@@ -39,6 +39,7 @@
#include <linux/platform_device.h>
#include <linux/pm_domain.h>
#include <linux/pm_opp.h>
+#include <linux/power_supply.h>
#include <linux/reboot.h>
#include <linux/regmap.h>
#include <linux/reset.h>
@@ -108,6 +109,7 @@
#define PMC_USB_DEBOUNCE_DEL 0xec
#define PMC_USB_AO 0xf0
+#define PMC_SCRATCH37 0x130
#define PMC_SCRATCH41 0x140
#define PMC_WAKE2_MASK 0x160
@@ -1101,8 +1103,7 @@ static struct notifier_block tegra_pmc_reboot_notifier = {
.notifier_call = tegra_pmc_reboot_notify,
};
-static int tegra_pmc_restart_notify(struct notifier_block *this,
- unsigned long action, void *data)
+static void tegra_pmc_restart(void)
{
u32 value;
@@ -1110,14 +1111,31 @@ static int tegra_pmc_restart_notify(struct notifier_block *this,
value = tegra_pmc_readl(pmc, PMC_CNTRL);
value |= PMC_CNTRL_MAIN_RST;
tegra_pmc_writel(pmc, value, PMC_CNTRL);
+}
+
+static int tegra_pmc_restart_handler(struct sys_off_data *data)
+{
+ tegra_pmc_restart();
return NOTIFY_DONE;
}
-static struct notifier_block tegra_pmc_restart_handler = {
- .notifier_call = tegra_pmc_restart_notify,
- .priority = 128,
-};
+static int tegra_pmc_power_off_handler(struct sys_off_data *data)
+{
+ /*
+ * Reboot Nexus 7 into special bootloader mode if USB cable is
+ * connected in order to display battery status and power off.
+ */
+ if (of_machine_is_compatible("asus,grouper") &&
+ power_supply_is_system_supplied()) {
+ const u32 go_to_charger_mode = 0xa5a55a5a;
+
+ tegra_pmc_writel(pmc, go_to_charger_mode, PMC_SCRATCH37);
+ tegra_pmc_restart();
+ }
+
+ return NOTIFY_DONE;
+}
static int powergate_show(struct seq_file *s, void *data)
{
@@ -2879,6 +2897,42 @@ static int tegra_pmc_probe(struct platform_device *pdev)
pmc->clk = NULL;
}
+ /*
+ * PMC should be last resort for restarting since it soft-resets
+ * CPU without resetting everything else.
+ */
+ err = devm_register_reboot_notifier(&pdev->dev,
+ &tegra_pmc_reboot_notifier);
+ if (err) {
+ dev_err(&pdev->dev, "unable to register reboot notifier, %d\n",
+ err);
+ return err;
+ }
+
+ err = devm_register_sys_off_handler(&pdev->dev,
+ SYS_OFF_MODE_RESTART,
+ SYS_OFF_PRIO_LOW,
+ tegra_pmc_restart_handler, NULL);
+ if (err) {
+ dev_err(&pdev->dev, "failed to register sys-off handler: %d\n",
+ err);
+ return err;
+ }
+
+ /*
+ * PMC should be primary power-off method if it soft-resets CPU,
+ * asking bootloader to shutdown hardware.
+ */
+ err = devm_register_sys_off_handler(&pdev->dev,
+ SYS_OFF_MODE_POWER_OFF,
+ SYS_OFF_PRIO_FIRMWARE,
+ tegra_pmc_power_off_handler, NULL);
+ if (err) {
+ dev_err(&pdev->dev, "failed to register sys-off handler: %d\n",
+ err);
+ return err;
+ }
+
/*
* PCLK clock rate can't be retrieved using CLK API because it
* causes lockup if CPU enters LP2 idle state from some other
@@ -2910,28 +2964,13 @@ static int tegra_pmc_probe(struct platform_device *pdev)
goto cleanup_sysfs;
}
- err = devm_register_reboot_notifier(&pdev->dev,
- &tegra_pmc_reboot_notifier);
- if (err) {
- dev_err(&pdev->dev, "unable to register reboot notifier, %d\n",
- err);
- goto cleanup_debugfs;
- }
-
- err = register_restart_handler(&tegra_pmc_restart_handler);
- if (err) {
- dev_err(&pdev->dev, "unable to register restart handler, %d\n",
- err);
- goto cleanup_debugfs;
- }
-
err = tegra_pmc_pinctrl_init(pmc);
if (err)
- goto cleanup_restart_handler;
+ goto cleanup_debugfs;
err = tegra_pmc_regmap_init(pmc);
if (err < 0)
- goto cleanup_restart_handler;
+ goto cleanup_debugfs;
err = tegra_powergate_init(pmc, pdev->dev.of_node);
if (err < 0)
@@ -2954,8 +2993,6 @@ static int tegra_pmc_probe(struct platform_device *pdev)
cleanup_powergates:
tegra_powergate_remove_all(pdev->dev.of_node);
-cleanup_restart_handler:
- unregister_restart_handler(&tegra_pmc_restart_handler);
cleanup_debugfs:
debugfs_remove(pmc->debugfs);
cleanup_sysfs:
Nexus 7 Android tablet can be turned off using a special bootloader command which is conveyed to bootloader by putting magic value into the special scratch register and then rebooting normally. This power-off method should be invoked if USB cable is connected. Bootloader then will display battery status and power off the device. This behaviour is borrowed from downstream kernel and matches user expectations, otherwise it looks like device got hung during power-off and it may wake up on USB disconnect. Switch PMC driver to sys-off handler API, which provides drivers with chained power-off callbacks functionality that is required for powering-off devices properly. It also brings resource-managed API for the restart handler registration that makes PMC driver code cleaner. Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> --- drivers/soc/tegra/pmc.c | 87 +++++++++++++++++++++++++++++------------ 1 file changed, 62 insertions(+), 25 deletions(-)