@@ -9,6 +9,7 @@
#include <asm/fixmap.h>
#include <asm/static-memory.h>
#include <asm/static-shmem.h>
+#include <asm/setup.h>
static unsigned long opt_xenheap_megabytes __initdata;
integer_param("xenheap_megabytes", opt_xenheap_megabytes);
@@ -31,100 +32,6 @@ static void __init setup_directmap_mappings(unsigned long base_mfn,
directmap_virt_end = XENHEAP_VIRT_START + nr_mfns * PAGE_SIZE;
}
-/*
- * Returns the end address of the highest region in the range s..e
- * with required size and alignment that does not conflict with the
- * modules from first_mod to nr_modules.
- *
- * For non-recursive callers first_mod should normally be 0 (all
- * modules and Xen itself) or 1 (all modules but not Xen).
- */
-static paddr_t __init consider_modules(paddr_t s, paddr_t e,
- uint32_t size, paddr_t align,
- int first_mod)
-{
- const struct membanks *reserved_mem = bootinfo_get_reserved_mem();
-#ifdef CONFIG_STATIC_SHM
- const struct membanks *shmem = bootinfo_get_shmem();
-#endif
- const struct bootmodules *mi = &bootinfo.modules;
- int i;
- int nr;
-
- s = (s+align-1) & ~(align-1);
- e = e & ~(align-1);
-
- if ( s > e || e - s < size )
- return 0;
-
- /* First check the boot modules */
- for ( i = first_mod; i < mi->nr_mods; i++ )
- {
- paddr_t mod_s = mi->module[i].start;
- paddr_t mod_e = mod_s + mi->module[i].size;
-
- if ( s < mod_e && mod_s < e )
- {
- mod_e = consider_modules(mod_e, e, size, align, i+1);
- if ( mod_e )
- return mod_e;
-
- return consider_modules(s, mod_s, size, align, i+1);
- }
- }
-
- /*
- * i is the current bootmodule we are evaluating, across all
- * possible kinds of bootmodules.
- *
- * When retrieving the corresponding reserved-memory addresses, we
- * need to index the reserved_mem bank starting from 0, and only counting
- * the reserved-memory modules. Hence, we need to use i - nr.
- */
- nr = mi->nr_mods;
- for ( ; i - nr < reserved_mem->nr_banks; i++ )
- {
- paddr_t r_s = reserved_mem->bank[i - nr].start;
- paddr_t r_e = r_s + reserved_mem->bank[i - nr].size;
-
- if ( s < r_e && r_s < e )
- {
- r_e = consider_modules(r_e, e, size, align, i + 1);
- if ( r_e )
- return r_e;
-
- return consider_modules(s, r_s, size, align, i + 1);
- }
- }
-
-#ifdef CONFIG_STATIC_SHM
- nr += reserved_mem->nr_banks;
- for ( ; i - nr < shmem->nr_banks; i++ )
- {
- paddr_t r_s, r_e;
-
- r_s = shmem->bank[i - nr].start;
-
- /* Shared memory banks can contain INVALID_PADDR as start */
- if ( INVALID_PADDR == r_s )
- continue;
-
- r_e = r_s + shmem->bank[i - nr].size;
-
- if ( s < r_e && r_s < e )
- {
- r_e = consider_modules(r_e, e, size, align, i + 1);
- if ( r_e )
- return r_e;
-
- return consider_modules(s, r_s, size, align, i + 1);
- }
- }
-#endif
-
- return e;
-}
-
/*
* Find a contiguous region that fits in the static heap region with
* required size and alignment, and return the end address of the region
@@ -89,6 +89,9 @@ struct init_info
unsigned int cpuid;
};
+paddr_t consider_modules(paddr_t s, paddr_t e, uint32_t size, paddr_t align,
+ int first_mod);
+
#endif
/*
* Local variables:
@@ -6,7 +6,10 @@
*/
#include <xen/init.h>
+#include <xen/lib.h>
#include <xen/libfdt/libfdt.h>
+#include <xen/libfdt/libfdt-xen.h>
+#include <xen/llc-coloring.h>
#include <xen/sections.h>
#include <xen/sizes.h>
#include <xen/vmap.h>
@@ -222,6 +225,100 @@ static void xen_pt_enforce_wnx(void)
flush_xen_tlb_local();
}
+/*
+ * Returns the end address of the highest region in the range s..e
+ * with required size and alignment that does not conflict with the
+ * modules from first_mod to nr_modules.
+ *
+ * For non-recursive callers first_mod should normally be 0 (all
+ * modules and Xen itself) or 1 (all modules but not Xen).
+ */
+paddr_t __init consider_modules(paddr_t s, paddr_t e,
+ uint32_t size, paddr_t align,
+ int first_mod)
+{
+ const struct membanks *reserved_mem = bootinfo_get_reserved_mem();
+#ifdef CONFIG_STATIC_SHM
+ const struct membanks *shmem = bootinfo_get_shmem();
+#endif
+ const struct bootmodules *mi = &bootinfo.modules;
+ int i;
+ int nr;
+
+ s = (s+align-1) & ~(align-1);
+ e = e & ~(align-1);
+
+ if ( s > e || e - s < size )
+ return 0;
+
+ /* First check the boot modules */
+ for ( i = first_mod; i < mi->nr_mods; i++ )
+ {
+ paddr_t mod_s = mi->module[i].start;
+ paddr_t mod_e = mod_s + mi->module[i].size;
+
+ if ( s < mod_e && mod_s < e )
+ {
+ mod_e = consider_modules(mod_e, e, size, align, i+1);
+ if ( mod_e )
+ return mod_e;
+
+ return consider_modules(s, mod_s, size, align, i+1);
+ }
+ }
+
+ /*
+ * i is the current bootmodule we are evaluating, across all
+ * possible kinds of bootmodules.
+ *
+ * When retrieving the corresponding reserved-memory addresses, we
+ * need to index the reserved_mem bank starting from 0, and only counting
+ * the reserved-memory modules. Hence, we need to use i - nr.
+ */
+ nr = mi->nr_mods;
+ for ( ; i - nr < reserved_mem->nr_banks; i++ )
+ {
+ paddr_t r_s = reserved_mem->bank[i - nr].start;
+ paddr_t r_e = r_s + reserved_mem->bank[i - nr].size;
+
+ if ( s < r_e && r_s < e )
+ {
+ r_e = consider_modules(r_e, e, size, align, i + 1);
+ if ( r_e )
+ return r_e;
+
+ return consider_modules(s, r_s, size, align, i + 1);
+ }
+ }
+
+#ifdef CONFIG_STATIC_SHM
+ nr += reserved_mem->nr_banks;
+ for ( ; i - nr < shmem->nr_banks; i++ )
+ {
+ paddr_t r_s, r_e;
+
+ r_s = shmem->bank[i - nr].start;
+
+ /* Shared memory banks can contain INVALID_PADDR as start */
+ if ( INVALID_PADDR == r_s )
+ continue;
+
+ r_e = r_s + shmem->bank[i - nr].size;
+
+ if ( s < r_e && r_s < e )
+ {
+ r_e = consider_modules(r_e, e, size, align, i + 1);
+ if ( r_e )
+ return r_e;
+
+ return consider_modules(s, r_s, size, align, i + 1);
+ }
+ }
+#endif
+
+ return e;
+}
+
/*
* Boot-time pagetable setup.
* Changes here may need matching changes in head.S
Cache coloring must physically relocate Xen in order to color the hypervisor and consider_modules() is a key function that is needed to find a new available physical address. 672d67f339c0 ("xen/arm: Split MMU-specific setup_mm() and related code out") moved consider_modules() under arm32. Move it to mmu/setup.c and make it non-static so that it can be used outside. Signed-off-by: Carlo Nonato <carlo.nonato@minervasys.tech> --- v10: - no changes v9: - no changes v8: - patch adapted to new changes to consider_modules() v7: - moved consider_modules() to arm/mmu/setup.c v6: - new patch --- xen/arch/arm/arm32/mmu/mm.c | 95 +------------------------------ xen/arch/arm/include/asm/setup.h | 3 + xen/arch/arm/mmu/setup.c | 97 ++++++++++++++++++++++++++++++++ 3 files changed, 101 insertions(+), 94 deletions(-)