@@ -60,6 +60,10 @@
((1UL << XUE_PSC_CSC) | (1UL << XUE_PSC_PRC) | (1UL << XUE_PSC_PLC) | \
(1UL << XUE_PSC_CEC))
+#define XUE_XHC_EXT_PORT_MAJOR(x) (((x) >> 24) & 0xff)
+#define PORT_RESET (1 << 4)
+#define PORT_CONNECT (1 << 0)
+
#define xue_debug(...) printk("xue debug: " __VA_ARGS__)
#define xue_alert(...) printk("xue alert: " __VA_ARGS__)
#define xue_error(...) printk("xue error: " __VA_ARGS__)
@@ -604,6 +608,68 @@ static void xue_init_strings(struct xue *xue, uint32_t *info)
info[8] = (4 << 24) | (30 << 16) | (8 << 8) | 6;
}
+static void xue_do_reset_debug_port(struct xue *xue, u32 id, u32 count)
+{
+ uint32_t *ops_reg;
+ uint32_t *portsc;
+ u32 val, cap_length;
+ int i;
+
+ cap_length = (*(uint32_t*)xue->xhc_mmio) & 0xff;
+ ops_reg = xue->xhc_mmio + cap_length;
+
+ id--;
+ for ( i = id; i < (id + count); i++ )
+ {
+ portsc = ops_reg + 0x100 + i * 0x4;
+ val = *portsc;
+ if ( !(val & PORT_CONNECT) )
+ *portsc = val | PORT_RESET;
+ }
+}
+
+
+static void xue_reset_debug_port(struct xue *xue)
+{
+ u32 val, port_offset, port_count;
+ uint32_t *xcap;
+ uint32_t next;
+ uint32_t id;
+ uint8_t *mmio = (uint8_t *)xue->xhc_mmio;
+ uint32_t *hccp1 = (uint32_t *)(mmio + 0x10);
+ const uint32_t PROTOCOL_ID = 0x2;
+
+ /**
+ * Paranoid check against a zero value. The spec mandates that
+ * at least one "supported protocol" capability must be implemented,
+ * so this should always be false.
+ */
+ if ( (*hccp1 & 0xFFFF0000) == 0 )
+ return;
+
+ xcap = (uint32_t *)(mmio + (((*hccp1 & 0xFFFF0000) >> 16) << 2));
+ next = (*xcap & 0xFF00) >> 8;
+ id = *xcap & 0xFF;
+
+ /* Look for "supported protocol" capability, major revision 3 */
+ for ( ; next; xcap += next, id = *xcap & 0xFF, next = (*xcap & 0xFF00) >> 8)
+ {
+ if ( id != PROTOCOL_ID && next )
+ continue;
+
+ if ( XUE_XHC_EXT_PORT_MAJOR(*xcap) != 0x3 )
+ continue;
+
+ /* extract ports offset and count from the capability structure */
+ val = *(xcap + 2);
+ port_offset = val & 0xff;
+ port_count = (val >> 8) & 0xff;
+
+ /* and reset them all */
+ xue_do_reset_debug_port(xue, port_offset, port_count);
+ }
+}
+
static void xue_dump(struct xue *xue)
{
struct xue_dbc_reg *r = xue->dbc_reg;
@@ -639,6 +705,10 @@ static void xue_enable_dbc(struct xue *xue)
while ( (reg->ctrl & (1UL << XUE_CTRL_DCE)) == 0 )
xue_sys_pause();
+ /* reset ports on initial open, to force re-enumerating by the host */
+ if ( !xue->open )
+ xue_reset_debug_port(xue);
+
wmb();
reg->portsc |= (1UL << XUE_PSC_PED);
wmb();
Reset ports, to force host system to re-enumerate devices. Otheriwse it will require the cable to be re-plugged, or will wait in the "configuring" state indefinitely. Trick and code copied from Linux: drivers/usb/early/xhci-dbc.c:xdbc_start()->xdbc_reset_debug_port() Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> --- xen/drivers/char/xue.c | 70 +++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 70 insertions(+)