From patchwork Mon Oct 14 06:15:46 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Oleksij Rempel X-Patchwork-Id: 11187823 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 239B217D4 for ; Mon, 14 Oct 2019 06:16:18 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 0E90B20854 for ; Mon, 14 Oct 2019 06:16:18 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1730066AbfJNGQR (ORCPT ); Mon, 14 Oct 2019 02:16:17 -0400 Received: from metis.ext.pengutronix.de ([85.220.165.71]:43445 "EHLO metis.ext.pengutronix.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1730051AbfJNGQP (ORCPT ); Mon, 14 Oct 2019 02:16:15 -0400 Received: from dude.hi.pengutronix.de ([2001:67c:670:100:1d::7]) by metis.ext.pengutronix.de with esmtps (TLS1.3:ECDHE_RSA_AES_256_GCM_SHA384:256) (Exim 4.92) (envelope-from ) id 1iJte6-0006et-FT; Mon, 14 Oct 2019 08:15:54 +0200 Received: from ore by dude.hi.pengutronix.de with local (Exim 4.92) (envelope-from ) id 1iJte2-0000yJ-Ip; Mon, 14 Oct 2019 08:15:50 +0200 From: Oleksij Rempel To: Andrew Lunn , Chris Snook , Florian Fainelli , James Hogan , Jay Cliburn , Mark Rutland , Paul Burton , Ralf Baechle , Rob Herring , Russell King , Vivien Didelot Cc: Oleksij Rempel , Pengutronix Kernel Team , "David S. Miller" , netdev@vger.kernel.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, linux-mips@vger.kernel.org Subject: [PATCH v1 1/4] net: ag71xx: port to phylink Date: Mon, 14 Oct 2019 08:15:46 +0200 Message-Id: <20191014061549.3669-2-o.rempel@pengutronix.de> X-Mailer: git-send-email 2.23.0 In-Reply-To: <20191014061549.3669-1-o.rempel@pengutronix.de> References: <20191014061549.3669-1-o.rempel@pengutronix.de> MIME-Version: 1.0 X-SA-Exim-Connect-IP: 2001:67c:670:100:1d::7 X-SA-Exim-Mail-From: ore@pengutronix.de X-SA-Exim-Scanned: No (on metis.ext.pengutronix.de); SAEximRunCond expanded to false X-PTX-Original-Recipient: linux-mips@vger.kernel.org Sender: linux-mips-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-mips@vger.kernel.org The port to phylink was done as close as possible to initial functionality. Theoretically this HW can support flow control, practically seems to be not enough to just enable it. So, more work should be done. Signed-off-by: Oleksij Rempel --- drivers/net/ethernet/atheros/Kconfig | 2 +- drivers/net/ethernet/atheros/ag71xx.c | 144 +++++++++++++++----------- 2 files changed, 85 insertions(+), 61 deletions(-) diff --git a/drivers/net/ethernet/atheros/Kconfig b/drivers/net/ethernet/atheros/Kconfig index 0058051ba925..2720bde5034e 100644 --- a/drivers/net/ethernet/atheros/Kconfig +++ b/drivers/net/ethernet/atheros/Kconfig @@ -20,7 +20,7 @@ if NET_VENDOR_ATHEROS config AG71XX tristate "Atheros AR7XXX/AR9XXX built-in ethernet mac support" depends on ATH79 - select PHYLIB + select PHYLINK help If you wish to compile a kernel for AR7XXX/91XXX and enable ethernet support, then you should always answer Y to this. diff --git a/drivers/net/ethernet/atheros/ag71xx.c b/drivers/net/ethernet/atheros/ag71xx.c index 1b1a09095c0d..91d6073300c7 100644 --- a/drivers/net/ethernet/atheros/ag71xx.c +++ b/drivers/net/ethernet/atheros/ag71xx.c @@ -32,6 +32,7 @@ #include #include #include +#include #include #include #include @@ -314,6 +315,8 @@ struct ag71xx { dma_addr_t stop_desc_dma; int phy_if_mode; + struct phylink *phylink; + struct phylink_config phylink_config; struct delayed_work restart_work; struct timer_list oom_timer; @@ -845,24 +848,20 @@ static void ag71xx_hw_start(struct ag71xx *ag) netif_wake_queue(ag->ndev); } -static void ag71xx_link_adjust(struct ag71xx *ag, bool update) +static void ag71xx_mac_config(struct phylink_config *config, unsigned int mode, + const struct phylink_link_state *state) { - struct phy_device *phydev = ag->ndev->phydev; + struct ag71xx *ag = netdev_priv(to_net_dev(config->dev)); u32 cfg2; u32 ifctl; u32 fifo5; - if (!phydev->link && update) { - ag71xx_hw_stop(ag); - return; - } - if (!ag71xx_is(ag, AR7100) && !ag71xx_is(ag, AR9130)) ag71xx_fast_reset(ag); cfg2 = ag71xx_rr(ag, AG71XX_REG_MAC_CFG2); cfg2 &= ~(MAC_CFG2_IF_1000 | MAC_CFG2_IF_10_100 | MAC_CFG2_FDX); - cfg2 |= (phydev->duplex) ? MAC_CFG2_FDX : 0; + cfg2 |= (state->duplex) ? MAC_CFG2_FDX : 0; ifctl = ag71xx_rr(ag, AG71XX_REG_MAC_IFCTL); ifctl &= ~(MAC_IFCTL_SPEED); @@ -870,7 +869,7 @@ static void ag71xx_link_adjust(struct ag71xx *ag, bool update) fifo5 = ag71xx_rr(ag, AG71XX_REG_FIFO_CFG5); fifo5 &= ~FIFO_CFG5_BM; - switch (phydev->speed) { + switch (state->speed) { case SPEED_1000: cfg2 |= MAC_CFG2_IF_1000; fifo5 |= FIFO_CFG5_BM; @@ -883,7 +882,6 @@ static void ag71xx_link_adjust(struct ag71xx *ag, bool update) cfg2 |= MAC_CFG2_IF_10_100; break; default: - WARN(1, "not supported speed %i\n", phydev->speed); return; } @@ -897,58 +895,76 @@ static void ag71xx_link_adjust(struct ag71xx *ag, bool update) ag71xx_wr(ag, AG71XX_REG_MAC_CFG2, cfg2); ag71xx_wr(ag, AG71XX_REG_FIFO_CFG5, fifo5); ag71xx_wr(ag, AG71XX_REG_MAC_IFCTL, ifctl); - - ag71xx_hw_start(ag); - - if (update) - phy_print_status(phydev); } -static void ag71xx_phy_link_adjust(struct net_device *ndev) +static void ag71xx_mac_validate(struct phylink_config *config, + unsigned long *supported, + struct phylink_link_state *state) { - struct ag71xx *ag = netdev_priv(ndev); + __ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, }; + + if (state->interface != PHY_INTERFACE_MODE_NA && + state->interface != PHY_INTERFACE_MODE_GMII && + state->interface != PHY_INTERFACE_MODE_MII) { + bitmap_zero(supported, __ETHTOOL_LINK_MODE_MASK_NBITS); + return; + } + + phylink_set(mask, MII); + + /* flow control is not supported */ - ag71xx_link_adjust(ag, true); + phylink_set(mask, 10baseT_Half); + phylink_set(mask, 10baseT_Full); + phylink_set(mask, 100baseT_Half); + phylink_set(mask, 100baseT_Full); + + phylink_set(mask, 1000baseT_Full); + phylink_set(mask, 1000baseX_Full); + + bitmap_and(supported, supported, mask, + __ETHTOOL_LINK_MODE_MASK_NBITS); + bitmap_and(state->advertising, state->advertising, mask, + __ETHTOOL_LINK_MODE_MASK_NBITS); } -static int ag71xx_phy_connect(struct ag71xx *ag) +static void ag71xx_mac_link_down(struct phylink_config *config, + unsigned int mode, phy_interface_t interface) { - struct device_node *np = ag->pdev->dev.of_node; - struct net_device *ndev = ag->ndev; - struct device_node *phy_node; - struct phy_device *phydev; - int ret; + struct ag71xx *ag = netdev_priv(to_net_dev(config->dev)); - if (of_phy_is_fixed_link(np)) { - ret = of_phy_register_fixed_link(np); - if (ret < 0) { - netif_err(ag, probe, ndev, "Failed to register fixed PHY link: %d\n", - ret); - return ret; - } + ag71xx_hw_stop(ag); +} - phy_node = of_node_get(np); - } else { - phy_node = of_parse_phandle(np, "phy-handle", 0); - } +static void ag71xx_mac_link_up(struct phylink_config *config, unsigned int mode, + phy_interface_t interface, + struct phy_device *phy) +{ + struct ag71xx *ag = netdev_priv(to_net_dev(config->dev)); - if (!phy_node) { - netif_err(ag, probe, ndev, "Could not find valid phy node\n"); - return -ENODEV; - } + ag71xx_hw_start(ag); +} - phydev = of_phy_connect(ag->ndev, phy_node, ag71xx_phy_link_adjust, - 0, ag->phy_if_mode); +static const struct phylink_mac_ops ag71xx_phylink_mac_ops = { + .validate = ag71xx_mac_validate, + .mac_config = ag71xx_mac_config, + .mac_link_down = ag71xx_mac_link_down, + .mac_link_up = ag71xx_mac_link_up, +}; - of_node_put(phy_node); +static int ag71xx_phy_setup(struct ag71xx *ag) +{ + struct phylink *phylink; - if (!phydev) { - netif_err(ag, probe, ndev, "Could not connect to PHY device\n"); - return -ENODEV; - } + ag->phylink_config.dev = &ag->ndev->dev; + ag->phylink_config.type = PHYLINK_NETDEV; - phy_attached_info(phydev); + phylink = phylink_create(&ag->phylink_config, ag->pdev->dev.fwnode, + ag->phy_if_mode, &ag71xx_phylink_mac_ops); + if (IS_ERR(phylink)) + return PTR_ERR(phylink); + ag->phylink = phylink; return 0; } @@ -1239,6 +1255,13 @@ static int ag71xx_open(struct net_device *ndev) unsigned int max_frame_len; int ret; + ret = phylink_of_phy_connect(ag->phylink, ag->pdev->dev.of_node, 0); + if (ret) { + netif_info(ag, link, ndev, "phylink_of_phy_connect filed with err: %i\n", + ret); + goto err; + } + max_frame_len = ag71xx_max_frame_len(ndev->mtu); ag->rx_buf_size = SKB_DATA_ALIGN(max_frame_len + NET_SKB_PAD + NET_IP_ALIGN); @@ -1251,11 +1274,7 @@ static int ag71xx_open(struct net_device *ndev) if (ret) goto err; - ret = ag71xx_phy_connect(ag); - if (ret) - goto err; - - phy_start(ndev->phydev); + phylink_start(ag->phylink); return 0; @@ -1268,8 +1287,7 @@ static int ag71xx_stop(struct net_device *ndev) { struct ag71xx *ag = netdev_priv(ndev); - phy_stop(ndev->phydev); - phy_disconnect(ndev->phydev); + phylink_stop(ag->phylink); ag71xx_hw_disable(ag); return 0; @@ -1396,10 +1414,9 @@ static netdev_tx_t ag71xx_hard_start_xmit(struct sk_buff *skb, static int ag71xx_do_ioctl(struct net_device *ndev, struct ifreq *ifr, int cmd) { - if (!ndev->phydev) - return -EINVAL; + struct ag71xx *ag = netdev_priv(ndev); - return phy_mii_ioctl(ndev->phydev, ifr, cmd); + return phylink_mii_ioctl(ag->phylink, ifr, cmd); } static void ag71xx_oom_timer_handler(struct timer_list *t) @@ -1422,13 +1439,14 @@ static void ag71xx_restart_work_func(struct work_struct *work) { struct ag71xx *ag = container_of(work, struct ag71xx, restart_work.work); - struct net_device *ndev = ag->ndev; rtnl_lock(); ag71xx_hw_disable(ag); ag71xx_hw_enable(ag); - if (ndev->phydev->link) - ag71xx_link_adjust(ag, false); + + phylink_stop(ag->phylink); + phylink_start(ag->phylink); + rtnl_unlock(); } @@ -1769,6 +1787,12 @@ static int ag71xx_probe(struct platform_device *pdev) platform_set_drvdata(pdev, ndev); + err = ag71xx_phy_setup(ag); + if (err) { + netif_err(ag, probe, ndev, "failed to setup phy (%d)\n", err); + goto err_mdio_remove; + } + err = register_netdev(ndev); if (err) { netif_err(ag, probe, ndev, "unable to register net device\n"); From patchwork Mon Oct 14 06:15:47 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Oleksij Rempel X-Patchwork-Id: 11187825 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 533C615AB for ; Mon, 14 Oct 2019 06:16:18 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 3D28120873 for ; Mon, 14 Oct 2019 06:16:18 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1730051AbfJNGQR (ORCPT ); Mon, 14 Oct 2019 02:16:17 -0400 Received: from metis.ext.pengutronix.de ([85.220.165.71]:40331 "EHLO metis.ext.pengutronix.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1730070AbfJNGQR (ORCPT ); Mon, 14 Oct 2019 02:16:17 -0400 Received: from dude.hi.pengutronix.de ([2001:67c:670:100:1d::7]) by metis.ext.pengutronix.de with esmtps (TLS1.3:ECDHE_RSA_AES_256_GCM_SHA384:256) (Exim 4.92) (envelope-from ) id 1iJte6-0006eu-FQ; Mon, 14 Oct 2019 08:15:54 +0200 Received: from ore by dude.hi.pengutronix.de with local (Exim 4.92) (envelope-from ) id 1iJte2-0000yS-KA; Mon, 14 Oct 2019 08:15:50 +0200 From: Oleksij Rempel To: Andrew Lunn , Chris Snook , Florian Fainelli , James Hogan , Jay Cliburn , Mark Rutland , Paul Burton , Ralf Baechle , Rob Herring , Russell King , Vivien Didelot Cc: Oleksij Rempel , Pengutronix Kernel Team , "David S. Miller" , netdev@vger.kernel.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, linux-mips@vger.kernel.org Subject: [PATCH v1 2/4] dt-bindings: net: dsa: qca,ar9331 switch documentation Date: Mon, 14 Oct 2019 08:15:47 +0200 Message-Id: <20191014061549.3669-3-o.rempel@pengutronix.de> X-Mailer: git-send-email 2.23.0 In-Reply-To: <20191014061549.3669-1-o.rempel@pengutronix.de> References: <20191014061549.3669-1-o.rempel@pengutronix.de> MIME-Version: 1.0 X-SA-Exim-Connect-IP: 2001:67c:670:100:1d::7 X-SA-Exim-Mail-From: ore@pengutronix.de X-SA-Exim-Scanned: No (on metis.ext.pengutronix.de); SAEximRunCond expanded to false X-PTX-Original-Recipient: linux-mips@vger.kernel.org Sender: linux-mips-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-mips@vger.kernel.org Atheros AR9331 has built-in 5 port switch. The switch can be configured to use all 5 or 4 ports. One of built-in PHYs can be used by first built-in ethernet controller or to be used directly by the switch over second ethernet controller. Signed-off-by: Oleksij Rempel --- .../devicetree/bindings/net/dsa/ar9331.txt | 155 ++++++++++++++++++ 1 file changed, 155 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/dsa/ar9331.txt diff --git a/Documentation/devicetree/bindings/net/dsa/ar9331.txt b/Documentation/devicetree/bindings/net/dsa/ar9331.txt new file mode 100644 index 000000000000..b0f95fd19584 --- /dev/null +++ b/Documentation/devicetree/bindings/net/dsa/ar9331.txt @@ -0,0 +1,155 @@ +Atheros AR9331 built-in switch +============================= + +It is a switch built-in to Atheros AR9331 WiSoC and addressable over internal +MDIO bus. All PHYs are build-in as well. + +Required properties: + + - compatible: should be: "qca,ar9331-switch" + - reg: Address on the MII bus for the switch. + - resets : Must contain an entry for each entry in reset-names. + - reset-names : Must include the following entries: "switch" + - interrupt-parent: Phandle to the parent interrupt controller + - interrupts: IRQ line for the switch + - interrupt-controller: Indicates the switch is itself an interrupt + controller. This is used for the PHY interrupts. + - #interrupt-cells: must be 1 + - mdio: Container of PHY and devices on the switches MDIO bus. + +See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional +required and optional properties. +Examples: + +eth0: ethernet@19000000 { + compatible = "qca,ar9330-eth"; + reg = <0x19000000 0x200>; + interrupts = <4>; + + resets = <&rst 9>, <&rst 22>; + reset-names = "mac", "mdio"; + clocks = <&pll ATH79_CLK_AHB>, <&pll ATH79_CLK_AHB>; + clock-names = "eth", "mdio"; + + phy-mode = "mii"; + phy-handle = <&phy_port4>; +}; + +eth1: ethernet@1a000000 { + compatible = "qca,ar9330-eth"; + reg = <0x1a000000 0x200>; + interrupts = <5>; + resets = <&rst 13>, <&rst 23>; + reset-names = "mac", "mdio"; + clocks = <&pll ATH79_CLK_AHB>, <&pll ATH79_CLK_AHB>; + clock-names = "eth", "mdio"; + + phy-mode = "gmii"; + phy-handle = <&switch_port0>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch10: switch@10 { + #address-cells = <1>; + #size-cells = <0>; + + compatible = "qca,ar9331-switch"; + reg = <16>; + resets = <&rst 8>; + reset-names = "switch"; + + interrupt-parent = <&miscintc>; + interrupts = <12>; + + interrupt-controller; + #interrupt-cells = <1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + switch_port0: port@0 { + reg = <0>; + label = "cpu"; + ethernet = <ð1>; + + phy-mode = "gmii"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + switch_port1: port@1 { + reg = <1>; + phy-handle = <&phy_port0>; + phy-mode = "internal"; + }; + + switch_port2: port@2 { + reg = <2>; + phy-handle = <&phy_port1>; + phy-mode = "internal"; + }; + + switch_port3: port@3 { + reg = <3>; + phy-handle = <&phy_port2>; + phy-mode = "internal"; + }; + + switch_port4: port@4 { + reg = <4>; + phy-handle = <&phy_port3>; + phy-mode = "internal"; + }; + + switch_port5: port@5 { + reg = <5>; + phy-handle = <&phy_port4>; + phy-mode = "internal"; + }; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + interrupt-parent = <&switch10>; + + phy_port0: phy@0 { + reg = <0>; + interrupts = <0>; + }; + + phy_port1: phy@1 { + reg = <1>; + interrupts = <0>; + }; + + phy_port2: phy@2 { + reg = <2>; + interrupts = <0>; + }; + + phy_port3: phy@3 { + reg = <3>; + interrupts = <0>; + }; + + phy_port4: phy@4 { + reg = <4>; + interrupts = <0>; + }; + }; + }; + }; +}; From patchwork Mon Oct 14 06:15:48 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Oleksij Rempel X-Patchwork-Id: 11187827 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id B196E15AB for ; Mon, 14 Oct 2019 06:16:20 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 9C72621783 for ; Mon, 14 Oct 2019 06:16:20 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1730071AbfJNGQT (ORCPT ); Mon, 14 Oct 2019 02:16:19 -0400 Received: from metis.ext.pengutronix.de ([85.220.165.71]:59933 "EHLO metis.ext.pengutronix.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1730052AbfJNGQO (ORCPT ); Mon, 14 Oct 2019 02:16:14 -0400 Received: from dude.hi.pengutronix.de ([2001:67c:670:100:1d::7]) by metis.ext.pengutronix.de with esmtps (TLS1.3:ECDHE_RSA_AES_256_GCM_SHA384:256) (Exim 4.92) (envelope-from ) id 1iJte6-0006ew-Fw; Mon, 14 Oct 2019 08:15:54 +0200 Received: from ore by dude.hi.pengutronix.de with local (Exim 4.92) (envelope-from ) id 1iJte2-0000yb-LL; Mon, 14 Oct 2019 08:15:50 +0200 From: Oleksij Rempel To: Andrew Lunn , Chris Snook , Florian Fainelli , James Hogan , Jay Cliburn , Mark Rutland , Paul Burton , Ralf Baechle , Rob Herring , Russell King , Vivien Didelot Cc: Oleksij Rempel , Pengutronix Kernel Team , "David S. Miller" , netdev@vger.kernel.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, linux-mips@vger.kernel.org Subject: [PATCH v1 3/4] MIPS: ath79: ar9331: add ar9331-switch node Date: Mon, 14 Oct 2019 08:15:48 +0200 Message-Id: <20191014061549.3669-4-o.rempel@pengutronix.de> X-Mailer: git-send-email 2.23.0 In-Reply-To: <20191014061549.3669-1-o.rempel@pengutronix.de> References: <20191014061549.3669-1-o.rempel@pengutronix.de> MIME-Version: 1.0 X-SA-Exim-Connect-IP: 2001:67c:670:100:1d::7 X-SA-Exim-Mail-From: ore@pengutronix.de X-SA-Exim-Scanned: No (on metis.ext.pengutronix.de); SAEximRunCond expanded to false X-PTX-Original-Recipient: linux-mips@vger.kernel.org Sender: linux-mips-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-mips@vger.kernel.org Add switch node supported by dsa ar9331 driver. Signed-off-by: Oleksij Rempel --- arch/mips/boot/dts/qca/ar9331.dtsi | 128 ++++++++++++++++++- arch/mips/boot/dts/qca/ar9331_dpt_module.dts | 13 ++ 2 files changed, 140 insertions(+), 1 deletion(-) diff --git a/arch/mips/boot/dts/qca/ar9331.dtsi b/arch/mips/boot/dts/qca/ar9331.dtsi index e0f409dd6acf..abd597af7ead 100644 --- a/arch/mips/boot/dts/qca/ar9331.dtsi +++ b/arch/mips/boot/dts/qca/ar9331.dtsi @@ -158,6 +158,9 @@ clocks = <&pll ATH79_CLK_AHB>, <&pll ATH79_CLK_AHB>; clock-names = "eth", "mdio"; + phy-mode = "mii"; + phy-handle = <&phy_port4>; + status = "disabled"; }; @@ -165,13 +168,136 @@ compatible = "qca,ar9330-eth"; reg = <0x1a000000 0x200>; interrupts = <5>; - resets = <&rst 13>, <&rst 23>; reset-names = "mac", "mdio"; clocks = <&pll ATH79_CLK_AHB>, <&pll ATH79_CLK_AHB>; clock-names = "eth", "mdio"; + phy-mode = "gmii"; + phy-handle = <&switch_port0>; + status = "disabled"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch10: switch@10 { + #address-cells = <1>; + #size-cells = <0>; + + compatible = "qca,ar9331-switch"; + reg = <16>; + resets = <&rst 8>; + reset-names = "switch"; + + interrupt-parent = <&miscintc>; + interrupts = <12>; + + interrupt-controller; + #interrupt-cells = <1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + switch_port0: port@0 { + reg = <0>; + label = "cpu"; + ethernet = <ð1>; + + phy-mode = "gmii"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + switch_port1: port@1 { + reg = <1>; + phy-handle = <&phy_port0>; + phy-mode = "internal"; + + status = "disabled"; + }; + + switch_port2: port@2 { + reg = <2>; + phy-handle = <&phy_port1>; + phy-mode = "internal"; + + status = "disabled"; + }; + + switch_port3: port@3 { + reg = <3>; + phy-handle = <&phy_port2>; + phy-mode = "internal"; + + status = "disabled"; + }; + + switch_port4: port@4 { + reg = <4>; + phy-handle = <&phy_port3>; + phy-mode = "internal"; + + status = "disabled"; + }; + + switch_port5: port@5 { + reg = <5>; + phy-handle = <&phy_port4>; + phy-mode = "internal"; + + status = "disabled"; + }; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + interrupt-parent = <&switch10>; + + phy_port0: phy@0 { + reg = <0>; + interrupts = <0>; + status = "disabled"; + }; + + phy_port1: phy@1 { + reg = <1>; + interrupts = <0>; + status = "disabled"; + }; + + phy_port2: phy@2 { + reg = <2>; + interrupts = <0>; + status = "disabled"; + }; + + phy_port3: phy@3 { + reg = <3>; + interrupts = <0>; + status = "disabled"; + }; + + phy_port4: phy@4 { + reg = <4>; + interrupts = <0>; + status = "disabled"; + }; + }; + }; + }; }; usb: usb@1b000100 { diff --git a/arch/mips/boot/dts/qca/ar9331_dpt_module.dts b/arch/mips/boot/dts/qca/ar9331_dpt_module.dts index 77bab823eb3b..0f2b20044834 100644 --- a/arch/mips/boot/dts/qca/ar9331_dpt_module.dts +++ b/arch/mips/boot/dts/qca/ar9331_dpt_module.dts @@ -84,3 +84,16 @@ ð1 { status = "okay"; }; + +&switch_port1 { + label = "lan0"; + status = "okay"; +}; + +&phy_port0 { + status = "okay"; +}; + +&phy_port4 { + status = "okay"; +}; From patchwork Mon Oct 14 06:15:49 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Oleksij Rempel X-Patchwork-Id: 11187821 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id CC68514E5 for ; Mon, 14 Oct 2019 06:16:17 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 86B692089C for ; Mon, 14 Oct 2019 06:16:17 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1730016AbfJNGQR (ORCPT ); Mon, 14 Oct 2019 02:16:17 -0400 Received: from metis.ext.pengutronix.de ([85.220.165.71]:58305 "EHLO metis.ext.pengutronix.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1730066AbfJNGQQ (ORCPT ); Mon, 14 Oct 2019 02:16:16 -0400 Received: from dude.hi.pengutronix.de ([2001:67c:670:100:1d::7]) by metis.ext.pengutronix.de with esmtps (TLS1.3:ECDHE_RSA_AES_256_GCM_SHA384:256) (Exim 4.92) (envelope-from ) id 1iJte6-0006ex-FV; Mon, 14 Oct 2019 08:15:54 +0200 Received: from ore by dude.hi.pengutronix.de with local (Exim 4.92) (envelope-from ) id 1iJte2-0000yk-Mz; Mon, 14 Oct 2019 08:15:50 +0200 From: Oleksij Rempel To: Andrew Lunn , Chris Snook , Florian Fainelli , James Hogan , Jay Cliburn , Mark Rutland , Paul Burton , Ralf Baechle , Rob Herring , Russell King , Vivien Didelot Cc: Oleksij Rempel , Pengutronix Kernel Team , "David S. Miller" , netdev@vger.kernel.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, linux-mips@vger.kernel.org Subject: [PATCH v1 4/4] net: dsa: add support for Atheros AR9331 build-in switch Date: Mon, 14 Oct 2019 08:15:49 +0200 Message-Id: <20191014061549.3669-5-o.rempel@pengutronix.de> X-Mailer: git-send-email 2.23.0 In-Reply-To: <20191014061549.3669-1-o.rempel@pengutronix.de> References: <20191014061549.3669-1-o.rempel@pengutronix.de> MIME-Version: 1.0 X-SA-Exim-Connect-IP: 2001:67c:670:100:1d::7 X-SA-Exim-Mail-From: ore@pengutronix.de X-SA-Exim-Scanned: No (on metis.ext.pengutronix.de); SAEximRunCond expanded to false X-PTX-Original-Recipient: linux-mips@vger.kernel.org Sender: linux-mips-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-mips@vger.kernel.org Provide basic support for Atheros AR9331 build-in switch. So far it works as port multiplexer without any hardware offloading support. Signed-off-by: Oleksij Rempel --- drivers/net/dsa/Kconfig | 2 + drivers/net/dsa/Makefile | 1 + drivers/net/dsa/qca/Kconfig | 11 + drivers/net/dsa/qca/Makefile | 2 + drivers/net/dsa/qca/ar9331.c | 822 +++++++++++++++++++++++++++++++++++ include/net/dsa.h | 2 + net/dsa/Kconfig | 6 + net/dsa/Makefile | 1 + net/dsa/tag_ar9331.c | 97 +++++ 9 files changed, 944 insertions(+) create mode 100644 drivers/net/dsa/qca/Kconfig create mode 100644 drivers/net/dsa/qca/Makefile create mode 100644 drivers/net/dsa/qca/ar9331.c create mode 100644 net/dsa/tag_ar9331.c diff --git a/drivers/net/dsa/Kconfig b/drivers/net/dsa/Kconfig index f6232ce8481f..de9610a3dd5c 100644 --- a/drivers/net/dsa/Kconfig +++ b/drivers/net/dsa/Kconfig @@ -52,6 +52,8 @@ source "drivers/net/dsa/microchip/Kconfig" source "drivers/net/dsa/mv88e6xxx/Kconfig" +source "drivers/net/dsa/qca/Kconfig" + source "drivers/net/dsa/sja1105/Kconfig" config NET_DSA_QCA8K diff --git a/drivers/net/dsa/Makefile b/drivers/net/dsa/Makefile index ae70b79628d6..90e5b1ed69c5 100644 --- a/drivers/net/dsa/Makefile +++ b/drivers/net/dsa/Makefile @@ -20,4 +20,5 @@ obj-$(CONFIG_NET_DSA_VITESSE_VSC73XX_SPI) += vitesse-vsc73xx-spi.o obj-y += b53/ obj-y += microchip/ obj-y += mv88e6xxx/ +obj-y += qca/ obj-y += sja1105/ diff --git a/drivers/net/dsa/qca/Kconfig b/drivers/net/dsa/qca/Kconfig new file mode 100644 index 000000000000..7e4978f46642 --- /dev/null +++ b/drivers/net/dsa/qca/Kconfig @@ -0,0 +1,11 @@ +# SPDX-License-Identifier: GPL-2.0-only +config NET_DSA_AR9331 + tristate "Atheros AR9331 Ethernet switch support" + depends on NET_DSA + select NET_DSA_TAG_AR9331 + select REGMAP + ---help--- + This enables support for the Atheros AR9331 build-in Ethernet + switch. + + diff --git a/drivers/net/dsa/qca/Makefile b/drivers/net/dsa/qca/Makefile new file mode 100644 index 000000000000..274022319066 --- /dev/null +++ b/drivers/net/dsa/qca/Makefile @@ -0,0 +1,2 @@ +# SPDX-License-Identifier: GPL-2.0-only +obj-$(CONFIG_NET_DSA_AR9331) += ar9331.o diff --git a/drivers/net/dsa/qca/ar9331.c b/drivers/net/dsa/qca/ar9331.c new file mode 100644 index 000000000000..62537fef59a7 --- /dev/null +++ b/drivers/net/dsa/qca/ar9331.c @@ -0,0 +1,822 @@ +// SPDX-License-Identifier: GPL-2.0-only +// Copyright (c) 2019 Pengutronix, Oleksij Rempel + +#include +#include +#include +#include +#include +#include +#include + +#define AR9331_SW_NAME "ar9331_switch" +#define AR9331_SW_PORTS 6 + +/* dummy reg to change page */ +#define AR9331_SW_REG_PAGE BIT(18) + +/* Global Interrupt */ +#define AR9331_SW_REG_GINT 0x10 +#define AR9331_SW_REG_GINT_MASK 0x14 +#define AR9331_SW_GINT_PHY_INT BIT(2) + +#define AR9331_SW_REG_FLOOD_MASK 0x2c +#define AR9331_SW_FLOOD_MASK_BROAD_TO_CPU BIT(26) + +#define AR9331_SW_REG_GLOBAL_CTRL 0x30 +#define AR9331_SW_GLOBAL_CTRL_MFS_M GENMASK(13, 0) + +#define AR9331_SW_REG_MDIO_CTRL 0x98 +#define AR9331_SW_MDIO_CTRL_BUSY BIT(31) +#define AR9331_SW_MDIO_CTRL_MASTER_EN BIT(30) +#define AR9331_SW_MDIO_CTRL_CMD_READ BIT(27) +#define AR9331_SW_MDIO_CTRL_PHY_ADDR_M GENMASK(25, 21) +#define AR9331_SW_MDIO_CTRL_REG_ADDR_M GENMASK(20, 16) +#define AR9331_SW_MDIO_CTRL_DATA_M GENMASK(16, 0) + +#define AR9331_SW_REG_PORT_STATUS(_port) (0x100 + (_port) * 0x100) + +/* FLOW_LINK_EN - enable mac flow control config auto-neg with phy. + * If not set, mac can be config by software. + */ +#define AR9331_SW_PORT_STATUS_FLOW_LINK_EN BIT(12) + +/* LINK_EN - If set, MAC is configured from PHY link status. + * If not set, MAC should be configured by software. + */ +#define AR9331_SW_PORT_STATUS_LINK_EN BIT(9) +#define AR9331_SW_PORT_STATUS_DUPLEX_MODE BIT(6) +#define AR9331_SW_PORT_STATUS_RX_FLOW_EN BIT(5) +#define AR9331_SW_PORT_STATUS_TX_FLOW_EN BIT(4) +#define AR9331_SW_PORT_STATUS_RXMAC BIT(3) +#define AR9331_SW_PORT_STATUS_TXMAC BIT(2) +#define AR9331_SW_PORT_STATUS_SPEED_M GENMASK(1, 0) +#define AR9331_SW_PORT_STATUS_SPEED_1000 2 +#define AR9331_SW_PORT_STATUS_SPEED_100 1 +#define AR9331_SW_PORT_STATUS_SPEED_10 0 + +#define AR9331_SW_PORT_STATUS_MAC_MASK \ + (AR9331_SW_PORT_STATUS_TXMAC | AR9331_SW_PORT_STATUS_RXMAC) + +#define AR9331_SW_PORT_STATUS_LINK_MASK \ + (AR9331_SW_PORT_STATUS_LINK_EN | AR9331_SW_PORT_STATUS_FLOW_LINK_EN | \ + AR9331_SW_PORT_STATUS_DUPLEX_MODE | \ + AR9331_SW_PORT_STATUS_RX_FLOW_EN | AR9331_SW_PORT_STATUS_TX_FLOW_EN | \ + AR9331_SW_PORT_STATUS_SPEED_M) + +/* Phy bypass mode + * ------------------------------------------------------------------------ + * Bit: | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 |10 |11 |12 |13 |14 |15 | + * + * real | start | OP | PhyAddr | Reg Addr | TA | + * atheros| start | OP | 2'b00 |PhyAdd[2:0]| Reg Addr[4:0] | TA | + * + * + * Bit: |16 |17 |18 |19 |20 |21 |22 |23 |24 |25 |26 |27 |28 |29 |30 |31 | + * real | Data | + * atheros| Data | + * + * ------------------------------------------------------------------------ + * Page address mode + * ------------------------------------------------------------------------ + * Bit: | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 |10 |11 |12 |13 |14 |15 | + * real | start | OP | PhyAddr | Reg Addr | TA | + * atheros| start | OP | 2'b11 | 8'b0 | TA | + * + * Bit: |16 |17 |18 |19 |20 |21 |22 |23 |24 |25 |26 |27 |28 |29 |30 |31 | + * real | Data | + * atheros| | Page [9:0] | + */ +/* In case of Page Address mode, Bit[18:9] of 32 bit register address should be + * written to bits[9:0] of mdio data register. + */ +#define AR9331_SW_ADDR_PAGE GENMASK(18, 9) + +/* ------------------------------------------------------------------------ + * Normal register access mode + * ------------------------------------------------------------------------ + * Bit: | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 |10 |11 |12 |13 |14 |15 | + * real | start | OP | PhyAddr | Reg Addr | TA | + * atheros| start | OP | 2'b10 | low_addr[7:0] | TA | + * + * Bit: |16 |17 |18 |19 |20 |21 |22 |23 |24 |25 |26 |27 |28 |29 |30 |31 | + * real | Data | + * atheros| Data | + * ------------------------------------------------------------------------ + */ +#define AR9331_SW_LOW_ADDR_PHY GENMASK(8, 6) +#define AR9331_SW_LOW_ADDR_REG GENMASK(5, 1) + +#define AR9331_SW_MDIO_PHY_MODE_M GENMASK(4, 3) +#define AR9331_SW_MDIO_PHY_MODE_PAGE 3 +#define AR9331_SW_MDIO_PHY_MODE_REG 2 +#define AR9331_SW_MDIO_PHY_MODE_BYPASS 0 +#define AR9331_SW_MDIO_PHY_ADDR_M GENMASK(2, 0) + +/* Empirical determined values */ +#define AR9331_SW_MDIO_POLL_SLEEP_US 1 +#define AR9331_SW_MDIO_POLL_TIMEOUT_US 20 + +struct ar9331_sw_priv { + struct device *dev; + struct dsa_switch *ds; + struct dsa_switch_ops ops; + struct irq_domain *irqdomain; + struct mii_bus *mbus; /* mdio master */ + struct mii_bus *sbus; /* mdio slave */ + struct regmap *regmap; + struct reset_control *sw_reset; +}; + +/* Warning: switch reset will reset last AR9331_SW_MDIO_PHY_MODE_PAGE request + * If some kind of optimization is used, the request should be repeated. + */ +static int ar9331_sw_reset(struct ar9331_sw_priv *priv) +{ + int ret; + + ret = reset_control_assert(priv->sw_reset); + if (ret) + goto error; + + /* AR9331 doc do not provide any information about proper reset + * sequence. The AR8136 (the closes switch to the AR9331) doc says: + * reset duration should be greater than 10ms. So, let's use this value + * for now. + */ + usleep_range(10000, 15000); + ret = reset_control_deassert(priv->sw_reset); + if (ret) + goto error; + + return 0; +error: + dev_err_ratelimited(priv->dev, "%s: %i\n", __func__, ret); + return ret; +} + +static int ar9331_sw_mbus_write(struct mii_bus *mbus, int port, int regnum, + u16 data) +{ + struct ar9331_sw_priv *priv = mbus->priv; + struct regmap *regmap = priv->regmap; + u32 val; + int ret; + + ret = regmap_write(regmap, AR9331_SW_REG_MDIO_CTRL, + AR9331_SW_MDIO_CTRL_BUSY | + AR9331_SW_MDIO_CTRL_MASTER_EN | + FIELD_PREP(AR9331_SW_MDIO_CTRL_PHY_ADDR_M, port) | + FIELD_PREP(AR9331_SW_MDIO_CTRL_REG_ADDR_M, regnum) | + FIELD_PREP(AR9331_SW_MDIO_CTRL_DATA_M, data)); + if (ret) + goto error; + + ret = regmap_read_poll_timeout(regmap, AR9331_SW_REG_MDIO_CTRL, val, + !(val & AR9331_SW_MDIO_CTRL_BUSY), + AR9331_SW_MDIO_POLL_SLEEP_US, + AR9331_SW_MDIO_POLL_TIMEOUT_US); + if (ret) + goto error; + + return 0; +error: + dev_err_ratelimited(priv->dev, "PHY write error: %i\n", ret); + return ret; +} + +static int ar9331_sw_mbus_read(struct mii_bus *mbus, int port, int regnum) +{ + struct ar9331_sw_priv *priv = mbus->priv; + struct regmap *regmap = priv->regmap; + u32 val; + int ret; + + ret = regmap_write(regmap, AR9331_SW_REG_MDIO_CTRL, + AR9331_SW_MDIO_CTRL_BUSY | + AR9331_SW_MDIO_CTRL_MASTER_EN | + AR9331_SW_MDIO_CTRL_CMD_READ | + FIELD_PREP(AR9331_SW_MDIO_CTRL_PHY_ADDR_M, port) | + FIELD_PREP(AR9331_SW_MDIO_CTRL_REG_ADDR_M, regnum)); + if (ret) + goto error; + + ret = regmap_read_poll_timeout(regmap, AR9331_SW_REG_MDIO_CTRL, val, + !(val & AR9331_SW_MDIO_CTRL_BUSY), + AR9331_SW_MDIO_POLL_SLEEP_US, + AR9331_SW_MDIO_POLL_TIMEOUT_US); + if (ret) + goto error; + + ret = regmap_read(regmap, AR9331_SW_REG_MDIO_CTRL, &val); + if (ret) + goto error; + + return FIELD_GET(AR9331_SW_MDIO_CTRL_DATA_M, val); + +error: + dev_err_ratelimited(priv->dev, "PHY read error: %i\n", ret); + return ret; +} + +static int ar9331_sw_mbus_init(struct ar9331_sw_priv *priv) +{ + struct device *dev = priv->dev; + static struct mii_bus *mbus; + struct device_node *np, *mnp; + int ret; + + np = dev->of_node; + + mbus = devm_mdiobus_alloc(dev); + if (!mbus) + return -ENOMEM; + + mbus->name = np->full_name; + snprintf(mbus->id, MII_BUS_ID_SIZE, "%pOF", np); + + mbus->read = ar9331_sw_mbus_read; + mbus->write = ar9331_sw_mbus_write; + mbus->priv = priv; + mbus->parent = dev; + + mnp = of_get_child_by_name(np, "mdio"); + ret = of_mdiobus_register(mbus, mnp); + of_node_put(mnp); + if (ret) + return ret; + + priv->mbus = mbus; + + return 0; +} + +static int ar9331_sw_setup(struct dsa_switch *ds) +{ + struct ar9331_sw_priv *priv = (struct ar9331_sw_priv *)ds->priv; + struct regmap *regmap = priv->regmap; + int ret; + + ret = ar9331_sw_reset(priv); + if (ret) + return ret; + + /* Reset will set proper defaults. CPU - Port0 will be enabled and + * configured. All other ports (ports 1 - 5) are disabled + */ + ret = ar9331_sw_mbus_init(priv); + if (ret) + return ret; + + /* Do not drop broadcast frames */ + ret = regmap_write_bits(regmap, AR9331_SW_REG_FLOOD_MASK, + AR9331_SW_FLOOD_MASK_BROAD_TO_CPU, + AR9331_SW_FLOOD_MASK_BROAD_TO_CPU); + if (ret) + goto error; + + /* Sync max frame size with value used in + * drivers/net/ethernet/atheros/ag71xx.c for ar9330 SoC. + * TODO: In both drivers this value seems to be not real maximal size + * The switch is able to configure 0x3fff and ethernet controller + * 0xffff. Are there any better way to sync this values? + */ + ret = regmap_write_bits(regmap, AR9331_SW_REG_GLOBAL_CTRL, + AR9331_SW_GLOBAL_CTRL_MFS_M, + FIELD_PREP(AR9331_SW_GLOBAL_CTRL_MFS_M, 1540)); + if (ret) + goto error; + + return 0; +error: + dev_err_ratelimited(priv->dev, "%s: %i\n", __func__, ret); + return ret; +} + +static int ar9331_sw_port_enable(struct dsa_switch *ds, int port, + struct phy_device *phy) +{ + struct ar9331_sw_priv *priv = (struct ar9331_sw_priv *)ds->priv; + struct regmap *regmap = priv->regmap; + int ret; + + /* nothing to enable. Just set link to initial state */ + ret = regmap_write(regmap, AR9331_SW_REG_PORT_STATUS(port), 0); + if (ret) + dev_err_ratelimited(priv->dev, "%s: %i\n", __func__, ret); + + return ret; +} + +static void ar9331_sw_port_disable(struct dsa_switch *ds, int port) +{ + struct ar9331_sw_priv *priv = (struct ar9331_sw_priv *)ds->priv; + struct regmap *regmap = priv->regmap; + int ret; + + ret = regmap_write(regmap, AR9331_SW_REG_PORT_STATUS(port), 0); + if (ret) + dev_err_ratelimited(priv->dev, "%s: %i\n", __func__, ret); +} + +static enum dsa_tag_protocol ar9331_sw_get_tag_protocol(struct dsa_switch *ds, + int port) +{ + return DSA_TAG_PROTO_AR9331; +} + +static void ar9331_sw_phylink_validate(struct dsa_switch *ds, int port, + unsigned long *supported, + struct phylink_link_state *state) +{ + __ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, }; + + switch (port) { + case 0: + if (state->interface != PHY_INTERFACE_MODE_GMII) + goto unsupported; + + phylink_set(mask, 1000baseT_Full); + phylink_set(mask, 1000baseT_Half); + break; + case 1: + case 2: + case 3: + case 4: + case 5: + if (state->interface != PHY_INTERFACE_MODE_INTERNAL) + goto unsupported; + break; + default: + bitmap_zero(supported, __ETHTOOL_LINK_MODE_MASK_NBITS); + dev_err(ds->dev, "Unsupported port: %i\n", port); + return; + } + + phylink_set_port_modes(mask); + phylink_set(mask, Pause); + phylink_set(mask, Asym_Pause); + + phylink_set(mask, 10baseT_Half); + phylink_set(mask, 10baseT_Full); + phylink_set(mask, 100baseT_Half); + phylink_set(mask, 100baseT_Full); + + bitmap_and(supported, supported, mask, + __ETHTOOL_LINK_MODE_MASK_NBITS); + bitmap_and(state->advertising, state->advertising, mask, + __ETHTOOL_LINK_MODE_MASK_NBITS); + + return; + +unsupported: + bitmap_zero(supported, __ETHTOOL_LINK_MODE_MASK_NBITS); + dev_err(ds->dev, "Unsupported interface: %d, port: %d\n", + state->interface, port); +} + +static void ar9331_sw_phylink_mac_config(struct dsa_switch *ds, int port, + unsigned int mode, + const struct phylink_link_state *state) +{ + struct ar9331_sw_priv *priv = (struct ar9331_sw_priv *)ds->priv; + struct regmap *regmap = priv->regmap; + int ret; + u32 val; + + switch (state->speed) { + case SPEED_1000: + val = AR9331_SW_PORT_STATUS_SPEED_1000; + break; + case SPEED_100: + val = AR9331_SW_PORT_STATUS_SPEED_100; + break; + case SPEED_10: + val = AR9331_SW_PORT_STATUS_SPEED_10; + break; + default: + return; + } + + if (state->duplex) + val |= AR9331_SW_PORT_STATUS_DUPLEX_MODE; + + if (state->pause & MLO_PAUSE_TX) + val |= AR9331_SW_PORT_STATUS_TX_FLOW_EN; + + if (state->pause & MLO_PAUSE_RX) + val |= AR9331_SW_PORT_STATUS_RX_FLOW_EN; + + ret = regmap_update_bits(regmap, AR9331_SW_REG_PORT_STATUS(port), + AR9331_SW_PORT_STATUS_LINK_MASK, val); + if (ret) + dev_err_ratelimited(priv->dev, "%s: %i\n", __func__, ret); +} + +static void ar9331_sw_phylink_mac_link_down(struct dsa_switch *ds, int port, + unsigned int mode, + phy_interface_t interface) +{ + struct ar9331_sw_priv *priv = (struct ar9331_sw_priv *)ds->priv; + struct regmap *regmap = priv->regmap; + int ret; + + ret = regmap_update_bits(regmap, AR9331_SW_REG_PORT_STATUS(port), + AR9331_SW_PORT_STATUS_MAC_MASK, 0); + if (ret) + dev_err_ratelimited(priv->dev, "%s: %i\n", __func__, ret); +} + +static void ar9331_sw_phylink_mac_link_up(struct dsa_switch *ds, int port, + unsigned int mode, + phy_interface_t interface, + struct phy_device *phydev) +{ + struct ar9331_sw_priv *priv = (struct ar9331_sw_priv *)ds->priv; + struct regmap *regmap = priv->regmap; + int ret; + + ret = regmap_update_bits(regmap, AR9331_SW_REG_PORT_STATUS(port), + AR9331_SW_PORT_STATUS_MAC_MASK, + AR9331_SW_PORT_STATUS_MAC_MASK); + if (ret) + dev_err_ratelimited(priv->dev, "%s: %i\n", __func__, ret); +} + +static const struct dsa_switch_ops ar9331_sw_ops = { + .get_tag_protocol = ar9331_sw_get_tag_protocol, + .setup = ar9331_sw_setup, + .port_enable = ar9331_sw_port_enable, + .port_disable = ar9331_sw_port_disable, + .phylink_validate = ar9331_sw_phylink_validate, + .phylink_mac_config = ar9331_sw_phylink_mac_config, + .phylink_mac_link_down = ar9331_sw_phylink_mac_link_down, + .phylink_mac_link_up = ar9331_sw_phylink_mac_link_up, +}; + +static irqreturn_t ar9331_sw_irq(int irq, void *data) +{ + struct ar9331_sw_priv *priv = data; + struct regmap *regmap = priv->regmap; + u32 stat; + int ret; + + ret = regmap_read(regmap, AR9331_SW_REG_GINT, &stat); + if (ret) { + dev_err(priv->dev, "can't read interrupt status\n"); + return IRQ_NONE; + } + + if (!stat) + return IRQ_NONE; + + if (stat & AR9331_SW_GINT_PHY_INT) { + int child_irq; + + child_irq = irq_find_mapping(priv->irqdomain, 0); + handle_nested_irq(child_irq); + } + + ret = regmap_write(regmap, AR9331_SW_REG_GINT, stat); + if (ret) { + dev_err(priv->dev, "can't write interrupt status\n"); + return IRQ_NONE; + } + + return IRQ_HANDLED; +} + +static void ar9331_sw_mask_irq(struct irq_data *d) +{ + struct ar9331_sw_priv *priv = irq_data_get_irq_chip_data(d); + struct regmap *regmap = priv->regmap; + int ret; + + ret = regmap_update_bits(regmap, AR9331_SW_REG_GINT_MASK, + AR9331_SW_GINT_PHY_INT, 0); + if (ret) + dev_err(priv->dev, "could not mask IRQ\n"); +} + +static void ar9331_sw_unmask_irq(struct irq_data *d) +{ + struct ar9331_sw_priv *priv = irq_data_get_irq_chip_data(d); + struct regmap *regmap = priv->regmap; + int ret; + + ret = regmap_update_bits(regmap, AR9331_SW_REG_GINT_MASK, + AR9331_SW_GINT_PHY_INT, + AR9331_SW_GINT_PHY_INT); + if (ret) + dev_err(priv->dev, "could not unmask IRQ\n"); +} + +static struct irq_chip ar9331_sw_irq_chip = { + .name = AR9331_SW_NAME, + .irq_mask = ar9331_sw_mask_irq, + .irq_unmask = ar9331_sw_unmask_irq, +}; + +static int ar9331_sw_irq_map(struct irq_domain *domain, unsigned int irq, + irq_hw_number_t hwirq) +{ + irq_set_chip_data(irq, domain->host_data); + irq_set_chip_and_handler(irq, &ar9331_sw_irq_chip, handle_simple_irq); + irq_set_nested_thread(irq, 1); + irq_set_noprobe(irq); + + return 0; +} + +static void ar9331_sw_irq_unmap(struct irq_domain *d, unsigned int irq) +{ + irq_set_nested_thread(irq, 0); + irq_set_chip_and_handler(irq, NULL, NULL); + irq_set_chip_data(irq, NULL); +} + +static const struct irq_domain_ops ar9331_sw_irqdomain_ops = { + .map = ar9331_sw_irq_map, + .unmap = ar9331_sw_irq_unmap, + .xlate = irq_domain_xlate_onecell, +}; + +static int ar9331_sw_irq_init(struct ar9331_sw_priv *priv) +{ + struct device_node *np = priv->dev->of_node; + struct device *dev = priv->dev; + int ret, irq; + + irq = of_irq_get(np, 0); + if (irq <= 0) { + dev_err(dev, "failed to get parent IRQ\n"); + return irq ? irq : -EINVAL; + } + + ret = devm_request_threaded_irq(dev, irq, NULL, ar9331_sw_irq, + IRQF_ONESHOT, AR9331_SW_NAME, priv); + if (ret) { + dev_err(dev, "unable to request irq: %d\n", ret); + return ret; + } + + priv->irqdomain = irq_domain_add_linear(np, 1, &ar9331_sw_irqdomain_ops, + priv); + if (!priv->irqdomain) { + dev_err(dev, "failed to create IRQ domain\n"); + return -EINVAL; + } + + irq_set_parent(irq_create_mapping(priv->irqdomain, 0), irq); + + return 0; +} + +static int __ar9331_mdio_write(struct mii_bus *sbus, u8 mode, u16 reg, u16 val) +{ + u8 r, p; + + p = FIELD_PREP(AR9331_SW_MDIO_PHY_MODE_M, mode) | + FIELD_GET(AR9331_SW_LOW_ADDR_PHY, reg); + r = FIELD_GET(AR9331_SW_LOW_ADDR_REG, reg); + + return sbus->write(sbus, p, r, val); +} + +static int __ar9331_mdio_read(struct mii_bus *sbus, u16 reg) +{ + u8 r, p; + + p = FIELD_PREP(AR9331_SW_MDIO_PHY_MODE_M, AR9331_SW_MDIO_PHY_MODE_REG) | + FIELD_GET(AR9331_SW_LOW_ADDR_PHY, reg); + r = FIELD_GET(AR9331_SW_LOW_ADDR_REG, reg); + + return sbus->read(sbus, p, r); +} + +static int ar9331_mdio_read(void *ctx, const void *reg_buf, size_t reg_len, + void *val_buf, size_t val_len) +{ + struct ar9331_sw_priv *priv = ctx; + struct mii_bus *sbus = priv->sbus; + u32 reg = *(u32 *)reg_buf; + int ret; + + if (reg == AR9331_SW_REG_PAGE) { + /* We cannot read the page selector register from hardware and + * we cache its value in regmap. Return all bits set here, + * that regmap will always write the page on first use. + */ + *(u32 *)val_buf = GENMASK(9, 0); + return 0; + } + + ret = __ar9331_mdio_read(sbus, reg); + if (ret < 0) + goto error; + + *(u32 *)val_buf = ret; + ret = __ar9331_mdio_read(sbus, reg + 2); + if (ret < 0) + goto error; + + *(u32 *)val_buf |= ret << 16; + + return 0; +error: + dev_err_ratelimited(&sbus->dev, "Bus error. Failed to read register.\n"); + return ret; +} + +static int ar9331_mdio_write(void *ctx, u32 reg, u32 val) +{ + struct ar9331_sw_priv *priv = (struct ar9331_sw_priv *)ctx; + struct mii_bus *sbus = priv->sbus; + int ret; + + if (reg == AR9331_SW_REG_PAGE) { + ret = __ar9331_mdio_write(sbus, AR9331_SW_MDIO_PHY_MODE_PAGE, + 0, val); + if (ret < 0) + goto error; + + return 0; + } + + ret = __ar9331_mdio_write(sbus, AR9331_SW_MDIO_PHY_MODE_REG, reg, val); + if (ret < 0) + goto error; + + ret = __ar9331_mdio_write(sbus, AR9331_SW_MDIO_PHY_MODE_REG, reg + 2, + val >> 16); + if (ret < 0) + goto error; + + return 0; +error: + dev_err_ratelimited(&sbus->dev, "Bus error. Failed to write register.\n"); + return ret; +} + +static int ar9331_sw_bus_write(void *context, const void *data, size_t count) +{ + u32 reg = *(u32 *)data; + u32 val = *((u32 *)data + 1); + + return ar9331_mdio_write(context, reg, val); +} + +static const struct regmap_range ar9331_valid_regs[] = { + regmap_reg_range(0x0, 0x0), + regmap_reg_range(0x10, 0x14), + regmap_reg_range(0x20, 0x24), + regmap_reg_range(0x2c, 0x30), + regmap_reg_range(0x40, 0x44), + regmap_reg_range(0x50, 0x78), + regmap_reg_range(0x80, 0x98), + + regmap_reg_range(0x100, 0x120), + regmap_reg_range(0x200, 0x220), + regmap_reg_range(0x300, 0x320), + regmap_reg_range(0x400, 0x420), + regmap_reg_range(0x500, 0x520), + regmap_reg_range(0x600, 0x620), + + regmap_reg_range(0x20000, 0x200a4), + regmap_reg_range(0x20100, 0x201a4), + regmap_reg_range(0x20200, 0x202a4), + regmap_reg_range(0x20300, 0x203a4), + regmap_reg_range(0x20400, 0x204a4), + regmap_reg_range(0x20500, 0x205a4), + + /* dummy page selector reg */ + regmap_reg_range(AR9331_SW_REG_PAGE, AR9331_SW_REG_PAGE), +}; + +static const struct regmap_range ar9331_nonvolatile_regs[] = { + regmap_reg_range(AR9331_SW_REG_PAGE, AR9331_SW_REG_PAGE), +}; + +static const struct regmap_range_cfg ar9331_regmap_range[] = { + { + .selector_reg = AR9331_SW_REG_PAGE, + .selector_mask = GENMASK(9, 0), + .selector_shift = 0, + + .window_start = 0, + .window_len = 512, + + .range_min = 0, + .range_max = AR9331_SW_REG_PAGE - 4, + }, +}; + +static const struct regmap_access_table ar9331_register_set = { + .yes_ranges = ar9331_valid_regs, + .n_yes_ranges = ARRAY_SIZE(ar9331_valid_regs), +}; + +static const struct regmap_access_table ar9331_volatile_set = { + .no_ranges = ar9331_nonvolatile_regs, + .n_no_ranges = ARRAY_SIZE(ar9331_nonvolatile_regs), +}; + +static const struct regmap_config ar9331_mdio_regmap_config = { + .reg_bits = 32, + .val_bits = 32, + .reg_stride = 4, + .max_register = AR9331_SW_REG_PAGE, + + .ranges = ar9331_regmap_range, + .num_ranges = ARRAY_SIZE(ar9331_regmap_range), + + .volatile_table = &ar9331_volatile_set, + .wr_table = &ar9331_register_set, + .rd_table = &ar9331_register_set, + + .cache_type = REGCACHE_RBTREE, +}; + +static struct regmap_bus ar9331_sw_bus = { + .reg_format_endian_default = REGMAP_ENDIAN_NATIVE, + .val_format_endian_default = REGMAP_ENDIAN_NATIVE, + .read = ar9331_mdio_read, + .write = ar9331_sw_bus_write, + .max_raw_read = 4, + .max_raw_write = 4, +}; + +static int ar9331_sw_probe(struct mdio_device *mdiodev) +{ + struct ar9331_sw_priv *priv; + int ret; + + /* allocate the private data struct so that we can probe the switches + * ID register + */ + priv = devm_kzalloc(&mdiodev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->regmap = devm_regmap_init(&mdiodev->dev, &ar9331_sw_bus, priv, + &ar9331_mdio_regmap_config); + if (IS_ERR(priv->regmap)) { + ret = PTR_ERR(priv->regmap); + dev_err(&mdiodev->dev, "regmap init failed: %d\n", ret); + return ret; + } + + priv->sw_reset = devm_reset_control_get(&mdiodev->dev, "switch"); + if (IS_ERR(priv->sw_reset)) { + dev_err(&mdiodev->dev, "missing switch reset\n"); + return PTR_ERR(priv->sw_reset); + } + + priv->sbus = mdiodev->bus; + priv->dev = &mdiodev->dev; + + ret = ar9331_sw_irq_init(priv); + if (ret) + return ret; + + priv->ds = dsa_switch_alloc(&mdiodev->dev, AR9331_SW_PORTS); + if (!priv->ds) + return -ENOMEM; + + priv->ds->priv = priv; + priv->ops = ar9331_sw_ops; + priv->ds->ops = &priv->ops; + dev_set_drvdata(&mdiodev->dev, priv); + + return dsa_register_switch(priv->ds); +} + +static void ar9331_sw_remove(struct mdio_device *mdiodev) +{ + struct ar9331_sw_priv *priv = dev_get_drvdata(&mdiodev->dev); + + mdiobus_unregister(priv->mbus); + dsa_unregister_switch(priv->ds); + + reset_control_assert(priv->sw_reset); +} + +static const struct of_device_id ar9331_sw_of_match[] = { + { .compatible = "qca,ar9331-switch" }, + { }, +}; + +static struct mdio_driver ar9331_sw_mdio_driver = { + .probe = ar9331_sw_probe, + .remove = ar9331_sw_remove, + .mdiodrv.driver = { + .name = AR9331_SW_NAME, + .of_match_table = ar9331_sw_of_match, + }, +}; + +mdio_module_driver(ar9331_sw_mdio_driver); + +MODULE_AUTHOR("Oleksij Rempel "); +MODULE_DESCRIPTION("Driver for Atheros AR9331 switch"); +MODULE_LICENSE("GPL v2"); diff --git a/include/net/dsa.h b/include/net/dsa.h index 541fb514e31d..89a334e68d42 100644 --- a/include/net/dsa.h +++ b/include/net/dsa.h @@ -42,6 +42,7 @@ struct phylink_link_state; #define DSA_TAG_PROTO_8021Q_VALUE 12 #define DSA_TAG_PROTO_SJA1105_VALUE 13 #define DSA_TAG_PROTO_KSZ8795_VALUE 14 +#define DSA_TAG_PROTO_AR9331_VALUE 15 enum dsa_tag_protocol { DSA_TAG_PROTO_NONE = DSA_TAG_PROTO_NONE_VALUE, @@ -59,6 +60,7 @@ enum dsa_tag_protocol { DSA_TAG_PROTO_8021Q = DSA_TAG_PROTO_8021Q_VALUE, DSA_TAG_PROTO_SJA1105 = DSA_TAG_PROTO_SJA1105_VALUE, DSA_TAG_PROTO_KSZ8795 = DSA_TAG_PROTO_KSZ8795_VALUE, + DSA_TAG_PROTO_AR9331 = DSA_TAG_PROTO_AR9331_VALUE, }; struct packet_type; diff --git a/net/dsa/Kconfig b/net/dsa/Kconfig index 29e2bd5cc5af..6e015309a7fe 100644 --- a/net/dsa/Kconfig +++ b/net/dsa/Kconfig @@ -107,4 +107,10 @@ config NET_DSA_TAG_TRAILER Say Y or M if you want to enable support for tagging frames at with a trailed. e.g. Marvell 88E6060. +config NET_DSA_TAG_AR9331 + tristate "Tag driver for Atheros AR9331 SoC with build-in switch" + help + Say Y or M if you want to enable support for tagging frames for + the Atheros AR9331 SoC with build-in switch. + endif diff --git a/net/dsa/Makefile b/net/dsa/Makefile index 2c6d286f0511..67caebf602be 100644 --- a/net/dsa/Makefile +++ b/net/dsa/Makefile @@ -15,3 +15,4 @@ obj-$(CONFIG_NET_DSA_TAG_MTK) += tag_mtk.o obj-$(CONFIG_NET_DSA_TAG_QCA) += tag_qca.o obj-$(CONFIG_NET_DSA_TAG_SJA1105) += tag_sja1105.o obj-$(CONFIG_NET_DSA_TAG_TRAILER) += tag_trailer.o +obj-$(CONFIG_NET_DSA_TAG_AR9331) += tag_ar9331.o diff --git a/net/dsa/tag_ar9331.c b/net/dsa/tag_ar9331.c new file mode 100644 index 000000000000..b32a8d3d48b9 --- /dev/null +++ b/net/dsa/tag_ar9331.c @@ -0,0 +1,97 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2019 Pengutronix, Oleksij Rempel + */ + + +#include +#include + +#include "dsa_priv.h" + +#define AR9331_HDR_LEN 2 +#define AR9331_HDR_VERSION 1 + +#define AR9331_HDR_VERSION_MASK GENMASK(15, 14) +#define AR9331_HDR_PRIORITY_MASK GENMASK(13, 12) +#define AR9331_HDR_TYPE_MASK GENMASK(10, 8) +#define AR9331_HDR_BROADCAST BIT(7) +#define AR9331_HDR_FROM_CPU BIT(6) +/* AR9331_HDR_RESERVED - not used or may be version filed. + * According to the AR8216 doc it should 0b10. On AR9331 it is 0b11 on RX path + * and should be set to 0b11 to make it work. + */ +#define AR9331_HDR_RESERVED_MASK GENMASK(5, 4) +#define AR9331_HDR_PORT_NUM_MASK GENMASK(3, 0) + +static struct sk_buff *ar9331_tag_xmit(struct sk_buff *skb, + struct net_device *dev) +{ + struct dsa_port *dp = dsa_slave_to_port(dev); + __le16 *phdr; + u16 hdr; + + if (skb_cow_head(skb, 0) < 0) + return NULL; + + phdr = skb_push(skb, AR9331_HDR_LEN); + + hdr = FIELD_PREP(AR9331_HDR_VERSION_MASK, AR9331_HDR_VERSION); + hdr |= AR9331_HDR_FROM_CPU | dp->index; + /* 0b10 for AR8216 and 0b11 for AR9331 */ + hdr |= AR9331_HDR_RESERVED_MASK; + + phdr[0] = cpu_to_le16(hdr); + + return skb; +} + +static struct sk_buff *ar9331_tag_rcv(struct sk_buff *skb, + struct net_device *ndev, + struct packet_type *pt) +{ + u8 ver, port; + u16 hdr; + + if (unlikely(!pskb_may_pull(skb, AR9331_HDR_LEN))) + return NULL; + + hdr = le16_to_cpu(*(__le16 *)skb_mac_header(skb)); + + ver = FIELD_GET(AR9331_HDR_VERSION_MASK, hdr); + if (unlikely(ver != AR9331_HDR_VERSION)) { + netdev_warn(ndev, "%s:%i wrong header version 0x%2x\n", + __func__, __LINE__, hdr); + return NULL; + } + + if (unlikely(hdr & AR9331_HDR_FROM_CPU)) { + netdev_warn(ndev, "%s:%i packet should not be from cpu 0x%2x\n", + __func__, __LINE__, hdr); + return NULL; + } + + skb_pull(skb, AR9331_HDR_LEN); + skb_set_mac_header(skb, -ETH_HLEN); + + /* Get source port information */ + port = FIELD_GET(AR9331_HDR_PORT_NUM_MASK, hdr); + + skb->dev = dsa_master_find_slave(ndev, 0, port); + if (!skb->dev) + return NULL; + + return skb; +} + +static const struct dsa_device_ops ar9331_netdev_ops = { + .name = "ar9331", + .proto = DSA_TAG_PROTO_AR9331, + .xmit = ar9331_tag_xmit, + .rcv = ar9331_tag_rcv, + .overhead = AR9331_HDR_LEN, +}; + +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS_DSA_TAG_DRIVER(DSA_TAG_PROTO_AR9331); +module_dsa_tag_driver(ar9331_netdev_ops);