From patchwork Wed Oct 2 15:17:14 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Benjamin GAIGNARD X-Patchwork-Id: 11173713 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 82B4E112B for ; Fri, 4 Oct 2019 07:40:23 +0000 (UTC) Received: from gabe.freedesktop.org (gabe.freedesktop.org [131.252.210.177]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id 6AB6A22469 for ; Fri, 4 Oct 2019 07:40:23 +0000 (UTC) DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org 6AB6A22469 Authentication-Results: mail.kernel.org; dmarc=none (p=none dis=none) header.from=st.com Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=dri-devel-bounces@lists.freedesktop.org Received: from gabe.freedesktop.org (localhost [127.0.0.1]) by gabe.freedesktop.org (Postfix) with ESMTP id 24B226EAE3; Fri, 4 Oct 2019 07:39:14 +0000 (UTC) X-Original-To: dri-devel@lists.freedesktop.org Delivered-To: dri-devel@lists.freedesktop.org Received: from mx07-00178001.pphosted.com (mx08-00178001.pphosted.com [91.207.212.93]) by gabe.freedesktop.org (Postfix) with ESMTPS id 9CA956E181 for ; Wed, 2 Oct 2019 15:17:31 +0000 (UTC) Received: from pps.filterd (m0046661.ppops.net [127.0.0.1]) by mx08-00178001.pphosted.com (8.16.0.42/8.16.0.42) with SMTP id x92F2or9009075; Wed, 2 Oct 2019 17:17:26 +0200 Received: from beta.dmz-ap.st.com (beta.dmz-ap.st.com [138.198.100.35]) by mx08-00178001.pphosted.com with ESMTP id 2v9xdgya1n-1 (version=TLSv1 cipher=ECDHE-RSA-AES256-SHA bits=256 verify=NOT); Wed, 02 Oct 2019 17:17:25 +0200 Received: from euls16034.sgp.st.com (euls16034.sgp.st.com [10.75.44.20]) by beta.dmz-ap.st.com (STMicroelectronics) with ESMTP id 82B564B; Wed, 2 Oct 2019 15:17:19 +0000 (GMT) Received: from Webmail-eu.st.com (Safex1hubcas23.st.com [10.75.90.46]) by euls16034.sgp.st.com (STMicroelectronics) with ESMTP id 9E6F92D376B; Wed, 2 Oct 2019 17:17:18 +0200 (CEST) Received: from SAFEX1HUBCAS22.st.com (10.75.90.92) by SAFEX1HUBCAS23.st.com (10.75.90.46) with Microsoft SMTP Server (TLS) id 14.3.439.0; Wed, 2 Oct 2019 17:17:18 +0200 Received: from localhost (10.201.20.122) by Webmail-ga.st.com (10.75.90.48) with Microsoft SMTP Server (TLS) id 14.3.439.0; Wed, 2 Oct 2019 17:17:18 +0200 From: Benjamin Gaignard To: , , , , , , Subject: [PATCH] dt-bindings: display: Convert stm32 display bindings to json-schema Date: Wed, 2 Oct 2019 17:17:14 +0200 Message-ID: <20191002151714.15813-1-benjamin.gaignard@st.com> X-Mailer: git-send-email 2.15.0 MIME-Version: 1.0 X-Originating-IP: [10.201.20.122] X-Proofpoint-Virus-Version: vendor=fsecure engine=2.50.10434:6.0.95,1.0.8 definitions=2019-10-02_07:2019-10-01,2019-10-02 signatures=0 X-Mailman-Approved-At: Fri, 04 Oct 2019 07:38:50 +0000 X-Mailman-Original-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=st.com; h=from : to : cc : subject : date : message-id : mime-version : content-type; s=STMicroelectronics; bh=SveaAp06meE/xmppWZqgaq1Du+6vAdFQklTVaWKGGEA=; b=WzoWnBQV2ZOWwgXe349OgB3klse5yChLEQfP7waFso1G1nbOFZOtATjK6mVp3M5BMd1L aM/WIu01slvHy4a3YBheueg1i+hcTh3m5uGSp6wzssrRP5fNYixEPt5l62Vo1Nj4QGZu 75akkqyjCDo/pe1P7Pu2Eq4mK0VVueakykpOygFkzwaiuewfr1VC/Yih9fF6kShy2D4O wDe7EZokH+tS3EboCPSiGYb0macFPikJaZYGmg5YdKQFWoY1dRfVjhEJEY47hkemY2kK lxrdK3qfj/d4pX1s59h+T1DUMlkFLnNAeEFLQBZqvZIK/tuU04pFYfDYrRBFWyDrQtPq 5w== X-BeenThere: dri-devel@lists.freedesktop.org X-Mailman-Version: 2.1.23 Precedence: list List-Id: Direct Rendering Infrastructure - Development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: devicetree@vger.kernel.org, Benjamin Gaignard , linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org, linux-stm32@st-md-mailman.stormreply.com, linux-arm-kernel@lists.infradead.org Errors-To: dri-devel-bounces@lists.freedesktop.org Sender: "dri-devel" Convert the STM32 display binding to DT schema format using json-schema. Split the original bindings in two yaml files: - one for display controller (ltdc) - one for DSI controller Signed-off-by: Benjamin Gaignard --- .../devicetree/bindings/display/st,stm32-dsi.yaml | 130 +++++++++++++++++++ .../devicetree/bindings/display/st,stm32-ltdc.txt | 144 --------------------- .../devicetree/bindings/display/st,stm32-ltdc.yaml | 82 ++++++++++++ 3 files changed, 212 insertions(+), 144 deletions(-) create mode 100644 Documentation/devicetree/bindings/display/st,stm32-dsi.yaml delete mode 100644 Documentation/devicetree/bindings/display/st,stm32-ltdc.txt create mode 100644 Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml diff --git a/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml b/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml new file mode 100644 index 000000000000..8143cf6f0ce7 --- /dev/null +++ b/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml @@ -0,0 +1,130 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/st,stm32-dsi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectronics STM32 DSI host controller + +maintainers: + - Philippe Cornu + - Yannick Fertre + +properties: + "#address-cells": true + "#size-cells": true + + compatible: + const: st,stm32-dsi + + reg: + maxItems: 1 + + clocks: + items: + - description: Module Clock + - description: DSI bus clock + - description: Pixel clock + minItems: 2 + maxItems: 3 + + clock-names: + items: + - const: pclk + - const: ref + - const: px_clk + minItems: 2 + maxItems: 3 + + resets: + maxItems: 1 + + reset-names: + items: + - const: apb + + phy-dsi-supply: + maxItems: 1 + description: + Phandle of the regulator that provides the supply voltage. + + ports: + type: object + description: + A node containing DSI input & output port nodes with endpoint + definitions as documented in + Documentation/devicetree/bindings/media/video-interfaces.txt + Documentation/devicetree/bindings/graph.txt + + port: + type: object + description: + "A port node with endpoint definitions as defined in + Documentation/devicetree/bindings/media/video-interfaces.txt. + port@0: DSI input port node, connected to the ltdc rgb output port. + port@1: DSI output port node, connected to a panel or a bridge input port" + +required: + - "#address-cells" + - "#size-cells" + - compatible + - reg + - clocks + - clock-names + - resets + - ports + +examples: + - | + #include + #include + #include + #include + dsi: dsi@5a000000 { + compatible = "st,stm32-dsi"; + reg = <0x5a000000 0x800>; + clocks = <&rcc DSI_K>, <&clk_hse>, <&rcc DSI_PX>; + clock-names = "pclk", "ref", "px_clk"; + resets = <&rcc DSI_R>; + reset-names = "apb"; + phy-dsi-supply = <®18>; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi_in: endpoint { + remote-endpoint = <<dc_ep1_out>; + }; + }; + + port@1 { + reg = <1>; + dsi_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + + panel { + compatible = "orisetech,otm8009a"; + reg = <0>; + reset-gpios = <&gpioe 4 GPIO_ACTIVE_LOW>; + power-supply = <&v3v3>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + }; + }; + +... + + diff --git a/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt b/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt deleted file mode 100644 index 60c54da4e526..000000000000 --- a/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt +++ /dev/null @@ -1,144 +0,0 @@ -* STMicroelectronics STM32 lcd-tft display controller - -- ltdc: lcd-tft display controller host - Required properties: - - compatible: "st,stm32-ltdc" - - reg: Physical base address of the IP registers and length of memory mapped region. - - clocks: A list of phandle + clock-specifier pairs, one for each - entry in 'clock-names'. - - clock-names: A list of clock names. For ltdc it should contain: - - "lcd" for the clock feeding the output pixel clock & IP clock. - - resets: reset to be used by the device (defined by use of RCC macro). - Required nodes: - - Video port for DPI RGB output: ltdc has one video port with up to 2 - endpoints: - - for external dpi rgb panel or bridge, using gpios. - - for internal dpi input of the MIPI DSI host controller. - Note: These 2 endpoints cannot be activated simultaneously. - -* STMicroelectronics STM32 DSI controller specific extensions to Synopsys - DesignWare MIPI DSI host controller - -The STMicroelectronics STM32 DSI controller uses the Synopsys DesignWare MIPI -DSI host controller. For all mandatory properties & nodes, please refer -to the related documentation in [5]. - -Mandatory properties specific to STM32 DSI: -- #address-cells: Should be <1>. -- #size-cells: Should be <0>. -- compatible: "st,stm32-dsi". -- clock-names: - - phy pll reference clock string name, must be "ref". -- resets: see [5]. -- reset-names: see [5]. - -Mandatory nodes specific to STM32 DSI: -- ports: A node containing DSI input & output port nodes with endpoint - definitions as documented in [3] & [4]. - - port@0: DSI input port node, connected to the ltdc rgb output port. - - port@1: DSI output port node, connected to a panel or a bridge input port. -- panel or bridge node: A node containing the panel or bridge description as - documented in [6]. - - port: panel or bridge port node, connected to the DSI output port (port@1). -Optional properties: -- phy-dsi-supply: phandle of the regulator that provides the supply voltage. - -Note: You can find more documentation in the following references -[1] Documentation/devicetree/bindings/clock/clock-bindings.txt -[2] Documentation/devicetree/bindings/reset/reset.txt -[3] Documentation/devicetree/bindings/media/video-interfaces.txt -[4] Documentation/devicetree/bindings/graph.txt -[5] Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt -[6] Documentation/devicetree/bindings/display/mipi-dsi-bus.txt - -Example 1: RGB panel -/ { - ... - soc { - ... - ltdc: display-controller@40016800 { - compatible = "st,stm32-ltdc"; - reg = <0x40016800 0x200>; - interrupts = <88>, <89>; - resets = <&rcc STM32F4_APB2_RESET(LTDC)>; - clocks = <&rcc 1 CLK_LCD>; - clock-names = "lcd"; - - port { - ltdc_out_rgb: endpoint { - }; - }; - }; - }; -}; - -Example 2: DSI panel - -/ { - ... - soc { - ... - ltdc: display-controller@40016800 { - compatible = "st,stm32-ltdc"; - reg = <0x40016800 0x200>; - interrupts = <88>, <89>; - resets = <&rcc STM32F4_APB2_RESET(LTDC)>; - clocks = <&rcc 1 CLK_LCD>; - clock-names = "lcd"; - - port { - ltdc_out_dsi: endpoint { - remote-endpoint = <&dsi_in>; - }; - }; - }; - - - dsi: dsi@40016c00 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "st,stm32-dsi"; - reg = <0x40016c00 0x800>; - clocks = <&rcc 1 CLK_F469_DSI>, <&clk_hse>; - clock-names = "pclk", "ref"; - resets = <&rcc STM32F4_APB2_RESET(DSI)>; - reset-names = "apb"; - phy-dsi-supply = <®18>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - dsi_in: endpoint { - remote-endpoint = <<dc_out_dsi>; - }; - }; - - port@1 { - reg = <1>; - dsi_out: endpoint { - remote-endpoint = <&dsi_in_panel>; - }; - }; - - }; - - panel-dsi@0 { - reg = <0>; /* dsi virtual channel (0..3) */ - compatible = ...; - enable-gpios = ...; - - port { - dsi_in_panel: endpoint { - remote-endpoint = <&dsi_out>; - }; - }; - - }; - - }; - - }; -}; diff --git a/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml b/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml new file mode 100644 index 000000000000..5d01c83234a3 --- /dev/null +++ b/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml @@ -0,0 +1,82 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/st,stm32-ltdc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectronics STM32 lcd-tft display controller + +maintainers: + - Philippe Cornu + - Yannick Fertre + +properties: + compatible: + const: st,stm32-ltdc + + reg: + maxItems: 1 + + interrupts: + minItems: 2 + maxItems: 2 + + clocks: + items: + - description: Module Clock + + clock-names: + items: + - const: lcd + + pinctrl-names: true + + resets: + maxItems: 1 + + port: + type: object + description: + "Video port for DPI RGB output. + ltdc has one video port with up to 2 endpoints: + - for external dpi rgb panel or bridge, using gpios. + - for internal dpi input of the MIPI DSI host controller. + Note: These 2 endpoints cannot be activated simultaneously. + Please refer to the bindings defined in + Documentation/devicetree/bindings/media/video-interfaces.txt." + +patternProperties: + "^pinctrl-[0-9]+$": true + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - resets + - port + +examples: + - | + #include + #include + #include + ltdc: display-controller@40016800 { + compatible = "st,stm32-ltdc"; + reg = <0x5a001000 0x400>; + interrupts = , + ; + clocks = <&rcc LTDC_PX>; + clock-names = "lcd"; + resets = <&rcc LTDC_R>; + + port { + ltdc_out_dsi: endpoint { + remote-endpoint = <&dsi_in>; + }; + }; + }; + +... +