| Message ID | 20170630155431.23824-10-julien.grall@arm.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Julien, On 06/30/2017 05:54 PM, Julien Grall wrote: > page.h is getting bigger. Move out every LPAE definitions in a separate > header. There is no functional changes. > > Signed-off-by: Julien Grall <julien.grall@arm.com> > Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> > > --- > > Cc: proskurin@sec.in.tum.de > > Changes in v2: > - Move comment after the #endif rather than before > - Add Stefano's reviewed-by Reviewed-by: Sergej Proskurin <proskurin@sec.in.tum.de> > --- > xen/include/asm-arm/lpae.h | 169 +++++++++++++++++++++++++++++++++++++++++++++ > xen/include/asm-arm/page.h | 152 +--------------------------------------- > 2 files changed, 170 insertions(+), 151 deletions(-) > create mode 100644 xen/include/asm-arm/lpae.h > > diff --git a/xen/include/asm-arm/lpae.h b/xen/include/asm-arm/lpae.h > new file mode 100644 > index 0000000000..ad8c571ea5 > --- /dev/null > +++ b/xen/include/asm-arm/lpae.h > @@ -0,0 +1,169 @@ > +#ifndef __ARM_LPAE_H__ > +#define __ARM_LPAE_H__ > + > +#ifndef __ASSEMBLY__ > + > +/* WARNING! Unlike the Intel pagetable code, where l1 is the lowest > + * level and l4 is the root of the trie, the ARM pagetables follow ARM's > + * documentation: the levels are called first, second &c in the order > + * that the MMU walks them (i.e. "first" is the root of the trie). */ > + > +/****************************************************************************** > + * ARMv7-A LPAE pagetables: 3-level trie, mapping 40-bit input to > + * 40-bit output addresses. Tables at all levels have 512 64-bit entries > + * (i.e. are 4Kb long). > + * > + * The bit-shuffling that has the permission bits in branch nodes in a > + * different place from those in leaf nodes seems to be to allow linear > + * pagetable tricks. If we're not doing that then the set of permission > + * bits that's not in use in a given node type can be used as > + * extra software-defined bits. */ > + > +typedef struct __packed { > + /* These are used in all kinds of entry. */ > + unsigned long valid:1; /* Valid mapping */ > + unsigned long table:1; /* == 1 in 4k map entries too */ > + > + /* These ten bits are only used in Block entries and are ignored > + * in Table entries. */ > + unsigned long ai:3; /* Attribute Index */ > + unsigned long ns:1; /* Not-Secure */ > + unsigned long user:1; /* User-visible */ > + unsigned long ro:1; /* Read-Only */ > + unsigned long sh:2; /* Shareability */ > + unsigned long af:1; /* Access Flag */ > + unsigned long ng:1; /* Not-Global */ > + > + /* The base address must be appropriately aligned for Block entries */ > + unsigned long long base:36; /* Base address of block or next table */ > + unsigned long sbz:4; /* Must be zero */ > + > + /* These seven bits are only used in Block entries and are ignored > + * in Table entries. */ > + unsigned long contig:1; /* In a block of 16 contiguous entries */ > + unsigned long pxn:1; /* Privileged-XN */ > + unsigned long xn:1; /* eXecute-Never */ > + unsigned long avail:4; /* Ignored by hardware */ > + > + /* These 5 bits are only used in Table entries and are ignored in > + * Block entries */ > + unsigned long pxnt:1; /* Privileged-XN */ > + unsigned long xnt:1; /* eXecute-Never */ > + unsigned long apt:2; /* Access Permissions */ > + unsigned long nst:1; /* Not-Secure */ > +} lpae_pt_t; > + > +/* The p2m tables have almost the same layout, but some of the permission > + * and cache-control bits are laid out differently (or missing) */ > +typedef struct __packed { > + /* These are used in all kinds of entry. */ > + unsigned long valid:1; /* Valid mapping */ > + unsigned long table:1; /* == 1 in 4k map entries too */ > + > + /* These ten bits are only used in Block entries and are ignored > + * in Table entries. */ > + unsigned long mattr:4; /* Memory Attributes */ > + unsigned long read:1; /* Read access */ > + unsigned long write:1; /* Write access */ > + unsigned long sh:2; /* Shareability */ > + unsigned long af:1; /* Access Flag */ > + unsigned long sbz4:1; > + > + /* The base address must be appropriately aligned for Block entries */ > + unsigned long long base:36; /* Base address of block or next table */ > + unsigned long sbz3:4; > + > + /* These seven bits are only used in Block entries and are ignored > + * in Table entries. */ > + unsigned long contig:1; /* In a block of 16 contiguous entries */ > + unsigned long sbz2:1; > + unsigned long xn:1; /* eXecute-Never */ > + unsigned long type:4; /* Ignore by hardware. Used to store p2m types */ > + > + unsigned long sbz1:5; > +} lpae_p2m_t; > + > +/* Permission mask: xn, write, read */ > +#define P2M_PERM_MASK (0x00400000000000C0ULL) > +#define P2M_CLEAR_PERM(pte) ((pte).bits & ~P2M_PERM_MASK) > + > +/* > + * Walk is the common bits of p2m and pt entries which are needed to > + * simply walk the table (e.g. for debug). > + */ > +typedef struct __packed { > + /* These are used in all kinds of entry. */ > + unsigned long valid:1; /* Valid mapping */ > + unsigned long table:1; /* == 1 in 4k map entries too */ > + > + unsigned long pad2:10; > + > + /* The base address must be appropriately aligned for Block entries */ > + unsigned long long base:36; /* Base address of block or next table */ > + > + unsigned long pad1:16; > +} lpae_walk_t; > + > +typedef union { > + uint64_t bits; > + lpae_pt_t pt; > + lpae_p2m_t p2m; > + lpae_walk_t walk; > +} lpae_t; > + > +#endif /* __ASSEMBLY__ */ > + > +/* > + * These numbers add up to a 48-bit input address space. > + * > + * On 32-bit the zeroeth level does not exist, therefore the total is > + * 39-bits. The ARMv7-A architecture actually specifies a 40-bit input > + * address space for the p2m, with an 8K (1024-entry) top-level table. > + * However Xen only supports 16GB of RAM on 32-bit ARM systems and > + * therefore 39-bits are sufficient. > + */ > + > +#define LPAE_SHIFT 9 > +#define LPAE_ENTRIES (_AC(1,U) << LPAE_SHIFT) > +#define LPAE_ENTRY_MASK (LPAE_ENTRIES - 1) > + > +#define THIRD_SHIFT (PAGE_SHIFT) > +#define THIRD_ORDER (THIRD_SHIFT - PAGE_SHIFT) > +#define THIRD_SIZE ((paddr_t)1 << THIRD_SHIFT) > +#define THIRD_MASK (~(THIRD_SIZE - 1)) > +#define SECOND_SHIFT (THIRD_SHIFT + LPAE_SHIFT) > +#define SECOND_ORDER (SECOND_SHIFT - PAGE_SHIFT) > +#define SECOND_SIZE ((paddr_t)1 << SECOND_SHIFT) > +#define SECOND_MASK (~(SECOND_SIZE - 1)) > +#define FIRST_SHIFT (SECOND_SHIFT + LPAE_SHIFT) > +#define FIRST_ORDER (FIRST_SHIFT - PAGE_SHIFT) > +#define FIRST_SIZE ((paddr_t)1 << FIRST_SHIFT) > +#define FIRST_MASK (~(FIRST_SIZE - 1)) > +#define ZEROETH_SHIFT (FIRST_SHIFT + LPAE_SHIFT) > +#define ZEROETH_ORDER (ZEROETH_SHIFT - PAGE_SHIFT) > +#define ZEROETH_SIZE ((paddr_t)1 << ZEROETH_SHIFT) > +#define ZEROETH_MASK (~(ZEROETH_SIZE - 1)) > + > +/* Calculate the offsets into the pagetables for a given VA */ > +#define zeroeth_linear_offset(va) ((va) >> ZEROETH_SHIFT) > +#define first_linear_offset(va) ((va) >> FIRST_SHIFT) > +#define second_linear_offset(va) ((va) >> SECOND_SHIFT) > +#define third_linear_offset(va) ((va) >> THIRD_SHIFT) > + > +#define TABLE_OFFSET(offs) ((unsigned int)(offs) & LPAE_ENTRY_MASK) > +#define first_table_offset(va) TABLE_OFFSET(first_linear_offset(va)) > +#define second_table_offset(va) TABLE_OFFSET(second_linear_offset(va)) > +#define third_table_offset(va) TABLE_OFFSET(third_linear_offset(va)) > +#define zeroeth_table_offset(va) TABLE_OFFSET(zeroeth_linear_offset(va)) > + > +#endif /* __ARM_LPAE_H__ */ > + > +/* > + * Local variables: > + * mode: C > + * c-file-style: "BSD" > + * c-basic-offset: 4 > + * tab-width: 4 > + * indent-tabs-mode: nil > + * End: > + */ > diff --git a/xen/include/asm-arm/page.h b/xen/include/asm-arm/page.h > index 3670ab665d..cef2f28914 100644 > --- a/xen/include/asm-arm/page.h > +++ b/xen/include/asm-arm/page.h > @@ -3,6 +3,7 @@ > > #include <public/xen.h> > #include <asm/processor.h> > +#include <asm/lpae.h> > > #ifdef CONFIG_ARM_64 > #define PADDR_BITS 48 > @@ -97,114 +98,6 @@ > #include <xen/lib.h> > #include <asm/system.h> > > -/* WARNING! Unlike the Intel pagetable code, where l1 is the lowest > - * level and l4 is the root of the trie, the ARM pagetables follow ARM's > - * documentation: the levels are called first, second &c in the order > - * that the MMU walks them (i.e. "first" is the root of the trie). */ > - > -/****************************************************************************** > - * ARMv7-A LPAE pagetables: 3-level trie, mapping 40-bit input to > - * 40-bit output addresses. Tables at all levels have 512 64-bit entries > - * (i.e. are 4Kb long). > - * > - * The bit-shuffling that has the permission bits in branch nodes in a > - * different place from those in leaf nodes seems to be to allow linear > - * pagetable tricks. If we're not doing that then the set of permission > - * bits that's not in use in a given node type can be used as > - * extra software-defined bits. */ > - > -typedef struct __packed { > - /* These are used in all kinds of entry. */ > - unsigned long valid:1; /* Valid mapping */ > - unsigned long table:1; /* == 1 in 4k map entries too */ > - > - /* These ten bits are only used in Block entries and are ignored > - * in Table entries. */ > - unsigned long ai:3; /* Attribute Index */ > - unsigned long ns:1; /* Not-Secure */ > - unsigned long user:1; /* User-visible */ > - unsigned long ro:1; /* Read-Only */ > - unsigned long sh:2; /* Shareability */ > - unsigned long af:1; /* Access Flag */ > - unsigned long ng:1; /* Not-Global */ > - > - /* The base address must be appropriately aligned for Block entries */ > - unsigned long long base:36; /* Base address of block or next table */ > - unsigned long sbz:4; /* Must be zero */ > - > - /* These seven bits are only used in Block entries and are ignored > - * in Table entries. */ > - unsigned long contig:1; /* In a block of 16 contiguous entries */ > - unsigned long pxn:1; /* Privileged-XN */ > - unsigned long xn:1; /* eXecute-Never */ > - unsigned long avail:4; /* Ignored by hardware */ > - > - /* These 5 bits are only used in Table entries and are ignored in > - * Block entries */ > - unsigned long pxnt:1; /* Privileged-XN */ > - unsigned long xnt:1; /* eXecute-Never */ > - unsigned long apt:2; /* Access Permissions */ > - unsigned long nst:1; /* Not-Secure */ > -} lpae_pt_t; > - > -/* The p2m tables have almost the same layout, but some of the permission > - * and cache-control bits are laid out differently (or missing) */ > -typedef struct __packed { > - /* These are used in all kinds of entry. */ > - unsigned long valid:1; /* Valid mapping */ > - unsigned long table:1; /* == 1 in 4k map entries too */ > - > - /* These ten bits are only used in Block entries and are ignored > - * in Table entries. */ > - unsigned long mattr:4; /* Memory Attributes */ > - unsigned long read:1; /* Read access */ > - unsigned long write:1; /* Write access */ > - unsigned long sh:2; /* Shareability */ > - unsigned long af:1; /* Access Flag */ > - unsigned long sbz4:1; > - > - /* The base address must be appropriately aligned for Block entries */ > - unsigned long long base:36; /* Base address of block or next table */ > - unsigned long sbz3:4; > - > - /* These seven bits are only used in Block entries and are ignored > - * in Table entries. */ > - unsigned long contig:1; /* In a block of 16 contiguous entries */ > - unsigned long sbz2:1; > - unsigned long xn:1; /* eXecute-Never */ > - unsigned long type:4; /* Ignore by hardware. Used to store p2m types */ > - > - unsigned long sbz1:5; > -} lpae_p2m_t; > - > -/* Permission mask: xn, write, read */ > -#define P2M_PERM_MASK (0x00400000000000C0ULL) > -#define P2M_CLEAR_PERM(pte) ((pte).bits & ~P2M_PERM_MASK) > - > -/* > - * Walk is the common bits of p2m and pt entries which are needed to > - * simply walk the table (e.g. for debug). > - */ > -typedef struct __packed { > - /* These are used in all kinds of entry. */ > - unsigned long valid:1; /* Valid mapping */ > - unsigned long table:1; /* == 1 in 4k map entries too */ > - > - unsigned long pad2:10; > - > - /* The base address must be appropriately aligned for Block entries */ > - unsigned long long base:36; /* Base address of block or next table */ > - > - unsigned long pad1:16; > -} lpae_walk_t; > - > -typedef union { > - uint64_t bits; > - lpae_pt_t pt; > - lpae_p2m_t p2m; > - lpae_walk_t walk; > -} lpae_t; > - > #if defined(CONFIG_ARM_32) > # include <asm/arm32/page.h> > #elif defined(CONFIG_ARM_64) > @@ -390,49 +283,6 @@ static inline int gva_to_ipa(vaddr_t va, paddr_t *paddr, unsigned int flags) > > #endif /* __ASSEMBLY__ */ > > -/* > - * These numbers add up to a 48-bit input address space. > - * > - * On 32-bit the zeroeth level does not exist, therefore the total is > - * 39-bits. The ARMv7-A architecture actually specifies a 40-bit input > - * address space for the p2m, with an 8K (1024-entry) top-level table. > - * However Xen only supports 16GB of RAM on 32-bit ARM systems and > - * therefore 39-bits are sufficient. > - */ > - > -#define LPAE_SHIFT 9 > -#define LPAE_ENTRIES (_AC(1,U) << LPAE_SHIFT) > -#define LPAE_ENTRY_MASK (LPAE_ENTRIES - 1) > - > -#define THIRD_SHIFT (PAGE_SHIFT) > -#define THIRD_ORDER (THIRD_SHIFT - PAGE_SHIFT) > -#define THIRD_SIZE ((paddr_t)1 << THIRD_SHIFT) > -#define THIRD_MASK (~(THIRD_SIZE - 1)) > -#define SECOND_SHIFT (THIRD_SHIFT + LPAE_SHIFT) > -#define SECOND_ORDER (SECOND_SHIFT - PAGE_SHIFT) > -#define SECOND_SIZE ((paddr_t)1 << SECOND_SHIFT) > -#define SECOND_MASK (~(SECOND_SIZE - 1)) > -#define FIRST_SHIFT (SECOND_SHIFT + LPAE_SHIFT) > -#define FIRST_ORDER (FIRST_SHIFT - PAGE_SHIFT) > -#define FIRST_SIZE ((paddr_t)1 << FIRST_SHIFT) > -#define FIRST_MASK (~(FIRST_SIZE - 1)) > -#define ZEROETH_SHIFT (FIRST_SHIFT + LPAE_SHIFT) > -#define ZEROETH_ORDER (ZEROETH_SHIFT - PAGE_SHIFT) > -#define ZEROETH_SIZE ((paddr_t)1 << ZEROETH_SHIFT) > -#define ZEROETH_MASK (~(ZEROETH_SIZE - 1)) > - > -/* Calculate the offsets into the pagetables for a given VA */ > -#define zeroeth_linear_offset(va) ((va) >> ZEROETH_SHIFT) > -#define first_linear_offset(va) ((va) >> FIRST_SHIFT) > -#define second_linear_offset(va) ((va) >> SECOND_SHIFT) > -#define third_linear_offset(va) ((va) >> THIRD_SHIFT) > - > -#define TABLE_OFFSET(offs) ((unsigned int)(offs) & LPAE_ENTRY_MASK) > -#define first_table_offset(va) TABLE_OFFSET(first_linear_offset(va)) > -#define second_table_offset(va) TABLE_OFFSET(second_linear_offset(va)) > -#define third_table_offset(va) TABLE_OFFSET(third_linear_offset(va)) > -#define zeroeth_table_offset(va) TABLE_OFFSET(zeroeth_linear_offset(va)) > - > #define PAGE_ALIGN(x) (((x) + PAGE_SIZE - 1) & PAGE_MASK) > > #endif /* __ARM_PAGE_H__ */ Cheers, ~Sergej
diff --git a/xen/include/asm-arm/lpae.h b/xen/include/asm-arm/lpae.h new file mode 100644 index 0000000000..ad8c571ea5 --- /dev/null +++ b/xen/include/asm-arm/lpae.h @@ -0,0 +1,169 @@ +#ifndef __ARM_LPAE_H__ +#define __ARM_LPAE_H__ + +#ifndef __ASSEMBLY__ + +/* WARNING! Unlike the Intel pagetable code, where l1 is the lowest + * level and l4 is the root of the trie, the ARM pagetables follow ARM's + * documentation: the levels are called first, second &c in the order + * that the MMU walks them (i.e. "first" is the root of the trie). */ + +/****************************************************************************** + * ARMv7-A LPAE pagetables: 3-level trie, mapping 40-bit input to + * 40-bit output addresses. Tables at all levels have 512 64-bit entries + * (i.e. are 4Kb long). + * + * The bit-shuffling that has the permission bits in branch nodes in a + * different place from those in leaf nodes seems to be to allow linear + * pagetable tricks. If we're not doing that then the set of permission + * bits that's not in use in a given node type can be used as + * extra software-defined bits. */ + +typedef struct __packed { + /* These are used in all kinds of entry. */ + unsigned long valid:1; /* Valid mapping */ + unsigned long table:1; /* == 1 in 4k map entries too */ + + /* These ten bits are only used in Block entries and are ignored + * in Table entries. */ + unsigned long ai:3; /* Attribute Index */ + unsigned long ns:1; /* Not-Secure */ + unsigned long user:1; /* User-visible */ + unsigned long ro:1; /* Read-Only */ + unsigned long sh:2; /* Shareability */ + unsigned long af:1; /* Access Flag */ + unsigned long ng:1; /* Not-Global */ + + /* The base address must be appropriately aligned for Block entries */ + unsigned long long base:36; /* Base address of block or next table */ + unsigned long sbz:4; /* Must be zero */ + + /* These seven bits are only used in Block entries and are ignored + * in Table entries. */ + unsigned long contig:1; /* In a block of 16 contiguous entries */ + unsigned long pxn:1; /* Privileged-XN */ + unsigned long xn:1; /* eXecute-Never */ + unsigned long avail:4; /* Ignored by hardware */ + + /* These 5 bits are only used in Table entries and are ignored in + * Block entries */ + unsigned long pxnt:1; /* Privileged-XN */ + unsigned long xnt:1; /* eXecute-Never */ + unsigned long apt:2; /* Access Permissions */ + unsigned long nst:1; /* Not-Secure */ +} lpae_pt_t; + +/* The p2m tables have almost the same layout, but some of the permission + * and cache-control bits are laid out differently (or missing) */ +typedef struct __packed { + /* These are used in all kinds of entry. */ + unsigned long valid:1; /* Valid mapping */ + unsigned long table:1; /* == 1 in 4k map entries too */ + + /* These ten bits are only used in Block entries and are ignored + * in Table entries. */ + unsigned long mattr:4; /* Memory Attributes */ + unsigned long read:1; /* Read access */ + unsigned long write:1; /* Write access */ + unsigned long sh:2; /* Shareability */ + unsigned long af:1; /* Access Flag */ + unsigned long sbz4:1; + + /* The base address must be appropriately aligned for Block entries */ + unsigned long long base:36; /* Base address of block or next table */ + unsigned long sbz3:4; + + /* These seven bits are only used in Block entries and are ignored + * in Table entries. */ + unsigned long contig:1; /* In a block of 16 contiguous entries */ + unsigned long sbz2:1; + unsigned long xn:1; /* eXecute-Never */ + unsigned long type:4; /* Ignore by hardware. Used to store p2m types */ + + unsigned long sbz1:5; +} lpae_p2m_t; + +/* Permission mask: xn, write, read */ +#define P2M_PERM_MASK (0x00400000000000C0ULL) +#define P2M_CLEAR_PERM(pte) ((pte).bits & ~P2M_PERM_MASK) + +/* + * Walk is the common bits of p2m and pt entries which are needed to + * simply walk the table (e.g. for debug). + */ +typedef struct __packed { + /* These are used in all kinds of entry. */ + unsigned long valid:1; /* Valid mapping */ + unsigned long table:1; /* == 1 in 4k map entries too */ + + unsigned long pad2:10; + + /* The base address must be appropriately aligned for Block entries */ + unsigned long long base:36; /* Base address of block or next table */ + + unsigned long pad1:16; +} lpae_walk_t; + +typedef union { + uint64_t bits; + lpae_pt_t pt; + lpae_p2m_t p2m; + lpae_walk_t walk; +} lpae_t; + +#endif /* __ASSEMBLY__ */ + +/* + * These numbers add up to a 48-bit input address space. + * + * On 32-bit the zeroeth level does not exist, therefore the total is + * 39-bits. The ARMv7-A architecture actually specifies a 40-bit input + * address space for the p2m, with an 8K (1024-entry) top-level table. + * However Xen only supports 16GB of RAM on 32-bit ARM systems and + * therefore 39-bits are sufficient. + */ + +#define LPAE_SHIFT 9 +#define LPAE_ENTRIES (_AC(1,U) << LPAE_SHIFT) +#define LPAE_ENTRY_MASK (LPAE_ENTRIES - 1) + +#define THIRD_SHIFT (PAGE_SHIFT) +#define THIRD_ORDER (THIRD_SHIFT - PAGE_SHIFT) +#define THIRD_SIZE ((paddr_t)1 << THIRD_SHIFT) +#define THIRD_MASK (~(THIRD_SIZE - 1)) +#define SECOND_SHIFT (THIRD_SHIFT + LPAE_SHIFT) +#define SECOND_ORDER (SECOND_SHIFT - PAGE_SHIFT) +#define SECOND_SIZE ((paddr_t)1 << SECOND_SHIFT) +#define SECOND_MASK (~(SECOND_SIZE - 1)) +#define FIRST_SHIFT (SECOND_SHIFT + LPAE_SHIFT) +#define FIRST_ORDER (FIRST_SHIFT - PAGE_SHIFT) +#define FIRST_SIZE ((paddr_t)1 << FIRST_SHIFT) +#define FIRST_MASK (~(FIRST_SIZE - 1)) +#define ZEROETH_SHIFT (FIRST_SHIFT + LPAE_SHIFT) +#define ZEROETH_ORDER (ZEROETH_SHIFT - PAGE_SHIFT) +#define ZEROETH_SIZE ((paddr_t)1 << ZEROETH_SHIFT) +#define ZEROETH_MASK (~(ZEROETH_SIZE - 1)) + +/* Calculate the offsets into the pagetables for a given VA */ +#define zeroeth_linear_offset(va) ((va) >> ZEROETH_SHIFT) +#define first_linear_offset(va) ((va) >> FIRST_SHIFT) +#define second_linear_offset(va) ((va) >> SECOND_SHIFT) +#define third_linear_offset(va) ((va) >> THIRD_SHIFT) + +#define TABLE_OFFSET(offs) ((unsigned int)(offs) & LPAE_ENTRY_MASK) +#define first_table_offset(va) TABLE_OFFSET(first_linear_offset(va)) +#define second_table_offset(va) TABLE_OFFSET(second_linear_offset(va)) +#define third_table_offset(va) TABLE_OFFSET(third_linear_offset(va)) +#define zeroeth_table_offset(va) TABLE_OFFSET(zeroeth_linear_offset(va)) + +#endif /* __ARM_LPAE_H__ */ + +/* + * Local variables: + * mode: C + * c-file-style: "BSD" + * c-basic-offset: 4 + * tab-width: 4 + * indent-tabs-mode: nil + * End: + */ diff --git a/xen/include/asm-arm/page.h b/xen/include/asm-arm/page.h index 3670ab665d..cef2f28914 100644 --- a/xen/include/asm-arm/page.h +++ b/xen/include/asm-arm/page.h @@ -3,6 +3,7 @@ #include <public/xen.h> #include <asm/processor.h> +#include <asm/lpae.h> #ifdef CONFIG_ARM_64 #define PADDR_BITS 48 @@ -97,114 +98,6 @@ #include <xen/lib.h> #include <asm/system.h> -/* WARNING! Unlike the Intel pagetable code, where l1 is the lowest - * level and l4 is the root of the trie, the ARM pagetables follow ARM's - * documentation: the levels are called first, second &c in the order - * that the MMU walks them (i.e. "first" is the root of the trie). */ - -/****************************************************************************** - * ARMv7-A LPAE pagetables: 3-level trie, mapping 40-bit input to - * 40-bit output addresses. Tables at all levels have 512 64-bit entries - * (i.e. are 4Kb long). - * - * The bit-shuffling that has the permission bits in branch nodes in a - * different place from those in leaf nodes seems to be to allow linear - * pagetable tricks. If we're not doing that then the set of permission - * bits that's not in use in a given node type can be used as - * extra software-defined bits. */ - -typedef struct __packed { - /* These are used in all kinds of entry. */ - unsigned long valid:1; /* Valid mapping */ - unsigned long table:1; /* == 1 in 4k map entries too */ - - /* These ten bits are only used in Block entries and are ignored - * in Table entries. */ - unsigned long ai:3; /* Attribute Index */ - unsigned long ns:1; /* Not-Secure */ - unsigned long user:1; /* User-visible */ - unsigned long ro:1; /* Read-Only */ - unsigned long sh:2; /* Shareability */ - unsigned long af:1; /* Access Flag */ - unsigned long ng:1; /* Not-Global */ - - /* The base address must be appropriately aligned for Block entries */ - unsigned long long base:36; /* Base address of block or next table */ - unsigned long sbz:4; /* Must be zero */ - - /* These seven bits are only used in Block entries and are ignored - * in Table entries. */ - unsigned long contig:1; /* In a block of 16 contiguous entries */ - unsigned long pxn:1; /* Privileged-XN */ - unsigned long xn:1; /* eXecute-Never */ - unsigned long avail:4; /* Ignored by hardware */ - - /* These 5 bits are only used in Table entries and are ignored in - * Block entries */ - unsigned long pxnt:1; /* Privileged-XN */ - unsigned long xnt:1; /* eXecute-Never */ - unsigned long apt:2; /* Access Permissions */ - unsigned long nst:1; /* Not-Secure */ -} lpae_pt_t; - -/* The p2m tables have almost the same layout, but some of the permission - * and cache-control bits are laid out differently (or missing) */ -typedef struct __packed { - /* These are used in all kinds of entry. */ - unsigned long valid:1; /* Valid mapping */ - unsigned long table:1; /* == 1 in 4k map entries too */ - - /* These ten bits are only used in Block entries and are ignored - * in Table entries. */ - unsigned long mattr:4; /* Memory Attributes */ - unsigned long read:1; /* Read access */ - unsigned long write:1; /* Write access */ - unsigned long sh:2; /* Shareability */ - unsigned long af:1; /* Access Flag */ - unsigned long sbz4:1; - - /* The base address must be appropriately aligned for Block entries */ - unsigned long long base:36; /* Base address of block or next table */ - unsigned long sbz3:4; - - /* These seven bits are only used in Block entries and are ignored - * in Table entries. */ - unsigned long contig:1; /* In a block of 16 contiguous entries */ - unsigned long sbz2:1; - unsigned long xn:1; /* eXecute-Never */ - unsigned long type:4; /* Ignore by hardware. Used to store p2m types */ - - unsigned long sbz1:5; -} lpae_p2m_t; - -/* Permission mask: xn, write, read */ -#define P2M_PERM_MASK (0x00400000000000C0ULL) -#define P2M_CLEAR_PERM(pte) ((pte).bits & ~P2M_PERM_MASK) - -/* - * Walk is the common bits of p2m and pt entries which are needed to - * simply walk the table (e.g. for debug). - */ -typedef struct __packed { - /* These are used in all kinds of entry. */ - unsigned long valid:1; /* Valid mapping */ - unsigned long table:1; /* == 1 in 4k map entries too */ - - unsigned long pad2:10; - - /* The base address must be appropriately aligned for Block entries */ - unsigned long long base:36; /* Base address of block or next table */ - - unsigned long pad1:16; -} lpae_walk_t; - -typedef union { - uint64_t bits; - lpae_pt_t pt; - lpae_p2m_t p2m; - lpae_walk_t walk; -} lpae_t; - #if defined(CONFIG_ARM_32) # include <asm/arm32/page.h> #elif defined(CONFIG_ARM_64) @@ -390,49 +283,6 @@ static inline int gva_to_ipa(vaddr_t va, paddr_t *paddr, unsigned int flags) #endif /* __ASSEMBLY__ */ -/* - * These numbers add up to a 48-bit input address space. - * - * On 32-bit the zeroeth level does not exist, therefore the total is - * 39-bits. The ARMv7-A architecture actually specifies a 40-bit input - * address space for the p2m, with an 8K (1024-entry) top-level table. - * However Xen only supports 16GB of RAM on 32-bit ARM systems and - * therefore 39-bits are sufficient. - */ - -#define LPAE_SHIFT 9 -#define LPAE_ENTRIES (_AC(1,U) << LPAE_SHIFT) -#define LPAE_ENTRY_MASK (LPAE_ENTRIES - 1) - -#define THIRD_SHIFT (PAGE_SHIFT) -#define THIRD_ORDER (THIRD_SHIFT - PAGE_SHIFT) -#define THIRD_SIZE ((paddr_t)1 << THIRD_SHIFT) -#define THIRD_MASK (~(THIRD_SIZE - 1)) -#define SECOND_SHIFT (THIRD_SHIFT + LPAE_SHIFT) -#define SECOND_ORDER (SECOND_SHIFT - PAGE_SHIFT) -#define SECOND_SIZE ((paddr_t)1 << SECOND_SHIFT) -#define SECOND_MASK (~(SECOND_SIZE - 1)) -#define FIRST_SHIFT (SECOND_SHIFT + LPAE_SHIFT) -#define FIRST_ORDER (FIRST_SHIFT - PAGE_SHIFT) -#define FIRST_SIZE ((paddr_t)1 << FIRST_SHIFT) -#define FIRST_MASK (~(FIRST_SIZE - 1)) -#define ZEROETH_SHIFT (FIRST_SHIFT + LPAE_SHIFT) -#define ZEROETH_ORDER (ZEROETH_SHIFT - PAGE_SHIFT) -#define ZEROETH_SIZE ((paddr_t)1 << ZEROETH_SHIFT) -#define ZEROETH_MASK (~(ZEROETH_SIZE - 1)) - -/* Calculate the offsets into the pagetables for a given VA */ -#define zeroeth_linear_offset(va) ((va) >> ZEROETH_SHIFT) -#define first_linear_offset(va) ((va) >> FIRST_SHIFT) -#define second_linear_offset(va) ((va) >> SECOND_SHIFT) -#define third_linear_offset(va) ((va) >> THIRD_SHIFT) - -#define TABLE_OFFSET(offs) ((unsigned int)(offs) & LPAE_ENTRY_MASK) -#define first_table_offset(va) TABLE_OFFSET(first_linear_offset(va)) -#define second_table_offset(va) TABLE_OFFSET(second_linear_offset(va)) -#define third_table_offset(va) TABLE_OFFSET(third_linear_offset(va)) -#define zeroeth_table_offset(va) TABLE_OFFSET(zeroeth_linear_offset(va)) - #define PAGE_ALIGN(x) (((x) + PAGE_SIZE - 1) & PAGE_MASK) #endif /* __ARM_PAGE_H__ */