From patchwork Thu Nov 28 11:33:05 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Sandeep Maheswaram X-Patchwork-Id: 11265875 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 5ABAD6C1 for ; Thu, 28 Nov 2019 11:34:59 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 444DC217D6 for ; Thu, 28 Nov 2019 11:34:59 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726650AbfK1Le6 (ORCPT ); Thu, 28 Nov 2019 06:34:58 -0500 Received: from alexa-out-blr-01.qualcomm.com ([103.229.18.197]:3742 "EHLO alexa-out-blr-01.qualcomm.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726227AbfK1Le6 (ORCPT ); Thu, 28 Nov 2019 06:34:58 -0500 Received: from ironmsg02-blr.qualcomm.com ([10.86.208.131]) by alexa-out-blr-01.qualcomm.com with ESMTP/TLS/AES256-SHA; 28 Nov 2019 17:03:32 +0530 IronPort-SDR: JSFVpTrx+mZrMwt8CVyFQJoc6kWT2MZd7tT4Vttf4w5a32ZWSsx7GgazA8Y5mFLPIuFfk1UqoI 9YA4N3cITRixoQt1xxxn9FkntnymHJ0znq8tlOw76k4q1dHPSI2RnFzKOaxIlzqfXvwd1wikjg Bknl7V/EVW9vh7g34yDlUL/vlo5BUmaDZ9W9sBe+ZRkQ1nSZZ+jn45EvBAqrtQk2ZHkEKs97ln KYcdCx2gCxoqb6Pm/2WqYX0Dh9nn16TSAmRi0cbq80TJGuu5wDQPHR74/CjXOD0UpfMijNyvsj Si+WP0lgu152SxZLo9PvnUPE Received: from c-sanm-linux.qualcomm.com ([10.206.25.31]) by ironmsg02-blr.qualcomm.com with ESMTP; 28 Nov 2019 17:03:12 +0530 Received: by c-sanm-linux.qualcomm.com (Postfix, from userid 2343233) id 3A3CA19BC; Thu, 28 Nov 2019 17:03:11 +0530 (IST) From: Sandeep Maheswaram To: Andy Gross , Bjorn Andersson , Greg Kroah-Hartman , Rob Herring , Mark Rutland , Felipe Balbi , Stephen Boyd Cc: linux-arm-msm@vger.kernel.org, linux-usb@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Sandeep Maheswaram Subject: [PATCH v2 1/3] usb: dwc3: Add support for SC7180 SOC Date: Thu, 28 Nov 2019 17:03:05 +0530 Message-Id: <1574940787-1004-2-git-send-email-sanm@codeaurora.org> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1574940787-1004-1-git-send-email-sanm@codeaurora.org> References: <1574940787-1004-1-git-send-email-sanm@codeaurora.org> Sender: linux-usb-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-usb@vger.kernel.org Add compatible for SC7180 SOC in USB DWC3 driver Signed-off-by: Sandeep Maheswaram --- drivers/usb/dwc3/dwc3-qcom.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c index 261af9e..1df2372 100644 --- a/drivers/usb/dwc3/dwc3-qcom.c +++ b/drivers/usb/dwc3/dwc3-qcom.c @@ -1,5 +1,5 @@ // SPDX-License-Identifier: GPL-2.0 -/* Copyright (c) 2018, The Linux Foundation. All rights reserved. +/* Copyright (c) 2018-2019, The Linux Foundation. All rights reserved. * * Inspired by dwc3-of-simple.c */ @@ -753,6 +753,7 @@ static const struct of_device_id dwc3_qcom_of_match[] = { { .compatible = "qcom,dwc3" }, { .compatible = "qcom,msm8996-dwc3" }, { .compatible = "qcom,msm8998-dwc3" }, + { .compatible = "qcom,sc7180-dwc3" }, { .compatible = "qcom,sdm845-dwc3" }, { } }; From patchwork Thu Nov 28 11:33:06 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Sandeep Maheswaram X-Patchwork-Id: 11265867 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 07FB717F0 for ; Thu, 28 Nov 2019 11:33:41 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id D958E217D6 for ; Thu, 28 Nov 2019 11:33:40 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726545AbfK1Ldk (ORCPT ); Thu, 28 Nov 2019 06:33:40 -0500 Received: from alexa-out-blr-01.qualcomm.com ([103.229.18.197]:28167 "EHLO alexa-out-blr-01.qualcomm.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726383AbfK1Ldj (ORCPT ); Thu, 28 Nov 2019 06:33:39 -0500 Received: from ironmsg02-blr.qualcomm.com ([10.86.208.131]) by alexa-out-blr-01.qualcomm.com with ESMTP/TLS/AES256-SHA; 28 Nov 2019 17:03:32 +0530 IronPort-SDR: qaAwLWiBhTycdIgQjI1VRac2sYSm3bP8PCucdsT0URiY8D5xaa2Ar9Yder4aHsP1mARgJ42LU0 kupfEYpqVykBQ58JOBuoTT2XAxXxkgNjc1mWGvrO/8e1+0+P/K397ZiIZvm99LubwMvGaFaKc3 GuDVwF8ZoTmePZ6iH/bab+bc5L7ud5QWTnAUOY87x2HyAAgQDHerD70uYQThe0aavVLlGYJMgo yUQB9MyBi1zHFsA4Frnt2iWu3nwKTEv1ZEaoaiuZDPqJyBVkT7m4r7a8qqcRXSzLoEfcJvgajE ZnWAMy48QBNqpuNRFnAQlhB6 Received: from c-sanm-linux.qualcomm.com ([10.206.25.31]) by ironmsg02-blr.qualcomm.com with ESMTP; 28 Nov 2019 17:03:13 +0530 Received: by c-sanm-linux.qualcomm.com (Postfix, from userid 2343233) id 1A0FF19B8; Thu, 28 Nov 2019 17:03:12 +0530 (IST) From: Sandeep Maheswaram To: Andy Gross , Bjorn Andersson , Greg Kroah-Hartman , Rob Herring , Mark Rutland , Felipe Balbi , Stephen Boyd Cc: linux-arm-msm@vger.kernel.org, linux-usb@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Sandeep Maheswaram Subject: [PATCH v2 2/3] dt-bindings: usb: qcom,dwc3: Convert USB DWC3 bindings Date: Thu, 28 Nov 2019 17:03:06 +0530 Message-Id: <1574940787-1004-3-git-send-email-sanm@codeaurora.org> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1574940787-1004-1-git-send-email-sanm@codeaurora.org> References: <1574940787-1004-1-git-send-email-sanm@codeaurora.org> Sender: linux-usb-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-usb@vger.kernel.org Convert USB DWC3 bindings to DT schema format using json-schema. Signed-off-by: Sandeep Maheswaram --- .../devicetree/bindings/usb/qcom,dwc3.txt | 104 -------------- .../devicetree/bindings/usb/qcom,dwc3.yaml | 155 +++++++++++++++++++++ 2 files changed, 155 insertions(+), 104 deletions(-) delete mode 100644 Documentation/devicetree/bindings/usb/qcom,dwc3.txt create mode 100644 Documentation/devicetree/bindings/usb/qcom,dwc3.yaml diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.txt b/Documentation/devicetree/bindings/usb/qcom,dwc3.txt deleted file mode 100644 index cb695aa..0000000 --- a/Documentation/devicetree/bindings/usb/qcom,dwc3.txt +++ /dev/null @@ -1,104 +0,0 @@ -Qualcomm SuperSpeed DWC3 USB SoC controller - -Required properties: -- compatible: Compatible list, contains - "qcom,dwc3" - "qcom,msm8996-dwc3" for msm8996 SOC. - "qcom,msm8998-dwc3" for msm8998 SOC. - "qcom,sdm845-dwc3" for sdm845 SOC. -- reg: Offset and length of register set for QSCRATCH wrapper -- power-domains: specifies a phandle to PM domain provider node -- clocks: A list of phandle + clock-specifier pairs for the - clocks listed in clock-names -- clock-names: Should contain the following: - "core" Master/Core clock, have to be >= 125 MHz for SS - operation and >= 60MHz for HS operation - "mock_utmi" Mock utmi clock needed for ITP/SOF generation in - host mode. Its frequency should be 19.2MHz. - "sleep" Sleep clock, used for wakeup when USB3 core goes - into low power mode (U3). - -Optional clocks: - "iface" System bus AXI clock. - Not present on "qcom,msm8996-dwc3" compatible. - "cfg_noc" System Config NOC clock. - Not present on "qcom,msm8996-dwc3" compatible. -- assigned-clocks: Should be: - MOCK_UTMI_CLK - MASTER_CLK -- assigned-clock-rates: Should be: - 19.2Mhz (192000000) for MOCK_UTMI_CLK - >=125Mhz (125000000) for MASTER_CLK in SS mode - >=60Mhz (60000000) for MASTER_CLK in HS mode - -Optional properties: -- resets: Phandle to reset control that resets core and wrapper. -- interrupts: specifies interrupts from controller wrapper used - to wakeup from low power/susepnd state. Must contain - one or more entry for interrupt-names property -- interrupt-names: Must include the following entries: - - "hs_phy_irq": The interrupt that is asserted when a - wakeup event is received on USB2 bus - - "ss_phy_irq": The interrupt that is asserted when a - wakeup event is received on USB3 bus - - "dm_hs_phy_irq" and "dp_hs_phy_irq": Separate - interrupts for any wakeup event on DM and DP lines -- qcom,select-utmi-as-pipe-clk: if present, disable USB3 pipe_clk requirement. - Used when dwc3 operates without SSPHY and only - HS/FS/LS modes are supported. - -Required child node: -A child node must exist to represent the core DWC3 IP block. The name of -the node is not important. The content of the node is defined in dwc3.txt. - -Phy documentation is provided in the following places: -Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt - USB3 QMP PHY -Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt - USB2 QUSB2 PHY - -Example device nodes: - - hs_phy: phy@100f8800 { - compatible = "qcom,qusb2-v2-phy"; - ... - }; - - ss_phy: phy@100f8830 { - compatible = "qcom,qmp-v3-usb3-phy"; - ... - }; - - usb3_0: usb30@a6f8800 { - compatible = "qcom,dwc3"; - reg = <0xa6f8800 0x400>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - interrupts = <0 131 0>, <0 486 0>, <0 488 0>, <0 489 0>; - interrupt-names = "hs_phy_irq", "ss_phy_irq", - "dm_hs_phy_irq", "dp_hs_phy_irq"; - - clocks = <&gcc GCC_USB30_PRIM_MASTER_CLK>, - <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, - <&gcc GCC_USB30_PRIM_SLEEP_CLK>; - clock-names = "core", "mock_utmi", "sleep"; - - assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, - <&gcc GCC_USB30_PRIM_MASTER_CLK>; - assigned-clock-rates = <19200000>, <133000000>; - - resets = <&gcc GCC_USB30_PRIM_BCR>; - reset-names = "core_reset"; - power-domains = <&gcc USB30_PRIM_GDSC>; - qcom,select-utmi-as-pipe-clk; - - dwc3@10000000 { - compatible = "snps,dwc3"; - reg = <0x10000000 0xcd00>; - interrupts = <0 205 0x4>; - phys = <&hs_phy>, <&ss_phy>; - phy-names = "usb2-phy", "usb3-phy"; - dr_mode = "host"; - }; - }; - diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml new file mode 100644 index 0000000..48ff9c5 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml @@ -0,0 +1,155 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/qcom,dwc3.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SuperSpeed DWC3 USB SoC controller + +maintainers: + - Manu Gautam + +properties: + compatible: + items: + - enum: + - qcom,msm8996-dwc3 + - qcom,msm8998-dwc3 + - qcom,sdm845-dwc3 + - const: qcom,dwc3 + + reg: + description: Offset and length of register set for QSCRATCH wrapper + maxItems: 1 + + power-domains: + description: specifies a phandle to PM domain provider node + maxItems: 1 + + clocks: + description: + A list of phandle and clock-specifier pairs for the clocks + listed in clock-names. + maxItems: 5 + + clock-names: + maxItems: 5 + items: + #Master/Core clock, have to be >= 125 MHz for SS operation + # and >= 60MHz for HS operation + - const: core + #Mock utmi clock needed for ITP/SOF generation in host mode. + #Its frequency should be 19.2MHz. + - const: mock_utmi + #Sleep clock, used for wakeup when USB3 core goes into low power mode (U3). + - const: sleep + #Optional:System bus AXI clock.Not present on "qcom,msm8996-dwc3" compatible. + - const: iface + #Optional:System Config NOC clock.Not present on "qcom,msm8996-dwc3" compatible. + - const: cfg_noc + + assigned-clocks: + description: + Should be MOCK_UTMI_CLK and MASTER_CLK + maxItems: 2 + + assigned-clock-rates: + description: + Should be 19.2Mhz (192000000) for MOCK_UTMI_CLK + >=125Mhz (125000000) for MASTER_CLK in SS mode + >=60Mhz (60000000) for MASTER_CLK in HS mode + maxItems: 2 + + resets: + maxItems: 1 + description: Phandle to reset control that resets core and wrapper. + + interrupts: + description: + specifies interrupts from controller wrapper used + to wakeup from low power/suspend state.Must contain + one or more entry for interrupt-names property + + interrupt-names: + $ref: /schemas/types.yaml#/definitions/string-array + items: + #The interrupt that is asserted when a wakeup event + #is received on USB2 bus + - const: hs_phy_irq + #The interrupt that is asserted when a wakeup event + #is received on USB3 bus + - const: ss_phy_irq + #Separate interrupts for any wakeup event on DM and DP lines + - const: dm_hs_phy_irq + - const: dp_hs_phy_irq + + qcom,select-utmi-as-pipe-clk: + description: + if present, disable USB3 pipe_clk requirement. + Used when dwc3 operates without SSPHY and only + HS/FS/LS modes are supported. + type: boolean + +#Required child node: +#A child node must exist to represent the core DWC3 IP block. The name of +#the node is not important. The content of the node is defined in dwc3.txt. + +#Phy documentation is provided in the following places: +#Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt - USB3 QMP PHY +#Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt - USB2 QUSB2 PHY + +required: + - compatible + - reg + - power-domains + - clocks + - clock-names + - assigned-clocks + - assigned-clock-rates + +examples: + - | + hs_phy: phy@100f8800 { + compatible = "qcom,qusb2-v2-phy"; + ... + }; + + ss_phy: phy@100f8830 { + compatible = "qcom,qmp-v3-usb3-phy"; + ... + }; + + usb3_0: usb30@a6f8800 { + compatible = "qcom,dwc3"; + reg = <0xa6f8800 0x400>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + interrupts = <0 131 0>, <0 486 0>, <0 488 0>, <0 489 0>; + interrupt-names = "hs_phy_irq", "ss_phy_irq", + "dm_hs_phy_irq", "dp_hs_phy_irq"; + + clocks = <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>; + clock-names = "core", "mock_utmi", "sleep"; + + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>; + assigned-clock-rates = <19200000>, <133000000>; + + resets = <&gcc GCC_USB30_PRIM_BCR>; + reset-names = "core_reset"; + power-domains = <&gcc USB30_PRIM_GDSC>; + qcom,select-utmi-as-pipe-clk; + + dwc3@10000000 { + compatible = "snps,dwc3"; + reg = <0x10000000 0xcd00>; + interrupts = <0 205 0x4>; + phys = <&hs_phy>, <&ss_phy>; + phy-names = "usb2-phy", "usb3-phy"; + dr_mode = "host"; + }; + }; From patchwork Thu Nov 28 11:33:07 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Sandeep Maheswaram X-Patchwork-Id: 11265863 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 0FC0D17F0 for ; Thu, 28 Nov 2019 11:33:39 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id E24E721787 for ; Thu, 28 Nov 2019 11:33:38 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726496AbfK1Ldi (ORCPT ); Thu, 28 Nov 2019 06:33:38 -0500 Received: from alexa-out-blr-01.qualcomm.com ([103.229.18.197]:42005 "EHLO alexa-out-blr-01.qualcomm.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726191AbfK1Ldi (ORCPT ); Thu, 28 Nov 2019 06:33:38 -0500 Received: from ironmsg02-blr.qualcomm.com ([10.86.208.131]) by alexa-out-blr-01.qualcomm.com with ESMTP/TLS/AES256-SHA; 28 Nov 2019 17:03:32 +0530 IronPort-SDR: K08YTXR/j9WhCTvgCZWgAEPnFY17rVFk/lxj+crc66ef+AmFveKQMBBRHtmECy16DVCRdDJWsy XpOFcDrlGgwFQVOP3RK1TEH6UqGptdIk0uiM2zlI1PuhScrnYwoL8C1zhLdd0HAkZw9ouoVV+4 uBzRfUZVrBw+Cmw16JgihhmLIEaSOXvY0x2zxla8jH5yC2CrDQqPkloJYynp5jqNIGiGuQNApM XGjSatqmJfTI8ijFhk1CQ0nEJDv8sE7T9QUb+y7WWr0OLyIXiIQegAzyrJO07xtyyX4dlkTYK5 MAVN8Rm1CC/Jo36uiqlRsPFp Received: from c-sanm-linux.qualcomm.com ([10.206.25.31]) by ironmsg02-blr.qualcomm.com with ESMTP; 28 Nov 2019 17:03:14 +0530 Received: by c-sanm-linux.qualcomm.com (Postfix, from userid 2343233) id E1A8319C2; Thu, 28 Nov 2019 17:03:12 +0530 (IST) From: Sandeep Maheswaram To: Andy Gross , Bjorn Andersson , Greg Kroah-Hartman , Rob Herring , Mark Rutland , Felipe Balbi , Stephen Boyd Cc: linux-arm-msm@vger.kernel.org, linux-usb@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Sandeep Maheswaram Subject: [PATCH v2 3/3] dt-bindings: usb: qcom,dwc3: Add compatible for SC7180 Date: Thu, 28 Nov 2019 17:03:07 +0530 Message-Id: <1574940787-1004-4-git-send-email-sanm@codeaurora.org> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1574940787-1004-1-git-send-email-sanm@codeaurora.org> References: <1574940787-1004-1-git-send-email-sanm@codeaurora.org> Sender: linux-usb-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-usb@vger.kernel.org Add compatible for SC7180 in usb dwc3 bindings. Signed-off-by: Sandeep Maheswaram Reviewed-by: Douglas Anderson Acked-by: Rob Herring --- Documentation/devicetree/bindings/usb/qcom,dwc3.yaml | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml index 48ff9c5..3eab91a 100644 --- a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml @@ -15,6 +15,7 @@ properties: - enum: - qcom,msm8996-dwc3 - qcom,msm8998-dwc3 + - qcom,sc7180-dwc3 - qcom,sdm845-dwc3 - const: qcom,dwc3