From patchwork Fri Jun 26 05:59:36 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Marius Zachmann X-Patchwork-Id: 11626565 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 05C18913 for ; Fri, 26 Jun 2020 05:59:55 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id DD354207E8 for ; Fri, 26 Jun 2020 05:59:54 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1725884AbgFZF7y (ORCPT ); Fri, 26 Jun 2020 01:59:54 -0400 Received: from ms-10.1blu.de ([178.254.4.101]:45508 "EHLO ms-10.1blu.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1725801AbgFZF7y (ORCPT ); Fri, 26 Jun 2020 01:59:54 -0400 Received: from [78.43.71.214] (helo=marius.fritz.box) by ms-10.1blu.de with esmtpsa (TLS1.2:ECDHE_RSA_AES_128_GCM_SHA256:128) (Exim 4.90_1) (envelope-from ) id 1johOp-0006Fj-Er; Fri, 26 Jun 2020 07:59:43 +0200 From: Marius Zachmann To: Guenter Roeck Cc: Marius Zachmann , Jean Delvare , Jiri Kosina , Benjamin Tissoires , linux-hwmon@vger.kernel.org, linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org, linux-input@vger.kernel.org Subject: [PATCH v7] hwmon: add Corsair Commander Pro driver Date: Fri, 26 Jun 2020 07:59:36 +0200 Message-Id: <20200626055936.4441-1-mail@mariuszachmann.de> X-Mailer: git-send-email 2.27.0 MIME-Version: 1.0 X-Con-Id: 241080 X-Con-U: 0-mail X-Originating-IP: 78.43.71.214 Sender: linux-hwmon-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-hwmon@vger.kernel.org This is v7 of a driver for the Corsair Commander Pro. It provides sysfs attributes for: - Reading fan speed - Reading temp sensors - Reading voltage values - Writing pwm and reading last written pwm - Reading fan and temp connection status It is an usb driver, so it needs to be ignored by usbhid. The Corsair Commander Pro is a fan controller and provides no means for user interaction. The two device numbers are there, because there is a slightly different version of the same device. (Only difference seem to be in some presets.) This is based on the staging/hwmon tree. Signed-off-by: Marius Zachmann Reviewed-by: Guenter Roeck Acked-by: Jiri Kosina Acked-by: Benjamin Tissoires --- Changes from v6 - used break after connection checks in ccp_is_visible Changes from v5 - added bitmaps for temp_cnct and fan_cnct - ccp_visible returns 0 when there is no connection and removed tests for connection in other functions - removed temp labels - add define for fan and temp sensor count - removed unneccesary mutex from get_temp_cnct and get_fan_cnct and moved these functions directly above ccp_probe - no more setting return values in ccp_read, ccp_read_string, ccp_write just return directly instead of break - get_data returns values (always >= 0) directly - inlined get_temp - removed first two error messages in send_usb_cmd and changed last one to dev_dbg - comment alignments and clarifications - renamed goto label to "out_unlock" Changes from v4 - squashed 3 commits into one. Changes from v3 - add device ids to hid_ignore_list in hid-quirks.h - removed unused update_interval - ccp_disconnect is static --- Documentation/hwmon/corsair-cpro.rst | 39 +++ Documentation/hwmon/index.rst | 1 + MAINTAINERS | 6 + drivers/hid/hid-quirks.c | 2 + drivers/hwmon/Kconfig | 10 + drivers/hwmon/Makefile | 1 + drivers/hwmon/corsair-cpro.c | 456 +++++++++++++++++++++++++++ 7 files changed, 515 insertions(+) create mode 100644 Documentation/hwmon/corsair-cpro.rst create mode 100644 drivers/hwmon/corsair-cpro.c -- 2.27.0 diff --git a/Documentation/hwmon/corsair-cpro.rst b/Documentation/hwmon/corsair-cpro.rst new file mode 100644 index 000000000000..5913e23d764c --- /dev/null +++ b/Documentation/hwmon/corsair-cpro.rst @@ -0,0 +1,39 @@ +.. SPDX-License-Identifier: GPL-2.0-or-later + +Kernel driver corsair-cpro +========================== + +Supported devices: + + * Corsair Commander Pro + * Corsair Commander Pro (1000D) + +Author: Marius Zachmann + +Description +----------- + +This driver implements the sysfs interface for the Corsair Commander Pro. +The Corsair Commander Pro is a USB device with 6 fan connectors, +4 temperature sensor connectors and 2 Corsair LED connectors. +It can read the voltage levels on the SATA power connector. + +Usage Notes +----------- + +Since it is a USB device, hotswapping is possible. The device is autodetected. + +Sysfs entries +------------- + +======================= ===================================================================== +in0_input Voltage on SATA 12v +in1_input Voltage on SATA 5v +in2_input Voltage on SATA 3.3v +temp[1-4]_input Temperature on connected temperature sensors +fan[1-6]_input Connected fan rpm. +fan[1-6]_label Shows fan type as detected by the device. +pwm[1-6] Sets the fan speed. Values from 0-255. + When reading, it reports the last value if it was set by the driver. + Otherwise returns 0. +======================= ===================================================================== diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst index 55ff4b7c5349..750d3a975d82 100644 --- a/Documentation/hwmon/index.rst +++ b/Documentation/hwmon/index.rst @@ -47,6 +47,7 @@ Hardware Monitoring Kernel Drivers bel-pfe bt1-pvt coretemp + corsair-cpro da9052 da9055 dell-smm-hwmon diff --git a/MAINTAINERS b/MAINTAINERS index 68f21d46614c..47b0361718f4 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4400,6 +4400,12 @@ S: Maintained F: Documentation/hwmon/coretemp.rst F: drivers/hwmon/coretemp.c +CORSAIR-CPRO HARDWARE MONITOR DRIVER +M: Marius +L: linux-hwmon@vger.kernel.org +S: Maintained +F: drivers/hwmon/corsair-cpro.c + COSA/SRP SYNC SERIAL DRIVER M: Jan "Yenya" Kasprzak S: Maintained diff --git a/drivers/hid/hid-quirks.c b/drivers/hid/hid-quirks.c index ca8b5c261c7c..7b7bc7737c53 100644 --- a/drivers/hid/hid-quirks.c +++ b/drivers/hid/hid-quirks.c @@ -699,6 +699,8 @@ static const struct hid_device_id hid_ignore_list[] = { { HID_USB_DEVICE(USB_VENDOR_ID_AXENTIA, USB_DEVICE_ID_AXENTIA_FM_RADIO) }, { HID_USB_DEVICE(USB_VENDOR_ID_BERKSHIRE, USB_DEVICE_ID_BERKSHIRE_PCWD) }, { HID_USB_DEVICE(USB_VENDOR_ID_CIDC, 0x0103) }, + { HID_USB_DEVICE(USB_VENDOR_ID_CORSAIR, 0x0c10) }, + { HID_USB_DEVICE(USB_VENDOR_ID_CORSAIR, 0x1d00) }, { HID_USB_DEVICE(USB_VENDOR_ID_CYGNAL, USB_DEVICE_ID_CYGNAL_RADIO_SI470X) }, { HID_USB_DEVICE(USB_VENDOR_ID_CYGNAL, USB_DEVICE_ID_CYGNAL_RADIO_SI4713) }, { HID_USB_DEVICE(USB_VENDOR_ID_CMEDIA, USB_DEVICE_ID_CM109) }, diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 288ae9f63588..8b046a5dfa40 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -439,6 +439,16 @@ config SENSORS_BT1_PVT_ALARMS the data conversion will be periodically performed and the data will be saved in the internal driver cache. +config SENSORS_CORSAIR_CPRO + tristate "Corsair Commander Pro controller" + depends on USB + help + If you say yes here you get support for the Corsair Commander Pro + controller. + + This driver can also be built as a module. If so, the module + will be called corsair-cpro. + config SENSORS_DRIVETEMP tristate "Hard disk drives with temperature sensors" depends on SCSI && ATA diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 3e32c21f5efe..18e1ef74ade7 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -56,6 +56,7 @@ obj-$(CONFIG_SENSORS_ATXP1) += atxp1.o obj-$(CONFIG_SENSORS_AXI_FAN_CONTROL) += axi-fan-control.o obj-$(CONFIG_SENSORS_BT1_PVT) += bt1-pvt.o obj-$(CONFIG_SENSORS_CORETEMP) += coretemp.o +obj-$(CONFIG_SENSORS_CORSAIR_CPRO) += corsair-cpro.o obj-$(CONFIG_SENSORS_DA9052_ADC)+= da9052-hwmon.o obj-$(CONFIG_SENSORS_DA9055)+= da9055-hwmon.o obj-$(CONFIG_SENSORS_DELL_SMM) += dell-smm-hwmon.o diff --git a/drivers/hwmon/corsair-cpro.c b/drivers/hwmon/corsair-cpro.c new file mode 100644 index 000000000000..a22583acc229 --- /dev/null +++ b/drivers/hwmon/corsair-cpro.c @@ -0,0 +1,456 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * corsair-cpro.c - Linux driver for Corsair Commander Pro + * Copyright (C) 2020 Marius Zachmann + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define USB_VENDOR_ID_CORSAIR 0x1b1c +#define USB_PRODUCT_ID_CORSAIR_COMMANDERPRO 0x0c10 +#define USB_PRODUCT_ID_CORSAIR_1000D 0x1d00 + +#define OUT_BUFFER_SIZE 63 +#define IN_BUFFER_SIZE 16 +#define LABEL_LENGTH 11 + +#define CTL_GET_TMP_CNCT 0x10 /* + * returns in bytes 1-4 for each temp sensor: + * 0 not connected + * 1 connected + */ +#define CTL_GET_TMP 0x11 /* + * send: byte 1 is channel, rest zero + * rcv: returns temp for channel in centi-degree celsius + * in bytes 1 and 2 + * returns 17 in byte 0 if no sensor is connected + */ +#define CTL_GET_VOLT 0x12 /* + * send: byte 1 is rail number: 0 = 12v, 1 = 5v, 2 = 3.3v + * rcv: returns millivolt in bytes 1,2 + */ +#define CTL_GET_FAN_CNCT 0x20 /* + * returns in bytes 1-6 for each fan: + * 0 not connected + * 1 3pin + * 2 4pin + */ +#define CTL_GET_FAN_RPM 0x21 /* + * send: byte 1 is channel, rest zero + * rcv: returns rpm in bytes 1,2 + */ +#define CTL_SET_FAN_FPWM 0x23 /* + * set fixed pwm + * send: byte 1 is fan number + * send: byte 2 is percentage from 0 - 100 + */ + +#define NUM_FANS 6 +#define NUM_TEMP_SENSORS 4 + +struct ccp_device { + struct usb_device *udev; + struct mutex mutex; /* whenever buffer is used, lock before send_usb_cmd */ + u8 *buffer; + int pwm[6]; + DECLARE_BITMAP(temp_cnct, NUM_TEMP_SENSORS); + DECLARE_BITMAP(fan_cnct, NUM_FANS); + char fan_label[6][LABEL_LENGTH]; +}; + +/* send command, check for error in response, response in ccp->buffer */ +static int send_usb_cmd(struct ccp_device *ccp, u8 command, u8 byte1, u8 byte2) +{ + int actual_length; + int ret; + + memset(ccp->buffer, 0x00, OUT_BUFFER_SIZE); + ccp->buffer[0] = command; + ccp->buffer[1] = byte1; + ccp->buffer[2] = byte2; + + ret = usb_bulk_msg(ccp->udev, usb_sndintpipe(ccp->udev, 2), ccp->buffer, OUT_BUFFER_SIZE, + &actual_length, 1000); + if (ret) + return ret; + + /* response needs to be received every time */ + ret = usb_bulk_msg(ccp->udev, usb_rcvintpipe(ccp->udev, 1), ccp->buffer, IN_BUFFER_SIZE, + &actual_length, 1000); + if (ret) + return ret; + + /* first byte of response is error code */ + if (ccp->buffer[0] != 0x00) { + dev_dbg(&ccp->udev->dev, "device response error: %d", ccp->buffer[0]); + return -EIO; + } + + return 0; +} + +/* requests and returns single data values depending on channel */ +static int get_data(struct ccp_device *ccp, int command, int channel) +{ + int ret; + + mutex_lock(&ccp->mutex); + + ret = send_usb_cmd(ccp, command, channel, 0); + if (ret) + goto out_unlock; + + ret = (ccp->buffer[1] << 8) + ccp->buffer[2]; + +out_unlock: + mutex_unlock(&ccp->mutex); + return ret; +} + +static int set_pwm(struct ccp_device *ccp, int channel, long val) +{ + int ret; + + if (val < 0 || val > 255) + return -EINVAL; + + ccp->pwm[channel] = val; + + /* The Corsair Commander Pro uses values from 0-100 */ + val = DIV_ROUND_CLOSEST(val * 100, 255); + + mutex_lock(&ccp->mutex); + + ret = send_usb_cmd(ccp, CTL_SET_FAN_FPWM, channel, val); + + mutex_unlock(&ccp->mutex); + return ret; +} + +static int ccp_read_string(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, const char **str) +{ + struct ccp_device *ccp = dev_get_drvdata(dev); + + switch (type) { + case hwmon_fan: + switch (attr) { + case hwmon_fan_label: + *str = ccp->fan_label[channel]; + return 0; + default: + break; + } + break; + default: + break; + } + + return -EOPNOTSUPP; +} + +static int ccp_read(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, long *val) +{ + struct ccp_device *ccp = dev_get_drvdata(dev); + int ret; + + switch (type) { + case hwmon_temp: + switch (attr) { + case hwmon_temp_input: + ret = get_data(ccp, CTL_GET_TMP, channel); + if (ret < 0) + return ret; + *val = ret * 10; + return 0; + default: + break; + } + break; + case hwmon_fan: + switch (attr) { + case hwmon_fan_input: + ret = get_data(ccp, CTL_GET_FAN_RPM, channel); + if (ret < 0) + return ret; + *val = ret; + return 0; + default: + break; + } + break; + case hwmon_pwm: + switch (attr) { + case hwmon_pwm_input: + /* how to read pwm values from the device is currently unknown */ + /* driver returns last set value or 0 */ + *val = ccp->pwm[channel]; + return 0; + default: + break; + } + break; + case hwmon_in: + switch (attr) { + case hwmon_in_input: + ret = get_data(ccp, CTL_GET_VOLT, channel); + if (ret < 0) + return ret; + *val = ret; + return 0; + default: + break; + } + break; + default: + break; + } + + return -EOPNOTSUPP; +}; + +static int ccp_write(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, long val) +{ + struct ccp_device *ccp = dev_get_drvdata(dev); + + switch (type) { + case hwmon_pwm: + switch (attr) { + case hwmon_pwm_input: + return set_pwm(ccp, channel, val); + default: + break; + } + break; + default: + break; + } + + return -EOPNOTSUPP; +}; + +static umode_t ccp_is_visible(const void *data, enum hwmon_sensor_types type, + u32 attr, int channel) +{ + const struct ccp_device *ccp = data; + + switch (type) { + case hwmon_temp: + if (!test_bit(channel, ccp->temp_cnct)) + break; + + switch (attr) { + case hwmon_temp_input: + return 0444; + case hwmon_temp_label: + return 0444; + default: + break; + } + break; + case hwmon_fan: + if (!test_bit(channel, ccp->fan_cnct)) + break; + + switch (attr) { + case hwmon_fan_input: + return 0444; + case hwmon_fan_label: + return 0444; + default: + break; + } + break; + case hwmon_pwm: + if (!test_bit(channel, ccp->fan_cnct)) + break; + + switch (attr) { + case hwmon_pwm_input: + return 0644; + default: + break; + } + break; + case hwmon_in: + switch (attr) { + case hwmon_in_input: + return 0444; + default: + break; + } + break; + default: + break; + } + + return 0; +}; + +static const struct hwmon_ops ccp_hwmon_ops = { + .is_visible = ccp_is_visible, + .read = ccp_read, + .read_string = ccp_read_string, + .write = ccp_write, +}; + +static const struct hwmon_channel_info *ccp_info[] = { + HWMON_CHANNEL_INFO(chip, + HWMON_C_REGISTER_TZ), + HWMON_CHANNEL_INFO(temp, + HWMON_T_INPUT, + HWMON_T_INPUT, + HWMON_T_INPUT, + HWMON_T_INPUT + ), + HWMON_CHANNEL_INFO(fan, + HWMON_F_INPUT | HWMON_F_LABEL, + HWMON_F_INPUT | HWMON_F_LABEL, + HWMON_F_INPUT | HWMON_F_LABEL, + HWMON_F_INPUT | HWMON_F_LABEL, + HWMON_F_INPUT | HWMON_F_LABEL, + HWMON_F_INPUT | HWMON_F_LABEL + ), + HWMON_CHANNEL_INFO(pwm, + HWMON_PWM_INPUT, + HWMON_PWM_INPUT, + HWMON_PWM_INPUT, + HWMON_PWM_INPUT, + HWMON_PWM_INPUT, + HWMON_PWM_INPUT + ), + HWMON_CHANNEL_INFO(in, + HWMON_I_INPUT, + HWMON_I_INPUT, + HWMON_I_INPUT + ), + NULL +}; + +static const struct hwmon_chip_info ccp_chip_info = { + .ops = &ccp_hwmon_ops, + .info = ccp_info, +}; + +/* read fan connection status and set labels */ +static int get_fan_cnct(struct ccp_device *ccp) +{ + int channel; + int mode; + int ret; + + ret = send_usb_cmd(ccp, CTL_GET_FAN_CNCT, 0, 0); + if (ret) + return ret; + + for (channel = 0; channel < NUM_FANS; channel++) { + mode = ccp->buffer[channel + 1]; + if (mode == 0) + continue; + + set_bit(channel, ccp->fan_cnct); + + switch (mode) { + case 1: + scnprintf(ccp->fan_label[channel], LABEL_LENGTH, + "fan%d 3pin", channel + 1); + break; + case 2: + scnprintf(ccp->fan_label[channel], LABEL_LENGTH, + "fan%d 4pin", channel + 1); + break; + default: + scnprintf(ccp->fan_label[channel], LABEL_LENGTH, + "fan%d other", channel + 1); + break; + } + } + + return 0; +} + +/* read temp sensor connection status */ +static int get_temp_cnct(struct ccp_device *ccp) +{ + int channel; + int mode; + int ret; + + ret = send_usb_cmd(ccp, CTL_GET_TMP_CNCT, 0, 0); + if (ret) + return ret; + + for (channel = 0; channel < NUM_TEMP_SENSORS; channel++) { + mode = ccp->buffer[channel + 1]; + if (mode == 0) + continue; + + set_bit(channel, ccp->temp_cnct); + } + + return 0; +} + +static int ccp_probe(struct usb_interface *intf, const struct usb_device_id *id) +{ + struct device *hwmon_dev; + struct ccp_device *ccp; + int ret; + + ccp = devm_kzalloc(&intf->dev, sizeof(*ccp), GFP_KERNEL); + if (!ccp) + return -ENOMEM; + + ccp->buffer = devm_kmalloc(&intf->dev, OUT_BUFFER_SIZE, GFP_KERNEL); + if (!ccp->buffer) + return -ENOMEM; + + mutex_init(&ccp->mutex); + + ccp->udev = interface_to_usbdev(intf); + + /* temp and fan connection status only updates when device is powered on */ + ret = get_temp_cnct(ccp); + if (ret) + return ret; + + ret = get_fan_cnct(ccp); + if (ret) + return ret; + + hwmon_dev = devm_hwmon_device_register_with_info(&intf->dev, "corsaircpro", ccp, + &ccp_chip_info, 0); + + return PTR_ERR_OR_ZERO(hwmon_dev); +} + +static void ccp_disconnect(struct usb_interface *intf) +{ +} + +static const struct usb_device_id ccp_devices[] = { + { USB_DEVICE(USB_VENDOR_ID_CORSAIR, USB_PRODUCT_ID_CORSAIR_COMMANDERPRO) }, + { USB_DEVICE(USB_VENDOR_ID_CORSAIR, USB_PRODUCT_ID_CORSAIR_1000D) }, + { } +}; + +static struct usb_driver ccp_driver = { + .name = "corsair-cpro", + .probe = ccp_probe, + .disconnect = ccp_disconnect, + .id_table = ccp_devices +}; + +MODULE_DEVICE_TABLE(usb, ccp_devices); +MODULE_LICENSE("GPL"); + +module_usb_driver(ccp_driver);