diff mbox series

[03/12] automation: switch to alpine:3.19

Message ID a681e1d414c0735128cdde70d6b521d8c96e6e45.1715867907.git-series.marmarek@invisiblethingslab.com (mailing list archive)
State New, archived
Headers show
Series automation: Add build and test for Linux stubdomain | expand

Commit Message

Marek Marczykowski-Górecki May 16, 2024, 1:58 p.m. UTC 
Alpine 3.19 is needed for upcoming stubdomain tests, as linux stubdomain
build requires dracut-core package (dracut-install tool specifically)
which isn't available in 3.18. While technically it will be needed only
in the x86_64 builds, switch Alpine version everywhere for uniformity.
Note this bumps kernel version requirement on docker runners -
dracut-install uses faccessat2() syscall which was introduced in Linux
5.8.

Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
---
 automation/build/alpine/3.18-arm64v8.dockerfile           | 49 +------
 automation/build/alpine/3.18.dockerfile                   | 51 +------
 automation/build/alpine/3.19-arm64v8.dockerfile           | 49 ++++++-
 automation/build/alpine/3.19.dockerfile                   | 51 ++++++-
 automation/gitlab-ci/build.yaml                           | 56 +++----
 automation/gitlab-ci/test.yaml                            | 52 +++---
 automation/scripts/containerize                           |  4 +-
 automation/tests-artifacts/alpine/3.18-arm64v8.dockerfile | 65 +--------
 automation/tests-artifacts/alpine/3.18.dockerfile         | 66 +--------
 automation/tests-artifacts/alpine/3.19-arm64v8.dockerfile | 65 ++++++++-
 automation/tests-artifacts/alpine/3.19.dockerfile         | 67 ++++++++-
 11 files changed, 288 insertions(+), 287 deletions(-)
 delete mode 100644 automation/build/alpine/3.18-arm64v8.dockerfile
 delete mode 100644 automation/build/alpine/3.18.dockerfile
 create mode 100644 automation/build/alpine/3.19-arm64v8.dockerfile
 create mode 100644 automation/build/alpine/3.19.dockerfile
 delete mode 100644 automation/tests-artifacts/alpine/3.18-arm64v8.dockerfile
 delete mode 100644 automation/tests-artifacts/alpine/3.18.dockerfile
 create mode 100644 automation/tests-artifacts/alpine/3.19-arm64v8.dockerfile
 create mode 100644 automation/tests-artifacts/alpine/3.19.dockerfile

Comments

Stefano Stabellini May 17, 2024, 9:58 p.m. UTC | #1 
On Thu, 16 May 2024, Marek Marczykowski-Górecki wrote:
> Alpine 3.19 is needed for upcoming stubdomain tests, as linux stubdomain
> build requires dracut-core package (dracut-install tool specifically)
> which isn't available in 3.18. While technically it will be needed only
> in the x86_64 builds, switch Alpine version everywhere for uniformity.
> Note this bumps kernel version requirement on docker runners -
> dracut-install uses faccessat2() syscall which was introduced in Linux
> 5.8.
> 
> Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>

Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
diff mbox series

Patch

diff --git a/automation/build/alpine/3.18-arm64v8.dockerfile b/automation/build/alpine/3.18-arm64v8.dockerfile
deleted file mode 100644
index 91e90220240f..000000000000
--- a/automation/build/alpine/3.18-arm64v8.dockerfile
+++ /dev/null
@@ -1,49 +0,0 @@ 
-FROM --platform=linux/arm64/v8 alpine:3.18
-LABEL maintainer.name="The Xen Project" \
-      maintainer.email="xen-devel@lists.xenproject.org"
-
-ENV USER root
-
-RUN mkdir /build
-WORKDIR /build
-
-# build depends
-RUN apk --no-cache add \
-  \
-  # xen build deps
-  argp-standalone \
-  autoconf \
-  bash \
-  bison \
-  curl \
-  dev86 \
-  dtc-dev \
-  flex \
-  gcc \
-  git \
-  iasl \
-  libaio-dev \
-  libfdt \
-  linux-headers \
-  make \
-  musl-dev  \
-  ncurses-dev \
-  ocaml \
-  ocaml-findlib \
-  patch  \
-  python3-dev \
-  py3-setuptools \
-  texinfo \
-  util-linux-dev \
-  xz-dev \
-  yajl-dev \
-  zlib-dev \
-  \
-  # qemu build deps
-  glib-dev \
-  libattr \
-  libcap-ng-dev \
-  pixman-dev \
-  # qubes test deps
-  openssh-client \
-  fakeroot \
diff --git a/automation/build/alpine/3.18.dockerfile b/automation/build/alpine/3.18.dockerfile
deleted file mode 100644
index 8d5dac05b01f..000000000000
--- a/automation/build/alpine/3.18.dockerfile
+++ /dev/null
@@ -1,51 +0,0 @@ 
-FROM --platform=linux/amd64 alpine:3.18
-LABEL maintainer.name="The Xen Project" \
-      maintainer.email="xen-devel@lists.xenproject.org"
-
-ENV USER root
-
-RUN mkdir /build
-WORKDIR /build
-
-# build depends
-RUN apk --no-cache add \
-  \
-  # xen build deps
-  argp-standalone \
-  autoconf \
-  bash \
-  bison \
-  clang \
-  curl \
-  dev86 \
-  flex \
-  g++ \
-  gcc \
-  git \
-  grep \
-  iasl \
-  libaio-dev \
-  libc6-compat \
-  linux-headers \
-  make \
-  musl-dev  \
-  ncurses-dev \
-  ocaml \
-  ocaml-findlib \
-  patch  \
-  python3-dev \
-  py3-setuptools \
-  texinfo \
-  util-linux-dev \
-  xz-dev \
-  yajl-dev \
-  zlib-dev \
-  \
-  # qemu build deps
-  glib-dev \
-  libattr \
-  libcap-ng-dev \
-  ninja \
-  pixman-dev \
-  # livepatch-tools deps
-  elfutils-dev \
diff --git a/automation/build/alpine/3.19-arm64v8.dockerfile b/automation/build/alpine/3.19-arm64v8.dockerfile
new file mode 100644
index 000000000000..158cf465a9ff
--- /dev/null
+++ b/automation/build/alpine/3.19-arm64v8.dockerfile
@@ -0,0 +1,49 @@ 
+FROM --platform=linux/arm64/v8 alpine:3.19
+LABEL maintainer.name="The Xen Project" \
+      maintainer.email="xen-devel@lists.xenproject.org"
+
+ENV USER root
+
+RUN mkdir /build
+WORKDIR /build
+
+# build depends
+RUN apk --no-cache add \
+  \
+  # xen build deps
+  argp-standalone \
+  autoconf \
+  bash \
+  bison \
+  curl \
+  dev86 \
+  dtc-dev \
+  flex \
+  gcc \
+  git \
+  iasl \
+  libaio-dev \
+  libfdt \
+  linux-headers \
+  make \
+  musl-dev  \
+  ncurses-dev \
+  ocaml \
+  ocaml-findlib \
+  patch  \
+  python3-dev \
+  py3-setuptools \
+  texinfo \
+  util-linux-dev \
+  xz-dev \
+  yajl-dev \
+  zlib-dev \
+  \
+  # qemu build deps
+  glib-dev \
+  libattr \
+  libcap-ng-dev \
+  pixman-dev \
+  # qubes test deps
+  openssh-client \
+  fakeroot \
diff --git a/automation/build/alpine/3.19.dockerfile b/automation/build/alpine/3.19.dockerfile
new file mode 100644
index 000000000000..0be6d7c85fe7
--- /dev/null
+++ b/automation/build/alpine/3.19.dockerfile
@@ -0,0 +1,51 @@ 
+FROM --platform=linux/amd64 alpine:3.19
+LABEL maintainer.name="The Xen Project" \
+      maintainer.email="xen-devel@lists.xenproject.org"
+
+ENV USER root
+
+RUN mkdir /build
+WORKDIR /build
+
+# build depends
+RUN apk --no-cache add \
+  \
+  # xen build deps
+  argp-standalone \
+  autoconf \
+  bash \
+  bison \
+  clang \
+  curl \
+  dev86 \
+  flex \
+  g++ \
+  gcc \
+  git \
+  grep \
+  iasl \
+  libaio-dev \
+  libc6-compat \
+  linux-headers \
+  make \
+  musl-dev  \
+  ncurses-dev \
+  ocaml \
+  ocaml-findlib \
+  patch  \
+  python3-dev \
+  py3-setuptools \
+  texinfo \
+  util-linux-dev \
+  xz-dev \
+  yajl-dev \
+  zlib-dev \
+  \
+  # qemu build deps
+  glib-dev \
+  libattr \
+  libcap-ng-dev \
+  ninja \
+  pixman-dev \
+  # livepatch-tools deps
+  elfutils-dev \
diff --git a/automation/gitlab-ci/build.yaml b/automation/gitlab-ci/build.yaml
index 69665ec5b11f..b186289bbd82 100644
--- a/automation/gitlab-ci/build.yaml
+++ b/automation/gitlab-ci/build.yaml
@@ -258,9 +258,9 @@ 
 
 # Arm test artifacts
 
-alpine-3.18-arm64-rootfs-export:
+alpine-3.19-arm64-rootfs-export:
   extends: .test-jobs-artifact-common
-  image: registry.gitlab.com/xen-project/xen/tests-artifacts/alpine:3.18-arm64v8
+  image: registry.gitlab.com/xen-project/xen/tests-artifacts/alpine:3.19-arm64v8
   script:
     - mkdir binaries && cp /initrd.tar.gz binaries/initrd.tar.gz
   artifacts:
@@ -318,9 +318,9 @@  qemu-system-ppc64-8.1.0-ppc64-export:
 
 # x86_64 test artifacts
 
-alpine-3.18-rootfs-export:
+alpine-3.19-rootfs-export:
   extends: .test-jobs-artifact-common
-  image: registry.gitlab.com/xen-project/xen/tests-artifacts/alpine:3.18
+  image: registry.gitlab.com/xen-project/xen/tests-artifacts/alpine:3.19
   script:
     - mkdir binaries && cp /initrd.tar.gz binaries/initrd.tar.gz
   artifacts:
@@ -344,15 +344,15 @@  kernel-6.1.19-export:
 
 # Build jobs needed for tests
 
-alpine-3.18-gcc:
+alpine-3.19-gcc:
   extends: .gcc-x86-64-build
   variables:
-    CONTAINER: alpine:3.18
+    CONTAINER: alpine:3.19
 
-alpine-3.18-gcc-debug:
+alpine-3.19-gcc-debug:
   extends: .gcc-x86-64-build-debug
   variables:
-    CONTAINER: alpine:3.18
+    CONTAINER: alpine:3.19
 
 debian-stretch-gcc-debug:
   extends: .gcc-x86-64-build-debug
@@ -435,57 +435,57 @@  debian-bookworm-gcc-debug-arm64-randconfig:
     CONTAINER: debian:bookworm-arm64v8
     RANDCONFIG: y
 
-alpine-3.18-gcc-arm64:
+alpine-3.19-gcc-arm64:
   extends: .gcc-arm64-build
   variables:
-    CONTAINER: alpine:3.18-arm64v8
+    CONTAINER: alpine:3.19-arm64v8
 
-alpine-3.18-gcc-debug-arm64:
+alpine-3.19-gcc-debug-arm64:
   extends: .gcc-arm64-build-debug
   variables:
-    CONTAINER: alpine:3.18-arm64v8
+    CONTAINER: alpine:3.19-arm64v8
 
-alpine-3.18-gcc-arm64-randconfig:
+alpine-3.19-gcc-arm64-randconfig:
   extends: .gcc-arm64-build
   variables:
-    CONTAINER: alpine:3.18-arm64v8
+    CONTAINER: alpine:3.19-arm64v8
     RANDCONFIG: y
 
-alpine-3.18-gcc-debug-arm64-randconfig:
+alpine-3.19-gcc-debug-arm64-randconfig:
   extends: .gcc-arm64-build-debug
   variables:
-    CONTAINER: alpine:3.18-arm64v8
+    CONTAINER: alpine:3.19-arm64v8
     RANDCONFIG: y
 
-alpine-3.18-gcc-debug-arm64-staticmem:
+alpine-3.19-gcc-debug-arm64-staticmem:
   extends: .gcc-arm64-build-debug
   variables:
-    CONTAINER: alpine:3.18-arm64v8
+    CONTAINER: alpine:3.19-arm64v8
     EXTRA_XEN_CONFIG: |
       CONFIG_EXPERT=y
       CONFIG_UNSUPPORTED=y
       CONFIG_STATIC_MEMORY=y
 
-alpine-3.18-gcc-debug-arm64-static-shared-mem:
+alpine-3.19-gcc-debug-arm64-static-shared-mem:
   extends: .gcc-arm64-build-debug
   variables:
-    CONTAINER: alpine:3.18-arm64v8
+    CONTAINER: alpine:3.19-arm64v8
     EXTRA_XEN_CONFIG: |
       CONFIG_UNSUPPORTED=y
       CONFIG_STATIC_MEMORY=y
       CONFIG_STATIC_SHM=y
 
-alpine-3.18-gcc-debug-arm64-boot-cpupools:
+alpine-3.19-gcc-debug-arm64-boot-cpupools:
   extends: .gcc-arm64-build-debug
   variables:
-    CONTAINER: alpine:3.18-arm64v8
+    CONTAINER: alpine:3.19-arm64v8
     EXTRA_XEN_CONFIG: |
       CONFIG_BOOT_TIME_CPUPOOLS=y
 
-alpine-3.18-gcc-debug-arm64-earlyprintk:
+alpine-3.19-gcc-debug-arm64-earlyprintk:
   extends: .gcc-arm64-build-debug
   variables:
-    CONTAINER: alpine:3.18-arm64v8
+    CONTAINER: alpine:3.19-arm64v8
     EXTRA_XEN_CONFIG: |
       CONFIG_EARLY_UART_CHOICE_PL011=y
       CONFIG_EARLY_UART_BASE_ADDRESS=0x9000000
@@ -588,15 +588,15 @@  debian-bookworm-gcc-arm64-cppcheck:
 
 # Build jobs not needed for tests
 
-alpine-3.18-clang:
+alpine-3.19-clang:
   extends: .clang-x86-64-build
   variables:
-    CONTAINER: alpine:3.18
+    CONTAINER: alpine:3.19
 
-alpine-3.18-clang-debug:
+alpine-3.19-clang-debug:
   extends: .clang-x86-64-build-debug
   variables:
-    CONTAINER: alpine:3.18
+    CONTAINER: alpine:3.19
 
 archlinux-gcc:
   extends: .gcc-x86-64-build
diff --git a/automation/gitlab-ci/test.yaml b/automation/gitlab-ci/test.yaml
index ad249fa0a5d9..f62d426a8d34 100644
--- a/automation/gitlab-ci/test.yaml
+++ b/automation/gitlab-ci/test.yaml
@@ -3,7 +3,7 @@ 
   image: registry.gitlab.com/xen-project/xen/${CONTAINER}
 
 .arm64-test-needs: &arm64-test-needs
-  - alpine-3.18-arm64-rootfs-export
+  - alpine-3.19-arm64-rootfs-export
   - kernel-5.19-arm64-export
   - qemu-system-aarch64-6.0.0-arm64-export
 
@@ -11,7 +11,7 @@ 
   - qemu-system-aarch64-6.0.0-arm32-export
 
 .x86-64-test-needs: &x86-64-test-needs
-  - alpine-3.18-rootfs-export
+  - alpine-3.19-rootfs-export
   - kernel-6.1.19-export
 
 .qemu-arm64:
@@ -100,7 +100,7 @@ 
   extends: .test-jobs-common
   variables:
     # the test controller runs on RPi4
-    CONTAINER: alpine:3.18-arm64v8
+    CONTAINER: alpine:3.19-arm64v8
     LOGFILE: smoke-test.log
     PCIDEV: "03:00.0"
     PCIDEV_INTR: "MSI-X"
@@ -149,7 +149,7 @@  xilinx-smoke-dom0less-arm64-gcc:
     - ./automation/scripts/xilinx-smoke-dom0less-arm64.sh 2>&1 | tee ${LOGFILE}
   needs:
     - *arm64-test-needs
-    - alpine-3.18-gcc-arm64
+    - alpine-3.19-gcc-arm64
 
 xilinx-smoke-dom0less-arm64-gcc-gem-passthrough:
   extends: .xilinx-arm64
@@ -157,7 +157,7 @@  xilinx-smoke-dom0less-arm64-gcc-gem-passthrough:
     - ./automation/scripts/xilinx-smoke-dom0less-arm64.sh gem-passthrough 2>&1 | tee ${LOGFILE}
   needs:
     - *arm64-test-needs
-    - alpine-3.18-gcc-arm64
+    - alpine-3.19-gcc-arm64
 
 adl-smoke-x86-64-gcc-debug:
   extends: .adl-x86-64
@@ -165,7 +165,7 @@  adl-smoke-x86-64-gcc-debug:
     - ./automation/scripts/qubes-x86-64.sh 2>&1 | tee ${LOGFILE}
   needs:
     - *x86-64-test-needs
-    - alpine-3.18-gcc-debug
+    - alpine-3.19-gcc-debug
 
 adl-smoke-x86-64-dom0pvh-gcc-debug:
   extends: .adl-x86-64
@@ -173,7 +173,7 @@  adl-smoke-x86-64-dom0pvh-gcc-debug:
     - ./automation/scripts/qubes-x86-64.sh dom0pvh 2>&1 | tee ${LOGFILE}
   needs:
     - *x86-64-test-needs
-    - alpine-3.18-gcc-debug
+    - alpine-3.19-gcc-debug
 
 adl-suspend-x86-64-gcc-debug:
   extends: .adl-x86-64
@@ -181,7 +181,7 @@  adl-suspend-x86-64-gcc-debug:
     - ./automation/scripts/qubes-x86-64.sh s3 2>&1 | tee ${LOGFILE}
   needs:
     - *x86-64-test-needs
-    - alpine-3.18-gcc-debug
+    - alpine-3.19-gcc-debug
 
 adl-pci-pv-x86-64-gcc-debug:
   extends: .adl-x86-64
@@ -189,7 +189,7 @@  adl-pci-pv-x86-64-gcc-debug:
     - ./automation/scripts/qubes-x86-64.sh pci-pv 2>&1 | tee ${LOGFILE}
   needs:
     - *x86-64-test-needs
-    - alpine-3.18-gcc-debug
+    - alpine-3.19-gcc-debug
 
 adl-pci-hvm-x86-64-gcc-debug:
   extends: .adl-x86-64
@@ -197,7 +197,7 @@  adl-pci-hvm-x86-64-gcc-debug:
     - ./automation/scripts/qubes-x86-64.sh pci-hvm 2>&1 | tee ${LOGFILE}
   needs:
     - *x86-64-test-needs
-    - alpine-3.18-gcc-debug
+    - alpine-3.19-gcc-debug
 
 zen3p-smoke-x86-64-gcc-debug:
   extends: .zen3p-x86-64
@@ -205,7 +205,7 @@  zen3p-smoke-x86-64-gcc-debug:
     - ./automation/scripts/qubes-x86-64.sh 2>&1 | tee ${LOGFILE}
   needs:
     - *x86-64-test-needs
-    - alpine-3.18-gcc-debug
+    - alpine-3.19-gcc-debug
 
 zen3p-smoke-x86-64-dom0pvh-gcc-debug:
   extends: .zen3p-x86-64
@@ -213,7 +213,7 @@  zen3p-smoke-x86-64-dom0pvh-gcc-debug:
     - ./automation/scripts/qubes-x86-64.sh dom0pvh 2>&1 | tee ${LOGFILE}
   needs:
     - *x86-64-test-needs
-    - alpine-3.18-gcc-debug
+    - alpine-3.19-gcc-debug
 
 zen3p-pci-hvm-x86-64-gcc-debug:
   extends: .zen3p-x86-64
@@ -221,7 +221,7 @@  zen3p-pci-hvm-x86-64-gcc-debug:
     - ./automation/scripts/qubes-x86-64.sh pci-hvm 2>&1 | tee ${LOGFILE}
   needs:
     - *x86-64-test-needs
-    - alpine-3.18-gcc-debug
+    - alpine-3.19-gcc-debug
 
 qemu-smoke-dom0-arm64-gcc:
   extends: .qemu-arm64
@@ -229,7 +229,7 @@  qemu-smoke-dom0-arm64-gcc:
     - ./automation/scripts/qemu-smoke-dom0-arm64.sh 2>&1 | tee ${LOGFILE}
   needs:
     - *arm64-test-needs
-    - alpine-3.18-gcc-arm64
+    - alpine-3.19-gcc-arm64
 
 qemu-smoke-dom0-arm64-gcc-debug:
   extends: .qemu-arm64
@@ -237,7 +237,7 @@  qemu-smoke-dom0-arm64-gcc-debug:
     - ./automation/scripts/qemu-smoke-dom0-arm64.sh 2>&1 | tee ${LOGFILE}
   needs:
     - *arm64-test-needs
-    - alpine-3.18-gcc-debug-arm64
+    - alpine-3.19-gcc-debug-arm64
 
 qemu-smoke-dom0less-arm64-gcc:
   extends: .qemu-arm64
@@ -245,7 +245,7 @@  qemu-smoke-dom0less-arm64-gcc:
     - ./automation/scripts/qemu-smoke-dom0less-arm64.sh 2>&1 | tee ${LOGFILE}
   needs:
     - *arm64-test-needs
-    - alpine-3.18-gcc-arm64
+    - alpine-3.19-gcc-arm64
 
 qemu-smoke-dom0less-arm64-gcc-debug:
   extends: .qemu-arm64
@@ -253,7 +253,7 @@  qemu-smoke-dom0less-arm64-gcc-debug:
     - ./automation/scripts/qemu-smoke-dom0less-arm64.sh 2>&1 | tee ${LOGFILE}
   needs:
     - *arm64-test-needs
-    - alpine-3.18-gcc-debug-arm64
+    - alpine-3.19-gcc-debug-arm64
 
 qemu-smoke-dom0less-arm64-gcc-debug-gicv3:
   extends: .qemu-arm64
@@ -261,7 +261,7 @@  qemu-smoke-dom0less-arm64-gcc-debug-gicv3:
     - ./automation/scripts/qemu-smoke-dom0less-arm64.sh gicv3 2>&1 | tee ${LOGFILE}
   needs:
     - *arm64-test-needs
-    - alpine-3.18-gcc-debug-arm64
+    - alpine-3.19-gcc-debug-arm64
 
 qemu-smoke-dom0less-arm64-gcc-debug-staticmem:
   extends: .qemu-arm64
@@ -269,7 +269,7 @@  qemu-smoke-dom0less-arm64-gcc-debug-staticmem:
     - ./automation/scripts/qemu-smoke-dom0less-arm64.sh static-mem 2>&1 | tee ${LOGFILE}
   needs:
     - *arm64-test-needs
-    - alpine-3.18-gcc-debug-arm64-staticmem
+    - alpine-3.19-gcc-debug-arm64-staticmem
 
 qemu-smoke-dom0less-arm64-gcc-debug-staticheap:
  extends: .qemu-arm64
@@ -277,7 +277,7 @@  qemu-smoke-dom0less-arm64-gcc-debug-staticheap:
    - ./automation/scripts/qemu-smoke-dom0less-arm64.sh static-heap 2>&1 | tee ${LOGFILE}
  needs:
    - *arm64-test-needs
-   - alpine-3.18-gcc-debug-arm64
+   - alpine-3.19-gcc-debug-arm64
 
 qemu-smoke-dom0less-arm64-gcc-debug-static-shared-mem:
   extends: .qemu-arm64
@@ -285,7 +285,7 @@  qemu-smoke-dom0less-arm64-gcc-debug-static-shared-mem:
     - ./automation/scripts/qemu-smoke-dom0less-arm64.sh static-shared-mem 2>&1 | tee ${LOGFILE}
   needs:
     - *arm64-test-needs
-    - alpine-3.18-gcc-debug-arm64-static-shared-mem
+    - alpine-3.19-gcc-debug-arm64-static-shared-mem
 
 qemu-smoke-dom0less-arm64-gcc-debug-boot-cpupools:
   extends: .qemu-arm64
@@ -293,7 +293,7 @@  qemu-smoke-dom0less-arm64-gcc-debug-boot-cpupools:
     - ./automation/scripts/qemu-smoke-dom0less-arm64.sh boot-cpupools 2>&1 | tee ${LOGFILE}
   needs:
     - *arm64-test-needs
-    - alpine-3.18-gcc-debug-arm64-boot-cpupools
+    - alpine-3.19-gcc-debug-arm64-boot-cpupools
 
 qemu-smoke-dom0less-arm64-gcc-debug-earlyprintk:
   extends: .qemu-arm64
@@ -301,14 +301,14 @@  qemu-smoke-dom0less-arm64-gcc-debug-earlyprintk:
     - ./automation/scripts/qemu-smoke-dom0less-arm64.sh earlyprintk 2>&1 | tee ${LOGFILE}
   needs:
     - *arm64-test-needs
-    - alpine-3.18-gcc-debug-arm64-earlyprintk
+    - alpine-3.19-gcc-debug-arm64-earlyprintk
 
 qemu-xtf-dom0less-arm64-gcc-hyp-xen-version:
   extends: .qemu-arm64
   script:
     - ./automation/scripts/qemu-xtf-dom0less-arm64.sh hyp-xen-version 2>&1 | tee ${LOGFILE}
   needs:
-    - alpine-3.18-gcc-arm64
+    - alpine-3.19-gcc-arm64
     - qemu-system-aarch64-6.0.0-arm64-export
 
 qemu-xtf-dom0less-arm64-gcc-debug-hyp-xen-version:
@@ -316,7 +316,7 @@  qemu-xtf-dom0less-arm64-gcc-debug-hyp-xen-version:
   script:
     - ./automation/scripts/qemu-xtf-dom0less-arm64.sh hyp-xen-version 2>&1 | tee ${LOGFILE}
   needs:
-    - alpine-3.18-gcc-debug-arm64
+    - alpine-3.19-gcc-debug-arm64
     - qemu-system-aarch64-6.0.0-arm64-export
 
 qemu-smoke-dom0-arm32-gcc:
@@ -389,7 +389,7 @@  qemu-alpine-x86_64-gcc:
     - ./automation/scripts/qemu-alpine-x86_64.sh 2>&1 | tee ${LOGFILE}
   needs:
     - *x86-64-test-needs
-    - alpine-3.18-gcc
+    - alpine-3.19-gcc
 
 qemu-smoke-x86-64-gcc:
   extends: .qemu-x86-64
diff --git a/automation/scripts/containerize b/automation/scripts/containerize
index acdef1b54813..ae82e727b0b6 100755
--- a/automation/scripts/containerize
+++ b/automation/scripts/containerize
@@ -24,8 +24,8 @@  die() {
 #
 BASE="registry.gitlab.com/xen-project/xen"
 case "_${CONTAINER}" in
-    _alpine) CONTAINER="${BASE}/alpine:3.18" ;;
-    _alpine-arm64v8) CONTAINER="${BASE}/alpine:3.18-arm64v8" ;;
+    _alpine) CONTAINER="${BASE}/alpine:3.19" ;;
+    _alpine-arm64v8) CONTAINER="${BASE}/alpine:3.19-arm64v8" ;;
     _archlinux|_arch) CONTAINER="${BASE}/archlinux:current" ;;
     _riscv64) CONTAINER="${BASE}/archlinux:current-riscv64" ;;
     _centos7) CONTAINER="${BASE}/centos:7" ;;
diff --git a/automation/tests-artifacts/alpine/3.18-arm64v8.dockerfile b/automation/tests-artifacts/alpine/3.18-arm64v8.dockerfile
deleted file mode 100644
index 0e5ae7f2b4d8..000000000000
--- a/automation/tests-artifacts/alpine/3.18-arm64v8.dockerfile
+++ /dev/null
@@ -1,65 +0,0 @@ 
-FROM --platform=linux/arm64/v8 alpine:3.18
-LABEL maintainer.name="The Xen Project" \
-      maintainer.email="xen-devel@lists.xenproject.org"
-
-ENV USER root
-
-RUN mkdir /build
-WORKDIR /build
-
-RUN \
-  # apk
-  apk update && \
-  \
-  # xen runtime deps
-  apk add musl && \
-  apk add openrc && \
-  apk add busybox && \
-  apk add sudo && \
-  apk add dbus && \
-  apk add bash && \
-  apk add python3 && \
-  apk add zlib && \
-  apk add ncurses && \
-  apk add yajl && \
-  apk add libaio && \
-  apk add xz && \
-  apk add util-linux && \
-  apk add argp-standalone && \
-  apk add libfdt && \
-  apk add glib && \
-  apk add pixman && \
-  apk add curl && \
-  apk add udev && \
-  \
-  # Xen
-  cd / && \
-  # Minimal ramdisk environment in case of cpio output
-  rc-update add udev && \
-  rc-update add udev-trigger && \
-  rc-update add udev-settle && \
-  rc-update add networking sysinit && \
-  rc-update add loopback sysinit && \
-  rc-update add bootmisc boot && \
-  rc-update add devfs sysinit && \
-  rc-update add dmesg sysinit && \
-  rc-update add hostname boot && \
-  rc-update add hwclock boot && \
-  rc-update add hwdrivers sysinit && \
-  rc-update add killprocs shutdown && \
-  rc-update add modloop sysinit && \
-  rc-update add modules boot && \
-  rc-update add mount-ro shutdown && \
-  rc-update add savecache shutdown && \
-  rc-update add sysctl boot && \
-  rc-update add local default && \
-  cp -a /sbin/init /init && \
-  echo "ttyS0" >> /etc/securetty && \
-  echo "hvc0" >> /etc/securetty && \
-  echo "ttyS0::respawn:/sbin/getty -L ttyS0 115200 vt100" >> /etc/inittab && \
-  echo "hvc0::respawn:/sbin/getty -L hvc0 115200 vt100" >> /etc/inittab && \
-  passwd -d "root" root && \
-  \
-  # Create rootfs
-  cd / && \
-  tar cvzf /initrd.tar.gz bin dev etc home init lib mnt opt root sbin usr var
diff --git a/automation/tests-artifacts/alpine/3.18.dockerfile b/automation/tests-artifacts/alpine/3.18.dockerfile
deleted file mode 100644
index 9cde6c9ad4da..000000000000
--- a/automation/tests-artifacts/alpine/3.18.dockerfile
+++ /dev/null
@@ -1,66 +0,0 @@ 
-FROM --platform=linux/amd64 alpine:3.18
-LABEL maintainer.name="The Xen Project" \
-      maintainer.email="xen-devel@lists.xenproject.org"
-
-ENV USER root
-
-RUN mkdir /build
-WORKDIR /build
-
-RUN \
-  # apk
-  apk update && \
-  \
-  # xen runtime deps
-  apk add musl && \
-  apk add libgcc && \
-  apk add openrc && \
-  apk add busybox && \
-  apk add sudo && \
-  apk add dbus && \
-  apk add bash && \
-  apk add python3 && \
-  apk add zlib && \
-  apk add ncurses && \
-  apk add yajl && \
-  apk add libaio && \
-  apk add xz && \
-  apk add util-linux && \
-  apk add argp-standalone && \
-  apk add libfdt && \
-  apk add glib && \
-  apk add pixman && \
-  apk add curl && \
-  apk add udev && \
-  apk add pciutils && \
-  apk add libelf && \
-  \
-  # Xen
-  cd / && \
-  # Minimal ramdisk environment in case of cpio output
-  rc-update add udev && \
-  rc-update add udev-trigger && \
-  rc-update add udev-settle && \
-  rc-update add loopback sysinit && \
-  rc-update add bootmisc boot && \
-  rc-update add devfs sysinit && \
-  rc-update add dmesg sysinit && \
-  rc-update add hostname boot && \
-  rc-update add hwclock boot && \
-  rc-update add hwdrivers sysinit && \
-  rc-update add modules boot && \
-  rc-update add killprocs shutdown && \
-  rc-update add mount-ro shutdown && \
-  rc-update add savecache shutdown && \
-  rc-update add local default && \
-  cp -a /sbin/init /init && \
-  echo "ttyS0" >> /etc/securetty && \
-  echo "hvc0" >> /etc/securetty && \
-  echo "ttyS0::respawn:/sbin/getty -L ttyS0 115200 vt100" >> /etc/inittab && \
-  echo "hvc0::respawn:/sbin/getty -L hvc0 115200 vt100" >> /etc/inittab && \
-  echo > /etc/modules && \
-  passwd -d "root" root && \
-  \
-  # Create rootfs
-  cd / && \
-  tar cvzf /initrd.tar.gz bin dev etc home init lib mnt opt root sbin usr var
diff --git a/automation/tests-artifacts/alpine/3.19-arm64v8.dockerfile b/automation/tests-artifacts/alpine/3.19-arm64v8.dockerfile
new file mode 100644
index 000000000000..68a5831bca72
--- /dev/null
+++ b/automation/tests-artifacts/alpine/3.19-arm64v8.dockerfile
@@ -0,0 +1,65 @@ 
+FROM --platform=linux/arm64/v8 alpine:3.19
+LABEL maintainer.name="The Xen Project" \
+      maintainer.email="xen-devel@lists.xenproject.org"
+
+ENV USER root
+
+RUN mkdir /build
+WORKDIR /build
+
+RUN \
+  # apk
+  apk update && \
+  \
+  # xen runtime deps
+  apk add musl && \
+  apk add openrc && \
+  apk add busybox && \
+  apk add sudo && \
+  apk add dbus && \
+  apk add bash && \
+  apk add python3 && \
+  apk add zlib && \
+  apk add ncurses && \
+  apk add yajl && \
+  apk add libaio && \
+  apk add xz && \
+  apk add util-linux && \
+  apk add argp-standalone && \
+  apk add libfdt && \
+  apk add glib && \
+  apk add pixman && \
+  apk add curl && \
+  apk add udev && \
+  \
+  # Xen
+  cd / && \
+  # Minimal ramdisk environment in case of cpio output
+  rc-update add udev && \
+  rc-update add udev-trigger && \
+  rc-update add udev-settle && \
+  rc-update add networking sysinit && \
+  rc-update add loopback sysinit && \
+  rc-update add bootmisc boot && \
+  rc-update add devfs sysinit && \
+  rc-update add dmesg sysinit && \
+  rc-update add hostname boot && \
+  rc-update add hwclock boot && \
+  rc-update add hwdrivers sysinit && \
+  rc-update add killprocs shutdown && \
+  rc-update add modloop sysinit && \
+  rc-update add modules boot && \
+  rc-update add mount-ro shutdown && \
+  rc-update add savecache shutdown && \
+  rc-update add sysctl boot && \
+  rc-update add local default && \
+  cp -a /sbin/init /init && \
+  echo "ttyS0" >> /etc/securetty && \
+  echo "hvc0" >> /etc/securetty && \
+  echo "ttyS0::respawn:/sbin/getty -L ttyS0 115200 vt100" >> /etc/inittab && \
+  echo "hvc0::respawn:/sbin/getty -L hvc0 115200 vt100" >> /etc/inittab && \
+  passwd -d "root" root && \
+  \
+  # Create rootfs
+  cd / && \
+  tar cvzf /initrd.tar.gz bin dev etc home init lib mnt opt root sbin usr var
diff --git a/automation/tests-artifacts/alpine/3.19.dockerfile b/automation/tests-artifacts/alpine/3.19.dockerfile
new file mode 100644
index 000000000000..6d665daedfa4
--- /dev/null
+++ b/automation/tests-artifacts/alpine/3.19.dockerfile
@@ -0,0 +1,67 @@ 
+FROM --platform=linux/amd64 alpine:3.19
+LABEL maintainer.name="The Xen Project" \
+      maintainer.email="xen-devel@lists.xenproject.org"
+
+ENV USER root
+
+RUN mkdir /build
+WORKDIR /build
+
+RUN \
+  # apk
+  apk update && \
+  \
+  # xen runtime deps
+  apk add musl && \
+  apk add libgcc && \
+  apk add openrc && \
+  apk add busybox && \
+  apk add sudo && \
+  apk add dbus && \
+  apk add bash && \
+  apk add python3 && \
+  apk add zlib && \
+  apk add ncurses && \
+  apk add yajl && \
+  apk add libaio && \
+  apk add xz && \
+  apk add util-linux && \
+  apk add argp-standalone && \
+  apk add libfdt && \
+  apk add glib && \
+  apk add pixman && \
+  apk add curl && \
+  apk add udev && \
+  apk add pciutils && \
+  apk add libelf && \
+  apk add libdw && \
+  \
+  # Xen
+  cd / && \
+  # Minimal ramdisk environment in case of cpio output
+  rc-update add udev && \
+  rc-update add udev-trigger && \
+  rc-update add udev-settle && \
+  rc-update add loopback sysinit && \
+  rc-update add bootmisc boot && \
+  rc-update add devfs sysinit && \
+  rc-update add dmesg sysinit && \
+  rc-update add hostname boot && \
+  rc-update add hwclock boot && \
+  rc-update add hwdrivers sysinit && \
+  rc-update add modules boot && \
+  rc-update add killprocs shutdown && \
+  rc-update add mount-ro shutdown && \
+  rc-update add savecache shutdown && \
+  rc-update add local default && \
+  cp -a /sbin/init /init && \
+  echo "ttyS0" >> /etc/securetty && \
+  echo "hvc0" >> /etc/securetty && \
+  echo "ttyS0::respawn:/sbin/getty -L ttyS0 115200 vt100" >> /etc/inittab && \
+  echo "hvc0::respawn:/sbin/getty -L hvc0 115200 vt100" >> /etc/inittab && \
+  echo > /etc/modules && \
+  passwd -d "root" root && \
+  \
+  # Create rootfs
+  cd / && \
+  tar cvzf /initrd.tar.gz bin dev etc home init lib mnt opt root sbin usr var