@@ -40,6 +40,7 @@
#include <asm/irq_vectors.h>
#include <asm/cpufeatures.h>
#include <asm/alternative-asm.h>
+#include <asm/paravirt-asm.h>
#include <asm/asm.h>
#include <asm/smap.h>
#include <asm/frame.h>
@@ -30,7 +30,7 @@
#include <asm/hw_irq.h>
#include <asm/page_types.h>
#include <asm/irqflags.h>
-#include <asm/paravirt.h>
+#include <asm/paravirt-asm.h>
#include <asm/percpu.h>
#include <asm/asm.h>
#include <asm/smap.h>
@@ -13,6 +13,7 @@
#include <asm/irqflags.h>
#include <asm/asm.h>
#include <asm/smap.h>
+#include <asm/paravirt-asm.h>
#include <linux/linkage.h>
#include <linux/err.h>
new file mode 100644
@@ -0,0 +1,126 @@
+#ifndef _ASM_X86_PARAVIRT_ASM_H
+#define _ASM_X86_PARAVIRT_ASM_H
+
+#ifdef CONFIG_PARAVIRT
+#ifdef __ASSEMBLY__
+
+#include <asm/asm.h>
+#include <asm/paravirt_types.h>
+
+#define _PVSITE(ptype, clobbers, ops, word, algn) \
+771:; \
+ ops; \
+772:; \
+ .pushsection .parainstructions,"a"; \
+ .align algn; \
+ word 771b; \
+ .byte ptype; \
+ .byte 772b-771b; \
+ .short clobbers; \
+ .popsection
+
+
+#define COND_PUSH(set, mask, reg) \
+ .if ((~(set)) & mask); push %reg; .endif
+#define COND_POP(set, mask, reg) \
+ .if ((~(set)) & mask); pop %reg; .endif
+
+#ifdef CONFIG_X86_64
+
+#define PV_SAVE_REGS(set) \
+ COND_PUSH(set, CLBR_RAX, rax); \
+ COND_PUSH(set, CLBR_RCX, rcx); \
+ COND_PUSH(set, CLBR_RDX, rdx); \
+ COND_PUSH(set, CLBR_RSI, rsi); \
+ COND_PUSH(set, CLBR_RDI, rdi); \
+ COND_PUSH(set, CLBR_R8, r8); \
+ COND_PUSH(set, CLBR_R9, r9); \
+ COND_PUSH(set, CLBR_R10, r10); \
+ COND_PUSH(set, CLBR_R11, r11)
+#define PV_RESTORE_REGS(set) \
+ COND_POP(set, CLBR_R11, r11); \
+ COND_POP(set, CLBR_R10, r10); \
+ COND_POP(set, CLBR_R9, r9); \
+ COND_POP(set, CLBR_R8, r8); \
+ COND_POP(set, CLBR_RDI, rdi); \
+ COND_POP(set, CLBR_RSI, rsi); \
+ COND_POP(set, CLBR_RDX, rdx); \
+ COND_POP(set, CLBR_RCX, rcx); \
+ COND_POP(set, CLBR_RAX, rax)
+
+#define PARA_PATCH(struct, off) ((PARAVIRT_PATCH_##struct + (off)) / 8)
+#define PARA_SITE(ptype, clobbers, ops) _PVSITE(ptype, clobbers, ops, .quad, 8)
+#define PARA_INDIRECT(addr) *addr(%rip)
+#else
+#define PV_SAVE_REGS(set) \
+ COND_PUSH(set, CLBR_EAX, eax); \
+ COND_PUSH(set, CLBR_EDI, edi); \
+ COND_PUSH(set, CLBR_ECX, ecx); \
+ COND_PUSH(set, CLBR_EDX, edx)
+#define PV_RESTORE_REGS(set) \
+ COND_POP(set, CLBR_EDX, edx); \
+ COND_POP(set, CLBR_ECX, ecx); \
+ COND_POP(set, CLBR_EDI, edi); \
+ COND_POP(set, CLBR_EAX, eax)
+
+#define PARA_PATCH(struct, off) ((PARAVIRT_PATCH_##struct + (off)) / 4)
+#define PARA_SITE(ptype, clobbers, ops) _PVSITE(ptype, clobbers, ops, .long, 4)
+#define PARA_INDIRECT(addr) *%cs:addr
+#endif
+
+#define INTERRUPT_RETURN \
+ PARA_SITE(PARA_PATCH(pv_cpu_ops, PV_CPU_iret), CLBR_NONE, \
+ jmp PARA_INDIRECT(pv_cpu_ops+PV_CPU_iret))
+
+#define DISABLE_INTERRUPTS(clobbers) \
+ PARA_SITE(PARA_PATCH(pv_irq_ops, PV_IRQ_irq_disable), clobbers, \
+ PV_SAVE_REGS(clobbers | CLBR_CALLEE_SAVE); \
+ call PARA_INDIRECT(pv_irq_ops+PV_IRQ_irq_disable); \
+ PV_RESTORE_REGS(clobbers | CLBR_CALLEE_SAVE);)
+
+#define ENABLE_INTERRUPTS(clobbers) \
+ PARA_SITE(PARA_PATCH(pv_irq_ops, PV_IRQ_irq_enable), clobbers, \
+ PV_SAVE_REGS(clobbers | CLBR_CALLEE_SAVE); \
+ call PARA_INDIRECT(pv_irq_ops+PV_IRQ_irq_enable); \
+ PV_RESTORE_REGS(clobbers | CLBR_CALLEE_SAVE);)
+
+#ifdef CONFIG_X86_32
+#define GET_CR0_INTO_EAX \
+ push %ecx; push %edx; \
+ call PARA_INDIRECT(pv_cpu_ops+PV_CPU_read_cr0); \
+ pop %edx; pop %ecx
+#else /* !CONFIG_X86_32 */
+
+/*
+ * If swapgs is used while the userspace stack is still current,
+ * there's no way to call a pvop. The PV replacement *must* be
+ * inlined, or the swapgs instruction must be trapped and emulated.
+ */
+#define SWAPGS_UNSAFE_STACK \
+ PARA_SITE(PARA_PATCH(pv_cpu_ops, PV_CPU_swapgs), CLBR_NONE, \
+ swapgs)
+
+/*
+ * Note: swapgs is very special, and in practise is either going to be
+ * implemented with a single "swapgs" instruction or something very
+ * special. Either way, we don't need to save any registers for
+ * it.
+ */
+#define SWAPGS \
+ PARA_SITE(PARA_PATCH(pv_cpu_ops, PV_CPU_swapgs), CLBR_NONE, \
+ call PARA_INDIRECT(pv_cpu_ops+PV_CPU_swapgs) \
+ )
+
+#define GET_CR2_INTO_RAX \
+ call PARA_INDIRECT(pv_mmu_ops+PV_MMU_read_cr2)
+
+#define USERGS_SYSRET64 \
+ PARA_SITE(PARA_PATCH(pv_cpu_ops, PV_CPU_usergs_sysret64), \
+ CLBR_NONE, \
+ jmp PARA_INDIRECT(pv_cpu_ops+PV_CPU_usergs_sysret64))
+#endif /* CONFIG_X86_32 */
+
+#endif /* __ASSEMBLY__ */
+#endif /* CONFIG_PARAVIRT */
+
+#endif /* _ASM_X86_PARAVIRT_ASM_H */
@@ -3,17 +3,16 @@
/* Various instructions on x86 need to be replaced for
* para-virtualization: those hooks are defined here. */
-#ifdef CONFIG_PARAVIRT
-#include <asm/pgtable_types.h>
-#include <asm/asm.h>
+#ifndef __ASSEMBLY__
-#include <asm/paravirt_types.h>
+#ifdef CONFIG_PARAVIRT
-#ifndef __ASSEMBLY__
#include <linux/bug.h>
#include <linux/types.h>
#include <linux/cpumask.h>
#include <asm/frame.h>
+#include <asm/pgtable_types.h>
+#include <asm/paravirt_types.h>
static inline void load_sp0(struct tss_struct *tss,
struct thread_struct *thread)
@@ -809,125 +808,8 @@ static inline notrace unsigned long arch_local_irq_save(void)
extern void default_banner(void);
-#else /* __ASSEMBLY__ */
-
-#define _PVSITE(ptype, clobbers, ops, word, algn) \
-771:; \
- ops; \
-772:; \
- .pushsection .parainstructions,"a"; \
- .align algn; \
- word 771b; \
- .byte ptype; \
- .byte 772b-771b; \
- .short clobbers; \
- .popsection
-
-
-#define COND_PUSH(set, mask, reg) \
- .if ((~(set)) & mask); push %reg; .endif
-#define COND_POP(set, mask, reg) \
- .if ((~(set)) & mask); pop %reg; .endif
-
-#ifdef CONFIG_X86_64
-
-#define PV_SAVE_REGS(set) \
- COND_PUSH(set, CLBR_RAX, rax); \
- COND_PUSH(set, CLBR_RCX, rcx); \
- COND_PUSH(set, CLBR_RDX, rdx); \
- COND_PUSH(set, CLBR_RSI, rsi); \
- COND_PUSH(set, CLBR_RDI, rdi); \
- COND_PUSH(set, CLBR_R8, r8); \
- COND_PUSH(set, CLBR_R9, r9); \
- COND_PUSH(set, CLBR_R10, r10); \
- COND_PUSH(set, CLBR_R11, r11)
-#define PV_RESTORE_REGS(set) \
- COND_POP(set, CLBR_R11, r11); \
- COND_POP(set, CLBR_R10, r10); \
- COND_POP(set, CLBR_R9, r9); \
- COND_POP(set, CLBR_R8, r8); \
- COND_POP(set, CLBR_RDI, rdi); \
- COND_POP(set, CLBR_RSI, rsi); \
- COND_POP(set, CLBR_RDX, rdx); \
- COND_POP(set, CLBR_RCX, rcx); \
- COND_POP(set, CLBR_RAX, rax)
-
-#define PARA_PATCH(struct, off) ((PARAVIRT_PATCH_##struct + (off)) / 8)
-#define PARA_SITE(ptype, clobbers, ops) _PVSITE(ptype, clobbers, ops, .quad, 8)
-#define PARA_INDIRECT(addr) *addr(%rip)
-#else
-#define PV_SAVE_REGS(set) \
- COND_PUSH(set, CLBR_EAX, eax); \
- COND_PUSH(set, CLBR_EDI, edi); \
- COND_PUSH(set, CLBR_ECX, ecx); \
- COND_PUSH(set, CLBR_EDX, edx)
-#define PV_RESTORE_REGS(set) \
- COND_POP(set, CLBR_EDX, edx); \
- COND_POP(set, CLBR_ECX, ecx); \
- COND_POP(set, CLBR_EDI, edi); \
- COND_POP(set, CLBR_EAX, eax)
-
-#define PARA_PATCH(struct, off) ((PARAVIRT_PATCH_##struct + (off)) / 4)
-#define PARA_SITE(ptype, clobbers, ops) _PVSITE(ptype, clobbers, ops, .long, 4)
-#define PARA_INDIRECT(addr) *%cs:addr
-#endif
-
-#define INTERRUPT_RETURN \
- PARA_SITE(PARA_PATCH(pv_cpu_ops, PV_CPU_iret), CLBR_NONE, \
- jmp PARA_INDIRECT(pv_cpu_ops+PV_CPU_iret))
-
-#define DISABLE_INTERRUPTS(clobbers) \
- PARA_SITE(PARA_PATCH(pv_irq_ops, PV_IRQ_irq_disable), clobbers, \
- PV_SAVE_REGS(clobbers | CLBR_CALLEE_SAVE); \
- call PARA_INDIRECT(pv_irq_ops+PV_IRQ_irq_disable); \
- PV_RESTORE_REGS(clobbers | CLBR_CALLEE_SAVE);)
-
-#define ENABLE_INTERRUPTS(clobbers) \
- PARA_SITE(PARA_PATCH(pv_irq_ops, PV_IRQ_irq_enable), clobbers, \
- PV_SAVE_REGS(clobbers | CLBR_CALLEE_SAVE); \
- call PARA_INDIRECT(pv_irq_ops+PV_IRQ_irq_enable); \
- PV_RESTORE_REGS(clobbers | CLBR_CALLEE_SAVE);)
-
-#ifdef CONFIG_X86_32
-#define GET_CR0_INTO_EAX \
- push %ecx; push %edx; \
- call PARA_INDIRECT(pv_cpu_ops+PV_CPU_read_cr0); \
- pop %edx; pop %ecx
-#else /* !CONFIG_X86_32 */
-
-/*
- * If swapgs is used while the userspace stack is still current,
- * there's no way to call a pvop. The PV replacement *must* be
- * inlined, or the swapgs instruction must be trapped and emulated.
- */
-#define SWAPGS_UNSAFE_STACK \
- PARA_SITE(PARA_PATCH(pv_cpu_ops, PV_CPU_swapgs), CLBR_NONE, \
- swapgs)
-
-/*
- * Note: swapgs is very special, and in practise is either going to be
- * implemented with a single "swapgs" instruction or something very
- * special. Either way, we don't need to save any registers for
- * it.
- */
-#define SWAPGS \
- PARA_SITE(PARA_PATCH(pv_cpu_ops, PV_CPU_swapgs), CLBR_NONE, \
- call PARA_INDIRECT(pv_cpu_ops+PV_CPU_swapgs) \
- )
-
-#define GET_CR2_INTO_RAX \
- call PARA_INDIRECT(pv_mmu_ops+PV_MMU_read_cr2)
-
-#define USERGS_SYSRET64 \
- PARA_SITE(PARA_PATCH(pv_cpu_ops, PV_CPU_usergs_sysret64), \
- CLBR_NONE, \
- jmp PARA_INDIRECT(pv_cpu_ops+PV_CPU_usergs_sysret64))
-#endif /* CONFIG_X86_32 */
-
-#endif /* __ASSEMBLY__ */
-#else /* CONFIG_PARAVIRT */
+#else /* !CONFIG_PARAVIRT */
# define default_banner x86_init_noop
-#ifndef __ASSEMBLY__
static inline void paravirt_arch_dup_mmap(struct mm_struct *oldmm,
struct mm_struct *mm)
{
@@ -936,6 +818,8 @@ static inline void paravirt_arch_dup_mmap(struct mm_struct *oldmm,
static inline void paravirt_arch_exit_mmap(struct mm_struct *mm)
{
}
-#endif /* __ASSEMBLY__ */
#endif /* !CONFIG_PARAVIRT */
+
+#endif /* __ASSEMBLY__ */
+
#endif /* _ASM_X86_PARAVIRT_H */
@@ -25,7 +25,7 @@
#ifdef CONFIG_PARAVIRT
#include <asm/asm-offsets.h>
-#include <asm/paravirt.h>
+#include <asm/paravirt-asm.h>
#define GET_CR2_INTO(reg) GET_CR2_INTO_RAX ; movq %rax, reg
#else
#define GET_CR2_INTO(reg) movq %cr2, reg
The paravirt.h file is quite big and the asm interfaces for paravirt don't need to be in the same file as the C interfaces. Move the asm interfaces to a dedicated header file. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> --- arch/x86/entry/entry_32.S | 1 + arch/x86/entry/entry_64.S | 2 +- arch/x86/entry/entry_64_compat.S | 1 + arch/x86/include/asm/paravirt-asm.h | 126 ++++++++++++++++++++++++++++++++++ arch/x86/include/asm/paravirt.h | 132 +++--------------------------------- arch/x86/kernel/head_64.S | 2 +- 6 files changed, 138 insertions(+), 126 deletions(-) create mode 100644 arch/x86/include/asm/paravirt-asm.h