From patchwork Tue Jun 16 14:12:36 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Jacopo Mondi X-Patchwork-Id: 11607651 X-Patchwork-Delegate: kieran@bingham.xyz Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 55785618 for ; Tue, 16 Jun 2020 14:09:34 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 4600D20882 for ; Tue, 16 Jun 2020 14:09:34 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1729253AbgFPOJe (ORCPT ); Tue, 16 Jun 2020 10:09:34 -0400 Received: from relay4-d.mail.gandi.net ([217.70.183.196]:57339 "EHLO relay4-d.mail.gandi.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1728557AbgFPOJd (ORCPT ); Tue, 16 Jun 2020 10:09:33 -0400 X-Originating-IP: 93.34.118.233 Received: from uno.lan (93-34-118-233.ip49.fastwebnet.it [93.34.118.233]) (Authenticated sender: jacopo@jmondi.org) by relay4-d.mail.gandi.net (Postfix) with ESMTPSA id 2C2B5E000C; Tue, 16 Jun 2020 14:09:29 +0000 (UTC) From: Jacopo Mondi To: mchehab@kernel.org, hverkuil-cisco@xs4all.nl, sakari.ailus@linux.intel.com, laurent.pinchart@ideasonboard.com Cc: Jacopo Mondi , niklas.soderlund+renesas@ragnatech.se, kieran.bingham@ideasonboard.com, dave.stevenson@raspberrypi.com, hyun.kwon@xilinx.com, linux-media@vger.kernel.org, linux-renesas-soc@vger.kernel.org Subject: [PATCH v5 01/10] media: v4l2-subdev: Introduce [get|set]_mbus_config pad ops Date: Tue, 16 Jun 2020 16:12:36 +0200 Message-Id: <20200616141244.49407-2-jacopo+renesas@jmondi.org> X-Mailer: git-send-email 2.27.0 In-Reply-To: <20200616141244.49407-1-jacopo+renesas@jmondi.org> References: <20200616141244.49407-1-jacopo+renesas@jmondi.org> MIME-Version: 1.0 Sender: linux-renesas-soc-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-renesas-soc@vger.kernel.org Introduce two new pad operations to allow retrieving and configuring the media bus parameters on a subdevice pad. The newly introduced operations aims to replace the s/g_mbus_config video operations, which have been on their way for deprecation since a long time. Signed-off-by: Jacopo Mondi --- include/media/v4l2-subdev.h | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h index f7fe78a6f65a..d8b9d5735307 100644 --- a/include/media/v4l2-subdev.h +++ b/include/media/v4l2-subdev.h @@ -670,6 +670,29 @@ struct v4l2_subdev_pad_config { * * @set_frame_desc: set the low level media bus frame parameters, @fd array * may be adjusted by the subdev driver to device capabilities. + * + * @get_mbus_config: get the media bus configuration of a remote sub-device. + * The media bus configuration is usually retrieved from the + * firmware interface at sub-device probe time, immediately + * applied to the hardware and eventually adjusted by the + * driver. Remote sub-devices (usually video receivers) shall + * use this operation to query the transmitting end bus + * configuration in order to adjust their own one accordingly. + * Callers should make sure they get the most up-to-date as + * possible configuration from the remote end, likely calling + * this operation as close as possible to stream on time. The + * operation shall fail if the pad index it has been called on + * is not valid. + * + * @set_mbus_config: set the media bus configuration of a remote sub-device. + * This operations is intended to allow, in combination with + * the get_mbus_config operation, the negotiation of media bus + * configuration parameters between media sub-devices. The + * operation shall not fail if the requested configuration is + * not supported, but the driver shall update the content of + * the %config argument to reflect what has been actually + * applied to the hardware. The operation shall fail if the + * pad index it has been called on is not valid. */ struct v4l2_subdev_pad_ops { int (*init_cfg)(struct v4l2_subdev *sd, @@ -710,6 +733,10 @@ struct v4l2_subdev_pad_ops { struct v4l2_mbus_frame_desc *fd); int (*set_frame_desc)(struct v4l2_subdev *sd, unsigned int pad, struct v4l2_mbus_frame_desc *fd); + int (*get_mbus_config)(struct v4l2_subdev *sd, unsigned int pad, + struct v4l2_mbus_config *config); + int (*set_mbus_config)(struct v4l2_subdev *sd, unsigned int pad, + struct v4l2_mbus_config *config); }; /** From patchwork Tue Jun 16 14:12:37 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Jacopo Mondi X-Patchwork-Id: 11607657 X-Patchwork-Delegate: kieran@bingham.xyz Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 18EF2618 for ; Tue, 16 Jun 2020 14:09:39 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 069BE206F1 for ; Tue, 16 Jun 2020 14:09:39 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1729402AbgFPOJi (ORCPT ); Tue, 16 Jun 2020 10:09:38 -0400 Received: from relay4-d.mail.gandi.net ([217.70.183.196]:50419 "EHLO relay4-d.mail.gandi.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726606AbgFPOJi (ORCPT ); Tue, 16 Jun 2020 10:09:38 -0400 X-Originating-IP: 93.34.118.233 Received: from uno.lan (93-34-118-233.ip49.fastwebnet.it [93.34.118.233]) (Authenticated sender: jacopo@jmondi.org) by relay4-d.mail.gandi.net (Postfix) with ESMTPSA id C891EE0008; Tue, 16 Jun 2020 14:09:32 +0000 (UTC) From: Jacopo Mondi To: mchehab@kernel.org, hverkuil-cisco@xs4all.nl, sakari.ailus@linux.intel.com, laurent.pinchart@ideasonboard.com Cc: Jacopo Mondi , niklas.soderlund+renesas@ragnatech.se, kieran.bingham@ideasonboard.com, dave.stevenson@raspberrypi.com, hyun.kwon@xilinx.com, linux-media@vger.kernel.org, linux-renesas-soc@vger.kernel.org Subject: [PATCH v5 02/10] media: i2c: Use the new get_mbus_config pad op Date: Tue, 16 Jun 2020 16:12:37 +0200 Message-Id: <20200616141244.49407-3-jacopo+renesas@jmondi.org> X-Mailer: git-send-email 2.27.0 In-Reply-To: <20200616141244.49407-1-jacopo+renesas@jmondi.org> References: <20200616141244.49407-1-jacopo+renesas@jmondi.org> MIME-Version: 1.0 Sender: linux-renesas-soc-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-renesas-soc@vger.kernel.org Move the existing users of the g_mbus_config video operation to use the newly introduced get_mbus_config pad operations. All the ported drivers report a static media bus configuration and do no support s_mbus_config so the operation implementation has not changed. Bridge drivers needs to call the new pad operation and will receive an -ENOICTLCMD when calling the old g_mbus_config video operation Signed-off-by: Jacopo Mondi --- drivers/media/i2c/adv7180.c | 7 ++++--- drivers/media/i2c/ml86v7667.c | 7 ++++--- drivers/media/i2c/mt9m001.c | 7 ++++--- drivers/media/i2c/mt9m111.c | 7 ++++--- drivers/media/i2c/ov9640.c | 7 ++++--- drivers/media/i2c/tc358743.c | 7 ++++--- drivers/media/i2c/tvp5150.c | 7 ++++--- 7 files changed, 28 insertions(+), 21 deletions(-) diff --git a/drivers/media/i2c/adv7180.c b/drivers/media/i2c/adv7180.c index 00159daa6fcd..e8744efe3cf0 100644 --- a/drivers/media/i2c/adv7180.c +++ b/drivers/media/i2c/adv7180.c @@ -760,8 +760,9 @@ static int adv7180_init_cfg(struct v4l2_subdev *sd, return adv7180_set_pad_format(sd, cfg, &fmt); } -static int adv7180_g_mbus_config(struct v4l2_subdev *sd, - struct v4l2_mbus_config *cfg) +static int adv7180_get_mbus_config(struct v4l2_subdev *sd, + unsigned int pad, + struct v4l2_mbus_config *cfg) { struct adv7180_state *state = to_state(sd); @@ -852,7 +853,6 @@ static const struct v4l2_subdev_video_ops adv7180_video_ops = { .querystd = adv7180_querystd, .g_input_status = adv7180_g_input_status, .s_routing = adv7180_s_routing, - .g_mbus_config = adv7180_g_mbus_config, .g_pixelaspect = adv7180_g_pixelaspect, .g_tvnorms = adv7180_g_tvnorms, .s_stream = adv7180_s_stream, @@ -869,6 +869,7 @@ static const struct v4l2_subdev_pad_ops adv7180_pad_ops = { .enum_mbus_code = adv7180_enum_mbus_code, .set_fmt = adv7180_set_pad_format, .get_fmt = adv7180_get_pad_format, + .get_mbus_config = adv7180_get_mbus_config, }; static const struct v4l2_subdev_sensor_ops adv7180_sensor_ops = { diff --git a/drivers/media/i2c/ml86v7667.c b/drivers/media/i2c/ml86v7667.c index c444bd6a0658..ff212335326a 100644 --- a/drivers/media/i2c/ml86v7667.c +++ b/drivers/media/i2c/ml86v7667.c @@ -219,8 +219,9 @@ static int ml86v7667_fill_fmt(struct v4l2_subdev *sd, return 0; } -static int ml86v7667_g_mbus_config(struct v4l2_subdev *sd, - struct v4l2_mbus_config *cfg) +static int ml86v7667_get_mbus_config(struct v4l2_subdev *sd, + unsigned int pad, + struct v4l2_mbus_config *cfg) { cfg->flags = V4L2_MBUS_MASTER | V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_DATA_ACTIVE_HIGH; @@ -291,13 +292,13 @@ static const struct v4l2_subdev_video_ops ml86v7667_subdev_video_ops = { .s_std = ml86v7667_s_std, .querystd = ml86v7667_querystd, .g_input_status = ml86v7667_g_input_status, - .g_mbus_config = ml86v7667_g_mbus_config, }; static const struct v4l2_subdev_pad_ops ml86v7667_subdev_pad_ops = { .enum_mbus_code = ml86v7667_enum_mbus_code, .get_fmt = ml86v7667_fill_fmt, .set_fmt = ml86v7667_fill_fmt, + .get_mbus_config = ml86v7667_get_mbus_config, }; static const struct v4l2_subdev_core_ops ml86v7667_subdev_core_ops = { diff --git a/drivers/media/i2c/mt9m001.c b/drivers/media/i2c/mt9m001.c index 210ea76adb53..3b0ba8ed5233 100644 --- a/drivers/media/i2c/mt9m001.c +++ b/drivers/media/i2c/mt9m001.c @@ -689,8 +689,9 @@ static int mt9m001_enum_mbus_code(struct v4l2_subdev *sd, return 0; } -static int mt9m001_g_mbus_config(struct v4l2_subdev *sd, - struct v4l2_mbus_config *cfg) +static int mt9m001_get_mbus_config(struct v4l2_subdev *sd, + unsigned int pad, + struct v4l2_mbus_config *cfg) { /* MT9M001 has all capture_format parameters fixed */ cfg->flags = V4L2_MBUS_PCLK_SAMPLE_FALLING | @@ -703,7 +704,6 @@ static int mt9m001_g_mbus_config(struct v4l2_subdev *sd, static const struct v4l2_subdev_video_ops mt9m001_subdev_video_ops = { .s_stream = mt9m001_s_stream, - .g_mbus_config = mt9m001_g_mbus_config, }; static const struct v4l2_subdev_sensor_ops mt9m001_subdev_sensor_ops = { @@ -717,6 +717,7 @@ static const struct v4l2_subdev_pad_ops mt9m001_subdev_pad_ops = { .set_selection = mt9m001_set_selection, .get_fmt = mt9m001_get_fmt, .set_fmt = mt9m001_set_fmt, + .get_mbus_config = mt9m001_get_mbus_config, }; static const struct v4l2_subdev_ops mt9m001_subdev_ops = { diff --git a/drivers/media/i2c/mt9m111.c b/drivers/media/i2c/mt9m111.c index 17e8253f5748..69697386ffcd 100644 --- a/drivers/media/i2c/mt9m111.c +++ b/drivers/media/i2c/mt9m111.c @@ -1137,8 +1137,9 @@ static int mt9m111_init_cfg(struct v4l2_subdev *sd, return 0; } -static int mt9m111_g_mbus_config(struct v4l2_subdev *sd, - struct v4l2_mbus_config *cfg) +static int mt9m111_get_mbus_config(struct v4l2_subdev *sd, + unsigned int pad, + struct v4l2_mbus_config *cfg) { struct mt9m111 *mt9m111 = container_of(sd, struct mt9m111, subdev); @@ -1155,7 +1156,6 @@ static int mt9m111_g_mbus_config(struct v4l2_subdev *sd, } static const struct v4l2_subdev_video_ops mt9m111_subdev_video_ops = { - .g_mbus_config = mt9m111_g_mbus_config, .s_stream = mt9m111_s_stream, .g_frame_interval = mt9m111_g_frame_interval, .s_frame_interval = mt9m111_s_frame_interval, @@ -1168,6 +1168,7 @@ static const struct v4l2_subdev_pad_ops mt9m111_subdev_pad_ops = { .set_selection = mt9m111_set_selection, .get_fmt = mt9m111_get_fmt, .set_fmt = mt9m111_set_fmt, + .get_mbus_config = mt9m111_get_mbus_config, }; static const struct v4l2_subdev_ops mt9m111_subdev_ops = { diff --git a/drivers/media/i2c/ov9640.c b/drivers/media/i2c/ov9640.c index 482609665305..0ef5af026d09 100644 --- a/drivers/media/i2c/ov9640.c +++ b/drivers/media/i2c/ov9640.c @@ -648,8 +648,9 @@ static const struct v4l2_subdev_core_ops ov9640_core_ops = { }; /* Request bus settings on camera side */ -static int ov9640_g_mbus_config(struct v4l2_subdev *sd, - struct v4l2_mbus_config *cfg) +static int ov9640_get_mbus_config(struct v4l2_subdev *sd, + unsigned int pad, + struct v4l2_mbus_config *cfg) { cfg->flags = V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_MASTER | V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_HSYNC_ACTIVE_HIGH | @@ -661,13 +662,13 @@ static int ov9640_g_mbus_config(struct v4l2_subdev *sd, static const struct v4l2_subdev_video_ops ov9640_video_ops = { .s_stream = ov9640_s_stream, - .g_mbus_config = ov9640_g_mbus_config, }; static const struct v4l2_subdev_pad_ops ov9640_pad_ops = { .enum_mbus_code = ov9640_enum_mbus_code, .get_selection = ov9640_get_selection, .set_fmt = ov9640_set_fmt, + .get_mbus_config = ov9640_get_mbus_config, }; static const struct v4l2_subdev_ops ov9640_subdev_ops = { diff --git a/drivers/media/i2c/tc358743.c b/drivers/media/i2c/tc358743.c index dbbab75f135e..a03dcab5ce61 100644 --- a/drivers/media/i2c/tc358743.c +++ b/drivers/media/i2c/tc358743.c @@ -1602,8 +1602,9 @@ static int tc358743_dv_timings_cap(struct v4l2_subdev *sd, return 0; } -static int tc358743_g_mbus_config(struct v4l2_subdev *sd, - struct v4l2_mbus_config *cfg) +static int tc358743_get_mbus_config(struct v4l2_subdev *sd, + unsigned int pad, + struct v4l2_mbus_config *cfg) { struct tc358743_state *state = to_state(sd); @@ -1836,7 +1837,6 @@ static const struct v4l2_subdev_video_ops tc358743_video_ops = { .s_dv_timings = tc358743_s_dv_timings, .g_dv_timings = tc358743_g_dv_timings, .query_dv_timings = tc358743_query_dv_timings, - .g_mbus_config = tc358743_g_mbus_config, .s_stream = tc358743_s_stream, }; @@ -1848,6 +1848,7 @@ static const struct v4l2_subdev_pad_ops tc358743_pad_ops = { .set_edid = tc358743_s_edid, .enum_dv_timings = tc358743_enum_dv_timings, .dv_timings_cap = tc358743_dv_timings_cap, + .get_mbus_config = tc358743_get_mbus_config, }; static const struct v4l2_subdev_ops tc358743_ops = { diff --git a/drivers/media/i2c/tvp5150.c b/drivers/media/i2c/tvp5150.c index eb39cf5ea089..53b344a64983 100644 --- a/drivers/media/i2c/tvp5150.c +++ b/drivers/media/i2c/tvp5150.c @@ -1191,8 +1191,9 @@ static int tvp5150_get_selection(struct v4l2_subdev *sd, } } -static int tvp5150_g_mbus_config(struct v4l2_subdev *sd, - struct v4l2_mbus_config *cfg) +static int tvp5150_get_mbus_config(struct v4l2_subdev *sd, + unsigned int pad, + struct v4l2_mbus_config *cfg) { struct tvp5150 *decoder = to_tvp5150(sd); @@ -1719,7 +1720,6 @@ static const struct v4l2_subdev_video_ops tvp5150_video_ops = { .querystd = tvp5150_querystd, .s_stream = tvp5150_s_stream, .s_routing = tvp5150_s_routing, - .g_mbus_config = tvp5150_g_mbus_config, }; static const struct v4l2_subdev_vbi_ops tvp5150_vbi_ops = { @@ -1737,6 +1737,7 @@ static const struct v4l2_subdev_pad_ops tvp5150_pad_ops = { .get_fmt = tvp5150_fill_fmt, .get_selection = tvp5150_get_selection, .set_selection = tvp5150_set_selection, + .get_mbus_config = tvp5150_get_mbus_config, }; static const struct v4l2_subdev_ops tvp5150_ops = { From patchwork Tue Jun 16 14:12:38 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Jacopo Mondi X-Patchwork-Id: 11607673 X-Patchwork-Delegate: kieran@bingham.xyz Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id AAD86913 for ; Tue, 16 Jun 2020 14:09:55 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 9D8FE207D3 for ; Tue, 16 Jun 2020 14:09:55 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1729560AbgFPOJy (ORCPT ); Tue, 16 Jun 2020 10:09:54 -0400 Received: from relay4-d.mail.gandi.net ([217.70.183.196]:50719 "EHLO relay4-d.mail.gandi.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1729348AbgFPOJn (ORCPT ); Tue, 16 Jun 2020 10:09:43 -0400 X-Originating-IP: 93.34.118.233 Received: from uno.lan (93-34-118-233.ip49.fastwebnet.it [93.34.118.233]) (Authenticated sender: jacopo@jmondi.org) by relay4-d.mail.gandi.net (Postfix) with ESMTPSA id A031EE002D; Tue, 16 Jun 2020 14:09:36 +0000 (UTC) From: Jacopo Mondi To: mchehab@kernel.org, hverkuil-cisco@xs4all.nl, sakari.ailus@linux.intel.com, laurent.pinchart@ideasonboard.com Cc: Jacopo Mondi , niklas.soderlund+renesas@ragnatech.se, kieran.bingham@ideasonboard.com, dave.stevenson@raspberrypi.com, hyun.kwon@xilinx.com, linux-media@vger.kernel.org, linux-renesas-soc@vger.kernel.org Subject: [PATCH v5 03/10] media: i2c: ov6650: Use new [get|set]_mbus_config ops Date: Tue, 16 Jun 2020 16:12:38 +0200 Message-Id: <20200616141244.49407-4-jacopo+renesas@jmondi.org> X-Mailer: git-send-email 2.27.0 In-Reply-To: <20200616141244.49407-1-jacopo+renesas@jmondi.org> References: <20200616141244.49407-1-jacopo+renesas@jmondi.org> MIME-Version: 1.0 Sender: linux-renesas-soc-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-renesas-soc@vger.kernel.org Use the new get_mbus_config and set_mbus_config pad operations in place of the video operations currently in use. Compared to other drivers where the same conversion has been performed, ov6650 proved to be a bit more tricky, as the existing g_mbus_config implementation did not report the currently applied configuration but the set of all possible configuration options. Adapt the driver to support the semantic of the two newly introduced operations: - get_mbus_config reports the current media bus configuration - set_mbus_config applies only changes explicitly requested and updates the provided cfg parameter to report what has actually been applied to the hardware. Compile-tested only. Signed-off-by: Jacopo Mondi --- drivers/media/i2c/ov6650.c | 56 ++++++++++++++++++++++++++------------ 1 file changed, 39 insertions(+), 17 deletions(-) diff --git a/drivers/media/i2c/ov6650.c b/drivers/media/i2c/ov6650.c index 91906b94f978..d2e7a8556ed7 100644 --- a/drivers/media/i2c/ov6650.c +++ b/drivers/media/i2c/ov6650.c @@ -921,46 +921,68 @@ static const struct v4l2_subdev_core_ops ov6650_core_ops = { }; /* Request bus settings on camera side */ -static int ov6650_g_mbus_config(struct v4l2_subdev *sd, - struct v4l2_mbus_config *cfg) +static int ov6650_get_mbus_config(struct v4l2_subdev *sd, + unsigned int pad, + struct v4l2_mbus_config *cfg) { + struct i2c_client *client = v4l2_get_subdevdata(sd); + u8 comj, comf; + int ret; + + ret = ov6650_reg_read(client, REG_COMJ, &comj); + if (ret) + return ret; - cfg->flags = V4L2_MBUS_MASTER | - V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_PCLK_SAMPLE_FALLING | - V4L2_MBUS_HSYNC_ACTIVE_HIGH | V4L2_MBUS_HSYNC_ACTIVE_LOW | - V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_VSYNC_ACTIVE_LOW | - V4L2_MBUS_DATA_ACTIVE_HIGH; + ret = ov6650_reg_read(client, REG_COMF, &comf); + if (ret) + return ret; + + cfg->flags = V4L2_MBUS_MASTER + | ((comj & COMJ_VSYNC_HIGH) ? V4L2_MBUS_VSYNC_ACTIVE_HIGH + : V4L2_MBUS_VSYNC_ACTIVE_LOW) + | ((comf & COMF_HREF_LOW) ? V4L2_MBUS_HSYNC_ACTIVE_LOW + : V4L2_MBUS_HSYNC_ACTIVE_HIGH) + | ((comj & COMJ_PCLK_RISING) ? V4L2_MBUS_PCLK_SAMPLE_RISING + : V4L2_MBUS_PCLK_SAMPLE_FALLING); cfg->type = V4L2_MBUS_PARALLEL; return 0; } /* Alter bus settings on camera side */ -static int ov6650_s_mbus_config(struct v4l2_subdev *sd, - const struct v4l2_mbus_config *cfg) +static int ov6650_set_mbus_config(struct v4l2_subdev *sd, + unsigned int pad, + struct v4l2_mbus_config *cfg) { struct i2c_client *client = v4l2_get_subdevdata(sd); - int ret; + int ret = 0; if (cfg->flags & V4L2_MBUS_PCLK_SAMPLE_RISING) ret = ov6650_reg_rmw(client, REG_COMJ, COMJ_PCLK_RISING, 0); - else + else if (cfg->flags & V4L2_MBUS_PCLK_SAMPLE_FALLING) ret = ov6650_reg_rmw(client, REG_COMJ, 0, COMJ_PCLK_RISING); if (ret) - return ret; + goto error; if (cfg->flags & V4L2_MBUS_HSYNC_ACTIVE_LOW) ret = ov6650_reg_rmw(client, REG_COMF, COMF_HREF_LOW, 0); - else + else if (cfg->flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH) ret = ov6650_reg_rmw(client, REG_COMF, 0, COMF_HREF_LOW); if (ret) - return ret; + goto error; if (cfg->flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH) ret = ov6650_reg_rmw(client, REG_COMJ, COMJ_VSYNC_HIGH, 0); - else + else if (cfg->flags & V4L2_MBUS_VSYNC_ACTIVE_LOW) ret = ov6650_reg_rmw(client, REG_COMJ, 0, COMJ_VSYNC_HIGH); +error: + /* + * Update the configuration to report what is actually applied to + * the hardware. + */ + ov6650_get_mbus_config(sd, pad, cfg); + return ret; } @@ -968,8 +990,6 @@ static const struct v4l2_subdev_video_ops ov6650_video_ops = { .s_stream = ov6650_s_stream, .g_frame_interval = ov6650_g_frame_interval, .s_frame_interval = ov6650_s_frame_interval, - .g_mbus_config = ov6650_g_mbus_config, - .s_mbus_config = ov6650_s_mbus_config, }; static const struct v4l2_subdev_pad_ops ov6650_pad_ops = { @@ -978,6 +998,8 @@ static const struct v4l2_subdev_pad_ops ov6650_pad_ops = { .set_selection = ov6650_set_selection, .get_fmt = ov6650_get_fmt, .set_fmt = ov6650_set_fmt, + .get_mbus_config = ov6650_get_mbus_config, + .set_mbus_config = ov6650_set_mbus_config, }; static const struct v4l2_subdev_ops ov6650_subdev_ops = { From patchwork Tue Jun 16 14:12:39 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Jacopo Mondi X-Patchwork-Id: 11607661 X-Patchwork-Delegate: kieran@bingham.xyz Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id DE4CF92A for ; Tue, 16 Jun 2020 14:09:50 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id CCD8D2082F for ; Tue, 16 Jun 2020 14:09:50 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1729546AbgFPOJs (ORCPT ); Tue, 16 Jun 2020 10:09:48 -0400 Received: from relay4-d.mail.gandi.net ([217.70.183.196]:51609 "EHLO relay4-d.mail.gandi.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1729492AbgFPOJq (ORCPT ); Tue, 16 Jun 2020 10:09:46 -0400 X-Originating-IP: 93.34.118.233 Received: from uno.lan (93-34-118-233.ip49.fastwebnet.it [93.34.118.233]) (Authenticated sender: jacopo@jmondi.org) by relay4-d.mail.gandi.net (Postfix) with ESMTPSA id 54B07E000C; Tue, 16 Jun 2020 14:09:41 +0000 (UTC) From: Jacopo Mondi To: mchehab@kernel.org, hverkuil-cisco@xs4all.nl, sakari.ailus@linux.intel.com, laurent.pinchart@ideasonboard.com Cc: Jacopo Mondi , niklas.soderlund+renesas@ragnatech.se, kieran.bingham@ideasonboard.com, dave.stevenson@raspberrypi.com, hyun.kwon@xilinx.com, linux-media@vger.kernel.org, linux-renesas-soc@vger.kernel.org Subject: [PATCH v5 04/10] media: pxa_camera: Use the new set_mbus_config op Date: Tue, 16 Jun 2020 16:12:39 +0200 Message-Id: <20200616141244.49407-5-jacopo+renesas@jmondi.org> X-Mailer: git-send-email 2.27.0 In-Reply-To: <20200616141244.49407-1-jacopo+renesas@jmondi.org> References: <20200616141244.49407-1-jacopo+renesas@jmondi.org> MIME-Version: 1.0 Sender: linux-renesas-soc-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-renesas-soc@vger.kernel.org Move the PXA camera driver to use the new set_mbus_config pad operation. For this platform the change is not only cosmetic, as the pxa driver is currently the only driver in mainline to make use of the g_mbus_config and s_mbus_config video operations. The existing driver semantic is the following: - Collect all supported mbus config flags from the remote end - Match them with the supported PXA mbus configuration flags - If the remote subdevice allows multiple options for for VSYNC, HSYNC and PCLK polarity, use platform data requested settings The semantic of the new get_mbus_config and set_mbus_config differs from the corresponding video ops, particularly in the fact get_mbus_config reports the current mbus configuration and not the set of supported configuration options, with set_mbus_config always reporting the actual mbus configuration applied to the remote subdevice. Adapt the driver to perform the following - Set the remote subdevice mbus configuration according to the PXA platform data preferences. - If the applied configuration differs from the requested one (i.e. the remote subdevice does not allow changing one setting) make sure that - The remote end does not claim for DATA_ACTIVE_LOW, which seems not supported by the platform - The bus mastering roles match While at there remove a few checks performed on the media bus configuration at get_format() time as they do not belong there. Compile-tested only. Signed-off-by: Jacopo Mondi --- drivers/media/platform/pxa_camera.c | 189 ++++++++-------------------- 1 file changed, 51 insertions(+), 138 deletions(-) diff --git a/drivers/media/platform/pxa_camera.c b/drivers/media/platform/pxa_camera.c index 3c5fe737d36f..3a2cd28178da 100644 --- a/drivers/media/platform/pxa_camera.c +++ b/drivers/media/platform/pxa_camera.c @@ -605,42 +605,6 @@ static const struct pxa_mbus_pixelfmt *pxa_mbus_get_fmtdesc( return pxa_mbus_find_fmtdesc(code, mbus_fmt, ARRAY_SIZE(mbus_fmt)); } -static unsigned int pxa_mbus_config_compatible(const struct v4l2_mbus_config *cfg, - unsigned int flags) -{ - unsigned long common_flags; - bool hsync = true, vsync = true, pclk, data, mode; - bool mipi_lanes, mipi_clock; - - common_flags = cfg->flags & flags; - - switch (cfg->type) { - case V4L2_MBUS_PARALLEL: - hsync = common_flags & (V4L2_MBUS_HSYNC_ACTIVE_HIGH | - V4L2_MBUS_HSYNC_ACTIVE_LOW); - vsync = common_flags & (V4L2_MBUS_VSYNC_ACTIVE_HIGH | - V4L2_MBUS_VSYNC_ACTIVE_LOW); - /* fall through */ - case V4L2_MBUS_BT656: - pclk = common_flags & (V4L2_MBUS_PCLK_SAMPLE_RISING | - V4L2_MBUS_PCLK_SAMPLE_FALLING); - data = common_flags & (V4L2_MBUS_DATA_ACTIVE_HIGH | - V4L2_MBUS_DATA_ACTIVE_LOW); - mode = common_flags & (V4L2_MBUS_MASTER | V4L2_MBUS_SLAVE); - return (!hsync || !vsync || !pclk || !data || !mode) ? - 0 : common_flags; - case V4L2_MBUS_CSI2_DPHY: - mipi_lanes = common_flags & V4L2_MBUS_CSI2_LANES; - mipi_clock = common_flags & (V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK | - V4L2_MBUS_CSI2_CONTINUOUS_CLOCK); - return (!mipi_lanes || !mipi_clock) ? 0 : common_flags; - default: - WARN_ON(1); - return -EINVAL; - } - return 0; -} - /** * struct pxa_camera_format_xlate - match between host and sensor formats * @code: code of a sensor provided format @@ -1231,31 +1195,6 @@ static irqreturn_t pxa_camera_irq(int irq, void *data) return IRQ_HANDLED; } -static int test_platform_param(struct pxa_camera_dev *pcdev, - unsigned char buswidth, unsigned long *flags) -{ - /* - * Platform specified synchronization and pixel clock polarities are - * only a recommendation and are only used during probing. The PXA270 - * quick capture interface supports both. - */ - *flags = (pcdev->platform_flags & PXA_CAMERA_MASTER ? - V4L2_MBUS_MASTER : V4L2_MBUS_SLAVE) | - V4L2_MBUS_HSYNC_ACTIVE_HIGH | - V4L2_MBUS_HSYNC_ACTIVE_LOW | - V4L2_MBUS_VSYNC_ACTIVE_HIGH | - V4L2_MBUS_VSYNC_ACTIVE_LOW | - V4L2_MBUS_DATA_ACTIVE_HIGH | - V4L2_MBUS_PCLK_SAMPLE_RISING | - V4L2_MBUS_PCLK_SAMPLE_FALLING; - - /* If requested data width is supported by the platform, use it */ - if ((1 << (buswidth - 1)) & pcdev->width_flags) - return 0; - - return -EINVAL; -} - static void pxa_camera_setup_cicr(struct pxa_camera_dev *pcdev, unsigned long flags, __u32 pixfmt) { @@ -1598,99 +1537,78 @@ static int pxa_camera_init_videobuf2(struct pxa_camera_dev *pcdev) */ static int pxa_camera_set_bus_param(struct pxa_camera_dev *pcdev) { + unsigned int bus_width = pcdev->current_fmt->host_fmt->bits_per_sample; struct v4l2_mbus_config cfg = {.type = V4L2_MBUS_PARALLEL,}; u32 pixfmt = pcdev->current_fmt->host_fmt->fourcc; - unsigned long bus_flags, common_flags; + int mbus_config; int ret; - ret = test_platform_param(pcdev, - pcdev->current_fmt->host_fmt->bits_per_sample, - &bus_flags); - if (ret < 0) - return ret; - - ret = sensor_call(pcdev, video, g_mbus_config, &cfg); - if (!ret) { - common_flags = pxa_mbus_config_compatible(&cfg, - bus_flags); - if (!common_flags) { - dev_warn(pcdev_to_dev(pcdev), - "Flags incompatible: camera 0x%x, host 0x%lx\n", - cfg.flags, bus_flags); - return -EINVAL; - } - } else if (ret != -ENOIOCTLCMD) { - return ret; - } else { - common_flags = bus_flags; + if (!((1 << (bus_width - 1)) & pcdev->width_flags)) { + dev_err(pcdev_to_dev(pcdev), "Unsupported bus width %u", + bus_width); + return -EINVAL; } pcdev->channels = 1; /* Make choices, based on platform preferences */ - if ((common_flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH) && - (common_flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)) { - if (pcdev->platform_flags & PXA_CAMERA_HSP) - common_flags &= ~V4L2_MBUS_HSYNC_ACTIVE_HIGH; - else - common_flags &= ~V4L2_MBUS_HSYNC_ACTIVE_LOW; - } + mbus_config = 0; + if (pcdev->platform_flags & PXA_CAMERA_MASTER) + mbus_config |= V4L2_MBUS_MASTER; + else + mbus_config |= V4L2_MBUS_SLAVE; - if ((common_flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH) && - (common_flags & V4L2_MBUS_VSYNC_ACTIVE_LOW)) { - if (pcdev->platform_flags & PXA_CAMERA_VSP) - common_flags &= ~V4L2_MBUS_VSYNC_ACTIVE_HIGH; - else - common_flags &= ~V4L2_MBUS_VSYNC_ACTIVE_LOW; - } + if (pcdev->platform_flags & PXA_CAMERA_HSP) + mbus_config |= V4L2_MBUS_HSYNC_ACTIVE_HIGH; + else + mbus_config |= V4L2_MBUS_HSYNC_ACTIVE_LOW; - if ((common_flags & V4L2_MBUS_PCLK_SAMPLE_RISING) && - (common_flags & V4L2_MBUS_PCLK_SAMPLE_FALLING)) { - if (pcdev->platform_flags & PXA_CAMERA_PCP) - common_flags &= ~V4L2_MBUS_PCLK_SAMPLE_RISING; - else - common_flags &= ~V4L2_MBUS_PCLK_SAMPLE_FALLING; - } + if (pcdev->platform_flags & PXA_CAMERA_VSP) + mbus_config |= V4L2_MBUS_VSYNC_ACTIVE_HIGH; + else + mbus_config |= V4L2_MBUS_VSYNC_ACTIVE_LOW; - cfg.flags = common_flags; - ret = sensor_call(pcdev, video, s_mbus_config, &cfg); + if (pcdev->platform_flags & PXA_CAMERA_PCP) + mbus_config |= V4L2_MBUS_PCLK_SAMPLE_RISING; + else + mbus_config |= V4L2_MBUS_PCLK_SAMPLE_FALLING; + mbus_config |= V4L2_MBUS_DATA_ACTIVE_HIGH; + + cfg.flags = mbus_config; + ret = sensor_call(pcdev, pad, set_mbus_config, 0, &cfg); if (ret < 0 && ret != -ENOIOCTLCMD) { - dev_dbg(pcdev_to_dev(pcdev), - "camera s_mbus_config(0x%lx) returned %d\n", - common_flags, ret); + dev_err(pcdev_to_dev(pcdev), + "Failed to call set_mbus_config: %d\n", ret); return ret; } - pxa_camera_setup_cicr(pcdev, common_flags, pixfmt); - - return 0; -} - -static int pxa_camera_try_bus_param(struct pxa_camera_dev *pcdev, - unsigned char buswidth) -{ - struct v4l2_mbus_config cfg = {.type = V4L2_MBUS_PARALLEL,}; - unsigned long bus_flags, common_flags; - int ret = test_platform_param(pcdev, buswidth, &bus_flags); - - if (ret < 0) - return ret; + /* + * If the requested media bus configuration has not been fully applied + * make sure it is supported by the platform. + * + * PXA does not support V4L2_MBUS_DATA_ACTIVE_LOW and the bus mastering + * roles should match. + */ + if (cfg.flags != mbus_config) { + unsigned int pxa_mbus_role = mbus_config & (V4L2_MBUS_MASTER | + V4L2_MBUS_SLAVE); + if (pxa_mbus_role != (cfg.flags & (V4L2_MBUS_MASTER | + V4L2_MBUS_SLAVE))) { + dev_err(pcdev_to_dev(pcdev), + "Unsupported mbus configuration: bus mastering\n"); + return -EINVAL; + } - ret = sensor_call(pcdev, video, g_mbus_config, &cfg); - if (!ret) { - common_flags = pxa_mbus_config_compatible(&cfg, - bus_flags); - if (!common_flags) { - dev_warn(pcdev_to_dev(pcdev), - "Flags incompatible: camera 0x%x, host 0x%lx\n", - cfg.flags, bus_flags); + if (cfg.flags & V4L2_MBUS_DATA_ACTIVE_LOW) { + dev_err(pcdev_to_dev(pcdev), + "Unsupported mbus configuration: DATA_ACTIVE_LOW\n"); return -EINVAL; } - } else if (ret == -ENOIOCTLCMD) { - ret = 0; } - return ret; + pxa_camera_setup_cicr(pcdev, cfg.flags, pixfmt); + + return 0; } static const struct pxa_mbus_pixelfmt pxa_camera_formats[] = { @@ -1738,11 +1656,6 @@ static int pxa_camera_get_formats(struct v4l2_device *v4l2_dev, return 0; } - /* This also checks support for the requested bits-per-sample */ - ret = pxa_camera_try_bus_param(pcdev, fmt->bits_per_sample); - if (ret < 0) - return 0; - switch (code.code) { case MEDIA_BUS_FMT_UYVY8_2X8: formats++; From patchwork Tue Jun 16 14:12:40 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Jacopo Mondi X-Patchwork-Id: 11607659 X-Patchwork-Delegate: kieran@bingham.xyz Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id C7D98913 for ; Tue, 16 Jun 2020 14:09:50 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id B98CD206F1 for ; Tue, 16 Jun 2020 14:09:50 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1729492AbgFPOJt (ORCPT ); Tue, 16 Jun 2020 10:09:49 -0400 Received: from relay4-d.mail.gandi.net ([217.70.183.196]:35235 "EHLO relay4-d.mail.gandi.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1729050AbgFPOJr (ORCPT ); Tue, 16 Jun 2020 10:09:47 -0400 X-Originating-IP: 93.34.118.233 Received: from uno.lan (93-34-118-233.ip49.fastwebnet.it [93.34.118.233]) (Authenticated sender: jacopo@jmondi.org) by relay4-d.mail.gandi.net (Postfix) with ESMTPSA id E453AE0006; Tue, 16 Jun 2020 14:09:43 +0000 (UTC) From: Jacopo Mondi To: mchehab@kernel.org, hverkuil-cisco@xs4all.nl, sakari.ailus@linux.intel.com, laurent.pinchart@ideasonboard.com Cc: Jacopo Mondi , niklas.soderlund+renesas@ragnatech.se, kieran.bingham@ideasonboard.com, dave.stevenson@raspberrypi.com, hyun.kwon@xilinx.com, linux-media@vger.kernel.org, linux-renesas-soc@vger.kernel.org Subject: [PATCH v5 05/10] media: v4l2-subdev: Remove [s|g]_mbus_config video ops Date: Tue, 16 Jun 2020 16:12:40 +0200 Message-Id: <20200616141244.49407-6-jacopo+renesas@jmondi.org> X-Mailer: git-send-email 2.27.0 In-Reply-To: <20200616141244.49407-1-jacopo+renesas@jmondi.org> References: <20200616141244.49407-1-jacopo+renesas@jmondi.org> MIME-Version: 1.0 Sender: linux-renesas-soc-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-renesas-soc@vger.kernel.org With all sensor and platform drivers now converted to use the new get_mbus_config and set_mbus_config pad operations, remove the deprecated video operations g_mbus_config and s_mbus_config. Signed-off-by: Jacopo Mondi --- include/media/v4l2-subdev.h | 10 ---------- 1 file changed, 10 deletions(-) diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h index d8b9d5735307..98975248a033 100644 --- a/include/media/v4l2-subdev.h +++ b/include/media/v4l2-subdev.h @@ -402,12 +402,6 @@ struct v4l2_mbus_frame_desc { * * @query_dv_timings: callback for VIDIOC_QUERY_DV_TIMINGS() ioctl handler code. * - * @g_mbus_config: get supported mediabus configurations - * - * @s_mbus_config: set a certain mediabus configuration. This operation is added - * for compatibility with soc-camera drivers and should not be used by new - * software. - * * @s_rx_buffer: set a host allocated memory buffer for the subdev. The subdev * can adjust @size to a lower value and must not write more data to the * buffer starting at @data than the original value of @size. @@ -435,10 +429,6 @@ struct v4l2_subdev_video_ops { struct v4l2_dv_timings *timings); int (*query_dv_timings)(struct v4l2_subdev *sd, struct v4l2_dv_timings *timings); - int (*g_mbus_config)(struct v4l2_subdev *sd, - struct v4l2_mbus_config *cfg); - int (*s_mbus_config)(struct v4l2_subdev *sd, - const struct v4l2_mbus_config *cfg); int (*s_rx_buffer)(struct v4l2_subdev *sd, void *buf, unsigned int *size); }; From patchwork Tue Jun 16 14:12:41 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Jacopo Mondi X-Patchwork-Id: 11607667 X-Patchwork-Delegate: kieran@bingham.xyz Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 41140913 for ; Tue, 16 Jun 2020 14:09:52 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 32A11206F1 for ; Tue, 16 Jun 2020 14:09:52 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1729050AbgFPOJv (ORCPT ); Tue, 16 Jun 2020 10:09:51 -0400 Received: from relay4-d.mail.gandi.net ([217.70.183.196]:39783 "EHLO relay4-d.mail.gandi.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1729474AbgFPOJu (ORCPT ); Tue, 16 Jun 2020 10:09:50 -0400 X-Originating-IP: 93.34.118.233 Received: from uno.lan (93-34-118-233.ip49.fastwebnet.it [93.34.118.233]) (Authenticated sender: jacopo@jmondi.org) by relay4-d.mail.gandi.net (Postfix) with ESMTPSA id 8DB13E0017; Tue, 16 Jun 2020 14:09:46 +0000 (UTC) From: Jacopo Mondi To: mchehab@kernel.org, hverkuil-cisco@xs4all.nl, sakari.ailus@linux.intel.com, laurent.pinchart@ideasonboard.com Cc: Jacopo Mondi , niklas.soderlund+renesas@ragnatech.se, kieran.bingham@ideasonboard.com, dave.stevenson@raspberrypi.com, hyun.kwon@xilinx.com, linux-media@vger.kernel.org, linux-renesas-soc@vger.kernel.org Subject: [PATCH v5 06/10] staging: media: imx: Update TODO entry Date: Tue, 16 Jun 2020 16:12:41 +0200 Message-Id: <20200616141244.49407-7-jacopo+renesas@jmondi.org> X-Mailer: git-send-email 2.27.0 In-Reply-To: <20200616141244.49407-1-jacopo+renesas@jmondi.org> References: <20200616141244.49407-1-jacopo+renesas@jmondi.org> MIME-Version: 1.0 Sender: linux-renesas-soc-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-renesas-soc@vger.kernel.org Update the TODO entry that mentioned a potential use case for the now removed g_mbus_config video operation. Signed-off-by: Jacopo Mondi --- drivers/staging/media/imx/TODO | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/staging/media/imx/TODO b/drivers/staging/media/imx/TODO index a371cdedcdb0..9cfc1c1e78dc 100644 --- a/drivers/staging/media/imx/TODO +++ b/drivers/staging/media/imx/TODO @@ -10,6 +10,10 @@ driver uses the parsed DT bus config method until this issue is resolved. + 2020-06: g_mbus has been removed in favour of the get_mbus_config pad + operation which should be used to avoid parsing the remote endpoint + configuration. + - This media driver supports inheriting V4L2 controls to the video capture devices, from the subdevices in the capture device's pipeline. The controls for each capture device are updated in the From patchwork Tue Jun 16 14:12:42 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Jacopo Mondi X-Patchwork-Id: 11607679 X-Patchwork-Delegate: kieran@bingham.xyz Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id B00F692A for ; Tue, 16 Jun 2020 14:09:56 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id A1CE4207E8 for ; Tue, 16 Jun 2020 14:09:56 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1729556AbgFPOJy (ORCPT ); Tue, 16 Jun 2020 10:09:54 -0400 Received: from relay4-d.mail.gandi.net ([217.70.183.196]:42835 "EHLO relay4-d.mail.gandi.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1729554AbgFPOJx (ORCPT ); Tue, 16 Jun 2020 10:09:53 -0400 X-Originating-IP: 93.34.118.233 Received: from uno.lan (93-34-118-233.ip49.fastwebnet.it [93.34.118.233]) (Authenticated sender: jacopo@jmondi.org) by relay4-d.mail.gandi.net (Postfix) with ESMTPSA id CA149E0006; Tue, 16 Jun 2020 14:09:48 +0000 (UTC) From: Jacopo Mondi To: mchehab@kernel.org, hverkuil-cisco@xs4all.nl, sakari.ailus@linux.intel.com, laurent.pinchart@ideasonboard.com Cc: Jacopo Mondi , niklas.soderlund+renesas@ragnatech.se, kieran.bingham@ideasonboard.com, dave.stevenson@raspberrypi.com, hyun.kwon@xilinx.com, linux-media@vger.kernel.org, linux-renesas-soc@vger.kernel.org, Kieran Bingham Subject: [PATCH v5 07/10] media: i2c: adv748x: Adjust TXA data lanes number Date: Tue, 16 Jun 2020 16:12:42 +0200 Message-Id: <20200616141244.49407-8-jacopo+renesas@jmondi.org> X-Mailer: git-send-email 2.27.0 In-Reply-To: <20200616141244.49407-1-jacopo+renesas@jmondi.org> References: <20200616141244.49407-1-jacopo+renesas@jmondi.org> MIME-Version: 1.0 Sender: linux-renesas-soc-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-renesas-soc@vger.kernel.org When outputting SD-Core output through the TXA MIPI CSI-2 interface, the number of enabled data lanes should be reduced in order to guarantee that the two video formats produced by the SD-Core (480i and 576i) generate a MIPI CSI-2 link clock frequency compatible with the MIPI D-PHY specifications. Limit the number of enabled data lanes to 2, which is guaranteed to support 480i and 576i formats. Cache the number of enabled data lanes to be able to report it through the new get_mbus_config operation. Reviewed-by: Kieran Bingham Reviewed-by: Laurent Pinchart Reviewed-by: Niklas Söderlund Signed-off-by: Jacopo Mondi --- drivers/media/i2c/adv748x/adv748x-core.c | 31 ++++++++++++++++++------ drivers/media/i2c/adv748x/adv748x.h | 1 + 2 files changed, 25 insertions(+), 7 deletions(-) diff --git a/drivers/media/i2c/adv748x/adv748x-core.c b/drivers/media/i2c/adv748x/adv748x-core.c index 23e02ff27b17..1fe7f97c6d52 100644 --- a/drivers/media/i2c/adv748x/adv748x-core.c +++ b/drivers/media/i2c/adv748x/adv748x-core.c @@ -241,10 +241,10 @@ static int adv748x_power_up_tx(struct adv748x_csi2 *tx) int ret = 0; /* Enable n-lane MIPI */ - adv748x_write_check(state, page, 0x00, 0x80 | tx->num_lanes, &ret); + adv748x_write_check(state, page, 0x00, 0x80 | tx->active_lanes, &ret); /* Set Auto DPHY Timing */ - adv748x_write_check(state, page, 0x00, 0xa0 | tx->num_lanes, &ret); + adv748x_write_check(state, page, 0x00, 0xa0 | tx->active_lanes, &ret); /* ADI Required Write */ if (tx->src == &state->hdmi.sd) { @@ -270,7 +270,7 @@ static int adv748x_power_up_tx(struct adv748x_csi2 *tx) usleep_range(2000, 2500); /* Power-up CSI-TX */ - adv748x_write_check(state, page, 0x00, 0x20 | tx->num_lanes, &ret); + adv748x_write_check(state, page, 0x00, 0x20 | tx->active_lanes, &ret); usleep_range(1000, 1500); /* ADI Required Writes */ @@ -292,7 +292,7 @@ static int adv748x_power_down_tx(struct adv748x_csi2 *tx) adv748x_write_check(state, page, 0x1e, 0x00, &ret); /* Enable n-lane MIPI */ - adv748x_write_check(state, page, 0x00, 0x80 | tx->num_lanes, &ret); + adv748x_write_check(state, page, 0x00, 0x80 | tx->active_lanes, &ret); /* i2c_mipi_pll_en - 1'b1 */ adv748x_write_check(state, page, 0xda, 0x01, &ret); @@ -357,14 +357,29 @@ static int adv748x_link_setup(struct media_entity *entity, if (state->afe.tx) { /* AFE Requires TXA enabled, even when output to TXB */ io10 |= ADV748X_IO_10_CSI4_EN; - if (is_txa(tx)) + if (is_txa(tx)) { + /* + * Output from the SD-core (480i and 576i) from the TXA + * interface requires reducing the number of enabled + * data lanes in order to guarantee a valid link + * frequency. + */ + tx->active_lanes = min(tx->num_lanes, 2U); io10 |= ADV748X_IO_10_CSI4_IN_SEL_AFE; - else + } else { + /* TXB has a single data lane, no need to adjust. */ io10 |= ADV748X_IO_10_CSI1_EN; + } } - if (state->hdmi.tx) + if (state->hdmi.tx) { + /* + * Restore the number of active lanes, in case we have gone + * through an AFE->TXA streaming sessions. + */ + tx->active_lanes = tx->num_lanes; io10 |= ADV748X_IO_10_CSI4_EN; + } return io_clrset(state, ADV748X_IO_10, io10_mask, io10); } @@ -596,6 +611,7 @@ static int adv748x_parse_csi2_lanes(struct adv748x_state *state, } state->txa.num_lanes = num_lanes; + state->txa.active_lanes = num_lanes; adv_dbg(state, "TXA: using %u lanes\n", state->txa.num_lanes); } @@ -607,6 +623,7 @@ static int adv748x_parse_csi2_lanes(struct adv748x_state *state, } state->txb.num_lanes = num_lanes; + state->txb.active_lanes = num_lanes; adv_dbg(state, "TXB: using %u lanes\n", state->txb.num_lanes); } diff --git a/drivers/media/i2c/adv748x/adv748x.h b/drivers/media/i2c/adv748x/adv748x.h index fccb388ce179..1061f425ece5 100644 --- a/drivers/media/i2c/adv748x/adv748x.h +++ b/drivers/media/i2c/adv748x/adv748x.h @@ -79,6 +79,7 @@ struct adv748x_csi2 { unsigned int page; unsigned int port; unsigned int num_lanes; + unsigned int active_lanes; struct media_pad pads[ADV748X_CSI2_NR_PADS]; struct v4l2_ctrl_handler ctrl_hdl; From patchwork Tue Jun 16 14:12:43 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Jacopo Mondi X-Patchwork-Id: 11607685 X-Patchwork-Delegate: kieran@bingham.xyz Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id C1563913 for ; Tue, 16 Jun 2020 14:10:03 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id A6AA0207D3 for ; Tue, 16 Jun 2020 14:10:03 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1729576AbgFPOJ4 (ORCPT ); Tue, 16 Jun 2020 10:09:56 -0400 Received: from relay4-d.mail.gandi.net ([217.70.183.196]:40043 "EHLO relay4-d.mail.gandi.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1728947AbgFPOJz (ORCPT ); Tue, 16 Jun 2020 10:09:55 -0400 X-Originating-IP: 93.34.118.233 Received: from uno.lan (93-34-118-233.ip49.fastwebnet.it [93.34.118.233]) (Authenticated sender: jacopo@jmondi.org) by relay4-d.mail.gandi.net (Postfix) with ESMTPSA id 59354E0004; Tue, 16 Jun 2020 14:09:51 +0000 (UTC) From: Jacopo Mondi To: mchehab@kernel.org, hverkuil-cisco@xs4all.nl, sakari.ailus@linux.intel.com, laurent.pinchart@ideasonboard.com Cc: Jacopo Mondi , niklas.soderlund+renesas@ragnatech.se, kieran.bingham@ideasonboard.com, dave.stevenson@raspberrypi.com, hyun.kwon@xilinx.com, linux-media@vger.kernel.org, linux-renesas-soc@vger.kernel.org, Kieran Bingham Subject: [PATCH v5 08/10] media: i2c: adv748x: Implement get_mbus_config Date: Tue, 16 Jun 2020 16:12:43 +0200 Message-Id: <20200616141244.49407-9-jacopo+renesas@jmondi.org> X-Mailer: git-send-email 2.27.0 In-Reply-To: <20200616141244.49407-1-jacopo+renesas@jmondi.org> References: <20200616141244.49407-1-jacopo+renesas@jmondi.org> MIME-Version: 1.0 Sender: linux-renesas-soc-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-renesas-soc@vger.kernel.org Implement the newly introduced get_mbus_config operation to report the number of currently used data lanes on the MIPI CSI-2 interface. Reviewed-by: Kieran Bingham Reviewed-by: Niklas Söderlund Signed-off-by: Jacopo Mondi --- drivers/media/i2c/adv748x/adv748x-csi2.c | 31 ++++++++++++++++++++++++ 1 file changed, 31 insertions(+) diff --git a/drivers/media/i2c/adv748x/adv748x-csi2.c b/drivers/media/i2c/adv748x/adv748x-csi2.c index 2091cda50935..99bb63d05eef 100644 --- a/drivers/media/i2c/adv748x/adv748x-csi2.c +++ b/drivers/media/i2c/adv748x/adv748x-csi2.c @@ -214,9 +214,40 @@ static int adv748x_csi2_set_format(struct v4l2_subdev *sd, return ret; } +static int adv748x_csi2_get_mbus_config(struct v4l2_subdev *sd, unsigned int pad, + struct v4l2_mbus_config *config) +{ + struct adv748x_csi2 *tx = adv748x_sd_to_csi2(sd); + + if (pad != ADV748X_CSI2_SOURCE) + return -EINVAL; + + config->type = V4L2_MBUS_CSI2_DPHY; + switch (tx->active_lanes) { + case 1: + config->flags = V4L2_MBUS_CSI2_1_LANE; + break; + + case 2: + config->flags = V4L2_MBUS_CSI2_2_LANE; + break; + + case 3: + config->flags = V4L2_MBUS_CSI2_3_LANE; + break; + + case 4: + config->flags = V4L2_MBUS_CSI2_4_LANE; + break; + } + + return 0; +} + static const struct v4l2_subdev_pad_ops adv748x_csi2_pad_ops = { .get_fmt = adv748x_csi2_get_format, .set_fmt = adv748x_csi2_set_format, + .get_mbus_config = adv748x_csi2_get_mbus_config, }; /* ----------------------------------------------------------------------------- From patchwork Tue Jun 16 14:12:44 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Jacopo Mondi X-Patchwork-Id: 11607683 X-Patchwork-Delegate: kieran@bingham.xyz Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 70F21913 for ; Tue, 16 Jun 2020 14:10:02 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 5DB05207D3 for ; Tue, 16 Jun 2020 14:10:02 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1728869AbgFPOJ7 (ORCPT ); Tue, 16 Jun 2020 10:09:59 -0400 Received: from relay4-d.mail.gandi.net ([217.70.183.196]:56759 "EHLO relay4-d.mail.gandi.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1729586AbgFPOJ6 (ORCPT ); Tue, 16 Jun 2020 10:09:58 -0400 X-Originating-IP: 93.34.118.233 Received: from uno.lan (93-34-118-233.ip49.fastwebnet.it [93.34.118.233]) (Authenticated sender: jacopo@jmondi.org) by relay4-d.mail.gandi.net (Postfix) with ESMTPSA id 8025FE000B; Tue, 16 Jun 2020 14:09:54 +0000 (UTC) From: Jacopo Mondi To: mchehab@kernel.org, hverkuil-cisco@xs4all.nl, sakari.ailus@linux.intel.com, laurent.pinchart@ideasonboard.com Cc: Jacopo Mondi , niklas.soderlund+renesas@ragnatech.se, kieran.bingham@ideasonboard.com, dave.stevenson@raspberrypi.com, hyun.kwon@xilinx.com, linux-media@vger.kernel.org, linux-renesas-soc@vger.kernel.org Subject: [PATCH v5 09/10] media: rcar-csi2: Negotiate data lanes number Date: Tue, 16 Jun 2020 16:12:44 +0200 Message-Id: <20200616141244.49407-10-jacopo+renesas@jmondi.org> X-Mailer: git-send-email 2.27.0 In-Reply-To: <20200616141244.49407-1-jacopo+renesas@jmondi.org> References: <20200616141244.49407-1-jacopo+renesas@jmondi.org> MIME-Version: 1.0 Sender: linux-renesas-soc-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-renesas-soc@vger.kernel.org Use the newly introduced get_mbus_config() subdevice pad operation to retrieve the remote subdevice MIPI CSI-2 bus configuration and configure the number of active data lanes accordingly. In order to be able to call the remote subdevice operation cache the index of the remote pad connected to the single CSI-2 input port. Signed-off-by: Jacopo Mondi --- drivers/media/platform/rcar-vin/rcar-csi2.c | 74 +++++++++++++++++++-- 1 file changed, 67 insertions(+), 7 deletions(-) diff --git a/drivers/media/platform/rcar-vin/rcar-csi2.c b/drivers/media/platform/rcar-vin/rcar-csi2.c index 151e6a90c5fb..b3aee0860443 100644 --- a/drivers/media/platform/rcar-vin/rcar-csi2.c +++ b/drivers/media/platform/rcar-vin/rcar-csi2.c @@ -363,6 +363,7 @@ struct rcar_csi2 { struct v4l2_async_notifier notifier; struct v4l2_async_subdev asd; struct v4l2_subdev *remote; + unsigned int remote_pad; struct v4l2_mbus_framefmt mf; @@ -408,13 +409,14 @@ static void rcsi2_exit_standby(struct rcar_csi2 *priv) reset_control_deassert(priv->rstc); } -static int rcsi2_wait_phy_start(struct rcar_csi2 *priv) +static int rcsi2_wait_phy_start(struct rcar_csi2 *priv, + unsigned int active_lanes) { unsigned int timeout; /* Wait for the clock and data lanes to enter LP-11 state. */ for (timeout = 0; timeout <= 20; timeout++) { - const u32 lane_mask = (1 << priv->lanes) - 1; + const u32 lane_mask = (1 << active_lanes) - 1; if ((rcsi2_read(priv, PHCLM_REG) & PHCLM_STOPSTATECKL) && (rcsi2_read(priv, PHDLM_REG) & lane_mask) == lane_mask) @@ -446,7 +448,8 @@ static int rcsi2_set_phypll(struct rcar_csi2 *priv, unsigned int mbps) return 0; } -static int rcsi2_calc_mbps(struct rcar_csi2 *priv, unsigned int bpp) +static int rcsi2_calc_mbps(struct rcar_csi2 *priv, unsigned int bpp, + unsigned int active_lanes) { struct v4l2_subdev *source; struct v4l2_ctrl *ctrl; @@ -471,15 +474,63 @@ static int rcsi2_calc_mbps(struct rcar_csi2 *priv, unsigned int bpp) * bps = link_freq * 2 */ mbps = v4l2_ctrl_g_ctrl_int64(ctrl) * bpp; - do_div(mbps, priv->lanes * 1000000); + do_div(mbps, active_lanes * 1000000); return mbps; } +static int rcsi2_config_active_lanes(struct rcar_csi2 *priv, + unsigned int *active_lanes) +{ + struct v4l2_mbus_config mbus_config = { 0 }; + unsigned int num_lanes = (-1U); + int ret; + + *active_lanes = priv->lanes; + ret = v4l2_subdev_call(priv->remote, pad, get_mbus_config, + priv->remote_pad, &mbus_config); + if (ret == -ENOIOCTLCMD) { + dev_dbg(priv->dev, "No remote mbus configuration available\n"); + return 0; + } + + if (ret) { + dev_err(priv->dev, "Failed to get remote mbus configuration\n"); + return ret; + } + + if (mbus_config.type != V4L2_MBUS_CSI2_DPHY) { + dev_err(priv->dev, "Unsupported media bus type %u\n", + mbus_config.type); + return -EINVAL; + } + + if (mbus_config.flags & V4L2_MBUS_CSI2_1_LANE) + num_lanes = 1; + else if (mbus_config.flags & V4L2_MBUS_CSI2_2_LANE) + num_lanes = 2; + else if (mbus_config.flags & V4L2_MBUS_CSI2_3_LANE) + num_lanes = 3; + else if (mbus_config.flags & V4L2_MBUS_CSI2_4_LANE) + num_lanes = 4; + + if (num_lanes > priv->lanes) { + dev_err(priv->dev, + "Unsupported mbus config: too many data lanes %u\n", + num_lanes); + return -EINVAL; + } + + *active_lanes = num_lanes; + + return 0; +} + static int rcsi2_start_receiver(struct rcar_csi2 *priv) { const struct rcar_csi2_format *format; u32 phycnt, vcdt = 0, vcdt2 = 0, fld = 0; + unsigned int active_lanes; unsigned int i; int mbps, ret; @@ -521,10 +572,18 @@ static int rcsi2_start_receiver(struct rcar_csi2 *priv) fld |= FLD_FLD_NUM(1); } + /* + * Get the number of active data lanes inspecting the remote mbus + * configuration. + */ + ret = rcsi2_config_active_lanes(priv, &active_lanes); + if (ret) + return ret; + phycnt = PHYCNT_ENABLECLK; - phycnt |= (1 << priv->lanes) - 1; + phycnt |= (1 << active_lanes) - 1; - mbps = rcsi2_calc_mbps(priv, format->bpp); + mbps = rcsi2_calc_mbps(priv, format->bpp, active_lanes); if (mbps < 0) return mbps; @@ -571,7 +630,7 @@ static int rcsi2_start_receiver(struct rcar_csi2 *priv) rcsi2_write(priv, PHYCNT_REG, phycnt | PHYCNT_SHUTDOWNZ); rcsi2_write(priv, PHYCNT_REG, phycnt | PHYCNT_SHUTDOWNZ | PHYCNT_RSTZ); - ret = rcsi2_wait_phy_start(priv); + ret = rcsi2_wait_phy_start(priv, active_lanes); if (ret) return ret; @@ -748,6 +807,7 @@ static int rcsi2_notify_bound(struct v4l2_async_notifier *notifier, } priv->remote = subdev; + priv->remote_pad = pad; dev_dbg(priv->dev, "Bound %s pad: %d\n", subdev->name, pad);