From patchwork Sun Jul 26 15:06:53 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Sivaprakash Murugesan X-Patchwork-Id: 11685847 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id EBE6913A4 for ; Sun, 26 Jul 2020 15:07:03 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id C606E2070B for ; Sun, 26 Jul 2020 15:07:03 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=fail reason="signature verification failed" (1024-bit key) header.d=qti.qualcomm.com header.i=@qti.qualcomm.com header.b="x3838UaC" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726669AbgGZPHA (ORCPT ); Sun, 26 Jul 2020 11:07:00 -0400 Received: from alexa-out-sd-02.qualcomm.com ([199.106.114.39]:17342 "EHLO alexa-out-sd-02.qualcomm.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1725989AbgGZPHA (ORCPT ); Sun, 26 Jul 2020 11:07:00 -0400 DKIM-Signature: v=1; a=rsa-sha256; c=simple/simple; d=qti.qualcomm.com; i=@qti.qualcomm.com; q=dns/txt; s=qcdkim; t=1595776020; x=1627312020; h=from:to:subject:date:message-id; bh=GLsa1ZtdUAX56gr8h8qftpIxMLoK+yB1UfBJnLQn3FA=; b=x3838UaCMLjpGsJdS3RyjP46HIeRUCOy/v9rE0OT3OSuWC0glvEy39oj /PfmbrcxQ4qaS1LuTyKCo1KCRGVB24O/fFCl2g8TCaAd8VUZZIQ9fKUsf fniG1Q/9zGFaqrSOX/rKid8EtDueVEi1IKMUyAOvzysmTNFD1UOwpbjdz E=; Received: from unknown (HELO ironmsg-SD-alpha.qualcomm.com) ([10.53.140.30]) by alexa-out-sd-02.qualcomm.com with ESMTP; 26 Jul 2020 08:07:00 -0700 Received: from sivaprak-linux.qualcomm.com ([10.201.3.202]) by ironmsg-SD-alpha.qualcomm.com with ESMTP; 26 Jul 2020 08:06:56 -0700 Received: by sivaprak-linux.qualcomm.com (Postfix, from userid 459349) id 0CB28219AB; Sun, 26 Jul 2020 20:36:54 +0530 (IST) From: Sivaprakash Murugesan To: agross@kernel.org, bjorn.andersson@linaro.org, bhelgaas@google.com, robh+dt@kernel.org, sivaprak@codeaurora.org, linux-arm-msm@vger.kernel.org, linux-pci@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH V2] dt-bindings: pci: convert QCOM pci bindings to YAML Date: Sun, 26 Jul 2020 20:36:53 +0530 Message-Id: <1595776013-12877-1-git-send-email-sivaprak@qti.qualcomm.com> X-Mailer: git-send-email 2.7.4 Sender: linux-arm-msm-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org From: Sivaprakash Murugesan Convert QCOM pci bindings to YAML schema Signed-off-by: Sivaprakash Murugesan Reviewed-by: Rob Herring --- [v2] - Referenced pci-bus.yaml - removed duplicate properties already referenced by pci-bus.yaml - Addressed comments from Rob .../devicetree/bindings/pci/qcom,pcie.txt | 330 --------------- .../devicetree/bindings/pci/qcom,pcie.yaml | 447 +++++++++++++++++++++ 2 files changed, 447 insertions(+), 330 deletions(-) delete mode 100644 Documentation/devicetree/bindings/pci/qcom,pcie.txt create mode 100644 Documentation/devicetree/bindings/pci/qcom,pcie.yaml diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.txt b/Documentation/devicetree/bindings/pci/qcom,pcie.txt deleted file mode 100644 index 981b4de12807..000000000000 --- a/Documentation/devicetree/bindings/pci/qcom,pcie.txt +++ /dev/null @@ -1,330 +0,0 @@ -* Qualcomm PCI express root complex - -- compatible: - Usage: required - Value type: - Definition: Value should contain - - "qcom,pcie-ipq8064" for ipq8064 - - "qcom,pcie-apq8064" for apq8064 - - "qcom,pcie-apq8084" for apq8084 - - "qcom,pcie-msm8996" for msm8996 or apq8096 - - "qcom,pcie-ipq4019" for ipq4019 - - "qcom,pcie-ipq8074" for ipq8074 - - "qcom,pcie-qcs404" for qcs404 - - "qcom,pcie-sdm845" for sdm845 - -- reg: - Usage: required - Value type: - Definition: Register ranges as listed in the reg-names property - -- reg-names: - Usage: required - Value type: - Definition: Must include the following entries - - "parf" Qualcomm specific registers - - "dbi" DesignWare PCIe registers - - "elbi" External local bus interface registers - - "config" PCIe configuration space - -- device_type: - Usage: required - Value type: - Definition: Should be "pci". As specified in designware-pcie.txt - -- #address-cells: - Usage: required - Value type: - Definition: Should be 3. As specified in designware-pcie.txt - -- #size-cells: - Usage: required - Value type: - Definition: Should be 2. As specified in designware-pcie.txt - -- ranges: - Usage: required - Value type: - Definition: As specified in designware-pcie.txt - -- interrupts: - Usage: required - Value type: - Definition: MSI interrupt - -- interrupt-names: - Usage: required - Value type: - Definition: Should contain "msi" - -- #interrupt-cells: - Usage: required - Value type: - Definition: Should be 1. As specified in designware-pcie.txt - -- interrupt-map-mask: - Usage: required - Value type: - Definition: As specified in designware-pcie.txt - -- interrupt-map: - Usage: required - Value type: - Definition: As specified in designware-pcie.txt - -- clocks: - Usage: required - Value type: - Definition: List of phandle and clock specifier pairs as listed - in clock-names property - -- clock-names: - Usage: required - Value type: - Definition: Should contain the following entries - - "iface" Configuration AHB clock - -- clock-names: - Usage: required for ipq/apq8064 - Value type: - Definition: Should contain the following entries - - "core" Clocks the pcie hw block - - "phy" Clocks the pcie PHY block -- clock-names: - Usage: required for apq8084/ipq4019 - Value type: - Definition: Should contain the following entries - - "aux" Auxiliary (AUX) clock - - "bus_master" Master AXI clock - - "bus_slave" Slave AXI clock - -- clock-names: - Usage: required for msm8996/apq8096 - Value type: - Definition: Should contain the following entries - - "pipe" Pipe Clock driving internal logic - - "aux" Auxiliary (AUX) clock - - "cfg" Configuration clock - - "bus_master" Master AXI clock - - "bus_slave" Slave AXI clock - -- clock-names: - Usage: required for ipq8074 - Value type: - Definition: Should contain the following entries - - "iface" PCIe to SysNOC BIU clock - - "axi_m" AXI Master clock - - "axi_s" AXI Slave clock - - "ahb" AHB clock - - "aux" Auxiliary clock - -- clock-names: - Usage: required for qcs404 - Value type: - Definition: Should contain the following entries - - "iface" AHB clock - - "aux" Auxiliary clock - - "master_bus" AXI Master clock - - "slave_bus" AXI Slave clock - --clock-names: - Usage: required for sdm845 - Value type: - Definition: Should contain the following entries - - "aux" Auxiliary clock - - "cfg" Configuration clock - - "bus_master" Master AXI clock - - "bus_slave" Slave AXI clock - - "slave_q2a" Slave Q2A clock - - "tbu" PCIe TBU clock - - "pipe" PIPE clock - -- resets: - Usage: required - Value type: - Definition: List of phandle and reset specifier pairs as listed - in reset-names property - -- reset-names: - Usage: required for ipq/apq8064 - Value type: - Definition: Should contain the following entries - - "axi" AXI reset - - "ahb" AHB reset - - "por" POR reset - - "pci" PCI reset - - "phy" PHY reset - -- reset-names: - Usage: required for apq8084 - Value type: - Definition: Should contain the following entries - - "core" Core reset - -- reset-names: - Usage: required for ipq/apq8064 - Value type: - Definition: Should contain the following entries - - "axi_m" AXI master reset - - "axi_s" AXI slave reset - - "pipe" PIPE reset - - "axi_m_vmid" VMID reset - - "axi_s_xpu" XPU reset - - "parf" PARF reset - - "phy" PHY reset - - "axi_m_sticky" AXI sticky reset - - "pipe_sticky" PIPE sticky reset - - "pwr" PWR reset - - "ahb" AHB reset - - "phy_ahb" PHY AHB reset - -- reset-names: - Usage: required for ipq8074 - Value type: - Definition: Should contain the following entries - - "pipe" PIPE reset - - "sleep" Sleep reset - - "sticky" Core Sticky reset - - "axi_m" AXI Master reset - - "axi_s" AXI Slave reset - - "ahb" AHB Reset - - "axi_m_sticky" AXI Master Sticky reset - -- reset-names: - Usage: required for qcs404 - Value type: - Definition: Should contain the following entries - - "axi_m" AXI Master reset - - "axi_s" AXI Slave reset - - "axi_m_sticky" AXI Master Sticky reset - - "pipe_sticky" PIPE sticky reset - - "pwr" PWR reset - - "ahb" AHB reset - -- reset-names: - Usage: required for sdm845 - Value type: - Definition: Should contain the following entries - - "pci" PCIe core reset - -- power-domains: - Usage: required for apq8084 and msm8996/apq8096 - Value type: - Definition: A phandle and power domain specifier pair to the - power domain which is responsible for collapsing - and restoring power to the peripheral - -- vdda-supply: - Usage: required - Value type: - Definition: A phandle to the core analog power supply - -- vdda_phy-supply: - Usage: required for ipq/apq8064 - Value type: - Definition: A phandle to the analog power supply for PHY - -- vdda_refclk-supply: - Usage: required for ipq/apq8064 - Value type: - Definition: A phandle to the analog power supply for IC which generates - reference clock -- vddpe-3v3-supply: - Usage: optional - Value type: - Definition: A phandle to the PCIe endpoint power supply - -- phys: - Usage: required for apq8084 and qcs404 - Value type: - Definition: List of phandle(s) as listed in phy-names property - -- phy-names: - Usage: required for apq8084 and qcs404 - Value type: - Definition: Should contain "pciephy" - -- -gpios: - Usage: optional - Value type: - Definition: List of phandle and GPIO specifier pairs. Should contain - - "perst-gpios" PCIe endpoint reset signal line - - "wake-gpios" PCIe endpoint wake signal line - -* Example for ipq/apq8064 - pcie@1b500000 { - compatible = "qcom,pcie-apq8064", "qcom,pcie-ipq8064", "snps,dw-pcie"; - reg = <0x1b500000 0x1000 - 0x1b502000 0x80 - 0x1b600000 0x100 - 0x0ff00000 0x100000>; - reg-names = "dbi", "elbi", "parf", "config"; - device_type = "pci"; - linux,pci-domain = <0>; - bus-range = <0x00 0xff>; - num-lanes = <1>; - #address-cells = <3>; - #size-cells = <2>; - ranges = <0x81000000 0 0 0x0fe00000 0 0x00100000 /* I/O */ - 0x82000000 0 0 0x08000000 0 0x07e00000>; /* memory */ - interrupts = ; - interrupt-names = "msi"; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0x7>; - interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ - <0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ - <0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ - <0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ - clocks = <&gcc PCIE_A_CLK>, - <&gcc PCIE_H_CLK>, - <&gcc PCIE_PHY_CLK>; - clock-names = "core", "iface", "phy"; - resets = <&gcc PCIE_ACLK_RESET>, - <&gcc PCIE_HCLK_RESET>, - <&gcc PCIE_POR_RESET>, - <&gcc PCIE_PCI_RESET>, - <&gcc PCIE_PHY_RESET>; - reset-names = "axi", "ahb", "por", "pci", "phy"; - pinctrl-0 = <&pcie_pins_default>; - pinctrl-names = "default"; - }; - -* Example for apq8084 - pcie0@fc520000 { - compatible = "qcom,pcie-apq8084", "snps,dw-pcie"; - reg = <0xfc520000 0x2000>, - <0xff000000 0x1000>, - <0xff001000 0x1000>, - <0xff002000 0x2000>; - reg-names = "parf", "dbi", "elbi", "config"; - device_type = "pci"; - linux,pci-domain = <0>; - bus-range = <0x00 0xff>; - num-lanes = <1>; - #address-cells = <3>; - #size-cells = <2>; - ranges = <0x81000000 0 0 0xff200000 0 0x00100000 /* I/O */ - 0x82000000 0 0x00300000 0xff300000 0 0x00d00000>; /* memory */ - interrupts = ; - interrupt-names = "msi"; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0x7>; - interrupt-map = <0 0 0 1 &intc 0 244 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ - <0 0 0 2 &intc 0 245 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ - <0 0 0 3 &intc 0 247 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ - <0 0 0 4 &intc 0 248 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ - clocks = <&gcc GCC_PCIE_0_CFG_AHB_CLK>, - <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, - <&gcc GCC_PCIE_0_SLV_AXI_CLK>, - <&gcc GCC_PCIE_0_AUX_CLK>; - clock-names = "iface", "master_bus", "slave_bus", "aux"; - resets = <&gcc GCC_PCIE_0_BCR>; - reset-names = "core"; - power-domains = <&gcc PCIE0_GDSC>; - vdda-supply = <&pma8084_l3>; - phys = <&pciephy0>; - phy-names = "pciephy"; - perst-gpio = <&tlmm 70 GPIO_ACTIVE_LOW>; - pinctrl-0 = <&pcie0_pins_default>; - pinctrl-names = "default"; - }; diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml new file mode 100644 index 000000000000..ddb84f49ac1c --- /dev/null +++ b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml @@ -0,0 +1,447 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) + +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/pci/qcom,pcie.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Qualcomm PCI express root complex + +maintainers: + - Sivaprakash Murugesan + +description: + QCOM PCIe controller uses Designware IP with Qualcomm specific hardware + wrappers. + +properties: + compatible: + enum: + - qcom,pcie-apq8064 + - qcom,pcie-apq8084 + - qcom,pcie-ipq4019 + - qcom,pcie-ipq8064 + - qcom,pcie-ipq8074 + - qcom,pcie-msm8996 + - qcom,pcie-qcs404 + - qcom,pcie-sdm845 + + reg: + description: Register ranges as listed in the reg-names property + maxItems: 4 + + reg-names: + items: + - const: dbi + - const: elbi + - const: parf + - const: config + + ranges: + maxItems: 2 + + interrupts: + items: + - description: MSI interrupts + + interrupt-names: + const: msi + + "#interrupt-cells": + const: 1 + + interrupt-map-mask: + items: + - description: standard PCI properties to define mapping of PCIe + interface to interrupt numbers. + + interrupt-map: + maxItems: 4 + + clocks: + minItems: 1 + maxItems: 7 + + clock-names: + minItems: 1 + maxItems: 7 + + resets: + minItems: 1 + maxItems: 12 + + reset-names: + minItems: 1 + maxItems: 12 + + power-domains: + maxItems: 1 + + vdda-supply: + description: phandle to power supply + + vdda_phy-supply: + description: phandle to the power supply to PHY + + vdda_refclk-supply: + description: phandle to power supply for ref clock generator + + vddpe-3v3-supply: + description: PCIe endpoint power supply + + phys: + maxItems: 1 + items: + - description: phandle to the PHY block + + phy-names: + const: pciephy + + perst-gpios: + description: Endpoint reset signal line + maxItems: 1 + + num-lanes: + const: 1 + +required: + - compatible + - reg + - reg-names + - interrupts + - interrupt-names + - "#interrupt-cells" + - interrupt-map-mask + - interrupt-map + - clocks + - clock-names + - resets + - reset-names + - phys + - phy-names + +allOf: + - $ref: /schemas/pci/pci-bus.yaml# + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-apq8064 + then: + properties: + clocks: + items: + - description: clock for pcie hw block + - description: clock for pcie phy block + clock-names: + items: + - const: core + - const: phy + resets: + items: + - description: AXI reset + - description: AHB reset + - description: POR reset + - description: PCI reset + - description: PHY reset + reset-names: + items: + - const: axi + - const: ahb + - const: por + - const: pci + - const: phy + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-apq8084 + then: + properties: + clocks: + items: + - description: AUX clock + - description: Master AXI clock + - description: Slave AXI clock + clock-names: + items: + - const: aux + - const: bus_master + - const: bus_slave + resets: + items: + - description: core reset + reset-names: + items: + - const: core + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-ipq4019 + then: + properties: + clocks: + items: + - description: AUX clock + - description: Master AXI clock + - description: Slave AXI clock + clock-names: + items: + - const: aux + - const: master_bus + - const: master_slave + resets: + items: + - description: AXI master reset + - description: AXI slave reset + - description: PCIE pipe reset + - description: AXI vmid reset + - description: AXI XPU reset + - description: parf reset + - description: PHY reset + - description: AXI master sticky reset + - description: PCIE pipe sticky reset + - description: pwr reset + - description: AHB reset + - description: PHY AHB reset + reset-names: + items: + - const: axi_m + - const: axi_s + - const: pipe + - const: axi_m_vmid + - const: axi_s_xpu + - const: parf + - const: phy + - const: axi_m_sticky + - const: pipe_sticky + - const: pwr + - const: ahb + - const: phy_ahb + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-ipq8064 + then: + properties: + clocks: + items: + - description: core clock + - description: interface clock + - description: phy clock + - description: Auxilary clock + - description: reference clock + clock-names: + items: + - const: core + - const: iface + - const: phy + - const: aux + - const: ref + resets: + items: + - description: AXI reset + - description: AHB reset + - description: POR reset + - description: PCI reset + - description: PHY reset + - description: External reset + reset-names: + items: + - const: axi + - const: ahb + - const: por + - const: pci + - const: phy + - const: ext + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-ipq8074 + then: + properties: + clocks: + items: + - description: sys noc interface clock + - description: AXI master clock + - description: AXI slave clock + - description: AHB clock + - description: Auxilary clock + clock-names: + items: + - const: iface + - const: axi_m + - const: axi_s + - const: ahb + - const: aux + resets: + items: + - description: PIPE reset + - description: PCIe sleep reset + - description: PCIe sticky reset + - description: AXI master reset + - description: AXI slave reset + - description: AHB reset + - description: AXI master sticky reset + reset-names: + items: + - const: pipe + - const: sleep + - const: sticky + - const: axi_m + - const: axi_s + - const: ahb + - const: axi_m_sticky + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-msm8996 + then: + properties: + clocks: + items: + - description: PCIe pipe clock + - description: Auxilary clock + - description: AHB config clock + - description: AXI master clock + - description: AXI slave clock + clock-names: + items: + - const: pipe + - const: aux + - const: cfg + - const: bus_master + - const: bus_slave + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-qcs404 + then: + properties: + clocks: + items: + - description: interface clock + - description: Auxilary clock + - description: AXI master clock + - description: AXI slave clock + clock-names: + items: + - const: iface + - const: aux + - const: master_bus + - const: slave_bus + resets: + items: + - description: AXI master reset + - description: AXI slave reset + - description: AXI master sticky reset + - description: PCIe pipe sticky reset + - description: power reset + - description: AHB reset + reset-names: + items: + - const: axi_m + - const: axi_s + - const: axi_m_sticky + - const: pipe_sticky + - const: pwr + - const: ahb + - if: + properties: + compatible: + contains: + enum: + - qcom,pcie-sdm845 + then: + properties: + clocks: + items: + - description: PCIE pipe clock + - description: Auxilary clock + - description: AHB config clock + - description: AXI Master clock + - description: AXI Slave clock + - description: AXI Slave Q2A clock + - description: NOC TBU clock + clock-names: + items: + - const: pipe + - const: aux + - const: cfg + - const: bus_master + - const: bus_slave + - const: slave_q2a + - const: tbu + resets: + items: + - description: PCI reset + reset-names: + items: + - const: pci + +unevaluatedProperties: false + +examples: + - | + #include + #include + pcie: pci@10000000 { + compatible = "qcom,pcie-qcs404"; + reg = <0x10000000 0xf1d>, + <0x10000f20 0xa8>, + <0x07780000 0x2000>, + <0x10001000 0x2000>; + reg-names = "dbi", "elbi", "parf", "config"; + device_type = "pci"; + linux,pci-domain = <0>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x01000000 0 0 0x10003000 0 0x00010000>, /* I/O */ + <0x02000000 0 0x10013000 0x10013000 0 0x007ed000>; /* memory */ + + interrupts = ; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + clocks = <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_AXI_CLK>; + clock-names = "iface", "aux", "master_bus", "slave_bus"; + + resets = <&gcc 18>, + <&gcc 17>, + <&gcc 15>, + <&gcc 19>, + <&gcc GCC_PCIE_0_BCR>, + <&gcc 16>; + reset-names = "axi_m", + "axi_s", + "axi_m_sticky", + "pipe_sticky", + "pwr", + "ahb"; + + phys = <&pcie_phy>; + phy-names = "pciephy"; + + };