[v3,1/2] x86/PIT: supply and use #define-s

Commit Message

Jan Beulich May 22, 2024, 12:59 p.m. UTC

Help reading of code programming the PIT by introducing constants for
control word, read back and latch commands, as well as status.

Requested-by: Jason Andryuk <[e-mail]>
Signed-off-by: Jan Beulich <[e-mail]>
---
v3: New.

Comments

Jason Andryuk May 22, 2024, 1:46 p.m. UTC | #1

On 2024-05-22 08:59, Jan Beulich wrote:
> Help reading of code programming the PIT by introducing constants for
> control word, read back and latch commands, as well as status.
> 
> Requested-by: Jason Andryuk <[e-mail]>
> Signed-off-by: Jan Beulich <[e-mail]>

Reviewed-by: Jason Andryuk <[e-mail]>

Thanks for making the switch.

Regards,
Jason

Patch

--- a/xen/arch/x86/apic.c
+++ b/xen/arch/x86/apic.c
@@ -983,7 +983,7 @@  static unsigned int __init get_8254_time
 
     /*spin_lock_irqsave(&i8253_lock, flags);*/
 
-    outb_p(0x00, PIT_MODE);
+    outb_p(PIT_LTCH_CH(0), PIT_MODE);
     count = inb_p(PIT_CH0);
     count |= inb_p(PIT_CH0) << 8;
 
--- a/xen/arch/x86/include/asm/time.h
+++ b/xen/arch/x86/include/asm/time.h
@@ -58,4 +58,38 @@  struct time_scale;
 void set_time_scale(struct time_scale *ts, u64 ticks_per_sec);
 u64 scale_delta(u64 delta, const struct time_scale *scale);
 
+/* Programmable Interval Timer (8254) */
+
+/* Timer Control Word */
+#define PIT_TCW_CH(n)         ((n) << 6)
+/* Lower bits also Timer Status. */
+#define PIT_RW_MSB            (1 << 5)
+#define PIT_RW_LSB            (1 << 4)
+#define PIT_RW_LSB_MSB        (PIT_RW_LSB | PIT_RW_MSB)
+#define PIT_MODE_EOC          (0 << 1)
+#define PIT_MODE_ONESHOT      (1 << 1)
+#define PIT_MODE_RATE_GEN     (2 << 1)
+#define PIT_MODE_SQUARE_WAVE  (3 << 1)
+#define PIT_MODE_SW_STROBE    (4 << 1)
+#define PIT_MODE_HW_STROBE    (5 << 1)
+#define PIT_BINARY            (0 << 0)
+#define PIT_BCD               (1 << 0)
+
+/* Read Back Command */
+#define PIT_RDB               PIT_TCW_CH(3)
+#define PIT_RDB_NO_COUNT      (1 << 5)
+#define PIT_RDB_NO_STATUS     (1 << 4)
+#define PIT_RDB_CH2           (1 << 3)
+#define PIT_RDB_CH1           (1 << 2)
+#define PIT_RDB_CH0           (1 << 1)
+#define PIT_RDB_RSVD          (1 << 0)
+
+/* Counter Latch Command */
+#define PIT_LTCH_CH(n)        PIT_TCW_CH(n)
+
+/* Timer Status */
+#define PIT_STATUS_OUT_PIN    (1 << 7)
+#define PIT_STATUS_NULL_COUNT (1 << 6)
+/* Lower bits match Timer Control Word. */
+
 #endif /* __X86_TIME_H__ */
--- a/xen/arch/x86/time.c
+++ b/xen/arch/x86/time.c
@@ -222,7 +222,7 @@  static void cf_check timer_interrupt(int
 
         spin_lock_irq(&pit_lock);
 
-        outb(0x80, PIT_MODE);
+        outb(PIT_LTCH_CH(2), PIT_MODE);
         count  = inb(PIT_CH2);
         count |= inb(PIT_CH2) << 8;
 
@@ -245,7 +245,8 @@  static void preinit_pit(void)
 {
     /* Set PIT channel 0 to HZ Hz. */
 #define LATCH (((CLOCK_TICK_RATE)+(HZ/2))/HZ)
-    outb_p(0x34, PIT_MODE);        /* binary, mode 2, LSB/MSB, ch 0 */
+    outb_p(PIT_TCW_CH(0) | PIT_RW_LSB_MSB | PIT_MODE_RATE_GEN | PIT_BINARY,
+           PIT_MODE);
     outb_p(LATCH & 0xff, PIT_CH0); /* LSB */
     outb(LATCH >> 8, PIT_CH0);     /* MSB */
 #undef LATCH
@@ -356,7 +357,7 @@  static u64 cf_check read_pit_count(void)
 
     spin_lock_irqsave(&pit_lock, flags);
 
-    outb(0x80, PIT_MODE);
+    outb(PIT_LTCH_CH(2), PIT_MODE);
     count16  = inb(PIT_CH2);
     count16 |= inb(PIT_CH2) << 8;
 
@@ -383,7 +384,8 @@  static s64 __init cf_check init_pit(stru
      */
 #define CALIBRATE_LATCH CALIBRATE_VALUE(CLOCK_TICK_RATE)
     BUILD_BUG_ON(CALIBRATE_LATCH >> 16);
-    outb(0xb0, PIT_MODE);                  /* binary, mode 0, LSB/MSB, Ch 2 */
+    outb(PIT_TCW_CH(2) | PIT_RW_LSB_MSB | PIT_MODE_EOC | PIT_BINARY,
+         PIT_MODE);
     outb(CALIBRATE_LATCH & 0xff, PIT_CH2); /* LSB of count */
     outb(CALIBRATE_LATCH >> 8, PIT_CH2);   /* MSB of count */
 #undef CALIBRATE_LATCH
@@ -408,7 +410,8 @@  static s64 __init cf_check init_pit(stru
 static void cf_check resume_pit(struct platform_timesource *pts)
 {
     /* Set CTC channel 2 to mode 0 again; initial value does not matter. */
-    outb(0xb0, PIT_MODE); /* binary, mode 0, LSB/MSB, Ch 2 */
+    outb(PIT_TCW_CH(2) | PIT_RW_LSB_MSB | PIT_MODE_EOC | PIT_BINARY,
+         PIT_MODE);
     outb(0, PIT_CH2);     /* LSB of count */
     outb(0, PIT_CH2);     /* MSB of count */
 }
@@ -2456,7 +2459,8 @@  static int _disable_pit_irq(bool init)
     }
 
     /* Disable PIT CH0 timer interrupt. */
-    outb_p(0x30, PIT_MODE);
+    outb_p(PIT_TCW_CH(0) | PIT_RW_LSB_MSB | PIT_MODE_EOC | PIT_BINARY,
+           PIT_MODE);
     outb_p(0, PIT_CH0);
     outb_p(0, PIT_CH0);
 
@@ -2562,17 +2566,18 @@  int hwdom_pit_access(struct ioreq *ioreq
     case PIT_MODE:
         if ( ioreq->dir == IOREQ_READ )
             return 0; /* urk! */
-        switch ( ioreq->data & 0xc0 )
+        switch ( ioreq->data & PIT_TCW_CH(3) )
         {
-        case 0xc0: /* Read Back */
-            if ( ioreq->data & 0x08 )    /* Select Channel 2? */
-                outb(ioreq->data & 0xf8, PIT_MODE);
-            if ( !(ioreq->data & 0x06) ) /* Select Channel 0/1? */
+        case PIT_RDB: /* Read Back */
+            if ( ioreq->data & PIT_RDB_CH2 )
+                outb(ioreq->data & ~(PIT_RDB_CH1 | PIT_RDB_CH0 | PIT_RDB_RSVD),
+                     PIT_MODE);
+            if ( !(ioreq->data & (PIT_RDB_CH0 | PIT_RDB_CH1)) )
                 return 1; /* no - we're done */
             /* Filter Channel 2 and reserved bit 0. */
-            ioreq->data &= ~0x09;
+            ioreq->data &= ~(PIT_RDB_CH2 | PIT_RDB_RSVD);
             return 0; /* emulate ch0/1 readback */
-        case 0x80: /* Select Counter 2 */
+        case PIT_TCW_CH(2):
             outb(ioreq->data, PIT_MODE);
             return 1;
         }