Message ID | 20180620084114.25648-1-zlang@redhat.com (mailing list archive) |
---|---|
State | Superseded, archived |
Headers | show |
On Wed, Jun 20, 2018 at 04:41:12PM +0800, Zorro Lang wrote: > Duperemove is a tool for finding duplicated extents and submitting > them for deduplication, and it supports XFS. This case trys to > verify the integrity of XFS after running duperemove. > > Signed-off-by: Zorro Lang <zlang@redhat.com> > --- > > Thanks for Eryu's review. > > V2 changed $TEST_DIR/${seq}md5.sum to $tmp.md5sum. > > I didn't move this case to generic, due to duperemove tool only supports > Btrfs and XFS for now. > > Thanks, > Zorro > > > common/config | 1 + > tests/shared/008 | 79 ++++++++++++++++++++++++++++++++++++++++++++++++++++ > tests/shared/008.out | 3 ++ > tests/shared/group | 1 + > 4 files changed, 84 insertions(+) > create mode 100755 tests/shared/008 > create mode 100644 tests/shared/008.out > > diff --git a/common/config b/common/config > index 09e7ffee..d02d6ed5 100644 > --- a/common/config > +++ b/common/config > @@ -192,6 +192,7 @@ export SETCAP_PROG="$(type -P setcap)" > export GETCAP_PROG="$(type -P getcap)" > export CHECKBASHISMS_PROG="$(type -P checkbashisms)" > export XFS_INFO_PROG="$(type -P xfs_info)" > +export DUPEREMOVE_PROG="$(type -P duperemove)" > > # use 'udevadm settle' or 'udevsettle' to wait for lv to be settled. > # newer systems have udevadm command but older systems like RHEL5 don't. > diff --git a/tests/shared/008 b/tests/shared/008 > new file mode 100755 > index 00000000..a28f5cc1 > --- /dev/null > +++ b/tests/shared/008 > @@ -0,0 +1,79 @@ > +#! /bin/bash > +# FS QA Test 008 > +# > +# Dedupe a single big file and verify integrity > +# > +#----------------------------------------------------------------------- > +# Copyright (c) 2018 Red Hat Inc. All Rights Reserved. > +# > +# This program is free software; you can redistribute it and/or > +# modify it under the terms of the GNU General Public License as > +# published by the Free Software Foundation. > +# > +# This program is distributed in the hope that it would be useful, > +# but WITHOUT ANY WARRANTY; without even the implied warranty of > +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > +# GNU General Public License for more details. > +# > +# You should have received a copy of the GNU General Public License > +# along with this program; if not, write the Free Software Foundation, > +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA This probably could be converted to SPDX, though Eryu will be the decider <cough> about if/when that goes in. Otherwise looks decent. Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> --D > +#----------------------------------------------------------------------- > +# > + > +seq=`basename $0` > +seqres=$RESULT_DIR/$seq > +echo "QA output created by $seq" > + > +here=`pwd` > +tmp=/tmp/$$ > +status=1 # failure is the default! > +trap "_cleanup; exit \$status" 0 1 2 3 15 > + > +_cleanup() > +{ > + cd / > + rm -f $tmp.* > +} > + > +# get standard environment, filters and checks > +. ./common/rc > +. ./common/filter > +. ./common/reflink > + > +# remove previous $seqres.full before test > +rm -f $seqres.full > + > +# duperemove only supports btrfs and xfs (with reflink feature). > +# Add other filesystems if it supports more later. > +_supported_fs xfs btrfs > +_supported_os Linux > +_require_scratch_dedupe > +_require_command "$DUPEREMOVE_PROG" duperemove > + > +fssize=$((2 * 1024 * 1024 * 1024)) > +_scratch_mkfs_sized $fssize > $seqres.full 2>&1 > +_scratch_mount >> $seqres.full 2>&1 > + > +# fill the fs with a big file has same contents > +$XFS_IO_PROG -f -c "pwrite -S 0x55 0 $fssize" $SCRATCH_MNT/${seq}.file \ > + >> $seqres.full 2>&1 > +md5sum $SCRATCH_MNT/${seq}.file > ${tmp}.md5sum > + > +echo "= before cycle mount =" > +# Dedupe with 1M blocksize > +$DUPEREMOVE_PROG -dr --dedupe-options=same -b 1048576 $SCRATCH_MNT/ >>$seqres.full 2>&1 > +# Verify integrity > +md5sum -c --quiet ${tmp}.md5sum > +# Dedupe with 64k blocksize > +$DUPEREMOVE_PROG -dr --dedupe-options=same -b 65536 $SCRATCH_MNT/ >>$seqres.full 2>&1 > +# Verify integrity again > +md5sum -c --quiet ${tmp}.md5sum > + > +# umount and mount again, verify pagecache contents don't mutate > +_scratch_cycle_mount > +echo "= after cycle mount =" > +md5sum -c --quiet ${tmp}.md5sum > + > +status=0 > +exit > diff --git a/tests/shared/008.out b/tests/shared/008.out > new file mode 100644 > index 00000000..f29d478f > --- /dev/null > +++ b/tests/shared/008.out > @@ -0,0 +1,3 @@ > +QA output created by 008 > += before cycle mount = > += after cycle mount = > diff --git a/tests/shared/group b/tests/shared/group > index b3663a03..49ffa8dd 100644 > --- a/tests/shared/group > +++ b/tests/shared/group > @@ -10,6 +10,7 @@ > 005 dangerous_fuzzers > 006 auto enospc > 007 dangerous_fuzzers > +008 auto stress dedupe > 032 mkfs auto quick > 272 auto enospc rw > 289 auto quick > -- > 2.14.4 > > -- > To unsubscribe from this list: send the line "unsubscribe fstests" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-xfs" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/common/config b/common/config index 09e7ffee..d02d6ed5 100644 --- a/common/config +++ b/common/config @@ -192,6 +192,7 @@ export SETCAP_PROG="$(type -P setcap)" export GETCAP_PROG="$(type -P getcap)" export CHECKBASHISMS_PROG="$(type -P checkbashisms)" export XFS_INFO_PROG="$(type -P xfs_info)" +export DUPEREMOVE_PROG="$(type -P duperemove)" # use 'udevadm settle' or 'udevsettle' to wait for lv to be settled. # newer systems have udevadm command but older systems like RHEL5 don't. diff --git a/tests/shared/008 b/tests/shared/008 new file mode 100755 index 00000000..a28f5cc1 --- /dev/null +++ b/tests/shared/008 @@ -0,0 +1,79 @@ +#! /bin/bash +# FS QA Test 008 +# +# Dedupe a single big file and verify integrity +# +#----------------------------------------------------------------------- +# Copyright (c) 2018 Red Hat Inc. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +#----------------------------------------------------------------------- +# + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -f $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/reflink + +# remove previous $seqres.full before test +rm -f $seqres.full + +# duperemove only supports btrfs and xfs (with reflink feature). +# Add other filesystems if it supports more later. +_supported_fs xfs btrfs +_supported_os Linux +_require_scratch_dedupe +_require_command "$DUPEREMOVE_PROG" duperemove + +fssize=$((2 * 1024 * 1024 * 1024)) +_scratch_mkfs_sized $fssize > $seqres.full 2>&1 +_scratch_mount >> $seqres.full 2>&1 + +# fill the fs with a big file has same contents +$XFS_IO_PROG -f -c "pwrite -S 0x55 0 $fssize" $SCRATCH_MNT/${seq}.file \ + >> $seqres.full 2>&1 +md5sum $SCRATCH_MNT/${seq}.file > ${tmp}.md5sum + +echo "= before cycle mount =" +# Dedupe with 1M blocksize +$DUPEREMOVE_PROG -dr --dedupe-options=same -b 1048576 $SCRATCH_MNT/ >>$seqres.full 2>&1 +# Verify integrity +md5sum -c --quiet ${tmp}.md5sum +# Dedupe with 64k blocksize +$DUPEREMOVE_PROG -dr --dedupe-options=same -b 65536 $SCRATCH_MNT/ >>$seqres.full 2>&1 +# Verify integrity again +md5sum -c --quiet ${tmp}.md5sum + +# umount and mount again, verify pagecache contents don't mutate +_scratch_cycle_mount +echo "= after cycle mount =" +md5sum -c --quiet ${tmp}.md5sum + +status=0 +exit diff --git a/tests/shared/008.out b/tests/shared/008.out new file mode 100644 index 00000000..f29d478f --- /dev/null +++ b/tests/shared/008.out @@ -0,0 +1,3 @@ +QA output created by 008 += before cycle mount = += after cycle mount = diff --git a/tests/shared/group b/tests/shared/group index b3663a03..49ffa8dd 100644 --- a/tests/shared/group +++ b/tests/shared/group @@ -10,6 +10,7 @@ 005 dangerous_fuzzers 006 auto enospc 007 dangerous_fuzzers +008 auto stress dedupe 032 mkfs auto quick 272 auto enospc rw 289 auto quick
Duperemove is a tool for finding duplicated extents and submitting them for deduplication, and it supports XFS. This case trys to verify the integrity of XFS after running duperemove. Signed-off-by: Zorro Lang <zlang@redhat.com> --- Thanks for Eryu's review. V2 changed $TEST_DIR/${seq}md5.sum to $tmp.md5sum. I didn't move this case to generic, due to duperemove tool only supports Btrfs and XFS for now. Thanks, Zorro common/config | 1 + tests/shared/008 | 79 ++++++++++++++++++++++++++++++++++++++++++++++++++++ tests/shared/008.out | 3 ++ tests/shared/group | 1 + 4 files changed, 84 insertions(+) create mode 100755 tests/shared/008 create mode 100644 tests/shared/008.out