From patchwork Tue Mar 24 15:44:08 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Jishnu Prakash X-Patchwork-Id: 11455893 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id EAF0E6CA for ; Tue, 24 Mar 2020 15:45:41 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id AEF6820775 for ; Tue, 24 Mar 2020 15:45:41 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=fail reason="signature verification failed" (1024-bit key) header.d=mg.codeaurora.org header.i=@mg.codeaurora.org header.b="CRrthv1R" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1727702AbgCXPpl (ORCPT ); Tue, 24 Mar 2020 11:45:41 -0400 Received: from mail27.static.mailgun.info ([104.130.122.27]:45101 "EHLO mail27.static.mailgun.info" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1728301AbgCXPpk (ORCPT ); Tue, 24 Mar 2020 11:45:40 -0400 DKIM-Signature: a=rsa-sha256; v=1; c=relaxed/relaxed; d=mg.codeaurora.org; q=dns/txt; s=smtp; t=1585064740; h=References: In-Reply-To: Message-Id: Date: Subject: Cc: To: From: Sender; bh=IrkciGFCAIGY4X0BKMBEidNgzh9AZKRe2tWhQgipA8A=; b=CRrthv1RfN/gtMZjidwaQCswTmQek2SwYpu4KfMdTYSBXi/N3tSjG9RBIxTiTuSfokHZz7J/ R1TsMYmrRIX101TdlIo+6zuvSFBvAQ6NJBWdAw/Xs6LnddkKO/Iw6t/5ZN79+izcBAdgCogg 4RIc/L10w5NHmIUbKZpFh8pKDrA= X-Mailgun-Sending-Ip: 104.130.122.27 X-Mailgun-Sid: WyI3Mzk1NyIsICJsaW51eC1paW9Admdlci5rZXJuZWwub3JnIiwgImJlOWU0YSJd Received: from smtp.codeaurora.org (ec2-35-166-182-171.us-west-2.compute.amazonaws.com [35.166.182.171]) by mxa.mailgun.org with ESMTP id 5e7a2b23.7fcbcfe5b3b0-smtp-out-n04; Tue, 24 Mar 2020 15:45:39 -0000 (UTC) Received: by smtp.codeaurora.org (Postfix, from userid 1001) id 0216CC44793; Tue, 24 Mar 2020 15:45:37 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-caf-mail-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-1.0 required=2.0 tests=ALL_TRUSTED,SPF_NONE, URIBL_BLOCKED autolearn=unavailable autolearn_force=no version=3.4.0 Received: from jprakash-linux.qualcomm.com (blr-c-bdr-fw-01_GlobalNAT_AllZones-Outside.qualcomm.com [103.229.19.19]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-SHA256 (128/128 bits)) (No client certificate requested) (Authenticated sender: jprakash) by smtp.codeaurora.org (Postfix) with ESMTPSA id 9AA1FC433CB; Tue, 24 Mar 2020 15:45:27 +0000 (UTC) DMARC-Filter: OpenDMARC Filter v1.3.2 smtp.codeaurora.org 9AA1FC433CB Authentication-Results: aws-us-west-2-caf-mail-1.web.codeaurora.org; dmarc=none (p=none dis=none) header.from=codeaurora.org Authentication-Results: aws-us-west-2-caf-mail-1.web.codeaurora.org; spf=none smtp.mailfrom=jprakash@codeaurora.org From: Jishnu Prakash To: agross@kernel.org, bjorn.andersson@linaro.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, mka@chromium.org, linus.walleij@linaro.org, sboyd@codeaurora.org, Jonathan.Cameron@huawei.com, smohanad@codeaurora.org, kgunda@codeaurora.org, aghayal@codeaurora.org, Jonathan Cameron , Hartmut Knaack , Lars-Peter Clausen , Peter Meerwald-Stadler , Rob Herring , Mark Rutland , Jishnu Prakash , Amit Kucheria , Andy Gross , linux-iio@vger.kernel.org Cc: linux-arm-msm@vger.kernel.org, linux-arm-msm-owner@vger.kernel.org Subject: [PATCH 1/3] iio: adc: Convert the QCOM SPMI ADC bindings to .yaml format Date: Tue, 24 Mar 2020 21:14:08 +0530 Message-Id: <1585064650-16235-2-git-send-email-jprakash@codeaurora.org> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1585064650-16235-1-git-send-email-jprakash@codeaurora.org> References: <1585064650-16235-1-git-send-email-jprakash@codeaurora.org> Sender: linux-iio-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-iio@vger.kernel.org Convert the adc bindings from .txt to .yaml format. Signed-off-by: Jishnu Prakash --- .../devicetree/bindings/iio/adc/qcom,spmi-vadc.txt | 173 -------------------- .../bindings/iio/adc/qcom,spmi-vadc.yaml | 178 +++++++++++++++++++++ 2 files changed, 178 insertions(+), 173 deletions(-) delete mode 100644 Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt create mode 100644 Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt deleted file mode 100644 index c878768..0000000 --- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt +++ /dev/null @@ -1,173 +0,0 @@ -Qualcomm's SPMI PMIC ADC - -- SPMI PMIC voltage ADC (VADC) provides interface to clients to read - voltage. The VADC is a 15-bit sigma-delta ADC. -- SPMI PMIC5 voltage ADC (ADC) provides interface to clients to read - voltage. The VADC is a 16-bit sigma-delta ADC. - -VADC node: - -- compatible: - Usage: required - Value type: - Definition: Should contain "qcom,spmi-vadc". - Should contain "qcom,spmi-adc5" for PMIC5 ADC driver. - Should contain "qcom,spmi-adc-rev2" for PMIC rev2 ADC driver. - Should contain "qcom,pms405-adc" for PMS405 PMIC - -- reg: - Usage: required - Value type: - Definition: VADC base address in the SPMI PMIC register map. - -- #address-cells: - Usage: required - Value type: - Definition: Must be one. Child node 'reg' property should define ADC - channel number. - -- #size-cells: - Usage: required - Value type: - Definition: Must be zero. - -- #io-channel-cells: - Usage: required - Value type: - Definition: Must be one. For details about IIO bindings see: - Documentation/devicetree/bindings/iio/iio-bindings.txt - -- interrupts: - Usage: optional - Value type: - Definition: End of conversion interrupt. - -Channel node properties: - -- reg: - Usage: required - Value type: - Definition: ADC channel number. - See include/dt-bindings/iio/qcom,spmi-vadc.h - -- label: - Usage: required for "qcom,spmi-adc5" and "qcom,spmi-adc-rev2" - Value type: - Definition: ADC input of the platform as seen in the schematics. - For thermistor inputs connected to generic AMUX or GPIO inputs - these can vary across platform for the same pins. Hence select - the platform schematics name for this channel. - -- qcom,decimation: - Usage: optional - Value type: - Definition: This parameter is used to decrease ADC sampling rate. - Quicker measurements can be made by reducing decimation ratio. - - For compatible property "qcom,spmi-vadc", valid values are - 512, 1024, 2048, 4096. If property is not found, default value - of 512 will be used. - - For compatible property "qcom,spmi-adc5", valid values are 250, 420 - and 840. If property is not found, default value of 840 is used. - - For compatible property "qcom,spmi-adc-rev2", valid values are 256, - 512 and 1024. If property is not present, default value is 1024. - -- qcom,pre-scaling: - Usage: optional - Value type: - Definition: Used for scaling the channel input signal before the signal is - fed to VADC. The configuration for this node is to know the - pre-determined ratio and use it for post scaling. Select one from - the following options. - <1 1>, <1 3>, <1 4>, <1 6>, <1 20>, <1 8>, <10 81>, <1 10> - If property is not found default value depending on chip will be used. - -- qcom,ratiometric: - Usage: optional - Value type: - Definition: Channel calibration type. - - For compatible property "qcom,spmi-vadc", if this property is - specified VADC will use the VDD reference (1.8V) and GND for - channel calibration. If property is not found, channel will be - calibrated with 0.625V and 1.25V reference channels, also - known as absolute calibration. - - For compatible property "qcom,spmi-adc5" and "qcom,spmi-adc-rev2", - if this property is specified VADC will use the VDD reference - (1.875V) and GND for channel calibration. If property is not found, - channel will be calibrated with 0V and 1.25V reference channels, - also known as absolute calibration. - -- qcom,hw-settle-time: - Usage: optional - Value type: - Definition: Time between AMUX getting configured and the ADC starting - conversion. The 'hw_settle_time' is an index used from valid values - and programmed in hardware to achieve the hardware settling delay. - - For compatible property "qcom,spmi-vadc" and "qcom,spmi-adc-rev2", - Delay = 100us * (hw_settle_time) for hw_settle_time < 11, - and 2ms * (hw_settle_time - 10) otherwise. - Valid values are: 0, 100, 200, 300, 400, 500, 600, 700, 800, - 900 us and 1, 2, 4, 6, 8, 10 ms. - If property is not found, channel will use 0us. - - For compatible property "qcom,spmi-adc5", delay = 15us for - value 0, 100us * (value) for values < 11, - and 2ms * (value - 10) otherwise. - Valid values are: 15, 100, 200, 300, 400, 500, 600, 700, 800, - 900 us and 1, 2, 4, 6, 8, 10 ms - Certain controller digital versions have valid values of - 15, 100, 200, 300, 400, 500, 600, 700, 1, 2, 4, 8, 16, 32, 64, 128 ms - If property is not found, channel will use 15us. - -- qcom,avg-samples: - Usage: optional - Value type: - Definition: Number of samples to be used for measurement. - Averaging provides the option to obtain a single measurement - from the ADC that is an average of multiple samples. The value - selected is 2^(value). - - For compatible property "qcom,spmi-vadc", valid values - are: 1, 2, 4, 8, 16, 32, 64, 128, 256, 512 - If property is not found, 1 sample will be used. - - For compatible property "qcom,spmi-adc5" and "qcom,spmi-adc-rev2", - valid values are: 1, 2, 4, 8, 16 - If property is not found, 1 sample will be used. - -NOTE: - -For compatible property "qcom,spmi-vadc" following channels, also known as -reference point channels, are used for result calibration and their channel -configuration nodes should be defined: -VADC_REF_625MV and/or VADC_SPARE1(based on PMIC version) VADC_REF_1250MV, -VADC_GND_REF and VADC_VDD_VADC. - -Example: - -#include -#include -/* ... */ - - /* VADC node */ - pmic_vadc: vadc@3100 { - compatible = "qcom,spmi-vadc"; - reg = <0x3100>; - interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; - #address-cells = <1>; - #size-cells = <0>; - #io-channel-cells = <1>; - io-channel-ranges; - - /* Channel node */ - adc-chan@VADC_LR_MUX10_USB_ID { - reg = ; - qcom,decimation = <512>; - qcom,ratiometric; - qcom,hw-settle-time = <200>; - qcom,avg-samples = <1>; - qcom,pre-scaling = <1 3>; - }; - }; - - /* IIO client node */ - usb { - io-channels = <&pmic_vadc VADC_LR_MUX10_USB_ID>; - io-channel-names = "vadc"; - }; diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml new file mode 100644 index 0000000..72db14c --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml @@ -0,0 +1,178 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/qcom,spmi-vadc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm's SPMI PMIC ADC + +maintainers: + - Andy Gross + - Bjorn Andersson + +description: | + SPMI PMIC voltage ADC (VADC) provides interface to clients to read + voltage. The VADC is a 15-bit sigma-delta ADC. + SPMI PMIC5 voltage ADC (ADC) provides interface to clients to read + voltage. The VADC is a 16-bit sigma-delta ADC. + +properties: + compatible: + enum: + - qcom,spmi-vadc + - qcom,spmi-adc5 + - qcom,spmi-adc-rev2 + - qcom,pms405-adc + + reg: + description: VADC base address in the SPMI PMIC register map + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + '#io-channel-cells': + const: 1 + + interrupts: + maxItems: 1 + description: + End of conversion interrupt. + +required: + - compatible + - reg + - '#address-cells' + - '#size-cells' + - '#io-channel-cells' + +patternProperties: + "^[a-z0-9-_@]$": + type: object + description: | + Represents the external channels which are connected to the ADC. + For compatible property "qcom,spmi-vadc" following channels, also known as + reference point channels, are used for result calibration and their channel + configuration nodes should be defined: + VADC_REF_625MV and/or VADC_SPARE1(based on PMIC version) VADC_REF_1250MV, + VADC_GND_REF and VADC_VDD_VADC. + + properties: + reg: + description: | + ADC channel number. + See include/dt-bindings/iio/qcom,spmi-vadc.h + + label: + description: | + ADC input of the platform as seen in the schematics. + For thermistor inputs connected to generic AMUX or GPIO inputs + these can vary across platform for the same pins. Hence select + the platform schematics name for this channel. It is required + for "qcom,spmi-adc5" and "qcom,spmi-adc-rev2". + allOf: + - $ref: /schemas/types.yaml#/definitions/string + + qcom,decimation: + description: | + This parameter is used to decrease ADC sampling rate. + Quicker measurements can be made by reducing decimation ratio. + - For compatible property "qcom,spmi-vadc", valid values are + 512, 1024, 2048, 4096. If property is not found, default value + of 512 will be used. + - For compatible property "qcom,spmi-adc5", valid values are 250, 420 + and 840. If property is not found, default value of 840 is used. + - For compatible property "qcom,spmi-adc-rev2", valid values are 256, + 512 and 1024. If property is not present, default value is 1024. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + + qcom,pre-scaling: + description: | + Used for scaling the channel input signal before the signal is + fed to VADC. The configuration for this node is to know the + pre-determined ratio and use it for post scaling. Select one from + the following options. + <1 1>, <1 3>, <1 4>, <1 6>, <1 20>, <1 8>, <10 81>, <1 10> + If property is not found default value depending on chip will be used. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + + qcom,ratiometric: + description: | + Channel calibration type. + - For compatible property "qcom,spmi-vadc", if this property is + specified VADC will use the VDD reference (1.8V) and GND for + channel calibration. If property is not found, channel will be + calibrated with 0.625V and 1.25V reference channels, also + known as absolute calibration. + - For compatible property "qcom,spmi-adc5" and "qcom,spmi-adc-rev2", + if this property is specified VADC will use the VDD reference (1.875V) + and GND for channel calibration. If property is not found, channel + will be calibrated with 0V and 1.25V reference channels, also known + as absolute calibration. + type: boolean + + qcom,hw-settle-time: + description: | + Time between AMUX getting configured and the ADC starting + conversion. The 'hw_settle_time' is an index used from valid values + and programmed in hardware to achieve the hardware settling delay. + - For compatible property "qcom,spmi-vadc" and "qcom,spmi-adc-rev2", + Delay = 100us * (hw_settle_time) for hw_settle_time < 11, + and 2ms * (hw_settle_time - 10) otherwise. + Valid values are: 0, 100, 200, 300, 400, 500, 600, 700, 800, + 900 us and 1, 2, 4, 6, 8, 10 ms. + If property is not found, channel will use 0us. + - For compatible property "qcom,spmi-adc5", delay = 15us for + value 0, 100us * (value) for values < 11, + and 2ms * (value - 10) otherwise. + Valid values are: 15, 100, 200, 300, 400, 500, 600, 700, 800, + 900 us and 1, 2, 4, 6, 8, 10 ms + Certain controller digital versions have valid values of + 15, 100, 200, 300, 400, 500, 600, 700, 1, 2, 4, 8, 16, 32, 64, 128 ms + If property is not found, channel will use 15us. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + + qcom,avg-samples: + description: | + Number of samples to be used for measurement. + Averaging provides the option to obtain a single measurement + from the ADC that is an average of multiple samples. The value + selected is 2^(value). + - For compatible property "qcom,spmi-vadc", valid values + are: 1, 2, 4, 8, 16, 32, 64, 128, 256, 512 + If property is not found, 1 sample will be used. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + + required: + - reg + - diff-channels + +examples: + - | + /* VADC node */ + pmic_vadc: vadc@3100 { + compatible = "qcom,spmi-vadc"; + reg = <0x3100>; + interrupts = <0x0 0x31 0x0 0x1>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + io-channel-ranges; + + /* Channel node */ + adc-chan@0x39 { + reg = <0x39>; + qcom,decimation = <512>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,avg-samples = <1>; + qcom,pre-scaling = <1 3>; + }; + }; From patchwork Tue Mar 24 15:44:09 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Jishnu Prakash X-Patchwork-Id: 11455899 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 3386417D4 for ; Tue, 24 Mar 2020 15:45:53 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 0C49520789 for ; Tue, 24 Mar 2020 15:45:53 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=fail reason="signature verification failed" (1024-bit key) header.d=mg.codeaurora.org header.i=@mg.codeaurora.org header.b="foSP3AZS" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1728417AbgCXPpw (ORCPT ); Tue, 24 Mar 2020 11:45:52 -0400 Received: from mail27.static.mailgun.info ([104.130.122.27]:17763 "EHLO mail27.static.mailgun.info" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1728520AbgCXPpw (ORCPT ); Tue, 24 Mar 2020 11:45:52 -0400 DKIM-Signature: a=rsa-sha256; v=1; c=relaxed/relaxed; d=mg.codeaurora.org; q=dns/txt; s=smtp; t=1585064751; h=References: In-Reply-To: Message-Id: Date: Subject: Cc: To: From: Sender; bh=aFxrEvb5FZ3Oz2BxK2Zd6fZmP3lxuVKKy35InfgXQ9U=; b=foSP3AZS8Zd2Q2W2os3YSWdx3kZs8c4oPyu8hG35dQAe+/NpUOO4BwcZBENqezdhzZHRMfDe 8Wq/lIVuRnHVbNGomznltUJLApmEaCoHke2XjBBvE8sPcmg4/RlkgMrpG03OC2fZ3OOIKclb 5nrH+eRdG2/Nmr+VRA8TQEtXIQE= X-Mailgun-Sending-Ip: 104.130.122.27 X-Mailgun-Sid: WyI3Mzk1NyIsICJsaW51eC1paW9Admdlci5rZXJuZWwub3JnIiwgImJlOWU0YSJd Received: from smtp.codeaurora.org (ec2-35-166-182-171.us-west-2.compute.amazonaws.com [35.166.182.171]) by mxa.mailgun.org with ESMTP id 5e7a2b2e.7fd79e01c1f0-smtp-out-n03; Tue, 24 Mar 2020 15:45:50 -0000 (UTC) Received: by smtp.codeaurora.org (Postfix, from userid 1001) id 3A248C44793; Tue, 24 Mar 2020 15:45:48 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-caf-mail-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-1.0 required=2.0 tests=ALL_TRUSTED,SPF_NONE, URIBL_BLOCKED autolearn=unavailable autolearn_force=no version=3.4.0 Received: from jprakash-linux.qualcomm.com (blr-c-bdr-fw-01_GlobalNAT_AllZones-Outside.qualcomm.com [103.229.19.19]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-SHA256 (128/128 bits)) (No client certificate requested) (Authenticated sender: jprakash) by smtp.codeaurora.org (Postfix) with ESMTPSA id 0A458C433CB; Tue, 24 Mar 2020 15:45:40 +0000 (UTC) DMARC-Filter: OpenDMARC Filter v1.3.2 smtp.codeaurora.org 0A458C433CB Authentication-Results: aws-us-west-2-caf-mail-1.web.codeaurora.org; dmarc=none (p=none dis=none) header.from=codeaurora.org Authentication-Results: aws-us-west-2-caf-mail-1.web.codeaurora.org; spf=none smtp.mailfrom=jprakash@codeaurora.org From: Jishnu Prakash To: agross@kernel.org, bjorn.andersson@linaro.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, mka@chromium.org, linus.walleij@linaro.org, sboyd@codeaurora.org, Jonathan.Cameron@huawei.com, smohanad@codeaurora.org, kgunda@codeaurora.org, aghayal@codeaurora.org, Jonathan Cameron , Hartmut Knaack , Lars-Peter Clausen , Peter Meerwald-Stadler , Rob Herring , Mark Rutland , Jishnu Prakash , linux-iio@vger.kernel.org Cc: linux-arm-msm@vger.kernel.org, linux-arm-msm-owner@vger.kernel.org Subject: [PATCH 2/3] iio: adc: Add PMIC7 ADC bindings Date: Tue, 24 Mar 2020 21:14:09 +0530 Message-Id: <1585064650-16235-3-git-send-email-jprakash@codeaurora.org> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1585064650-16235-1-git-send-email-jprakash@codeaurora.org> References: <1585064650-16235-1-git-send-email-jprakash@codeaurora.org> Sender: linux-iio-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-iio@vger.kernel.org Add documentation for PMIC7 ADC peripheral. For PMIC7 ADC, all SW communication to ADC goes through PMK8350, which communicates with other PMICs through PBS. Signed-off-by: Jishnu Prakash --- .../bindings/iio/adc/qcom,spmi-vadc.yaml | 28 ++++++++++++++++------ 1 file changed, 21 insertions(+), 7 deletions(-) diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml index 72db14c..20f010c 100644 --- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml @@ -13,7 +13,7 @@ maintainers: description: | SPMI PMIC voltage ADC (VADC) provides interface to clients to read voltage. The VADC is a 15-bit sigma-delta ADC. - SPMI PMIC5 voltage ADC (ADC) provides interface to clients to read + SPMI PMIC5/PMIC7 voltage ADC (ADC) provides interface to clients to read voltage. The VADC is a 16-bit sigma-delta ADC. properties: @@ -23,6 +23,7 @@ properties: - qcom,spmi-adc5 - qcom,spmi-adc-rev2 - qcom,pms405-adc + - qcom,spmi-adc7 reg: description: VADC base address in the SPMI PMIC register map @@ -65,6 +66,8 @@ patternProperties: description: | ADC channel number. See include/dt-bindings/iio/qcom,spmi-vadc.h + For PMIC7 ADC, the channel numbers are specified separately per PMIC + in the PMIC-specific files in include/dt-bindings/iio/. label: description: | @@ -72,7 +75,7 @@ patternProperties: For thermistor inputs connected to generic AMUX or GPIO inputs these can vary across platform for the same pins. Hence select the platform schematics name for this channel. It is required - for "qcom,spmi-adc5" and "qcom,spmi-adc-rev2". + for "qcom,spmi-adc5", "qcom,spmi-adc7" and "qcom,spmi-adc-rev2". allOf: - $ref: /schemas/types.yaml#/definitions/string @@ -85,6 +88,8 @@ patternProperties: of 512 will be used. - For compatible property "qcom,spmi-adc5", valid values are 250, 420 and 840. If property is not found, default value of 840 is used. + - For compatible property "qcom,spmi-adc7", valid values are 85, 340 + and 1360. If property is not found, default value of 1360 is used. - For compatible property "qcom,spmi-adc-rev2", valid values are 256, 512 and 1024. If property is not present, default value is 1024. allOf: @@ -109,11 +114,11 @@ patternProperties: channel calibration. If property is not found, channel will be calibrated with 0.625V and 1.25V reference channels, also known as absolute calibration. - - For compatible property "qcom,spmi-adc5" and "qcom,spmi-adc-rev2", - if this property is specified VADC will use the VDD reference (1.875V) - and GND for channel calibration. If property is not found, channel - will be calibrated with 0V and 1.25V reference channels, also known - as absolute calibration. + - For compatible property "qcom,spmi-adc5", "qcom,spmi-adc7" and + "qcom,spmi-adc-rev2", if this property is specified VADC will use + the VDD reference (1.875V) and GND for channel calibration. If + property is not found, channel will be calibrated with 0V and 1.25V + reference channels, also known as absolute calibration. type: boolean qcom,hw-settle-time: @@ -135,6 +140,12 @@ patternProperties: Certain controller digital versions have valid values of 15, 100, 200, 300, 400, 500, 600, 700, 1, 2, 4, 8, 16, 32, 64, 128 ms If property is not found, channel will use 15us. + - For compatible property "qcom,spmi-adc7", delay = 15us for + value 0, 100us * (value) for values < 8, 1ms for value 8 + and 2ms * (value - 8) otherwise. + Valid values are: 15, 100, 200, 300, 400, 500, 600, 700, 1000, 2000, + 4000, 8000, 16000, 32000, 64000, 128000 us. + If property is not found, channel will use 15us. allOf: - $ref: /schemas/types.yaml#/definitions/uint32 @@ -147,6 +158,9 @@ patternProperties: - For compatible property "qcom,spmi-vadc", valid values are: 1, 2, 4, 8, 16, 32, 64, 128, 256, 512 If property is not found, 1 sample will be used. + - For compatible property "qcom,spmi-adc5", "qcom,spmi-adc7" + and "qcom,spmi-adc-rev2", valid values are: 1, 2, 4, 8, 16. + If property is not found, 1 sample will be used. allOf: - $ref: /schemas/types.yaml#/definitions/uint32 From patchwork Tue Mar 24 15:44:10 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Jishnu Prakash X-Patchwork-Id: 11455901 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id EB799139A for ; Tue, 24 Mar 2020 15:46:24 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id A95B120774 for ; Tue, 24 Mar 2020 15:46:24 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=fail reason="signature verification failed" (1024-bit key) header.d=mg.codeaurora.org header.i=@mg.codeaurora.org header.b="RJ8SVFJt" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1728368AbgCXPqY (ORCPT ); Tue, 24 Mar 2020 11:46:24 -0400 Received: from mail26.static.mailgun.info ([104.130.122.26]:64969 "EHLO mail26.static.mailgun.info" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1728107AbgCXPqX (ORCPT ); Tue, 24 Mar 2020 11:46:23 -0400 DKIM-Signature: a=rsa-sha256; v=1; c=relaxed/relaxed; d=mg.codeaurora.org; q=dns/txt; s=smtp; t=1585064782; h=References: In-Reply-To: Message-Id: Date: Subject: Cc: To: From: Sender; bh=pEhwZ2hT2J8RnerqY6fNSRco2R/9Q/1O1NL264QvQ1k=; b=RJ8SVFJtil2wMInFwOHTTEAp0argDLH+kRXgyTaA5iGTqdN2cfFcr5Gq+QenDey4YKjXAksI YbLOMp/L6vQ8p9bF8rVbQ4rQahHfNf5L2eFFRoSY81x6QbtDT5pPl0Y6ASvBHsHKSk07aPZ9 RFps6Sp5fcLaHiN3K/aqUHMaHfY= X-Mailgun-Sending-Ip: 104.130.122.26 X-Mailgun-Sid: WyI3Mzk1NyIsICJsaW51eC1paW9Admdlci5rZXJuZWwub3JnIiwgImJlOWU0YSJd Received: from smtp.codeaurora.org (ec2-35-166-182-171.us-west-2.compute.amazonaws.com [35.166.182.171]) by mxa.mailgun.org with ESMTP id 5e7a2b41.7fd79ffff2d0-smtp-out-n03; Tue, 24 Mar 2020 15:46:09 -0000 (UTC) Received: by smtp.codeaurora.org (Postfix, from userid 1001) id 8A45CC44791; Tue, 24 Mar 2020 15:46:08 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-caf-mail-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-1.0 required=2.0 tests=ALL_TRUSTED,SPF_NONE, URIBL_BLOCKED autolearn=unavailable autolearn_force=no version=3.4.0 Received: from jprakash-linux.qualcomm.com (blr-c-bdr-fw-01_GlobalNAT_AllZones-Outside.qualcomm.com [103.229.19.19]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-SHA256 (128/128 bits)) (No client certificate requested) (Authenticated sender: jprakash) by smtp.codeaurora.org (Postfix) with ESMTPSA id C643BC433D2; Tue, 24 Mar 2020 15:45:55 +0000 (UTC) DMARC-Filter: OpenDMARC Filter v1.3.2 smtp.codeaurora.org C643BC433D2 Authentication-Results: aws-us-west-2-caf-mail-1.web.codeaurora.org; dmarc=none (p=none dis=none) header.from=codeaurora.org Authentication-Results: aws-us-west-2-caf-mail-1.web.codeaurora.org; spf=none smtp.mailfrom=jprakash@codeaurora.org From: Jishnu Prakash To: agross@kernel.org, bjorn.andersson@linaro.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, mka@chromium.org, linus.walleij@linaro.org, sboyd@codeaurora.org, Jonathan.Cameron@huawei.com, smohanad@codeaurora.org, kgunda@codeaurora.org, aghayal@codeaurora.org, Jonathan Cameron , Hartmut Knaack , Lars-Peter Clausen , Peter Meerwald-Stadler , Rob Herring , Mark Rutland , linux-arm-msm@vger.kernel.org, linux-iio@vger.kernel.org Cc: linux-arm-msm-owner@vger.kernel.org, Jishnu Prakash Subject: [PATCH 3/3] iio: adc: Add support for PMIC7 ADC Date: Tue, 24 Mar 2020 21:14:10 +0530 Message-Id: <1585064650-16235-4-git-send-email-jprakash@codeaurora.org> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1585064650-16235-1-git-send-email-jprakash@codeaurora.org> References: <1585064650-16235-1-git-send-email-jprakash@codeaurora.org> Sender: linux-iio-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-iio@vger.kernel.org The ADC architecture on PMIC7 is changed as compared to PMIC5. The major change from PMIC5 is that all SW communication to ADC goes through PMK8350, which communicates with other PMICs through PBS when the ADC on PMK8350 works in master mode. The SID register is used to identify the PMICs with which the PBS needs to communicate. Add support for the same. In addition, add definitions for ADC channels and virtual channel definitions per PMIC, to be used by ADC clients for PMIC7. Signed-off-by: Jishnu Prakash --- drivers/iio/adc/qcom-spmi-adc5.c | 239 ++++++++++++++++++++- drivers/iio/adc/qcom-vadc-common.c | 260 +++++++++++++++++++++++ drivers/iio/adc/qcom-vadc-common.h | 14 ++ include/dt-bindings/iio/qcom,spmi-adc7-pm8350.h | 67 ++++++ include/dt-bindings/iio/qcom,spmi-adc7-pm8350b.h | 88 ++++++++ include/dt-bindings/iio/qcom,spmi-adc7-pmk8350.h | 46 ++++ include/dt-bindings/iio/qcom,spmi-adc7-pmr735a.h | 28 +++ include/dt-bindings/iio/qcom,spmi-adc7-pmr735b.h | 28 +++ include/dt-bindings/iio/qcom,spmi-vadc.h | 78 ++++++- 9 files changed, 843 insertions(+), 5 deletions(-) create mode 100644 include/dt-bindings/iio/qcom,spmi-adc7-pm8350.h create mode 100644 include/dt-bindings/iio/qcom,spmi-adc7-pm8350b.h create mode 100644 include/dt-bindings/iio/qcom,spmi-adc7-pmk8350.h create mode 100644 include/dt-bindings/iio/qcom,spmi-adc7-pmr735a.h create mode 100644 include/dt-bindings/iio/qcom,spmi-adc7-pmr735b.h diff --git a/drivers/iio/adc/qcom-spmi-adc5.c b/drivers/iio/adc/qcom-spmi-adc5.c index 21fdcde..bcfb749 100644 --- a/drivers/iio/adc/qcom-spmi-adc5.c +++ b/drivers/iio/adc/qcom-spmi-adc5.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Copyright (c) 2018, The Linux Foundation. All rights reserved. + * Copyright (c) 2018, 2020, The Linux Foundation. All rights reserved. */ #include @@ -23,6 +23,7 @@ #define ADC5_USR_REVISION1 0x0 #define ADC5_USR_STATUS1 0x8 +#define ADC5_USR_STATUS1_CONV_FAULT BIT(7) #define ADC5_USR_STATUS1_REQ_STS BIT(1) #define ADC5_USR_STATUS1_EOC BIT(0) #define ADC5_USR_STATUS1_REQ_STS_EOC_MASK 0x3 @@ -65,6 +66,9 @@ #define ADC5_USR_IBAT_DATA1 0x53 +#define ADC_CHANNEL_OFFSET 0x8 +#define ADC_CHANNEL_MASK 0xff + /* * Conversion time varies based on the decimation, clock rate, fast average * samples and measurements queued across different VADC peripherals. @@ -79,6 +83,11 @@ #define ADC5_HW_SETTLE_DIFF_MINOR 3 #define ADC5_HW_SETTLE_DIFF_MAJOR 5 +/* For PMIC7 */ +#define ADC_APP_SID 0x40 +#define ADC_APP_SID_MASK 0xf +#define ADC7_CONV_TIMEOUT msecs_to_jiffies(10) + enum adc5_cal_method { ADC5_NO_CAL = 0, ADC5_RATIOMETRIC_CAL, @@ -96,6 +105,7 @@ enum adc5_cal_val { * @cal_method: calibration method. * @cal_val: calibration value * @decimation: sampling rate supported for the channel. + * @sid: slave id of PMIC owning the channel, for PMIC7. * @prescale: channel scaling performed on the input signal. * @hw_settle_time: the time between AMUX being configured and the * start of conversion. @@ -110,6 +120,7 @@ struct adc5_channel_prop { enum adc5_cal_method cal_method; enum adc5_cal_val cal_val; unsigned int decimation; + unsigned int sid; unsigned int prescale; unsigned int hw_settle_time; unsigned int avg_samples; @@ -140,6 +151,7 @@ struct adc5_chip { bool poll_eoc; struct completion complete; struct mutex lock; + bool is_pmic7; const struct adc5_data *data; }; @@ -165,6 +177,11 @@ static int adc5_write(struct adc5_chip *adc, u16 offset, u8 *data, int len) return regmap_bulk_write(adc->regmap, adc->base + offset, data, len); } +static int adc5_masked_write(struct adc5_chip *adc, u16 offset, u8 mask, u8 val) +{ + return regmap_update_bits(adc->regmap, adc->base + offset, mask, val); +} + static int adc5_prescaling_from_dt(u32 num, u32 den) { unsigned int pre; @@ -314,6 +331,49 @@ static int adc5_configure(struct adc5_chip *adc, return adc5_write(adc, ADC5_USR_DIG_PARAM, buf, sizeof(buf)); } +static int adc7_configure(struct adc5_chip *adc, + struct adc5_channel_prop *prop) +{ + int ret; + u8 conv_req = 0, buf[4]; + + ret = adc5_masked_write(adc, ADC_APP_SID, ADC_APP_SID_MASK, prop->sid); + if (ret) + return ret; + + ret = adc5_read(adc, ADC5_USR_DIG_PARAM, buf, sizeof(buf)); + if (ret < 0) + return ret; + + /* Digital param selection */ + adc5_update_dig_param(adc, prop, &buf[0]); + + /* Update fast average sample value */ + buf[1] &= (u8) ~ADC5_USR_FAST_AVG_CTL_SAMPLES_MASK; + buf[1] |= prop->avg_samples; + + /* Select ADC channel */ + buf[2] = prop->channel; + + /* Select HW settle delay for channel */ + buf[3] &= (u8) ~ADC5_USR_HW_SETTLE_DELAY_MASK; + buf[3] |= prop->hw_settle_time; + + /* Select CONV request */ + conv_req = ADC5_USR_CONV_REQ_REQ; + + if (!adc->poll_eoc) + reinit_completion(&adc->complete); + + ret = adc5_write(adc, ADC5_USR_DIG_PARAM, buf, sizeof(buf)); + if (ret) + return ret; + + ret = adc5_write(adc, ADC5_USR_CONV_REQ, &conv_req, 1); + + return ret; +} + static int adc5_do_conversion(struct adc5_chip *adc, struct adc5_channel_prop *prop, struct iio_chan_spec const *chan, @@ -355,6 +415,44 @@ static int adc5_do_conversion(struct adc5_chip *adc, return ret; } +static int adc7_do_conversion(struct adc5_chip *adc, + struct adc5_channel_prop *prop, + struct iio_chan_spec const *chan, + u16 *data_volt, u16 *data_cur) +{ + int ret; + u8 status = 0; + + mutex_lock(&adc->lock); + + ret = adc7_configure(adc, prop); + if (ret) { + pr_err("ADC configure failed with %d\n", ret); + goto unlock; + } + + /* No support for polling mode at present*/ + wait_for_completion_timeout(&adc->complete, + ADC7_CONV_TIMEOUT); + + ret = adc5_read(adc, ADC5_USR_STATUS1, &status, 1); + if (ret < 0) + goto unlock; + + if (status & ADC5_USR_STATUS1_CONV_FAULT) { + pr_err("Unexpected conversion fault\n"); + ret = -EIO; + goto unlock; + } + + ret = adc5_read_voltage_data(adc, data_volt); + +unlock: + mutex_unlock(&adc->lock); + + return ret; +} + static irqreturn_t adc5_isr(int irq, void *dev_id) { struct adc5_chip *adc = dev_id; @@ -377,6 +475,56 @@ static int adc5_of_xlate(struct iio_dev *indio_dev, return -EINVAL; } +static int adc7_of_xlate(struct iio_dev *indio_dev, + const struct of_phandle_args *iiospec) +{ + struct adc5_chip *adc = iio_priv(indio_dev); + int i, v_channel; + + for (i = 0; i < adc->nchannels; i++) { + v_channel = ((adc->chan_props[i].sid << ADC_CHANNEL_OFFSET) | + adc->chan_props[i].channel); + if (v_channel == iiospec->args[0]) + return i; + } + + return -EINVAL; +} + +static int adc7_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int *val, int *val2, + long mask) +{ + struct adc5_chip *adc = iio_priv(indio_dev); + struct adc5_channel_prop *prop; + u16 adc_code_volt, adc_code_cur; + int ret; + + prop = &adc->chan_props[chan->address]; + + switch (mask) { + case IIO_CHAN_INFO_PROCESSED: + ret = adc7_do_conversion(adc, prop, chan, + &adc_code_volt, &adc_code_cur); + if (ret) + return ret; + + ret = qcom_adc5_hw_scale(prop->scale_fn_type, + &adc5_prescale_ratios[prop->prescale], + adc->data, + adc_code_volt, val); + + if (ret) + return ret; + + return IIO_VAL_INT; + default: + return -EINVAL; + } + + return 0; +} + static int adc5_read_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan, int *val, int *val2, long mask) @@ -415,6 +563,11 @@ static const struct iio_info adc5_info = { .of_xlate = adc5_of_xlate, }; +static const struct iio_info adc7_info = { + .read_raw = adc7_read_raw, + .of_xlate = adc7_of_xlate, +}; + struct adc5_channels { const char *datasheet_name; unsigned int prescale_index; @@ -477,6 +630,39 @@ static const struct adc5_channels adc5_chans_pmic[ADC5_MAX_CHANNEL] = { SCALE_HW_CALIB_PM5_SMB_TEMP) }; +static const struct adc5_channels adc7_chans_pmic[ADC5_MAX_CHANNEL] = { + [ADC7_REF_GND] = ADC5_CHAN_VOLT("ref_gnd", 0, + SCALE_HW_CALIB_DEFAULT) + [ADC7_1P25VREF] = ADC5_CHAN_VOLT("vref_1p25", 0, + SCALE_HW_CALIB_DEFAULT) + [ADC7_VPH_PWR] = ADC5_CHAN_VOLT("vph_pwr", 1, + SCALE_HW_CALIB_DEFAULT) + [ADC7_VBAT_SNS] = ADC5_CHAN_VOLT("vbat_sns", 3, + SCALE_HW_CALIB_DEFAULT) + [ADC7_DIE_TEMP] = ADC5_CHAN_TEMP("die_temp", 0, + SCALE_HW_CALIB_PMIC_THERM_PM7) + [ADC7_AMUX_THM1_100K_PU] = ADC5_CHAN_TEMP("amux_thm1_pu2", 0, + SCALE_HW_CALIB_THERM_100K_PU_PM7) + [ADC7_AMUX_THM2_100K_PU] = ADC5_CHAN_TEMP("amux_thm2_pu2", 0, + SCALE_HW_CALIB_THERM_100K_PU_PM7) + [ADC7_AMUX_THM3_100K_PU] = ADC5_CHAN_TEMP("amux_thm3_pu2", 0, + SCALE_HW_CALIB_THERM_100K_PU_PM7) + [ADC7_AMUX_THM4_100K_PU] = ADC5_CHAN_TEMP("amux_thm4_pu2", 0, + SCALE_HW_CALIB_THERM_100K_PU_PM7) + [ADC7_AMUX_THM5_100K_PU] = ADC5_CHAN_TEMP("amux_thm5_pu2", 0, + SCALE_HW_CALIB_THERM_100K_PU_PM7) + [ADC7_AMUX_THM6_100K_PU] = ADC5_CHAN_TEMP("amux_thm6_pu2", 0, + SCALE_HW_CALIB_THERM_100K_PU_PM7) + [ADC7_GPIO1_100K_PU] = ADC5_CHAN_TEMP("gpio1_pu2", 0, + SCALE_HW_CALIB_THERM_100K_PU_PM7) + [ADC7_GPIO2_100K_PU] = ADC5_CHAN_TEMP("gpio2_pu2", 0, + SCALE_HW_CALIB_THERM_100K_PU_PM7) + [ADC7_GPIO3_100K_PU] = ADC5_CHAN_TEMP("gpio3_pu2", 0, + SCALE_HW_CALIB_THERM_100K_PU_PM7) + [ADC7_GPIO4_100K_PU] = ADC5_CHAN_TEMP("gpio4_pu2", 0, + SCALE_HW_CALIB_THERM_100K_PU_PM7) +}; + static const struct adc5_channels adc5_chans_rev2[ADC5_MAX_CHANNEL] = { [ADC5_REF_GND] = ADC5_CHAN_VOLT("ref_gnd", 0, SCALE_HW_CALIB_DEFAULT) @@ -511,6 +697,7 @@ static int adc5_get_dt_channel_data(struct adc5_chip *adc, { const char *name = node->name, *channel_name; u32 chan, value, varr[2]; + u32 sid = 0; int ret; struct device *dev = adc->dev; @@ -520,6 +707,15 @@ static int adc5_get_dt_channel_data(struct adc5_chip *adc, return ret; } + /* + * Value read from "reg" is virtual channel number + * virtual channel number = (sid << 8 | channel number). + */ + if (adc->is_pmic7) { + sid = (chan >> ADC_CHANNEL_OFFSET); + chan = (chan & ADC_CHANNEL_MASK); + } + if (chan > ADC5_PARALLEL_ISENSE_VBAT_IDATA || !data->adc_chans[chan].datasheet_name) { dev_err(dev, "%s invalid channel number %d\n", name, chan); @@ -528,6 +724,7 @@ static int adc5_get_dt_channel_data(struct adc5_chip *adc, /* the channel has DT description */ prop->channel = chan; + prop->sid = sid; channel_name = of_get_property(node, "label", NULL) ? : node->name; @@ -578,8 +775,9 @@ static int adc5_get_dt_channel_data(struct adc5_chip *adc, pr_debug("dig_ver:minor:%d, major:%d\n", dig_version[0], dig_version[1]); /* Digital controller >= 5.3 have hw_settle_2 option */ - if (dig_version[0] >= ADC5_HW_SETTLE_DIFF_MINOR && - dig_version[1] >= ADC5_HW_SETTLE_DIFF_MAJOR) + if ((dig_version[0] >= ADC5_HW_SETTLE_DIFF_MINOR && + dig_version[1] >= ADC5_HW_SETTLE_DIFF_MAJOR) || + (adc->is_pmic7)) ret = adc5_hw_settle_time_from_dt(value, data->hw_settle_2); else @@ -639,6 +837,17 @@ static const struct adc5_data adc5_data_pmic = { 1, 2, 4, 8, 16, 32, 64, 128}, }; +static const struct adc5_data adc7_data_pmic = { + .full_scale_code_volt = 0x70e4, + .adc_chans = adc7_chans_pmic, + .decimation = (unsigned int [ADC5_DECIMATION_SAMPLES_MAX]) + {85, 340, 1360}, + .hw_settle_2 = (unsigned int [VADC_HW_SETTLE_SAMPLES_MAX]) + {15, 100, 200, 300, 400, 500, 600, 700, + 1000, 2000, 4000, 8000, 16000, 32000, + 64000, 128000}, +}; + static const struct adc5_data adc5_data_pmic_rev2 = { .full_scale_code_volt = 0x4000, .full_scale_code_cur = 0x1800, @@ -659,6 +868,10 @@ static const struct of_device_id adc5_match_table[] = { .data = &adc5_data_pmic, }, { + .compatible = "qcom,spmi-adc7", + .data = &adc7_data_pmic, + }, + { .compatible = "qcom,spmi-adc-rev2", .data = &adc5_data_pmic_rev2, }, @@ -752,6 +965,16 @@ static int adc5_probe(struct platform_device *pdev) adc->regmap = regmap; adc->dev = dev; adc->base = reg; + + platform_set_drvdata(pdev, adc); + + if (of_device_is_compatible(node, "qcom,spmi-adc7")) { + indio_dev->info = &adc7_info; + adc->is_pmic7 = true; + } else { + indio_dev->info = &adc5_info; + } + init_completion(&adc->complete); mutex_init(&adc->lock); @@ -777,19 +1000,27 @@ static int adc5_probe(struct platform_device *pdev) indio_dev->dev.of_node = node; indio_dev->name = pdev->name; indio_dev->modes = INDIO_DIRECT_MODE; - indio_dev->info = &adc5_info; indio_dev->channels = adc->iio_chans; indio_dev->num_channels = adc->nchannels; return devm_iio_device_register(dev, indio_dev); } +static int adc5_exit(struct platform_device *pdev) +{ + struct adc5_chip *adc = platform_get_drvdata(pdev); + + mutex_destroy(&adc->lock); + return 0; +} + static struct platform_driver adc5_driver = { .driver = { .name = "qcom-spmi-adc5.c", .of_match_table = adc5_match_table, }, .probe = adc5_probe, + .remove = adc5_exit, }; module_platform_driver(adc5_driver); diff --git a/drivers/iio/adc/qcom-vadc-common.c b/drivers/iio/adc/qcom-vadc-common.c index 2bb78d1..43d2473 100644 --- a/drivers/iio/adc/qcom-vadc-common.c +++ b/drivers/iio/adc/qcom-vadc-common.c @@ -89,6 +89,195 @@ static const struct vadc_map_pt adcmap_100k_104ef_104fb_1875_vref[] = { { 46, 125000 }, }; +static const struct vadc_map_pt adcmap7_die_temp[] = { + { 433700, 1967}, + { 473100, 1964}, + { 512400, 1957}, + { 551500, 1949}, + { 590500, 1940}, + { 629300, 1930}, + { 667900, 1921}, + { 706400, 1910}, + { 744600, 1896}, + { 782500, 1878}, + { 820100, 1859}, + { 857300, 0}, +}; + +/* + * Resistance to temperature table for 100k pull up for NTCG104EF104. + */ +static const struct vadc_map_pt adcmap7_100k[] = { + { 4250657, -40960 }, + { 3962085, -39936 }, + { 3694875, -38912 }, + { 3447322, -37888 }, + { 3217867, -36864 }, + { 3005082, -35840 }, + { 2807660, -34816 }, + { 2624405, -33792 }, + { 2454218, -32768 }, + { 2296094, -31744 }, + { 2149108, -30720 }, + { 2012414, -29696 }, + { 1885232, -28672 }, + { 1766846, -27648 }, + { 1656598, -26624 }, + { 1553884, -25600 }, + { 1458147, -24576 }, + { 1368873, -23552 }, + { 1285590, -22528 }, + { 1207863, -21504 }, + { 1135290, -20480 }, + { 1067501, -19456 }, + { 1004155, -18432 }, + { 944935, -17408 }, + { 889550, -16384 }, + { 837731, -15360 }, + { 789229, -14336 }, + { 743813, -13312 }, + { 701271, -12288 }, + { 661405, -11264 }, + { 624032, -10240 }, + { 588982, -9216 }, + { 556100, -8192 }, + { 525239, -7168 }, + { 496264, -6144 }, + { 469050, -5120 }, + { 443480, -4096 }, + { 419448, -3072 }, + { 396851, -2048 }, + { 375597, -1024 }, + { 355598, 0 }, + { 336775, 1024 }, + { 319052, 2048 }, + { 302359, 3072 }, + { 286630, 4096 }, + { 271806, 5120 }, + { 257829, 6144 }, + { 244646, 7168 }, + { 232209, 8192 }, + { 220471, 9216 }, + { 209390, 10240 }, + { 198926, 11264 }, + { 189040, 12288 }, + { 179698, 13312 }, + { 170868, 14336 }, + { 162519, 15360 }, + { 154622, 16384 }, + { 147150, 17408 }, + { 140079, 18432 }, + { 133385, 19456 }, + { 127046, 20480 }, + { 121042, 21504 }, + { 115352, 22528 }, + { 109960, 23552 }, + { 104848, 24576 }, + { 100000, 25600 }, + { 95402, 26624 }, + { 91038, 27648 }, + { 86897, 28672 }, + { 82965, 29696 }, + { 79232, 30720 }, + { 75686, 31744 }, + { 72316, 32768 }, + { 69114, 33792 }, + { 66070, 34816 }, + { 63176, 35840 }, + { 60423, 36864 }, + { 57804, 37888 }, + { 55312, 38912 }, + { 52940, 39936 }, + { 50681, 40960 }, + { 48531, 41984 }, + { 46482, 43008 }, + { 44530, 44032 }, + { 42670, 45056 }, + { 40897, 46080 }, + { 39207, 47104 }, + { 37595, 48128 }, + { 36057, 49152 }, + { 34590, 50176 }, + { 33190, 51200 }, + { 31853, 52224 }, + { 30577, 53248 }, + { 29358, 54272 }, + { 28194, 55296 }, + { 27082, 56320 }, + { 26020, 57344 }, + { 25004, 58368 }, + { 24033, 59392 }, + { 23104, 60416 }, + { 22216, 61440 }, + { 21367, 62464 }, + { 20554, 63488 }, + { 19776, 64512 }, + { 19031, 65536 }, + { 18318, 66560 }, + { 17636, 67584 }, + { 16982, 68608 }, + { 16355, 69632 }, + { 15755, 70656 }, + { 15180, 71680 }, + { 14628, 72704 }, + { 14099, 73728 }, + { 13592, 74752 }, + { 13106, 75776 }, + { 12640, 76800 }, + { 12192, 77824 }, + { 11762, 78848 }, + { 11350, 79872 }, + { 10954, 80896 }, + { 10574, 81920 }, + { 10209, 82944 }, + { 9858, 83968 }, + { 9521, 84992 }, + { 9197, 86016 }, + { 8886, 87040 }, + { 8587, 88064 }, + { 8299, 89088 }, + { 8023, 90112 }, + { 7757, 91136 }, + { 7501, 92160 }, + { 7254, 93184 }, + { 7017, 94208 }, + { 6789, 95232 }, + { 6570, 96256 }, + { 6358, 97280 }, + { 6155, 98304 }, + { 5959, 99328 }, + { 5770, 100352 }, + { 5588, 101376 }, + { 5412, 102400 }, + { 5243, 103424 }, + { 5080, 104448 }, + { 4923, 105472 }, + { 4771, 106496 }, + { 4625, 107520 }, + { 4484, 108544 }, + { 4348, 109568 }, + { 4217, 110592 }, + { 4090, 111616 }, + { 3968, 112640 }, + { 3850, 113664 }, + { 3736, 114688 }, + { 3626, 115712 }, + { 3519, 116736 }, + { 3417, 117760 }, + { 3317, 118784 }, + { 3221, 119808 }, + { 3129, 120832 }, + { 3039, 121856 }, + { 2952, 122880 }, + { 2868, 123904 }, + { 2787, 124928 }, + { 2709, 125952 }, + { 2633, 126976 }, + { 2560, 128000 }, + { 2489, 129024 }, + { 2420, 130048 } +}; + static int qcom_vadc_scale_hw_calib_volt( const struct vadc_prescale_ratio *prescale, const struct adc5_data *data, @@ -97,6 +286,10 @@ static int qcom_vadc_scale_hw_calib_therm( const struct vadc_prescale_ratio *prescale, const struct adc5_data *data, u16 adc_code, int *result_mdec); +static int qcom_vadc7_scale_hw_calib_therm( + const struct vadc_prescale_ratio *prescale, + const struct adc5_data *data, + u16 adc_code, int *result_mdec); static int qcom_vadc_scale_hw_smb_temp( const struct vadc_prescale_ratio *prescale, const struct adc5_data *data, @@ -109,12 +302,20 @@ static int qcom_vadc_scale_hw_calib_die_temp( const struct vadc_prescale_ratio *prescale, const struct adc5_data *data, u16 adc_code, int *result_mdec); +static int qcom_vadc7_scale_hw_calib_die_temp( + const struct vadc_prescale_ratio *prescale, + const struct adc5_data *data, + u16 adc_code, int *result_mdec); static struct qcom_adc5_scale_type scale_adc5_fn[] = { [SCALE_HW_CALIB_DEFAULT] = {qcom_vadc_scale_hw_calib_volt}, [SCALE_HW_CALIB_THERM_100K_PULLUP] = {qcom_vadc_scale_hw_calib_therm}, [SCALE_HW_CALIB_XOTHERM] = {qcom_vadc_scale_hw_calib_therm}, + [SCALE_HW_CALIB_THERM_100K_PU_PM7] = { + qcom_vadc7_scale_hw_calib_therm}, [SCALE_HW_CALIB_PMIC_THERM] = {qcom_vadc_scale_hw_calib_die_temp}, + [SCALE_HW_CALIB_PMIC_THERM_PM7] = { + qcom_vadc7_scale_hw_calib_die_temp}, [SCALE_HW_CALIB_PM5_CHG_TEMP] = {qcom_vadc_scale_hw_chg5_temp}, [SCALE_HW_CALIB_PM5_SMB_TEMP] = {qcom_vadc_scale_hw_smb_temp}, }; @@ -291,6 +492,32 @@ static int qcom_vadc_scale_code_voltage_factor(u16 adc_code, return (int) voltage; } +static int qcom_vadc7_scale_hw_calib_therm( + const struct vadc_prescale_ratio *prescale, + const struct adc5_data *data, + u16 adc_code, int *result_mdec) +{ + s64 resistance = 0; + int ret, result = 0; + + if (adc_code >= RATIO_MAX_ADC7) + return -EINVAL; + + /* (ADC code * R_PULLUP (100Kohm)) / (full_scale_code - ADC code)*/ + resistance = (s64) adc_code * R_PU_100K; + resistance = div64_s64(resistance, (RATIO_MAX_ADC7 - adc_code)); + + ret = qcom_vadc_map_voltage_temp(adcmap7_100k, + ARRAY_SIZE(adcmap7_100k), + resistance, &result); + if (ret) + return ret; + + *result_mdec = result; + + return 0; +} + static int qcom_vadc_scale_hw_calib_volt( const struct vadc_prescale_ratio *prescale, const struct adc5_data *data, @@ -330,6 +557,39 @@ static int qcom_vadc_scale_hw_calib_die_temp( return 0; } +static int qcom_vadc7_scale_hw_calib_die_temp( + const struct vadc_prescale_ratio *prescale, + const struct adc5_data *data, + u16 adc_code, int *result_mdec) +{ + + int voltage, vtemp0, temp, i = 0; + + voltage = qcom_vadc_scale_code_voltage_factor(adc_code, + prescale, data, 1); + + while (i < ARRAY_SIZE(adcmap7_die_temp)) { + if (adcmap7_die_temp[i].x > voltage) + break; + i++; + } + + if (i == 0) { + *result_mdec = DIE_TEMP_ADC7_SCALE_1; + } else if (i == ARRAY_SIZE(adcmap7_die_temp)) { + *result_mdec = DIE_TEMP_ADC7_MAX; + } else { + vtemp0 = adcmap7_die_temp[i-1].x; + voltage = voltage - vtemp0; + temp = div64_s64(voltage * DIE_TEMP_ADC7_SCALE_FACTOR, + adcmap7_die_temp[i-1].y); + temp += DIE_TEMP_ADC7_SCALE_1 + (DIE_TEMP_ADC7_SCALE_2 * (i-1)); + *result_mdec = temp; + } + + return 0; +} + static int qcom_vadc_scale_hw_smb_temp( const struct vadc_prescale_ratio *prescale, const struct adc5_data *data, diff --git a/drivers/iio/adc/qcom-vadc-common.h b/drivers/iio/adc/qcom-vadc-common.h index e074902a..5f9e680 100644 --- a/drivers/iio/adc/qcom-vadc-common.h +++ b/drivers/iio/adc/qcom-vadc-common.h @@ -49,6 +49,14 @@ #define ADC5_FULL_SCALE_CODE 0x70e4 #define ADC5_USR_DATA_CHECK 0x8000 +#define R_PU_100K 100000 +#define RATIO_MAX_ADC7 0x4000 + +#define DIE_TEMP_ADC7_SCALE_1 -60000 +#define DIE_TEMP_ADC7_SCALE_2 20000 +#define DIE_TEMP_ADC7_SCALE_FACTOR 1000 +#define DIE_TEMP_ADC7_MAX 160000 + /** * struct vadc_map_pt - Map the graph representation for ADC channel * @x: Represent the ADC digitized code. @@ -110,8 +118,12 @@ struct vadc_prescale_ratio { * lookup table. The hardware applies offset/slope to adc code. * SCALE_HW_CALIB_XOTHERM: Returns XO thermistor voltage in millidegC using * 100k pullup. The hardware applies offset/slope to adc code. + * SCALE_HW_CALIB_THERM_100K_PU_PM7: Returns temperature in millidegC using + * lookup table for PMIC7. The hardware applies offset/slope to adc code. * SCALE_HW_CALIB_PMIC_THERM: Returns result in milli degree's Centigrade. * The hardware applies offset/slope to adc code. + * SCALE_HW_CALIB_PMIC_THERM: Returns result in milli degree's Centigrade. + * The hardware applies offset/slope to adc code. This is for PMIC7. * SCALE_HW_CALIB_PM5_CHG_TEMP: Returns result in millidegrees for PMIC5 * charger temperature. * SCALE_HW_CALIB_PM5_SMB_TEMP: Returns result in millidegrees for PMIC5 @@ -126,7 +138,9 @@ enum vadc_scale_fn_type { SCALE_HW_CALIB_DEFAULT, SCALE_HW_CALIB_THERM_100K_PULLUP, SCALE_HW_CALIB_XOTHERM, + SCALE_HW_CALIB_THERM_100K_PU_PM7, SCALE_HW_CALIB_PMIC_THERM, + SCALE_HW_CALIB_PMIC_THERM_PM7, SCALE_HW_CALIB_PM5_CHG_TEMP, SCALE_HW_CALIB_PM5_SMB_TEMP, SCALE_HW_CALIB_INVALID, diff --git a/include/dt-bindings/iio/qcom,spmi-adc7-pm8350.h b/include/dt-bindings/iio/qcom,spmi-adc7-pm8350.h new file mode 100644 index 0000000..9426f27 --- /dev/null +++ b/include/dt-bindings/iio/qcom,spmi-adc7-pm8350.h @@ -0,0 +1,67 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (c) 2020, The Linux Foundation. All rights reserved. + */ + +#ifndef _DT_BINDINGS_QCOM_SPMI_VADC_PM8350_H +#define _DT_BINDINGS_QCOM_SPMI_VADC_PM8350_H + +#ifndef PM8350_SID +#define PM8350_SID 1 +#endif + +/* ADC channels for PM8350_ADC for PMIC7 */ +#define PM8350_ADC7_REF_GND (PM8350_SID << 8 | 0x0) +#define PM8350_ADC7_1P25VREF (PM8350_SID << 8 | 0x01) +#define PM8350_ADC7_VREF_VADC (PM8350_SID << 8 | 0x02) +#define PM8350_ADC7_DIE_TEMP (PM8350_SID << 8 | 0x03) + +#define PM8350_ADC7_AMUX_THM1 (PM8350_SID << 8 | 0x04) +#define PM8350_ADC7_AMUX_THM2 (PM8350_SID << 8 | 0x05) +#define PM8350_ADC7_AMUX_THM3 (PM8350_SID << 8 | 0x06) +#define PM8350_ADC7_AMUX_THM4 (PM8350_SID << 8 | 0x07) +#define PM8350_ADC7_AMUX_THM5 (PM8350_SID << 8 | 0x08) +#define PM8350_ADC7_GPIO1 (PM8350_SID << 8 | 0x0a) +#define PM8350_ADC7_GPIO2 (PM8350_SID << 8 | 0x0b) +#define PM8350_ADC7_GPIO3 (PM8350_SID << 8 | 0x0c) +#define PM8350_ADC7_GPIO4 (PM8350_SID << 8 | 0x0d) + +/* 30k pull-up1 */ +#define PM8350_ADC7_AMUX_THM1_30K_PU (PM8350_SID << 8 | 0x24) +#define PM8350_ADC7_AMUX_THM2_30K_PU (PM8350_SID << 8 | 0x25) +#define PM8350_ADC7_AMUX_THM3_30K_PU (PM8350_SID << 8 | 0x26) +#define PM8350_ADC7_AMUX_THM4_30K_PU (PM8350_SID << 8 | 0x27) +#define PM8350_ADC7_AMUX_THM5_30K_PU (PM8350_SID << 8 | 0x28) +#define PM8350_ADC7_GPIO1_30K_PU (PM8350_SID << 8 | 0x2a) +#define PM8350_ADC7_GPIO2_30K_PU (PM8350_SID << 8 | 0x2b) +#define PM8350_ADC7_GPIO3_30K_PU (PM8350_SID << 8 | 0x2c) +#define PM8350_ADC7_GPIO4_30K_PU (PM8350_SID << 8 | 0x2d) + +/* 100k pull-up2 */ +#define PM8350_ADC7_AMUX_THM1_100K_PU (PM8350_SID << 8 | 0x44) +#define PM8350_ADC7_AMUX_THM2_100K_PU (PM8350_SID << 8 | 0x45) +#define PM8350_ADC7_AMUX_THM3_100K_PU (PM8350_SID << 8 | 0x46) +#define PM8350_ADC7_AMUX_THM4_100K_PU (PM8350_SID << 8 | 0x47) +#define PM8350_ADC7_AMUX_THM5_100K_PU (PM8350_SID << 8 | 0x48) +#define PM8350_ADC7_GPIO1_100K_PU (PM8350_SID << 8 | 0x4a) +#define PM8350_ADC7_GPIO2_100K_PU (PM8350_SID << 8 | 0x4b) +#define PM8350_ADC7_GPIO3_100K_PU (PM8350_SID << 8 | 0x4c) +#define PM8350_ADC7_GPIO4_100K_PU (PM8350_SID << 8 | 0x4d) + +/* 400k pull-up3 */ +#define PM8350_ADC7_AMUX_THM1_400K_PU (PM8350_SID << 8 | 0x64) +#define PM8350_ADC7_AMUX_THM2_400K_PU (PM8350_SID << 8 | 0x65) +#define PM8350_ADC7_AMUX_THM3_400K_PU (PM8350_SID << 8 | 0x66) +#define PM8350_ADC7_AMUX_THM4_400K_PU (PM8350_SID << 8 | 0x67) +#define PM8350_ADC7_AMUX_THM5_400K_PU (PM8350_SID << 8 | 0x68) +#define PM8350_ADC7_GPIO1_400K_PU (PM8350_SID << 8 | 0x6a) +#define PM8350_ADC7_GPIO2_400K_PU (PM8350_SID << 8 | 0x6b) +#define PM8350_ADC7_GPIO3_400K_PU (PM8350_SID << 8 | 0x6c) +#define PM8350_ADC7_GPIO4_400K_PU (PM8350_SID << 8 | 0x6d) + +/* 1/3 Divider */ +#define PM8350_ADC7_GPIO4_DIV3 (PM8350_SID << 8 | 0x8d) + +#define PM8350_ADC7_VPH_PWR (PM8350_SID << 8 | 0x8e) + +#endif /* _DT_BINDINGS_QCOM_SPMI_VADC_PM8350_H */ diff --git a/include/dt-bindings/iio/qcom,spmi-adc7-pm8350b.h b/include/dt-bindings/iio/qcom,spmi-adc7-pm8350b.h new file mode 100644 index 0000000..dc2497c --- /dev/null +++ b/include/dt-bindings/iio/qcom,spmi-adc7-pm8350b.h @@ -0,0 +1,88 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (c) 2020 The Linux Foundation. All rights reserved. + */ + +#ifndef _DT_BINDINGS_QCOM_SPMI_VADC_PM8350B_H +#define _DT_BINDINGS_QCOM_SPMI_VADC_PM8350B_H + +#ifndef PM8350B_SID +#define PM8350B_SID 3 +#endif + +/* ADC channels for PM8350B_ADC for PMIC7 */ +#define PM8350B_ADC7_REF_GND (PM8350B_SID << 8 | 0x0) +#define PM8350B_ADC7_1P25VREF (PM8350B_SID << 8 | 0x01) +#define PM8350B_ADC7_VREF_VADC (PM8350B_SID << 8 | 0x02) +#define PM8350B_ADC7_DIE_TEMP (PM8350B_SID << 8 | 0x03) + +#define PM8350B_ADC7_AMUX_THM1 (PM8350B_SID << 8 | 0x04) +#define PM8350B_ADC7_AMUX_THM2 (PM8350B_SID << 8 | 0x05) +#define PM8350B_ADC7_AMUX_THM3 (PM8350B_SID << 8 | 0x06) +#define PM8350B_ADC7_AMUX_THM4 (PM8350B_SID << 8 | 0x07) +#define PM8350B_ADC7_AMUX_THM5 (PM8350B_SID << 8 | 0x08) +#define PM8350B_ADC7_AMUX_THM6 (PM8350B_SID << 8 | 0x09) +#define PM8350B_ADC7_GPIO1 (PM8350B_SID << 8 | 0x0a) +#define PM8350B_ADC7_GPIO2 (PM8350B_SID << 8 | 0x0b) +#define PM8350B_ADC7_GPIO3 (PM8350B_SID << 8 | 0x0c) +#define PM8350B_ADC7_GPIO4 (PM8350B_SID << 8 | 0x0d) + +#define PM8350B_ADC7_CHG_TEMP (PM8350B_SID << 8 | 0x10) +#define PM8350B_ADC7_USB_IN_V_16 (PM8350B_SID << 8 | 0x11) +#define PM8350B_ADC7_VDC_16 (PM8350B_SID << 8 | 0x12) +#define PM8350B_ADC7_CC1_ID (PM8350B_SID << 8 | 0x13) +#define PM8350B_ADC7_VREF_BAT_THERM (PM8350B_SID << 8 | 0x15) +#define PM8350B_ADC7_IIN_FB (PM8350B_SID << 8 | 0x17) + +/* 30k pull-up1 */ +#define PM8350B_ADC7_AMUX_THM1_30K_PU (PM8350B_SID << 8 | 0x24) +#define PM8350B_ADC7_AMUX_THM2_30K_PU (PM8350B_SID << 8 | 0x25) +#define PM8350B_ADC7_AMUX_THM3_30K_PU (PM8350B_SID << 8 | 0x26) +#define PM8350B_ADC7_AMUX_THM4_30K_PU (PM8350B_SID << 8 | 0x27) +#define PM8350B_ADC7_AMUX_THM5_30K_PU (PM8350B_SID << 8 | 0x28) +#define PM8350B_ADC7_AMUX_THM6_30K_PU (PM8350B_SID << 8 | 0x29) +#define PM8350B_ADC7_GPIO1_30K_PU (PM8350B_SID << 8 | 0x2a) +#define PM8350B_ADC7_GPIO2_30K_PU (PM8350B_SID << 8 | 0x2b) +#define PM8350B_ADC7_GPIO3_30K_PU (PM8350B_SID << 8 | 0x2c) +#define PM8350B_ADC7_GPIO4_30K_PU (PM8350B_SID << 8 | 0x2d) +#define PM8350B_ADC7_CC1_ID_30K_PU (PM8350B_SID << 8 | 0x33) + +/* 100k pull-up2 */ +#define PM8350B_ADC7_AMUX_THM1_100K_PU (PM8350B_SID << 8 | 0x44) +#define PM8350B_ADC7_AMUX_THM2_100K_PU (PM8350B_SID << 8 | 0x45) +#define PM8350B_ADC7_AMUX_THM3_100K_PU (PM8350B_SID << 8 | 0x46) +#define PM8350B_ADC7_AMUX_THM4_100K_PU (PM8350B_SID << 8 | 0x47) +#define PM8350B_ADC7_AMUX_THM5_100K_PU (PM8350B_SID << 8 | 0x48) +#define PM8350B_ADC7_AMUX_THM6_100K_PU (PM8350B_SID << 8 | 0x49) +#define PM8350B_ADC7_GPIO1_100K_PU (PM8350B_SID << 8 | 0x4a) +#define PM8350B_ADC7_GPIO2_100K_PU (PM8350B_SID << 8 | 0x4b) +#define PM8350B_ADC7_GPIO3_100K_PU (PM8350B_SID << 8 | 0x4c) +#define PM8350B_ADC7_GPIO4_100K_PU (PM8350B_SID << 8 | 0x4d) +#define PM8350B_ADC7_CC1_ID_100K_PU (PM8350B_SID << 8 | 0x53) + +/* 400k pull-up3 */ +#define PM8350B_ADC7_AMUX_THM1_400K_PU (PM8350B_SID << 8 | 0x64) +#define PM8350B_ADC7_AMUX_THM2_400K_PU (PM8350B_SID << 8 | 0x65) +#define PM8350B_ADC7_AMUX_THM3_400K_PU (PM8350B_SID << 8 | 0x66) +#define PM8350B_ADC7_AMUX_THM4_400K_PU (PM8350B_SID << 8 | 0x67) +#define PM8350B_ADC7_AMUX_THM5_400K_PU (PM8350B_SID << 8 | 0x68) +#define PM8350B_ADC7_AMUX_THM6_400K_PU (PM8350B_SID << 8 | 0x69) +#define PM8350B_ADC7_GPIO1_400K_PU (PM8350B_SID << 8 | 0x6a) +#define PM8350B_ADC7_GPIO2_400K_PU (PM8350B_SID << 8 | 0x6b) +#define PM8350B_ADC7_GPIO3_400K_PU (PM8350B_SID << 8 | 0x6c) +#define PM8350B_ADC7_GPIO4_400K_PU (PM8350B_SID << 8 | 0x6d) +#define PM8350B_ADC7_CC1_ID_400K_PU (PM8350B_SID << 8 | 0x73) + +/* 1/3 Divider */ +#define PM8350B_ADC7_GPIO1_DIV3 (PM8350B_SID << 8 | 0x8a) +#define PM8350B_ADC7_GPIO2_DIV3 (PM8350B_SID << 8 | 0x8b) +#define PM8350B_ADC7_GPIO3_DIV3 (PM8350B_SID << 8 | 0x8c) +#define PM8350B_ADC7_GPIO4_DIV3 (PM8350B_SID << 8 | 0x8d) + +#define PM8350B_ADC7_VPH_PWR (PM8350B_SID << 8 | 0x8e) +#define PM8350B_ADC7_VBAT_SNS (PM8350B_SID << 8 | 0x8f) + +#define PM8350B_ADC7_SBUx (PM8350B_SID << 8 | 0x94) +#define PM8350B_ADC7_VBAT_2S_MID (PM8350B_SID << 8 | 0x96) + +#endif /* _DT_BINDINGS_QCOM_SPMI_VADC_PM8350B_H */ diff --git a/include/dt-bindings/iio/qcom,spmi-adc7-pmk8350.h b/include/dt-bindings/iio/qcom,spmi-adc7-pmk8350.h new file mode 100644 index 0000000..6c29687 --- /dev/null +++ b/include/dt-bindings/iio/qcom,spmi-adc7-pmk8350.h @@ -0,0 +1,46 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (c) 2020 The Linux Foundation. All rights reserved. + */ + +#ifndef _DT_BINDINGS_QCOM_SPMI_VADC_PMK8350_H +#define _DT_BINDINGS_QCOM_SPMI_VADC_PMK8350_H + +#ifndef PMK8350_SID +#define PMK8350_SID 0 +#endif + +/* ADC channels for PMK8350_ADC for PMIC7 */ +#define PMK8350_ADC7_REF_GND (PMK8350_SID << 8 | 0x0) +#define PMK8350_ADC7_1P25VREF (PMK8350_SID << 8 | 0x01) +#define PMK8350_ADC7_VREF_VADC (PMK8350_SID << 8 | 0x02) +#define PMK8350_ADC7_DIE_TEMP (PMK8350_SID << 8 | 0x03) + +#define PMK8350_ADC7_AMUX_THM1 (PMK8350_SID << 8 | 0x04) +#define PMK8350_ADC7_AMUX_THM2 (PMK8350_SID << 8 | 0x05) +#define PMK8350_ADC7_AMUX_THM3 (PMK8350_SID << 8 | 0x06) +#define PMK8350_ADC7_AMUX_THM4 (PMK8350_SID << 8 | 0x07) +#define PMK8350_ADC7_AMUX_THM5 (PMK8350_SID << 8 | 0x08) + +/* 30k pull-up1 */ +#define PMK8350_ADC7_AMUX_THM1_30K_PU (PMK8350_SID << 8 | 0x24) +#define PMK8350_ADC7_AMUX_THM2_30K_PU (PMK8350_SID << 8 | 0x25) +#define PMK8350_ADC7_AMUX_THM3_30K_PU (PMK8350_SID << 8 | 0x26) +#define PMK8350_ADC7_AMUX_THM4_30K_PU (PMK8350_SID << 8 | 0x27) +#define PMK8350_ADC7_AMUX_THM5_30K_PU (PMK8350_SID << 8 | 0x28) + +/* 100k pull-up2 */ +#define PMK8350_ADC7_AMUX_THM1_100K_PU (PMK8350_SID << 8 | 0x44) +#define PMK8350_ADC7_AMUX_THM2_100K_PU (PMK8350_SID << 8 | 0x45) +#define PMK8350_ADC7_AMUX_THM3_100K_PU (PMK8350_SID << 8 | 0x46) +#define PMK8350_ADC7_AMUX_THM4_100K_PU (PMK8350_SID << 8 | 0x47) +#define PMK8350_ADC7_AMUX_THM5_100K_PU (PMK8350_SID << 8 | 0x48) + +/* 400k pull-up3 */ +#define PMK8350_ADC7_AMUX_THM1_400K_PU (PMK8350_SID << 8 | 0x64) +#define PMK8350_ADC7_AMUX_THM2_400K_PU (PMK8350_SID << 8 | 0x65) +#define PMK8350_ADC7_AMUX_THM3_400K_PU (PMK8350_SID << 8 | 0x66) +#define PMK8350_ADC7_AMUX_THM4_400K_PU (PMK8350_SID << 8 | 0x67) +#define PMK8350_ADC7_AMUX_THM5_400K_PU (PMK8350_SID << 8 | 0x68) + +#endif /* _DT_BINDINGS_QCOM_SPMI_VADC_PMK8350_H */ diff --git a/include/dt-bindings/iio/qcom,spmi-adc7-pmr735a.h b/include/dt-bindings/iio/qcom,spmi-adc7-pmr735a.h new file mode 100644 index 0000000..d6df1b1 --- /dev/null +++ b/include/dt-bindings/iio/qcom,spmi-adc7-pmr735a.h @@ -0,0 +1,28 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (c) 2020 The Linux Foundation. All rights reserved. + */ + +#ifndef _DT_BINDINGS_QCOM_SPMI_VADC_PMR735A_H +#define _DT_BINDINGS_QCOM_SPMI_VADC_PMR735A_H + +#ifndef PMR735A_SID +#define PMR735A_SID 4 +#endif + +/* ADC channels for PMR735A_ADC for PMIC7 */ +#define PMR735A_ADC7_REF_GND (PMR735A_SID << 8 | 0x0) +#define PMR735A_ADC7_1P25VREF (PMR735A_SID << 8 | 0x01) +#define PMR735A_ADC7_VREF_VADC (PMR735A_SID << 8 | 0x02) +#define PMR735A_ADC7_DIE_TEMP (PMR735A_SID << 8 | 0x03) + +#define PMR735A_ADC7_GPIO1 (PMR735A_SID << 8 | 0x0a) +#define PMR735A_ADC7_GPIO2 (PMR735A_SID << 8 | 0x0b) +#define PMR735A_ADC7_GPIO3 (PMR735A_SID << 8 | 0x0c) + +/* 100k pull-up2 */ +#define PMR735A_ADC7_GPIO1_100K_PU (PMR735A_SID << 8 | 0x4a) +#define PMR735A_ADC7_GPIO2_100K_PU (PMR735A_SID << 8 | 0x4b) +#define PMR735A_ADC7_GPIO3_100K_PU (PMR735A_SID << 8 | 0x4c) + +#endif /* _DT_BINDINGS_QCOM_SPMI_VADC_PMR735A_H */ diff --git a/include/dt-bindings/iio/qcom,spmi-adc7-pmr735b.h b/include/dt-bindings/iio/qcom,spmi-adc7-pmr735b.h new file mode 100644 index 0000000..8da0e7d --- /dev/null +++ b/include/dt-bindings/iio/qcom,spmi-adc7-pmr735b.h @@ -0,0 +1,28 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (c) 2020 The Linux Foundation. All rights reserved. + */ + +#ifndef _DT_BINDINGS_QCOM_SPMI_VADC_PMR735B_H +#define _DT_BINDINGS_QCOM_SPMI_VADC_PMR735B_H + +#ifndef PMR735B_SID +#define PMR735B_SID 5 +#endif + +/* ADC channels for PMR735B_ADC for PMIC7 */ +#define PMR735B_ADC7_REF_GND (PMR735B_SID << 8 | 0x0) +#define PMR735B_ADC7_1P25VREF (PMR735B_SID << 8 | 0x01) +#define PMR735B_ADC7_VREF_VADC (PMR735B_SID << 8 | 0x02) +#define PMR735B_ADC7_DIE_TEMP (PMR735B_SID << 8 | 0x03) + +#define PMR735B_ADC7_GPIO1 (PMR735B_SID << 8 | 0x0a) +#define PMR735B_ADC7_GPIO2 (PMR735B_SID << 8 | 0x0b) +#define PMR735B_ADC7_GPIO3 (PMR735B_SID << 8 | 0x0c) + +/* 100k pull-up2 */ +#define PMR735B_ADC7_GPIO1_100K_PU (PMR735B_SID << 8 | 0x4a) +#define PMR735B_ADC7_GPIO2_100K_PU (PMR735B_SID << 8 | 0x4b) +#define PMR735B_ADC7_GPIO3_100K_PU (PMR735B_SID << 8 | 0x4c) + +#endif /* _DT_BINDINGS_QCOM_SPMI_VADC_PMR735B_H */ diff --git a/include/dt-bindings/iio/qcom,spmi-vadc.h b/include/dt-bindings/iio/qcom,spmi-vadc.h index 61d556d..08adfe2 100644 --- a/include/dt-bindings/iio/qcom,spmi-vadc.h +++ b/include/dt-bindings/iio/qcom,spmi-vadc.h @@ -1,6 +1,6 @@ /* SPDX-License-Identifier: GPL-2.0 */ /* - * Copyright (c) 2012-2014,2018 The Linux Foundation. All rights reserved. + * Copyright (c) 2012-2014,2018,2020 The Linux Foundation. All rights reserved. */ #ifndef _DT_BINDINGS_QCOM_SPMI_VADC_H @@ -221,4 +221,80 @@ #define ADC5_MAX_CHANNEL 0xc0 +/* ADC channels for ADC for PMIC7 */ + +#define ADC7_REF_GND 0x00 +#define ADC7_1P25VREF 0x01 +#define ADC7_VREF_VADC 0x02 +#define ADC7_DIE_TEMP 0x03 + +#define ADC7_AMUX_THM1 0x04 +#define ADC7_AMUX_THM2 0x05 +#define ADC7_AMUX_THM3 0x06 +#define ADC7_AMUX_THM4 0x07 +#define ADC7_AMUX_THM5 0x08 +#define ADC7_AMUX_THM6 0x09 +#define ADC7_GPIO1 0x0a +#define ADC7_GPIO2 0x0b +#define ADC7_GPIO3 0x0c +#define ADC7_GPIO4 0x0d + +#define ADC7_CHG_TEMP 0x10 +#define ADC7_USB_IN_V_16 0x11 +#define ADC7_VDC_16 0x12 +#define ADC7_CC1_ID 0x13 +#define ADC7_VREF_BAT_THERM 0x15 +#define ADC7_IIN_FB 0x17 + +/* 30k pull-up1 */ +#define ADC7_AMUX_THM1_30K_PU 0x24 +#define ADC7_AMUX_THM2_30K_PU 0x25 +#define ADC7_AMUX_THM3_30K_PU 0x26 +#define ADC7_AMUX_THM4_30K_PU 0x27 +#define ADC7_AMUX_THM5_30K_PU 0x28 +#define ADC7_AMUX_THM6_30K_PU 0x29 +#define ADC7_GPIO1_30K_PU 0x2a +#define ADC7_GPIO2_30K_PU 0x2b +#define ADC7_GPIO3_30K_PU 0x2c +#define ADC7_GPIO4_30K_PU 0x2d +#define ADC7_CC1_ID_30K_PU 0x33 + +/* 100k pull-up2 */ +#define ADC7_AMUX_THM1_100K_PU 0x44 +#define ADC7_AMUX_THM2_100K_PU 0x45 +#define ADC7_AMUX_THM3_100K_PU 0x46 +#define ADC7_AMUX_THM4_100K_PU 0x47 +#define ADC7_AMUX_THM5_100K_PU 0x48 +#define ADC7_AMUX_THM6_100K_PU 0x49 +#define ADC7_GPIO1_100K_PU 0x4a +#define ADC7_GPIO2_100K_PU 0x4b +#define ADC7_GPIO3_100K_PU 0x4c +#define ADC7_GPIO4_100K_PU 0x4d +#define ADC7_CC1_ID_100K_PU 0x53 + +/* 400k pull-up3 */ +#define ADC7_AMUX_THM1_400K_PU 0x64 +#define ADC7_AMUX_THM2_400K_PU 0x65 +#define ADC7_AMUX_THM3_400K_PU 0x66 +#define ADC7_AMUX_THM4_400K_PU 0x67 +#define ADC7_AMUX_THM5_400K_PU 0x68 +#define ADC7_AMUX_THM6_400K_PU 0x69 +#define ADC7_GPIO1_400K_PU 0x6a +#define ADC7_GPIO2_400K_PU 0x6b +#define ADC7_GPIO3_400K_PU 0x6c +#define ADC7_GPIO4_400K_PU 0x6d +#define ADC7_CC1_ID_400K_PU 0x73 + +/* 1/3 Divider */ +#define ADC7_GPIO1_DIV3 0x8a +#define ADC7_GPIO2_DIV3 0x8b +#define ADC7_GPIO3_DIV3 0x8c +#define ADC7_GPIO4_DIV3 0x8d + +#define ADC7_VPH_PWR 0x8e +#define ADC7_VBAT_SNS 0x8f + +#define ADC7_SBUx 0x94 +#define ADC7_VBAT_2S_MID 0x96 + #endif /* _DT_BINDINGS_QCOM_SPMI_VADC_H */