From patchwork Wed Jun 17 06:55:38 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Geert Uytterhoeven X-Patchwork-Id: 11609133 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 0CBF960D for ; Wed, 17 Jun 2020 07:00:59 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id CC76A208C3 for ; Wed, 17 Jun 2020 07:00:58 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1725773AbgFQHA6 (ORCPT ); Wed, 17 Jun 2020 03:00:58 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:46124 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1725536AbgFQHAx (ORCPT ); Wed, 17 Jun 2020 03:00:53 -0400 X-Greylist: delayed 301 seconds by postgrey-1.37 at lindbergh.monkeyblade.net; Wed, 17 Jun 2020 00:00:52 PDT Received: from laurent.telenet-ops.be (laurent.telenet-ops.be [IPv6:2a02:1800:110:4::f00:19]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 24E4CC061573 for ; Wed, 17 Jun 2020 00:00:51 -0700 (PDT) Received: from ramsan ([IPv6:2a02:1810:ac12:ed20:b57b:2191:a081:571d]) by laurent.telenet-ops.be with bizsmtp id s6vm2200J1Jlgh2016vmGp; Wed, 17 Jun 2020 08:55:47 +0200 Received: from rox.of.borg ([192.168.97.57]) by ramsan with esmtp (Exim 4.90_1) (envelope-from ) id 1jlRz8-0007Mj-Dh; Wed, 17 Jun 2020 08:55:46 +0200 Received: from geert by rox.of.borg with local (Exim 4.90_1) (envelope-from ) id 1jlRz8-0006j4-Cb; Wed, 17 Jun 2020 08:55:46 +0200 From: Geert Uytterhoeven To: Yoshinori Sato , Rich Felker , Dmitry Torokhov , Arnd Bergmann Cc: linux-sh@vger.kernel.org, linux-input@vger.kernel.org, linux-kernel@vger.kernel.org, Geert Uytterhoeven Subject: [PATCH 1/2] sh: Remove SH5-based Cayman platform Date: Wed, 17 Jun 2020 08:55:38 +0200 Message-Id: <20200617065539.25805-2-geert+renesas@glider.be> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20200617065539.25805-1-geert+renesas@glider.be> References: <20200617065539.25805-1-geert+renesas@glider.be> Sender: linux-input-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-input@vger.kernel.org Since the removal of core support for SH5, Cayman support can no longer be selected. Fixes: 37744feebc086908 ("sh: remove sh5 support") Signed-off-by: Geert Uytterhoeven Acked-by: Arnd Bergmann --- arch/sh/Kconfig | 5 +- arch/sh/Makefile | 5 - arch/sh/boards/Kconfig | 6 - arch/sh/boards/mach-cayman/Makefile | 5 - arch/sh/boards/mach-cayman/irq.c | 148 ----------------------- arch/sh/boards/mach-cayman/panic.c | 46 ------- arch/sh/boards/mach-cayman/setup.c | 181 ---------------------------- arch/sh/configs/cayman_defconfig | 66 ---------- arch/sh/drivers/pci/Makefile | 1 - arch/sh/drivers/pci/fixups-cayman.c | 78 ------------ arch/sh/tools/mach-types | 1 - 11 files changed, 2 insertions(+), 540 deletions(-) delete mode 100644 arch/sh/boards/mach-cayman/Makefile delete mode 100644 arch/sh/boards/mach-cayman/irq.c delete mode 100644 arch/sh/boards/mach-cayman/panic.c delete mode 100644 arch/sh/boards/mach-cayman/setup.c delete mode 100644 arch/sh/configs/cayman_defconfig delete mode 100644 arch/sh/drivers/pci/fixups-cayman.c diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 9fc2b010e938c94a..d8b097cbb6ed182a 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -123,8 +123,8 @@ config ARCH_HAS_ILOG2_U64 config NO_IOPORT_MAP def_bool !PCI - depends on !SH_CAYMAN && !SH_SH4202_MICRODEV && !SH_SHMIN && \ - !SH_HP6XX && !SH_SOLUTION_ENGINE + depends on !SH_SH4202_MICRODEV && !SH_SHMIN && !SH_HP6XX && \ + !SH_SOLUTION_ENGINE config IO_TRAPPED bool @@ -726,7 +726,6 @@ config ZERO_PAGE_OFFSET config BOOT_LINK_OFFSET hex default "0x00210000" if SH_SHMIN - default "0x00400000" if SH_CAYMAN default "0x00810000" if SH_7780_SOLUTION_ENGINE default "0x009e0000" if SH_TITAN default "0x01800000" if SH_SDK7780 diff --git a/arch/sh/Makefile b/arch/sh/Makefile index da9cf952f33c1520..2faebfd72ecab5a4 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -15,11 +15,7 @@ ifneq ($(SUBARCH),$(ARCH)) endif endif -ifeq ($(ARCH),sh) KBUILD_DEFCONFIG := shx3_defconfig -else -KBUILD_DEFCONFIG := cayman_defconfig -endif isa-y := any isa-$(CONFIG_SH_DSP) := sh @@ -143,7 +139,6 @@ machdir-$(CONFIG_SH_SH7763RDP) += mach-sh7763rdp machdir-$(CONFIG_SH_SH4202_MICRODEV) += mach-microdev machdir-$(CONFIG_SH_LANDISK) += mach-landisk machdir-$(CONFIG_SH_LBOX_RE2) += mach-lboxre2 -machdir-$(CONFIG_SH_CAYMAN) += mach-cayman machdir-$(CONFIG_SH_RSK) += mach-rsk ifneq ($(machdir-y),) diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig index fb0ca0c1efe11dce..83bcb6d2dacadd4a 100644 --- a/arch/sh/boards/Kconfig +++ b/arch/sh/boards/Kconfig @@ -340,12 +340,6 @@ config SH_MAGIC_PANEL_R2 help Select Magic Panel R2 if configuring for Magic Panel R2. -config SH_CAYMAN - bool "Hitachi Cayman" - depends on CPU_SUBTYPE_SH5_101 || CPU_SUBTYPE_SH5_103 - select HAVE_PCI - select ARCH_MIGHT_HAVE_PC_SERIO - config SH_POLARIS bool "SMSC Polaris" select CPU_HAS_IPR_IRQ diff --git a/arch/sh/boards/mach-cayman/Makefile b/arch/sh/boards/mach-cayman/Makefile deleted file mode 100644 index 775a4be57434b6a4..0000000000000000 --- a/arch/sh/boards/mach-cayman/Makefile +++ /dev/null @@ -1,5 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -# -# Makefile for the Hitachi Cayman specific parts of the kernel -# -obj-y := setup.o irq.o panic.o diff --git a/arch/sh/boards/mach-cayman/irq.c b/arch/sh/boards/mach-cayman/irq.c deleted file mode 100644 index 0305d0b51730015d..0000000000000000 --- a/arch/sh/boards/mach-cayman/irq.c +++ /dev/null @@ -1,148 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * arch/sh/mach-cayman/irq.c - SH-5 Cayman Interrupt Support - * - * This file handles the board specific parts of the Cayman interrupt system - * - * Copyright (C) 2002 Stuart Menefy - */ -#include -#include -#include -#include -#include -#include - -/* Setup for the SMSC FDC37C935 / LAN91C100FD */ -#define SMSC_IRQ IRQ_IRL1 - -/* Setup for PCI Bus 2, which transmits interrupts via the EPLD */ -#define PCI2_IRQ IRQ_IRL3 - -unsigned long epld_virt; - -#define EPLD_BASE 0x04002000 -#define EPLD_STATUS_BASE (epld_virt + 0x10) -#define EPLD_MASK_BASE (epld_virt + 0x20) - -/* Note the SMSC SuperIO chip and SMSC LAN chip interrupts are all muxed onto - the same SH-5 interrupt */ - -static irqreturn_t cayman_interrupt_smsc(int irq, void *dev_id) -{ - printk(KERN_INFO "CAYMAN: spurious SMSC interrupt\n"); - return IRQ_NONE; -} - -static irqreturn_t cayman_interrupt_pci2(int irq, void *dev_id) -{ - printk(KERN_INFO "CAYMAN: spurious PCI interrupt, IRQ %d\n", irq); - return IRQ_NONE; -} - -static void enable_cayman_irq(struct irq_data *data) -{ - unsigned int irq = data->irq; - unsigned long flags; - unsigned long mask; - unsigned int reg; - unsigned char bit; - - irq -= START_EXT_IRQS; - reg = EPLD_MASK_BASE + ((irq / 8) << 2); - bit = 1<<(irq % 8); - local_irq_save(flags); - mask = __raw_readl(reg); - mask |= bit; - __raw_writel(mask, reg); - local_irq_restore(flags); -} - -static void disable_cayman_irq(struct irq_data *data) -{ - unsigned int irq = data->irq; - unsigned long flags; - unsigned long mask; - unsigned int reg; - unsigned char bit; - - irq -= START_EXT_IRQS; - reg = EPLD_MASK_BASE + ((irq / 8) << 2); - bit = 1<<(irq % 8); - local_irq_save(flags); - mask = __raw_readl(reg); - mask &= ~bit; - __raw_writel(mask, reg); - local_irq_restore(flags); -} - -struct irq_chip cayman_irq_type = { - .name = "Cayman-IRQ", - .irq_unmask = enable_cayman_irq, - .irq_mask = disable_cayman_irq, -}; - -int cayman_irq_demux(int evt) -{ - int irq = intc_evt_to_irq[evt]; - - if (irq == SMSC_IRQ) { - unsigned long status; - int i; - - status = __raw_readl(EPLD_STATUS_BASE) & - __raw_readl(EPLD_MASK_BASE) & 0xff; - if (status == 0) { - irq = -1; - } else { - for (i=0; i<8; i++) { - if (status & (1< -#include -#include - -/* THIS IS A PHYSICAL ADDRESS */ -#define HDSP2534_ADDR (0x04002100) - -static void poor_mans_delay(void) -{ - int i; - - for (i = 0; i < 2500000; i++) - cpu_relax(); -} - -static void show_value(unsigned long x) -{ - int i; - unsigned nibble; - for (i = 0; i < 8; i++) { - nibble = ((x >> (i * 4)) & 0xf); - - __raw_writeb(nibble + ((nibble > 9) ? 55 : 48), - HDSP2534_ADDR + 0xe0 + ((7 - i) << 2)); - } -} - -void -panic_handler(unsigned long panicPC, unsigned long panicSSR, - unsigned long panicEXPEVT) -{ - while (1) { - /* This piece of code displays the PC on the LED display */ - show_value(panicPC); - poor_mans_delay(); - show_value(panicSSR); - poor_mans_delay(); - show_value(panicEXPEVT); - poor_mans_delay(); - } -} diff --git a/arch/sh/boards/mach-cayman/setup.c b/arch/sh/boards/mach-cayman/setup.c deleted file mode 100644 index 8ef76e288da00cbf..0000000000000000 --- a/arch/sh/boards/mach-cayman/setup.c +++ /dev/null @@ -1,181 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * arch/sh/mach-cayman/setup.c - * - * SH5 Cayman support - * - * Copyright (C) 2002 David J. Mckay & Benedict Gaster - * Copyright (C) 2003 - 2007 Paul Mundt - */ -#include -#include -#include -#include - -/* - * Platform Dependent Interrupt Priorities. - */ - -/* Using defaults defined in irq.h */ -#define RES NO_PRIORITY /* Disabled */ -#define IR0 IRL0_PRIORITY /* IRLs */ -#define IR1 IRL1_PRIORITY -#define IR2 IRL2_PRIORITY -#define IR3 IRL3_PRIORITY -#define PCA INTA_PRIORITY /* PCI Ints */ -#define PCB INTB_PRIORITY -#define PCC INTC_PRIORITY -#define PCD INTD_PRIORITY -#define SER TOP_PRIORITY -#define ERR TOP_PRIORITY -#define PW0 TOP_PRIORITY -#define PW1 TOP_PRIORITY -#define PW2 TOP_PRIORITY -#define PW3 TOP_PRIORITY -#define DM0 NO_PRIORITY /* DMA Ints */ -#define DM1 NO_PRIORITY -#define DM2 NO_PRIORITY -#define DM3 NO_PRIORITY -#define DAE NO_PRIORITY -#define TU0 TIMER_PRIORITY /* TMU Ints */ -#define TU1 NO_PRIORITY -#define TU2 NO_PRIORITY -#define TI2 NO_PRIORITY -#define ATI NO_PRIORITY /* RTC Ints */ -#define PRI NO_PRIORITY -#define CUI RTC_PRIORITY -#define ERI SCIF_PRIORITY /* SCIF Ints */ -#define RXI SCIF_PRIORITY -#define BRI SCIF_PRIORITY -#define TXI SCIF_PRIORITY -#define ITI TOP_PRIORITY /* WDT Ints */ - -/* Setup for the SMSC FDC37C935 */ -#define SMSC_SUPERIO_BASE 0x04000000 -#define SMSC_CONFIG_PORT_ADDR 0x3f0 -#define SMSC_INDEX_PORT_ADDR SMSC_CONFIG_PORT_ADDR -#define SMSC_DATA_PORT_ADDR 0x3f1 - -#define SMSC_ENTER_CONFIG_KEY 0x55 -#define SMSC_EXIT_CONFIG_KEY 0xaa - -#define SMCS_LOGICAL_DEV_INDEX 0x07 -#define SMSC_DEVICE_ID_INDEX 0x20 -#define SMSC_DEVICE_REV_INDEX 0x21 -#define SMSC_ACTIVATE_INDEX 0x30 -#define SMSC_PRIMARY_BASE_INDEX 0x60 -#define SMSC_SECONDARY_BASE_INDEX 0x62 -#define SMSC_PRIMARY_INT_INDEX 0x70 -#define SMSC_SECONDARY_INT_INDEX 0x72 - -#define SMSC_IDE1_DEVICE 1 -#define SMSC_KEYBOARD_DEVICE 7 -#define SMSC_CONFIG_REGISTERS 8 - -#define SMSC_SUPERIO_READ_INDEXED(index) ({ \ - outb((index), SMSC_INDEX_PORT_ADDR); \ - inb(SMSC_DATA_PORT_ADDR); }) -#define SMSC_SUPERIO_WRITE_INDEXED(val, index) ({ \ - outb((index), SMSC_INDEX_PORT_ADDR); \ - outb((val), SMSC_DATA_PORT_ADDR); }) - -#define IDE1_PRIMARY_BASE 0x01f0 -#define IDE1_SECONDARY_BASE 0x03f6 - -unsigned long smsc_superio_virt; - -int platform_int_priority[NR_INTC_IRQS] = { - IR0, IR1, IR2, IR3, PCA, PCB, PCC, PCD, /* IRQ 0- 7 */ - RES, RES, RES, RES, SER, ERR, PW3, PW2, /* IRQ 8-15 */ - PW1, PW0, DM0, DM1, DM2, DM3, DAE, RES, /* IRQ 16-23 */ - RES, RES, RES, RES, RES, RES, RES, RES, /* IRQ 24-31 */ - TU0, TU1, TU2, TI2, ATI, PRI, CUI, ERI, /* IRQ 32-39 */ - RXI, BRI, TXI, RES, RES, RES, RES, RES, /* IRQ 40-47 */ - RES, RES, RES, RES, RES, RES, RES, RES, /* IRQ 48-55 */ - RES, RES, RES, RES, RES, RES, RES, ITI, /* IRQ 56-63 */ -}; - -static int __init smsc_superio_setup(void) -{ - unsigned char devid, devrev; - - smsc_superio_virt = (unsigned long)ioremap(SMSC_SUPERIO_BASE, 1024); - if (!smsc_superio_virt) { - panic("Unable to remap SMSC SuperIO\n"); - } - - /* Initially the chip is in run state */ - /* Put it into configuration state */ - outb(SMSC_ENTER_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR); - outb(SMSC_ENTER_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR); - - /* Read device ID info */ - devid = SMSC_SUPERIO_READ_INDEXED(SMSC_DEVICE_ID_INDEX); - devrev = SMSC_SUPERIO_READ_INDEXED(SMSC_DEVICE_REV_INDEX); - printk("SMSC SuperIO devid %02x rev %02x\n", devid, devrev); - - /* Select the keyboard device */ - SMSC_SUPERIO_WRITE_INDEXED(SMSC_KEYBOARD_DEVICE, SMCS_LOGICAL_DEV_INDEX); - - /* enable it */ - SMSC_SUPERIO_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX); - - /* Select the interrupts */ - /* On a PC keyboard is IRQ1, mouse is IRQ12 */ - SMSC_SUPERIO_WRITE_INDEXED(1, SMSC_PRIMARY_INT_INDEX); - SMSC_SUPERIO_WRITE_INDEXED(12, SMSC_SECONDARY_INT_INDEX); - - /* - * Only IDE1 exists on the Cayman - */ - - /* Power it on */ - SMSC_SUPERIO_WRITE_INDEXED(1 << SMSC_IDE1_DEVICE, 0x22); - - SMSC_SUPERIO_WRITE_INDEXED(SMSC_IDE1_DEVICE, SMCS_LOGICAL_DEV_INDEX); - SMSC_SUPERIO_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX); - - SMSC_SUPERIO_WRITE_INDEXED(IDE1_PRIMARY_BASE >> 8, - SMSC_PRIMARY_BASE_INDEX + 0); - SMSC_SUPERIO_WRITE_INDEXED(IDE1_PRIMARY_BASE & 0xff, - SMSC_PRIMARY_BASE_INDEX + 1); - - SMSC_SUPERIO_WRITE_INDEXED(IDE1_SECONDARY_BASE >> 8, - SMSC_SECONDARY_BASE_INDEX + 0); - SMSC_SUPERIO_WRITE_INDEXED(IDE1_SECONDARY_BASE & 0xff, - SMSC_SECONDARY_BASE_INDEX + 1); - - SMSC_SUPERIO_WRITE_INDEXED(14, SMSC_PRIMARY_INT_INDEX); - - SMSC_SUPERIO_WRITE_INDEXED(SMSC_CONFIG_REGISTERS, - SMCS_LOGICAL_DEV_INDEX); - - SMSC_SUPERIO_WRITE_INDEXED(0x00, 0xc2); /* GP42 = nIDE1_OE */ - SMSC_SUPERIO_WRITE_INDEXED(0x01, 0xc5); /* GP45 = IDE1_IRQ */ - SMSC_SUPERIO_WRITE_INDEXED(0x00, 0xc6); /* GP46 = nIOROP */ - SMSC_SUPERIO_WRITE_INDEXED(0x00, 0xc7); /* GP47 = nIOWOP */ - - /* Exit the configuration state */ - outb(SMSC_EXIT_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR); - - return 0; -} -device_initcall(smsc_superio_setup); - -static void __iomem *cayman_ioport_map(unsigned long port, unsigned int len) -{ - if (port < 0x400) { - extern unsigned long smsc_superio_virt; - return (void __iomem *)((port << 2) | smsc_superio_virt); - } - - return (void __iomem *)port; -} - -extern void init_cayman_irq(void); - -static struct sh_machine_vector mv_cayman __initmv = { - .mv_name = "Hitachi Cayman", - .mv_ioport_map = cayman_ioport_map, - .mv_init_irq = init_cayman_irq, -}; diff --git a/arch/sh/configs/cayman_defconfig b/arch/sh/configs/cayman_defconfig deleted file mode 100644 index 911437c163c76af5..0000000000000000 --- a/arch/sh/configs/cayman_defconfig +++ /dev/null @@ -1,66 +0,0 @@ -CONFIG_POSIX_MQUEUE=y -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_FORCE_MAX_ZONEORDER=11 -CONFIG_MEMORY_START=0x80000000 -CONFIG_MEMORY_SIZE=0x00400000 -CONFIG_FLATMEM_MANUAL=y -CONFIG_CACHE_OFF=y -CONFIG_SH_PCLK_FREQ=50000000 -CONFIG_HEARTBEAT=y -CONFIG_PREEMPT=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -# CONFIG_IPV6 is not set -# CONFIG_FW_LOADER is not set -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SCSI_MULTI_LUN=y -CONFIG_SCSI_SPI_ATTRS=y -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_HW_RANDOM=y -CONFIG_I2C=m -CONFIG_WATCHDOG=y -CONFIG_FB=y -CONFIG_FIRMWARE_EDID=y -CONFIG_FB_MODE_HELPERS=y -CONFIG_FB_SH_MOBILE_LCDC=m -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_FONTS=y -CONFIG_FONT_8x16=y -CONFIG_LOGO=y -# CONFIG_LOGO_LINUX_MONO is not set -# CONFIG_LOGO_LINUX_VGA16 is not set -# CONFIG_LOGO_LINUX_CLUT224 is not set -# CONFIG_LOGO_SUPERH_MONO is not set -# CONFIG_LOGO_SUPERH_VGA16 is not set -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set -CONFIG_MINIX_FS=y -CONFIG_ROMFS_FS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_ROOT_NFS=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_FS=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DETECT_HUNG_TASK=y -CONFIG_SCHEDSTATS=y -CONFIG_FRAME_POINTER=y -# CONFIG_CRYPTO_ANSI_CPRNG is not set diff --git a/arch/sh/drivers/pci/Makefile b/arch/sh/drivers/pci/Makefile index a5c1e9066f831481..d313fd3ce7091e03 100644 --- a/arch/sh/drivers/pci/Makefile +++ b/arch/sh/drivers/pci/Makefile @@ -25,4 +25,3 @@ obj-$(CONFIG_SH_7780_SOLUTION_ENGINE) += fixups-sdk7780.o obj-$(CONFIG_SH_TITAN) += fixups-titan.o obj-$(CONFIG_SH_LANDISK) += fixups-landisk.o obj-$(CONFIG_SH_LBOX_RE2) += fixups-rts7751r2d.o -obj-$(CONFIG_SH_CAYMAN) += fixups-cayman.o diff --git a/arch/sh/drivers/pci/fixups-cayman.c b/arch/sh/drivers/pci/fixups-cayman.c deleted file mode 100644 index c797bfbe2e983c60..0000000000000000 --- a/arch/sh/drivers/pci/fixups-cayman.c +++ /dev/null @@ -1,78 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -#include -#include -#include -#include -#include -#include "pci-sh5.h" - -int pcibios_map_platform_irq(const struct pci_dev *dev, u8 slot, u8 pin) -{ - int result = -1; - - /* The complication here is that the PCI IRQ lines from the Cayman's 2 - 5V slots get into the CPU via a different path from the IRQ lines - from the 3 3.3V slots. Thus, we have to detect whether the card's - interrupts go via the 5V or 3.3V path, i.e. the 'bridge swizzling' - at the point where we cross from 5V to 3.3V is not the normal case. - - The added complication is that we don't know that the 5V slots are - always bus 2, because a card containing a PCI-PCI bridge may be - plugged into a 3.3V slot, and this changes the bus numbering. - - Also, the Cayman has an intermediate PCI bus that goes a custom - expansion board header (and to the secondary bridge). This bus has - never been used in practice. - - The 1ary onboard PCI-PCI bridge is device 3 on bus 0 - The 2ary onboard PCI-PCI bridge is device 0 on the 2ary bus of - the 1ary bridge. - */ - - struct slot_pin { - int slot; - int pin; - } path[4]; - int i=0; - - while (dev->bus->number > 0) { - - slot = path[i].slot = PCI_SLOT(dev->devfn); - pin = path[i].pin = pci_swizzle_interrupt_pin(dev, pin); - dev = dev->bus->self; - i++; - if (i > 3) panic("PCI path to root bus too long!\n"); - } - - slot = PCI_SLOT(dev->devfn); - /* This is the slot on bus 0 through which the device is eventually - reachable. */ - - /* Now work back up. */ - if ((slot < 3) || (i == 0)) { - /* Bus 0 (incl. PCI-PCI bridge itself) : perform the final - swizzle now. */ - result = IRQ_INTA + pci_swizzle_interrupt_pin(dev, pin) - 1; - } else { - i--; - slot = path[i].slot; - pin = path[i].pin; - if (slot > 0) { - panic("PCI expansion bus device found - not handled!\n"); - } else { - if (i > 0) { - /* 5V slots */ - i--; - slot = path[i].slot; - pin = path[i].pin; - /* 'pin' was swizzled earlier wrt slot, don't do it again. */ - result = IRQ_P2INTA + (pin - 1); - } else { - /* IRQ for 2ary PCI-PCI bridge : unused */ - result = -1; - } - } - } - - return result; -} diff --git a/arch/sh/tools/mach-types b/arch/sh/tools/mach-types index 569977e52c91dbac..29e648855d509f6a 100644 --- a/arch/sh/tools/mach-types +++ b/arch/sh/tools/mach-types @@ -46,7 +46,6 @@ X3PROTO SH_X3PROTO MAGICPANELR2 SH_MAGIC_PANEL_R2 R2D_PLUS RTS7751R2D_PLUS R2D_1 RTS7751R2D_1 -CAYMAN SH_CAYMAN SDK7780 SH_SDK7780 MIGOR SH_MIGOR RSK7201 SH_RSK7201 From patchwork Wed Jun 17 06:55:39 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Geert Uytterhoeven X-Patchwork-Id: 11609121 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id A27C9912 for ; Wed, 17 Jun 2020 06:55:51 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 898AD20739 for ; Wed, 17 Jun 2020 06:55:51 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726662AbgFQGzv (ORCPT ); Wed, 17 Jun 2020 02:55:51 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:45324 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1725554AbgFQGzu (ORCPT ); Wed, 17 Jun 2020 02:55:50 -0400 Received: from michel.telenet-ops.be (michel.telenet-ops.be [IPv6:2a02:1800:110:4::f00:18]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 548D0C061573 for ; Tue, 16 Jun 2020 23:55:50 -0700 (PDT) Received: from ramsan ([IPv6:2a02:1810:ac12:ed20:b57b:2191:a081:571d]) by michel.telenet-ops.be with bizsmtp id s6vm2200L1Jlgh2066vmnJ; Wed, 17 Jun 2020 08:55:47 +0200 Received: from rox.of.borg ([192.168.97.57]) by ramsan with esmtp (Exim 4.90_1) (envelope-from ) id 1jlRz8-0007Mk-EN; Wed, 17 Jun 2020 08:55:46 +0200 Received: from geert by rox.of.borg with local (Exim 4.90_1) (envelope-from ) id 1jlRz8-0006j6-DG; Wed, 17 Jun 2020 08:55:46 +0200 From: Geert Uytterhoeven To: Yoshinori Sato , Rich Felker , Dmitry Torokhov , Arnd Bergmann Cc: linux-sh@vger.kernel.org, linux-input@vger.kernel.org, linux-kernel@vger.kernel.org, Geert Uytterhoeven Subject: [PATCH 2/2] input: i8042 - Remove special Cayman handling Date: Wed, 17 Jun 2020 08:55:39 +0200 Message-Id: <20200617065539.25805-3-geert+renesas@glider.be> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20200617065539.25805-1-geert+renesas@glider.be> References: <20200617065539.25805-1-geert+renesas@glider.be> Sender: linux-input-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-input@vger.kernel.org As of commit 37744feebc086908 ("sh: remove sh5 support"), support for the SH5-based Cayman platform can no longer be selected. Signed-off-by: Geert Uytterhoeven Acked-by: Arnd Bergmann --- drivers/input/serio/i8042-io.h | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/input/serio/i8042-io.h b/drivers/input/serio/i8042-io.h index da0bf85321de3a77..64590b86eb37ff30 100644 --- a/drivers/input/serio/i8042-io.h +++ b/drivers/input/serio/i8042-io.h @@ -21,8 +21,6 @@ #elif defined(__arm__) /* defined in include/asm-arm/arch-xxx/irqs.h */ #include -#elif defined(CONFIG_SH_CAYMAN) -#include #elif defined(CONFIG_PPC) extern int of_i8042_kbd_irq; extern int of_i8042_aux_irq;