| Message ID | b1b4a21fe9a600b1322742dda55a40e9961daa57.1674346505.git.brchuckz@aol.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v11] xen/pt: reserve PCI slot 2 for Intel igd-passthru | expand |
On Sat, Jan 21, 2023 at 07:57:02PM -0500, Chuck Zmudzinski wrote: > Intel specifies that the Intel IGD must occupy slot 2 on the PCI bus, > as noted in docs/igd-assign.txt in the Qemu source code. > > Currently, when the xl toolstack is used to configure a Xen HVM guest with > Intel IGD passthrough to the guest with the Qemu upstream device model, > a Qemu emulated PCI device will occupy slot 2 and the Intel IGD will occupy > a different slot. This problem often prevents the guest from booting. > > The only available workarounds are not good: Configure Xen HVM guests to > use the old and no longer maintained Qemu traditional device model > available from xenbits.xen.org which does reserve slot 2 for the Intel > IGD or use the "pc" machine type instead of the "xenfv" machine type and > add the xen platform device at slot 3 using a command line option > instead of patching qemu to fix the "xenfv" machine type directly. The > second workaround causes some degredation in startup performance such as > a longer boot time and reduced resolution of the grub menu that is > displayed on the monitor. This patch avoids that reduced startup > performance when using the Qemu upstream device model for Xen HVM guests > configured with the igd-passthru=on option. > > To implement this feature in the Qemu upstream device model for Xen HVM > guests, introduce the following new functions, types, and macros: > > * XEN_PT_DEVICE_CLASS declaration, based on the existing TYPE_XEN_PT_DEVICE > * XEN_PT_DEVICE_GET_CLASS macro helper function for XEN_PT_DEVICE_CLASS > * typedef XenPTQdevRealize function pointer > * XEN_PCI_IGD_SLOT_MASK, the value of slot_reserved_mask to reserve slot 2 > * xen_igd_reserve_slot and xen_igd_clear_slot functions > > Michael Tsirkin: > * Introduce XEN_PCI_IGD_DOMAIN, XEN_PCI_IGD_BUS, XEN_PCI_IGD_DEV, and > XEN_PCI_IGD_FN - use them to compute the value of XEN_PCI_IGD_SLOT_MASK > > The new xen_igd_reserve_slot function uses the existing slot_reserved_mask > member of PCIBus to reserve PCI slot 2 for Xen HVM guests configured using > the xl toolstack with the gfx_passthru option enabled, which sets the > igd-passthru=on option to Qemu for the Xen HVM machine type. > > The new xen_igd_reserve_slot function also needs to be implemented in > hw/xen/xen_pt_stub.c to prevent FTBFS during the link stage for the case > when Qemu is configured with --enable-xen and --disable-xen-pci-passthrough, > in which case it does nothing. > > The new xen_igd_clear_slot function overrides qdev->realize of the parent > PCI device class to enable the Intel IGD to occupy slot 2 on the PCI bus > since slot 2 was reserved by xen_igd_reserve_slot when the PCI bus was > created in hw/i386/pc_piix.c for the case when igd-passthru=on. > > Move the call to xen_host_pci_device_get, and the associated error > handling, from xen_pt_realize to the new xen_igd_clear_slot function to > initialize the device class and vendor values which enables the checks for > the Intel IGD to succeed. The verification that the host device is an > Intel IGD to be passed through is done by checking the domain, bus, slot, > and function values as well as by checking that gfx_passthru is enabled, > the device class is VGA, and the device vendor in Intel. > > Signed-off-by: Chuck Zmudzinski <brchuckz@aol.com> > --- > Notes that might be helpful to reviewers of patched code in hw/xen: > > The new functions and types are based on recommendations from Qemu docs: > https://qemu.readthedocs.io/en/latest/devel/qom.html > > Notes that might be helpful to reviewers of patched code in hw/i386: > > The small patch to hw/i386/pc_piix.c is protected by CONFIG_XEN so it does > not affect builds that do not have CONFIG_XEN defined. > > xen_igd_gfx_pt_enabled() in the patched hw/i386/pc_piix.c file is an > existing function that is only true when Qemu is built with > xen-pci-passthrough enabled and the administrator has configured the Xen > HVM guest with Qemu's igd-passthru=on option. > > v2: Remove From: <email address> tag at top of commit message > > v3: Changed the test for the Intel IGD in xen_igd_clear_slot: > > if (is_igd_vga_passthrough(&s->real_device) && > (s->real_device.vendor_id == PCI_VENDOR_ID_INTEL)) { > > is changed to > > if (xen_igd_gfx_pt_enabled() && (s->hostaddr.slot == 2) > && (s->hostaddr.function == 0)) { > > I hoped that I could use the test in v2, since it matches the > other tests for the Intel IGD in Qemu and Xen, but those tests > do not work because the necessary data structures are not set with > their values yet. So instead use the test that the administrator > has enabled gfx_passthru and the device address on the host is > 02.0. This test does detect the Intel IGD correctly. > > v4: Use brchuckz@aol.com instead of brchuckz@netscape.net for the author's > email address to match the address used by the same author in commits > be9c61da and c0e86b76 > > Change variable for XEN_PT_DEVICE_CLASS: xptc changed to xpdc > > v5: The patch of xen_pt.c was re-worked to allow a more consistent test > for the Intel IGD that uses the same criteria as in other places. > This involved moving the call to xen_host_pci_device_get from > xen_pt_realize to xen_igd_clear_slot and updating the checks for the > Intel IGD in xen_igd_clear_slot: > > if (xen_igd_gfx_pt_enabled() && (s->hostaddr.slot == 2) > && (s->hostaddr.function == 0)) { > > is changed to > > if (is_igd_vga_passthrough(&s->real_device) && > s->real_device.domain == 0 && s->real_device.bus == 0 && > s->real_device.dev == 2 && s->real_device.func == 0 && > s->real_device.vendor_id == PCI_VENDOR_ID_INTEL) { > > Added an explanation for the move of xen_host_pci_device_get from > xen_pt_realize to xen_igd_clear_slot to the commit message. > > Rebase. > > v6: Fix logging by removing these lines from the move from xen_pt_realize > to xen_igd_clear_slot that was done in v5: > > XEN_PT_LOG(d, "Assigning real physical device %02x:%02x.%d" > " to devfn 0x%x\n", > s->hostaddr.bus, s->hostaddr.slot, s->hostaddr.function, > s->dev.devfn); > > This log needs to be in xen_pt_realize because s->dev.devfn is not > set yet in xen_igd_clear_slot. > > v7: The v7 that was posted to the mailing list was incorrect. v8 is what > v7 was intended to be. > > v8: Inhibit out of context log message and needless processing by > adding 2 lines at the top of the new xen_igd_clear_slot function: > > if (!(pci_bus->slot_reserved_mask & XEN_PCI_IGD_SLOT_MASK)) > return; > > Rebase. This removed an unnecessary header file from xen_pt.h > > v9: Move check for xen_igd_gfx_pt_enabled() from pc_piix.c to xen_pt.c > > Move #include "hw/pci/pci_bus.h" from xen_pt.h to xen_pt.c > > Introduce macros for the IGD devfn constants and use them to compute > the value of XEN_PCI_IGD_SLOT_MASK > > Also use the new macros at an appropriate place in xen_pt_realize > > Add Cc: to stable - This has been broken for a long time, ever since > support for igd-passthru was added to Qemu 7 > years ago. > > Mention new macros in the commit message (Michael Tsirkin) > > N.B.: I could not follow the suggestion to move the statement > pci_bus->slot_reserved_mask &= ~XEN_PCI_IGD_SLOT_MASK; to after > pci_qdev_realize for symmetry. Doing that results in an error when > creating the guest: > > libxl: error: libxl_qmp.c:1837:qmp_ev_parse_error_messages: Domain 4:PCI: slot 2 function 0 not available for xen-pci-passthrough, reserved > libxl: error: libxl_pci.c:1809:device_pci_add_done: Domain 4:libxl__device_pci_add failed for PCI device 0:0:2.0 (rc -28) > libxl: error: libxl_create.c:1921:domcreate_attach_devices: Domain 4:unable to add pci devices > > v10: Change in xen_pt.c at xen_igd_clear_slot from > > if (!(pci_bus->slot_reserved_mask & XEN_PCI_IGD_SLOT_MASK)) > return; > > xen_host_pci_device_get(&s->real_device, > s->hostaddr.domain, s->hostaddr.bus, > s->hostaddr.slot, s->hostaddr.function, > errp); > if (*errp) { > error_append_hint(errp, "Failed to \"open\" the real pci device"); > return; > } > > to: > > xen_host_pci_device_get(&s->real_device, > s->hostaddr.domain, s->hostaddr.bus, > s->hostaddr.slot, s->hostaddr.function, > errp); > if (*errp) { > error_append_hint(errp, "Failed to \"open\" the real pci device"); > return; > } > > if (!(pci_bus->slot_reserved_mask & XEN_PCI_IGD_SLOT_MASK)) { > xpdc->pci_qdev_realize(qdev, errp); > return; > } > > Testing shows this fixes the problem of xen_host_pci_device_get > and xpdc->pci_qdev_realize not being called if xen_igd_clear_slot > returns because the bit to reserve slot 2 in slot_reserved_mask is > not set. Without this change, guest creation fails in the cases > when the bit to reserve slot 2 in slot_reserved_mask is not set. > Thanks, Stefano! > > Also, in addition to mentioning the workaround of using the > traditional qemu device model available from xenbits.xen.org in the > commit message, also mention in the commit message the workaround > of using the "pc" machine type instead of the "xenfv" machine type, > which results in reduced startup performance. > > Rebase. > > Add Igor Mammedov <imammedo@redhat.com> to Cc. > > v11: I noticed a style mistake that has been present in the past few > versions that no one noticed. This version fixes it. No > functional change in v11. I also did more tests on different guests > such as guests that don't have igd-passthru=on set. No regressions > were observed. > > The style mistake (missing braces) is fixed as follows: > > xen_pt.c at xen_igd_reserve_slot is changed from > > if (!xen_igd_gfx_pt_enabled()) > return; > > to > > if (!xen_igd_gfx_pt_enabled()) { > return; > } > > hw/i386/pc_piix.c | 1 + > hw/xen/xen_pt.c | 64 ++++++++++++++++++++++++++++++++++++-------- > hw/xen/xen_pt.h | 20 ++++++++++++++ > hw/xen/xen_pt_stub.c | 4 +++ > 4 files changed, 78 insertions(+), 11 deletions(-) For the 1-liner in PC: Reviewed-by: Michael S. Tsirkin <mst@redhat.com> but I really leave this up to Xen maintainers to decide whether the patch is needed and makes sense. > diff --git a/hw/i386/pc_piix.c b/hw/i386/pc_piix.c > index df64dd8dcc..a9d535c815 100644 > --- a/hw/i386/pc_piix.c > +++ b/hw/i386/pc_piix.c > @@ -421,6 +421,7 @@ static void pc_xen_hvm_init(MachineState *machine) > } > > pc_xen_hvm_init_pci(machine); > + xen_igd_reserve_slot(pcms->bus); > pci_create_simple(pcms->bus, -1, "xen-platform"); > } > #endif > diff --git a/hw/xen/xen_pt.c b/hw/xen/xen_pt.c > index 8db0532632..85c93cffcf 100644 > --- a/hw/xen/xen_pt.c > +++ b/hw/xen/xen_pt.c > @@ -57,6 +57,7 @@ > #include <sys/ioctl.h> > > #include "hw/pci/pci.h" > +#include "hw/pci/pci_bus.h" > #include "hw/qdev-properties.h" > #include "hw/qdev-properties-system.h" > #include "hw/xen/xen.h" > @@ -780,15 +781,6 @@ static void xen_pt_realize(PCIDevice *d, Error **errp) > s->hostaddr.bus, s->hostaddr.slot, s->hostaddr.function, > s->dev.devfn); > > - xen_host_pci_device_get(&s->real_device, > - s->hostaddr.domain, s->hostaddr.bus, > - s->hostaddr.slot, s->hostaddr.function, > - errp); > - if (*errp) { > - error_append_hint(errp, "Failed to \"open\" the real pci device"); > - return; > - } > - > s->is_virtfn = s->real_device.is_virtfn; > if (s->is_virtfn) { > XEN_PT_LOG(d, "%04x:%02x:%02x.%d is a SR-IOV Virtual Function\n", > @@ -803,8 +795,10 @@ static void xen_pt_realize(PCIDevice *d, Error **errp) > s->io_listener = xen_pt_io_listener; > > /* Setup VGA bios for passthrough GFX */ > - if ((s->real_device.domain == 0) && (s->real_device.bus == 0) && > - (s->real_device.dev == 2) && (s->real_device.func == 0)) { > + if ((s->real_device.domain == XEN_PCI_IGD_DOMAIN) && > + (s->real_device.bus == XEN_PCI_IGD_BUS) && > + (s->real_device.dev == XEN_PCI_IGD_DEV) && > + (s->real_device.func == XEN_PCI_IGD_FN)) { > if (!is_igd_vga_passthrough(&s->real_device)) { > error_setg(errp, "Need to enable igd-passthru if you're trying" > " to passthrough IGD GFX"); > @@ -950,11 +944,58 @@ static void xen_pci_passthrough_instance_init(Object *obj) > PCI_DEVICE(obj)->cap_present |= QEMU_PCI_CAP_EXPRESS; > } > > +void xen_igd_reserve_slot(PCIBus *pci_bus) > +{ > + if (!xen_igd_gfx_pt_enabled()) { > + return; > + } > + > + XEN_PT_LOG(0, "Reserving PCI slot 2 for IGD\n"); > + pci_bus->slot_reserved_mask |= XEN_PCI_IGD_SLOT_MASK; > +} > + > +static void xen_igd_clear_slot(DeviceState *qdev, Error **errp) > +{ > + ERRP_GUARD(); > + PCIDevice *pci_dev = (PCIDevice *)qdev; > + XenPCIPassthroughState *s = XEN_PT_DEVICE(pci_dev); > + XenPTDeviceClass *xpdc = XEN_PT_DEVICE_GET_CLASS(s); > + PCIBus *pci_bus = pci_get_bus(pci_dev); > + > + xen_host_pci_device_get(&s->real_device, > + s->hostaddr.domain, s->hostaddr.bus, > + s->hostaddr.slot, s->hostaddr.function, > + errp); > + if (*errp) { > + error_append_hint(errp, "Failed to \"open\" the real pci device"); > + return; > + } > + > + if (!(pci_bus->slot_reserved_mask & XEN_PCI_IGD_SLOT_MASK)) { > + xpdc->pci_qdev_realize(qdev, errp); > + return; > + } > + > + if (is_igd_vga_passthrough(&s->real_device) && > + s->real_device.domain == XEN_PCI_IGD_DOMAIN && > + s->real_device.bus == XEN_PCI_IGD_BUS && > + s->real_device.dev == XEN_PCI_IGD_DEV && > + s->real_device.func == XEN_PCI_IGD_FN && > + s->real_device.vendor_id == PCI_VENDOR_ID_INTEL) { > + pci_bus->slot_reserved_mask &= ~XEN_PCI_IGD_SLOT_MASK; > + XEN_PT_LOG(pci_dev, "Intel IGD found, using slot 2\n"); > + } > + xpdc->pci_qdev_realize(qdev, errp); > +} > + > static void xen_pci_passthrough_class_init(ObjectClass *klass, void *data) > { > DeviceClass *dc = DEVICE_CLASS(klass); > PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); > > + XenPTDeviceClass *xpdc = XEN_PT_DEVICE_CLASS(klass); > + xpdc->pci_qdev_realize = dc->realize; > + dc->realize = xen_igd_clear_slot; > k->realize = xen_pt_realize; > k->exit = xen_pt_unregister_device; > k->config_read = xen_pt_pci_read_config; > @@ -977,6 +1018,7 @@ static const TypeInfo xen_pci_passthrough_info = { > .instance_size = sizeof(XenPCIPassthroughState), > .instance_finalize = xen_pci_passthrough_finalize, > .class_init = xen_pci_passthrough_class_init, > + .class_size = sizeof(XenPTDeviceClass), > .instance_init = xen_pci_passthrough_instance_init, > .interfaces = (InterfaceInfo[]) { > { INTERFACE_CONVENTIONAL_PCI_DEVICE }, > diff --git a/hw/xen/xen_pt.h b/hw/xen/xen_pt.h > index cf10fc7bbf..e184699740 100644 > --- a/hw/xen/xen_pt.h > +++ b/hw/xen/xen_pt.h > @@ -40,7 +40,20 @@ typedef struct XenPTReg XenPTReg; > #define TYPE_XEN_PT_DEVICE "xen-pci-passthrough" > OBJECT_DECLARE_SIMPLE_TYPE(XenPCIPassthroughState, XEN_PT_DEVICE) > > +#define XEN_PT_DEVICE_CLASS(klass) \ > + OBJECT_CLASS_CHECK(XenPTDeviceClass, klass, TYPE_XEN_PT_DEVICE) > +#define XEN_PT_DEVICE_GET_CLASS(obj) \ > + OBJECT_GET_CLASS(XenPTDeviceClass, obj, TYPE_XEN_PT_DEVICE) > + > +typedef void (*XenPTQdevRealize)(DeviceState *qdev, Error **errp); > + > +typedef struct XenPTDeviceClass { > + PCIDeviceClass parent_class; > + XenPTQdevRealize pci_qdev_realize; > +} XenPTDeviceClass; > + > uint32_t igd_read_opregion(XenPCIPassthroughState *s); > +void xen_igd_reserve_slot(PCIBus *pci_bus); > void igd_write_opregion(XenPCIPassthroughState *s, uint32_t val); > void xen_igd_passthrough_isa_bridge_create(XenPCIPassthroughState *s, > XenHostPCIDevice *dev); > @@ -75,6 +88,13 @@ typedef int (*xen_pt_conf_byte_read) > > #define XEN_PCI_INTEL_OPREGION 0xfc > > +#define XEN_PCI_IGD_DOMAIN 0 > +#define XEN_PCI_IGD_BUS 0 > +#define XEN_PCI_IGD_DEV 2 > +#define XEN_PCI_IGD_FN 0 > +#define XEN_PCI_IGD_SLOT_MASK \ > + (1UL << PCI_SLOT(PCI_DEVFN(XEN_PCI_IGD_DEV, XEN_PCI_IGD_FN))) > + > typedef enum { > XEN_PT_GRP_TYPE_HARDWIRED = 0, /* 0 Hardwired reg group */ > XEN_PT_GRP_TYPE_EMU, /* emul reg group */ > diff --git a/hw/xen/xen_pt_stub.c b/hw/xen/xen_pt_stub.c > index 2d8cac8d54..5c108446a8 100644 > --- a/hw/xen/xen_pt_stub.c > +++ b/hw/xen/xen_pt_stub.c > @@ -20,3 +20,7 @@ void xen_igd_gfx_pt_set(bool value, Error **errp) > error_setg(errp, "Xen PCI passthrough support not built in"); > } > } > + > +void xen_igd_reserve_slot(PCIBus *pci_bus) > +{ > +} > -- > 2.39.0
On 1/22/23 3:40 AM, Michael S. Tsirkin wrote: > On Sat, Jan 21, 2023 at 07:57:02PM -0500, Chuck Zmudzinski wrote: >> Intel specifies that the Intel IGD must occupy slot 2 on the PCI bus, >> as noted in docs/igd-assign.txt in the Qemu source code. >> >> Currently, when the xl toolstack is used to configure a Xen HVM guest with >> Intel IGD passthrough to the guest with the Qemu upstream device model, >> a Qemu emulated PCI device will occupy slot 2 and the Intel IGD will occupy >> a different slot. This problem often prevents the guest from booting. >> >> The only available workarounds are not good: Configure Xen HVM guests to >> use the old and no longer maintained Qemu traditional device model >> available from xenbits.xen.org which does reserve slot 2 for the Intel >> IGD or use the "pc" machine type instead of the "xenfv" machine type and >> add the xen platform device at slot 3 using a command line option >> instead of patching qemu to fix the "xenfv" machine type directly. The >> second workaround causes some degredation in startup performance such as >> a longer boot time and reduced resolution of the grub menu that is >> displayed on the monitor. This patch avoids that reduced startup >> performance when using the Qemu upstream device model for Xen HVM guests >> configured with the igd-passthru=on option. >> >> To implement this feature in the Qemu upstream device model for Xen HVM >> guests, introduce the following new functions, types, and macros: >> >> * XEN_PT_DEVICE_CLASS declaration, based on the existing TYPE_XEN_PT_DEVICE >> * XEN_PT_DEVICE_GET_CLASS macro helper function for XEN_PT_DEVICE_CLASS >> * typedef XenPTQdevRealize function pointer >> * XEN_PCI_IGD_SLOT_MASK, the value of slot_reserved_mask to reserve slot 2 >> * xen_igd_reserve_slot and xen_igd_clear_slot functions >> >> Michael Tsirkin: >> * Introduce XEN_PCI_IGD_DOMAIN, XEN_PCI_IGD_BUS, XEN_PCI_IGD_DEV, and >> XEN_PCI_IGD_FN - use them to compute the value of XEN_PCI_IGD_SLOT_MASK >> >> The new xen_igd_reserve_slot function uses the existing slot_reserved_mask >> member of PCIBus to reserve PCI slot 2 for Xen HVM guests configured using >> the xl toolstack with the gfx_passthru option enabled, which sets the >> igd-passthru=on option to Qemu for the Xen HVM machine type. >> >> The new xen_igd_reserve_slot function also needs to be implemented in >> hw/xen/xen_pt_stub.c to prevent FTBFS during the link stage for the case >> when Qemu is configured with --enable-xen and --disable-xen-pci-passthrough, >> in which case it does nothing. >> >> The new xen_igd_clear_slot function overrides qdev->realize of the parent >> PCI device class to enable the Intel IGD to occupy slot 2 on the PCI bus >> since slot 2 was reserved by xen_igd_reserve_slot when the PCI bus was >> created in hw/i386/pc_piix.c for the case when igd-passthru=on. >> >> Move the call to xen_host_pci_device_get, and the associated error >> handling, from xen_pt_realize to the new xen_igd_clear_slot function to >> initialize the device class and vendor values which enables the checks for >> the Intel IGD to succeed. The verification that the host device is an >> Intel IGD to be passed through is done by checking the domain, bus, slot, >> and function values as well as by checking that gfx_passthru is enabled, >> the device class is VGA, and the device vendor in Intel. >> >> Signed-off-by: Chuck Zmudzinski <brchuckz@aol.com> >> --- >> Notes that might be helpful to reviewers of patched code in hw/xen: >> >> The new functions and types are based on recommendations from Qemu docs: >> https://qemu.readthedocs.io/en/latest/devel/qom.html >> >> Notes that might be helpful to reviewers of patched code in hw/i386: >> >> The small patch to hw/i386/pc_piix.c is protected by CONFIG_XEN so it does >> not affect builds that do not have CONFIG_XEN defined. >> >> xen_igd_gfx_pt_enabled() in the patched hw/i386/pc_piix.c file is an >> existing function that is only true when Qemu is built with >> xen-pci-passthrough enabled and the administrator has configured the Xen >> HVM guest with Qemu's igd-passthru=on option. >> >> v2: Remove From: <email address> tag at top of commit message >> >> v3: Changed the test for the Intel IGD in xen_igd_clear_slot: >> >> if (is_igd_vga_passthrough(&s->real_device) && >> (s->real_device.vendor_id == PCI_VENDOR_ID_INTEL)) { >> >> is changed to >> >> if (xen_igd_gfx_pt_enabled() && (s->hostaddr.slot == 2) >> && (s->hostaddr.function == 0)) { >> >> I hoped that I could use the test in v2, since it matches the >> other tests for the Intel IGD in Qemu and Xen, but those tests >> do not work because the necessary data structures are not set with >> their values yet. So instead use the test that the administrator >> has enabled gfx_passthru and the device address on the host is >> 02.0. This test does detect the Intel IGD correctly. >> >> v4: Use brchuckz@aol.com instead of brchuckz@netscape.net for the author's >> email address to match the address used by the same author in commits >> be9c61da and c0e86b76 >> >> Change variable for XEN_PT_DEVICE_CLASS: xptc changed to xpdc >> >> v5: The patch of xen_pt.c was re-worked to allow a more consistent test >> for the Intel IGD that uses the same criteria as in other places. >> This involved moving the call to xen_host_pci_device_get from >> xen_pt_realize to xen_igd_clear_slot and updating the checks for the >> Intel IGD in xen_igd_clear_slot: >> >> if (xen_igd_gfx_pt_enabled() && (s->hostaddr.slot == 2) >> && (s->hostaddr.function == 0)) { >> >> is changed to >> >> if (is_igd_vga_passthrough(&s->real_device) && >> s->real_device.domain == 0 && s->real_device.bus == 0 && >> s->real_device.dev == 2 && s->real_device.func == 0 && >> s->real_device.vendor_id == PCI_VENDOR_ID_INTEL) { >> >> Added an explanation for the move of xen_host_pci_device_get from >> xen_pt_realize to xen_igd_clear_slot to the commit message. >> >> Rebase. >> >> v6: Fix logging by removing these lines from the move from xen_pt_realize >> to xen_igd_clear_slot that was done in v5: >> >> XEN_PT_LOG(d, "Assigning real physical device %02x:%02x.%d" >> " to devfn 0x%x\n", >> s->hostaddr.bus, s->hostaddr.slot, s->hostaddr.function, >> s->dev.devfn); >> >> This log needs to be in xen_pt_realize because s->dev.devfn is not >> set yet in xen_igd_clear_slot. >> >> v7: The v7 that was posted to the mailing list was incorrect. v8 is what >> v7 was intended to be. >> >> v8: Inhibit out of context log message and needless processing by >> adding 2 lines at the top of the new xen_igd_clear_slot function: >> >> if (!(pci_bus->slot_reserved_mask & XEN_PCI_IGD_SLOT_MASK)) >> return; >> >> Rebase. This removed an unnecessary header file from xen_pt.h >> >> v9: Move check for xen_igd_gfx_pt_enabled() from pc_piix.c to xen_pt.c >> >> Move #include "hw/pci/pci_bus.h" from xen_pt.h to xen_pt.c >> >> Introduce macros for the IGD devfn constants and use them to compute >> the value of XEN_PCI_IGD_SLOT_MASK >> >> Also use the new macros at an appropriate place in xen_pt_realize >> >> Add Cc: to stable - This has been broken for a long time, ever since >> support for igd-passthru was added to Qemu 7 >> years ago. >> >> Mention new macros in the commit message (Michael Tsirkin) >> >> N.B.: I could not follow the suggestion to move the statement >> pci_bus->slot_reserved_mask &= ~XEN_PCI_IGD_SLOT_MASK; to after >> pci_qdev_realize for symmetry. Doing that results in an error when >> creating the guest: >> >> libxl: error: libxl_qmp.c:1837:qmp_ev_parse_error_messages: Domain 4:PCI: slot 2 function 0 not available for xen-pci-passthrough, reserved >> libxl: error: libxl_pci.c:1809:device_pci_add_done: Domain 4:libxl__device_pci_add failed for PCI device 0:0:2.0 (rc -28) >> libxl: error: libxl_create.c:1921:domcreate_attach_devices: Domain 4:unable to add pci devices >> >> v10: Change in xen_pt.c at xen_igd_clear_slot from >> >> if (!(pci_bus->slot_reserved_mask & XEN_PCI_IGD_SLOT_MASK)) >> return; >> >> xen_host_pci_device_get(&s->real_device, >> s->hostaddr.domain, s->hostaddr.bus, >> s->hostaddr.slot, s->hostaddr.function, >> errp); >> if (*errp) { >> error_append_hint(errp, "Failed to \"open\" the real pci device"); >> return; >> } >> >> to: >> >> xen_host_pci_device_get(&s->real_device, >> s->hostaddr.domain, s->hostaddr.bus, >> s->hostaddr.slot, s->hostaddr.function, >> errp); >> if (*errp) { >> error_append_hint(errp, "Failed to \"open\" the real pci device"); >> return; >> } >> >> if (!(pci_bus->slot_reserved_mask & XEN_PCI_IGD_SLOT_MASK)) { >> xpdc->pci_qdev_realize(qdev, errp); >> return; >> } >> >> Testing shows this fixes the problem of xen_host_pci_device_get >> and xpdc->pci_qdev_realize not being called if xen_igd_clear_slot >> returns because the bit to reserve slot 2 in slot_reserved_mask is >> not set. Without this change, guest creation fails in the cases >> when the bit to reserve slot 2 in slot_reserved_mask is not set. >> Thanks, Stefano! >> >> Also, in addition to mentioning the workaround of using the >> traditional qemu device model available from xenbits.xen.org in the >> commit message, also mention in the commit message the workaround >> of using the "pc" machine type instead of the "xenfv" machine type, >> which results in reduced startup performance. >> >> Rebase. >> >> Add Igor Mammedov <imammedo@redhat.com> to Cc. >> >> v11: I noticed a style mistake that has been present in the past few >> versions that no one noticed. This version fixes it. No >> functional change in v11. I also did more tests on different guests >> such as guests that don't have igd-passthru=on set. No regressions >> were observed. >> >> The style mistake (missing braces) is fixed as follows: >> >> xen_pt.c at xen_igd_reserve_slot is changed from >> >> if (!xen_igd_gfx_pt_enabled()) >> return; >> >> to >> >> if (!xen_igd_gfx_pt_enabled()) { >> return; >> } >> >> hw/i386/pc_piix.c | 1 + >> hw/xen/xen_pt.c | 64 ++++++++++++++++++++++++++++++++++++-------- >> hw/xen/xen_pt.h | 20 ++++++++++++++ >> hw/xen/xen_pt_stub.c | 4 +++ >> 4 files changed, 78 insertions(+), 11 deletions(-) > > > For the 1-liner in PC: > > Reviewed-by: Michael S. Tsirkin <mst@redhat.com> > > but I really leave this up to Xen maintainers to decide whether > the patch is needed and makes sense. Thanks, Michael! Stefano, I think I answered the important question you raised when you looked at v9 in v10/v11. Anthony, the patch has been through several iterations and improvements since you reviewed v6. So I think this is ready if the Xen developers want to do it. Thanks, Chuck > > >> diff --git a/hw/i386/pc_piix.c b/hw/i386/pc_piix.c >> index df64dd8dcc..a9d535c815 100644 >> --- a/hw/i386/pc_piix.c >> +++ b/hw/i386/pc_piix.c >> @@ -421,6 +421,7 @@ static void pc_xen_hvm_init(MachineState *machine) >> } >> >> pc_xen_hvm_init_pci(machine); >> + xen_igd_reserve_slot(pcms->bus); >> pci_create_simple(pcms->bus, -1, "xen-platform"); >> } >> #endif >> diff --git a/hw/xen/xen_pt.c b/hw/xen/xen_pt.c >> index 8db0532632..85c93cffcf 100644 >> --- a/hw/xen/xen_pt.c >> +++ b/hw/xen/xen_pt.c >> @@ -57,6 +57,7 @@ >> #include <sys/ioctl.h> >> >> #include "hw/pci/pci.h" >> +#include "hw/pci/pci_bus.h" >> #include "hw/qdev-properties.h" >> #include "hw/qdev-properties-system.h" >> #include "hw/xen/xen.h" >> @@ -780,15 +781,6 @@ static void xen_pt_realize(PCIDevice *d, Error **errp) >> s->hostaddr.bus, s->hostaddr.slot, s->hostaddr.function, >> s->dev.devfn); >> >> - xen_host_pci_device_get(&s->real_device, >> - s->hostaddr.domain, s->hostaddr.bus, >> - s->hostaddr.slot, s->hostaddr.function, >> - errp); >> - if (*errp) { >> - error_append_hint(errp, "Failed to \"open\" the real pci device"); >> - return; >> - } >> - >> s->is_virtfn = s->real_device.is_virtfn; >> if (s->is_virtfn) { >> XEN_PT_LOG(d, "%04x:%02x:%02x.%d is a SR-IOV Virtual Function\n", >> @@ -803,8 +795,10 @@ static void xen_pt_realize(PCIDevice *d, Error **errp) >> s->io_listener = xen_pt_io_listener; >> >> /* Setup VGA bios for passthrough GFX */ >> - if ((s->real_device.domain == 0) && (s->real_device.bus == 0) && >> - (s->real_device.dev == 2) && (s->real_device.func == 0)) { >> + if ((s->real_device.domain == XEN_PCI_IGD_DOMAIN) && >> + (s->real_device.bus == XEN_PCI_IGD_BUS) && >> + (s->real_device.dev == XEN_PCI_IGD_DEV) && >> + (s->real_device.func == XEN_PCI_IGD_FN)) { >> if (!is_igd_vga_passthrough(&s->real_device)) { >> error_setg(errp, "Need to enable igd-passthru if you're trying" >> " to passthrough IGD GFX"); >> @@ -950,11 +944,58 @@ static void xen_pci_passthrough_instance_init(Object *obj) >> PCI_DEVICE(obj)->cap_present |= QEMU_PCI_CAP_EXPRESS; >> } >> >> +void xen_igd_reserve_slot(PCIBus *pci_bus) >> +{ >> + if (!xen_igd_gfx_pt_enabled()) { >> + return; >> + } >> + >> + XEN_PT_LOG(0, "Reserving PCI slot 2 for IGD\n"); >> + pci_bus->slot_reserved_mask |= XEN_PCI_IGD_SLOT_MASK; >> +} >> + >> +static void xen_igd_clear_slot(DeviceState *qdev, Error **errp) >> +{ >> + ERRP_GUARD(); >> + PCIDevice *pci_dev = (PCIDevice *)qdev; >> + XenPCIPassthroughState *s = XEN_PT_DEVICE(pci_dev); >> + XenPTDeviceClass *xpdc = XEN_PT_DEVICE_GET_CLASS(s); >> + PCIBus *pci_bus = pci_get_bus(pci_dev); >> + >> + xen_host_pci_device_get(&s->real_device, >> + s->hostaddr.domain, s->hostaddr.bus, >> + s->hostaddr.slot, s->hostaddr.function, >> + errp); >> + if (*errp) { >> + error_append_hint(errp, "Failed to \"open\" the real pci device"); >> + return; >> + } >> + >> + if (!(pci_bus->slot_reserved_mask & XEN_PCI_IGD_SLOT_MASK)) { >> + xpdc->pci_qdev_realize(qdev, errp); >> + return; >> + } >> + >> + if (is_igd_vga_passthrough(&s->real_device) && >> + s->real_device.domain == XEN_PCI_IGD_DOMAIN && >> + s->real_device.bus == XEN_PCI_IGD_BUS && >> + s->real_device.dev == XEN_PCI_IGD_DEV && >> + s->real_device.func == XEN_PCI_IGD_FN && >> + s->real_device.vendor_id == PCI_VENDOR_ID_INTEL) { >> + pci_bus->slot_reserved_mask &= ~XEN_PCI_IGD_SLOT_MASK; >> + XEN_PT_LOG(pci_dev, "Intel IGD found, using slot 2\n"); >> + } >> + xpdc->pci_qdev_realize(qdev, errp); >> +} >> + >> static void xen_pci_passthrough_class_init(ObjectClass *klass, void *data) >> { >> DeviceClass *dc = DEVICE_CLASS(klass); >> PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); >> >> + XenPTDeviceClass *xpdc = XEN_PT_DEVICE_CLASS(klass); >> + xpdc->pci_qdev_realize = dc->realize; >> + dc->realize = xen_igd_clear_slot; >> k->realize = xen_pt_realize; >> k->exit = xen_pt_unregister_device; >> k->config_read = xen_pt_pci_read_config; >> @@ -977,6 +1018,7 @@ static const TypeInfo xen_pci_passthrough_info = { >> .instance_size = sizeof(XenPCIPassthroughState), >> .instance_finalize = xen_pci_passthrough_finalize, >> .class_init = xen_pci_passthrough_class_init, >> + .class_size = sizeof(XenPTDeviceClass), >> .instance_init = xen_pci_passthrough_instance_init, >> .interfaces = (InterfaceInfo[]) { >> { INTERFACE_CONVENTIONAL_PCI_DEVICE }, >> diff --git a/hw/xen/xen_pt.h b/hw/xen/xen_pt.h >> index cf10fc7bbf..e184699740 100644 >> --- a/hw/xen/xen_pt.h >> +++ b/hw/xen/xen_pt.h >> @@ -40,7 +40,20 @@ typedef struct XenPTReg XenPTReg; >> #define TYPE_XEN_PT_DEVICE "xen-pci-passthrough" >> OBJECT_DECLARE_SIMPLE_TYPE(XenPCIPassthroughState, XEN_PT_DEVICE) >> >> +#define XEN_PT_DEVICE_CLASS(klass) \ >> + OBJECT_CLASS_CHECK(XenPTDeviceClass, klass, TYPE_XEN_PT_DEVICE) >> +#define XEN_PT_DEVICE_GET_CLASS(obj) \ >> + OBJECT_GET_CLASS(XenPTDeviceClass, obj, TYPE_XEN_PT_DEVICE) >> + >> +typedef void (*XenPTQdevRealize)(DeviceState *qdev, Error **errp); >> + >> +typedef struct XenPTDeviceClass { >> + PCIDeviceClass parent_class; >> + XenPTQdevRealize pci_qdev_realize; >> +} XenPTDeviceClass; >> + >> uint32_t igd_read_opregion(XenPCIPassthroughState *s); >> +void xen_igd_reserve_slot(PCIBus *pci_bus); >> void igd_write_opregion(XenPCIPassthroughState *s, uint32_t val); >> void xen_igd_passthrough_isa_bridge_create(XenPCIPassthroughState *s, >> XenHostPCIDevice *dev); >> @@ -75,6 +88,13 @@ typedef int (*xen_pt_conf_byte_read) >> >> #define XEN_PCI_INTEL_OPREGION 0xfc >> >> +#define XEN_PCI_IGD_DOMAIN 0 >> +#define XEN_PCI_IGD_BUS 0 >> +#define XEN_PCI_IGD_DEV 2 >> +#define XEN_PCI_IGD_FN 0 >> +#define XEN_PCI_IGD_SLOT_MASK \ >> + (1UL << PCI_SLOT(PCI_DEVFN(XEN_PCI_IGD_DEV, XEN_PCI_IGD_FN))) >> + >> typedef enum { >> XEN_PT_GRP_TYPE_HARDWIRED = 0, /* 0 Hardwired reg group */ >> XEN_PT_GRP_TYPE_EMU, /* emul reg group */ >> diff --git a/hw/xen/xen_pt_stub.c b/hw/xen/xen_pt_stub.c >> index 2d8cac8d54..5c108446a8 100644 >> --- a/hw/xen/xen_pt_stub.c >> +++ b/hw/xen/xen_pt_stub.c >> @@ -20,3 +20,7 @@ void xen_igd_gfx_pt_set(bool value, Error **errp) >> error_setg(errp, "Xen PCI passthrough support not built in"); >> } >> } >> + >> +void xen_igd_reserve_slot(PCIBus *pci_bus) >> +{ >> +} >> -- >> 2.39.0 >
On Sat, 21 Jan 2023, Chuck Zmudzinski wrote: > Intel specifies that the Intel IGD must occupy slot 2 on the PCI bus, > as noted in docs/igd-assign.txt in the Qemu source code. > > Currently, when the xl toolstack is used to configure a Xen HVM guest with > Intel IGD passthrough to the guest with the Qemu upstream device model, > a Qemu emulated PCI device will occupy slot 2 and the Intel IGD will occupy > a different slot. This problem often prevents the guest from booting. > > The only available workarounds are not good: Configure Xen HVM guests to > use the old and no longer maintained Qemu traditional device model > available from xenbits.xen.org which does reserve slot 2 for the Intel > IGD or use the "pc" machine type instead of the "xenfv" machine type and > add the xen platform device at slot 3 using a command line option > instead of patching qemu to fix the "xenfv" machine type directly. The > second workaround causes some degredation in startup performance such as > a longer boot time and reduced resolution of the grub menu that is > displayed on the monitor. This patch avoids that reduced startup > performance when using the Qemu upstream device model for Xen HVM guests > configured with the igd-passthru=on option. > > To implement this feature in the Qemu upstream device model for Xen HVM > guests, introduce the following new functions, types, and macros: > > * XEN_PT_DEVICE_CLASS declaration, based on the existing TYPE_XEN_PT_DEVICE > * XEN_PT_DEVICE_GET_CLASS macro helper function for XEN_PT_DEVICE_CLASS > * typedef XenPTQdevRealize function pointer > * XEN_PCI_IGD_SLOT_MASK, the value of slot_reserved_mask to reserve slot 2 > * xen_igd_reserve_slot and xen_igd_clear_slot functions > > Michael Tsirkin: > * Introduce XEN_PCI_IGD_DOMAIN, XEN_PCI_IGD_BUS, XEN_PCI_IGD_DEV, and > XEN_PCI_IGD_FN - use them to compute the value of XEN_PCI_IGD_SLOT_MASK > > The new xen_igd_reserve_slot function uses the existing slot_reserved_mask > member of PCIBus to reserve PCI slot 2 for Xen HVM guests configured using > the xl toolstack with the gfx_passthru option enabled, which sets the > igd-passthru=on option to Qemu for the Xen HVM machine type. > > The new xen_igd_reserve_slot function also needs to be implemented in > hw/xen/xen_pt_stub.c to prevent FTBFS during the link stage for the case > when Qemu is configured with --enable-xen and --disable-xen-pci-passthrough, > in which case it does nothing. > > The new xen_igd_clear_slot function overrides qdev->realize of the parent > PCI device class to enable the Intel IGD to occupy slot 2 on the PCI bus > since slot 2 was reserved by xen_igd_reserve_slot when the PCI bus was > created in hw/i386/pc_piix.c for the case when igd-passthru=on. > > Move the call to xen_host_pci_device_get, and the associated error > handling, from xen_pt_realize to the new xen_igd_clear_slot function to > initialize the device class and vendor values which enables the checks for > the Intel IGD to succeed. The verification that the host device is an > Intel IGD to be passed through is done by checking the domain, bus, slot, > and function values as well as by checking that gfx_passthru is enabled, > the device class is VGA, and the device vendor in Intel. > > Signed-off-by: Chuck Zmudzinski <brchuckz@aol.com> > --- > Notes that might be helpful to reviewers of patched code in hw/xen: > > The new functions and types are based on recommendations from Qemu docs: > https://qemu.readthedocs.io/en/latest/devel/qom.html > > Notes that might be helpful to reviewers of patched code in hw/i386: > > The small patch to hw/i386/pc_piix.c is protected by CONFIG_XEN so it does > not affect builds that do not have CONFIG_XEN defined. > > xen_igd_gfx_pt_enabled() in the patched hw/i386/pc_piix.c file is an > existing function that is only true when Qemu is built with > xen-pci-passthrough enabled and the administrator has configured the Xen > HVM guest with Qemu's igd-passthru=on option. > > v2: Remove From: <email address> tag at top of commit message > > v3: Changed the test for the Intel IGD in xen_igd_clear_slot: > > if (is_igd_vga_passthrough(&s->real_device) && > (s->real_device.vendor_id == PCI_VENDOR_ID_INTEL)) { > > is changed to > > if (xen_igd_gfx_pt_enabled() && (s->hostaddr.slot == 2) > && (s->hostaddr.function == 0)) { > > I hoped that I could use the test in v2, since it matches the > other tests for the Intel IGD in Qemu and Xen, but those tests > do not work because the necessary data structures are not set with > their values yet. So instead use the test that the administrator > has enabled gfx_passthru and the device address on the host is > 02.0. This test does detect the Intel IGD correctly. > > v4: Use brchuckz@aol.com instead of brchuckz@netscape.net for the author's > email address to match the address used by the same author in commits > be9c61da and c0e86b76 > > Change variable for XEN_PT_DEVICE_CLASS: xptc changed to xpdc > > v5: The patch of xen_pt.c was re-worked to allow a more consistent test > for the Intel IGD that uses the same criteria as in other places. > This involved moving the call to xen_host_pci_device_get from > xen_pt_realize to xen_igd_clear_slot and updating the checks for the > Intel IGD in xen_igd_clear_slot: > > if (xen_igd_gfx_pt_enabled() && (s->hostaddr.slot == 2) > && (s->hostaddr.function == 0)) { > > is changed to > > if (is_igd_vga_passthrough(&s->real_device) && > s->real_device.domain == 0 && s->real_device.bus == 0 && > s->real_device.dev == 2 && s->real_device.func == 0 && > s->real_device.vendor_id == PCI_VENDOR_ID_INTEL) { > > Added an explanation for the move of xen_host_pci_device_get from > xen_pt_realize to xen_igd_clear_slot to the commit message. > > Rebase. > > v6: Fix logging by removing these lines from the move from xen_pt_realize > to xen_igd_clear_slot that was done in v5: > > XEN_PT_LOG(d, "Assigning real physical device %02x:%02x.%d" > " to devfn 0x%x\n", > s->hostaddr.bus, s->hostaddr.slot, s->hostaddr.function, > s->dev.devfn); > > This log needs to be in xen_pt_realize because s->dev.devfn is not > set yet in xen_igd_clear_slot. > > v7: The v7 that was posted to the mailing list was incorrect. v8 is what > v7 was intended to be. > > v8: Inhibit out of context log message and needless processing by > adding 2 lines at the top of the new xen_igd_clear_slot function: > > if (!(pci_bus->slot_reserved_mask & XEN_PCI_IGD_SLOT_MASK)) > return; > > Rebase. This removed an unnecessary header file from xen_pt.h > > v9: Move check for xen_igd_gfx_pt_enabled() from pc_piix.c to xen_pt.c > > Move #include "hw/pci/pci_bus.h" from xen_pt.h to xen_pt.c > > Introduce macros for the IGD devfn constants and use them to compute > the value of XEN_PCI_IGD_SLOT_MASK > > Also use the new macros at an appropriate place in xen_pt_realize > > Add Cc: to stable - This has been broken for a long time, ever since > support for igd-passthru was added to Qemu 7 > years ago. > > Mention new macros in the commit message (Michael Tsirkin) > > N.B.: I could not follow the suggestion to move the statement > pci_bus->slot_reserved_mask &= ~XEN_PCI_IGD_SLOT_MASK; to after > pci_qdev_realize for symmetry. Doing that results in an error when > creating the guest: > > libxl: error: libxl_qmp.c:1837:qmp_ev_parse_error_messages: Domain 4:PCI: slot 2 function 0 not available for xen-pci-passthrough, reserved > libxl: error: libxl_pci.c:1809:device_pci_add_done: Domain 4:libxl__device_pci_add failed for PCI device 0:0:2.0 (rc -28) > libxl: error: libxl_create.c:1921:domcreate_attach_devices: Domain 4:unable to add pci devices > > v10: Change in xen_pt.c at xen_igd_clear_slot from > > if (!(pci_bus->slot_reserved_mask & XEN_PCI_IGD_SLOT_MASK)) > return; > > xen_host_pci_device_get(&s->real_device, > s->hostaddr.domain, s->hostaddr.bus, > s->hostaddr.slot, s->hostaddr.function, > errp); > if (*errp) { > error_append_hint(errp, "Failed to \"open\" the real pci device"); > return; > } > > to: > > xen_host_pci_device_get(&s->real_device, > s->hostaddr.domain, s->hostaddr.bus, > s->hostaddr.slot, s->hostaddr.function, > errp); > if (*errp) { > error_append_hint(errp, "Failed to \"open\" the real pci device"); > return; > } > > if (!(pci_bus->slot_reserved_mask & XEN_PCI_IGD_SLOT_MASK)) { > xpdc->pci_qdev_realize(qdev, errp); > return; > } > > Testing shows this fixes the problem of xen_host_pci_device_get > and xpdc->pci_qdev_realize not being called if xen_igd_clear_slot > returns because the bit to reserve slot 2 in slot_reserved_mask is > not set. Without this change, guest creation fails in the cases > when the bit to reserve slot 2 in slot_reserved_mask is not set. > Thanks, Stefano! > > Also, in addition to mentioning the workaround of using the > traditional qemu device model available from xenbits.xen.org in the > commit message, also mention in the commit message the workaround > of using the "pc" machine type instead of the "xenfv" machine type, > which results in reduced startup performance. > > Rebase. > > Add Igor Mammedov <imammedo@redhat.com> to Cc. > > v11: I noticed a style mistake that has been present in the past few > versions that no one noticed. This version fixes it. No > functional change in v11. I also did more tests on different guests > such as guests that don't have igd-passthru=on set. No regressions > were observed. > > The style mistake (missing braces) is fixed as follows: > > xen_pt.c at xen_igd_reserve_slot is changed from > > if (!xen_igd_gfx_pt_enabled()) > return; > > to > > if (!xen_igd_gfx_pt_enabled()) { > return; > } > > hw/i386/pc_piix.c | 1 + > hw/xen/xen_pt.c | 64 ++++++++++++++++++++++++++++++++++++-------- > hw/xen/xen_pt.h | 20 ++++++++++++++ > hw/xen/xen_pt_stub.c | 4 +++ > 4 files changed, 78 insertions(+), 11 deletions(-) Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> > diff --git a/hw/i386/pc_piix.c b/hw/i386/pc_piix.c > index df64dd8dcc..a9d535c815 100644 > --- a/hw/i386/pc_piix.c > +++ b/hw/i386/pc_piix.c > @@ -421,6 +421,7 @@ static void pc_xen_hvm_init(MachineState *machine) > } > > pc_xen_hvm_init_pci(machine); > + xen_igd_reserve_slot(pcms->bus); > pci_create_simple(pcms->bus, -1, "xen-platform"); > } > #endif > diff --git a/hw/xen/xen_pt.c b/hw/xen/xen_pt.c > index 8db0532632..85c93cffcf 100644 > --- a/hw/xen/xen_pt.c > +++ b/hw/xen/xen_pt.c > @@ -57,6 +57,7 @@ > #include <sys/ioctl.h> > > #include "hw/pci/pci.h" > +#include "hw/pci/pci_bus.h" > #include "hw/qdev-properties.h" > #include "hw/qdev-properties-system.h" > #include "hw/xen/xen.h" > @@ -780,15 +781,6 @@ static void xen_pt_realize(PCIDevice *d, Error **errp) > s->hostaddr.bus, s->hostaddr.slot, s->hostaddr.function, > s->dev.devfn); > > - xen_host_pci_device_get(&s->real_device, > - s->hostaddr.domain, s->hostaddr.bus, > - s->hostaddr.slot, s->hostaddr.function, > - errp); > - if (*errp) { > - error_append_hint(errp, "Failed to \"open\" the real pci device"); > - return; > - } > - > s->is_virtfn = s->real_device.is_virtfn; > if (s->is_virtfn) { > XEN_PT_LOG(d, "%04x:%02x:%02x.%d is a SR-IOV Virtual Function\n", > @@ -803,8 +795,10 @@ static void xen_pt_realize(PCIDevice *d, Error **errp) > s->io_listener = xen_pt_io_listener; > > /* Setup VGA bios for passthrough GFX */ > - if ((s->real_device.domain == 0) && (s->real_device.bus == 0) && > - (s->real_device.dev == 2) && (s->real_device.func == 0)) { > + if ((s->real_device.domain == XEN_PCI_IGD_DOMAIN) && > + (s->real_device.bus == XEN_PCI_IGD_BUS) && > + (s->real_device.dev == XEN_PCI_IGD_DEV) && > + (s->real_device.func == XEN_PCI_IGD_FN)) { > if (!is_igd_vga_passthrough(&s->real_device)) { > error_setg(errp, "Need to enable igd-passthru if you're trying" > " to passthrough IGD GFX"); > @@ -950,11 +944,58 @@ static void xen_pci_passthrough_instance_init(Object *obj) > PCI_DEVICE(obj)->cap_present |= QEMU_PCI_CAP_EXPRESS; > } > > +void xen_igd_reserve_slot(PCIBus *pci_bus) > +{ > + if (!xen_igd_gfx_pt_enabled()) { > + return; > + } > + > + XEN_PT_LOG(0, "Reserving PCI slot 2 for IGD\n"); > + pci_bus->slot_reserved_mask |= XEN_PCI_IGD_SLOT_MASK; > +} > + > +static void xen_igd_clear_slot(DeviceState *qdev, Error **errp) > +{ > + ERRP_GUARD(); > + PCIDevice *pci_dev = (PCIDevice *)qdev; > + XenPCIPassthroughState *s = XEN_PT_DEVICE(pci_dev); > + XenPTDeviceClass *xpdc = XEN_PT_DEVICE_GET_CLASS(s); > + PCIBus *pci_bus = pci_get_bus(pci_dev); > + > + xen_host_pci_device_get(&s->real_device, > + s->hostaddr.domain, s->hostaddr.bus, > + s->hostaddr.slot, s->hostaddr.function, > + errp); > + if (*errp) { > + error_append_hint(errp, "Failed to \"open\" the real pci device"); > + return; > + } > + > + if (!(pci_bus->slot_reserved_mask & XEN_PCI_IGD_SLOT_MASK)) { > + xpdc->pci_qdev_realize(qdev, errp); > + return; > + } > + > + if (is_igd_vga_passthrough(&s->real_device) && > + s->real_device.domain == XEN_PCI_IGD_DOMAIN && > + s->real_device.bus == XEN_PCI_IGD_BUS && > + s->real_device.dev == XEN_PCI_IGD_DEV && > + s->real_device.func == XEN_PCI_IGD_FN && > + s->real_device.vendor_id == PCI_VENDOR_ID_INTEL) { > + pci_bus->slot_reserved_mask &= ~XEN_PCI_IGD_SLOT_MASK; > + XEN_PT_LOG(pci_dev, "Intel IGD found, using slot 2\n"); > + } > + xpdc->pci_qdev_realize(qdev, errp); > +} > + > static void xen_pci_passthrough_class_init(ObjectClass *klass, void *data) > { > DeviceClass *dc = DEVICE_CLASS(klass); > PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); > > + XenPTDeviceClass *xpdc = XEN_PT_DEVICE_CLASS(klass); > + xpdc->pci_qdev_realize = dc->realize; > + dc->realize = xen_igd_clear_slot; > k->realize = xen_pt_realize; > k->exit = xen_pt_unregister_device; > k->config_read = xen_pt_pci_read_config; > @@ -977,6 +1018,7 @@ static const TypeInfo xen_pci_passthrough_info = { > .instance_size = sizeof(XenPCIPassthroughState), > .instance_finalize = xen_pci_passthrough_finalize, > .class_init = xen_pci_passthrough_class_init, > + .class_size = sizeof(XenPTDeviceClass), > .instance_init = xen_pci_passthrough_instance_init, > .interfaces = (InterfaceInfo[]) { > { INTERFACE_CONVENTIONAL_PCI_DEVICE }, > diff --git a/hw/xen/xen_pt.h b/hw/xen/xen_pt.h > index cf10fc7bbf..e184699740 100644 > --- a/hw/xen/xen_pt.h > +++ b/hw/xen/xen_pt.h > @@ -40,7 +40,20 @@ typedef struct XenPTReg XenPTReg; > #define TYPE_XEN_PT_DEVICE "xen-pci-passthrough" > OBJECT_DECLARE_SIMPLE_TYPE(XenPCIPassthroughState, XEN_PT_DEVICE) > > +#define XEN_PT_DEVICE_CLASS(klass) \ > + OBJECT_CLASS_CHECK(XenPTDeviceClass, klass, TYPE_XEN_PT_DEVICE) > +#define XEN_PT_DEVICE_GET_CLASS(obj) \ > + OBJECT_GET_CLASS(XenPTDeviceClass, obj, TYPE_XEN_PT_DEVICE) > + > +typedef void (*XenPTQdevRealize)(DeviceState *qdev, Error **errp); > + > +typedef struct XenPTDeviceClass { > + PCIDeviceClass parent_class; > + XenPTQdevRealize pci_qdev_realize; > +} XenPTDeviceClass; > + > uint32_t igd_read_opregion(XenPCIPassthroughState *s); > +void xen_igd_reserve_slot(PCIBus *pci_bus); > void igd_write_opregion(XenPCIPassthroughState *s, uint32_t val); > void xen_igd_passthrough_isa_bridge_create(XenPCIPassthroughState *s, > XenHostPCIDevice *dev); > @@ -75,6 +88,13 @@ typedef int (*xen_pt_conf_byte_read) > > #define XEN_PCI_INTEL_OPREGION 0xfc > > +#define XEN_PCI_IGD_DOMAIN 0 > +#define XEN_PCI_IGD_BUS 0 > +#define XEN_PCI_IGD_DEV 2 > +#define XEN_PCI_IGD_FN 0 > +#define XEN_PCI_IGD_SLOT_MASK \ > + (1UL << PCI_SLOT(PCI_DEVFN(XEN_PCI_IGD_DEV, XEN_PCI_IGD_FN))) > + > typedef enum { > XEN_PT_GRP_TYPE_HARDWIRED = 0, /* 0 Hardwired reg group */ > XEN_PT_GRP_TYPE_EMU, /* emul reg group */ > diff --git a/hw/xen/xen_pt_stub.c b/hw/xen/xen_pt_stub.c > index 2d8cac8d54..5c108446a8 100644 > --- a/hw/xen/xen_pt_stub.c > +++ b/hw/xen/xen_pt_stub.c > @@ -20,3 +20,7 @@ void xen_igd_gfx_pt_set(bool value, Error **errp) > error_setg(errp, "Xen PCI passthrough support not built in"); > } > } > + > +void xen_igd_reserve_slot(PCIBus *pci_bus) > +{ > +} > -- > 2.39.0 >
diff --git a/hw/i386/pc_piix.c b/hw/i386/pc_piix.c index df64dd8dcc..a9d535c815 100644 --- a/hw/i386/pc_piix.c +++ b/hw/i386/pc_piix.c @@ -421,6 +421,7 @@ static void pc_xen_hvm_init(MachineState *machine) } pc_xen_hvm_init_pci(machine); + xen_igd_reserve_slot(pcms->bus); pci_create_simple(pcms->bus, -1, "xen-platform"); } #endif diff --git a/hw/xen/xen_pt.c b/hw/xen/xen_pt.c index 8db0532632..85c93cffcf 100644 --- a/hw/xen/xen_pt.c +++ b/hw/xen/xen_pt.c @@ -57,6 +57,7 @@ #include <sys/ioctl.h> #include "hw/pci/pci.h" +#include "hw/pci/pci_bus.h" #include "hw/qdev-properties.h" #include "hw/qdev-properties-system.h" #include "hw/xen/xen.h" @@ -780,15 +781,6 @@ static void xen_pt_realize(PCIDevice *d, Error **errp) s->hostaddr.bus, s->hostaddr.slot, s->hostaddr.function, s->dev.devfn); - xen_host_pci_device_get(&s->real_device, - s->hostaddr.domain, s->hostaddr.bus, - s->hostaddr.slot, s->hostaddr.function, - errp); - if (*errp) { - error_append_hint(errp, "Failed to \"open\" the real pci device"); - return; - } - s->is_virtfn = s->real_device.is_virtfn; if (s->is_virtfn) { XEN_PT_LOG(d, "%04x:%02x:%02x.%d is a SR-IOV Virtual Function\n", @@ -803,8 +795,10 @@ static void xen_pt_realize(PCIDevice *d, Error **errp) s->io_listener = xen_pt_io_listener; /* Setup VGA bios for passthrough GFX */ - if ((s->real_device.domain == 0) && (s->real_device.bus == 0) && - (s->real_device.dev == 2) && (s->real_device.func == 0)) { + if ((s->real_device.domain == XEN_PCI_IGD_DOMAIN) && + (s->real_device.bus == XEN_PCI_IGD_BUS) && + (s->real_device.dev == XEN_PCI_IGD_DEV) && + (s->real_device.func == XEN_PCI_IGD_FN)) { if (!is_igd_vga_passthrough(&s->real_device)) { error_setg(errp, "Need to enable igd-passthru if you're trying" " to passthrough IGD GFX"); @@ -950,11 +944,58 @@ static void xen_pci_passthrough_instance_init(Object *obj) PCI_DEVICE(obj)->cap_present |= QEMU_PCI_CAP_EXPRESS; } +void xen_igd_reserve_slot(PCIBus *pci_bus) +{ + if (!xen_igd_gfx_pt_enabled()) { + return; + } + + XEN_PT_LOG(0, "Reserving PCI slot 2 for IGD\n"); + pci_bus->slot_reserved_mask |= XEN_PCI_IGD_SLOT_MASK; +} + +static void xen_igd_clear_slot(DeviceState *qdev, Error **errp) +{ + ERRP_GUARD(); + PCIDevice *pci_dev = (PCIDevice *)qdev; + XenPCIPassthroughState *s = XEN_PT_DEVICE(pci_dev); + XenPTDeviceClass *xpdc = XEN_PT_DEVICE_GET_CLASS(s); + PCIBus *pci_bus = pci_get_bus(pci_dev); + + xen_host_pci_device_get(&s->real_device, + s->hostaddr.domain, s->hostaddr.bus, + s->hostaddr.slot, s->hostaddr.function, + errp); + if (*errp) { + error_append_hint(errp, "Failed to \"open\" the real pci device"); + return; + } + + if (!(pci_bus->slot_reserved_mask & XEN_PCI_IGD_SLOT_MASK)) { + xpdc->pci_qdev_realize(qdev, errp); + return; + } + + if (is_igd_vga_passthrough(&s->real_device) && + s->real_device.domain == XEN_PCI_IGD_DOMAIN && + s->real_device.bus == XEN_PCI_IGD_BUS && + s->real_device.dev == XEN_PCI_IGD_DEV && + s->real_device.func == XEN_PCI_IGD_FN && + s->real_device.vendor_id == PCI_VENDOR_ID_INTEL) { + pci_bus->slot_reserved_mask &= ~XEN_PCI_IGD_SLOT_MASK; + XEN_PT_LOG(pci_dev, "Intel IGD found, using slot 2\n"); + } + xpdc->pci_qdev_realize(qdev, errp); +} + static void xen_pci_passthrough_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); + XenPTDeviceClass *xpdc = XEN_PT_DEVICE_CLASS(klass); + xpdc->pci_qdev_realize = dc->realize; + dc->realize = xen_igd_clear_slot; k->realize = xen_pt_realize; k->exit = xen_pt_unregister_device; k->config_read = xen_pt_pci_read_config; @@ -977,6 +1018,7 @@ static const TypeInfo xen_pci_passthrough_info = { .instance_size = sizeof(XenPCIPassthroughState), .instance_finalize = xen_pci_passthrough_finalize, .class_init = xen_pci_passthrough_class_init, + .class_size = sizeof(XenPTDeviceClass), .instance_init = xen_pci_passthrough_instance_init, .interfaces = (InterfaceInfo[]) { { INTERFACE_CONVENTIONAL_PCI_DEVICE }, diff --git a/hw/xen/xen_pt.h b/hw/xen/xen_pt.h index cf10fc7bbf..e184699740 100644 --- a/hw/xen/xen_pt.h +++ b/hw/xen/xen_pt.h @@ -40,7 +40,20 @@ typedef struct XenPTReg XenPTReg; #define TYPE_XEN_PT_DEVICE "xen-pci-passthrough" OBJECT_DECLARE_SIMPLE_TYPE(XenPCIPassthroughState, XEN_PT_DEVICE) +#define XEN_PT_DEVICE_CLASS(klass) \ + OBJECT_CLASS_CHECK(XenPTDeviceClass, klass, TYPE_XEN_PT_DEVICE) +#define XEN_PT_DEVICE_GET_CLASS(obj) \ + OBJECT_GET_CLASS(XenPTDeviceClass, obj, TYPE_XEN_PT_DEVICE) + +typedef void (*XenPTQdevRealize)(DeviceState *qdev, Error **errp); + +typedef struct XenPTDeviceClass { + PCIDeviceClass parent_class; + XenPTQdevRealize pci_qdev_realize; +} XenPTDeviceClass; + uint32_t igd_read_opregion(XenPCIPassthroughState *s); +void xen_igd_reserve_slot(PCIBus *pci_bus); void igd_write_opregion(XenPCIPassthroughState *s, uint32_t val); void xen_igd_passthrough_isa_bridge_create(XenPCIPassthroughState *s, XenHostPCIDevice *dev); @@ -75,6 +88,13 @@ typedef int (*xen_pt_conf_byte_read) #define XEN_PCI_INTEL_OPREGION 0xfc +#define XEN_PCI_IGD_DOMAIN 0 +#define XEN_PCI_IGD_BUS 0 +#define XEN_PCI_IGD_DEV 2 +#define XEN_PCI_IGD_FN 0 +#define XEN_PCI_IGD_SLOT_MASK \ + (1UL << PCI_SLOT(PCI_DEVFN(XEN_PCI_IGD_DEV, XEN_PCI_IGD_FN))) + typedef enum { XEN_PT_GRP_TYPE_HARDWIRED = 0, /* 0 Hardwired reg group */ XEN_PT_GRP_TYPE_EMU, /* emul reg group */ diff --git a/hw/xen/xen_pt_stub.c b/hw/xen/xen_pt_stub.c index 2d8cac8d54..5c108446a8 100644 --- a/hw/xen/xen_pt_stub.c +++ b/hw/xen/xen_pt_stub.c @@ -20,3 +20,7 @@ void xen_igd_gfx_pt_set(bool value, Error **errp) error_setg(errp, "Xen PCI passthrough support not built in"); } } + +void xen_igd_reserve_slot(PCIBus *pci_bus) +{ +}
Intel specifies that the Intel IGD must occupy slot 2 on the PCI bus, as noted in docs/igd-assign.txt in the Qemu source code. Currently, when the xl toolstack is used to configure a Xen HVM guest with Intel IGD passthrough to the guest with the Qemu upstream device model, a Qemu emulated PCI device will occupy slot 2 and the Intel IGD will occupy a different slot. This problem often prevents the guest from booting. The only available workarounds are not good: Configure Xen HVM guests to use the old and no longer maintained Qemu traditional device model available from xenbits.xen.org which does reserve slot 2 for the Intel IGD or use the "pc" machine type instead of the "xenfv" machine type and add the xen platform device at slot 3 using a command line option instead of patching qemu to fix the "xenfv" machine type directly. The second workaround causes some degredation in startup performance such as a longer boot time and reduced resolution of the grub menu that is displayed on the monitor. This patch avoids that reduced startup performance when using the Qemu upstream device model for Xen HVM guests configured with the igd-passthru=on option. To implement this feature in the Qemu upstream device model for Xen HVM guests, introduce the following new functions, types, and macros: * XEN_PT_DEVICE_CLASS declaration, based on the existing TYPE_XEN_PT_DEVICE * XEN_PT_DEVICE_GET_CLASS macro helper function for XEN_PT_DEVICE_CLASS * typedef XenPTQdevRealize function pointer * XEN_PCI_IGD_SLOT_MASK, the value of slot_reserved_mask to reserve slot 2 * xen_igd_reserve_slot and xen_igd_clear_slot functions Michael Tsirkin: * Introduce XEN_PCI_IGD_DOMAIN, XEN_PCI_IGD_BUS, XEN_PCI_IGD_DEV, and XEN_PCI_IGD_FN - use them to compute the value of XEN_PCI_IGD_SLOT_MASK The new xen_igd_reserve_slot function uses the existing slot_reserved_mask member of PCIBus to reserve PCI slot 2 for Xen HVM guests configured using the xl toolstack with the gfx_passthru option enabled, which sets the igd-passthru=on option to Qemu for the Xen HVM machine type. The new xen_igd_reserve_slot function also needs to be implemented in hw/xen/xen_pt_stub.c to prevent FTBFS during the link stage for the case when Qemu is configured with --enable-xen and --disable-xen-pci-passthrough, in which case it does nothing. The new xen_igd_clear_slot function overrides qdev->realize of the parent PCI device class to enable the Intel IGD to occupy slot 2 on the PCI bus since slot 2 was reserved by xen_igd_reserve_slot when the PCI bus was created in hw/i386/pc_piix.c for the case when igd-passthru=on. Move the call to xen_host_pci_device_get, and the associated error handling, from xen_pt_realize to the new xen_igd_clear_slot function to initialize the device class and vendor values which enables the checks for the Intel IGD to succeed. The verification that the host device is an Intel IGD to be passed through is done by checking the domain, bus, slot, and function values as well as by checking that gfx_passthru is enabled, the device class is VGA, and the device vendor in Intel. Signed-off-by: Chuck Zmudzinski <brchuckz@aol.com> --- Notes that might be helpful to reviewers of patched code in hw/xen: The new functions and types are based on recommendations from Qemu docs: https://qemu.readthedocs.io/en/latest/devel/qom.html Notes that might be helpful to reviewers of patched code in hw/i386: The small patch to hw/i386/pc_piix.c is protected by CONFIG_XEN so it does not affect builds that do not have CONFIG_XEN defined. xen_igd_gfx_pt_enabled() in the patched hw/i386/pc_piix.c file is an existing function that is only true when Qemu is built with xen-pci-passthrough enabled and the administrator has configured the Xen HVM guest with Qemu's igd-passthru=on option. v2: Remove From: <email address> tag at top of commit message v3: Changed the test for the Intel IGD in xen_igd_clear_slot: if (is_igd_vga_passthrough(&s->real_device) && (s->real_device.vendor_id == PCI_VENDOR_ID_INTEL)) { is changed to if (xen_igd_gfx_pt_enabled() && (s->hostaddr.slot == 2) && (s->hostaddr.function == 0)) { I hoped that I could use the test in v2, since it matches the other tests for the Intel IGD in Qemu and Xen, but those tests do not work because the necessary data structures are not set with their values yet. So instead use the test that the administrator has enabled gfx_passthru and the device address on the host is 02.0. This test does detect the Intel IGD correctly. v4: Use brchuckz@aol.com instead of brchuckz@netscape.net for the author's email address to match the address used by the same author in commits be9c61da and c0e86b76 Change variable for XEN_PT_DEVICE_CLASS: xptc changed to xpdc v5: The patch of xen_pt.c was re-worked to allow a more consistent test for the Intel IGD that uses the same criteria as in other places. This involved moving the call to xen_host_pci_device_get from xen_pt_realize to xen_igd_clear_slot and updating the checks for the Intel IGD in xen_igd_clear_slot: if (xen_igd_gfx_pt_enabled() && (s->hostaddr.slot == 2) && (s->hostaddr.function == 0)) { is changed to if (is_igd_vga_passthrough(&s->real_device) && s->real_device.domain == 0 && s->real_device.bus == 0 && s->real_device.dev == 2 && s->real_device.func == 0 && s->real_device.vendor_id == PCI_VENDOR_ID_INTEL) { Added an explanation for the move of xen_host_pci_device_get from xen_pt_realize to xen_igd_clear_slot to the commit message. Rebase. v6: Fix logging by removing these lines from the move from xen_pt_realize to xen_igd_clear_slot that was done in v5: XEN_PT_LOG(d, "Assigning real physical device %02x:%02x.%d" " to devfn 0x%x\n", s->hostaddr.bus, s->hostaddr.slot, s->hostaddr.function, s->dev.devfn); This log needs to be in xen_pt_realize because s->dev.devfn is not set yet in xen_igd_clear_slot. v7: The v7 that was posted to the mailing list was incorrect. v8 is what v7 was intended to be. v8: Inhibit out of context log message and needless processing by adding 2 lines at the top of the new xen_igd_clear_slot function: if (!(pci_bus->slot_reserved_mask & XEN_PCI_IGD_SLOT_MASK)) return; Rebase. This removed an unnecessary header file from xen_pt.h v9: Move check for xen_igd_gfx_pt_enabled() from pc_piix.c to xen_pt.c Move #include "hw/pci/pci_bus.h" from xen_pt.h to xen_pt.c Introduce macros for the IGD devfn constants and use them to compute the value of XEN_PCI_IGD_SLOT_MASK Also use the new macros at an appropriate place in xen_pt_realize Add Cc: to stable - This has been broken for a long time, ever since support for igd-passthru was added to Qemu 7 years ago. Mention new macros in the commit message (Michael Tsirkin) N.B.: I could not follow the suggestion to move the statement pci_bus->slot_reserved_mask &= ~XEN_PCI_IGD_SLOT_MASK; to after pci_qdev_realize for symmetry. Doing that results in an error when creating the guest: libxl: error: libxl_qmp.c:1837:qmp_ev_parse_error_messages: Domain 4:PCI: slot 2 function 0 not available for xen-pci-passthrough, reserved libxl: error: libxl_pci.c:1809:device_pci_add_done: Domain 4:libxl__device_pci_add failed for PCI device 0:0:2.0 (rc -28) libxl: error: libxl_create.c:1921:domcreate_attach_devices: Domain 4:unable to add pci devices v10: Change in xen_pt.c at xen_igd_clear_slot from if (!(pci_bus->slot_reserved_mask & XEN_PCI_IGD_SLOT_MASK)) return; xen_host_pci_device_get(&s->real_device, s->hostaddr.domain, s->hostaddr.bus, s->hostaddr.slot, s->hostaddr.function, errp); if (*errp) { error_append_hint(errp, "Failed to \"open\" the real pci device"); return; } to: xen_host_pci_device_get(&s->real_device, s->hostaddr.domain, s->hostaddr.bus, s->hostaddr.slot, s->hostaddr.function, errp); if (*errp) { error_append_hint(errp, "Failed to \"open\" the real pci device"); return; } if (!(pci_bus->slot_reserved_mask & XEN_PCI_IGD_SLOT_MASK)) { xpdc->pci_qdev_realize(qdev, errp); return; } Testing shows this fixes the problem of xen_host_pci_device_get and xpdc->pci_qdev_realize not being called if xen_igd_clear_slot returns because the bit to reserve slot 2 in slot_reserved_mask is not set. Without this change, guest creation fails in the cases when the bit to reserve slot 2 in slot_reserved_mask is not set. Thanks, Stefano! Also, in addition to mentioning the workaround of using the traditional qemu device model available from xenbits.xen.org in the commit message, also mention in the commit message the workaround of using the "pc" machine type instead of the "xenfv" machine type, which results in reduced startup performance. Rebase. Add Igor Mammedov <imammedo@redhat.com> to Cc. v11: I noticed a style mistake that has been present in the past few versions that no one noticed. This version fixes it. No functional change in v11. I also did more tests on different guests such as guests that don't have igd-passthru=on set. No regressions were observed. The style mistake (missing braces) is fixed as follows: xen_pt.c at xen_igd_reserve_slot is changed from if (!xen_igd_gfx_pt_enabled()) return; to if (!xen_igd_gfx_pt_enabled()) { return; } hw/i386/pc_piix.c | 1 + hw/xen/xen_pt.c | 64 ++++++++++++++++++++++++++++++++++++-------- hw/xen/xen_pt.h | 20 ++++++++++++++ hw/xen/xen_pt_stub.c | 4 +++ 4 files changed, 78 insertions(+), 11 deletions(-)