@@ -499,14 +499,12 @@ static MemoryRegion *make_eth_dev(MPS2TZMachineState *mms, void *opaque,
const PPCExtraData *extradata)
{
SysBusDevice *s;
- NICInfo *nd = &nd_table[0];
/* In hardware this is a LAN9220; the LAN9118 is software compatible
* except that it doesn't support the checksum-offload feature.
*/
- qemu_check_nic_model(nd, "lan9118");
mms->lan9118 = qdev_new(TYPE_LAN9118);
- qdev_set_nic_properties(mms->lan9118, nd);
+ qemu_configure_nic_device(mms->lan9118, true, NULL);
s = SYS_BUS_DEVICE(mms->lan9118);
sysbus_realize_and_unref(s, &error_fatal);
@@ -524,7 +522,6 @@ static MemoryRegion *make_eth_usb(MPS2TZMachineState *mms, void *opaque,
* irqs[] is the ethernet IRQ.
*/
SysBusDevice *s;
- NICInfo *nd = &nd_table[0];
memory_region_init(&mms->eth_usb_container, OBJECT(mms),
"mps2-tz-eth-usb-container", 0x200000);
@@ -533,9 +530,8 @@ static MemoryRegion *make_eth_usb(MPS2TZMachineState *mms, void *opaque,
* In hardware this is a LAN9220; the LAN9118 is software compatible
* except that it doesn't support the checksum-offload feature.
*/
- qemu_check_nic_model(nd, "lan9118");
mms->lan9118 = qdev_new(TYPE_LAN9118);
- qdev_set_nic_properties(mms->lan9118, nd);
+ qemu_configure_nic_device(mms->lan9118, true, NULL);
s = SYS_BUS_DEVICE(mms->lan9118);
sysbus_realize_and_unref(s, &error_fatal);
@@ -197,12 +197,8 @@ static void m2sxxx_soc_realize(DeviceState *dev_soc, Error **errp)
g_free(bus_name);
}
- /* FIXME use qdev NIC properties instead of nd_table[] */
- if (nd_table[0].used) {
- qemu_check_nic_model(&nd_table[0], TYPE_MSS_EMAC);
- qdev_set_nic_properties(DEVICE(&s->emac), &nd_table[0]);
- }
dev = DEVICE(&s->emac);
+ qemu_configure_nic_device(dev, true, NULL);
object_property_set_link(OBJECT(&s->emac), "ahb-bus",
OBJECT(get_system_memory()), &error_abort);
if (!sysbus_realize(SYS_BUS_DEVICE(&s->emac), errp)) {
@@ -1286,9 +1286,8 @@ static void musicpal_init(MachineState *machine)
}
sysbus_create_simple(TYPE_MV88W8618_FLASHCFG, MP_FLASHCFG_BASE, NULL);
- qemu_check_nic_model(&nd_table[0], "mv88w8618");
dev = qdev_new(TYPE_MV88W8618_ETH);
- qdev_set_nic_properties(dev, &nd_table[0]);
+ qemu_configure_nic_device(dev, true, "mv88w8618");
object_property_set_link(OBJECT(dev), "dma-memory",
OBJECT(get_system_memory()), &error_fatal);
sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
@@ -108,16 +108,13 @@ static void zynq_write_board_setup(ARMCPU *cpu,
static struct arm_boot_info zynq_binfo = {};
-static void gem_init(NICInfo *nd, uint32_t base, qemu_irq irq)
+static void gem_init(uint32_t base, qemu_irq irq)
{
DeviceState *dev;
SysBusDevice *s;
dev = qdev_new(TYPE_CADENCE_GEM);
- if (nd->used) {
- qemu_check_nic_model(nd, TYPE_CADENCE_GEM);
- qdev_set_nic_properties(dev, nd);
- }
+ qemu_configure_nic_device(dev, true, NULL);
object_property_set_int(OBJECT(dev), "phy-addr", 7, &error_abort);
s = SYS_BUS_DEVICE(dev);
sysbus_realize_and_unref(s, &error_fatal);
@@ -279,8 +276,8 @@ static void zynq_init(MachineState *machine)
sysbus_create_varargs("cadence_ttc", 0xF8002000,
pic[69-IRQ_OFFSET], pic[70-IRQ_OFFSET], pic[71-IRQ_OFFSET], NULL);
- gem_init(&nd_table[0], 0xE000B000, pic[54-IRQ_OFFSET]);
- gem_init(&nd_table[1], 0xE000C000, pic[77-IRQ_OFFSET]);
+ gem_init(0xE000B000, pic[54-IRQ_OFFSET]);
+ gem_init(0xE000C000, pic[77-IRQ_OFFSET]);
for (n = 0; n < 2; n++) {
int hci_irq = n ? 79 : 56;
@@ -249,18 +249,13 @@ static void versal_create_gems(Versal *s, qemu_irq *pic)
static const int irqs[] = { VERSAL_GEM0_IRQ_0, VERSAL_GEM1_IRQ_0};
static const uint64_t addrs[] = { MM_GEM0, MM_GEM1 };
char *name = g_strdup_printf("gem%d", i);
- NICInfo *nd = &nd_table[i];
DeviceState *dev;
MemoryRegion *mr;
object_initialize_child(OBJECT(s), name, &s->lpd.iou.gem[i],
TYPE_CADENCE_GEM);
dev = DEVICE(&s->lpd.iou.gem[i]);
- /* FIXME use qdev NIC properties instead of nd_table[] */
- if (nd->used) {
- qemu_check_nic_model(nd, "cadence_gem");
- qdev_set_nic_properties(dev, nd);
- }
+ qemu_configure_nic_device(dev, true, NULL);
object_property_set_int(OBJECT(dev), "phy-addr", 23, &error_abort);
object_property_set_int(OBJECT(dev), "num-priority-queues", 2,
&error_abort);
@@ -616,13 +616,7 @@ static void xlnx_zynqmp_realize(DeviceState *dev, Error **errp)
}
for (i = 0; i < XLNX_ZYNQMP_NUM_GEMS; i++) {
- NICInfo *nd = &nd_table[i];
-
- /* FIXME use qdev NIC properties instead of nd_table[] */
- if (nd->used) {
- qemu_check_nic_model(nd, TYPE_CADENCE_GEM);
- qdev_set_nic_properties(DEVICE(&s->gem[i]), nd);
- }
+ qemu_configure_nic_device(DEVICE(&s->gem[i]), true, NULL);
object_property_set_int(OBJECT(&s->gem[i]), "revision", GEM_REVISION,
&error_abort);
object_property_set_int(OBJECT(&s->gem[i]), "phy-addr", 23,