From patchwork Wed Jan 15 10:59:43 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Claudiu Beznea X-Patchwork-Id: 11333753 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id CE5C9138D for ; Wed, 15 Jan 2020 11:00:06 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id B71392467A for ; Wed, 15 Jan 2020 11:00:06 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1729996AbgAOLAG (ORCPT ); Wed, 15 Jan 2020 06:00:06 -0500 Received: from esa2.microchip.iphmx.com ([68.232.149.84]:46366 "EHLO esa2.microchip.iphmx.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1729548AbgAOLAF (ORCPT ); Wed, 15 Jan 2020 06:00:05 -0500 Received-SPF: Pass (esa2.microchip.iphmx.com: domain of Claudiu.Beznea@microchip.com designates 198.175.253.82 as permitted sender) identity=mailfrom; client-ip=198.175.253.82; receiver=esa2.microchip.iphmx.com; envelope-from="Claudiu.Beznea@microchip.com"; x-sender="Claudiu.Beznea@microchip.com"; x-conformance=spf_only; x-record-type="v=spf1"; x-record-text="v=spf1 mx a:ushub1.microchip.com a:smtpout.microchip.com -exists:%{i}.spf.microchip.iphmx.com include:servers.mcsv.net include:mktomail.com include:spf.protection.outlook.com ~all" Received-SPF: None (esa2.microchip.iphmx.com: no sender authenticity information available from domain of postmaster@email.microchip.com) identity=helo; client-ip=198.175.253.82; receiver=esa2.microchip.iphmx.com; envelope-from="Claudiu.Beznea@microchip.com"; x-sender="postmaster@email.microchip.com"; x-conformance=spf_only Authentication-Results: esa2.microchip.iphmx.com; dkim=none (message not signed) header.i=none; spf=Pass smtp.mailfrom=Claudiu.Beznea@microchip.com; spf=None smtp.helo=postmaster@email.microchip.com; dmarc=pass (p=none dis=none) d=microchip.com IronPort-SDR: Z6KtekZloFkinvRv77z8vmNWIxUmeUJqbJHua9kf7PNNjkq7tWhxMEt+0AiStmxjqOcEbjmARt Mzbi5IBag9dcXf6b1X4GuC63FvugllK5qdiLEBOzkcPuE6k4jQW2/uR/TbxnYd1guW6M5Huh90 ZEaAzNuYbXebIqOLw4B7QV+0nVsyXuI0twA2dtPQGLW+8t2hQOhUJArxU8dJ3auVDIl/QtUsaf 9gI/yZzH3uPcvYc+KRMx+HzYvkITsDrWePlDNjP1XMwPcKF9iOpndxailMGqzGllVlOLSZh4ZZ RRA= X-IronPort-AV: E=Sophos;i="5.70,322,1574146800"; d="scan'208";a="62669471" Received: from smtpout.microchip.com (HELO email.microchip.com) ([198.175.253.82]) by esa2.microchip.iphmx.com with ESMTP/TLS/AES256-SHA256; 15 Jan 2020 04:00:04 -0700 Received: from chn-vm-ex01.mchp-main.com (10.10.85.143) by chn-vm-ex04.mchp-main.com (10.10.85.152) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.1.1713.5; Wed, 15 Jan 2020 04:00:04 -0700 Received: from m18063-ThinkPad-T460p.mchp-main.com (10.10.85.251) by chn-vm-ex01.mchp-main.com (10.10.85.143) with Microsoft SMTP Server id 15.1.1713.5 via Frontend Transport; Wed, 15 Jan 2020 04:00:00 -0700 From: Claudiu Beznea To: , , , , , , , , CC: , , , , , Claudiu Beznea Subject: [PATCH v4 1/5] dt-bindings: atmel,at91rm9200-rtc: add microchip,sam9x60-rtc Date: Wed, 15 Jan 2020 12:59:43 +0200 Message-ID: <1579085987-13976-2-git-send-email-claudiu.beznea@microchip.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1579085987-13976-1-git-send-email-claudiu.beznea@microchip.com> References: <1579085987-13976-1-git-send-email-claudiu.beznea@microchip.com> MIME-Version: 1.0 Sender: linux-spi-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-spi@vger.kernel.org Add microchip,sam9x60-rtc to DT bindings documentation. Signed-off-by: Claudiu Beznea Acked-by: Rob Herring --- Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.txt | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.txt b/Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.txt index 5d3791e789c6..35eab9138d0b 100644 --- a/Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.txt +++ b/Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.txt @@ -1,7 +1,8 @@ Atmel AT91RM9200 Real Time Clock Required properties: -- compatible: should be: "atmel,at91rm9200-rtc" or "atmel,at91sam9x5-rtc" +- compatible: should be: "atmel,at91rm9200-rtc", "atmel,at91sam9x5-rtc" or + "microchip,sam9x60-rtc" - reg: physical base address of the controller and length of memory mapped region. - interrupts: rtc alarm/event interrupt From patchwork Wed Jan 15 10:59:44 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Claudiu Beznea X-Patchwork-Id: 11333755 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id E0281138D for ; Wed, 15 Jan 2020 11:00:11 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id C828624680 for ; Wed, 15 Jan 2020 11:00:11 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1730037AbgAOLAL (ORCPT ); Wed, 15 Jan 2020 06:00:11 -0500 Received: from esa3.microchip.iphmx.com ([68.232.153.233]:41300 "EHLO esa3.microchip.iphmx.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1729548AbgAOLAK (ORCPT ); Wed, 15 Jan 2020 06:00:10 -0500 Received-SPF: Pass (esa3.microchip.iphmx.com: domain of Claudiu.Beznea@microchip.com designates 198.175.253.82 as permitted sender) identity=mailfrom; client-ip=198.175.253.82; receiver=esa3.microchip.iphmx.com; envelope-from="Claudiu.Beznea@microchip.com"; x-sender="Claudiu.Beznea@microchip.com"; x-conformance=spf_only; x-record-type="v=spf1"; x-record-text="v=spf1 mx a:ushub1.microchip.com a:smtpout.microchip.com -exists:%{i}.spf.microchip.iphmx.com include:servers.mcsv.net include:mktomail.com include:spf.protection.outlook.com ~all" Received-SPF: None (esa3.microchip.iphmx.com: no sender authenticity information available from domain of postmaster@email.microchip.com) identity=helo; client-ip=198.175.253.82; receiver=esa3.microchip.iphmx.com; envelope-from="Claudiu.Beznea@microchip.com"; x-sender="postmaster@email.microchip.com"; x-conformance=spf_only Authentication-Results: esa3.microchip.iphmx.com; dkim=none (message not signed) header.i=none; spf=Pass smtp.mailfrom=Claudiu.Beznea@microchip.com; spf=None smtp.helo=postmaster@email.microchip.com; dmarc=pass (p=none dis=none) d=microchip.com IronPort-SDR: MaOFfNFTs9alxrjycrqIYBAJp43q2qBcL/6RbTBRSV3ubw97WuXB60VNJnN+t2pVFQoH8h+IKZ X8/GuPj+RLsSUxROCE/40hiSGdDdWJRh6aM0xHlhFZMHMT7oos/GVlgj6tXxgVkMV6mvdzkVeV l3y7k0jPsSSpatfWLtGe944ommr9zqMOM9fYBell8CgeFU1F7qAjuLuBYaFc8P5mYwpruMRipE 2tLD6Eu5o2N1JGQlnXgfZn42Ck155VqyWpLoxJRQ2fhDj1s5j8yaxgqUAvco/8hD4mGYuPkgJ7 RaU= X-IronPort-AV: E=Sophos;i="5.70,322,1574146800"; d="scan'208";a="63325764" Received: from smtpout.microchip.com (HELO email.microchip.com) ([198.175.253.82]) by esa3.microchip.iphmx.com with ESMTP/TLS/AES256-SHA256; 15 Jan 2020 04:00:09 -0700 Received: from chn-vm-ex01.mchp-main.com (10.10.85.143) by chn-vm-ex04.mchp-main.com (10.10.85.152) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.1.1713.5; Wed, 15 Jan 2020 04:00:09 -0700 Received: from m18063-ThinkPad-T460p.mchp-main.com (10.10.85.251) by chn-vm-ex01.mchp-main.com (10.10.85.143) with Microsoft SMTP Server id 15.1.1713.5 via Frontend Transport; Wed, 15 Jan 2020 04:00:04 -0700 From: Claudiu Beznea To: , , , , , , , , CC: , , , , , Claudiu Beznea Subject: [PATCH v4 2/5] dt-bindings: atmel-usart: remove wildcard Date: Wed, 15 Jan 2020 12:59:44 +0200 Message-ID: <1579085987-13976-3-git-send-email-claudiu.beznea@microchip.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1579085987-13976-1-git-send-email-claudiu.beznea@microchip.com> References: <1579085987-13976-1-git-send-email-claudiu.beznea@microchip.com> MIME-Version: 1.0 Sender: linux-spi-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-spi@vger.kernel.org Remove chip whildcard and introduce the list of compatibles instead. Signed-off-by: Claudiu Beznea --- Documentation/devicetree/bindings/mfd/atmel-usart.txt | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/Documentation/devicetree/bindings/mfd/atmel-usart.txt b/Documentation/devicetree/bindings/mfd/atmel-usart.txt index 699fd3c9ace8..614a14b5d205 100644 --- a/Documentation/devicetree/bindings/mfd/atmel-usart.txt +++ b/Documentation/devicetree/bindings/mfd/atmel-usart.txt @@ -1,10 +1,11 @@ * Atmel Universal Synchronous Asynchronous Receiver/Transmitter (USART) Required properties for USART: -- compatible: Should be "atmel,-usart" or "atmel,-dbgu" - The compatible indicated will be the first SoC to support an - additional mode or an USART new feature. - For the dbgu UART, use "atmel,-dbgu", "atmel,-usart" +- compatible: Should be one of the following: + - "atmel,at91rm9200-usart" + - "atmel,at91sam9260-usart" + - "atmel,at91rm9200-dbgu", "atmel,at91rm9200-usart" + - "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart" - reg: Should contain registers location and length - interrupts: Should contain interrupt - clock-names: tuple listing input clock names. From patchwork Wed Jan 15 10:59:45 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Claudiu Beznea X-Patchwork-Id: 11333759 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id B467A13B4 for ; Wed, 15 Jan 2020 11:00:16 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 9D89A2187F for ; Wed, 15 Jan 2020 11:00:16 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1730076AbgAOLAP (ORCPT ); Wed, 15 Jan 2020 06:00:15 -0500 Received: from esa4.microchip.iphmx.com ([68.232.154.123]:52580 "EHLO esa4.microchip.iphmx.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1729548AbgAOLAP (ORCPT ); Wed, 15 Jan 2020 06:00:15 -0500 Received-SPF: Pass (esa4.microchip.iphmx.com: domain of Claudiu.Beznea@microchip.com designates 198.175.253.82 as permitted sender) identity=mailfrom; client-ip=198.175.253.82; receiver=esa4.microchip.iphmx.com; envelope-from="Claudiu.Beznea@microchip.com"; x-sender="Claudiu.Beznea@microchip.com"; x-conformance=spf_only; x-record-type="v=spf1"; x-record-text="v=spf1 mx a:ushub1.microchip.com a:smtpout.microchip.com -exists:%{i}.spf.microchip.iphmx.com include:servers.mcsv.net include:mktomail.com include:spf.protection.outlook.com ~all" Received-SPF: None (esa4.microchip.iphmx.com: no sender authenticity information available from domain of postmaster@email.microchip.com) identity=helo; client-ip=198.175.253.82; receiver=esa4.microchip.iphmx.com; envelope-from="Claudiu.Beznea@microchip.com"; x-sender="postmaster@email.microchip.com"; x-conformance=spf_only Authentication-Results: esa4.microchip.iphmx.com; dkim=none (message not signed) header.i=none; spf=Pass smtp.mailfrom=Claudiu.Beznea@microchip.com; spf=None smtp.helo=postmaster@email.microchip.com; dmarc=pass (p=none dis=none) d=microchip.com IronPort-SDR: rWUf1hTYLw75fP3RQE0fAvy7m4O0YK5adefawMX1AZxtMQVNazk9Z76Q6YTpT118IyqrhylAFL VaZCa+fsLobkmOaQZl9lHOiRUfpnCDS2PlxI0GN+koy3OORfeJR6KP/zwiNjpqLuO4Tb/PJxN3 PaJScgk43s/wCz68fzhWF12htNScIJCzAU1BP+S5YnILv/GH2kKwP7RyjX2uWrL1us26g+eFo2 EZ/V50h4rltqBtpOK+IE98ekcDs6qo6IM0cKtp1T4frKSSq89CvR0zvbrY0WMSQAnVt3730mWz L/g= X-IronPort-AV: E=Sophos;i="5.70,322,1574146800"; d="scan'208";a="61145018" Received: from smtpout.microchip.com (HELO email.microchip.com) ([198.175.253.82]) by esa4.microchip.iphmx.com with ESMTP/TLS/AES256-SHA256; 15 Jan 2020 04:00:14 -0700 Received: from chn-vm-ex01.mchp-main.com (10.10.85.143) by chn-vm-ex01.mchp-main.com (10.10.85.143) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.1.1713.5; Wed, 15 Jan 2020 04:00:13 -0700 Received: from m18063-ThinkPad-T460p.mchp-main.com (10.10.85.251) by chn-vm-ex01.mchp-main.com (10.10.85.143) with Microsoft SMTP Server id 15.1.1713.5 via Frontend Transport; Wed, 15 Jan 2020 04:00:09 -0700 From: Claudiu Beznea To: , , , , , , , , CC: , , , , , Claudiu Beznea Subject: [PATCH v4 3/5] dt-bindings: atmel-usart: add microchip,sam9x60-{usart, dbgu} Date: Wed, 15 Jan 2020 12:59:45 +0200 Message-ID: <1579085987-13976-4-git-send-email-claudiu.beznea@microchip.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1579085987-13976-1-git-send-email-claudiu.beznea@microchip.com> References: <1579085987-13976-1-git-send-email-claudiu.beznea@microchip.com> MIME-Version: 1.0 Sender: linux-spi-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-spi@vger.kernel.org Add microchip,sam9x60-usart and add microchip,sam9x60-dbgu to DT bindings documentation. Signed-off-by: Claudiu Beznea --- Documentation/devicetree/bindings/mfd/atmel-usart.txt | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/mfd/atmel-usart.txt b/Documentation/devicetree/bindings/mfd/atmel-usart.txt index 614a14b5d205..a09133066aff 100644 --- a/Documentation/devicetree/bindings/mfd/atmel-usart.txt +++ b/Documentation/devicetree/bindings/mfd/atmel-usart.txt @@ -4,8 +4,10 @@ Required properties for USART: - compatible: Should be one of the following: - "atmel,at91rm9200-usart" - "atmel,at91sam9260-usart" + - "microchip,sam9x60-usart" - "atmel,at91rm9200-dbgu", "atmel,at91rm9200-usart" - "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart" + - "microchip,sam9x60-dbgu", "microchip,sam9x60-usart" - reg: Should contain registers location and length - interrupts: Should contain interrupt - clock-names: tuple listing input clock names. From patchwork Wed Jan 15 10:59:46 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Claudiu Beznea X-Patchwork-Id: 11333763 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 3A094138D for ; Wed, 15 Jan 2020 11:00:25 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 2300F24679 for ; Wed, 15 Jan 2020 11:00:25 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1730106AbgAOLAU (ORCPT ); Wed, 15 Jan 2020 06:00:20 -0500 Received: from esa1.microchip.iphmx.com ([68.232.147.91]:20213 "EHLO esa1.microchip.iphmx.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1729548AbgAOLAU (ORCPT ); Wed, 15 Jan 2020 06:00:20 -0500 Received-SPF: Pass (esa1.microchip.iphmx.com: domain of Claudiu.Beznea@microchip.com designates 198.175.253.82 as permitted sender) identity=mailfrom; client-ip=198.175.253.82; receiver=esa1.microchip.iphmx.com; envelope-from="Claudiu.Beznea@microchip.com"; x-sender="Claudiu.Beznea@microchip.com"; x-conformance=spf_only; x-record-type="v=spf1"; x-record-text="v=spf1 mx a:ushub1.microchip.com a:smtpout.microchip.com -exists:%{i}.spf.microchip.iphmx.com include:servers.mcsv.net include:mktomail.com include:spf.protection.outlook.com ~all" Received-SPF: None (esa1.microchip.iphmx.com: no sender authenticity information available from domain of postmaster@email.microchip.com) identity=helo; client-ip=198.175.253.82; receiver=esa1.microchip.iphmx.com; envelope-from="Claudiu.Beznea@microchip.com"; x-sender="postmaster@email.microchip.com"; x-conformance=spf_only Authentication-Results: esa1.microchip.iphmx.com; dkim=none (message not signed) header.i=none; spf=Pass smtp.mailfrom=Claudiu.Beznea@microchip.com; spf=None smtp.helo=postmaster@email.microchip.com; dmarc=pass (p=none dis=none) d=microchip.com IronPort-SDR: G1fYJyy/7lt8T/8IyJtk86yJ2p3O/WVJcrSqc4v/TjD5A1pMQKgERmAZvtkfSQGVD1R2hvZ/oW Yal7dnUbsv/YlzCBStCnMgV1nDjjV33k8kIXtxMlrUXPJR7Zz22x5uJH+idD+WKt2P63SKLRlw CA3xplHUd3eWBoz9uAAh1YY3cS4cfDZKtdgCsasUKWrIaNm/L8xK2FSC1PQWC2gT5lHH2a4+gr PYXSC9mvUDk7gGAgoNcfnhm8sYCePCLuPPjm5lSB7K244LguHwT9TuL3wgqx0dGdhm5WBkk/jL BSA= X-IronPort-AV: E=Sophos;i="5.70,322,1574146800"; d="scan'208";a="64798624" Received: from smtpout.microchip.com (HELO email.microchip.com) ([198.175.253.82]) by esa1.microchip.iphmx.com with ESMTP/TLS/AES256-SHA256; 15 Jan 2020 04:00:18 -0700 Received: from chn-vm-ex01.mchp-main.com (10.10.85.143) by chn-vm-ex02.mchp-main.com (10.10.85.144) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.1.1713.5; Wed, 15 Jan 2020 04:00:18 -0700 Received: from m18063-ThinkPad-T460p.mchp-main.com (10.10.85.251) by chn-vm-ex01.mchp-main.com (10.10.85.143) with Microsoft SMTP Server id 15.1.1713.5 via Frontend Transport; Wed, 15 Jan 2020 04:00:14 -0700 From: Claudiu Beznea To: , , , , , , , , CC: , , , , , Claudiu Beznea Subject: [PATCH v4 4/5] ARM: at91/defconfig: enable MMC_SDHCI_OF_AT91 and MICROCHIP_PIT64B Date: Wed, 15 Jan 2020 12:59:46 +0200 Message-ID: <1579085987-13976-5-git-send-email-claudiu.beznea@microchip.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1579085987-13976-1-git-send-email-claudiu.beznea@microchip.com> References: <1579085987-13976-1-git-send-email-claudiu.beznea@microchip.com> MIME-Version: 1.0 Sender: linux-spi-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-spi@vger.kernel.org Enable MMC_SDHCI_OF_AT91 and MICROCHIP_PIT64B. These are necessary for SAM9X60. Signed-off-by: Claudiu Beznea --- arch/arm/configs/at91_dt_defconfig | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig index 5c5df8bc0074..f66bb98a5cce 100644 --- a/arch/arm/configs/at91_dt_defconfig +++ b/arch/arm/configs/at91_dt_defconfig @@ -160,6 +160,9 @@ CONFIG_USB_AT91=y CONFIG_USB_ATMEL_USBA=y CONFIG_USB_G_SERIAL=y CONFIG_MMC=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_PLTFM=y +CONFIG_MMC_SDHCI_OF_AT91=y CONFIG_MMC_ATMELMCI=y CONFIG_MMC_SPI=y CONFIG_NEW_LEDS=y @@ -177,6 +180,7 @@ CONFIG_RTC_DRV_AT91SAM9=y CONFIG_DMADEVICES=y CONFIG_AT_HDMAC=y CONFIG_AT_XDMAC=y +CONFIG_MICROCHIP_PIT64B=y # CONFIG_IOMMU_SUPPORT is not set CONFIG_IIO=y CONFIG_AT91_ADC=y From patchwork Wed Jan 15 10:59:47 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Claudiu Beznea X-Patchwork-Id: 11333765 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 970F713B4 for ; Wed, 15 Jan 2020 11:00:27 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 57C1324679 for ; Wed, 15 Jan 2020 11:00:27 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1729548AbgAOLA1 (ORCPT ); Wed, 15 Jan 2020 06:00:27 -0500 Received: from esa6.microchip.iphmx.com ([216.71.154.253]:17400 "EHLO esa6.microchip.iphmx.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1729057AbgAOLA0 (ORCPT ); Wed, 15 Jan 2020 06:00:26 -0500 Received-SPF: Pass (esa6.microchip.iphmx.com: domain of Claudiu.Beznea@microchip.com designates 198.175.253.82 as permitted sender) identity=mailfrom; client-ip=198.175.253.82; receiver=esa6.microchip.iphmx.com; envelope-from="Claudiu.Beznea@microchip.com"; x-sender="Claudiu.Beznea@microchip.com"; x-conformance=spf_only; x-record-type="v=spf1"; x-record-text="v=spf1 mx a:ushub1.microchip.com a:smtpout.microchip.com -exists:%{i}.spf.microchip.iphmx.com include:servers.mcsv.net include:mktomail.com include:spf.protection.outlook.com ~all" Received-SPF: None (esa6.microchip.iphmx.com: no sender authenticity information available from domain of postmaster@email.microchip.com) identity=helo; client-ip=198.175.253.82; receiver=esa6.microchip.iphmx.com; envelope-from="Claudiu.Beznea@microchip.com"; x-sender="postmaster@email.microchip.com"; x-conformance=spf_only Authentication-Results: esa6.microchip.iphmx.com; dkim=none (message not signed) header.i=none; spf=Pass smtp.mailfrom=Claudiu.Beznea@microchip.com; spf=None smtp.helo=postmaster@email.microchip.com; dmarc=pass (p=none dis=none) d=microchip.com IronPort-SDR: zwQCUugDMTH9sdoMpR7m7zB9VNrLpms1ozpiv3EL0MApfQT9YnuMEStcWWFUzyPinUGs/2YMPB Z8oBZPGxnryih7SfOPbwODcdbKL31DbcuVgmx+isAQ8NM9aJ4WLp/Xd2SkYqkcENqke9amAbFv q/c99n+vkVxZ87pH4MkOrOZrtTLBZCFSZndwbwWkxz3UV0eObs5jK2ICANy8znfzVxeSIkjGkI JZ2XNXSGTmISnNs+YTNEYaeGdL7m5ES40Y3aiaO+DnFSzMnnV3eqfz6GsD7KsVgRbnb9HJcAD2 4ek= X-IronPort-AV: E=Sophos;i="5.70,322,1574146800"; d="scan'208";a="60858104" Received: from smtpout.microchip.com (HELO email.microchip.com) ([198.175.253.82]) by esa6.microchip.iphmx.com with ESMTP/TLS/AES256-SHA256; 15 Jan 2020 04:00:25 -0700 Received: from chn-vm-ex01.mchp-main.com (10.10.85.143) by chn-vm-ex03.mchp-main.com (10.10.85.151) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.1.1713.5; Wed, 15 Jan 2020 04:00:24 -0700 Received: from m18063-ThinkPad-T460p.mchp-main.com (10.10.85.251) by chn-vm-ex01.mchp-main.com (10.10.85.143) with Microsoft SMTP Server id 15.1.1713.5 via Frontend Transport; Wed, 15 Jan 2020 04:00:18 -0700 From: Claudiu Beznea To: , , , , , , , , CC: , , , , , Sandeep Sheriker Mallikarjun , Claudiu Beznea , Tudor Ambarus , Codrin Ciubotariu Subject: [PATCH v4 5/5] ARM: dts: at91: sam9x60: add device tree for soc and board Date: Wed, 15 Jan 2020 12:59:47 +0200 Message-ID: <1579085987-13976-6-git-send-email-claudiu.beznea@microchip.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1579085987-13976-1-git-send-email-claudiu.beznea@microchip.com> References: <1579085987-13976-1-git-send-email-claudiu.beznea@microchip.com> MIME-Version: 1.0 Sender: linux-spi-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-spi@vger.kernel.org From: Sandeep Sheriker Mallikarjun Add device tree files for SAM9X60 SoC and SAM9X60-EK board. Signed-off-by: Sandeep Sheriker Mallikarjun Signed-off-by: Claudiu Beznea Signed-off-by: Tudor Ambarus Signed-off-by: Codrin Ciubotariu Acked-by: Nicolas Ferre --- arch/arm/boot/dts/Makefile | 2 + arch/arm/boot/dts/at91-sam9x60ek.dts | 647 ++++++++++++++++++++++++++++++++ arch/arm/boot/dts/sam9x60.dtsi | 691 +++++++++++++++++++++++++++++++++++ 3 files changed, 1340 insertions(+) create mode 100644 arch/arm/boot/dts/at91-sam9x60ek.dts create mode 100644 arch/arm/boot/dts/sam9x60.dtsi diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 4aef018ad22a..44073618794e 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -47,6 +47,8 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \ at91sam9g35ek.dtb \ at91sam9x25ek.dtb \ at91sam9x35ek.dtb +dtb-$(CONFIG_SOC_SAM9X60) += \ + at91-sam9x60ek.dtb dtb-$(CONFIG_SOC_SAM_V7) += \ at91-kizbox2-2.dtb \ at91-kizbox3-hs.dtb \ diff --git a/arch/arm/boot/dts/at91-sam9x60ek.dts b/arch/arm/boot/dts/at91-sam9x60ek.dts new file mode 100644 index 000000000000..9f30132d7d7b --- /dev/null +++ b/arch/arm/boot/dts/at91-sam9x60ek.dts @@ -0,0 +1,647 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * at91-sam9x60ek.dts - Device Tree file for Microchip SAM9X60-EK board + * + * Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries + * + * Author: Sandeep Sheriker M + */ +/dts-v1/; +#include "sam9x60.dtsi" + +/ { + model = "Microchip SAM9X60-EK"; + compatible = "microchip,sam9x60ek", "microchip,sam9x60", "atmel,at91sam9"; + + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + serial1 = &uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + clocks { + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <24000000>; + }; + }; + + regulators: regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + vdd_1v8: fixed-regulator-vdd_1v8@0 { + compatible = "regulator-fixed"; + regulator-name = "VDD_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + status = "okay"; + }; + + vdd_1v5: fixed-regulator-vdd_1v5@1 { + compatible = "regulator-fixed"; + regulator-name = "VDD_1V5"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + status = "okay"; + }; + + vdd1_3v3: fixed-regulator-vdd1_3v3@2 { + compatible = "regulator-fixed"; + regulator-name = "VDD1_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + status = "okay"; + }; + + vdd2_3v3: regulator-fixed-vdd2_3v3@3 { + compatible = "regulator-fixed"; + regulator-name = "VDD2_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + status = "okay"; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_key_gpio_default>; + status = "okay"; + + sw1 { + label = "SW1"; + gpios = <&pioD 18 GPIO_ACTIVE_LOW>; + linux,code=<0x104>; + wakeup-source; + }; + }; + + leds { + compatible = "gpio-leds"; + status = "okay"; /* Conflict with pwm0. */ + + red { + label = "red"; + gpios = <&pioB 11 GPIO_ACTIVE_HIGH>; + }; + + green { + label = "green"; + gpios = <&pioB 12 GPIO_ACTIVE_HIGH>; + }; + + blue { + label = "blue"; + gpios = <&pioB 13 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; +}; + +&adc { + vddana-supply = <&vdd1_3v3>; + vref-supply = <&vdd1_3v3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc_default &pinctrl_adtrg_default>; + status = "okay"; +}; + +&can0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can0_rx_tx>; + status = "disabled"; /* Conflict with dbgu. */ +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1_rx_tx>; + status = "okay"; +}; + +&classd { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_classd_default>; + atmel,pwm-type = "diff"; + atmel,non-overlap-time = <10>; + status = "okay"; +}; + +&dbgu { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dbgu>; + status = "okay"; /* Conflict with can0. */ +}; + +&ebi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ebi_addr_nand &pinctrl_ebi_data_0_7>; + status = "okay"; + + nand_controller: nand-controller { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nand_oe_we &pinctrl_nand_cs &pinctrl_nand_rb>; + status = "okay"; + + nand@3 { + reg = <0x3 0x0 0x800000>; + rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>; + cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>; + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + nand-ecc-strength = <8>; + nand-ecc-step-size = <512>; + nand-on-flash-bbt; + label = "atmel_nand"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x40000>; + }; + + uboot@40000 { + label = "u-boot"; + reg = <0x40000 0xc0000>; + }; + + ubootenvred@100000 { + label = "U-Boot Env Redundant"; + reg = <0x100000 0x40000>; + }; + + ubootenv@140000 { + label = "U-Boot Env"; + reg = <0x140000 0x40000>; + }; + + dtb@180000 { + label = "device tree"; + reg = <0x180000 0x80000>; + }; + + kernel@200000 { + label = "kernel"; + reg = <0x200000 0x600000>; + }; + + rootfs@800000 { + label = "rootfs"; + reg = <0x800000 0x1f800000>; + }; + }; + }; + }; +}; + +&flx0 { + atmel,flexcom-mode = ; + status = "okay"; + + i2c0: i2c@600 { + compatible = "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flx0_default>; + atmel,fifo-size = <16>; + i2c-analog-filter; + i2c-digital-filter; + i2c-digital-filter-width-ns = <35>; + status = "okay"; + + eeprom@53 { + compatible = "atmel,24c32"; + reg = <0x53>; + pagesize = <16>; + size = <128>; + status = "okay"; + }; + }; +}; + +&flx4 { + atmel,flexcom-mode = ; + status = "disabled"; + + spi0: spi@400 { + compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi"; + reg = <0x400 0x200>; + interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 13>; + clock-names = "spi_clk"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flx4_default>; + atmel,fifo-size = <16>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; +}; + +&flx5 { + atmel,flexcom-mode = ; + status = "okay"; + + uart1: serial@200 { + compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(10))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(11))>; + dma-names = "tx", "rx"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 14>; + clock-names = "usart"; + pinctrl-0 = <&pinctrl_flx5_default>; + pinctrl-names = "default"; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "okay"; + }; +}; + +&flx6 { + atmel,flexcom-mode = ; + status = "okay"; + + i2c1: i2c@600 { + compatible = "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <9 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 9>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flx6_default>; + atmel,fifo-size = <16>; + i2c-analog-filter; + i2c-digital-filter; + i2c-digital-filter-width-ns = <35>; + status = "okay"; + + gpio_exp: mcp23008@20 { + compatible = "microchip,mcp23008"; + reg = <0x20>; + }; + }; +}; + +&i2s { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2s_default>; + #sound-dai-cells = <0>; + status = "disabled"; /* Conflict with QSPI. */ +}; + +&macb0 { + phy-mode = "rmii"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_macb0_rmii>; + status = "okay"; + + ethernet-phy@0 { + reg = <0x0>; + }; +}; + +&pinctrl { + atmel,mux-mask = < + /* A B C */ + 0xFFFFFE7F 0xC0E0397F 0xEF00019D /* pioA */ + 0x03FFFFFF 0x02FC7E68 0x00780000 /* pioB */ + 0xffffffff 0xF83FFFFF 0xB800F3FC /* pioC */ + 0x003FFFFF 0x003F8000 0x00000000 /* pioD */ + >; + + adc { + pinctrl_adc_default: adc_default { + atmel,pins = ; + }; + + pinctrl_adtrg_default: adtrg_default { + atmel,pins = ; + }; + }; + + dbgu { + pinctrl_dbgu: dbgu-0 { + atmel,pins = ; + }; + }; + + i2s { + pinctrl_i2s_default: i2s { + atmel,pins = + ; /* I2SMCK */ + }; + }; + + qspi { + pinctrl_qspi: qspi { + atmel,pins = + ; + }; + }; + + nand { + pinctrl_nand_oe_we: nand-oe-we-0 { + atmel,pins = + ; + }; + + pinctrl_nand_rb: nand-rb-0 { + atmel,pins = + ; + }; + + pinctrl_nand_cs: nand-cs-0 { + atmel,pins = + ; + }; + }; + + ebi { + pinctrl_ebi_data_0_7: ebi-data-lsb-0 { + atmel,pins = + ; + }; + + pinctrl_ebi_data_0_15: ebi-data-msb-0 { + atmel,pins = + ; + }; + + pinctrl_ebi_addr_nand: ebi-addr-0 { + atmel,pins = + ; + }; + }; + + flexcom { + pinctrl_flx0_default: flx0_twi { + atmel,pins = + ; + }; + + pinctrl_flx4_default: flx4_spi { + atmel,pins = + ; + }; + + pinctrl_flx5_default: flx_uart { + atmel,pins = + ; + }; + + pinctrl_flx6_default: flx6_twi { + atmel,pins = + ; + }; + }; + + classd { + pinctrl_classd_default: classd { + atmel,pins = + ; + }; + }; + + can0 { + pinctrl_can0_rx_tx: can0_rx_tx { + atmel,pins = + ; /* Enable CAN Transceivers */ + }; + }; + + can1 { + pinctrl_can1_rx_tx: can1_rx_tx { + atmel,pins = + ; /* Enable CAN Transceivers */ + }; + }; + + macb0 { + pinctrl_macb0_rmii: macb0_rmii-0 { + atmel,pins = + ; /* PB10 periph A */ + }; + }; + + pwm0 { + pinctrl_pwm0_0: pwm0_0 { + atmel,pins = ; + }; + + pinctrl_pwm0_1: pwm0_1 { + atmel,pins = ; + }; + + pinctrl_pwm0_2: pwm0_2 { + atmel,pins = ; + }; + + pinctrl_pwm0_3: pwm0_3 { + atmel,pins = ; + }; + }; + + sdmmc0 { + pinctrl_sdmmc0_default: sdmmc0 { + atmel,pins = + ; /* PA20 DAT3 periph A with pullup */ + }; + }; + + gpio_keys { + pinctrl_key_gpio_default: pinctrl_key_gpio { + atmel,pins = ; + }; + }; +}; /* pinctrl */ + +&pmc { + atmel,osc-bypass; +}; + +&pwm0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_0 &pinctrl_pwm0_1 &pinctrl_pwm0_2 &pinctrl_pwm0_3>; + status = "disabled"; /* Conflict with leds. */ +}; + +&sdmmc0 { + bus-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdmmc0_default>; + status = "okay"; + cd-gpios = <&pioA 23 GPIO_ACTIVE_LOW>; + disable-wp; +}; + +&qspi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qspi>; + status = "okay"; /* Conflict with i2s. */ + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <80000000>; + m25p,fast-read; + + at91bootstrap@0 { + label = "qspi: at91bootstrap"; + reg = <0x0 0x40000>; + }; + + bootloader@40000 { + label = "qspi: bootloader"; + reg = <0x40000 0xc0000>; + }; + + bootloaderenvred@100000 { + label = "qspi: bootloader env redundant"; + reg = <0x100000 0x40000>; + }; + + bootloaderenv@140000 { + label = "qspi: bootloader env"; + reg = <0x140000 0x40000>; + }; + + dtb@180000 { + label = "qspi: device tree"; + reg = <0x180000 0x80000>; + }; + + kernel@200000 { + label = "qspi: kernel"; + reg = <0x200000 0x600000>; + }; + }; +}; + +&shutdown_controller { + atmel,shdwc-debouncer = <976>; + status = "okay"; + + input@0 { + reg = <0>; + }; +}; + +&tcb0 { + timer0: timer@0 { + compatible = "atmel,tcb-timer"; + reg = <0>; + }; + + timer1: timer@1 { + compatible = "atmel,tcb-timer"; + reg = <1>; + }; +}; + +&usb1 { + num-ports = <3>; + atmel,vbus-gpio = <0 + &pioD 15 GPIO_ACTIVE_HIGH + &pioD 16 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&usb2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sam9x60.dtsi b/arch/arm/boot/dts/sam9x60.dtsi new file mode 100644 index 000000000000..326b39328b58 --- /dev/null +++ b/arch/arm/boot/dts/sam9x60.dtsi @@ -0,0 +1,691 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * sam9x60.dtsi - Device Tree Include file for Microchip SAM9X60 SoC + * + * Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries + * + * Author: Sandeep Sheriker M + */ + +#include +#include +#include +#include +#include +#include + +/ { + #address-cells = <1>; + #size-cells = <1>; + model = "Microchip SAM9X60 SoC"; + compatible = "microchip,sam9x60"; + interrupt-parent = <&aic>; + + aliases { + serial0 = &dbgu; + gpio0 = &pioA; + gpio1 = &pioB; + gpio2 = &pioC; + gpio3 = &pioD; + tcb0 = &tcb0; + tcb1 = &tcb1; + }; + + cpus { + #address-cells = <0>; + #size-cells = <0>; + + cpu { + compatible = "arm,arm926ej-s"; + device_type = "cpu"; + }; + }; + + memory { + device_type = "memory"; + reg = <0x20000000 0x10000000>; + }; + + clocks { + slow_xtal: slow_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + + main_xtal: main_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + }; + + sram: sram@300000 { + compatible = "mmio-sram"; + reg = <0x00300000 0x100000>; + }; + + ahb { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + usb1: ohci@600000 { + compatible = "atmel,at91rm9200-ohci", "usb-ohci"; + reg = <0x00600000 0x100000>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_SYSTEM 6>; + clock-names = "ohci_clk", "hclk", "uhpck"; + status = "disabled"; + }; + + usb2: ehci@700000 { + compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; + reg = <0x00700000 0x100000>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; + clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 22>; + clock-names = "usb_clk", "ehci_clk"; + assigned-clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>; + assigned-clock-rates = <480000000>; + status = "disabled"; + }; + + ebi: ebi@10000000 { + compatible = "microchip,sam9x60-ebi"; + #address-cells = <2>; + #size-cells = <1>; + atmel,smc = <&smc>; + microchip,sfr = <&sfr>; + reg = <0x10000000 0x60000000>; + ranges = <0x0 0x0 0x10000000 0x10000000 + 0x1 0x0 0x20000000 0x10000000 + 0x2 0x0 0x30000000 0x10000000 + 0x3 0x0 0x40000000 0x10000000 + 0x4 0x0 0x50000000 0x10000000 + 0x5 0x0 0x60000000 0x10000000>; + clocks = <&pmc PMC_TYPE_CORE PMC_MCK>; + status = "disabled"; + + nand_controller: nand-controller { + compatible = "microchip,sam9x60-nand-controller"; + ecc-engine = <&pmecc>; + #address-cells = <2>; + #size-cells = <1>; + ranges; + status = "disabled"; + }; + }; + + sdmmc0: sdio-host@80000000 { + compatible = "microchip,sam9x60-sdhci"; + reg = <0x80000000 0x300>; + interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 12>, <&pmc PMC_TYPE_GCK 12>; + clock-names = "hclock", "multclk"; + assigned-clocks = <&pmc PMC_TYPE_GCK 12>; + assigned-clock-rates = <100000000>; + status = "disabled"; + }; + + sdmmc1: sdio-host@90000000 { + compatible = "microchip,sam9x60-sdhci"; + reg = <0x90000000 0x300>; + interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 26>, <&pmc PMC_TYPE_GCK 26>; + clock-names = "hclock", "multclk"; + assigned-clocks = <&pmc PMC_TYPE_GCK 26>; + assigned-clock-rates = <100000000>; + status = "disabled"; + }; + + apb { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + flx4: flexcom@f0000000 { + compatible = "atmel,sama5d2-flexcom"; + reg = <0xf0000000 0x200>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 13>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xf0000000 0x800>; + status = "disabled"; + }; + + flx5: flexcom@f0004000 { + compatible = "atmel,sama5d2-flexcom"; + reg = <0xf0004000 0x200>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 14>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xf0004000 0x800>; + status = "disabled"; + }; + + dma0: dma-controller@f0008000 { + compatible = "microchip,sam9x60-dma", "atmel,sama5d4-dma"; + reg = <0xf0008000 0x1000>; + interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>; + #dma-cells = <1>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 20>; + clock-names = "dma_clk"; + }; + + ssc: ssc@f0010000 { + compatible = "atmel,at91sam9g45-ssc"; + reg = <0xf0010000 0x4000>; + interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(38))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(39))>; + dma-names = "tx", "rx"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 28>; + clock-names = "pclk"; + status = "disabled"; + }; + + qspi: spi@f0014000 { + compatible = "microchip,sam9x60-qspi"; + reg = <0xf0014000 0x100>, <0x70000000 0x10000000>; + reg-names = "qspi_base", "qspi_mmap"; + interrupts = <35 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(26))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(27))>; + dma-names = "tx", "rx"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 35>, <&pmc PMC_TYPE_SYSTEM 19>; + clock-names = "pclk", "qspick"; + atmel,pmc = <&pmc>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2s: i2s@f001c000 { + compatible = "microchip,sam9x60-i2smcc"; + reg = <0xf001c000 0x100>; + interrupts = <34 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(36))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(37))>; + dma-names = "tx", "rx"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 34>, <&pmc PMC_TYPE_GCK 34>; + clock-names = "pclk", "gclk"; + status = "disabled"; + }; + + flx11: flexcom@f0020000 { + compatible = "atmel,sama5d2-flexcom"; + reg = <0xf0020000 0x200>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 32>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xf0020000 0x800>; + status = "disabled"; + }; + + flx12: flexcom@f0024000 { + compatible = "atmel,sama5d2-flexcom"; + reg = <0xf0024000 0x200>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 33>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xf0024000 0x800>; + status = "disabled"; + }; + + pit64b: timer@f0028000 { + compatible = "microchip,sam9x60-pit64b"; + reg = <0xf0028000 0x100>; + interrupts = <37 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 37>, <&pmc PMC_TYPE_GCK 37>; + clock-names = "pclk", "gclk"; + }; + + sha: sha@f002c000 { + compatible = "atmel,at91sam9g46-sha"; + reg = <0xf002c000 0x100>; + interrupts = <41 IRQ_TYPE_LEVEL_HIGH 0>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(34))>; + dma-names = "tx"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 41>; + clock-names = "sha_clk"; + status = "okay"; + }; + + trng: trng@f0030000 { + compatible = "microchip,sam9x60-trng"; + reg = <0xf0030000 0x100>; + interrupts = <38 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 38>; + status = "okay"; + }; + + aes: aes@f0034000 { + compatible = "atmel,at91sam9g46-aes"; + reg = <0xf0034000 0x100>; + interrupts = <39 IRQ_TYPE_LEVEL_HIGH 0>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(32))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(33))>; + dma-names = "tx", "rx"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 39>; + clock-names = "aes_clk"; + status = "okay"; + }; + + tdes: tdes@f0038000 { + compatible = "atmel,at91sam9g46-tdes"; + reg = <0xf0038000 0x100>; + interrupts = <40 IRQ_TYPE_LEVEL_HIGH 0>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(31))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(30))>; + dma-names = "tx", "rx"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 40>; + clock-names = "tdes_clk"; + status = "okay"; + }; + + classd: classd@f003c000 { + compatible = "atmel,sama5d2-classd"; + reg = <0xf003c000 0x100>; + interrupts = <42 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(35))>; + dma-names = "tx"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 42>, <&pmc PMC_TYPE_GCK 42>; + clock-names = "pclk", "gclk"; + status = "disabled"; + }; + + can0: can@f8000000 { + compatible = "microchip,sam9x60-can", "atmel,at91sam9x5-can"; + reg = <0xf8000000 0x300>; + interrupts = <29 IRQ_TYPE_LEVEL_HIGH 3>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 29>; + clock-names = "can_clk"; + status = "disabled"; + }; + + can1: can@f8004000 { + compatible = "microchip,sam9x60-can", "atmel,at91sam9x5-can"; + reg = <0xf8004000 0x300>; + interrupts = <30 IRQ_TYPE_LEVEL_HIGH 3>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 30>; + clock-names = "can_clk"; + status = "disabled"; + }; + + tcb0: timer@f8008000 { + compatible = "microchip,sam9x60-tcb", "atmel,at91sam9x5-tcb", "simple-mfd", "syscon"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xf8008000 0x100>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&clk32k 0>; + clock-names = "t0_clk", "slow_clk"; + }; + + tcb1: timer@f800c000 { + compatible = "microchip,sam9x60-tcb", "atmel,at91sam9x5-tcb", "simple-mfd", "syscon"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xf800c000 0x100>; + interrupts = <45 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 45>, <&clk32k 0>; + clock-names = "t0_clk", "slow_clk"; + }; + + flx6: flexcom@f8010000 { + compatible = "atmel,sama5d2-flexcom"; + reg = <0xf8010000 0x200>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 9>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xf8010000 0x800>; + status = "disabled"; + }; + + flx7: flexcom@f8014000 { + compatible = "atmel,sama5d2-flexcom"; + reg = <0xf8014000 0x200>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 10>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xf8014000 0x800>; + status = "disabled"; + }; + + flx8: flexcom@f8018000 { + compatible = "atmel,sama5d2-flexcom"; + reg = <0xf8018000 0x200>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 11>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xf8018000 0x800>; + status = "disabled"; + }; + + flx0: flexcom@f801c000 { + compatible = "atmel,sama5d2-flexcom"; + reg = <0xf801c000 0x200>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 5>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xf801c000 0x800>; + status = "disabled"; + }; + + flx1: flexcom@f8020000 { + compatible = "atmel,sama5d2-flexcom"; + reg = <0xf8020000 0x200>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 6>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xf8020000 0x800>; + status = "disabled"; + }; + + flx2: flexcom@f8024000 { + compatible = "atmel,sama5d2-flexcom"; + reg = <0xf8024000 0x200>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 7>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xf8024000 0x800>; + status = "disabled"; + }; + + flx3: flexcom@f8028000 { + compatible = "atmel,sama5d2-flexcom"; + reg = <0xf8028000 0x200>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 8>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xf8028000 0x800>; + status = "disabled"; + }; + + macb0: ethernet@f802c000 { + compatible = "cdns,sam9x60-macb", "cdns,macb"; + reg = <0xf802c000 0x1000>; + interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 24>, <&pmc PMC_TYPE_PERIPHERAL 24>; + clock-names = "hclk", "pclk"; + status = "disabled"; + }; + + macb1: ethernet@f8030000 { + compatible = "cdns,sam9x60-macb", "cdns,macb"; + reg = <0xf8030000 0x1000>; + interrupts = <27 IRQ_TYPE_LEVEL_HIGH 3>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 27>, <&pmc PMC_TYPE_PERIPHERAL 27>; + clock-names = "hclk", "pclk"; + status = "disabled"; + }; + + pwm0: pwm@f8034000 { + compatible = "microchip,sam9x60-pwm"; + reg = <0xf8034000 0x300>; + interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 18>; + #pwm-cells = <3>; + status="disabled"; + }; + + hlcdc: hlcdc@f8038000 { + compatible = "microchip,sam9x60-hlcdc"; + reg = <0xf8038000 0x4000>; + interrupts = <25 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 25>, <&pmc PMC_TYPE_GCK 25>, <&clk32k 1>; + clock-names = "periph_clk","sys_clk", "slow_clk"; + assigned-clocks = <&pmc PMC_TYPE_GCK 25>; + assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_MCK>; + status = "disabled"; + + hlcdc-display-controller { + compatible = "atmel,hlcdc-display-controller"; + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + }; + + hlcdc_pwm: hlcdc-pwm { + compatible = "atmel,hlcdc-pwm"; + #pwm-cells = <3>; + }; + }; + + flx9: flexcom@f8040000 { + compatible = "atmel,sama5d2-flexcom"; + reg = <0xf8040000 0x200>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 15>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xf8040000 0x800>; + status = "disabled"; + }; + + flx10: flexcom@f8044000 { + compatible = "atmel,sama5d2-flexcom"; + reg = <0xf8044000 0x200>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 16>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xf8044000 0x800>; + status = "disabled"; + }; + + isi: isi@f8048000 { + compatible = "microchip,sam9x60-isi", "atmel,at91sam9g45-isi"; + reg = <0xf8048000 0x100>; + interrupts = <43 IRQ_TYPE_LEVEL_HIGH 5>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 43>; + clock-names = "isi_clk"; + status = "disabled"; + port { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + adc: adc@f804c000 { + compatible = "microchip,sam9x60-adc", "atmel,sama5d2-adc"; + reg = <0xf804c000 0x100>; + interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 19>; + clock-names = "adc_clk"; + dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(40))>; + dma-names = "rx"; + atmel,min-sample-rate-hz = <200000>; + atmel,max-sample-rate-hz = <20000000>; + atmel,startup-time-ms = <4>; + atmel,trigger-edge-type = ; + #io-channel-cells = <1>; + status = "disabled"; + }; + + sfr: sfr@f8050000 { + compatible = "microchip,sam9x60-sfr", "syscon"; + reg = <0xf8050000 0x100>; + }; + + matrix: matrix@ffffde00 { + compatible = "microchip,sam9x60-matrix", "atmel,at91sam9x5-matrix", "syscon"; + reg = <0xffffde00 0x200>; + }; + + pmecc: ecc-engine@ffffe000 { + compatible = "microchip,sam9x60-pmecc", "atmel,at91sam9g45-pmecc"; + reg = <0xffffe000 0x300>, + <0xffffe600 0x100>; + }; + + mpddrc: mpddrc@ffffe800 { + compatible = "microchip,sam9x60-ddramc", "atmel,sama5d3-ddramc"; + reg = <0xffffe800 0x200>; + clocks = <&pmc PMC_TYPE_SYSTEM 2>, <&pmc PMC_TYPE_CORE PMC_MCK>; + clock-names = "ddrck", "mpddr"; + }; + + smc: smc@ffffea00 { + compatible = "microchip,sam9x60-smc", "atmel,at91sam9260-smc", "syscon"; + reg = <0xffffea00 0x100>; + }; + + aic: interrupt-controller@fffff100 { + compatible = "microchip,sam9x60-aic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0xfffff100 0x100>; + atmel,external-irqs = <31>; + }; + + dbgu: serial@fffff200 { + compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; + reg = <0xfffff200 0x200>; + interrupts = <47 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(28))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(29))>; + dma-names = "tx", "rx"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 47>; + clock-names = "usart"; + status = "disabled"; + }; + + pinctrl: pinctrl@fffff400 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "microchip,sam9x60-pinctrl", "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus"; + ranges = <0xfffff400 0xfffff400 0x800>; + + pioA: gpio@fffff400 { + compatible = "microchip,sam9x60-gpio", "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff400 0x200>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 2>; + }; + + pioB: gpio@fffff600 { + compatible = "microchip,sam9x60-gpio", "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff600 0x200>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + #gpio-lines = <26>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 3>; + }; + + pioC: gpio@fffff800 { + compatible = "microchip,sam9x60-gpio", "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff800 0x200>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 4>; + }; + + pioD: gpio@fffffa00 { + compatible = "microchip,sam9x60-gpio", "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffffa00 0x200>; + interrupts = <44 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + #gpio-lines = <22>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 44>; + }; + }; + + pmc: pmc@fffffc00 { + compatible = "microchip,sam9x60-pmc", "syscon"; + reg = <0xfffffc00 0x200>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + #clock-cells = <2>; + clocks = <&clk32k 1>, <&clk32k 0>, <&main_xtal>; + clock-names = "td_slck", "md_slck", "main_xtal"; + }; + + reset_controller: rstc@fffffe00 { + compatible = "microchip,sam9x60-rstc"; + reg = <0xfffffe00 0x10>; + clocks = <&clk32k 0>; + }; + + shutdown_controller: shdwc@fffffe10 { + compatible = "microchip,sam9x60-shdwc"; + reg = <0xfffffe10 0x10>; + clocks = <&clk32k 0>; + #address-cells = <1>; + #size-cells = <0>; + atmel,wakeup-rtc-timer; + atmel,wakeup-rtt-timer; + status = "disabled"; + }; + + pit: timer@fffffe40 { + compatible = "atmel,at91sam9260-pit"; + reg = <0xfffffe40 0x10>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_CORE PMC_MCK>; + }; + + clk32k: sckc@fffffe50 { + compatible = "microchip,sam9x60-sckc"; + reg = <0xfffffe50 0x4>; + clocks = <&slow_xtal>; + #clock-cells = <1>; + }; + + gpbr: syscon@fffffe60 { + compatible = "microchip,sam9x60-gpbr", "atmel,at91sam9260-gpbr", "syscon"; + reg = <0xfffffe60 0x10>; + }; + + rtc: rtc@fffffea8 { + compatible = "microchip,sam9x60-rtc", "atmel,at91sam9x5-rtc"; + reg = <0xfffffea8 0x100>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&clk32k 0>; + }; + }; + }; +};