| Message ID | 20241121111218.50984-1-roger.pau@citrix.com (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | x86/pv: limit GDT and LDT mappings areas to max number of vCPUs | expand |
On 21/11/2024 11:12 am, Roger Pau Monne wrote: > The allocation of the paging structures in the per-domain area for mapping the > guest GDT and LDT can be limited to the maximum number of vCPUs the guest can > have. The maximum number of vCPUs is available at domain creation since commit > 4737fa52ce86. > > Limiting to the actual number of vCPUs avoids wasting memory for paging > structures that will never be used. Current logic unconditionally uses 513 > pages, one page for the L3, plus 512 L1 pages. For guests with equal or less > than 16 vCPUs only 2 pages are used (each guest vCPU GDT/LDT can only consume > 32 L1 slots). > > No functional change intended, all possible domain vCPUs should have the GDT > and LDT paging structures allocated and setup at domain creation, just like > before the change. > > Signed-off-by: Roger Pau Monné <roger.pau@citrix.com> Ooh, that's a optimisation I'd not considered when doing the work. But, is it really only the the LDT/GDT area which can benefit from this? The XLAT area seems like another good candidate. > --- > xen/arch/x86/pv/domain.c | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/xen/arch/x86/pv/domain.c b/xen/arch/x86/pv/domain.c > index d5a8564c1cbe..e861e3ce71d9 100644 > --- a/xen/arch/x86/pv/domain.c > +++ b/xen/arch/x86/pv/domain.c > @@ -346,7 +346,7 @@ void pv_domain_destroy(struct domain *d) > pv_l1tf_domain_destroy(d); > > destroy_perdomain_mapping(d, GDT_LDT_VIRT_START, > - GDT_LDT_MBYTES << (20 - PAGE_SHIFT)); > + d->max_vcpus << GDT_LDT_VCPU_SHIFT); Probably not for this patch, but, should we really be passing in a size here? Don't we just want to tear down everything in the relevant slot? > > XFREE(d->arch.pv.cpuidmasks); > > @@ -377,7 +377,7 @@ int pv_domain_initialise(struct domain *d) > goto fail; > > rc = create_perdomain_mapping(d, GDT_LDT_VIRT_START, > - GDT_LDT_MBYTES << (20 - PAGE_SHIFT), > + d->max_vcpus << GDT_LDT_VCPU_SHIFT, > NULL, NULL); I'd suggest putting a note here saying that the maximum bound for PV vCPUs is governed by GDT_LDT_MBYTES. Or alternatively, we could have create_perdomain_mapping() fail if it tries to allocate more than one slot's worth of mappings? It feels like an acceptable safety net. ~Andrew
On 21.11.2024 12:12, Roger Pau Monne wrote: > The allocation of the paging structures in the per-domain area for mapping the > guest GDT and LDT can be limited to the maximum number of vCPUs the guest can > have. The maximum number of vCPUs is available at domain creation since commit > 4737fa52ce86. > > Limiting to the actual number of vCPUs avoids wasting memory for paging > structures that will never be used. Current logic unconditionally uses 513 > pages, one page for the L3, plus 512 L1 pages. For guests with equal or less > than 16 vCPUs only 2 pages are used (each guest vCPU GDT/LDT can only consume > 32 L1 slots). > > No functional change intended, all possible domain vCPUs should have the GDT > and LDT paging structures allocated and setup at domain creation, just like > before the change. > > Signed-off-by: Roger Pau Monné <roger.pau@citrix.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> perhaps with the small adjustment Andrew has asked for. Jan
On Thu, Nov 21, 2024 at 11:26:19AM +0000, Andrew Cooper wrote: > On 21/11/2024 11:12 am, Roger Pau Monne wrote: > > The allocation of the paging structures in the per-domain area for mapping the > > guest GDT and LDT can be limited to the maximum number of vCPUs the guest can > > have. The maximum number of vCPUs is available at domain creation since commit > > 4737fa52ce86. > > > > Limiting to the actual number of vCPUs avoids wasting memory for paging > > structures that will never be used. Current logic unconditionally uses 513 > > pages, one page for the L3, plus 512 L1 pages. For guests with equal or less > > than 16 vCPUs only 2 pages are used (each guest vCPU GDT/LDT can only consume > > 32 L1 slots). > > > > No functional change intended, all possible domain vCPUs should have the GDT > > and LDT paging structures allocated and setup at domain creation, just like > > before the change. > > > > Signed-off-by: Roger Pau Monné <roger.pau@citrix.com> > > Ooh, that's a optimisation I'd not considered when doing the work. > > But, is it really only the the LDT/GDT area which can benefit from > this? The XLAT area seems like another good candidate. I don't see XLAT being pre-allocated like the GDT/LDT area is, it's only populated on a per-vCPU basis in setup_compat_arg_xlat() which is already bounded to the number of initialized vCPUs. > > --- > > xen/arch/x86/pv/domain.c | 4 ++-- > > 1 file changed, 2 insertions(+), 2 deletions(-) > > > > diff --git a/xen/arch/x86/pv/domain.c b/xen/arch/x86/pv/domain.c > > index d5a8564c1cbe..e861e3ce71d9 100644 > > --- a/xen/arch/x86/pv/domain.c > > +++ b/xen/arch/x86/pv/domain.c > > @@ -346,7 +346,7 @@ void pv_domain_destroy(struct domain *d) > > pv_l1tf_domain_destroy(d); > > > > destroy_perdomain_mapping(d, GDT_LDT_VIRT_START, > > - GDT_LDT_MBYTES << (20 - PAGE_SHIFT)); > > + d->max_vcpus << GDT_LDT_VCPU_SHIFT); > > Probably not for this patch, but, should we really be passing in a size > here? > > Don't we just want to tear down everything in the relevant slot? Hm, I've considered leaving that alone and keep passing GDT_LDT_MBYTES to destroy the whole slot. The performance advantage of not iterating over the known empty slots is negligible IMO. No strong opinion, I can leave as-is if it's considered better. > > > > XFREE(d->arch.pv.cpuidmasks); > > > > @@ -377,7 +377,7 @@ int pv_domain_initialise(struct domain *d) > > goto fail; > > > > rc = create_perdomain_mapping(d, GDT_LDT_VIRT_START, > > - GDT_LDT_MBYTES << (20 - PAGE_SHIFT), > > + d->max_vcpus << GDT_LDT_VCPU_SHIFT, > > NULL, NULL); > > I'd suggest putting a note here saying that the maximum bound for PV > vCPUs is governed by GDT_LDT_MBYTES. Yeah, MAX_VIRT_CPUS is already calculated based on GDT_LDT_MBYTES. > Or alternatively, we could have create_perdomain_mapping() fail if it > tries to allocate more than one slot's worth of mappings? It feels > like an acceptable safety net. I would rather use something like: if ( (d->max_vcpus << GDT_LDT_VCPU_SHIFT) > (PERDOMAIN_SLOT_MBYTES << (20 - PAGE_SHIFT)) ) ASSERT_UNREACHABLE(); return -EINVAL; } As it should be impossible to call pv_domain_initialise() with a number of vCPUs past what fits in the GDT/LDT slot. arch_sanitise_domain_config() should have filtered such attempt before it gets into pv_domain_initialise(). Thanks, Roger.
diff --git a/xen/arch/x86/pv/domain.c b/xen/arch/x86/pv/domain.c index d5a8564c1cbe..e861e3ce71d9 100644 --- a/xen/arch/x86/pv/domain.c +++ b/xen/arch/x86/pv/domain.c @@ -346,7 +346,7 @@ void pv_domain_destroy(struct domain *d) pv_l1tf_domain_destroy(d); destroy_perdomain_mapping(d, GDT_LDT_VIRT_START, - GDT_LDT_MBYTES << (20 - PAGE_SHIFT)); + d->max_vcpus << GDT_LDT_VCPU_SHIFT); XFREE(d->arch.pv.cpuidmasks); @@ -377,7 +377,7 @@ int pv_domain_initialise(struct domain *d) goto fail; rc = create_perdomain_mapping(d, GDT_LDT_VIRT_START, - GDT_LDT_MBYTES << (20 - PAGE_SHIFT), + d->max_vcpus << GDT_LDT_VCPU_SHIFT, NULL, NULL); if ( rc ) goto fail;
The allocation of the paging structures in the per-domain area for mapping the guest GDT and LDT can be limited to the maximum number of vCPUs the guest can have. The maximum number of vCPUs is available at domain creation since commit 4737fa52ce86. Limiting to the actual number of vCPUs avoids wasting memory for paging structures that will never be used. Current logic unconditionally uses 513 pages, one page for the L3, plus 512 L1 pages. For guests with equal or less than 16 vCPUs only 2 pages are used (each guest vCPU GDT/LDT can only consume 32 L1 slots). No functional change intended, all possible domain vCPUs should have the GDT and LDT paging structures allocated and setup at domain creation, just like before the change. Signed-off-by: Roger Pau Monné <roger.pau@citrix.com> --- xen/arch/x86/pv/domain.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)