diff mbox series

[v2,06/11] vpci/header: Handle p2m range sets per BAR

Message ID 20210923125501.234252-7-andr2000@gmail.com (mailing list archive)
State Superseded
Headers show
Series PCI devices passthrough on Arm, part 3 | expand

Commit Message

Oleksandr Andrushchenko Sept. 23, 2021, 12:54 p.m. UTC
From: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>

Instead of handling a single range set, that contains all the memory
regions of all the BARs and ROM, have them per BAR.

This is in preparation of making non-identity mappings in p2m for the
MMIOs/ROM.

Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
---
 xen/drivers/vpci/header.c | 172 ++++++++++++++++++++++++++------------
 xen/include/xen/vpci.h    |   3 +-
 2 files changed, 122 insertions(+), 53 deletions(-)
diff mbox series

Patch

diff --git a/xen/drivers/vpci/header.c b/xen/drivers/vpci/header.c
index ec4d215f36ff..9c603d26d302 100644
--- a/xen/drivers/vpci/header.c
+++ b/xen/drivers/vpci/header.c
@@ -131,49 +131,75 @@  static void modify_decoding(const struct pci_dev *pdev, uint16_t cmd,
 
 bool vpci_process_pending(struct vcpu *v)
 {
-    if ( v->vpci.mem )
+    if ( v->vpci.num_mem_ranges )
     {
         struct map_data data = {
             .d = v->domain,
             .map = v->vpci.cmd & PCI_COMMAND_MEMORY,
         };
-        int rc = rangeset_consume_ranges(v->vpci.mem, map_range, &data);
+        struct pci_dev *pdev = v->vpci.pdev;
+        struct vpci_header *header = &pdev->vpci->header;
+        unsigned int i;
 
-        if ( rc == -ERESTART )
-            return true;
+        for ( i = 0; i < ARRAY_SIZE(header->bars); i++ )
+        {
+            struct vpci_bar *bar = &header->bars[i];
+            int rc;
 
-        spin_lock(&v->vpci.pdev->vpci->lock);
-        /* Disable memory decoding unconditionally on failure. */
-        modify_decoding(v->vpci.pdev,
-                        rc ? v->vpci.cmd & ~PCI_COMMAND_MEMORY : v->vpci.cmd,
-                        !rc && v->vpci.rom_only);
-        spin_unlock(&v->vpci.pdev->vpci->lock);
+            if ( !bar->mem )
+                continue;
 
-        rangeset_destroy(v->vpci.mem);
-        v->vpci.mem = NULL;
-        if ( rc )
-            /*
-             * FIXME: in case of failure remove the device from the domain.
-             * Note that there might still be leftover mappings. While this is
-             * safe for Dom0, for DomUs the domain will likely need to be
-             * killed in order to avoid leaking stale p2m mappings on
-             * failure.
-             */
-            vpci_remove_device(v->vpci.pdev);
+            rc = rangeset_consume_ranges(bar->mem, map_range, &data);
+
+            if ( rc == -ERESTART )
+                return true;
+
+            spin_lock(&pdev->vpci->lock);
+            /* Disable memory decoding unconditionally on failure. */
+            modify_decoding(pdev,
+                            rc ? v->vpci.cmd & ~PCI_COMMAND_MEMORY : v->vpci.cmd,
+                            !rc && v->vpci.rom_only);
+            spin_unlock(&pdev->vpci->lock);
+
+            rangeset_destroy(bar->mem);
+            bar->mem = NULL;
+            v->vpci.num_mem_ranges--;
+            if ( rc )
+                /*
+                 * FIXME: in case of failure remove the device from the domain.
+                 * Note that there might still be leftover mappings. While this is
+                 * safe for Dom0, for DomUs the domain will likely need to be
+                 * killed in order to avoid leaking stale p2m mappings on
+                 * failure.
+                 */
+                vpci_remove_device(pdev);
+        }
     }
 
     return false;
 }
 
 static int __init apply_map(struct domain *d, const struct pci_dev *pdev,
-                            struct rangeset *mem, uint16_t cmd)
+                            uint16_t cmd)
 {
     struct map_data data = { .d = d, .map = true };
-    int rc;
+    struct vpci_header *header = &pdev->vpci->header;
+    int rc = 0;
+    unsigned int i;
+
+    for ( i = 0; i < ARRAY_SIZE(header->bars); i++ )
+    {
+        struct vpci_bar *bar = &header->bars[i];
 
-    while ( (rc = rangeset_consume_ranges(mem, map_range, &data)) == -ERESTART )
-        process_pending_softirqs();
-    rangeset_destroy(mem);
+        if ( !bar->mem )
+            continue;
+
+        while ( (rc = rangeset_consume_ranges(bar->mem, map_range,
+                                              &data)) == -ERESTART )
+            process_pending_softirqs();
+        rangeset_destroy(bar->mem);
+        bar->mem = NULL;
+    }
     if ( !rc )
         modify_decoding(pdev, cmd, false);
 
@@ -181,7 +207,7 @@  static int __init apply_map(struct domain *d, const struct pci_dev *pdev,
 }
 
 static void defer_map(struct domain *d, struct pci_dev *pdev,
-                      struct rangeset *mem, uint16_t cmd, bool rom_only)
+                      uint16_t cmd, bool rom_only, uint8_t num_mem_ranges)
 {
     struct vcpu *curr = current;
 
@@ -192,9 +218,9 @@  static void defer_map(struct domain *d, struct pci_dev *pdev,
      * started for the same device if the domain is not well-behaved.
      */
     curr->vpci.pdev = pdev;
-    curr->vpci.mem = mem;
     curr->vpci.cmd = cmd;
     curr->vpci.rom_only = rom_only;
+    curr->vpci.num_mem_ranges = num_mem_ranges;
     /*
      * Raise a scheduler softirq in order to prevent the guest from resuming
      * execution with pending mapping operations, to trigger the invocation
@@ -206,42 +232,47 @@  static void defer_map(struct domain *d, struct pci_dev *pdev,
 static int modify_bars(const struct pci_dev *pdev, uint16_t cmd, bool rom_only)
 {
     struct vpci_header *header = &pdev->vpci->header;
-    struct rangeset *mem = rangeset_new(NULL, NULL, 0);
     struct pci_dev *tmp, *dev = NULL;
     const struct vpci_msix *msix = pdev->vpci->msix;
-    unsigned int i;
+    unsigned int i, j;
     int rc;
-
-    if ( !mem )
-        return -ENOMEM;
+    uint8_t num_mem_ranges;
 
     /*
-     * Create a rangeset that represents the current device BARs memory region
+     * Create a rangeset per BAR that represents the current device memory region
      * and compare it against all the currently active BAR memory regions. If
      * an overlap is found, subtract it from the region to be mapped/unmapped.
      *
-     * First fill the rangeset with all the BARs of this device or with the ROM
+     * First fill the rangesets with all the BARs of this device or with the ROM
      * BAR only, depending on whether the guest is toggling the memory decode
      * bit of the command register, or the enable bit of the ROM BAR register.
      */
     for ( i = 0; i < ARRAY_SIZE(header->bars); i++ )
     {
-        const struct vpci_bar *bar = &header->bars[i];
+        struct vpci_bar *bar = &header->bars[i];
         unsigned long start = PFN_DOWN(bar->addr);
         unsigned long end = PFN_DOWN(bar->addr + bar->size - 1);
 
+        bar->mem = NULL;
+
         if ( !MAPPABLE_BAR(bar) ||
              (rom_only ? bar->type != VPCI_BAR_ROM
                        : (bar->type == VPCI_BAR_ROM && !header->rom_enabled)) )
             continue;
 
-        rc = rangeset_add_range(mem, start, end);
+        bar->mem = rangeset_new(NULL, NULL, 0);
+        if ( !bar->mem )
+        {
+            rc = -ENOMEM;
+            goto fail;
+        }
+
+        rc = rangeset_add_range(bar->mem, start, end);
         if ( rc )
         {
             printk(XENLOG_G_WARNING "Failed to add [%lx, %lx]: %d\n",
                    start, end, rc);
-            rangeset_destroy(mem);
-            return rc;
+            goto fail;
         }
     }
 
@@ -252,14 +283,21 @@  static int modify_bars(const struct pci_dev *pdev, uint16_t cmd, bool rom_only)
         unsigned long end = PFN_DOWN(vmsix_table_addr(pdev->vpci, i) +
                                      vmsix_table_size(pdev->vpci, i) - 1);
 
-        rc = rangeset_remove_range(mem, start, end);
-        if ( rc )
+        for ( j = 0; j < ARRAY_SIZE(header->bars); j++ )
         {
-            printk(XENLOG_G_WARNING
-                   "Failed to remove MSIX table [%lx, %lx]: %d\n",
-                   start, end, rc);
-            rangeset_destroy(mem);
-            return rc;
+            const struct vpci_bar *bar = &header->bars[j];
+
+            if ( !bar->mem )
+                continue;
+
+            rc = rangeset_remove_range(bar->mem, start, end);
+            if ( rc )
+            {
+                printk(XENLOG_G_WARNING
+                       "Failed to remove MSIX table [%lx, %lx]: %d\n",
+                       start, end, rc);
+                goto fail;
+            }
         }
     }
 
@@ -291,7 +329,8 @@  static int modify_bars(const struct pci_dev *pdev, uint16_t cmd, bool rom_only)
             unsigned long start = PFN_DOWN(bar->addr);
             unsigned long end = PFN_DOWN(bar->addr + bar->size - 1);
 
-            if ( !bar->enabled || !rangeset_overlaps_range(mem, start, end) ||
+            if ( !bar->enabled ||
+                 !rangeset_overlaps_range(bar->mem, start, end) ||
                  /*
                   * If only the ROM enable bit is toggled check against other
                   * BARs in the same device for overlaps, but not against the
@@ -300,13 +339,12 @@  static int modify_bars(const struct pci_dev *pdev, uint16_t cmd, bool rom_only)
                  (rom_only && tmp == pdev && bar->type == VPCI_BAR_ROM) )
                 continue;
 
-            rc = rangeset_remove_range(mem, start, end);
+            rc = rangeset_remove_range(bar->mem, start, end);
             if ( rc )
             {
                 printk(XENLOG_G_WARNING "Failed to remove [%lx, %lx]: %d\n",
                        start, end, rc);
-                rangeset_destroy(mem);
-                return rc;
+                goto fail;
             }
         }
     }
@@ -324,12 +362,42 @@  static int modify_bars(const struct pci_dev *pdev, uint16_t cmd, bool rom_only)
          * will always be to establish mappings and process all the BARs.
          */
         ASSERT((cmd & PCI_COMMAND_MEMORY) && !rom_only);
-        return apply_map(pdev->domain, pdev, mem, cmd);
+        return apply_map(pdev->domain, pdev, cmd);
     }
 
-    defer_map(dev->domain, dev, mem, cmd, rom_only);
+    /* Find out how many memory ranges has left after MSI and overlaps. */
+    num_mem_ranges = 0;
+    for ( i = 0; i < ARRAY_SIZE(header->bars); i++ )
+    {
+        struct vpci_bar *bar = &header->bars[i];
+
+        if ( !rangeset_is_empty(bar->mem) )
+            num_mem_ranges++;
+    }
+
+    /*
+     * There are cases when PCI device, root port for example, has neither
+     * memory space nor IO. In this case PCI command register write is
+     * missed resulting in the underlying PCI device not functional, so:
+     *   - if there are no regions write the command register now
+     *   - if there are regions then defer work and write later on
+     */
+    if ( !num_mem_ranges )
+        pci_conf_write16(pdev->sbdf, PCI_COMMAND, cmd);
+    else
+        defer_map(dev->domain, dev, cmd, rom_only, num_mem_ranges);
 
     return 0;
+
+fail:
+    for ( i = 0; i < ARRAY_SIZE(header->bars); i++ )
+    {
+        struct vpci_bar *bar = &header->bars[i];
+
+        rangeset_destroy(bar->mem);
+        bar->mem = NULL;
+    }
+    return rc;
 }
 
 static void cmd_write(const struct pci_dev *pdev, unsigned int reg,
diff --git a/xen/include/xen/vpci.h b/xen/include/xen/vpci.h
index 9eaf99f356fe..3696c73a4237 100644
--- a/xen/include/xen/vpci.h
+++ b/xen/include/xen/vpci.h
@@ -86,6 +86,7 @@  struct vpci {
             /* Guest view of the BAR. */
             uint64_t guest_addr;
             uint64_t size;
+            struct rangeset *mem;
             enum {
                 VPCI_BAR_EMPTY,
                 VPCI_BAR_IO,
@@ -160,9 +161,9 @@  struct vpci {
 
 struct vpci_vcpu {
     /* Per-vcpu structure to store state while {un}mapping of PCI BARs. */
-    struct rangeset *mem;
     struct pci_dev *pdev;
     uint16_t cmd;
+    uint8_t num_mem_ranges;
     bool rom_only : 1;
 };