi                       # No VGA text buffer
         jmp     .Lsend_chr
 .Lget_vtb:
@@ -358,7 +358,7 @@  __start:
         cli
 
         /* Load default Xen image load base address. */
-        mov     $sym_phys(__image_base__),%esi
+        mov     $sym_offs(__image_base__),%esi
 
         /* Bootloaders may set multiboot{1,2}.mem_lower to a nonzero value. */
         xor     %edx,%edx
@@ -538,8 +538,8 @@  trampoline_setup:
         jnz     1f
 
         /* Initialize BSS (no nasty surprises!). */
-        mov     $sym_phys(__bss_start),%edi
-        mov     $sym_phys(__bss_end),%ecx
+        mov     $sym_offs(__bss_start),%edi
+        mov     $sym_offs(__bss_end),%ecx
         push    %fs
         pop     %es
         sub     %edi,%ecx
@@ -612,22 +612,22 @@  trampoline_setup:
 
         /* Apply relocations to bootstrap trampoline. */
         mov     sym_fs(trampoline_phys),%edx
-        mov     $sym_phys(__trampoline_rel_start),%edi
+        mov     $sym_offs(__trampoline_rel_start),%edi
 1:
         mov     %fs:(%edi),%eax
         add     %edx,%fs:(%edi,%eax)
         add     $4,%edi
-        cmp     $sym_phys(__trampoline_rel_stop),%edi
+        cmp     $sym_offs(__trampoline_rel_stop),%edi
         jb      1b
 
         /* Patch in the trampoline segment. */
         shr     $4,%edx
-        mov     $sym_phys(__trampoline_seg_start),%edi
+        mov     $sym_offs(__trampoline_seg_start),%edi
 1:
         mov     %fs:(%edi),%eax
         mov     %dx,%fs:(%edi,%eax)
         add     $4,%edi
-        cmp     $sym_phys(__trampoline_seg_stop),%edi
+        cmp     $sym_offs(__trampoline_seg_stop),%edi
         jb      1b
 
         /* Do not parse command line on EFI platform here. */
@@ -653,7 +653,7 @@  trampoline_setup:
         push    %eax
 
         /* Copy bootstrap trampoline to low memory, below 1MB. */
-        mov     $sym_phys(trampoline_start),%esi
+        mov     $sym_offs(trampoline_start),%esi
         mov     $((trampoline_end - trampoline_start) / 4),%ecx
         rep movsl %fs:(%esi),%es:(%edi)
 
diff --git a/xen/arch/x86/boot/trampoline.S b/xen/arch/x86/boot/trampoline.S
index 64f8efd..b96607a 100644
--- a/xen/arch/x86/boot/trampoline.S
+++ b/xen/arch/x86/boot/trampoline.S
@@ -92,7 +92,7 @@  trampoline_protmode_entry:
         mov     %ecx,%cr4
 
         /* Load pagetable base register. */
-        mov     $sym_phys(idle_pg_table),%eax
+        mov     $sym_offs(idle_pg_table),%eax
         add     bootsym_rel(trampoline_xen_phys_start,4,%eax)
         mov     %eax,%cr3
 
diff --git a/xen/arch/x86/boot/wakeup.S b/xen/arch/x86/boot/wakeup.S
index 08ea9b2..42d57ab 100644
--- a/xen/arch/x86/boot/wakeup.S
+++ b/xen/arch/x86/boot/wakeup.S
@@ -120,7 +120,7 @@  wakeup_32:
         mov     $bootsym_rel(wakeup_stack, 4, %esp)
 
         # check saved magic again
-        mov     $sym_phys(saved_magic), %eax
+        mov     $sym_offs(saved_magic),%eax
         add     bootsym_rel(trampoline_xen_phys_start, 4, %eax)
         mov     (%eax), %eax
         cmp     $0x9abcdef0, %eax
@@ -133,7 +133,7 @@  wakeup_32:
         mov     %ecx, %cr4
 
         /* Load pagetable base register */
-        mov     $sym_phys(idle_pg_table),%eax
+        mov     $sym_offs(idle_pg_table),%eax
         add     bootsym_rel(trampoline_xen_phys_start,4,%eax)
         mov     %eax,%cr3
 
diff --git a/xen/arch/x86/boot/x86_64.S b/xen/arch/x86/boot/x86_64.S
index d07c360..b6f2792 100644
--- a/xen/arch/x86/boot/x86_64.S
+++ b/xen/arch/x86/boot/x86_64.S
@@ -112,7 +112,7 @@  GLOBAL(__page_tables_start)
  * actualy mapped (mostly using superpages).  Uses 4x 4k pages.
  */
 GLOBAL(l2_identmap)
-        .quad sym_phys(l1_identmap) + __PAGE_HYPERVISOR
+        .quad sym_offs(l1_identmap) + __PAGE_HYPERVISOR
         idx = 1
         .rept 7
         .quad (idx << L2_PAGETABLE_SHIFT) | PAGE_HYPERVISOR | _PAGE_PSE
@@ -130,7 +130,7 @@  GLOBAL(l2_xenmap)
         .quad 0
         idx = 1
         .rept 7
-        .quad sym_phys(__image_base__) + (idx << L2_PAGETABLE_SHIFT) + (PAGE_HYPERVISOR | _PAGE_PSE)
+        .quad sym_offs(__image_base__) + (idx << L2_PAGETABLE_SHIFT) + (PAGE_HYPERVISOR | _PAGE_PSE)
         idx = idx + 1
         .endr
         .fill L2_PAGETABLE_ENTRIES - 8, 8, 0
@@ -141,7 +141,7 @@  l2_fixmap:
         idx = 0
         .rept L2_PAGETABLE_ENTRIES
         .if idx == l2_table_offset(FIXADDR_TOP - 1)
-        .quad sym_phys(l1_fixmap) + __PAGE_HYPERVISOR
+        .quad sym_offs(l1_fixmap) + __PAGE_HYPERVISOR
         .else
         .quad 0
         .endif
@@ -153,7 +153,7 @@  l2_fixmap:
 l3_identmap:
         idx = 0
         .rept 4
-        .quad sym_phys(l2_identmap) + (idx << PAGE_SHIFT) + __PAGE_HYPERVISOR
+        .quad sym_offs(l2_identmap) + (idx << PAGE_SHIFT) + __PAGE_HYPERVISOR
         idx = idx + 1
         .endr
         .fill L3_PAGETABLE_ENTRIES - 4, 8, 0
@@ -164,9 +164,9 @@  l3_xenmap:
         idx = 0
         .rept L3_PAGETABLE_ENTRIES
         .if idx == l3_table_offset(XEN_VIRT_START)
-        .quad sym_phys(l2_xenmap) + __PAGE_HYPERVISOR
+        .quad sym_offs(l2_xenmap) + __PAGE_HYPERVISOR
         .elseif idx == l3_table_offset(FIXADDR_TOP - 1)
-        .quad sym_phys(l2_fixmap) + __PAGE_HYPERVISOR
+        .quad sym_offs(l2_fixmap) + __PAGE_HYPERVISOR
         .else
         .quad 0
         .endif
@@ -176,13 +176,13 @@  l3_xenmap:
 
 /* Top-level master (and idle-domain) page directory. */
 GLOBAL(idle_pg_table)
-        .quad sym_phys(l3_bootmap) + __PAGE_HYPERVISOR
+        .quad sym_offs(l3_bootmap) + __PAGE_HYPERVISOR
         idx = 1
         .rept L4_PAGETABLE_ENTRIES - 1
         .if idx == l4_table_offset(DIRECTMAP_VIRT_START)
-        .quad sym_phys(l3_identmap) + __PAGE_HYPERVISOR
+        .quad sym_offs(l3_identmap) + __PAGE_HYPERVISOR
         .elseif idx == l4_table_offset(XEN_VIRT_START)
-        .quad sym_phys(l3_xenmap) + __PAGE_HYPERVISOR
+        .quad sym_offs(l3_xenmap) + __PAGE_HYPERVISOR
         .else
         .quad 0
         .endif