From patchwork Wed Jun 17 00:32:05 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: =?utf-8?q?Ond=C5=99ej_Jirman?= X-Patchwork-Id: 11609225 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id C756890 for ; Wed, 17 Jun 2020 07:26:46 +0000 (UTC) Received: from gabe.freedesktop.org (gabe.freedesktop.org [131.252.210.177]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id A6DBE20786 for ; Wed, 17 Jun 2020 07:26:46 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=fail reason="signature verification failed" (1024-bit key) header.d=megous.com header.i=@megous.com header.b="iFZWG7Jk" DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org A6DBE20786 Authentication-Results: mail.kernel.org; dmarc=fail (p=none dis=none) header.from=megous.com Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=dri-devel-bounces@lists.freedesktop.org Received: from gabe.freedesktop.org (localhost [127.0.0.1]) by gabe.freedesktop.org (Postfix) with ESMTP id 989836EA96; Wed, 17 Jun 2020 07:26:05 +0000 (UTC) X-Original-To: dri-devel@lists.freedesktop.org Delivered-To: dri-devel@lists.freedesktop.org Received: from vps.xff.cz (vps.xff.cz [195.181.215.36]) by gabe.freedesktop.org (Postfix) with ESMTPS id 492786EA06 for ; Wed, 17 Jun 2020 00:32:16 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=megous.com; s=mail; t=1592353934; bh=V8lg3QrmlL/+ORB8+T8iagnNb4aO75aHpHs9Ov8wOuQ=; h=From:To:Cc:Subject:Date:References:From; b=iFZWG7Jk4cGe0wnGo0yrSN6+U5rgFqkyH8eIktOW7n56R2p856nCoJ1v+VvwN+4I/ g/Z3xsN9cFb8Tkost21g70ouI4VdW5S1oU30IoY+uQIpVz2S+Qqp6CgcwrzPZGMvby +RdEsQGjErwFbTBbDoTt0kbluFoYxx60oAPE1EI4= From: Ondrej Jirman To: linux-sunxi@googlegroups.com, Thierry Reding , Sam Ravnborg , David Airlie , Daniel Vetter , Rob Herring , Maxime Ripard , Chen-Yu Tsai , Linus Walleij , Icenowy Zheng Subject: [PATCH v4 1/5] dt-bindings: vendor-prefixes: Add Xingbangda Date: Wed, 17 Jun 2020 02:32:05 +0200 Message-Id: <20200617003209.670819-2-megous@megous.com> In-Reply-To: <20200617003209.670819-1-megous@megous.com> References: <20200617003209.670819-1-megous@megous.com> MIME-Version: 1.0 X-Mailman-Approved-At: Wed, 17 Jun 2020 07:26:02 +0000 X-BeenThere: dri-devel@lists.freedesktop.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: Direct Rendering Infrastructure - Development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: Ondrej Jirman , devicetree@vger.kernel.org, Samuel Holland , Bhushan Shah , linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org, Luca Weiss , Martijn Braam , linux-arm-kernel@lists.infradead.org Errors-To: dri-devel-bounces@lists.freedesktop.org Sender: "dri-devel" From: Icenowy Zheng Shenzhen Xingbangda Display Technology Co., Ltd is a company which produces LCD modules. It supplies the LCD panels for the PinePhone. Add the vendor prefix of it. Signed-off-by: Icenowy Zheng Signed-off-by: Ondrej Jirman Acked-by: Rob Herring --- Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 9aeab66be85f..740b116b179f 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -1157,6 +1157,8 @@ patternProperties: description: Xiaomi Technology Co., Ltd. "^xillybus,.*": description: Xillybus Ltd. + "^xingbangda,.*": + description: Shenzhen Xingbangda Display Technology Co., Ltd "^xinpeng,.*": description: Shenzhen Xinpeng Technology Co., Ltd "^xlnx,.*": From patchwork Wed Jun 17 00:32:06 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: =?utf-8?q?Ond=C5=99ej_Jirman?= X-Patchwork-Id: 11609215 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id E14BB90 for ; Wed, 17 Jun 2020 07:26:35 +0000 (UTC) Received: from gabe.freedesktop.org (gabe.freedesktop.org [131.252.210.177]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id C037E208B8 for ; Wed, 17 Jun 2020 07:26:35 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=fail reason="signature verification failed" (1024-bit key) header.d=megous.com header.i=@megous.com header.b="o0vX8nMP" DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org C037E208B8 Authentication-Results: mail.kernel.org; dmarc=fail (p=none dis=none) header.from=megous.com Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=dri-devel-bounces@lists.freedesktop.org Received: from gabe.freedesktop.org (localhost [127.0.0.1]) by gabe.freedesktop.org (Postfix) with ESMTP id 820BF6EAA8; Wed, 17 Jun 2020 07:26:07 +0000 (UTC) X-Original-To: dri-devel@lists.freedesktop.org Delivered-To: dri-devel@lists.freedesktop.org Received: from vps.xff.cz (vps.xff.cz [195.181.215.36]) by gabe.freedesktop.org (Postfix) with ESMTPS id 51E016EA07 for ; Wed, 17 Jun 2020 00:32:16 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=megous.com; s=mail; t=1592353934; bh=AevVvrXCG/6msnRbOhEC/03tKHisk5y4PX4d+SPQkuw=; h=From:To:Cc:Subject:Date:References:From; b=o0vX8nMPVcUPUCHAfRZce4ecgwFJ6TrWo0+s5nAauhfo5cRU4lBnRswBWKaN7+twi jMrKSPl5KnNaduv4d2ZsR385eh/NO1UYrmbyyBHzfSUNhwktJw0/6lE58rDi5V1YEd RYuzuIoIQ3cYi2+4ZON79kX++pWVTsGYZ8Dk+MCc= From: Ondrej Jirman To: linux-sunxi@googlegroups.com, Thierry Reding , Sam Ravnborg , David Airlie , Daniel Vetter , Rob Herring , Maxime Ripard , Chen-Yu Tsai , Linus Walleij , Icenowy Zheng Subject: [PATCH v4 2/5] dt-bindings: panel: Add binding for Xingbangda XBD599 panel Date: Wed, 17 Jun 2020 02:32:06 +0200 Message-Id: <20200617003209.670819-3-megous@megous.com> In-Reply-To: <20200617003209.670819-1-megous@megous.com> References: <20200617003209.670819-1-megous@megous.com> MIME-Version: 1.0 X-Mailman-Approved-At: Wed, 17 Jun 2020 07:26:02 +0000 X-BeenThere: dri-devel@lists.freedesktop.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: Direct Rendering Infrastructure - Development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: Ondrej Jirman , devicetree@vger.kernel.org, Samuel Holland , Bhushan Shah , linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org, Luca Weiss , Martijn Braam , linux-arm-kernel@lists.infradead.org Errors-To: dri-devel-bounces@lists.freedesktop.org Sender: "dri-devel" From: Icenowy Zheng Xingbangda XBD599 is a 5.99" 720x1440 MIPI-DSI LCD panel. It is based on Sitronix ST7703 LCD controller. Add its device tree binding. Signed-off-by: Icenowy Zheng Signed-off-by: Ondrej Jirman Reviewed-by: Linus Walleij Reviewed-by: Rob Herring --- .../display/panel/sitronix,st7703.yaml | 63 +++++++++++++++++++ 1 file changed, 63 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/sitronix,st7703.yaml diff --git a/Documentation/devicetree/bindings/display/panel/sitronix,st7703.yaml b/Documentation/devicetree/bindings/display/panel/sitronix,st7703.yaml new file mode 100644 index 000000000000..6e1606db4ab4 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/sitronix,st7703.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/sitronix,st7703.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sitronix ST7703 MIPI DSI panel + +maintainers: + - Icenowy Zheng + - Ondrej Jirman + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + items: + - enum: + - xingbangda,xbd599 + - const: sitronix,st7703 + + reg: + description: DSI virtual channel used by that screen + maxItems: 1 + + vcc-supply: + description: regulator that supplies the VCC voltage + + iovcc-supply: + description: regulator that supplies the IOVCC voltage + + reset-gpios: true + + backlight: true + +required: + - compatible + - reg + - vcc-supply + - iovcc-supply + - reset-gpios + +additionalProperties: false + +examples: + - | + #include + + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "xingbangda,xbd599", "sitronix,st7703"; + reg = <0>; + reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* LCD-RST: PD24 */ + iovcc-supply = <®_dldo2>; + vcc-supply = <®_ldo_io0>; + backlight = <&backlight>; + }; + }; + From patchwork Wed Jun 17 00:32:07 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: =?utf-8?q?Ond=C5=99ej_Jirman?= X-Patchwork-Id: 11609243 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 6B38E912 for ; Wed, 17 Jun 2020 07:27:08 +0000 (UTC) Received: from gabe.freedesktop.org (gabe.freedesktop.org [131.252.210.177]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id 4A60720786 for ; Wed, 17 Jun 2020 07:27:08 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=fail reason="signature verification failed" (1024-bit key) header.d=megous.com header.i=@megous.com header.b="QvHyhg6t" DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org 4A60720786 Authentication-Results: mail.kernel.org; dmarc=fail (p=none dis=none) header.from=megous.com Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=dri-devel-bounces@lists.freedesktop.org Received: from gabe.freedesktop.org (localhost [127.0.0.1]) by gabe.freedesktop.org (Postfix) with ESMTP id EA1DD6EA99; Wed, 17 Jun 2020 07:26:05 +0000 (UTC) X-Original-To: dri-devel@lists.freedesktop.org Delivered-To: dri-devel@lists.freedesktop.org Received: from vps.xff.cz (vps.xff.cz [195.181.215.36]) by gabe.freedesktop.org (Postfix) with ESMTPS id B5CD06E991 for ; Wed, 17 Jun 2020 00:32:16 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=megous.com; s=mail; t=1592353935; bh=8j2JM5cOMLr97aC+5pvvp4/4c+zoPVcVBix5aM6ojTY=; h=From:To:Cc:Subject:Date:References:From; b=QvHyhg6tLrbx3l2LT5fpW+2atrbQ9BnzcvcJjTQ/Q2fIvp8XB9ooZAO6wEWoAW2Zb BhcPiApYQEUN0k9gepwxEhUkl9jx6dUtnS5XhOOOUKPPw+mWvT+IW1w6IUQdepQkgU ddmrUshaXsoA+Eyb+Bwr0DRwwEaSK5UopyjhIzZ0= From: Ondrej Jirman To: linux-sunxi@googlegroups.com, Thierry Reding , Sam Ravnborg , David Airlie , Daniel Vetter , Rob Herring , Maxime Ripard , Chen-Yu Tsai , Linus Walleij , Icenowy Zheng Subject: [PATCH v4 3/5] drm: panel: Add Xingbangda XBD599 panel (ST7703 controller) Date: Wed, 17 Jun 2020 02:32:07 +0200 Message-Id: <20200617003209.670819-4-megous@megous.com> In-Reply-To: <20200617003209.670819-1-megous@megous.com> References: <20200617003209.670819-1-megous@megous.com> MIME-Version: 1.0 X-Mailman-Approved-At: Wed, 17 Jun 2020 07:26:02 +0000 X-BeenThere: dri-devel@lists.freedesktop.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: Direct Rendering Infrastructure - Development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: Ondrej Jirman , devicetree@vger.kernel.org, Samuel Holland , Bhushan Shah , linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org, Luca Weiss , Martijn Braam , linux-arm-kernel@lists.infradead.org Errors-To: dri-devel-bounces@lists.freedesktop.org Sender: "dri-devel" From: Icenowy Zheng Xingbangda XBD599 is a 5.99" 720x1440 MIPI-DSI IPS LCD panel made by Xingbangda, which is used on PinePhone final assembled phones. It is based on Sitronix ST7703 LCD controller. Add support for it. Signed-off-by: Icenowy Zheng Signed-off-by: Ondrej Jirman --- drivers/gpu/drm/panel/Kconfig | 10 + drivers/gpu/drm/panel/Makefile | 1 + drivers/gpu/drm/panel/panel-sitronix-st7703.c | 535 ++++++++++++++++++ 3 files changed, 546 insertions(+) create mode 100644 drivers/gpu/drm/panel/panel-sitronix-st7703.c diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig index 39055c1f0e2f..b7bc157b0612 100644 --- a/drivers/gpu/drm/panel/Kconfig +++ b/drivers/gpu/drm/panel/Kconfig @@ -395,6 +395,16 @@ config DRM_PANEL_SITRONIX_ST7701 ST7701 controller for 480X864 LCD panels with MIPI/RGB/SPI system interfaces. +config DRM_PANEL_SITRONIX_ST7703 + tristate "Sitronix ST7703 panel driver" + depends on OF + depends on DRM_MIPI_DSI + depends on BACKLIGHT_CLASS_DEVICE + help + Say Y here if you want to enable support for the Sitronix + ST7703 controller for 720X1440 LCD panels with MIPI/RGB/SPI + system interfaces. + config DRM_PANEL_SITRONIX_ST7789V tristate "Sitronix ST7789V panel" depends on OF && SPI diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile index de74f282c433..47f4789a8685 100644 --- a/drivers/gpu/drm/panel/Makefile +++ b/drivers/gpu/drm/panel/Makefile @@ -41,6 +41,7 @@ obj-$(CONFIG_DRM_PANEL_SHARP_LQ101R1SX01) += panel-sharp-lq101r1sx01.o obj-$(CONFIG_DRM_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o obj-$(CONFIG_DRM_PANEL_SHARP_LS043T1LE01) += panel-sharp-ls043t1le01.o obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7701) += panel-sitronix-st7701.o +obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7703) += panel-sitronix-st7703.o obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7789V) += panel-sitronix-st7789v.o obj-$(CONFIG_DRM_PANEL_SONY_ACX424AKP) += panel-sony-acx424akp.o obj-$(CONFIG_DRM_PANEL_SONY_ACX565AKM) += panel-sony-acx565akm.o diff --git a/drivers/gpu/drm/panel/panel-sitronix-st7703.c b/drivers/gpu/drm/panel/panel-sitronix-st7703.c new file mode 100644 index 000000000000..dbd46b6c0b46 --- /dev/null +++ b/drivers/gpu/drm/panel/panel-sitronix-st7703.c @@ -0,0 +1,535 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * DRM driver for Sitronix ST7703 MIPI DSI panel + * + * Copyright (C) 2020 Ondrej Jirman + * Copyright (C) 2019-2020 Icenowy Zheng + * + * Based on panel-rocktech-jh057n00900.c, which is: + * Copyright (C) Purism SPC 2019 + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +/* Manufacturer specific DCS commands */ +#define ST7703_CMD_SETDISP 0xB2 +#define ST7703_CMD_SETRGBIF 0xB3 +#define ST7703_CMD_SETCYC 0xB4 +#define ST7703_CMD_SETBGP 0xB5 +#define ST7703_CMD_SETVCOM 0xB6 +#define ST7703_CMD_SETOTP 0xB7 +#define ST7703_CMD_SETPOWER_EXT 0xB8 +#define ST7703_CMD_SETEXTC 0xB9 +#define ST7703_CMD_SETMIPI 0xBA +#define ST7703_CMD_SETVDC 0xBC +#define ST7703_CMD_UNK_BF 0xBF +#define ST7703_CMD_SETSCR 0xC0 +#define ST7703_CMD_SETPOWER 0xC1 +#define ST7703_CMD_UNK_C6 0xC6 +#define ST7703_CMD_SETPANEL 0xCC +#define ST7703_CMD_RDID1 0xDA +#define ST7703_CMD_RDID2 0xDB +#define ST7703_CMD_RDID3 0xDC +#define ST7703_CMD_SETGAMMA 0xE0 +#define ST7703_CMD_SETEQ 0xE3 +#define ST7703_CMD_SETGIP1 0xE9 +#define ST7703_CMD_SETGIP2 0xEA + +struct st7703_panel_desc { + const struct drm_display_mode *mode; + unsigned int lanes; + unsigned long flags; + enum mipi_dsi_pixel_format format; + const char *const *supply_names; + unsigned int num_supplies; +}; + +struct st7703 { + struct device *dev; + struct drm_panel panel; + struct gpio_desc *reset_gpio; + struct regulator_bulk_data *supplies; + const struct st7703_panel_desc *desc; + bool prepared; +}; + +static inline struct st7703 *panel_to_st7703(struct drm_panel *panel) +{ + return container_of(panel, struct st7703, panel); +} + +#define dsi_dcs_write_seq(dsi, cmd, seq...) do { \ + static const u8 d[] = { seq }; \ + int ret; \ + ret = mipi_dsi_dcs_write(dsi, cmd, d, ARRAY_SIZE(d)); \ + if (ret < 0) \ + return ret; \ + } while (0) + + +static int st7703_init_sequence(struct st7703 *ctx) +{ + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev); + struct device *dev = ctx->dev; + + /* + * Init sequence was supplied by the panel vendor. + */ + + /* Magic sequence to unlock user commands below. */ + dsi_dcs_write_seq(dsi, ST7703_CMD_SETEXTC, 0xF1, 0x12, 0x83); + + dsi_dcs_write_seq(dsi, ST7703_CMD_SETMIPI, + 0x33, /* VC_main = 0, Lane_Number = 3 (4 lanes) */ + 0x81, /* DSI_LDO_SEL = 1.7V, RTERM = 90 Ohm */ + 0x05, /* IHSRX = x6 (Low High Speed driving ability) */ + 0xF9, /* TX_CLK_SEL = fDSICLK/16 */ + 0x0E, /* HFP_OSC (min. HFP number in DSI mode) */ + 0x0E, /* HBP_OSC (min. HBP number in DSI mode) */ + /* The rest is undocumented in ST7703 datasheet */ + 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x44, 0x25, 0x00, 0x91, 0x0a, 0x00, 0x00, 0x02, + 0x4F, 0x11, 0x00, 0x00, 0x37); + + dsi_dcs_write_seq(dsi, ST7703_CMD_SETPOWER_EXT, + 0x25, /* PCCS = 2, ECP_DC_DIV = 1/4 HSYNC */ + 0x22, /* DT = 15ms XDK_ECP = x2 */ + 0x20, /* PFM_DC_DIV = /1 */ + 0x03 /* ECP_SYNC_EN = 1, VGX_SYNC_EN = 1 */); + + /* RGB I/F porch timing */ + dsi_dcs_write_seq(dsi, ST7703_CMD_SETRGBIF, + 0x10, /* VBP_RGB_GEN */ + 0x10, /* VFP_RGB_GEN */ + 0x05, /* DE_BP_RGB_GEN */ + 0x05, /* DE_FP_RGB_GEN */ + /* The rest is undocumented in ST7703 datasheet */ + 0x03, 0xFF, + 0x00, 0x00, + 0x00, 0x00); + + /* Source driving settings. */ + dsi_dcs_write_seq(dsi, ST7703_CMD_SETSCR, + 0x73, /* N_POPON */ + 0x73, /* N_NOPON */ + 0x50, /* I_POPON */ + 0x50, /* I_NOPON */ + 0x00, /* SCR[31,24] */ + 0xC0, /* SCR[23,16] */ + 0x08, /* SCR[15,8] */ + 0x70, /* SCR[7,0] */ + 0x00 /* Undocumented */); + + /* NVDDD_SEL = -1.8V, VDDD_SEL = out of range (possibly 1.9V?) */ + dsi_dcs_write_seq(dsi, ST7703_CMD_SETVDC, 0x4E); + + /* + * SS_PANEL = 1 (reverse scan), GS_PANEL = 0 (normal scan) + * REV_PANEL = 1 (normally black panel), BGR_PANEL = 1 (BGR) + */ + dsi_dcs_write_seq(dsi, ST7703_CMD_SETPANEL, 0x0B); + + /* Zig-Zag Type C column inversion. */ + dsi_dcs_write_seq(dsi, ST7703_CMD_SETCYC, 0x80); + + /* Set display resolution. */ + dsi_dcs_write_seq(dsi, ST7703_CMD_SETDISP, + 0xF0, /* NL = 240 */ + 0x12, /* RES_V_LSB = 0, BLK_CON = VSSD, + * RESO_SEL = 720RGB + */ + 0xF0 /* WHITE_GND_EN = 1 (GND), + * WHITE_FRAME_SEL = 7 frames, + * ISC = 0 frames + */); + + dsi_dcs_write_seq(dsi, ST7703_CMD_SETEQ, + 0x00, /* PNOEQ */ + 0x00, /* NNOEQ */ + 0x0B, /* PEQGND */ + 0x0B, /* NEQGND */ + 0x10, /* PEQVCI */ + 0x10, /* NEQVCI */ + 0x00, /* PEQVCI1 */ + 0x00, /* NEQVCI1 */ + 0x00, /* reserved */ + 0x00, /* reserved */ + 0xFF, /* reserved */ + 0x00, /* reserved */ + 0xC0, /* ESD_DET_DATA_WHITE = 1, ESD_WHITE_EN = 1 */ + 0x10 /* SLPIN_OPTION = 1 (no need vsync after sleep-in) + * VEDIO_NO_CHECK_EN = 0 + * ESD_WHITE_GND_EN = 0 + * ESD_DET_TIME_SEL = 0 frames + */); + + /* Undocumented command. */ + dsi_dcs_write_seq(dsi, ST7703_CMD_UNK_C6, 0x01, 0x00, 0xFF, 0xFF, 0x00); + + dsi_dcs_write_seq(dsi, ST7703_CMD_SETPOWER, + 0x74, /* VBTHS, VBTLS: VGH = 17V, VBL = -11V */ + 0x00, /* FBOFF_VGH = 0, FBOFF_VGL = 0 */ + 0x32, /* VRP */ + 0x32, /* VRN */ + 0x77, /* reserved */ + 0xF1, /* APS = 1 (small), + * VGL_DET_EN = 1, VGH_DET_EN = 1, + * VGL_TURBO = 1, VGH_TURBO = 1 + */ + 0xFF, /* VGH1_L_DIV, VGL1_L_DIV (1.5MHz) */ + 0xFF, /* VGH1_R_DIV, VGL1_R_DIV (1.5MHz) */ + 0xCC, /* VGH2_L_DIV, VGL2_L_DIV (2.6MHz) */ + 0xCC, /* VGH2_R_DIV, VGL2_R_DIV (2.6MHz) */ + 0x77, /* VGH3_L_DIV, VGL3_L_DIV (4.5MHz) */ + 0x77 /* VGH3_R_DIV, VGL3_R_DIV (4.5MHz) */); + + /* Reference voltage. */ + dsi_dcs_write_seq(dsi, ST7703_CMD_SETBGP, + 0x07, /* VREF_SEL = 4.2V */ + 0x07 /* NVREF_SEL = 4.2V */); + + dsi_dcs_write_seq(dsi, ST7703_CMD_SETVCOM, + 0x2C, /* VCOMDC_F = -0.67V */ + 0x2C /* VCOMDC_B = -0.67V */); + + /* Undocumented command. */ + dsi_dcs_write_seq(dsi, ST7703_CMD_UNK_BF, 0x02, 0x11, 0x00); + + /* This command is to set forward GIP timing. */ + dsi_dcs_write_seq(dsi, ST7703_CMD_SETGIP1, + 0x82, 0x10, 0x06, 0x05, 0xA2, 0x0A, 0xA5, 0x12, + 0x31, 0x23, 0x37, 0x83, 0x04, 0xBC, 0x27, 0x38, + 0x0C, 0x00, 0x03, 0x00, 0x00, 0x00, 0x0C, 0x00, + 0x03, 0x00, 0x00, 0x00, 0x75, 0x75, 0x31, 0x88, + 0x88, 0x88, 0x88, 0x88, 0x88, 0x13, 0x88, 0x64, + 0x64, 0x20, 0x88, 0x88, 0x88, 0x88, 0x88, 0x88, + 0x02, 0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00); + + /* This command is to set backward GIP timing. */ + dsi_dcs_write_seq(dsi, ST7703_CMD_SETGIP2, + 0x02, 0x21, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x02, 0x46, 0x02, 0x88, + 0x88, 0x88, 0x88, 0x88, 0x88, 0x64, 0x88, 0x13, + 0x57, 0x13, 0x88, 0x88, 0x88, 0x88, 0x88, 0x88, + 0x75, 0x88, 0x23, 0x14, 0x00, 0x00, 0x02, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x0A, + 0xA5, 0x00, 0x00, 0x00, 0x00); + + /* Adjust the gamma characteristics of the panel. */ + dsi_dcs_write_seq(dsi, ST7703_CMD_SETGAMMA, + 0x00, 0x09, 0x0D, 0x23, 0x27, 0x3C, 0x41, 0x35, + 0x07, 0x0D, 0x0E, 0x12, 0x13, 0x10, 0x12, 0x12, + 0x18, 0x00, 0x09, 0x0D, 0x23, 0x27, 0x3C, 0x41, + 0x35, 0x07, 0x0D, 0x0E, 0x12, 0x13, 0x10, 0x12, + 0x12, 0x18); + + DRM_DEV_DEBUG_DRIVER(dev, "Panel init sequence done\n"); + return 0; +} + +static int st7703_read_id(struct st7703 *ctx) +{ + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev); + u8 id1, id2, id3; + int ret; + + ret = mipi_dsi_dcs_read(dsi, ST7703_CMD_RDID1, &id1, 1); + if (ret < 0) { + DRM_DEV_ERROR(ctx->dev, "could not read ID1\n"); + return ret; + } + + ret = mipi_dsi_dcs_read(dsi, ST7703_CMD_RDID2, &id2, 1); + if (ret < 0) { + DRM_DEV_ERROR(ctx->dev, "could not read ID2\n"); + return ret; + } + + ret = mipi_dsi_dcs_read(dsi, ST7703_CMD_RDID3, &id3, 1); + if (ret < 0) { + DRM_DEV_ERROR(ctx->dev, "could not read ID3\n"); + return ret; + } + + DRM_DEV_INFO(ctx->dev, + "manufacturer: %02x version: %02x driver: %02x\n", + id1, id2, id3); + + return 0; +} + +static int st7703_prepare(struct drm_panel *panel) +{ + struct st7703 *ctx = panel_to_st7703(panel); + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev); + int ret; + + if (ctx->prepared) + return 0; + + gpiod_set_value_cansleep(ctx->reset_gpio, 1); + + ret = regulator_bulk_enable(ctx->desc->num_supplies, ctx->supplies); + if (ret) + return ret; + + /* Wait for regulators to stabilize. */ + usleep_range(10000, 20000); + + gpiod_set_value_cansleep(ctx->reset_gpio, 0); + + /* There needs to be at least 15ms post-reset delay. */ + usleep_range(15000, 20000); + + ret = st7703_read_id(ctx); + if (ret < 0) + goto err_poweroff; + + ret = st7703_init_sequence(ctx); + if (ret < 0) { + DRM_DEV_ERROR(ctx->dev, + "Panel init sequence failed (%d)\n", ret); + goto err_poweroff; + } + + ret = mipi_dsi_dcs_exit_sleep_mode(dsi); + if (ret < 0) { + DRM_DEV_ERROR(ctx->dev, + "Failed to exit sleep mode (%d)\n", ret); + goto err_poweroff; + } + + msleep(120); + + ret = mipi_dsi_dcs_set_display_on(dsi); + if (ret) { + DRM_DEV_ERROR(ctx->dev, + "Failed to turn on the display (%d)\n", ret); + goto err_poweroff; + } + + ctx->prepared = true; + + return 0; + +err_poweroff: + gpiod_set_value_cansleep(ctx->reset_gpio, 1); + regulator_bulk_disable(ctx->desc->num_supplies, ctx->supplies); + return ret; +} + +static int st7703_enable(struct drm_panel *panel) +{ + /* + * Avoid flicker by waiting for slightly more than 1 + * frame's interval. + */ + msleep(50); + + return 0; +} + +static int st7703_unprepare(struct drm_panel *panel) +{ + struct st7703 *ctx = panel_to_st7703(panel); + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev); + int ret; + + if (!ctx->prepared) + return 0; + + ret = mipi_dsi_dcs_set_display_off(dsi); + if (ret < 0) + DRM_DEV_ERROR(ctx->dev, + "Failed to turn off the display (%d)\n", ret); + + ret = mipi_dsi_dcs_enter_sleep_mode(dsi); + if (ret < 0) + DRM_DEV_ERROR(ctx->dev, + "Failed to enter sleep mode (%d)\n", ret); + + gpiod_set_value_cansleep(ctx->reset_gpio, 1); + regulator_bulk_disable(ctx->desc->num_supplies, ctx->supplies); + ctx->prepared = false; + + return 0; +} + +static int st7703_get_modes(struct drm_panel *panel, + struct drm_connector *connector) +{ + struct st7703 *ctx = panel_to_st7703(panel); + struct drm_display_mode *mode; + + mode = drm_mode_duplicate(connector->dev, ctx->desc->mode); + if (!mode) { + DRM_DEV_ERROR(ctx->dev, "Failed to add mode\n"); + return -ENOMEM; + } + + drm_mode_set_name(mode); + + connector->display_info.width_mm = mode->width_mm; + connector->display_info.height_mm = mode->height_mm; + drm_mode_probed_add(connector, mode); + + return 1; +} + +static const struct drm_panel_funcs st7703_drm_funcs = { + .prepare = st7703_prepare, + .enable = st7703_enable, + .unprepare = st7703_unprepare, + .get_modes = st7703_get_modes, +}; + +static const struct drm_display_mode xbd599_mode = { + .hdisplay = 720, + .hsync_start = 720 + 40, + .hsync_end = 720 + 40 + 40, + .htotal = 720 + 40 + 40 + 40, + .vdisplay = 1440, + .vsync_start = 1440 + 18, + .vsync_end = 1440 + 18 + 10, + .vtotal = 1440 + 18 + 10 + 17, + .vrefresh = 60, + .clock = 69000, + .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC, + + .width_mm = 68, + .height_mm = 136, + .type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED, +}; + +static const char * const xbd599_supply_names[] = { + "iovcc", + "vcc", +}; + +static const struct st7703_panel_desc xbd599_desc = { + .mode = &xbd599_mode, + .lanes = 4, + .flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE, + .format = MIPI_DSI_FMT_RGB888, + .supply_names = xbd599_supply_names, + .num_supplies = ARRAY_SIZE(xbd599_supply_names), +}; + +static int st7703_probe(struct mipi_dsi_device *dsi) +{ + const struct st7703_panel_desc *desc; + struct device *dev = &dsi->dev; + struct st7703 *ctx; + int i, ret; + + ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL); + if (!ctx) + return -ENOMEM; + + ctx->dev = dev; + ctx->desc = desc = of_device_get_match_data(dev); + + dsi->mode_flags = desc->flags; + dsi->format = desc->format; + dsi->lanes = desc->lanes; + + ctx->supplies = devm_kcalloc(&dsi->dev, desc->num_supplies, + sizeof(*ctx->supplies), + GFP_KERNEL); + if (!ctx->supplies) + return -ENOMEM; + + for (i = 0; i < desc->num_supplies; i++) + ctx->supplies[i].supply = desc->supply_names[i]; + + ret = devm_regulator_bulk_get(&dsi->dev, desc->num_supplies, + ctx->supplies); + if (ret < 0) + return ret; + + ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW); + if (IS_ERR(ctx->reset_gpio)) { + DRM_DEV_ERROR(dev, "Can't get reset gpio\n"); + return PTR_ERR(ctx->reset_gpio); + } + + mipi_dsi_set_drvdata(dsi, ctx); + + drm_panel_init(&ctx->panel, &dsi->dev, &st7703_drm_funcs, + DRM_MODE_CONNECTOR_DSI); + + ret = drm_panel_of_backlight(&ctx->panel); + if (ret) + return ret; + + drm_panel_add(&ctx->panel); + + ret = mipi_dsi_attach(dsi); + if (ret < 0) { + drm_panel_remove(&ctx->panel); + return ret; + } + + return 0; +} + +static void st7703_shutdown(struct mipi_dsi_device *dsi) +{ + struct st7703 *ctx = mipi_dsi_get_drvdata(dsi); + int ret; + + ret = drm_panel_unprepare(&ctx->panel); + if (ret < 0) + DRM_DEV_ERROR(&dsi->dev, + "Failed to unprepare panel (%d)\n", ret); +} + +static int st7703_remove(struct mipi_dsi_device *dsi) +{ + struct st7703 *ctx = mipi_dsi_get_drvdata(dsi); + int ret; + + st7703_shutdown(dsi); + + ret = mipi_dsi_detach(dsi); + if (ret < 0) + DRM_DEV_ERROR(&dsi->dev, + "Failed to detach from DSI host (%d)\n", ret); + + drm_panel_remove(&ctx->panel); + + return 0; +} + +static const struct of_device_id st7703_of_match[] = { + { .compatible = "xingbangda,xbd599", .data = &xbd599_desc }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, st7703_of_match); + +static struct mipi_dsi_driver st7703_driver = { + .probe = st7703_probe, + .remove = st7703_remove, + .shutdown = st7703_shutdown, + .driver = { + .name = "st7703", + .of_match_table = st7703_of_match, + }, +}; +module_mipi_dsi_driver(st7703_driver); + +MODULE_AUTHOR("Icenowy Zheng "); +MODULE_DESCRIPTION("DRM driver for Sitronix ST7703 MIPI DSI panel"); +MODULE_LICENSE("GPL v2"); From patchwork Wed Jun 17 00:32:08 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: =?utf-8?q?Ond=C5=99ej_Jirman?= X-Patchwork-Id: 11609253 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id B397F912 for ; Wed, 17 Jun 2020 07:27:27 +0000 (UTC) Received: from gabe.freedesktop.org (gabe.freedesktop.org [131.252.210.177]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id 92C3721475 for ; Wed, 17 Jun 2020 07:27:27 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=fail reason="signature verification failed" (1024-bit key) header.d=megous.com header.i=@megous.com header.b="XdZlr/C+" DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org 92C3721475 Authentication-Results: mail.kernel.org; dmarc=fail (p=none dis=none) header.from=megous.com Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=dri-devel-bounces@lists.freedesktop.org Received: from gabe.freedesktop.org (localhost [127.0.0.1]) by gabe.freedesktop.org (Postfix) with ESMTP id EBBA56EAD0; Wed, 17 Jun 2020 07:26:11 +0000 (UTC) X-Original-To: dri-devel@lists.freedesktop.org Delivered-To: dri-devel@lists.freedesktop.org Received: from vps.xff.cz (vps.xff.cz [195.181.215.36]) by gabe.freedesktop.org (Postfix) with ESMTPS id 2664F6E9DD for ; Wed, 17 Jun 2020 00:32:17 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=megous.com; s=mail; t=1592353935; bh=3S3w0uvAKPDUtGD8MIYTKombkxXLzYzAQMsH7sPMsH4=; h=From:To:Cc:Subject:Date:References:From; b=XdZlr/C+ImanUaucvoM7Ogvp30ybO9Q3X6aCNQJV3IDhDN4WzrZKOVMOP0siuMnBv QW47juFN6MrxA00Jv3Mntgqx/RJ1G8mdK4YMDjJxMkVA59dTDabUhUnG9ZNU7+i9WM 1nXx7Eofz5qkagJHmEm/rIgQESZIUvnNVYIhtlJ0= From: Ondrej Jirman To: linux-sunxi@googlegroups.com, Thierry Reding , Sam Ravnborg , David Airlie , Daniel Vetter , Rob Herring , Maxime Ripard , Chen-Yu Tsai , Linus Walleij , Icenowy Zheng Subject: [PATCH v4 4/5] arm64: dts: sun50i-a64-pinephone: Enable LCD support on PinePhone Date: Wed, 17 Jun 2020 02:32:08 +0200 Message-Id: <20200617003209.670819-5-megous@megous.com> In-Reply-To: <20200617003209.670819-1-megous@megous.com> References: <20200617003209.670819-1-megous@megous.com> MIME-Version: 1.0 X-Mailman-Approved-At: Wed, 17 Jun 2020 07:26:02 +0000 X-BeenThere: dri-devel@lists.freedesktop.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: Direct Rendering Infrastructure - Development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: Ondrej Jirman , devicetree@vger.kernel.org, Samuel Holland , Bhushan Shah , linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org, Luca Weiss , Martijn Braam , linux-arm-kernel@lists.infradead.org Errors-To: dri-devel-bounces@lists.freedesktop.org Sender: "dri-devel" From: Icenowy Zheng PinePhone uses PWM backlight and a XBD599 LCD panel over DSI for display. Backlight levels curve was optimized by Martijn Braam using a lux meter. Add its device nodes. Signed-off-by: Icenowy Zheng Signed-off-by: Martijn Braam Signed-off-by: Ondrej Jirman --- .../allwinner/sun50i-a64-pinephone-1.1.dts | 19 ++++++++++ .../dts/allwinner/sun50i-a64-pinephone.dtsi | 35 +++++++++++++++++++ 2 files changed, 54 insertions(+) diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts index 06a775c41664..3e99a87e9ce5 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts @@ -9,3 +9,22 @@ / { model = "Pine64 PinePhone Braveheart (1.1)"; compatible = "pine64,pinephone-1.1", "allwinner,sun50i-a64"; }; + +&backlight { + power-supply = <®_ldo_io0>; + /* + * PWM backlight circuit on this PinePhone revision was changed since + * 1.0, and the lowest PWM duty cycle that doesn't lead to backlight + * being off is around 20%. Duty cycle for the lowest brightness level + * also varries quite a bit between individual boards, so the lowest + * value here was chosen as a safe default. + */ + brightness-levels = < + 774 793 814 842 + 882 935 1003 1088 + 1192 1316 1462 1633 + 1830 2054 2309 2596 + 2916 3271 3664 4096>; + num-interpolated-steps = <50>; + default-brightness-level = <400>; +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi index cefda145c3c9..e60b57f8ac14 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi @@ -16,6 +16,13 @@ aliases { serial0 = &uart0; }; + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&r_pwm 0 50000 PWM_POLARITY_INVERTED>; + enable-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */ + /* Backlight configuration differs per PinePhone revision. */ + }; + chosen { stdout-path = "serial0:115200n8"; }; @@ -84,6 +91,30 @@ &dai { status = "okay"; }; +&de { + status = "okay"; +}; + +&dphy { + status = "okay"; +}; + +&dsi { + vcc-dsi-supply = <®_dldo1>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + panel@0 { + compatible = "xingbangda,xbd599", "sitronix,st7703"; + reg = <0>; + reset-gpios = <&pio 3 23 GPIO_ACTIVE_LOW>; /* PD23 */ + iovcc-supply = <®_dldo2>; + vcc-supply = <®_ldo_io0>; + backlight = <&backlight>; + }; +}; + &ehci0 { status = "okay"; }; @@ -188,6 +219,10 @@ &r_pio { */ }; +&r_pwm { + status = "okay"; +}; + &r_rsb { status = "okay"; From patchwork Wed Jun 17 00:32:09 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: =?utf-8?q?Ond=C5=99ej_Jirman?= X-Patchwork-Id: 11609245 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id D7EB6912 for ; Wed, 17 Jun 2020 07:27:09 +0000 (UTC) Received: from gabe.freedesktop.org (gabe.freedesktop.org [131.252.210.177]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id B717020786 for ; Wed, 17 Jun 2020 07:27:09 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=fail reason="signature verification failed" (1024-bit key) header.d=megous.com header.i=@megous.com header.b="fzUsKIKz" DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org B717020786 Authentication-Results: mail.kernel.org; dmarc=fail (p=none dis=none) header.from=megous.com Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=dri-devel-bounces@lists.freedesktop.org Received: from gabe.freedesktop.org (localhost [127.0.0.1]) by gabe.freedesktop.org (Postfix) with ESMTP id 14AEE6EAA4; Wed, 17 Jun 2020 07:26:07 +0000 (UTC) X-Original-To: dri-devel@lists.freedesktop.org Delivered-To: dri-devel@lists.freedesktop.org Received: from vps.xff.cz (vps.xff.cz [195.181.215.36]) by gabe.freedesktop.org (Postfix) with ESMTPS id 0357C6E0E8 for ; Wed, 17 Jun 2020 00:32:18 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=megous.com; s=mail; t=1592353935; bh=b1/7qbKU/Xjmfy3lRGyd7/FtHpXUhaxNH3hyWhF4w/I=; h=From:To:Cc:Subject:Date:References:From; b=fzUsKIKzoQ+1OaWhcz+hZ7MIjha/GYJ3SwW1xSWguquo+3lqSLOaIfzBYY7ta0io8 rL8DemDnSAwGa1BBkB0+DuxTcVg51GGq/DYZa1aStAcUu9yBwIafghQ+VTlwXqqR0h 3THfBi7Z/3isAxxKn49vLTr+lDXdBWz0mMWLDxk4= From: Ondrej Jirman To: linux-sunxi@googlegroups.com, Thierry Reding , Sam Ravnborg , David Airlie , Daniel Vetter , Rob Herring , Maxime Ripard , Chen-Yu Tsai , Linus Walleij , Icenowy Zheng Subject: [PATCH v4 5/5] arm64: dts: sun50i-a64-pinephone: Add touchscreen support Date: Wed, 17 Jun 2020 02:32:09 +0200 Message-Id: <20200617003209.670819-6-megous@megous.com> In-Reply-To: <20200617003209.670819-1-megous@megous.com> References: <20200617003209.670819-1-megous@megous.com> MIME-Version: 1.0 X-Mailman-Approved-At: Wed, 17 Jun 2020 07:26:02 +0000 X-BeenThere: dri-devel@lists.freedesktop.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: Direct Rendering Infrastructure - Development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: Ondrej Jirman , devicetree@vger.kernel.org, Samuel Holland , Bhushan Shah , linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org, Luca Weiss , Martijn Braam , linux-arm-kernel@lists.infradead.org Errors-To: dri-devel-bounces@lists.freedesktop.org Sender: "dri-devel" Pinephone has a Goodix GT917S capacitive touchscreen controller on I2C0 bus. Add support for it. Signed-off-by: Ondrej Jirman --- .../dts/allwinner/sun50i-a64-pinephone.dtsi | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi index e60b57f8ac14..6b2ff431cddb 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi @@ -123,6 +123,25 @@ &ehci1 { status = "okay"; }; +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + status = "okay"; + + touchscreen@5d { + compatible = "goodix,gt917s", "goodix,gt911"; + reg = <0x5d>; + interrupt-parent = <&pio>; + interrupts = <7 4 IRQ_TYPE_LEVEL_HIGH>; /* PH4 */ + irq-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + reset-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */ + AVDD28-supply = <®_ldo_io0>; + VDDIO-supply = <®_ldo_io0>; + touchscreen-size-x = <720>; + touchscreen-size-y = <1440>; + }; +}; + &i2c1 { status = "okay";