@@ -847,9 +847,10 @@ SYM_ENTRY(__begin_SYSENTER_singlestep_region, SYM_L_GLOBAL, SYM_A_NONE)
* Xen doesn't set %esp to be precisely what the normal SYSENTER
* entry point expects, so fix it up before using the normal path.
*/
-ENTRY(xen_sysenter_target)
+SYM_CODE_START(xen_sysenter_target)
addl $5*4, %esp /* remove xen-provided frame */
jmp .Lsysenter_past_esp
+SYM_CODE_END(xen_sysenter_target)
#endif
/*
@@ -9,8 +9,7 @@
.code32
ALIGN
-ENTRY(wakeup_pmode_return)
-wakeup_pmode_return:
+SYM_CODE_START(wakeup_pmode_return)
movw $__KERNEL_DS, %ax
movw %ax, %ss
movw %ax, %fs
@@ -39,6 +38,7 @@ wakeup_pmode_return:
# jump to place where we left off
movl saved_eip, %eax
jmp *%eax
+SYM_CODE_END(wakeup_pmode_return)
bogus_magic:
jmp bogus_magic
@@ -72,7 +72,7 @@ restore_registers:
popfl
ret
-ENTRY(do_suspend_lowlevel)
+SYM_CODE_START(do_suspend_lowlevel)
call save_processor_state
call save_registers
pushl $3
@@ -87,6 +87,7 @@ ret_point:
call restore_registers
call restore_processor_state
ret
+SYM_CODE_END(do_suspend_lowlevel)
.data
ALIGN
@@ -89,7 +89,7 @@ WEAK(ftrace_stub)
ret
END(ftrace_caller)
-ENTRY(ftrace_regs_caller)
+SYM_CODE_START(ftrace_regs_caller)
/*
* We're here from an mcount/fentry CALL, and the stack frame looks like:
*
@@ -163,6 +163,7 @@ SYM_INNER_LABEL(ftrace_regs_call, SYM_L_GLOBAL)
popl %eax
jmp .Lftrace_ret
+SYM_CODE_END(ftrace_regs_caller)
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
ENTRY(ftrace_graph_caller)
@@ -64,7 +64,7 @@ RESERVE_BRK(pagetables, INIT_MAP_SIZE)
* can.
*/
__HEAD
-ENTRY(startup_32)
+SYM_CODE_START(startup_32)
movl pa(initial_stack),%ecx
/* test KEEP_SEGMENTS flag to see if the bootloader is asking
@@ -172,6 +172,7 @@ num_subarch_entries = (. - subarch_entries) / 4
#else
jmp .Ldefault_entry
#endif /* CONFIG_PARAVIRT */
+SYM_CODE_END(startup_32)
#ifdef CONFIG_HOTPLUG_CPU
/*
@@ -35,7 +35,7 @@ ENTRY(swsusp_arch_suspend)
ret
ENDPROC(swsusp_arch_suspend)
-ENTRY(restore_image)
+SYM_CODE_START(restore_image)
/* prepare to jump to the image kernel */
movl restore_jump_address, %ebx
movl restore_cr3, %ebp
@@ -45,9 +45,10 @@ ENTRY(restore_image)
/* jump to relocated restore code */
movl relocated_restore_code, %eax
jmpl *%eax
+SYM_CODE_END(restore_image)
/* code below has been relocated to a safe page */
-ENTRY(core_restore_code)
+SYM_CODE_START(core_restore_code)
movl temp_pgt, %eax
movl %eax, %cr3
@@ -77,6 +78,7 @@ copy_loop:
done:
jmpl *%ebx
+SYM_CODE_END(core_restore_code)
/* code below belongs to the image kernel */
.align PAGE_SIZE
@@ -29,7 +29,7 @@
.code16
.balign PAGE_SIZE
-ENTRY(trampoline_start)
+SYM_CODE_START(trampoline_start)
wbinvd # Needed for NUMA-Q should be harmless for others
LJMPW_RM(1f)
@@ -54,11 +54,13 @@ ENTRY(trampoline_start)
lmsw %dx # into protected mode
ljmpl $__BOOT_CS, $pa_startup_32
+SYM_CODE_END(trampoline_start)
.section ".text32","ax"
.code32
-ENTRY(startup_32) # note: also used from wakeup_asm.S
+SYM_CODE_START(startup_32) # note: also used from wakeup_asm.S
jmp *%eax
+SYM_CODE_END(startup_32)
.bss
.balign 8
@@ -56,7 +56,7 @@
_ASM_EXTABLE(1b,2b)
.endm
-ENTRY(xen_iret)
+SYM_CODE_START(xen_iret)
/* test eflags for special cases */
testl $(X86_EFLAGS_VM | XEN_EFLAGS_NMI), 8(%esp)
jnz hyper_iret
@@ -122,6 +122,7 @@ xen_iret_end_crit:
hyper_iret:
/* put this out of line since its very rarely used */
jmp hypercall_page + __HYPERVISOR_iret * 32
+SYM_CODE_END(xen_iret)
.globl xen_iret_start_crit, xen_iret_end_crit
@@ -165,7 +166,7 @@ hyper_iret:
* SAVE_ALL state before going on, since it's usermode state which we
* eventually need to restore.
*/
-ENTRY(xen_iret_crit_fixup)
+SYM_CODE_START(xen_iret_crit_fixup)
/*
* Paranoia: Make sure we're really coming from kernel space.
* One could imagine a case where userspace jumps into the
@@ -204,4 +205,4 @@ ENTRY(xen_iret_crit_fixup)
lea 4(%edi), %esp /* point esp to new frame */
2: jmp xen_do_upcall
-
+SYM_CODE_END(xen_iret_crit_fixup)