@@ -49,50 +49,6 @@ bool __init is_dom0less_mode(void)
return ( !dom0found && domUfound );
}
-static void __init allocate_memory(struct domain *d, struct kernel_info *kinfo)
-{
- struct membanks *mem = kernel_info_get_mem(kinfo);
- unsigned int i;
- paddr_t bank_size;
-
- printk(XENLOG_INFO "Allocating mappings totalling %ldMB for %pd:\n",
- /* Don't want format this as PRIpaddr (16 digit hex) */
- (unsigned long)(kinfo->unassigned_mem >> 20), d);
-
- mem->nr_banks = 0;
- bank_size = MIN(GUEST_RAM0_SIZE, kinfo->unassigned_mem);
- if ( !allocate_bank_memory(kinfo, gaddr_to_gfn(GUEST_RAM0_BASE),
- bank_size) )
- goto fail;
-
- bank_size = MIN(GUEST_RAM1_SIZE, kinfo->unassigned_mem);
- if ( !allocate_bank_memory(kinfo, gaddr_to_gfn(GUEST_RAM1_BASE),
- bank_size) )
- goto fail;
-
- if ( kinfo->unassigned_mem )
- goto fail;
-
- for( i = 0; i < mem->nr_banks; i++ )
- {
- printk(XENLOG_INFO "%pd BANK[%d] %#"PRIpaddr"-%#"PRIpaddr" (%ldMB)\n",
- d,
- i,
- mem->bank[i].start,
- mem->bank[i].start + mem->bank[i].size,
- /* Don't want format this as PRIpaddr (16 digit hex) */
- (unsigned long)(mem->bank[i].size >> 20));
- }
-
- return;
-
-fail:
- panic("Failed to allocate requested domain memory."
- /* Don't want format this as PRIpaddr (16 digit hex) */
- " %ldKB unallocated. Fix the VMs configurations.\n",
- (unsigned long)kinfo->unassigned_mem >> 10);
-}
-
#ifdef CONFIG_VGICV2
static int __init make_gicv2_domU_node(struct kernel_info *kinfo)
{
@@ -416,7 +416,6 @@ static void __init allocate_memory_11(struct domain *d,
}
}
-#ifdef CONFIG_DOM0LESS_BOOT
bool __init allocate_domheap_memory(struct domain *d, paddr_t tot_size,
alloc_domheap_mem_cb cb, void *extra)
{
@@ -508,7 +507,6 @@ bool __init allocate_bank_memory(struct kernel_info *kinfo, gfn_t sgfn,
return true;
}
-#endif
/*
* When PCI passthrough is available we want to keep the
@@ -1003,6 +1001,94 @@ out:
return res;
}
+void __init allocate_memory(struct domain *d, struct kernel_info *kinfo)
+{
+ struct membanks *mem = kernel_info_get_mem(kinfo);
+ unsigned int i, nr_banks = GUEST_RAM_BANKS;
+ paddr_t bank_start, bank_size;
+ struct membanks *hwdom_free_mem = NULL;
+ const uint64_t bankbase[] = GUEST_RAM_BANK_BASES;
+ const uint64_t banksize[] = GUEST_RAM_BANK_SIZES;
+
+ printk(XENLOG_INFO "Allocating mappings totalling %ldMB for %pd:\n",
+ /* Don't want format this as PRIpaddr (16 digit hex) */
+ (unsigned long)(kinfo->unassigned_mem >> 20), d);
+
+ mem->nr_banks = 0;
+ /*
+ * Use host memory layout for hwdom. Only case for this is when LLC coloring
+ * is enabled.
+ */
+ if ( is_hardware_domain(d) )
+ {
+ ASSERT(llc_coloring_enabled);
+
+ hwdom_free_mem = xzalloc_flex_struct(struct membanks, bank,
+ NR_MEM_BANKS);
+ if ( !hwdom_free_mem )
+ goto fail;
+
+ hwdom_free_mem->max_banks = NR_MEM_BANKS;
+
+ if ( find_unallocated_memory(kinfo, hwdom_free_mem) )
+ goto fail;
+
+ nr_banks = hwdom_free_mem->nr_banks;
+ }
+
+ for ( i = 0; kinfo->unassigned_mem > 0 && nr_banks > 0; i++, nr_banks-- )
+ {
+ if ( is_hardware_domain(d) )
+ {
+ bank_start = hwdom_free_mem->bank[i].start;
+ bank_size = hwdom_free_mem->bank[i].size;
+
+ /*
+ * Skip banks that are too small. The first bank must contain
+ * dom0 kernel + ramdisk + dtb and 128 MB is the same limit used
+ * in allocate_memory_11().
+ */
+ if ( bank_size < min_t(paddr_t, kinfo->unassigned_mem, MB(128)) )
+ continue;
+ }
+ else
+ {
+ if ( i >= GUEST_RAM_BANKS )
+ goto fail;
+
+ bank_start = bankbase[i];
+ bank_size = banksize[i];
+ }
+
+ bank_size = MIN(bank_size, kinfo->unassigned_mem);
+ if ( !allocate_bank_memory(kinfo, gaddr_to_gfn(bank_start), bank_size) )
+ goto fail;
+ }
+
+ if ( kinfo->unassigned_mem )
+ goto fail;
+
+ for( i = 0; i < mem->nr_banks; i++ )
+ {
+ printk(XENLOG_INFO "%pd BANK[%d] %#"PRIpaddr"-%#"PRIpaddr" (%ldMB)\n",
+ d,
+ i,
+ mem->bank[i].start,
+ mem->bank[i].start + mem->bank[i].size,
+ /* Don't want format this as PRIpaddr (16 digit hex) */
+ (unsigned long)(mem->bank[i].size >> 20));
+ }
+
+ xfree(hwdom_free_mem);
+ return;
+
+fail:
+ panic("Failed to allocate requested domain memory."
+ /* Don't want format this as PRIpaddr (16 digit hex) */
+ " %ldKB unallocated. Fix the VMs configurations.\n",
+ (unsigned long)kinfo->unassigned_mem >> 10);
+}
+
static int __init handle_pci_range(const struct dt_device_node *dev,
uint64_t addr, uint64_t len, void *data)
{
@@ -1223,7 +1309,7 @@ int __init make_hypervisor_node(struct domain *d,
ext_regions->max_banks = NR_MEM_BANKS;
- if ( is_domain_direct_mapped(d) )
+ if ( domain_use_host_layout(d) )
{
if ( !is_iommu_enabled(d) )
res = find_unallocated_memory(kinfo, ext_regions);
@@ -2152,7 +2238,10 @@ static int __init construct_dom0(struct domain *d)
/* type must be set before allocate_memory */
d->arch.type = kinfo.type;
#endif
- allocate_memory_11(d, &kinfo);
+ if ( is_domain_direct_mapped(d) )
+ allocate_memory_11(d, &kinfo);
+ else
+ allocate_memory(d, &kinfo);
find_gnttab_region(d, &kinfo);
rc = process_shm_chosen(d, &kinfo);
@@ -11,6 +11,7 @@ bool allocate_domheap_memory(struct domain *d, paddr_t tot_size,
alloc_domheap_mem_cb cb, void *extra);
bool allocate_bank_memory(struct kernel_info *kinfo, gfn_t sgfn,
paddr_t tot_size);
+void allocate_memory(struct domain *d, struct kernel_info *kinfo);
int construct_domain(struct domain *d, struct kernel_info *kinfo);
int domain_fdt_begin_node(void *fdt, const char *name, uint64_t unit);
int make_chosen_node(const struct kernel_info *kinfo);
Cache coloring requires Dom0 not to be direct-mapped because of its non contiguous mapping nature, so allocate_memory() is needed in this case. 8d2c3ab18cc1 ("arm/dom0less: put dom0less feature code in a separate module") moved allocate_memory() in dom0less_build.c. In order to use it in Dom0 construction bring it back to domain_build.c and declare it in domain_build.h. Take the opportunity to adapt the implementation of allocate_memory() so that it uses the host layout when called on the hwdom, via find_unallocated_memory(). Signed-off-by: Carlo Nonato <carlo.nonato@minervasys.tech> --- v11: - GUEST_RAM_BANKS instead of hardcoding the number of banks in allocate_memory() - hwdom_ext_regions -> hwdom_free_mem in allocate_memory() - added a comment in allocate_memory() when skipping small banks v10: - fixed a compilation bug that happened when dom0less support was disabled v9: - no changes v8: - patch adapted to new changes to allocate_memory() v7: - allocate_memory() now uses the host layout when called on the hwdom v6: - new patch --- xen/arch/arm/dom0less-build.c | 44 ----------- xen/arch/arm/domain_build.c | 97 ++++++++++++++++++++++++- xen/arch/arm/include/asm/domain_build.h | 1 + 3 files changed, 94 insertions(+), 48 deletions(-)