@@ -67,6 +67,25 @@ void show_help(void)
" set-max-cstate <num>|'unlimited' [<num2>|'unlimited']\n"
" set the C-State limitation (<num> >= 0) and\n"
" optionally the C-sub-state limitation (<num2> >= 0)\n"
+ " set-cpufreq-hwp [cpuid] [balance|performance|powersave] <param:val>*\n"
+ " set Hardware P-State (HWP) parameters\n"
+ " optionally a preset of one of\n"
+ " balance|performance|powersave\n"
+ " an optional list of param:val arguments\n"
+ " minimum:N hw_lowest ... hw_highest\n"
+ " maximum:N hw_lowest ... hw_highest\n"
+ " desired:N hw_lowest ... hw_highest\n"
+ " Set explicit performance target.\n"
+ " non-zero disables auto-HWP mode.\n"
+ " energy_perf:0-255 (or 0-15)\n"
+ " energy/performance hint\n"
+ " lower favor performance\n"
+ " higher favor powersave\n"
+ " 127 (or 7) balance\n"
+ " act_window:N{,m,u}s range 0us-1270s\n"
+ " window for internal calculations.\n"
+ " 0 lets the hardware decide.\n"
+ " get-cpufreq-para returns hw_lowest/highest.\n"
" start [seconds] start collect Cx/Px statistics,\n"
" output after CTRL-C or SIGINT or several seconds.\n"
" enable-turbo-mode [cpuid] enable Turbo Mode for processors that support it.\n"
@@ -1309,6 +1328,226 @@ void disable_turbo_mode(int argc, char *argv[])
errno, strerror(errno));
}
+/*
+ * Parse activity_window:NNN{us,ms,s} and validate range.
+ *
+ * Activity window is a 7bit mantissa (0-127) with a 3bit exponent (0-7) base
+ * 10 in microseconds. So the range is 1 microsecond to 1270 seconds. A value
+ * of 0 lets the hardware autonomously select the window.
+ *
+ * Return 0 on success
+ * -1 on error
+ * 1 Not activity_window. i.e. try parsing as another argument
+ */
+static int parse_activity_window(xc_set_hwp_para_t *set_hwp, char *p)
+{
+ char *param = NULL, *val = NULL, *suffix = NULL;
+ unsigned int u;
+ unsigned int exponent = 0;
+ unsigned int multiplier = 1;
+ int ret;
+
+ ret = sscanf(p, "%m[a-z_A-Z]:%ms", ¶m, &val);
+ if ( ret != 2 )
+ {
+ return -1;
+ }
+
+ if ( strncasecmp(param, "act", 3) != 0 )
+ {
+ ret = 1;
+
+ goto out;
+ }
+
+ free(param);
+ param = NULL;
+
+ ret = sscanf(val, "%u%ms", &u, &suffix);
+ if ( ret != 1 && ret != 2 )
+ {
+ fprintf(stderr, "invalid activity window: %s\n", val);
+
+ ret = -1;
+
+ goto out;
+ }
+
+ if ( ret == 2 && suffix )
+ {
+ if ( strcasecmp(suffix, "s") == 0 )
+ {
+ multiplier = 1000 * 1000;
+ exponent = 6;
+ }
+ else if ( strcasecmp(suffix, "ms") == 0 )
+ {
+ multiplier = 1000;
+ exponent = 3;
+ }
+ else if ( strcasecmp(suffix, "us") == 0 )
+ {
+ multiplier = 1;
+ exponent = 0;
+ }
+ else
+ {
+ fprintf(stderr, "invalid activity window units: %s\n", suffix);
+
+ ret = -1;
+ goto out;
+ }
+ }
+
+ if ( u > 1270 * 1000 * 1000 / multiplier )
+ {
+ fprintf(stderr, "activity window %s too large\n", val);
+
+ ret = -1;
+ goto out;
+ }
+
+ /* looking for 7 bits of mantissa and 3 bits of exponent */
+ while ( u > 127 )
+ {
+ u /= 10;
+ exponent += 1;
+ }
+
+ set_hwp->activity_window = ( exponent & 0x7 ) << 7 | ( u & 0x7f );
+ set_hwp->set_params |= XEN_SYSCTL_HWP_SET_ACT_WINDOW;
+
+ ret = 0;
+
+ out:
+ free(suffix);
+ free(param);
+ free(val);
+
+ return ret;
+}
+
+static int parse_hwp_opts(xc_set_hwp_para_t *set_hwp, int *cpuid,
+ int argc, char *argv[])
+{
+ int i = 0;
+
+ if ( argc < 1 )
+ return -1;
+
+ if ( parse_cpuid_non_fatal(argv[i], cpuid) == 0 )
+ {
+ i++;
+ }
+
+ if ( i == argc )
+ return -1;
+
+ if ( strcasecmp(argv[i], "powersave") == 0 )
+ {
+ set_hwp->set_params = XEN_SYSCTL_HWP_SET_PRESET_POWERSAVE;
+ i++;
+ }
+ else if ( strcasecmp(argv[i], "performance") == 0 )
+ {
+ set_hwp->set_params = XEN_SYSCTL_HWP_SET_PRESET_PERFORMANCE;
+ i++;
+ }
+ else if ( strcasecmp(argv[i], "balance") == 0 )
+ {
+ set_hwp->set_params = XEN_SYSCTL_HWP_SET_PRESET_BALANCE;
+ i++;
+ }
+
+ for ( ; i < argc; i++)
+ {
+ unsigned int val;
+ char *param;
+ int ret;
+
+ ret = parse_activity_window(set_hwp, argv[i]);
+ switch ( ret )
+ {
+ case -1:
+ return -1;
+ case 0:
+ continue;
+ break;
+ case 1:
+ /* try other parsing */
+ break;
+ }
+
+ /* sscanf can't handle split on ':' for "%ms:%u' */
+ ret = sscanf(argv[i], "%m[a-zA-Z_]:%u", ¶m, &val);
+ if ( ret != 2 )
+ {
+ fprintf(stderr, "%s is an invalid hwp parameter.\n", argv[i]);
+ return -1;
+ }
+
+ if ( val > 255 )
+ {
+ fprintf(stderr, "%s value %u is out of range.\n", param, val);
+ return -1;
+ }
+
+ if ( strncasecmp(param, "min", 3) == 0 )
+ {
+ set_hwp->minimum = val;
+ set_hwp->set_params |= XEN_SYSCTL_HWP_SET_MINIMUM;
+ }
+ else if ( strncasecmp(param, "max", 3) == 0 )
+ {
+ set_hwp->maximum = val;
+ set_hwp->set_params |= XEN_SYSCTL_HWP_SET_MAXIMUM;
+ }
+ else if ( strncasecmp(param, "des", 3) == 0 )
+ {
+ set_hwp->desired = val;
+ set_hwp->set_params |= XEN_SYSCTL_HWP_SET_DESIRED;
+ }
+ else if ( strncasecmp(param, "ene", 3) == 0 )
+ {
+ set_hwp->energy_perf = val;
+ set_hwp->set_params |= XEN_SYSCTL_HWP_SET_ENERGY_PERF;
+ }
+ else
+ {
+ fprintf(stderr, "%s is an invalid parameter\n.", param);
+ return -1;
+ }
+
+ free(param);
+ }
+
+ return 0;
+}
+
+static void hwp_set_func(int argc, char *argv[])
+{
+ xc_set_hwp_para_t set_hwp = {};
+ int cpuid = -1;
+ int i = 0;
+
+ if ( parse_hwp_opts(&set_hwp, &cpuid, argc, argv) )
+ {
+ fprintf(stderr, "Missing, excess, or invalid argument(s)\n");
+ exit(EINVAL);
+ }
+
+ if ( cpuid != -1 )
+ {
+ i = cpuid;
+ max_cpu_nr = i + 1;
+ }
+
+ for ( ; i < max_cpu_nr; i++ )
+ if ( xc_set_cpufreq_hwp(xc_handle, i, &set_hwp) )
+ fprintf(stderr, "[CPU%d] failed to set hwp params (%d - %s)\n",
+ i, errno, strerror(errno));
+}
+
struct {
const char *name;
void (*function)(int argc, char *argv[]);
@@ -1319,6 +1558,7 @@ struct {
{ "get-cpufreq-average", cpufreq_func },
{ "start", start_gather_func },
{ "get-cpufreq-para", cpufreq_para_func },
+ { "set-cpufreq-hwp", hwp_set_func },
{ "set-scaling-maxfreq", scaling_max_freq_func },
{ "set-scaling-minfreq", scaling_min_freq_func },
{ "set-scaling-governor", scaling_governor_func },
@@ -584,6 +584,7 @@ int set_hwp_para(struct cpufreq_policy *policy,
}
if ( set_hwp->set_params & XEN_SYSCTL_HWP_SET_DESIRED &&
+ set_hwp->desired != 0 &&
( set_hwp->desired < data->hw_lowest ||
set_hwp->desired > data->hw_highest ) )
{
set-cpufreq-hwp allows setting the Hardware P-State (HWP) parameters. It can be run on all or just a snigle cpu. There are preset of balance, powersave & performance. Those can be further tweaked by param:val arguments as explained in the usage description. parameter names are just checked to the first 3 characters to shorten typing. Some options are hardware dependent, and ranges can be found in get-cpufreq-para. Signed-off-by: Jason Andryuk <jandryuk@gmail.com> --- tools/misc/xenpm.c | 240 ++++++++++++++++++++++++++++++++ xen/arch/x86/acpi/cpufreq/hwp.c | 1 + 2 files changed, 241 insertions(+)