@@ -13,7 +13,7 @@
#ifndef HW_9PFS_XEN_9PFS_H
#define HW_9PFS_XEN_9PFS_H
-#include <xen/io/protocols.h>
+#include "hw/xen/interface/io/protocols.h"
#include "hw/xen/interface/io/ring.h"
/*
@@ -2,7 +2,7 @@
#define XEN_BLKIF_H
#include "hw/xen/interface/io/blkif.h"
-#include <xen/io/protocols.h>
+#include "hw/xen/interface/io/protocols.h"
/*
* Not a real protocol. Used to generate ring structs which contain
@@ -28,7 +28,7 @@
#include "chardev/char-fe.h"
#include "hw/xen/xen-legacy-backend.h"
-#include <xen/io/console.h>
+#include "hw/xen/interface/io/console.h"
struct buffer {
uint8_t *data;
@@ -32,10 +32,9 @@
#include "ui/console.h"
#include "hw/xen/xen-legacy-backend.h"
-#include <xen/event_channel.h>
-#include <xen/io/fbif.h>
-#include <xen/io/kbdif.h>
-#include <xen/io/protocols.h>
+#include "hw/xen/interface/io/fbif.h"
+#include "hw/xen/interface/io/kbdif.h"
+#include "hw/xen/interface/io/protocols.h"
#include "trace.h"
@@ -30,7 +30,7 @@
#include "net/util.h"
#include "hw/xen/xen-legacy-backend.h"
-#include <xen/io/netif.h>
+#include "hw/xen/interface/io/netif.h"
/* ------------------------------------------------------------- */
new file mode 100644
@@ -0,0 +1,46 @@
+/******************************************************************************
+ * console.h
+ *
+ * Console I/O interface for Xen guest OSes.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to
+ * deal in the Software without restriction, including without limitation the
+ * rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Copyright (c) 2005, Keir Fraser
+ */
+
+#ifndef XEN_PUBLIC_IO_CONSOLE_H
+#define XEN_PUBLIC_IO_CONSOLE_H
+
+typedef uint32_t XENCONS_RING_IDX;
+
+#define MASK_XENCONS_IDX(idx, ring) ((idx) & (sizeof(ring)-1))
+
+struct xencons_interface {
+ char in[1024];
+ char out[2048];
+ XENCONS_RING_IDX in_cons, in_prod;
+ XENCONS_RING_IDX out_cons, out_prod;
+};
+
+#ifdef XEN_WANT_FLEX_CONSOLE_RING
+#include "ring.h"
+DEFINE_XEN_FLEX_RING(xencons);
+#endif
+
+#endif /* XEN_PUBLIC_IO_CONSOLE_H */
new file mode 100644
@@ -0,0 +1,156 @@
+/*
+ * fbif.h -- Xen virtual frame buffer device
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to
+ * deal in the Software without restriction, including without limitation the
+ * rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Copyright (C) 2005 Anthony Liguori <aliguori@us.ibm.com>
+ * Copyright (C) 2006 Red Hat, Inc., Markus Armbruster <armbru@redhat.com>
+ */
+
+#ifndef XEN_PUBLIC_IO_FBIF_H
+#define XEN_PUBLIC_IO_FBIF_H
+
+/* Out events (frontend -> backend) */
+
+/*
+ * Out events may be sent only when requested by backend, and receipt
+ * of an unknown out event is an error.
+ */
+
+/* Event type 1 currently not used */
+/*
+ * Framebuffer update notification event
+ * Capable frontend sets feature-update in xenstore.
+ * Backend requests it by setting request-update in xenstore.
+ */
+#define XENFB_TYPE_UPDATE 2
+
+struct xenfb_update
+{
+ uint8_t type; /* XENFB_TYPE_UPDATE */
+ int32_t x; /* source x */
+ int32_t y; /* source y */
+ int32_t width; /* rect width */
+ int32_t height; /* rect height */
+};
+
+/*
+ * Framebuffer resize notification event
+ * Capable backend sets feature-resize in xenstore.
+ */
+#define XENFB_TYPE_RESIZE 3
+
+struct xenfb_resize
+{
+ uint8_t type; /* XENFB_TYPE_RESIZE */
+ int32_t width; /* width in pixels */
+ int32_t height; /* height in pixels */
+ int32_t stride; /* stride in bytes */
+ int32_t depth; /* depth in bits */
+ int32_t offset; /* offset of the framebuffer in bytes */
+};
+
+#define XENFB_OUT_EVENT_SIZE 40
+
+union xenfb_out_event
+{
+ uint8_t type;
+ struct xenfb_update update;
+ struct xenfb_resize resize;
+ char pad[XENFB_OUT_EVENT_SIZE];
+};
+
+/* In events (backend -> frontend) */
+
+/*
+ * Frontends should ignore unknown in events.
+ */
+
+/*
+ * Framebuffer refresh period advice
+ * Backend sends it to advise the frontend their preferred period of
+ * refresh. Frontends that keep the framebuffer constantly up-to-date
+ * just ignore it. Frontends that use the advice should immediately
+ * refresh the framebuffer (and send an update notification event if
+ * those have been requested), then use the update frequency to guide
+ * their periodical refreshs.
+ */
+#define XENFB_TYPE_REFRESH_PERIOD 1
+#define XENFB_NO_REFRESH 0
+
+struct xenfb_refresh_period
+{
+ uint8_t type; /* XENFB_TYPE_UPDATE_PERIOD */
+ uint32_t period; /* period of refresh, in ms,
+ * XENFB_NO_REFRESH if no refresh is needed */
+};
+
+#define XENFB_IN_EVENT_SIZE 40
+
+union xenfb_in_event
+{
+ uint8_t type;
+ struct xenfb_refresh_period refresh_period;
+ char pad[XENFB_IN_EVENT_SIZE];
+};
+
+/* shared page */
+
+#define XENFB_IN_RING_SIZE 1024
+#define XENFB_IN_RING_LEN (XENFB_IN_RING_SIZE / XENFB_IN_EVENT_SIZE)
+#define XENFB_IN_RING_OFFS 1024
+#define XENFB_IN_RING(page) \
+ ((union xenfb_in_event *)((char *)(page) + XENFB_IN_RING_OFFS))
+#define XENFB_IN_RING_REF(page, idx) \
+ (XENFB_IN_RING((page))[(idx) % XENFB_IN_RING_LEN])
+
+#define XENFB_OUT_RING_SIZE 2048
+#define XENFB_OUT_RING_LEN (XENFB_OUT_RING_SIZE / XENFB_OUT_EVENT_SIZE)
+#define XENFB_OUT_RING_OFFS (XENFB_IN_RING_OFFS + XENFB_IN_RING_SIZE)
+#define XENFB_OUT_RING(page) \
+ ((union xenfb_out_event *)((char *)(page) + XENFB_OUT_RING_OFFS))
+#define XENFB_OUT_RING_REF(page, idx) \
+ (XENFB_OUT_RING((page))[(idx) % XENFB_OUT_RING_LEN])
+
+struct xenfb_page
+{
+ uint32_t in_cons, in_prod;
+ uint32_t out_cons, out_prod;
+
+ int32_t width; /* the width of the framebuffer (in pixels) */
+ int32_t height; /* the height of the framebuffer (in pixels) */
+ uint32_t line_length; /* the length of a row of pixels (in bytes) */
+ uint32_t mem_length; /* the length of the framebuffer (in bytes) */
+ uint8_t depth; /* the depth of a pixel (in bits) */
+
+ /*
+ * Framebuffer page directory
+ *
+ * Each directory page holds PAGE_SIZE / sizeof(*pd)
+ * framebuffer pages, and can thus map up to PAGE_SIZE *
+ * PAGE_SIZE / sizeof(*pd) bytes. With PAGE_SIZE == 4096 and
+ * sizeof(unsigned long) == 4/8, that's 4 Megs 32 bit and 2 Megs
+ * 64 bit. 256 directories give enough room for a 512 Meg
+ * framebuffer with a max resolution of 12,800x10,240. Should
+ * be enough for a while with room leftover for expansion.
+ */
+ unsigned long pd[256];
+};
+
+#endif
new file mode 100644
@@ -0,0 +1,566 @@
+/*
+ * kbdif.h -- Xen virtual keyboard/mouse
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to
+ * deal in the Software without restriction, including without limitation the
+ * rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Copyright (C) 2005 Anthony Liguori <aliguori@us.ibm.com>
+ * Copyright (C) 2006 Red Hat, Inc., Markus Armbruster <armbru@redhat.com>
+ */
+
+#ifndef XEN_PUBLIC_IO_KBDIF_H
+#define XEN_PUBLIC_IO_KBDIF_H
+
+/*
+ *****************************************************************************
+ * Feature and Parameter Negotiation
+ *****************************************************************************
+ *
+ * The two halves of a para-virtual driver utilize nodes within
+ * XenStore to communicate capabilities and to negotiate operating parameters.
+ * This section enumerates these nodes which reside in the respective front and
+ * backend portions of XenStore, following XenBus convention.
+ *
+ * All data in XenStore is stored as strings. Nodes specifying numeric
+ * values are encoded in decimal. Integer value ranges listed below are
+ * expressed as fixed sized integer types capable of storing the conversion
+ * of a properly formated node string, without loss of information.
+ *
+ *****************************************************************************
+ * Backend XenBus Nodes
+ *****************************************************************************
+ *
+ *---------------------------- Features supported ----------------------------
+ *
+ * Capable backend advertises supported features by publishing
+ * corresponding entries in XenStore and puts 1 as the value of the entry.
+ * If a feature is not supported then 0 must be set or feature entry omitted.
+ *
+ * feature-disable-keyboard
+ * Values: <uint>
+ *
+ * If there is no need to expose a virtual keyboard device by the
+ * frontend then this must be set to 1.
+ *
+ * feature-disable-pointer
+ * Values: <uint>
+ *
+ * If there is no need to expose a virtual pointer device by the
+ * frontend then this must be set to 1.
+ *
+ * feature-abs-pointer
+ * Values: <uint>
+ *
+ * Backends, which support reporting of absolute coordinates for pointer
+ * device should set this to 1.
+ *
+ * feature-multi-touch
+ * Values: <uint>
+ *
+ * Backends, which support reporting of multi-touch events
+ * should set this to 1.
+ *
+ * feature-raw-pointer
+ * Values: <uint>
+ *
+ * Backends, which support reporting raw (unscaled) absolute coordinates
+ * for pointer devices should set this to 1. Raw (unscaled) values have
+ * a range of [0, 0x7fff].
+ *
+ *----------------------- Device Instance Parameters ------------------------
+ *
+ * unique-id
+ * Values: <string>
+ *
+ * After device instance initialization it is assigned a unique ID,
+ * so every instance of the frontend can be identified by the backend
+ * by this ID. This can be UUID or such.
+ *
+ *------------------------- Pointer Device Parameters ------------------------
+ *
+ * width
+ * Values: <uint>
+ *
+ * Maximum X coordinate (width) to be used by the frontend
+ * while reporting input events, pixels, [0; UINT32_MAX].
+ *
+ * height
+ * Values: <uint>
+ *
+ * Maximum Y coordinate (height) to be used by the frontend
+ * while reporting input events, pixels, [0; UINT32_MAX].
+ *
+ *----------------------- Multi-touch Device Parameters ----------------------
+ *
+ * multi-touch-num-contacts
+ * Values: <uint>
+ *
+ * Number of simultaneous touches reported.
+ *
+ * multi-touch-width
+ * Values: <uint>
+ *
+ * Width of the touch area to be used by the frontend
+ * while reporting input events, pixels, [0; UINT32_MAX].
+ *
+ * multi-touch-height
+ * Values: <uint>
+ *
+ * Height of the touch area to be used by the frontend
+ * while reporting input events, pixels, [0; UINT32_MAX].
+ *
+ *****************************************************************************
+ * Frontend XenBus Nodes
+ *****************************************************************************
+ *
+ *------------------------------ Feature request -----------------------------
+ *
+ * Capable frontend requests features from backend via setting corresponding
+ * entries to 1 in XenStore. Requests for features not advertised as supported
+ * by the backend have no effect.
+ *
+ * request-abs-pointer
+ * Values: <uint>
+ *
+ * Request backend to report absolute pointer coordinates
+ * (XENKBD_TYPE_POS) instead of relative ones (XENKBD_TYPE_MOTION).
+ *
+ * request-multi-touch
+ * Values: <uint>
+ *
+ * Request backend to report multi-touch events.
+ *
+ * request-raw-pointer
+ * Values: <uint>
+ *
+ * Request backend to report raw unscaled absolute pointer coordinates.
+ * This option is only valid if request-abs-pointer is also set.
+ * Raw unscaled coordinates have the range [0, 0x7fff]
+ *
+ *----------------------- Request Transport Parameters -----------------------
+ *
+ * event-channel
+ * Values: <uint>
+ *
+ * The identifier of the Xen event channel used to signal activity
+ * in the ring buffer.
+ *
+ * page-gref
+ * Values: <uint>
+ *
+ * The Xen grant reference granting permission for the backend to map
+ * a sole page in a single page sized event ring buffer.
+ *
+ * page-ref
+ * Values: <uint>
+ *
+ * OBSOLETE, not recommended for use.
+ * PFN of the shared page.
+ */
+
+/*
+ * EVENT CODES.
+ */
+
+#define XENKBD_TYPE_MOTION 1
+#define XENKBD_TYPE_RESERVED 2
+#define XENKBD_TYPE_KEY 3
+#define XENKBD_TYPE_POS 4
+#define XENKBD_TYPE_MTOUCH 5
+
+/* Multi-touch event sub-codes */
+
+#define XENKBD_MT_EV_DOWN 0
+#define XENKBD_MT_EV_UP 1
+#define XENKBD_MT_EV_MOTION 2
+#define XENKBD_MT_EV_SYN 3
+#define XENKBD_MT_EV_SHAPE 4
+#define XENKBD_MT_EV_ORIENT 5
+
+/*
+ * CONSTANTS, XENSTORE FIELD AND PATH NAME STRINGS, HELPERS.
+ */
+
+#define XENKBD_DRIVER_NAME "vkbd"
+
+#define XENKBD_FIELD_FEAT_DSBL_KEYBRD "feature-disable-keyboard"
+#define XENKBD_FIELD_FEAT_DSBL_POINTER "feature-disable-pointer"
+#define XENKBD_FIELD_FEAT_ABS_POINTER "feature-abs-pointer"
+#define XENKBD_FIELD_FEAT_RAW_POINTER "feature-raw-pointer"
+#define XENKBD_FIELD_FEAT_MTOUCH "feature-multi-touch"
+#define XENKBD_FIELD_REQ_ABS_POINTER "request-abs-pointer"
+#define XENKBD_FIELD_REQ_RAW_POINTER "request-raw-pointer"
+#define XENKBD_FIELD_REQ_MTOUCH "request-multi-touch"
+#define XENKBD_FIELD_RING_GREF "page-gref"
+#define XENKBD_FIELD_EVT_CHANNEL "event-channel"
+#define XENKBD_FIELD_WIDTH "width"
+#define XENKBD_FIELD_HEIGHT "height"
+#define XENKBD_FIELD_MT_WIDTH "multi-touch-width"
+#define XENKBD_FIELD_MT_HEIGHT "multi-touch-height"
+#define XENKBD_FIELD_MT_NUM_CONTACTS "multi-touch-num-contacts"
+#define XENKBD_FIELD_UNIQUE_ID "unique-id"
+
+/* OBSOLETE, not recommended for use */
+#define XENKBD_FIELD_RING_REF "page-ref"
+
+/*
+ *****************************************************************************
+ * Description of the protocol between frontend and backend driver.
+ *****************************************************************************
+ *
+ * The two halves of a Para-virtual driver communicate with
+ * each other using a shared page and an event channel.
+ * Shared page contains a ring with event structures.
+ *
+ * All reserved fields in the structures below must be 0.
+ *
+ *****************************************************************************
+ * Backend to frontend events
+ *****************************************************************************
+ *
+ * Frontends should ignore unknown in events.
+ * All event packets have the same length (40 octets)
+ * All event packets have common header:
+ *
+ * 0 octet
+ * +-----------------+
+ * | type |
+ * +-----------------+
+ * type - uint8_t, event code, XENKBD_TYPE_???
+ *
+ *
+ * Pointer relative movement event
+ * 0 1 2 3 octet
+ * +----------------+----------------+----------------+----------------+
+ * | _TYPE_MOTION | reserved | 4
+ * +----------------+----------------+----------------+----------------+
+ * | rel_x | 8
+ * +----------------+----------------+----------------+----------------+
+ * | rel_y | 12
+ * +----------------+----------------+----------------+----------------+
+ * | rel_z | 16
+ * +----------------+----------------+----------------+----------------+
+ * | reserved | 20
+ * +----------------+----------------+----------------+----------------+
+ * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/|
+ * +----------------+----------------+----------------+----------------+
+ * | reserved | 40
+ * +----------------+----------------+----------------+----------------+
+ *
+ * rel_x - int32_t, relative X motion
+ * rel_y - int32_t, relative Y motion
+ * rel_z - int32_t, relative Z motion (wheel)
+ */
+
+struct xenkbd_motion
+{
+ uint8_t type;
+ int32_t rel_x;
+ int32_t rel_y;
+ int32_t rel_z;
+};
+
+/*
+ * Key event (includes pointer buttons)
+ * 0 1 2 3 octet
+ * +----------------+----------------+----------------+----------------+
+ * | _TYPE_KEY | pressed | reserved | 4
+ * +----------------+----------------+----------------+----------------+
+ * | keycode | 8
+ * +----------------+----------------+----------------+----------------+
+ * | reserved | 12
+ * +----------------+----------------+----------------+----------------+
+ * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/|
+ * +----------------+----------------+----------------+----------------+
+ * | reserved | 40
+ * +----------------+----------------+----------------+----------------+
+ *
+ * pressed - uint8_t, 1 if pressed; 0 otherwise
+ * keycode - uint32_t, KEY_* from linux/input.h
+ */
+
+struct xenkbd_key
+{
+ uint8_t type;
+ uint8_t pressed;
+ uint32_t keycode;
+};
+
+/*
+ * Pointer absolute position event
+ * 0 1 2 3 octet
+ * +----------------+----------------+----------------+----------------+
+ * | _TYPE_POS | reserved | 4
+ * +----------------+----------------+----------------+----------------+
+ * | abs_x | 8
+ * +----------------+----------------+----------------+----------------+
+ * | abs_y | 12
+ * +----------------+----------------+----------------+----------------+
+ * | rel_z | 16
+ * +----------------+----------------+----------------+----------------+
+ * | reserved | 20
+ * +----------------+----------------+----------------+----------------+
+ * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/|
+ * +----------------+----------------+----------------+----------------+
+ * | reserved | 40
+ * +----------------+----------------+----------------+----------------+
+ *
+ * abs_x - int32_t, absolute X position (in FB pixels)
+ * abs_y - int32_t, absolute Y position (in FB pixels)
+ * rel_z - int32_t, relative Z motion (wheel)
+ */
+
+struct xenkbd_position
+{
+ uint8_t type;
+ int32_t abs_x;
+ int32_t abs_y;
+ int32_t rel_z;
+};
+
+/*
+ * Multi-touch event and its sub-types
+ *
+ * All multi-touch event packets have common header:
+ *
+ * 0 1 2 3 octet
+ * +----------------+----------------+----------------+----------------+
+ * | _TYPE_MTOUCH | event_type | contact_id | reserved | 4
+ * +----------------+----------------+----------------+----------------+
+ * | reserved | 8
+ * +----------------+----------------+----------------+----------------+
+ *
+ * event_type - unt8_t, multi-touch event sub-type, XENKBD_MT_EV_???
+ * contact_id - unt8_t, ID of the contact
+ *
+ * Touch interactions can consist of one or more contacts.
+ * For each contact, a series of events is generated, starting
+ * with a down event, followed by zero or more motion events,
+ * and ending with an up event. Events relating to the same
+ * contact point can be identified by the ID of the sequence: contact ID.
+ * Contact ID may be reused after XENKBD_MT_EV_UP event and
+ * is in the [0; XENKBD_FIELD_NUM_CONTACTS - 1] range.
+ *
+ * For further information please refer to documentation on Wayland [1],
+ * Linux [2] and Windows [3] multi-touch support.
+ *
+ * [1] https://cgit.freedesktop.org/wayland/wayland/tree/protocol/wayland.xml
+ * [2] https://www.kernel.org/doc/Documentation/input/multi-touch-protocol.txt
+ * [3] https://msdn.microsoft.com/en-us/library/jj151564(v=vs.85).aspx
+ *
+ *
+ * Multi-touch down event - sent when a new touch is made: touch is assigned
+ * a unique contact ID, sent with this and consequent events related
+ * to this touch.
+ * 0 1 2 3 octet
+ * +----------------+----------------+----------------+----------------+
+ * | _TYPE_MTOUCH | _MT_EV_DOWN | contact_id | reserved | 4
+ * +----------------+----------------+----------------+----------------+
+ * | reserved | 8
+ * +----------------+----------------+----------------+----------------+
+ * | abs_x | 12
+ * +----------------+----------------+----------------+----------------+
+ * | abs_y | 16
+ * +----------------+----------------+----------------+----------------+
+ * | reserved | 20
+ * +----------------+----------------+----------------+----------------+
+ * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/|
+ * +----------------+----------------+----------------+----------------+
+ * | reserved | 40
+ * +----------------+----------------+----------------+----------------+
+ *
+ * abs_x - int32_t, absolute X position, in pixels
+ * abs_y - int32_t, absolute Y position, in pixels
+ *
+ * Multi-touch contact release event
+ * 0 1 2 3 octet
+ * +----------------+----------------+----------------+----------------+
+ * | _TYPE_MTOUCH | _MT_EV_UP | contact_id | reserved | 4
+ * +----------------+----------------+----------------+----------------+
+ * | reserved | 8
+ * +----------------+----------------+----------------+----------------+
+ * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/|
+ * +----------------+----------------+----------------+----------------+
+ * | reserved | 40
+ * +----------------+----------------+----------------+----------------+
+ *
+ * Multi-touch motion event
+ * 0 1 2 3 octet
+ * +----------------+----------------+----------------+----------------+
+ * | _TYPE_MTOUCH | _MT_EV_MOTION | contact_id | reserved | 4
+ * +----------------+----------------+----------------+----------------+
+ * | reserved | 8
+ * +----------------+----------------+----------------+----------------+
+ * | abs_x | 12
+ * +----------------+----------------+----------------+----------------+
+ * | abs_y | 16
+ * +----------------+----------------+----------------+----------------+
+ * | reserved | 20
+ * +----------------+----------------+----------------+----------------+
+ * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/|
+ * +----------------+----------------+----------------+----------------+
+ * | reserved | 40
+ * +----------------+----------------+----------------+----------------+
+ *
+ * abs_x - int32_t, absolute X position, in pixels,
+ * abs_y - int32_t, absolute Y position, in pixels,
+ *
+ * Multi-touch input synchronization event - shows end of a set of events
+ * which logically belong together.
+ * 0 1 2 3 octet
+ * +----------------+----------------+----------------+----------------+
+ * | _TYPE_MTOUCH | _MT_EV_SYN | contact_id | reserved | 4
+ * +----------------+----------------+----------------+----------------+
+ * | reserved | 8
+ * +----------------+----------------+----------------+----------------+
+ * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/|
+ * +----------------+----------------+----------------+----------------+
+ * | reserved | 40
+ * +----------------+----------------+----------------+----------------+
+ *
+ * Multi-touch shape event - touch point's shape has changed its shape.
+ * Shape is approximated by an ellipse through the major and minor axis
+ * lengths: major is the longer diameter of the ellipse and minor is the
+ * shorter one. Center of the ellipse is reported via
+ * XENKBD_MT_EV_DOWN/XENKBD_MT_EV_MOTION events.
+ * 0 1 2 3 octet
+ * +----------------+----------------+----------------+----------------+
+ * | _TYPE_MTOUCH | _MT_EV_SHAPE | contact_id | reserved | 4
+ * +----------------+----------------+----------------+----------------+
+ * | reserved | 8
+ * +----------------+----------------+----------------+----------------+
+ * | major | 12
+ * +----------------+----------------+----------------+----------------+
+ * | minor | 16
+ * +----------------+----------------+----------------+----------------+
+ * | reserved | 20
+ * +----------------+----------------+----------------+----------------+
+ * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/|
+ * +----------------+----------------+----------------+----------------+
+ * | reserved | 40
+ * +----------------+----------------+----------------+----------------+
+ *
+ * major - unt32_t, length of the major axis, pixels
+ * minor - unt32_t, length of the minor axis, pixels
+ *
+ * Multi-touch orientation event - touch point's shape has changed
+ * its orientation: calculated as a clockwise angle between the major axis
+ * of the ellipse and positive Y axis in degrees, [-180; +180].
+ * 0 1 2 3 octet
+ * +----------------+----------------+----------------+----------------+
+ * | _TYPE_MTOUCH | _MT_EV_ORIENT | contact_id | reserved | 4
+ * +----------------+----------------+----------------+----------------+
+ * | reserved | 8
+ * +----------------+----------------+----------------+----------------+
+ * | orientation | reserved | 12
+ * +----------------+----------------+----------------+----------------+
+ * | reserved | 16
+ * +----------------+----------------+----------------+----------------+
+ * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/|
+ * +----------------+----------------+----------------+----------------+
+ * | reserved | 40
+ * +----------------+----------------+----------------+----------------+
+ *
+ * orientation - int16_t, clockwise angle of the major axis
+ */
+
+struct xenkbd_mtouch {
+ uint8_t type; /* XENKBD_TYPE_MTOUCH */
+ uint8_t event_type; /* XENKBD_MT_EV_??? */
+ uint8_t contact_id;
+ uint8_t reserved[5]; /* reserved for the future use */
+ union {
+ struct {
+ int32_t abs_x; /* absolute X position, pixels */
+ int32_t abs_y; /* absolute Y position, pixels */
+ } pos;
+ struct {
+ uint32_t major; /* length of the major axis, pixels */
+ uint32_t minor; /* length of the minor axis, pixels */
+ } shape;
+ int16_t orientation; /* clockwise angle of the major axis */
+ } u;
+};
+
+#define XENKBD_IN_EVENT_SIZE 40
+
+union xenkbd_in_event
+{
+ uint8_t type;
+ struct xenkbd_motion motion;
+ struct xenkbd_key key;
+ struct xenkbd_position pos;
+ struct xenkbd_mtouch mtouch;
+ char pad[XENKBD_IN_EVENT_SIZE];
+};
+
+/*
+ *****************************************************************************
+ * Frontend to backend events
+ *****************************************************************************
+ *
+ * Out events may be sent only when requested by backend, and receipt
+ * of an unknown out event is an error.
+ * No out events currently defined.
+
+ * All event packets have the same length (40 octets)
+ * All event packets have common header:
+ * 0 octet
+ * +-----------------+
+ * | type |
+ * +-----------------+
+ * type - uint8_t, event code
+ */
+
+#define XENKBD_OUT_EVENT_SIZE 40
+
+union xenkbd_out_event
+{
+ uint8_t type;
+ char pad[XENKBD_OUT_EVENT_SIZE];
+};
+
+/*
+ *****************************************************************************
+ * Shared page
+ *****************************************************************************
+ */
+
+#define XENKBD_IN_RING_SIZE 2048
+#define XENKBD_IN_RING_LEN (XENKBD_IN_RING_SIZE / XENKBD_IN_EVENT_SIZE)
+#define XENKBD_IN_RING_OFFS 1024
+#define XENKBD_IN_RING(page) \
+ ((union xenkbd_in_event *)((char *)(page) + XENKBD_IN_RING_OFFS))
+#define XENKBD_IN_RING_REF(page, idx) \
+ (XENKBD_IN_RING((page))[(idx) % XENKBD_IN_RING_LEN])
+
+#define XENKBD_OUT_RING_SIZE 1024
+#define XENKBD_OUT_RING_LEN (XENKBD_OUT_RING_SIZE / XENKBD_OUT_EVENT_SIZE)
+#define XENKBD_OUT_RING_OFFS (XENKBD_IN_RING_OFFS + XENKBD_IN_RING_SIZE)
+#define XENKBD_OUT_RING(page) \
+ ((union xenkbd_out_event *)((char *)(page) + XENKBD_OUT_RING_OFFS))
+#define XENKBD_OUT_RING_REF(page, idx) \
+ (XENKBD_OUT_RING((page))[(idx) % XENKBD_OUT_RING_LEN])
+
+struct xenkbd_page
+{
+ uint32_t in_cons, in_prod;
+ uint32_t out_cons, out_prod;
+};
+
+#endif /* XEN_PUBLIC_IO_KBDIF_H */
new file mode 100644
@@ -0,0 +1,1010 @@
+/******************************************************************************
+ * netif.h
+ *
+ * Unified network-device I/O interface for Xen guest OSes.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to
+ * deal in the Software without restriction, including without limitation the
+ * rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Copyright (c) 2003-2004, Keir Fraser
+ */
+
+#ifndef XEN_PUBLIC_IO_NETIF_H
+#define XEN_PUBLIC_IO_NETIF_H
+
+#include "ring.h"
+#include "../grant_table.h"
+
+/*
+ * Older implementation of Xen network frontend / backend has an
+ * implicit dependency on the MAX_SKB_FRAGS as the maximum number of
+ * ring slots a skb can use. Netfront / netback may not work as
+ * expected when frontend and backend have different MAX_SKB_FRAGS.
+ *
+ * A better approach is to add mechanism for netfront / netback to
+ * negotiate this value. However we cannot fix all possible
+ * frontends, so we need to define a value which states the minimum
+ * slots backend must support.
+ *
+ * The minimum value derives from older Linux kernel's MAX_SKB_FRAGS
+ * (18), which is proved to work with most frontends. Any new backend
+ * which doesn't negotiate with frontend should expect frontend to
+ * send a valid packet using slots up to this value.
+ */
+#define XEN_NETIF_NR_SLOTS_MIN 18
+
+/*
+ * Notifications after enqueuing any type of message should be conditional on
+ * the appropriate req_event or rsp_event field in the shared ring.
+ * If the client sends notification for rx requests then it should specify
+ * feature 'feature-rx-notify' via xenbus. Otherwise the backend will assume
+ * that it cannot safely queue packets (as it may not be kicked to send them).
+ */
+
+/*
+ * "feature-split-event-channels" is introduced to separate guest TX
+ * and RX notification. Backend either doesn't support this feature or
+ * advertises it via xenstore as 0 (disabled) or 1 (enabled).
+ *
+ * To make use of this feature, frontend should allocate two event
+ * channels for TX and RX, advertise them to backend as
+ * "event-channel-tx" and "event-channel-rx" respectively. If frontend
+ * doesn't want to use this feature, it just writes "event-channel"
+ * node as before.
+ */
+
+/*
+ * Multiple transmit and receive queues:
+ * If supported, the backend will write the key "multi-queue-max-queues" to
+ * the directory for that vif, and set its value to the maximum supported
+ * number of queues.
+ * Frontends that are aware of this feature and wish to use it can write the
+ * key "multi-queue-num-queues", set to the number they wish to use, which
+ * must be greater than zero, and no more than the value reported by the backend
+ * in "multi-queue-max-queues".
+ *
+ * Queues replicate the shared rings and event channels.
+ * "feature-split-event-channels" may optionally be used when using
+ * multiple queues, but is not mandatory.
+ *
+ * Each queue consists of one shared ring pair, i.e. there must be the same
+ * number of tx and rx rings.
+ *
+ * For frontends requesting just one queue, the usual event-channel and
+ * ring-ref keys are written as before, simplifying the backend processing
+ * to avoid distinguishing between a frontend that doesn't understand the
+ * multi-queue feature, and one that does, but requested only one queue.
+ *
+ * Frontends requesting two or more queues must not write the toplevel
+ * event-channel (or event-channel-{tx,rx}) and {tx,rx}-ring-ref keys,
+ * instead writing those keys under sub-keys having the name "queue-N" where
+ * N is the integer ID of the queue for which those keys belong. Queues
+ * are indexed from zero. For example, a frontend with two queues and split
+ * event channels must write the following set of queue-related keys:
+ *
+ * /local/domain/1/device/vif/0/multi-queue-num-queues = "2"
+ * /local/domain/1/device/vif/0/queue-0 = ""
+ * /local/domain/1/device/vif/0/queue-0/tx-ring-ref = "<ring-ref-tx0>"
+ * /local/domain/1/device/vif/0/queue-0/rx-ring-ref = "<ring-ref-rx0>"
+ * /local/domain/1/device/vif/0/queue-0/event-channel-tx = "<evtchn-tx0>"
+ * /local/domain/1/device/vif/0/queue-0/event-channel-rx = "<evtchn-rx0>"
+ * /local/domain/1/device/vif/0/queue-1 = ""
+ * /local/domain/1/device/vif/0/queue-1/tx-ring-ref = "<ring-ref-tx1>"
+ * /local/domain/1/device/vif/0/queue-1/rx-ring-ref = "<ring-ref-rx1"
+ * /local/domain/1/device/vif/0/queue-1/event-channel-tx = "<evtchn-tx1>"
+ * /local/domain/1/device/vif/0/queue-1/event-channel-rx = "<evtchn-rx1>"
+ *
+ * If there is any inconsistency in the XenStore data, the backend may
+ * choose not to connect any queues, instead treating the request as an
+ * error. This includes scenarios where more (or fewer) queues were
+ * requested than the frontend provided details for.
+ *
+ * Mapping of packets to queues is considered to be a function of the
+ * transmitting system (backend or frontend) and is not negotiated
+ * between the two. Guests are free to transmit packets on any queue
+ * they choose, provided it has been set up correctly. Guests must be
+ * prepared to receive packets on any queue they have requested be set up.
+ */
+
+/*
+ * "feature-no-csum-offload" should be used to turn IPv4 TCP/UDP checksum
+ * offload off or on. If it is missing then the feature is assumed to be on.
+ * "feature-ipv6-csum-offload" should be used to turn IPv6 TCP/UDP checksum
+ * offload on or off. If it is missing then the feature is assumed to be off.
+ */
+
+/*
+ * "feature-gso-tcpv4" and "feature-gso-tcpv6" advertise the capability to
+ * handle large TCP packets (in IPv4 or IPv6 form respectively). Neither
+ * frontends nor backends are assumed to be capable unless the flags are
+ * present.
+ */
+
+/*
+ * "feature-multicast-control" and "feature-dynamic-multicast-control"
+ * advertise the capability to filter ethernet multicast packets in the
+ * backend. If the frontend wishes to take advantage of this feature then
+ * it may set "request-multicast-control". If the backend only advertises
+ * "feature-multicast-control" then "request-multicast-control" must be set
+ * before the frontend moves into the connected state. The backend will
+ * sample the value on this state transition and any subsequent change in
+ * value will have no effect. However, if the backend also advertises
+ * "feature-dynamic-multicast-control" then "request-multicast-control"
+ * may be set by the frontend at any time. In this case, the backend will
+ * watch the value and re-sample on watch events.
+ *
+ * If the sampled value of "request-multicast-control" is set then the
+ * backend transmit side should no longer flood multicast packets to the
+ * frontend, it should instead drop any multicast packet that does not
+ * match in a filter list.
+ * The list is amended by the frontend by sending dummy transmit requests
+ * containing XEN_NETIF_EXTRA_TYPE_MCAST_{ADD,DEL} extra-info fragments as
+ * specified below.
+ * Note that the filter list may be amended even if the sampled value of
+ * "request-multicast-control" is not set, however the filter should only
+ * be applied if it is set.
+ */
+
+/*
+ * Control ring
+ * ============
+ *
+ * Some features, such as hashing (detailed below), require a
+ * significant amount of out-of-band data to be passed from frontend to
+ * backend. Use of xenstore is not suitable for large quantities of data
+ * because of quota limitations and so a dedicated 'control ring' is used.
+ * The ability of the backend to use a control ring is advertised by
+ * setting:
+ *
+ * /local/domain/X/backend/<domid>/<vif>/feature-ctrl-ring = "1"
+ *
+ * The frontend provides a control ring to the backend by setting:
+ *
+ * /local/domain/<domid>/device/vif/<vif>/ctrl-ring-ref = <gref>
+ * /local/domain/<domid>/device/vif/<vif>/event-channel-ctrl = <port>
+ *
+ * where <gref> is the grant reference of the shared page used to
+ * implement the control ring and <port> is an event channel to be used
+ * as a mailbox interrupt. These keys must be set before the frontend
+ * moves into the connected state.
+ *
+ * The control ring uses a fixed request/response message size and is
+ * balanced (i.e. one request to one response), so operationally it is much
+ * the same as a transmit or receive ring.
+ * Note that there is no requirement that responses are issued in the same
+ * order as requests.
+ */
+
+/*
+ * Hash types
+ * ==========
+ *
+ * For the purposes of the definitions below, 'Packet[]' is an array of
+ * octets containing an IP packet without options, 'Array[X..Y]' means a
+ * sub-array of 'Array' containing bytes X thru Y inclusive, and '+' is
+ * used to indicate concatenation of arrays.
+ */
+
+/*
+ * A hash calculated over an IP version 4 header as follows:
+ *
+ * Buffer[0..8] = Packet[12..15] (source address) +
+ * Packet[16..19] (destination address)
+ *
+ * Result = Hash(Buffer, 8)
+ */
+#define _XEN_NETIF_CTRL_HASH_TYPE_IPV4 0
+#define XEN_NETIF_CTRL_HASH_TYPE_IPV4 \
+ (1 << _XEN_NETIF_CTRL_HASH_TYPE_IPV4)
+
+/*
+ * A hash calculated over an IP version 4 header and TCP header as
+ * follows:
+ *
+ * Buffer[0..12] = Packet[12..15] (source address) +
+ * Packet[16..19] (destination address) +
+ * Packet[20..21] (source port) +
+ * Packet[22..23] (destination port)
+ *
+ * Result = Hash(Buffer, 12)
+ */
+#define _XEN_NETIF_CTRL_HASH_TYPE_IPV4_TCP 1
+#define XEN_NETIF_CTRL_HASH_TYPE_IPV4_TCP \
+ (1 << _XEN_NETIF_CTRL_HASH_TYPE_IPV4_TCP)
+
+/*
+ * A hash calculated over an IP version 6 header as follows:
+ *
+ * Buffer[0..32] = Packet[8..23] (source address ) +
+ * Packet[24..39] (destination address)
+ *
+ * Result = Hash(Buffer, 32)
+ */
+#define _XEN_NETIF_CTRL_HASH_TYPE_IPV6 2
+#define XEN_NETIF_CTRL_HASH_TYPE_IPV6 \
+ (1 << _XEN_NETIF_CTRL_HASH_TYPE_IPV6)
+
+/*
+ * A hash calculated over an IP version 6 header and TCP header as
+ * follows:
+ *
+ * Buffer[0..36] = Packet[8..23] (source address) +
+ * Packet[24..39] (destination address) +
+ * Packet[40..41] (source port) +
+ * Packet[42..43] (destination port)
+ *
+ * Result = Hash(Buffer, 36)
+ */
+#define _XEN_NETIF_CTRL_HASH_TYPE_IPV6_TCP 3
+#define XEN_NETIF_CTRL_HASH_TYPE_IPV6_TCP \
+ (1 << _XEN_NETIF_CTRL_HASH_TYPE_IPV6_TCP)
+
+/*
+ * Hash algorithms
+ * ===============
+ */
+
+#define XEN_NETIF_CTRL_HASH_ALGORITHM_NONE 0
+
+/*
+ * Toeplitz hash:
+ */
+
+#define XEN_NETIF_CTRL_HASH_ALGORITHM_TOEPLITZ 1
+
+/*
+ * Control requests (struct xen_netif_ctrl_request)
+ * ================================================
+ *
+ * All requests have the following format:
+ *
+ * 0 1 2 3 4 5 6 7 octet
+ * +-----+-----+-----+-----+-----+-----+-----+-----+
+ * | id | type | data[0] |
+ * +-----+-----+-----+-----+-----+-----+-----+-----+
+ * | data[1] | data[2] |
+ * +-----+-----+-----+-----+-----------------------+
+ *
+ * id: the request identifier, echoed in response.
+ * type: the type of request (see below)
+ * data[]: any data associated with the request (determined by type)
+ */
+
+struct xen_netif_ctrl_request {
+ uint16_t id;
+ uint16_t type;
+
+#define XEN_NETIF_CTRL_TYPE_INVALID 0
+#define XEN_NETIF_CTRL_TYPE_GET_HASH_FLAGS 1
+#define XEN_NETIF_CTRL_TYPE_SET_HASH_FLAGS 2
+#define XEN_NETIF_CTRL_TYPE_SET_HASH_KEY 3
+#define XEN_NETIF_CTRL_TYPE_GET_HASH_MAPPING_SIZE 4
+#define XEN_NETIF_CTRL_TYPE_SET_HASH_MAPPING_SIZE 5
+#define XEN_NETIF_CTRL_TYPE_SET_HASH_MAPPING 6
+#define XEN_NETIF_CTRL_TYPE_SET_HASH_ALGORITHM 7
+#define XEN_NETIF_CTRL_TYPE_GET_GREF_MAPPING_SIZE 8
+#define XEN_NETIF_CTRL_TYPE_ADD_GREF_MAPPING 9
+#define XEN_NETIF_CTRL_TYPE_DEL_GREF_MAPPING 10
+
+ uint32_t data[3];
+};
+
+/*
+ * Control responses (struct xen_netif_ctrl_response)
+ * ==================================================
+ *
+ * All responses have the following format:
+ *
+ * 0 1 2 3 4 5 6 7 octet
+ * +-----+-----+-----+-----+-----+-----+-----+-----+
+ * | id | type | status |
+ * +-----+-----+-----+-----+-----+-----+-----+-----+
+ * | data |
+ * +-----+-----+-----+-----+
+ *
+ * id: the corresponding request identifier
+ * type: the type of the corresponding request
+ * status: the status of request processing
+ * data: any data associated with the response (determined by type and
+ * status)
+ */
+
+struct xen_netif_ctrl_response {
+ uint16_t id;
+ uint16_t type;
+ uint32_t status;
+
+#define XEN_NETIF_CTRL_STATUS_SUCCESS 0
+#define XEN_NETIF_CTRL_STATUS_NOT_SUPPORTED 1
+#define XEN_NETIF_CTRL_STATUS_INVALID_PARAMETER 2
+#define XEN_NETIF_CTRL_STATUS_BUFFER_OVERFLOW 3
+
+ uint32_t data;
+};
+
+/*
+ * Static Grants (struct xen_netif_gref)
+ * =====================================
+ *
+ * A frontend may provide a fixed set of grant references to be mapped on
+ * the backend. The message of type XEN_NETIF_CTRL_TYPE_ADD_GREF_MAPPING
+ * prior its usage in the command ring allows for creation of these mappings.
+ * The backend will maintain a fixed amount of these mappings.
+ *
+ * XEN_NETIF_CTRL_TYPE_GET_GREF_MAPPING_SIZE lets a frontend query how many
+ * of these mappings can be kept.
+ *
+ * Each entry in the XEN_NETIF_CTRL_TYPE_{ADD,DEL}_GREF_MAPPING input table has
+ * the following format:
+ *
+ * 0 1 2 3 4 5 6 7 octet
+ * +-----+-----+-----+-----+-----+-----+-----+-----+
+ * | grant ref | flags | status |
+ * +-----+-----+-----+-----+-----+-----+-----+-----+
+ *
+ * grant ref: grant reference (IN)
+ * flags: flags describing the control operation (IN)
+ * status: XEN_NETIF_CTRL_STATUS_* (OUT)
+ *
+ * 'status' is an output parameter which does not require to be set to zero
+ * prior to its usage in the corresponding control messages.
+ */
+
+struct xen_netif_gref {
+ grant_ref_t ref;
+ uint16_t flags;
+
+#define _XEN_NETIF_CTRLF_GREF_readonly 0
+#define XEN_NETIF_CTRLF_GREF_readonly (1U<<_XEN_NETIF_CTRLF_GREF_readonly)
+
+ uint16_t status;
+};
+
+/*
+ * Control messages
+ * ================
+ *
+ * XEN_NETIF_CTRL_TYPE_SET_HASH_ALGORITHM
+ * --------------------------------------
+ *
+ * This is sent by the frontend to set the desired hash algorithm.
+ *
+ * Request:
+ *
+ * type = XEN_NETIF_CTRL_TYPE_SET_HASH_ALGORITHM
+ * data[0] = a XEN_NETIF_CTRL_HASH_ALGORITHM_* value
+ * data[1] = 0
+ * data[2] = 0
+ *
+ * Response:
+ *
+ * status = XEN_NETIF_CTRL_STATUS_NOT_SUPPORTED - Operation not
+ * supported
+ * XEN_NETIF_CTRL_STATUS_INVALID_PARAMETER - The algorithm is not
+ * supported
+ * XEN_NETIF_CTRL_STATUS_SUCCESS - Operation successful
+ *
+ * NOTE: Setting data[0] to XEN_NETIF_CTRL_HASH_ALGORITHM_NONE disables
+ * hashing and the backend is free to choose how it steers packets
+ * to queues (which is the default behaviour).
+ *
+ * XEN_NETIF_CTRL_TYPE_GET_HASH_FLAGS
+ * ----------------------------------
+ *
+ * This is sent by the frontend to query the types of hash supported by
+ * the backend.
+ *
+ * Request:
+ *
+ * type = XEN_NETIF_CTRL_TYPE_GET_HASH_FLAGS
+ * data[0] = 0
+ * data[1] = 0
+ * data[2] = 0
+ *
+ * Response:
+ *
+ * status = XEN_NETIF_CTRL_STATUS_NOT_SUPPORTED - Operation not supported
+ * XEN_NETIF_CTRL_STATUS_SUCCESS - Operation successful
+ * data = supported hash types (if operation was successful)
+ *
+ * NOTE: A valid hash algorithm must be selected before this operation can
+ * succeed.
+ *
+ * XEN_NETIF_CTRL_TYPE_SET_HASH_FLAGS
+ * ----------------------------------
+ *
+ * This is sent by the frontend to set the types of hash that the backend
+ * should calculate. (See above for hash type definitions).
+ * Note that the 'maximal' type of hash should always be chosen. For
+ * example, if the frontend sets both IPV4 and IPV4_TCP hash types then
+ * the latter hash type should be calculated for any TCP packet and the
+ * former only calculated for non-TCP packets.
+ *
+ * Request:
+ *
+ * type = XEN_NETIF_CTRL_TYPE_SET_HASH_FLAGS
+ * data[0] = bitwise OR of XEN_NETIF_CTRL_HASH_TYPE_* values
+ * data[1] = 0
+ * data[2] = 0
+ *
+ * Response:
+ *
+ * status = XEN_NETIF_CTRL_STATUS_NOT_SUPPORTED - Operation not
+ * supported
+ * XEN_NETIF_CTRL_STATUS_INVALID_PARAMETER - One or more flag
+ * value is invalid or
+ * unsupported
+ * XEN_NETIF_CTRL_STATUS_SUCCESS - Operation successful
+ * data = 0
+ *
+ * NOTE: A valid hash algorithm must be selected before this operation can
+ * succeed.
+ * Also, setting data[0] to zero disables hashing and the backend
+ * is free to choose how it steers packets to queues.
+ *
+ * XEN_NETIF_CTRL_TYPE_SET_HASH_KEY
+ * --------------------------------
+ *
+ * This is sent by the frontend to set the key of the hash if the algorithm
+ * requires it. (See hash algorithms above).
+ *
+ * Request:
+ *
+ * type = XEN_NETIF_CTRL_TYPE_SET_HASH_KEY
+ * data[0] = grant reference of page containing the key (assumed to
+ * start at beginning of grant)
+ * data[1] = size of key in octets
+ * data[2] = 0
+ *
+ * Response:
+ *
+ * status = XEN_NETIF_CTRL_STATUS_NOT_SUPPORTED - Operation not
+ * supported
+ * XEN_NETIF_CTRL_STATUS_INVALID_PARAMETER - Key size is invalid
+ * XEN_NETIF_CTRL_STATUS_BUFFER_OVERFLOW - Key size is larger
+ * than the backend
+ * supports
+ * XEN_NETIF_CTRL_STATUS_SUCCESS - Operation successful
+ * data = 0
+ *
+ * NOTE: Any key octets not specified are assumed to be zero (the key
+ * is assumed to be empty by default) and specifying a new key
+ * invalidates any previous key, hence specifying a key size of
+ * zero will clear the key (which ensures that the calculated hash
+ * will always be zero).
+ * The maximum size of key is algorithm and backend specific, but
+ * is also limited by the single grant reference.
+ * The grant reference may be read-only and must remain valid until
+ * the response has been processed.
+ *
+ * XEN_NETIF_CTRL_TYPE_GET_HASH_MAPPING_SIZE
+ * -----------------------------------------
+ *
+ * This is sent by the frontend to query the maximum size of mapping
+ * table supported by the backend. The size is specified in terms of
+ * table entries.
+ *
+ * Request:
+ *
+ * type = XEN_NETIF_CTRL_TYPE_GET_HASH_MAPPING_SIZE
+ * data[0] = 0
+ * data[1] = 0
+ * data[2] = 0
+ *
+ * Response:
+ *
+ * status = XEN_NETIF_CTRL_STATUS_NOT_SUPPORTED - Operation not supported
+ * XEN_NETIF_CTRL_STATUS_SUCCESS - Operation successful
+ * data = maximum number of entries allowed in the mapping table
+ * (if operation was successful) or zero if a mapping table is
+ * not supported (i.e. hash mapping is done only by modular
+ * arithmetic).
+ *
+ * XEN_NETIF_CTRL_TYPE_SET_HASH_MAPPING_SIZE
+ * -------------------------------------
+ *
+ * This is sent by the frontend to set the actual size of the mapping
+ * table to be used by the backend. The size is specified in terms of
+ * table entries.
+ * Any previous table is invalidated by this message and any new table
+ * is assumed to be zero filled.
+ *
+ * Request:
+ *
+ * type = XEN_NETIF_CTRL_TYPE_SET_HASH_MAPPING_SIZE
+ * data[0] = number of entries in mapping table
+ * data[1] = 0
+ * data[2] = 0
+ *
+ * Response:
+ *
+ * status = XEN_NETIF_CTRL_STATUS_NOT_SUPPORTED - Operation not
+ * supported
+ * XEN_NETIF_CTRL_STATUS_INVALID_PARAMETER - Table size is invalid
+ * XEN_NETIF_CTRL_STATUS_SUCCESS - Operation successful
+ * data = 0
+ *
+ * NOTE: Setting data[0] to 0 means that hash mapping should be done
+ * using modular arithmetic.
+ *
+ * XEN_NETIF_CTRL_TYPE_SET_HASH_MAPPING
+ * ------------------------------------
+ *
+ * This is sent by the frontend to set the content of the table mapping
+ * hash value to queue number. The backend should calculate the hash from
+ * the packet header, use it as an index into the table (modulo the size
+ * of the table) and then steer the packet to the queue number found at
+ * that index.
+ *
+ * Request:
+ *
+ * type = XEN_NETIF_CTRL_TYPE_SET_HASH_MAPPING
+ * data[0] = grant reference of page containing the mapping (sub-)table
+ * (assumed to start at beginning of grant)
+ * data[1] = size of (sub-)table in entries
+ * data[2] = offset, in entries, of sub-table within overall table
+ *
+ * Response:
+ *
+ * status = XEN_NETIF_CTRL_STATUS_NOT_SUPPORTED - Operation not
+ * supported
+ * XEN_NETIF_CTRL_STATUS_INVALID_PARAMETER - Table size or content
+ * is invalid
+ * XEN_NETIF_CTRL_STATUS_BUFFER_OVERFLOW - Table size is larger
+ * than the backend
+ * supports
+ * XEN_NETIF_CTRL_STATUS_SUCCESS - Operation successful
+ * data = 0
+ *
+ * NOTE: The overall table has the following format:
+ *
+ * 0 1 2 3 4 5 6 7 octet
+ * +-----+-----+-----+-----+-----+-----+-----+-----+
+ * | mapping[0] | mapping[1] |
+ * +-----+-----+-----+-----+-----+-----+-----+-----+
+ * | . |
+ * | . |
+ * | . |
+ * +-----+-----+-----+-----+-----+-----+-----+-----+
+ * | mapping[N-2] | mapping[N-1] |
+ * +-----+-----+-----+-----+-----+-----+-----+-----+
+ *
+ * where N is specified by a XEN_NETIF_CTRL_TYPE_SET_HASH_MAPPING_SIZE
+ * message and each mapping must specifies a queue between 0 and
+ * "multi-queue-num-queues" (see above).
+ * The backend may support a mapping table larger than can be
+ * mapped by a single grant reference. Thus sub-tables within a
+ * larger table can be individually set by sending multiple messages
+ * with differing offset values. Specifying a new sub-table does not
+ * invalidate any table data outside that range.
+ * The grant reference may be read-only and must remain valid until
+ * the response has been processed.
+ *
+ * XEN_NETIF_CTRL_TYPE_GET_GREF_MAPPING_SIZE
+ * -----------------------------------------
+ *
+ * This is sent by the frontend to fetch the number of grefs that can be kept
+ * mapped in the backend.
+ *
+ * Request:
+ *
+ * type = XEN_NETIF_CTRL_TYPE_GET_GREF_MAPPING_SIZE
+ * data[0] = queue index (assumed 0 for single queue)
+ * data[1] = 0
+ * data[2] = 0
+ *
+ * Response:
+ *
+ * status = XEN_NETIF_CTRL_STATUS_NOT_SUPPORTED - Operation not
+ * supported
+ * XEN_NETIF_CTRL_STATUS_INVALID_PARAMETER - The queue index is
+ * out of range
+ * XEN_NETIF_CTRL_STATUS_SUCCESS - Operation successful
+ * data = maximum number of entries allowed in the gref mapping table
+ * (if operation was successful) or zero if it is not supported.
+ *
+ * XEN_NETIF_CTRL_TYPE_ADD_GREF_MAPPING
+ * ------------------------------------
+ *
+ * This is sent by the frontend for backend to map a list of grant
+ * references.
+ *
+ * Request:
+ *
+ * type = XEN_NETIF_CTRL_TYPE_ADD_GREF_MAPPING
+ * data[0] = queue index
+ * data[1] = grant reference of page containing the mapping list
+ * (r/w and assumed to start at beginning of page)
+ * data[2] = size of list in entries
+ *
+ * Response:
+ *
+ * status = XEN_NETIF_CTRL_STATUS_NOT_SUPPORTED - Operation not
+ * supported
+ * XEN_NETIF_CTRL_STATUS_INVALID_PARAMETER - Operation failed
+ * XEN_NETIF_CTRL_STATUS_SUCCESS - Operation successful
+ *
+ * NOTE: Each entry in the input table has the format outlined
+ * in struct xen_netif_gref.
+ * Contrary to XEN_NETIF_CTRL_TYPE_DEL_GREF_MAPPING, the struct
+ * xen_netif_gref 'status' field is not used and therefore the response
+ * 'status' determines the success of this operation. In case of
+ * failure none of grants mappings get added in the backend.
+ *
+ * XEN_NETIF_CTRL_TYPE_DEL_GREF_MAPPING
+ * ------------------------------------
+ *
+ * This is sent by the frontend for backend to unmap a list of grant
+ * references.
+ *
+ * Request:
+ *
+ * type = XEN_NETIF_CTRL_TYPE_DEL_GREF_MAPPING
+ * data[0] = queue index
+ * data[1] = grant reference of page containing the mapping list
+ * (r/w and assumed to start at beginning of page)
+ * data[2] = size of list in entries
+ *
+ * Response:
+ *
+ * status = XEN_NETIF_CTRL_STATUS_NOT_SUPPORTED - Operation not
+ * supported
+ * XEN_NETIF_CTRL_STATUS_INVALID_PARAMETER - Operation failed
+ * XEN_NETIF_CTRL_STATUS_SUCCESS - Operation successful
+ * data = number of entries that were unmapped
+ *
+ * NOTE: Each entry in the input table has the format outlined in struct
+ * xen_netif_gref.
+ * The struct xen_netif_gref 'status' field determines if the entry
+ * was successfully removed.
+ * The entries used are only the ones representing grant references that
+ * were previously the subject of a XEN_NETIF_CTRL_TYPE_ADD_GREF_MAPPING
+ * operation. Any other entries will have their status set to
+ * XEN_NETIF_CTRL_STATUS_INVALID_PARAMETER upon completion.
+ */
+
+DEFINE_RING_TYPES(xen_netif_ctrl,
+ struct xen_netif_ctrl_request,
+ struct xen_netif_ctrl_response);
+
+/*
+ * Guest transmit
+ * ==============
+ *
+ * This is the 'wire' format for transmit (frontend -> backend) packets:
+ *
+ * Fragment 1: netif_tx_request_t - flags = NETTXF_*
+ * size = total packet size
+ * [Extra 1: netif_extra_info_t] - (only if fragment 1 flags include
+ * NETTXF_extra_info)
+ * ...
+ * [Extra N: netif_extra_info_t] - (only if extra N-1 flags include
+ * XEN_NETIF_EXTRA_MORE)
+ * ...
+ * Fragment N: netif_tx_request_t - (only if fragment N-1 flags include
+ * NETTXF_more_data - flags on preceding
+ * extras are not relevant here)
+ * flags = 0
+ * size = fragment size
+ *
+ * NOTE:
+ *
+ * This format slightly is different from that used for receive
+ * (backend -> frontend) packets. Specifically, in a multi-fragment
+ * packet the actual size of fragment 1 can only be determined by
+ * subtracting the sizes of fragments 2..N from the total packet size.
+ *
+ * Ring slot size is 12 octets, however not all request/response
+ * structs use the full size.
+ *
+ * tx request data (netif_tx_request_t)
+ * ------------------------------------
+ *
+ * 0 1 2 3 4 5 6 7 octet
+ * +-----+-----+-----+-----+-----+-----+-----+-----+
+ * | grant ref | offset | flags |
+ * +-----+-----+-----+-----+-----+-----+-----+-----+
+ * | id | size |
+ * +-----+-----+-----+-----+
+ *
+ * grant ref: Reference to buffer page.
+ * offset: Offset within buffer page.
+ * flags: NETTXF_*.
+ * id: request identifier, echoed in response.
+ * size: packet size in bytes.
+ *
+ * tx response (netif_tx_response_t)
+ * ---------------------------------
+ *
+ * 0 1 2 3 4 5 6 7 octet
+ * +-----+-----+-----+-----+-----+-----+-----+-----+
+ * | id | status | unused |
+ * +-----+-----+-----+-----+-----+-----+-----+-----+
+ * | unused |
+ * +-----+-----+-----+-----+
+ *
+ * id: reflects id in transmit request
+ * status: NETIF_RSP_*
+ *
+ * Guest receive
+ * =============
+ *
+ * This is the 'wire' format for receive (backend -> frontend) packets:
+ *
+ * Fragment 1: netif_rx_request_t - flags = NETRXF_*
+ * size = fragment size
+ * [Extra 1: netif_extra_info_t] - (only if fragment 1 flags include
+ * NETRXF_extra_info)
+ * ...
+ * [Extra N: netif_extra_info_t] - (only if extra N-1 flags include
+ * XEN_NETIF_EXTRA_MORE)
+ * ...
+ * Fragment N: netif_rx_request_t - (only if fragment N-1 flags include
+ * NETRXF_more_data - flags on preceding
+ * extras are not relevant here)
+ * flags = 0
+ * size = fragment size
+ *
+ * NOTE:
+ *
+ * This format slightly is different from that used for transmit
+ * (frontend -> backend) packets. Specifically, in a multi-fragment
+ * packet the size of the packet can only be determined by summing the
+ * sizes of fragments 1..N.
+ *
+ * Ring slot size is 8 octets.
+ *
+ * rx request (netif_rx_request_t)
+ * -------------------------------
+ *
+ * 0 1 2 3 4 5 6 7 octet
+ * +-----+-----+-----+-----+-----+-----+-----+-----+
+ * | id | pad | gref |
+ * +-----+-----+-----+-----+-----+-----+-----+-----+
+ *
+ * id: request identifier, echoed in response.
+ * gref: reference to incoming granted frame.
+ *
+ * rx response (netif_rx_response_t)
+ * ---------------------------------
+ *
+ * 0 1 2 3 4 5 6 7 octet
+ * +-----+-----+-----+-----+-----+-----+-----+-----+
+ * | id | offset | flags | status |
+ * +-----+-----+-----+-----+-----+-----+-----+-----+
+ *
+ * id: reflects id in receive request
+ * offset: offset in page of start of received packet
+ * flags: NETRXF_*
+ * status: -ve: NETIF_RSP_*; +ve: Rx'ed pkt size.
+ *
+ * NOTE: Historically, to support GSO on the frontend receive side, Linux
+ * netfront does not make use of the rx response id (because, as
+ * described below, extra info structures overlay the id field).
+ * Instead it assumes that responses always appear in the same ring
+ * slot as their corresponding request. Thus, to maintain
+ * compatibility, backends must make sure this is the case.
+ *
+ * Extra Info
+ * ==========
+ *
+ * Can be present if initial request or response has NET{T,R}XF_extra_info,
+ * or previous extra request has XEN_NETIF_EXTRA_MORE.
+ *
+ * The struct therefore needs to fit into either a tx or rx slot and
+ * is therefore limited to 8 octets.
+ *
+ * NOTE: Because extra info data overlays the usual request/response
+ * structures, there is no id information in the opposite direction.
+ * So, if an extra info overlays an rx response the frontend can
+ * assume that it is in the same ring slot as the request that was
+ * consumed to make the slot available, and the backend must ensure
+ * this assumption is true.
+ *
+ * extra info (netif_extra_info_t)
+ * -------------------------------
+ *
+ * General format:
+ *
+ * 0 1 2 3 4 5 6 7 octet
+ * +-----+-----+-----+-----+-----+-----+-----+-----+
+ * |type |flags| type specific data |
+ * +-----+-----+-----+-----+-----+-----+-----+-----+
+ * | padding for tx |
+ * +-----+-----+-----+-----+
+ *
+ * type: XEN_NETIF_EXTRA_TYPE_*
+ * flags: XEN_NETIF_EXTRA_FLAG_*
+ * padding for tx: present only in the tx case due to 8 octet limit
+ * from rx case. Not shown in type specific entries
+ * below.
+ *
+ * XEN_NETIF_EXTRA_TYPE_GSO:
+ *
+ * 0 1 2 3 4 5 6 7 octet
+ * +-----+-----+-----+-----+-----+-----+-----+-----+
+ * |type |flags| size |type | pad | features |
+ * +-----+-----+-----+-----+-----+-----+-----+-----+
+ *
+ * type: Must be XEN_NETIF_EXTRA_TYPE_GSO
+ * flags: XEN_NETIF_EXTRA_FLAG_*
+ * size: Maximum payload size of each segment. For example,
+ * for TCP this is just the path MSS.
+ * type: XEN_NETIF_GSO_TYPE_*: This determines the protocol of
+ * the packet and any extra features required to segment the
+ * packet properly.
+ * features: EN_NETIF_GSO_FEAT_*: This specifies any extra GSO
+ * features required to process this packet, such as ECN
+ * support for TCPv4.
+ *
+ * XEN_NETIF_EXTRA_TYPE_MCAST_{ADD,DEL}:
+ *
+ * 0 1 2 3 4 5 6 7 octet
+ * +-----+-----+-----+-----+-----+-----+-----+-----+
+ * |type |flags| addr |
+ * +-----+-----+-----+-----+-----+-----+-----+-----+
+ *
+ * type: Must be XEN_NETIF_EXTRA_TYPE_MCAST_{ADD,DEL}
+ * flags: XEN_NETIF_EXTRA_FLAG_*
+ * addr: address to add/remove
+ *
+ * XEN_NETIF_EXTRA_TYPE_HASH:
+ *
+ * A backend that supports teoplitz hashing is assumed to accept
+ * this type of extra info in transmit packets.
+ * A frontend that enables hashing is assumed to accept
+ * this type of extra info in receive packets.
+ *
+ * 0 1 2 3 4 5 6 7 octet
+ * +-----+-----+-----+-----+-----+-----+-----+-----+
+ * |type |flags|htype| alg |LSB ---- value ---- MSB|
+ * +-----+-----+-----+-----+-----+-----+-----+-----+
+ *
+ * type: Must be XEN_NETIF_EXTRA_TYPE_HASH
+ * flags: XEN_NETIF_EXTRA_FLAG_*
+ * htype: Hash type (one of _XEN_NETIF_CTRL_HASH_TYPE_* - see above)
+ * alg: The algorithm used to calculate the hash (one of
+ * XEN_NETIF_CTRL_HASH_TYPE_ALGORITHM_* - see above)
+ * value: Hash value
+ */
+
+/* Protocol checksum field is blank in the packet (hardware offload)? */
+#define _NETTXF_csum_blank (0)
+#define NETTXF_csum_blank (1U<<_NETTXF_csum_blank)
+
+/* Packet data has been validated against protocol checksum. */
+#define _NETTXF_data_validated (1)
+#define NETTXF_data_validated (1U<<_NETTXF_data_validated)
+
+/* Packet continues in the next request descriptor. */
+#define _NETTXF_more_data (2)
+#define NETTXF_more_data (1U<<_NETTXF_more_data)
+
+/* Packet to be followed by extra descriptor(s). */
+#define _NETTXF_extra_info (3)
+#define NETTXF_extra_info (1U<<_NETTXF_extra_info)
+
+#define XEN_NETIF_MAX_TX_SIZE 0xFFFF
+struct netif_tx_request {
+ grant_ref_t gref;
+ uint16_t offset;
+ uint16_t flags;
+ uint16_t id;
+ uint16_t size;
+};
+typedef struct netif_tx_request netif_tx_request_t;
+
+/* Types of netif_extra_info descriptors. */
+#define XEN_NETIF_EXTRA_TYPE_NONE (0) /* Never used - invalid */
+#define XEN_NETIF_EXTRA_TYPE_GSO (1) /* u.gso */
+#define XEN_NETIF_EXTRA_TYPE_MCAST_ADD (2) /* u.mcast */
+#define XEN_NETIF_EXTRA_TYPE_MCAST_DEL (3) /* u.mcast */
+#define XEN_NETIF_EXTRA_TYPE_HASH (4) /* u.hash */
+#define XEN_NETIF_EXTRA_TYPE_MAX (5)
+
+/* netif_extra_info_t flags. */
+#define _XEN_NETIF_EXTRA_FLAG_MORE (0)
+#define XEN_NETIF_EXTRA_FLAG_MORE (1U<<_XEN_NETIF_EXTRA_FLAG_MORE)
+
+/* GSO types */
+#define XEN_NETIF_GSO_TYPE_NONE (0)
+#define XEN_NETIF_GSO_TYPE_TCPV4 (1)
+#define XEN_NETIF_GSO_TYPE_TCPV6 (2)
+
+/*
+ * This structure needs to fit within both netif_tx_request_t and
+ * netif_rx_response_t for compatibility.
+ */
+struct netif_extra_info {
+ uint8_t type;
+ uint8_t flags;
+ union {
+ struct {
+ uint16_t size;
+ uint8_t type;
+ uint8_t pad;
+ uint16_t features;
+ } gso;
+ struct {
+ uint8_t addr[6];
+ } mcast;
+ struct {
+ uint8_t type;
+ uint8_t algorithm;
+ uint8_t value[4];
+ } hash;
+ uint16_t pad[3];
+ } u;
+};
+typedef struct netif_extra_info netif_extra_info_t;
+
+struct netif_tx_response {
+ uint16_t id;
+ int16_t status;
+};
+typedef struct netif_tx_response netif_tx_response_t;
+
+struct netif_rx_request {
+ uint16_t id; /* Echoed in response message. */
+ uint16_t pad;
+ grant_ref_t gref;
+};
+typedef struct netif_rx_request netif_rx_request_t;
+
+/* Packet data has been validated against protocol checksum. */
+#define _NETRXF_data_validated (0)
+#define NETRXF_data_validated (1U<<_NETRXF_data_validated)
+
+/* Protocol checksum field is blank in the packet (hardware offload)? */
+#define _NETRXF_csum_blank (1)
+#define NETRXF_csum_blank (1U<<_NETRXF_csum_blank)
+
+/* Packet continues in the next request descriptor. */
+#define _NETRXF_more_data (2)
+#define NETRXF_more_data (1U<<_NETRXF_more_data)
+
+/* Packet to be followed by extra descriptor(s). */
+#define _NETRXF_extra_info (3)
+#define NETRXF_extra_info (1U<<_NETRXF_extra_info)
+
+/* Packet has GSO prefix. Deprecated but included for compatibility */
+#define _NETRXF_gso_prefix (4)
+#define NETRXF_gso_prefix (1U<<_NETRXF_gso_prefix)
+
+struct netif_rx_response {
+ uint16_t id;
+ uint16_t offset;
+ uint16_t flags;
+ int16_t status;
+};
+typedef struct netif_rx_response netif_rx_response_t;
+
+/*
+ * Generate netif ring structures and types.
+ */
+
+DEFINE_RING_TYPES(netif_tx, struct netif_tx_request, struct netif_tx_response);
+DEFINE_RING_TYPES(netif_rx, struct netif_rx_request, struct netif_rx_response);
+
+#define NETIF_RSP_DROPPED -2
+#define NETIF_RSP_ERROR -1
+#define NETIF_RSP_OKAY 0
+/* No response: used for auxiliary requests (e.g., netif_extra_info_t). */
+#define NETIF_RSP_NULL 1
+
+#endif
new file mode 100644
@@ -0,0 +1,42 @@
+/******************************************************************************
+ * protocols.h
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to
+ * deal in the Software without restriction, including without limitation the
+ * rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Copyright (c) 2008, Keir Fraser
+ */
+
+#ifndef XEN_PROTOCOLS_H
+#define XEN_PROTOCOLS_H
+
+#define XEN_IO_PROTO_ABI_X86_32 "x86_32-abi"
+#define XEN_IO_PROTO_ABI_X86_64 "x86_64-abi"
+#define XEN_IO_PROTO_ABI_ARM "arm-abi"
+
+#if defined(__i386__)
+# define XEN_IO_PROTO_ABI_NATIVE XEN_IO_PROTO_ABI_X86_32
+#elif defined(__x86_64__)
+# define XEN_IO_PROTO_ABI_NATIVE XEN_IO_PROTO_ABI_X86_64
+#elif defined(__arm__) || defined(__aarch64__)
+# define XEN_IO_PROTO_ABI_NATIVE XEN_IO_PROTO_ABI_ARM
+#else
+# error arch fixup needed here
+#endif
+
+#endif
new file mode 100644
@@ -0,0 +1,70 @@
+/*****************************************************************************
+ * xenbus.h
+ *
+ * Xenbus protocol details.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to
+ * deal in the Software without restriction, including without limitation the
+ * rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Copyright (C) 2005 XenSource Ltd.
+ */
+
+#ifndef XEN_PUBLIC_IO_XENBUS_H
+#define XEN_PUBLIC_IO_XENBUS_H
+
+/*
+ * The state of either end of the Xenbus, i.e. the current communication
+ * status of initialisation across the bus. States here imply nothing about
+ * the state of the connection between the driver and the kernel's device
+ * layers.
+ */
+enum xenbus_state {
+ XenbusStateUnknown = 0,
+
+ XenbusStateInitialising = 1,
+
+ /*
+ * InitWait: Finished early initialisation but waiting for information
+ * from the peer or hotplug scripts.
+ */
+ XenbusStateInitWait = 2,
+
+ /*
+ * Initialised: Waiting for a connection from the peer.
+ */
+ XenbusStateInitialised = 3,
+
+ XenbusStateConnected = 4,
+
+ /*
+ * Closing: The device is being closed due to an error or an unplug event.
+ */
+ XenbusStateClosing = 5,
+
+ XenbusStateClosed = 6,
+
+ /*
+ * Reconfiguring: The device is being reconfigured.
+ */
+ XenbusStateReconfiguring = 7,
+
+ XenbusStateReconfigured = 8
+};
+typedef enum xenbus_state XenbusState;
+
+#endif /* XEN_PUBLIC_IO_XENBUS_H */
@@ -12,7 +12,7 @@
#include <xenctrl.h>
#include <xenstore.h>
-#include <xen/io/xenbus.h>
+#include "hw/xen/interface/io/xenbus.h"
#include "hw/hw.h"
#include "hw/xen/xen.h"