diff mbox series

[1/9] fs: Enable bmap() function to properly return errors

Message ID 20190808082744.31405-2-cmaiolino@redhat.com (mailing list archive)
State Superseded, archived
Headers show
Series New ->fiemap infrastructure and ->bmap removal | expand

Commit Message

Carlos Maiolino Aug. 8, 2019, 8:27 a.m. UTC
By now, bmap() will either return the physical block number related to
the requested file offset or 0 in case of error or the requested offset
maps into a hole.
This patch makes the needed changes to enable bmap() to proper return
errors, using the return value as an error return, and now, a pointer
must be passed to bmap() to be filled with the mapped physical block.

It will change the behavior of bmap() on return:

- negative value in case of error
- zero on success or map fell into a hole

In case of a hole, the *block will be zero too

Since this is a prep patch, by now, the only error return is -EINVAL if
->bmap doesn't exist.

Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
---

Changelog:

	V5:
		- Rebasing against 5.3 required changes to the f2fs
		  check_swap_activate() function

 drivers/md/md-bitmap.c | 16 ++++++++++------
 fs/f2fs/data.c         | 16 +++++++++++-----
 fs/inode.c             | 30 +++++++++++++++++-------------
 fs/jbd2/journal.c      | 22 +++++++++++++++-------
 include/linux/fs.h     |  2 +-
 mm/page_io.c           | 11 +++++++----
 6 files changed, 61 insertions(+), 36 deletions(-)

Comments

Christoph Hellwig Aug. 14, 2019, 11:14 a.m. UTC | #1
Just curious from looking this again - shoudn't the 0 block be turned
into an error by the bmap() function?  At least for the legacy ->bmap
case so that we don't have to carry this cruft around.
Carlos Maiolino Aug. 20, 2019, 11:36 a.m. UTC | #2
On Wed, Aug 14, 2019 at 01:14:35PM +0200, Christoph Hellwig wrote:
> Just curious from looking this again - shoudn't the 0 block be turned
> into an error by the bmap() function?  At least for the legacy ->bmap
> case so that we don't have to carry this cruft around.

I don't think so, this patch does not change the bmap interface on the
filesystems itself, and at this point, we don't have a way to distinguish
between a hole and an error from the filesystem's bmap() interface. The main
idea of enabling bmap() to return errors, was to take advantage of the fiemap
errors (in another patch in this series).

Although, I do agree that this also opens the possibility to change the
interface itself, and make ->bmap calls to really return errors, but this will
require a bigger change in all users of ->bmap(). I can work on that, but I'd
prefer to change this interface in another patchset, after this one is merged.
So, we can work only on those filesystems where ->bmap() will still be a thing.

Cheers.
diff mbox series

Patch

diff --git a/drivers/md/md-bitmap.c b/drivers/md/md-bitmap.c
index b092c7b5282f..bfb7fddd4f1b 100644
--- a/drivers/md/md-bitmap.c
+++ b/drivers/md/md-bitmap.c
@@ -364,7 +364,7 @@  static int read_page(struct file *file, unsigned long index,
 	int ret = 0;
 	struct inode *inode = file_inode(file);
 	struct buffer_head *bh;
-	sector_t block;
+	sector_t block, blk_cur;
 
 	pr_debug("read bitmap file (%dB @ %llu)\n", (int)PAGE_SIZE,
 		 (unsigned long long)index << PAGE_SHIFT);
@@ -375,17 +375,21 @@  static int read_page(struct file *file, unsigned long index,
 		goto out;
 	}
 	attach_page_buffers(page, bh);
-	block = index << (PAGE_SHIFT - inode->i_blkbits);
+	blk_cur = index << (PAGE_SHIFT - inode->i_blkbits);
 	while (bh) {
+		block = blk_cur;
+
 		if (count == 0)
 			bh->b_blocknr = 0;
 		else {
-			bh->b_blocknr = bmap(inode, block);
-			if (bh->b_blocknr == 0) {
-				/* Cannot use this file! */
+			ret = bmap(inode, &block);
+			if (ret || !block) {
 				ret = -EINVAL;
+				bh->b_blocknr = 0;
 				goto out;
 			}
+
+			bh->b_blocknr = block;
 			bh->b_bdev = inode->i_sb->s_bdev;
 			if (count < (1<<inode->i_blkbits))
 				count = 0;
@@ -399,7 +403,7 @@  static int read_page(struct file *file, unsigned long index,
 			set_buffer_mapped(bh);
 			submit_bh(REQ_OP_READ, 0, bh);
 		}
-		block++;
+		blk_cur++;
 		bh = bh->b_this_page;
 	}
 	page->index = index;
diff --git a/fs/f2fs/data.c b/fs/f2fs/data.c
index abbf14e9bd72..4f5afff39f2a 100644
--- a/fs/f2fs/data.c
+++ b/fs/f2fs/data.c
@@ -2979,12 +2979,16 @@  static int check_swap_activate(struct file *swap_file, unsigned int max)
 	while ((probe_block + blocks_per_page) <= last_block && page_no < max) {
 		unsigned block_in_page;
 		sector_t first_block;
+		sector_t block = 0;
+		int	 err = 0;
 
 		cond_resched();
 
-		first_block = bmap(inode, probe_block);
-		if (first_block == 0)
+		block = probe_block;
+		err = bmap(inode, &block);
+		if (err || !block)
 			goto bad_bmap;
+		first_block = block;
 
 		/*
 		 * It must be PAGE_SIZE aligned on-disk
@@ -2996,11 +3000,13 @@  static int check_swap_activate(struct file *swap_file, unsigned int max)
 
 		for (block_in_page = 1; block_in_page < blocks_per_page;
 					block_in_page++) {
-			sector_t block;
 
-			block = bmap(inode, probe_block + block_in_page);
-			if (block == 0)
+			block = probe_block + block_in_page;
+			err = bmap(inode, &block);
+
+			if (err || !block)
 				goto bad_bmap;
+
 			if (block != first_block + block_in_page) {
 				/* Discontiguity */
 				probe_block++;
diff --git a/fs/inode.c b/fs/inode.c
index 0f1e3b563c47..5dfe5e4bfa50 100644
--- a/fs/inode.c
+++ b/fs/inode.c
@@ -1590,21 +1590,25 @@  EXPORT_SYMBOL(iput);
 
 /**
  *	bmap	- find a block number in a file
- *	@inode: inode of file
- *	@block: block to find
- *
- *	Returns the block number on the device holding the inode that
- *	is the disk block number for the block of the file requested.
- *	That is, asked for block 4 of inode 1 the function will return the
- *	disk block relative to the disk start that holds that block of the
- *	file.
+ *	@inode:  inode owning the block number being requested
+ *	@*block: pointer containing the block to find
+ *
+ *	Replaces the value in *block with the block number on the device holding
+ *	corresponding to the requested block number in the file.
+ *	That is, asked for block 4 of inode 1 the function will replace the
+ *	4 in *block, with disk block relative to the disk start that holds that
+ *	block of the file.
+ *
+ *	Returns -EINVAL in case of error, 0 otherwise. If mapping falls into a
+ *	hole, returns 0 and *block is also set to 0.
  */
-sector_t bmap(struct inode *inode, sector_t block)
+int bmap(struct inode *inode, sector_t *block)
 {
-	sector_t res = 0;
-	if (inode->i_mapping->a_ops->bmap)
-		res = inode->i_mapping->a_ops->bmap(inode->i_mapping, block);
-	return res;
+	if (!inode->i_mapping->a_ops->bmap)
+		return -EINVAL;
+
+	*block = inode->i_mapping->a_ops->bmap(inode->i_mapping, *block);
+	return 0;
 }
 EXPORT_SYMBOL(bmap);
 
diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c
index 953990eb70a9..c35252897f40 100644
--- a/fs/jbd2/journal.c
+++ b/fs/jbd2/journal.c
@@ -797,18 +797,23 @@  int jbd2_journal_bmap(journal_t *journal, unsigned long blocknr,
 {
 	int err = 0;
 	unsigned long long ret;
+	sector_t block = 0;
 
 	if (journal->j_inode) {
-		ret = bmap(journal->j_inode, blocknr);
-		if (ret)
-			*retp = ret;
-		else {
+		block = blocknr;
+		ret = bmap(journal->j_inode, &block);
+
+		if (ret || !block) {
 			printk(KERN_ALERT "%s: journal block not found "
 					"at offset %lu on %s\n",
 			       __func__, blocknr, journal->j_devname);
 			err = -EIO;
 			__journal_abort_soft(journal, err);
+
+		} else {
+			*retp = block;
 		}
+
 	} else {
 		*retp = blocknr; /* +journal->j_blk_offset */
 	}
@@ -1234,11 +1239,14 @@  journal_t *jbd2_journal_init_dev(struct block_device *bdev,
 journal_t *jbd2_journal_init_inode(struct inode *inode)
 {
 	journal_t *journal;
+	sector_t blocknr;
 	char *p;
-	unsigned long long blocknr;
+	int err = 0;
+
+	blocknr = 0;
+	err = bmap(inode, &blocknr);
 
-	blocknr = bmap(inode, 0);
-	if (!blocknr) {
+	if (err || !blocknr) {
 		pr_err("%s: Cannot locate journal superblock\n",
 			__func__);
 		return NULL;
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 56b8e358af5c..934d7c57eec6 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -2803,7 +2803,7 @@  static inline ssize_t generic_write_sync(struct kiocb *iocb, ssize_t count)
 extern void emergency_sync(void);
 extern void emergency_remount(void);
 #ifdef CONFIG_BLOCK
-extern sector_t bmap(struct inode *, sector_t);
+extern int bmap(struct inode *, sector_t *);
 #endif
 extern int notify_change(struct dentry *, struct iattr *, struct inode **);
 extern int inode_permission(struct inode *, int);
diff --git a/mm/page_io.c b/mm/page_io.c
index 24ee600f9131..dfc55616ff17 100644
--- a/mm/page_io.c
+++ b/mm/page_io.c
@@ -176,8 +176,9 @@  int generic_swapfile_activate(struct swap_info_struct *sis,
 
 		cond_resched();
 
-		first_block = bmap(inode, probe_block);
-		if (first_block == 0)
+		first_block = probe_block;
+		ret = bmap(inode, &first_block);
+		if (ret || !first_block)
 			goto bad_bmap;
 
 		/*
@@ -192,9 +193,11 @@  int generic_swapfile_activate(struct swap_info_struct *sis,
 					block_in_page++) {
 			sector_t block;
 
-			block = bmap(inode, probe_block + block_in_page);
-			if (block == 0)
+			block = probe_block + block_in_page;
+			ret = bmap(inode, &block);
+			if (ret || !block)
 				goto bad_bmap;
+
 			if (block != first_block + block_in_page) {
 				/* Discontiguity */
 				probe_block++;