@@ -40,6 +40,7 @@ ARCH=$(XEN_TARGET_ARCH)
SRCARCH=$(shell echo $(ARCH) | \
sed -e 's/x86.*/x86/' -e s'/arm\(32\|64\)/arm/g' \
-e s'/riscv.*/riscv/g')
+export ARCH SRCARCH
# Don't break if the build process wasn't called from the top level
# we need XEN_TARGET_ARCH to generate the proper config
@@ -163,6 +164,13 @@ ifneq ($(filter %config,$(MAKECMDGOALS)),)
config-build := y
endif
+export CONFIG_SHELL := $(SHELL)
+export YACC = $(if $(BISON),$(BISON),bison)
+export LEX = $(if $(FLEX),$(FLEX),flex)
+
+# Default file for 'make defconfig'.
+export KBUILD_DEFCONFIG := $(ARCH)_defconfig
+
# CLANG_FLAGS needs to be calculated before calling Kconfig
ifneq ($(shell $(CC) --version 2>&1 | head -n 1 | grep clang),)
CLANG_FLAGS :=
@@ -203,9 +211,6 @@ PHONY += tools_fixdep
tools_fixdep:
$(MAKE) -C tools fixdep
-# Shorthand for kconfig
-kconfig = -f $(BASEDIR)/tools/kconfig/Makefile.kconfig ARCH=$(ARCH) SRCARCH=$(SRCARCH) HOSTCC="$(HOSTCC)" HOSTCXX="$(HOSTCXX)"
-
ifeq ($(config-build),y)
# ===========================================================================
# *config targets only - make sure prerequisites are updated, and descend
@@ -221,14 +226,14 @@ filechk_kconfig_allconfig = \
.allconfig.tmp: FORCE
set -e; { $(call filechk_kconfig_allconfig); } > $@
-config: FORCE
- $(MAKE) $(kconfig) $@
+config: tools_fixdep FORCE
+ $(Q)$(MAKE) $(build)=tools/kconfig $@
# Config.mk tries to include .config file, don't try to remake it
%/.config: ;
-%config: .allconfig.tmp FORCE
- $(MAKE) $(kconfig) KCONFIG_ALLCONFIG=$< $@
+%config: .allconfig.tmp tools_fixdep FORCE
+ $(Q)$(MAKE) $(build)=tools/kconfig KCONFIG_ALLCONFIG=$< $@
else # !config-build
@@ -238,9 +243,15 @@ ifeq ($(need-config),y)
# changes are detected.
-include include/config/auto.conf.cmd
+# This allows make to build fixdep before invoking defconfig. We can't use
+# "tools_fixdep" which is a .PHONY target and would force make to call
+# "defconfig" again to update $(KCONFIG_CONFIG).
+tools/fixdep:
+ $(MAKE) -C tools fixdep
+
# Allow people to just run `make` as before and not force them to configure
-$(KCONFIG_CONFIG):
- $(MAKE) $(kconfig) defconfig
+$(KCONFIG_CONFIG): tools/fixdep
+ $(Q)$(MAKE) $(build)=tools/kconfig defconfig
# The actual configuration files used during the build are stored in
# include/generated/ and include/config/. Update them if .config is newer than
@@ -249,7 +260,7 @@ $(KCONFIG_CONFIG):
# This exploits the 'multi-target pattern rule' trick.
# The syncconfig should be executed only once to make all the targets.
include/config/%.conf include/config/%.conf.cmd: $(KCONFIG_CONFIG)
- $(MAKE) $(kconfig) syncconfig
+ $(Q)$(MAKE) $(build)=tools/kconfig syncconfig
ifeq ($(CONFIG_DEBUG),y)
CFLAGS += -O1
@@ -406,9 +417,10 @@ _clean:
$(MAKE) $(clean) arch/riscv
$(MAKE) $(clean) arch/x86
$(MAKE) $(clean) test
- $(MAKE) $(kconfig) clean
+ $(MAKE) $(clean) tools/kconfig
find . \( -name "*.o" -o -name ".*.d" -o -name ".*.d2" \
-o -name ".*.o.tmp" -o -name "*~" -o -name "core" \
+ -o -name '*.lex.c' -o -name '*.tab.[ch]' \
-o -name "*.gcno" -o -name ".*.cmd" -o -name "lib.a" \) -exec rm -f {} \;
rm -f include/asm $(TARGET) $(TARGET).gz $(TARGET).efi $(TARGET).efi.map $(TARGET)-syms $(TARGET)-syms.map *~ core
rm -f asm-offsets.s arch/*/include/asm/asm-offsets.h
@@ -89,6 +89,13 @@ subdir-y := $(addprefix $(obj)/,$(subdir-y))
nocov-y := $(addprefix $(obj)/,$(nocov-y))
noubsan-y := $(addprefix $(obj)/,$(noubsan-y))
+# Do not include hostprogs rules unless needed.
+# $(sort ...) is used here to remove duplicated words and excessive spaces.
+hostprogs-y := $(sort $(hostprogs-y))
+ifneq ($(hostprogs-y),)
+include scripts/Makefile.host
+endif
+
# subdir-builtin may contain duplications. Use $(sort ...)
subdir-builtin := $(sort $(filter %/built_in.o, $(obj-y)))
@@ -267,7 +274,11 @@ intermediate_targets = $(foreach sfx, $(2), \
$(patsubst %$(strip $(1)),%$(sfx), \
$(filter %$(strip $(1)), $(targets))))
# %.init.o <- %.o
-targets += $(call intermediate_targets, .init.o, .o)
+# %.lex.o <- %.lex.c <- %.l
+# %.tab.o <- %.tab.[ch] <- %.y
+targets += $(call intermediate_targets, .init.o, .o) \
+ $(call intermediate_targets, .lex.o, .lex.c) \
+ $(call intermediate_targets, .tab.o, .tab.c .tab.h)
# Build
# ---------------------------------------------------------------------------
@@ -25,6 +25,37 @@ real-prereqs = $(filter-out $(PHONY), $^)
# Escape single quote for use in echo statements
escsq = $(subst $(squote),'\$(squote)',$1)
+###
+# Easy method for doing a status message
+ kecho := :
+ quiet_kecho := echo
+silent_kecho := :
+kecho := $($(quiet)kecho)
+
+###
+# filechk is used to check if the content of a generated file is updated.
+# Sample usage:
+#
+# filechk_sample = echo $(KERNELRELEASE)
+# version.h: FORCE
+# $(call filechk,sample)
+#
+# The rule defined shall write to stdout the content of the new file.
+# The existing file will be compared with the new one.
+# - If no file exist it is created
+# - If the content differ the new file is used
+# - If they are equal no change, and no timestamp update
+define filechk
+ $(Q)set -e; \
+ mkdir -p $(dir $@); \
+ trap "rm -f $(dot-target).tmp" EXIT; \
+ { $(filechk_$(1)); } > $(dot-target).tmp; \
+ if [ ! -r $@ ] || ! cmp -s $@ $(dot-target).tmp; then \
+ $(kecho) ' UPD $@'; \
+ mv -f $(dot-target).tmp $@; \
+ fi
+endef
+
# as-insn: Check whether assembler supports an instruction.
# Usage: cflags-y += $(call as-insn,CC FLAGS,"insn",option-yes,option-no)
as-insn = $(if $(shell echo 'void _(void) { asm volatile ( $(2) ); }' \
@@ -17,8 +17,17 @@ include $(src)/Makefile
subdir-all := $(subdir-y) $(subdir-n) $(subdir-) \
$(patsubst %/,%, $(filter %/, $(obj-y) $(obj-n) $(obj-)))
+__clean-files := \
+ $(clean-files) $(hostprogs-y) $(hostprogs-)
+
+__clean-files := $(wildcard $(__clean-files))
+
.PHONY: clean
-clean:: $(subdir-all) ;
+clean:: $(subdir-all)
+ifneq ($(strip $(__clean-files)),)
+ rm -rf $(__clean-files)
+endif
+ @:
# Descending
# ---------------------------------------------------------------------------
similarity index 95%
rename from xen/tools/kconfig/Makefile.host
rename to xen/scripts/Makefile.host
@@ -1,5 +1,8 @@
# SPDX-License-Identifier: GPL-2.0
+# target with $(obj)/ and its suffix stripped
+target-stem = $(basename $(patsubst $(obj)/%,%,$@))
+
# LEX
# ---------------------------------------------------------------------------
quiet_cmd_flex = LEX $@
@@ -114,7 +117,7 @@ quiet_cmd_host-cmulti = HOSTLD $@
$(KBUILD_HOSTLDLIBS) $(HOSTLDLIBS_$(target-stem))
$(host-cmulti): FORCE
$(call if_changed,host-cmulti)
-$(call multi_depend, $(host-cmulti), , -objs)
+$(call multi-depend, $(host-cmulti), , -objs)
# Create .o file from a single .c file
# host-cobjs -> .o
@@ -132,7 +135,7 @@ quiet_cmd_host-cxxmulti = HOSTLD $@
$(KBUILD_HOSTLDLIBS) $(HOSTLDLIBS_$(target-stem))
$(host-cxxmulti): FORCE
$(call if_changed,host-cxxmulti)
-$(call multi_depend, $(host-cxxmulti), , -objs -cxxobjs)
+$(call multi-depend, $(host-cxxmulti), , -objs -cxxobjs)
# Create .o file from a single .cc (C++) file
quiet_cmd_host-cxxobjs = HOSTCXX $@
@@ -165,7 +168,7 @@ quiet_cmd_host-cshlib = HOSTLLD -shared $@
$(KBUILD_HOSTLDLIBS) $(HOSTLDLIBS_$(target-stem).so)
$(host-cshlib): FORCE
$(call if_changed,host-cshlib)
-$(call multi_depend, $(host-cshlib), .so, -objs)
+$(call multi-depend, $(host-cshlib), .so, -objs)
# Link a shared library, based on position independent .o files
# *.o -> .so shared library (host-cxxshlib)
@@ -175,7 +178,7 @@ quiet_cmd_host-cxxshlib = HOSTLLD -shared $@
$(KBUILD_HOSTLDLIBS) $(HOSTLDLIBS_$(target-stem).so)
$(host-cxxshlib): FORCE
$(call if_changed,host-cxxshlib)
-$(call multi_depend, $(host-cxxshlib), .so, -objs)
+$(call multi-depend, $(host-cxxshlib), .so, -objs)
targets += $(host-csingle) $(host-cmulti) $(host-cobjs)\
$(host-cxxmulti) $(host-cxxobjs) $(host-cshlib) $(host-cshobjs) $(host-cxxshlib) $(host-cxxshobjs)
@@ -91,6 +91,9 @@ endif
configfiles=$(wildcard $(srctree)/kernel/configs/$@ $(srctree)/arch/$(SRCARCH)/configs/$@)
+# Don't try to remake this file included by Config.mk.
+$(XEN_ROOT)/.config: ;
+
%.config: $(obj)/conf
$(if $(call configfiles),, $(error No configuration exists for this target on this architecture))
$(Q)$(CONFIG_SHELL) $(srctree)/tools/kconfig/merge_config.sh -m .config $(configfiles)
deleted file mode 100644
@@ -1,106 +0,0 @@
-# xen/tools/kconfig
-
-# default rule to do nothing
-all:
-
-# Xen doesn't have a silent build flag
-quiet :=
-Q :=
-kecho := :
-
-# eventually you'll want to do out of tree builds
-srctree := $(BASEDIR)
-objtree := $(srctree)
-src := tools/kconfig
-obj := $(src)
-
-# handle functions (most of these lifted from different Linux makefiles
-dot-target = $(dir $@).$(notdir $@)
-depfile = $(subst $(comma),,$(dot-target).d)
-basetarget = $(basename $(notdir $@))
-# target with $(obj)/ and its suffix stripped
-target-stem = $(basename $(patsubst $(obj)/%,%,$@))
-cmd = $(cmd_$(1))
-if_changed = $(cmd_$(1))
-if_changed_dep = $(cmd_$(1))
-
-###
-# filechk is used to check if the content of a generated file is updated.
-# Sample usage:
-#
-# filechk_sample = echo $(KERNELRELEASE)
-# version.h: FORCE
-# $(call filechk,sample)
-#
-# The rule defined shall write to stdout the content of the new file.
-# The existing file will be compared with the new one.
-# - If no file exist it is created
-# - If the content differ the new file is used
-# - If they are equal no change, and no timestamp update
-# - stdin is piped in from the first prerequisite ($<) so one has
-# to specify a valid file as first prerequisite (often the kbuild file)
-define filechk
- $(Q)set -e; \
- mkdir -p $(dir $@); \
- { $(filechk_$(1)); } > $@.tmp; \
- if [ -r $@ ] && cmp -s $@ $@.tmp; then \
- rm -f $@.tmp; \
- else \
- $(kecho) ' UPD $@'; \
- mv -f $@.tmp $@; \
- fi
-endef
-
-define multi_depend
-$(foreach m, $(notdir $1), \
- $(eval $(obj)/$m: \
- $(addprefix $(obj)/, $(foreach s, $3, $($(m:%$(strip $2)=%$(s)))))))
-endef
-
-# Set our default defconfig file
-KBUILD_DEFCONFIG := $(ARCH)_defconfig
-
-# provide our shell
-CONFIG_SHELL := $(SHELL)
-
-# provide the host compiler
-HOSTCC ?= gcc
-HOSTCXX ?= g++
-YACC = $(if $(BISON),$(BISON),bison)
-LEX = $(if $(FLEX),$(FLEX),flex)
-
-# force target
-PHONY += FORCE
-
-FORCE:
-
-# include the original Makefile and Makefile.host from Linux
-include $(src)/Makefile
-include $(src)/Makefile.host
-
-# Add intermediate targets:
-# When building objects with specific suffix patterns, add intermediate
-# targets that the final targets are derived from.
-intermediate_targets = $(foreach sfx, $(2), \
- $(patsubst %$(strip $(1)),%$(sfx), \
- $(filter %$(strip $(1)), $(targets))))
-
-# %.lex.o <- %.lex.c <- %.l
-# %.tab.o <- %.tab.[ch] <- %.y
-targets += $(call intermediate_targets, .lex.o, .lex.c) \
- $(call intermediate_targets, .tab.o, .tab.c .tab.h)
-
-# clean up rule
-clean-deps = $(foreach f,$(host-cobjs) $(host-cxxobjs),$(dir $f).$(notdir $f).d)
-clean-shipped = $(patsubst %_shipped,%,$(wildcard $(obj)/*_shipped))
-
-clean:
- rm -rf $(clean-files)
- rm -rf $(clean-deps)
- rm -rf $(host-csingle) $(host-cmulti) $(host-cxxmulti) $(host-cobjs) $(host-cxxobjs)
- rm -rf $(clean-shipped)
-
-$(obj)/zconf%: $(src)/zconf%_shipped
- cp -f $< $@
-
-.PHONY: $(PHONY)
Now that xen's build system is very close to Linux's ones, we can hook "Makefile.host" into Xen's build system, and we can build Kconfig with that. "tools/kconfig/Makefile" now needs a workaround to not rebuild "$(XEN_ROOT)/.config", as `make` tries the rules "%.config" which fails with: tools/kconfig/Makefile:95: *** No configuration exists for this target on this architecture. Stop. Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> --- Notes: v8: - reviewed - adjust Makefile.host to use the renamed macro "multi-depend". - move .config empty rules workaround into kconfig/Makefile (from Rules.mk) and merge the change of patch build: add an other explicite rules to not build $(XEN_ROOT)/.config into build: hook kconfig into xen build system xen/Makefile | 34 ++++-- xen/Rules.mk | 13 ++- xen/scripts/Kbuild.include | 31 ++++++ xen/scripts/Makefile.clean | 11 +- xen/{tools/kconfig => scripts}/Makefile.host | 11 +- xen/tools/kconfig/Makefile | 3 + xen/tools/kconfig/Makefile.kconfig | 106 ------------------- 7 files changed, 86 insertions(+), 123 deletions(-) rename xen/{tools/kconfig => scripts}/Makefile.host (95%) delete mode 100644 xen/tools/kconfig/Makefile.kconfig