From patchwork Sun Aug 23 04:41:44 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Daniel Ogorchock X-Patchwork-Id: 11731367 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id CFC141751 for ; Sun, 23 Aug 2020 04:42:30 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id B12D020720 for ; Sun, 23 Aug 2020 04:42:30 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b="TROo9NHx" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1725963AbgHWEm1 (ORCPT ); Sun, 23 Aug 2020 00:42:27 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:59390 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1725838AbgHWEmV (ORCPT ); Sun, 23 Aug 2020 00:42:21 -0400 Received: from mail-ot1-x341.google.com (mail-ot1-x341.google.com [IPv6:2607:f8b0:4864:20::341]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 14EF1C061574 for ; Sat, 22 Aug 2020 21:42:21 -0700 (PDT) Received: by mail-ot1-x341.google.com with SMTP id a65so4713740otc.8 for ; Sat, 22 Aug 2020 21:42:21 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20161025; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=DUZ4TigEkeaOFVmx4U4yyCy3c2axjCEJKijaWvr1sbk=; b=TROo9NHx4yW/dFk9lCqBoqh4U7CElp+quT43218I2Ri3jOS+6zINWvUk8ute6ZyGX4 Skg/PXbzDncNWCW2S8z01iNI64XqpwZWv70om3FS66AnoHXRL7u1Up7T1uu0Cv7fzgS1 /YFc4GZej8XbyJndPCV3U8buUD2ELVUZH2w0tz+ev4TmmdDjV6BNyZdX+u+v77yiCIqp t1PFypRvTWFDjsSwfakVnJYqiytQr55cLIiDNgrSWWl0tLU+bgK6VLIrnC1ijnXQaJj9 nupOVfG1ES9kLpFaozeE1RbQDt+0DajfhUIqrOJ64OAwBe5QI6eEiiUT4wbViNPQfJox k+Cg== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=DUZ4TigEkeaOFVmx4U4yyCy3c2axjCEJKijaWvr1sbk=; b=l113M/qqdSJAd3gvBUkD4UpPeZs2UBnbKX3GeZHwueaIAu9A4mhfqP3vuRT9/+lv9h e06n0kHWawnpmiuxhKk5v4Tp8kUdS8ghxn2vspuokwSVQpVWoyAV0YRIyXszGylT/d47 YrNip8zPMqbR/uuBFdanretSsTT1ODSEVcEjfhjOYJrvibHdXbla/nsBFqU4YCSAKY80 FPCiWllTPgHFtxMy6eHbujpXfl33Vc5DHh3tdimecqoRFMW5T8Vb7jBZ8i9t6FkVyG3U LImezOw3dNZkjtTUXPzJauMpITP9p8GWmCFb989BvLHQvEqj1S8SvEKJJkC7ejI6EFkA TP9g== X-Gm-Message-State: AOAM532vjTyuFxCiNqEksnureuGNk3sH4aepAQZS3t/y+iII/puqNYCZ KA+oVX74Mq+y/B3sVyZV/uTpb9TcjAru+9S0 X-Google-Smtp-Source: ABdhPJy+nSi4TgoL4B32zR+GnqQMGwzmOMaZU3r0mj67O1NshkbANxq559daAh0pjdC1IJA/gGj6GQ== X-Received: by 2002:a05:6830:31ae:: with SMTP id q14mr260583ots.285.1598157739034; Sat, 22 Aug 2020 21:42:19 -0700 (PDT) Received: from Arrakis.djogorchock.com ([136.33.205.58]) by smtp.gmail.com with ESMTPSA id z10sm1308572otk.6.2020.08.22.21.42.17 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Sat, 22 Aug 2020 21:42:18 -0700 (PDT) From: "Daniel J. Ogorchock" To: linux-input@vger.kernel.org Cc: thunderbird2k@gmail.com, blaws05@gmail.com, benjamin.tissoires@redhat.com, jikos@kernel.org, Roderick.Colenbrander@sony.com, svv@google.com, s.jegen@gmail.com, carmueller@gmail.com, pgriffais@valvesoftware.com, hadess@hadess.net, "Daniel J. Ogorchock" Subject: [PATCH v12 01/14] HID: nintendo: add nintendo switch controller driver Date: Sat, 22 Aug 2020 23:41:44 -0500 Message-Id: <20200823044157.339677-2-djogorchock@gmail.com> X-Mailer: git-send-email 2.28.0 In-Reply-To: <20200823044157.339677-1-djogorchock@gmail.com> References: <20200823044157.339677-1-djogorchock@gmail.com> MIME-Version: 1.0 Sender: linux-input-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-input@vger.kernel.org The hid-nintendo driver supports the Nintendo Switch Pro Controllers and the Joy-Cons. The Pro Controllers can be used over USB or Bluetooth. The Joy-Cons each create their own, independent input devices, so it is up to userspace to combine them if desired. Signed-off-by: Daniel J. Ogorchock --- MAINTAINERS | 6 + drivers/hid/Kconfig | 11 + drivers/hid/Makefile | 1 + drivers/hid/hid-ids.h | 3 + drivers/hid/hid-nintendo.c | 871 +++++++++++++++++++++++++++++++++++++ 5 files changed, 892 insertions(+) create mode 100644 drivers/hid/hid-nintendo.c diff --git a/MAINTAINERS b/MAINTAINERS index 4e2698cc7e23..47e5a2a04665 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -12121,6 +12121,12 @@ W: http://www.netlab.is.tsukuba.ac.jp/~yokota/izumi/ninja/ F: Documentation/scsi/NinjaSCSI.rst F: drivers/scsi/nsp32* +NINTENDO HID DRIVER +M: Daniel J. Ogorchock +L: linux-input@vger.kernel.org +S: Maintained +F: drivers/hid/hid-nintendo* + NIOS2 ARCHITECTURE M: Ley Foon Tan S: Maintained diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig index 45e87dc59d4e..b5cd42ed3b04 100644 --- a/drivers/hid/Kconfig +++ b/drivers/hid/Kconfig @@ -710,6 +710,17 @@ config HID_MULTITOUCH To compile this driver as a module, choose M here: the module will be called hid-multitouch. +config HID_NINTENDO + tristate "Nintendo Joy-Con and Pro Controller support" + depends on HID + help + Adds support for the Nintendo Switch Joy-Cons and Pro Controller. + All controllers support bluetooth, and the Pro Controller also supports + its USB mode. + + To compile this driver as a module, choose M here: the + module will be called hid-nintendo. + config HID_NTI tristate "NTI keyboard adapters" help diff --git a/drivers/hid/Makefile b/drivers/hid/Makefile index d8ea4b8c95af..d0cc21b38251 100644 --- a/drivers/hid/Makefile +++ b/drivers/hid/Makefile @@ -76,6 +76,7 @@ obj-$(CONFIG_HID_MAYFLASH) += hid-mf.o obj-$(CONFIG_HID_MICROSOFT) += hid-microsoft.o obj-$(CONFIG_HID_MONTEREY) += hid-monterey.o obj-$(CONFIG_HID_MULTITOUCH) += hid-multitouch.o +obj-$(CONFIG_HID_NINTENDO) += hid-nintendo.o obj-$(CONFIG_HID_NTI) += hid-nti.o obj-$(CONFIG_HID_NTRIG) += hid-ntrig.o obj-$(CONFIG_HID_ORTEK) += hid-ortek.o diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 6f370e020feb..605c4bdaeb85 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -878,6 +878,9 @@ #define USB_VENDOR_ID_NINTENDO 0x057e #define USB_DEVICE_ID_NINTENDO_WIIMOTE 0x0306 #define USB_DEVICE_ID_NINTENDO_WIIMOTE2 0x0330 +#define USB_DEVICE_ID_NINTENDO_JOYCONL 0x2006 +#define USB_DEVICE_ID_NINTENDO_JOYCONR 0x2007 +#define USB_DEVICE_ID_NINTENDO_PROCON 0x2009 #define USB_VENDOR_ID_NOVATEK 0x0603 #define USB_DEVICE_ID_NOVATEK_PCT 0x0600 diff --git a/drivers/hid/hid-nintendo.c b/drivers/hid/hid-nintendo.c new file mode 100644 index 000000000000..7273ddf033e2 --- /dev/null +++ b/drivers/hid/hid-nintendo.c @@ -0,0 +1,871 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * HID driver for Nintendo Switch Joy-Cons and Pro Controllers + * + * Copyright (c) 2019 Daniel J. Ogorchock + * + * The following resources/projects were referenced for this driver: + * https://github.com/dekuNukem/Nintendo_Switch_Reverse_Engineering + * https://gitlab.com/pjranki/joycon-linux-kernel (Peter Rankin) + * https://github.com/FrotBot/SwitchProConLinuxUSB + * https://github.com/MTCKC/ProconXInput + * hid-wiimote kernel hid driver + * hid-logitech-hidpp driver + * + * This driver supports the Nintendo Switch Joy-Cons and Pro Controllers. The + * Pro Controllers can either be used over USB or Bluetooth. + * + * The driver will retrieve the factory calibration info from the controllers, + * so little to no user calibration should be required. + * + */ + +#include "hid-ids.h" +#include +#include +#include +#include +#include +#include + +/* + * Reference the url below for the following HID report defines: + * https://github.com/dekuNukem/Nintendo_Switch_Reverse_Engineering + */ + +/* Output Reports */ +static const u8 JC_OUTPUT_RUMBLE_AND_SUBCMD = 0x01; +static const u8 JC_OUTPUT_FW_UPDATE_PKT = 0x03; +static const u8 JC_OUTPUT_RUMBLE_ONLY = 0x10; +static const u8 JC_OUTPUT_MCU_DATA = 0x11; +static const u8 JC_OUTPUT_USB_CMD = 0x80; + +/* Subcommand IDs */ +static const u8 JC_SUBCMD_STATE /*= 0x00*/; +static const u8 JC_SUBCMD_MANUAL_BT_PAIRING = 0x01; +static const u8 JC_SUBCMD_REQ_DEV_INFO = 0x02; +static const u8 JC_SUBCMD_SET_REPORT_MODE = 0x03; +static const u8 JC_SUBCMD_TRIGGERS_ELAPSED = 0x04; +static const u8 JC_SUBCMD_GET_PAGE_LIST_STATE = 0x05; +static const u8 JC_SUBCMD_SET_HCI_STATE = 0x06; +static const u8 JC_SUBCMD_RESET_PAIRING_INFO = 0x07; +static const u8 JC_SUBCMD_LOW_POWER_MODE = 0x08; +static const u8 JC_SUBCMD_SPI_FLASH_READ = 0x10; +static const u8 JC_SUBCMD_SPI_FLASH_WRITE = 0x11; +static const u8 JC_SUBCMD_RESET_MCU = 0x20; +static const u8 JC_SUBCMD_SET_MCU_CONFIG = 0x21; +static const u8 JC_SUBCMD_SET_MCU_STATE = 0x22; +static const u8 JC_SUBCMD_SET_PLAYER_LIGHTS = 0x30; +static const u8 JC_SUBCMD_GET_PLAYER_LIGHTS = 0x31; +static const u8 JC_SUBCMD_SET_HOME_LIGHT = 0x38; +static const u8 JC_SUBCMD_ENABLE_IMU = 0x40; +static const u8 JC_SUBCMD_SET_IMU_SENSITIVITY = 0x41; +static const u8 JC_SUBCMD_WRITE_IMU_REG = 0x42; +static const u8 JC_SUBCMD_READ_IMU_REG = 0x43; +static const u8 JC_SUBCMD_ENABLE_VIBRATION = 0x48; +static const u8 JC_SUBCMD_GET_REGULATED_VOLTAGE = 0x50; + +/* Input Reports */ +static const u8 JC_INPUT_BUTTON_EVENT = 0x3F; +static const u8 JC_INPUT_SUBCMD_REPLY = 0x21; +static const u8 JC_INPUT_IMU_DATA = 0x30; +static const u8 JC_INPUT_MCU_DATA = 0x31; +static const u8 JC_INPUT_USB_RESPONSE = 0x81; + +/* Feature Reports */ +static const u8 JC_FEATURE_LAST_SUBCMD = 0x02; +static const u8 JC_FEATURE_OTA_FW_UPGRADE = 0x70; +static const u8 JC_FEATURE_SETUP_MEM_READ = 0x71; +static const u8 JC_FEATURE_MEM_READ = 0x72; +static const u8 JC_FEATURE_ERASE_MEM_SECTOR = 0x73; +static const u8 JC_FEATURE_MEM_WRITE = 0x74; +static const u8 JC_FEATURE_LAUNCH = 0x75; + +/* USB Commands */ +static const u8 JC_USB_CMD_CONN_STATUS = 0x01; +static const u8 JC_USB_CMD_HANDSHAKE = 0x02; +static const u8 JC_USB_CMD_BAUDRATE_3M = 0x03; +static const u8 JC_USB_CMD_NO_TIMEOUT = 0x04; +static const u8 JC_USB_CMD_EN_TIMEOUT = 0x05; +static const u8 JC_USB_RESET = 0x06; +static const u8 JC_USB_PRE_HANDSHAKE = 0x91; +static const u8 JC_USB_SEND_UART = 0x92; + +/* SPI storage addresses of factory calibration data */ +static const u16 JC_CAL_DATA_START = 0x603d; +static const u16 JC_CAL_DATA_END = 0x604e; +#define JC_CAL_DATA_SIZE (JC_CAL_DATA_END - JC_CAL_DATA_START + 1) + + +/* The raw analog joystick values will be mapped in terms of this magnitude */ +static const u16 JC_MAX_STICK_MAG = 32767; +static const u16 JC_STICK_FUZZ = 250; +static const u16 JC_STICK_FLAT = 500; + +/* Hat values for pro controller's d-pad */ +static const u16 JC_MAX_DPAD_MAG = 1; +static const u16 JC_DPAD_FUZZ /*= 0*/; +static const u16 JC_DPAD_FLAT /*= 0*/; + +/* States for controller state machine */ +enum joycon_ctlr_state { + JOYCON_CTLR_STATE_INIT, + JOYCON_CTLR_STATE_READ, +}; + +struct joycon_stick_cal { + s32 max; + s32 min; + s32 center; +}; + +/* + * All the controller's button values are stored in a u32. + * They can be accessed with bitwise ANDs. + */ +static const u32 JC_BTN_Y = BIT(0); +static const u32 JC_BTN_X = BIT(1); +static const u32 JC_BTN_B = BIT(2); +static const u32 JC_BTN_A = BIT(3); +static const u32 JC_BTN_SR_R = BIT(4); +static const u32 JC_BTN_SL_R = BIT(5); +static const u32 JC_BTN_R = BIT(6); +static const u32 JC_BTN_ZR = BIT(7); +static const u32 JC_BTN_MINUS = BIT(8); +static const u32 JC_BTN_PLUS = BIT(9); +static const u32 JC_BTN_RSTICK = BIT(10); +static const u32 JC_BTN_LSTICK = BIT(11); +static const u32 JC_BTN_HOME = BIT(12); +static const u32 JC_BTN_CAP = BIT(13); /* capture button */ +static const u32 JC_BTN_DOWN = BIT(16); +static const u32 JC_BTN_UP = BIT(17); +static const u32 JC_BTN_RIGHT = BIT(18); +static const u32 JC_BTN_LEFT = BIT(19); +static const u32 JC_BTN_SR_L = BIT(20); +static const u32 JC_BTN_SL_L = BIT(21); +static const u32 JC_BTN_L = BIT(22); +static const u32 JC_BTN_ZL = BIT(23); + +enum joycon_msg_type { + JOYCON_MSG_TYPE_NONE, + JOYCON_MSG_TYPE_USB, + JOYCON_MSG_TYPE_SUBCMD, +}; + +struct joycon_subcmd_request { + u8 output_id; /* must be 0x01 for subcommand, 0x10 for rumble only */ + u8 packet_num; /* incremented every send */ + u8 rumble_data[8]; + u8 subcmd_id; + u8 data[0]; /* length depends on the subcommand */ +} __packed; + +struct joycon_subcmd_reply { + u8 ack; /* MSB 1 for ACK, 0 for NACK */ + u8 id; /* id of requested subcmd */ + u8 data[0]; /* will be at most 35 bytes */ +} __packed; + +struct joycon_input_report { + u8 id; + u8 timer; + u8 bat_con; /* battery and connection info */ + u8 button_status[3]; + u8 left_stick[3]; + u8 right_stick[3]; + u8 vibrator_report; + + /* + * If support for firmware updates, gyroscope data, and/or NFC/IR + * are added in the future, this can be swapped for a union. + */ + struct joycon_subcmd_reply reply; +} __packed; + +#define JC_MAX_RESP_SIZE (sizeof(struct joycon_input_report) + 35) + +/* Each physical controller is associated with a joycon_ctlr struct */ +struct joycon_ctlr { + struct hid_device *hdev; + struct input_dev *input; + enum joycon_ctlr_state ctlr_state; + + /* The following members are used for synchronous sends/receives */ + enum joycon_msg_type msg_type; + u8 subcmd_num; + struct mutex output_mutex; + u8 input_buf[JC_MAX_RESP_SIZE]; + wait_queue_head_t wait; + bool received_resp; + u8 usb_ack_match; + u8 subcmd_ack_match; + + /* factory calibration data */ + struct joycon_stick_cal left_stick_cal_x; + struct joycon_stick_cal left_stick_cal_y; + struct joycon_stick_cal right_stick_cal_x; + struct joycon_stick_cal right_stick_cal_y; + +}; + +static int __joycon_hid_send(struct hid_device *hdev, u8 *data, size_t len) +{ + u8 *buf; + int ret; + + buf = kmemdup(data, len, GFP_KERNEL); + if (!buf) + return -ENOMEM; + ret = hid_hw_output_report(hdev, buf, len); + kfree(buf); + if (ret < 0) + hid_dbg(hdev, "Failed to send output report ret=%d\n", ret); + return ret; +} + +static int joycon_hid_send_sync(struct joycon_ctlr *ctlr, u8 *data, size_t len) +{ + int ret; + + ret = __joycon_hid_send(ctlr->hdev, data, len); + if (ret < 0) { + memset(ctlr->input_buf, 0, JC_MAX_RESP_SIZE); + return ret; + } + + if (!wait_event_timeout(ctlr->wait, ctlr->received_resp, HZ)) { + hid_dbg(ctlr->hdev, "synchronous send/receive timed out\n"); + memset(ctlr->input_buf, 0, JC_MAX_RESP_SIZE); + return -ETIMEDOUT; + } + + ctlr->received_resp = false; + return 0; +} + +static int joycon_send_usb(struct joycon_ctlr *ctlr, u8 cmd) +{ + int ret; + u8 buf[2] = {JC_OUTPUT_USB_CMD}; + + buf[1] = cmd; + ctlr->usb_ack_match = cmd; + ctlr->msg_type = JOYCON_MSG_TYPE_USB; + ret = joycon_hid_send_sync(ctlr, buf, sizeof(buf)); + if (ret) + hid_dbg(ctlr->hdev, "send usb command failed; ret=%d\n", ret); + return ret; +} + +static int joycon_send_subcmd(struct joycon_ctlr *ctlr, + struct joycon_subcmd_request *subcmd, + size_t data_len) +{ + int ret; + + subcmd->output_id = JC_OUTPUT_RUMBLE_AND_SUBCMD; + subcmd->packet_num = ctlr->subcmd_num; + if (++ctlr->subcmd_num > 0xF) + ctlr->subcmd_num = 0; + ctlr->subcmd_ack_match = subcmd->subcmd_id; + ctlr->msg_type = JOYCON_MSG_TYPE_SUBCMD; + + ret = joycon_hid_send_sync(ctlr, (u8 *)subcmd, + sizeof(*subcmd) + data_len); + if (ret < 0) + hid_dbg(ctlr->hdev, "send subcommand failed; ret=%d\n", ret); + else + ret = 0; + return ret; +} + +/* Supply nibbles for flash and on. Ones correspond to active */ +static int joycon_set_player_leds(struct joycon_ctlr *ctlr, u8 flash, u8 on) +{ + struct joycon_subcmd_request *req; + u8 buffer[sizeof(*req) + 1] = { 0 }; + + req = (struct joycon_subcmd_request *)buffer; + req->subcmd_id = JC_SUBCMD_SET_PLAYER_LIGHTS; + req->data[0] = (flash << 4) | on; + + hid_dbg(ctlr->hdev, "setting player leds\n"); + return joycon_send_subcmd(ctlr, req, 1); +} + +static const u16 DFLT_STICK_CAL_CEN = 2000; +static const u16 DFLT_STICK_CAL_MAX = 3500; +static const u16 DFLT_STICK_CAL_MIN = 500; +static int joycon_request_calibration(struct joycon_ctlr *ctlr) +{ + struct joycon_subcmd_request *req; + u8 buffer[sizeof(*req) + 5] = { 0 }; + struct joycon_input_report *report; + struct joycon_stick_cal *cal_x; + struct joycon_stick_cal *cal_y; + s32 x_max_above; + s32 x_min_below; + s32 y_max_above; + s32 y_min_below; + u8 *data; + u8 *raw_cal; + int ret; + + req = (struct joycon_subcmd_request *)buffer; + req->subcmd_id = JC_SUBCMD_SPI_FLASH_READ; + data = req->data; + data[0] = 0xFF & JC_CAL_DATA_START; + data[1] = 0xFF & (JC_CAL_DATA_START >> 8); + data[2] = 0xFF & (JC_CAL_DATA_START >> 16); + data[3] = 0xFF & (JC_CAL_DATA_START >> 24); + data[4] = JC_CAL_DATA_SIZE; + + hid_dbg(ctlr->hdev, "requesting cal data\n"); + ret = joycon_send_subcmd(ctlr, req, 5); + if (ret) { + hid_warn(ctlr->hdev, + "Failed to read stick cal, using defaults; ret=%d\n", + ret); + + ctlr->left_stick_cal_x.center = DFLT_STICK_CAL_CEN; + ctlr->left_stick_cal_x.max = DFLT_STICK_CAL_MAX; + ctlr->left_stick_cal_x.min = DFLT_STICK_CAL_MIN; + + ctlr->left_stick_cal_y.center = DFLT_STICK_CAL_CEN; + ctlr->left_stick_cal_y.max = DFLT_STICK_CAL_MAX; + ctlr->left_stick_cal_y.min = DFLT_STICK_CAL_MIN; + + ctlr->right_stick_cal_x.center = DFLT_STICK_CAL_CEN; + ctlr->right_stick_cal_x.max = DFLT_STICK_CAL_MAX; + ctlr->right_stick_cal_x.min = DFLT_STICK_CAL_MIN; + + ctlr->right_stick_cal_y.center = DFLT_STICK_CAL_CEN; + ctlr->right_stick_cal_y.max = DFLT_STICK_CAL_MAX; + ctlr->right_stick_cal_y.min = DFLT_STICK_CAL_MIN; + + return ret; + } + + report = (struct joycon_input_report *)ctlr->input_buf; + raw_cal = &report->reply.data[5]; + + /* left stick calibration parsing */ + cal_x = &ctlr->left_stick_cal_x; + cal_y = &ctlr->left_stick_cal_y; + + x_max_above = hid_field_extract(ctlr->hdev, (raw_cal + 0), 0, 12); + y_max_above = hid_field_extract(ctlr->hdev, (raw_cal + 1), 4, 12); + cal_x->center = hid_field_extract(ctlr->hdev, (raw_cal + 3), 0, 12); + cal_y->center = hid_field_extract(ctlr->hdev, (raw_cal + 4), 4, 12); + x_min_below = hid_field_extract(ctlr->hdev, (raw_cal + 6), 0, 12); + y_min_below = hid_field_extract(ctlr->hdev, (raw_cal + 7), 4, 12); + cal_x->max = cal_x->center + x_max_above; + cal_x->min = cal_x->center - x_min_below; + cal_y->max = cal_y->center + y_max_above; + cal_y->min = cal_y->center - y_min_below; + + /* right stick calibration parsing */ + raw_cal += 9; + cal_x = &ctlr->right_stick_cal_x; + cal_y = &ctlr->right_stick_cal_y; + + cal_x->center = hid_field_extract(ctlr->hdev, (raw_cal + 0), 0, 12); + cal_y->center = hid_field_extract(ctlr->hdev, (raw_cal + 1), 4, 12); + x_min_below = hid_field_extract(ctlr->hdev, (raw_cal + 3), 0, 12); + y_min_below = hid_field_extract(ctlr->hdev, (raw_cal + 4), 4, 12); + x_max_above = hid_field_extract(ctlr->hdev, (raw_cal + 6), 0, 12); + y_max_above = hid_field_extract(ctlr->hdev, (raw_cal + 7), 4, 12); + cal_x->max = cal_x->center + x_max_above; + cal_x->min = cal_x->center - x_min_below; + cal_y->max = cal_y->center + y_max_above; + cal_y->min = cal_y->center - y_min_below; + + hid_dbg(ctlr->hdev, "calibration:\n" + "l_x_c=%d l_x_max=%d l_x_min=%d\n" + "l_y_c=%d l_y_max=%d l_y_min=%d\n" + "r_x_c=%d r_x_max=%d r_x_min=%d\n" + "r_y_c=%d r_y_max=%d r_y_min=%d\n", + ctlr->left_stick_cal_x.center, + ctlr->left_stick_cal_x.max, + ctlr->left_stick_cal_x.min, + ctlr->left_stick_cal_y.center, + ctlr->left_stick_cal_y.max, + ctlr->left_stick_cal_y.min, + ctlr->right_stick_cal_x.center, + ctlr->right_stick_cal_x.max, + ctlr->right_stick_cal_x.min, + ctlr->right_stick_cal_y.center, + ctlr->right_stick_cal_y.max, + ctlr->right_stick_cal_y.min); + + return 0; +} + +static int joycon_set_report_mode(struct joycon_ctlr *ctlr) +{ + struct joycon_subcmd_request *req; + u8 buffer[sizeof(*req) + 1] = { 0 }; + + req = (struct joycon_subcmd_request *)buffer; + req->subcmd_id = JC_SUBCMD_SET_REPORT_MODE; + req->data[0] = 0x30; /* standard, full report mode */ + + hid_dbg(ctlr->hdev, "setting controller report mode\n"); + return joycon_send_subcmd(ctlr, req, 1); +} + +static s32 joycon_map_stick_val(struct joycon_stick_cal *cal, s32 val) +{ + s32 center = cal->center; + s32 min = cal->min; + s32 max = cal->max; + s32 new_val; + + if (val > center) { + new_val = (val - center) * JC_MAX_STICK_MAG; + new_val /= (max - center); + } else { + new_val = (center - val) * -JC_MAX_STICK_MAG; + new_val /= (center - min); + } + new_val = clamp(new_val, (s32)-JC_MAX_STICK_MAG, (s32)JC_MAX_STICK_MAG); + return new_val; +} + +static void joycon_parse_report(struct joycon_ctlr *ctlr, + struct joycon_input_report *rep) +{ + struct input_dev *dev = ctlr->input; + u32 btns; + u32 id = ctlr->hdev->product; + + btns = hid_field_extract(ctlr->hdev, rep->button_status, 0, 24); + + if (id != USB_DEVICE_ID_NINTENDO_JOYCONR) { + u16 raw_x; + u16 raw_y; + s32 x; + s32 y; + + /* get raw stick values */ + raw_x = hid_field_extract(ctlr->hdev, rep->left_stick, 0, 12); + raw_y = hid_field_extract(ctlr->hdev, + rep->left_stick + 1, 4, 12); + /* map the stick values */ + x = joycon_map_stick_val(&ctlr->left_stick_cal_x, raw_x); + y = -joycon_map_stick_val(&ctlr->left_stick_cal_y, raw_y); + /* report sticks */ + input_report_abs(dev, ABS_X, x); + input_report_abs(dev, ABS_Y, y); + + /* report buttons */ + input_report_key(dev, BTN_TL, btns & JC_BTN_L); + input_report_key(dev, BTN_TL2, btns & JC_BTN_ZL); + input_report_key(dev, BTN_SELECT, btns & JC_BTN_MINUS); + input_report_key(dev, BTN_THUMBL, btns & JC_BTN_LSTICK); + input_report_key(dev, BTN_Z, btns & JC_BTN_CAP); + + if (id != USB_DEVICE_ID_NINTENDO_PROCON) { + /* Report the S buttons as the non-existent triggers */ + input_report_key(dev, BTN_TR, btns & JC_BTN_SL_L); + input_report_key(dev, BTN_TR2, btns & JC_BTN_SR_L); + + /* Report d-pad as digital buttons for the joy-cons */ + input_report_key(dev, BTN_DPAD_DOWN, + btns & JC_BTN_DOWN); + input_report_key(dev, BTN_DPAD_UP, btns & JC_BTN_UP); + input_report_key(dev, BTN_DPAD_RIGHT, + btns & JC_BTN_RIGHT); + input_report_key(dev, BTN_DPAD_LEFT, + btns & JC_BTN_LEFT); + } else { + int hatx = 0; + int haty = 0; + + /* d-pad x */ + if (btns & JC_BTN_LEFT) + hatx = -1; + else if (btns & JC_BTN_RIGHT) + hatx = 1; + input_report_abs(dev, ABS_HAT0X, hatx); + + /* d-pad y */ + if (btns & JC_BTN_UP) + haty = -1; + else if (btns & JC_BTN_DOWN) + haty = 1; + input_report_abs(dev, ABS_HAT0Y, haty); + } + } + if (id != USB_DEVICE_ID_NINTENDO_JOYCONL) { + u16 raw_x; + u16 raw_y; + s32 x; + s32 y; + + /* get raw stick values */ + raw_x = hid_field_extract(ctlr->hdev, rep->right_stick, 0, 12); + raw_y = hid_field_extract(ctlr->hdev, + rep->right_stick + 1, 4, 12); + /* map stick values */ + x = joycon_map_stick_val(&ctlr->right_stick_cal_x, raw_x); + y = -joycon_map_stick_val(&ctlr->right_stick_cal_y, raw_y); + /* report sticks */ + input_report_abs(dev, ABS_RX, x); + input_report_abs(dev, ABS_RY, y); + + /* report buttons */ + input_report_key(dev, BTN_TR, btns & JC_BTN_R); + input_report_key(dev, BTN_TR2, btns & JC_BTN_ZR); + if (id != USB_DEVICE_ID_NINTENDO_PROCON) { + /* Report the S buttons as the non-existent triggers */ + input_report_key(dev, BTN_TL, btns & JC_BTN_SL_R); + input_report_key(dev, BTN_TL2, btns & JC_BTN_SR_R); + } + input_report_key(dev, BTN_START, btns & JC_BTN_PLUS); + input_report_key(dev, BTN_THUMBR, btns & JC_BTN_RSTICK); + input_report_key(dev, BTN_MODE, btns & JC_BTN_HOME); + input_report_key(dev, BTN_WEST, btns & JC_BTN_Y); + input_report_key(dev, BTN_NORTH, btns & JC_BTN_X); + input_report_key(dev, BTN_EAST, btns & JC_BTN_A); + input_report_key(dev, BTN_SOUTH, btns & JC_BTN_B); + } + + input_sync(dev); +} + + +static const unsigned int joycon_button_inputs_l[] = { + BTN_SELECT, BTN_Z, BTN_THUMBL, + BTN_TL, BTN_TL2, + 0 /* 0 signals end of array */ +}; + +static const unsigned int joycon_button_inputs_r[] = { + BTN_START, BTN_MODE, BTN_THUMBR, + BTN_SOUTH, BTN_EAST, BTN_NORTH, BTN_WEST, + BTN_TR, BTN_TR2, + 0 /* 0 signals end of array */ +}; + +/* We report joy-con d-pad inputs as buttons and pro controller as a hat. */ +static const unsigned int joycon_dpad_inputs_jc[] = { + BTN_DPAD_UP, BTN_DPAD_DOWN, BTN_DPAD_LEFT, BTN_DPAD_RIGHT, +}; + +static DEFINE_MUTEX(joycon_input_num_mutex); +static int joycon_input_create(struct joycon_ctlr *ctlr) +{ + struct hid_device *hdev; + static int input_num = 1; + const char *name; + int ret; + int i; + + hdev = ctlr->hdev; + + switch (hdev->product) { + case USB_DEVICE_ID_NINTENDO_PROCON: + name = "Nintendo Switch Pro Controller"; + break; + case USB_DEVICE_ID_NINTENDO_JOYCONL: + name = "Nintendo Switch Left Joy-Con"; + break; + case USB_DEVICE_ID_NINTENDO_JOYCONR: + name = "Nintendo Switch Right Joy-Con"; + break; + default: /* Should be impossible */ + hid_err(hdev, "Invalid hid product\n"); + return -EINVAL; + } + + ctlr->input = devm_input_allocate_device(&hdev->dev); + if (!ctlr->input) + return -ENOMEM; + ctlr->input->id.bustype = hdev->bus; + ctlr->input->id.vendor = hdev->vendor; + ctlr->input->id.product = hdev->product; + ctlr->input->id.version = hdev->version; + ctlr->input->name = name; + input_set_drvdata(ctlr->input, ctlr); + + + /* set up sticks and buttons */ + if (hdev->product != USB_DEVICE_ID_NINTENDO_JOYCONR) { + input_set_abs_params(ctlr->input, ABS_X, + -JC_MAX_STICK_MAG, JC_MAX_STICK_MAG, + JC_STICK_FUZZ, JC_STICK_FLAT); + input_set_abs_params(ctlr->input, ABS_Y, + -JC_MAX_STICK_MAG, JC_MAX_STICK_MAG, + JC_STICK_FUZZ, JC_STICK_FLAT); + + for (i = 0; joycon_button_inputs_l[i] > 0; i++) + input_set_capability(ctlr->input, EV_KEY, + joycon_button_inputs_l[i]); + + /* configure d-pad differently for joy-con vs pro controller */ + if (hdev->product != USB_DEVICE_ID_NINTENDO_PROCON) { + for (i = 0; joycon_dpad_inputs_jc[i] > 0; i++) + input_set_capability(ctlr->input, EV_KEY, + joycon_dpad_inputs_jc[i]); + } else { + input_set_abs_params(ctlr->input, ABS_HAT0X, + -JC_MAX_DPAD_MAG, JC_MAX_DPAD_MAG, + JC_DPAD_FUZZ, JC_DPAD_FLAT); + input_set_abs_params(ctlr->input, ABS_HAT0Y, + -JC_MAX_DPAD_MAG, JC_MAX_DPAD_MAG, + JC_DPAD_FUZZ, JC_DPAD_FLAT); + } + } + if (hdev->product != USB_DEVICE_ID_NINTENDO_JOYCONL) { + input_set_abs_params(ctlr->input, ABS_RX, + -JC_MAX_STICK_MAG, JC_MAX_STICK_MAG, + JC_STICK_FUZZ, JC_STICK_FLAT); + input_set_abs_params(ctlr->input, ABS_RY, + -JC_MAX_STICK_MAG, JC_MAX_STICK_MAG, + JC_STICK_FUZZ, JC_STICK_FLAT); + + for (i = 0; joycon_button_inputs_r[i] > 0; i++) + input_set_capability(ctlr->input, EV_KEY, + joycon_button_inputs_r[i]); + } + + /* Let's report joy-con S triggers separately */ + if (hdev->product == USB_DEVICE_ID_NINTENDO_JOYCONL) { + input_set_capability(ctlr->input, EV_KEY, BTN_TR); + input_set_capability(ctlr->input, EV_KEY, BTN_TR2); + } else if (hdev->product == USB_DEVICE_ID_NINTENDO_JOYCONR) { + input_set_capability(ctlr->input, EV_KEY, BTN_TL); + input_set_capability(ctlr->input, EV_KEY, BTN_TL2); + } + + ret = input_register_device(ctlr->input); + if (ret) + return ret; + + /* Set the default controller player leds based on controller number */ + mutex_lock(&joycon_input_num_mutex); + mutex_lock(&ctlr->output_mutex); + ret = joycon_set_player_leds(ctlr, 0, 0xF >> (4 - input_num)); + if (ret) + hid_warn(ctlr->hdev, "Failed to set leds; ret=%d\n", ret); + mutex_unlock(&ctlr->output_mutex); + if (++input_num > 4) + input_num = 1; + mutex_unlock(&joycon_input_num_mutex); + + return 0; +} + +/* Common handler for parsing inputs */ +static int joycon_ctlr_read_handler(struct joycon_ctlr *ctlr, u8 *data, + int size) +{ + int ret = 0; + + if (data[0] == JC_INPUT_SUBCMD_REPLY || data[0] == JC_INPUT_IMU_DATA || + data[0] == JC_INPUT_MCU_DATA) { + if (size >= 12) /* make sure it contains the input report */ + joycon_parse_report(ctlr, + (struct joycon_input_report *)data); + } + + return ret; +} + +static int joycon_ctlr_handle_event(struct joycon_ctlr *ctlr, u8 *data, + int size) +{ + int ret = 0; + bool match = false; + struct joycon_input_report *report; + + if (unlikely(mutex_is_locked(&ctlr->output_mutex)) && + ctlr->msg_type != JOYCON_MSG_TYPE_NONE) { + switch (ctlr->msg_type) { + case JOYCON_MSG_TYPE_USB: + if (size < 2) + break; + if (data[0] == JC_INPUT_USB_RESPONSE && + data[1] == ctlr->usb_ack_match) + match = true; + break; + case JOYCON_MSG_TYPE_SUBCMD: + if (size < sizeof(struct joycon_input_report) || + data[0] != JC_INPUT_SUBCMD_REPLY) + break; + report = (struct joycon_input_report *)data; + if (report->reply.id == ctlr->subcmd_ack_match) + match = true; + break; + default: + break; + } + + if (match) { + memcpy(ctlr->input_buf, data, + min(size, (int)JC_MAX_RESP_SIZE)); + ctlr->msg_type = JOYCON_MSG_TYPE_NONE; + ctlr->received_resp = true; + wake_up(&ctlr->wait); + + /* This message has been handled */ + return 1; + } + } + + if (ctlr->ctlr_state == JOYCON_CTLR_STATE_READ) + ret = joycon_ctlr_read_handler(ctlr, data, size); + + return ret; +} + +static int nintendo_hid_event(struct hid_device *hdev, + struct hid_report *report, u8 *raw_data, int size) +{ + struct joycon_ctlr *ctlr = hid_get_drvdata(hdev); + + if (size < 1) + return -EINVAL; + + return joycon_ctlr_handle_event(ctlr, raw_data, size); +} + +static int nintendo_hid_probe(struct hid_device *hdev, + const struct hid_device_id *id) +{ + int ret; + struct joycon_ctlr *ctlr; + + hid_dbg(hdev, "probe - start\n"); + + ctlr = devm_kzalloc(&hdev->dev, sizeof(*ctlr), GFP_KERNEL); + if (!ctlr) { + ret = -ENOMEM; + goto err; + } + + ctlr->hdev = hdev; + ctlr->ctlr_state = JOYCON_CTLR_STATE_INIT; + hid_set_drvdata(hdev, ctlr); + mutex_init(&ctlr->output_mutex); + init_waitqueue_head(&ctlr->wait); + + ret = hid_parse(hdev); + if (ret) { + hid_err(hdev, "HID parse failed\n"); + goto err; + } + + ret = hid_hw_start(hdev, HID_CONNECT_HIDRAW); + if (ret) { + hid_err(hdev, "HW start failed\n"); + goto err; + } + + ret = hid_hw_open(hdev); + if (ret) { + hid_err(hdev, "cannot start hardware I/O\n"); + goto err_stop; + } + + hid_device_io_start(hdev); + + /* Initialize the controller */ + mutex_lock(&ctlr->output_mutex); + /* if handshake command fails, assume ble pro controller */ + if (hdev->product == USB_DEVICE_ID_NINTENDO_PROCON && + !joycon_send_usb(ctlr, JC_USB_CMD_HANDSHAKE)) { + hid_dbg(hdev, "detected USB controller\n"); + /* set baudrate for improved latency */ + ret = joycon_send_usb(ctlr, JC_USB_CMD_BAUDRATE_3M); + if (ret) { + hid_err(hdev, "Failed to set baudrate; ret=%d\n", ret); + goto err_mutex; + } + /* handshake */ + ret = joycon_send_usb(ctlr, JC_USB_CMD_HANDSHAKE); + if (ret) { + hid_err(hdev, "Failed handshake; ret=%d\n", ret); + goto err_mutex; + } + /* + * Set no timeout (to keep controller in USB mode). + * This doesn't send a response, so ignore the timeout. + */ + joycon_send_usb(ctlr, JC_USB_CMD_NO_TIMEOUT); + } + + /* get controller calibration data, and parse it */ + ret = joycon_request_calibration(ctlr); + if (ret) { + /* + * We can function with default calibration, but it may be + * inaccurate. Provide a warning, and continue on. + */ + hid_warn(hdev, "Analog stick positions may be inaccurate\n"); + } + + /* Set the reporting mode to 0x30, which is the full report mode */ + ret = joycon_set_report_mode(ctlr); + if (ret) { + hid_err(hdev, "Failed to set report mode; ret=%d\n", ret); + goto err_mutex; + } + + mutex_unlock(&ctlr->output_mutex); + + ret = joycon_input_create(ctlr); + if (ret) { + hid_err(hdev, "Failed to create input device; ret=%d\n", ret); + goto err_close; + } + + ctlr->ctlr_state = JOYCON_CTLR_STATE_READ; + + hid_dbg(hdev, "probe - success\n"); + return 0; + +err_mutex: + mutex_unlock(&ctlr->output_mutex); +err_close: + hid_hw_close(hdev); +err_stop: + hid_hw_stop(hdev); +err: + hid_err(hdev, "probe - fail = %d\n", ret); + return ret; +} + +static void nintendo_hid_remove(struct hid_device *hdev) +{ + hid_dbg(hdev, "remove\n"); + hid_hw_close(hdev); + hid_hw_stop(hdev); +} + +static const struct hid_device_id nintendo_hid_devices[] = { + { HID_USB_DEVICE(USB_VENDOR_ID_NINTENDO, + USB_DEVICE_ID_NINTENDO_PROCON) }, + { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_NINTENDO, + USB_DEVICE_ID_NINTENDO_PROCON) }, + { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_NINTENDO, + USB_DEVICE_ID_NINTENDO_JOYCONL) }, + { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_NINTENDO, + USB_DEVICE_ID_NINTENDO_JOYCONR) }, + { } +}; +MODULE_DEVICE_TABLE(hid, nintendo_hid_devices); + +static struct hid_driver nintendo_hid_driver = { + .name = "nintendo", + .id_table = nintendo_hid_devices, + .probe = nintendo_hid_probe, + .remove = nintendo_hid_remove, + .raw_event = nintendo_hid_event, +}; +module_hid_driver(nintendo_hid_driver); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Daniel J. Ogorchock "); +MODULE_DESCRIPTION("Driver for Nintendo Switch Controllers"); From patchwork Sun Aug 23 04:41:45 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Daniel Ogorchock X-Patchwork-Id: 11731365 X-Patchwork-Delegate: jikos@jikos.cz Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id AC26C1731 for ; Sun, 23 Aug 2020 04:42:30 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 8A85D20720 for ; Sun, 23 Aug 2020 04:42:30 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b="QMM+NGtJ" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1725920AbgHWEmX (ORCPT ); Sun, 23 Aug 2020 00:42:23 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:59388 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1725139AbgHWEmV (ORCPT ); Sun, 23 Aug 2020 00:42:21 -0400 Received: from mail-oi1-x241.google.com (mail-oi1-x241.google.com [IPv6:2607:f8b0:4864:20::241]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id F4074C061573 for ; Sat, 22 Aug 2020 21:42:20 -0700 (PDT) Received: by mail-oi1-x241.google.com with SMTP id j18so456033oig.5 for ; Sat, 22 Aug 2020 21:42:20 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20161025; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=NFqTVUs5L3EcLpY9b87NYhKi/88bk8yTv3cGSYNZo8M=; b=QMM+NGtJ7xxJdKGjL5gRSmCbEOrxh19kgJLyMn360JQuwljExHYQjXReiuqeAGigx/ vizRVHse+BXnAXPgKuOke6j2tRh/dS+8Odbaxyk5aEquWN3zPHScgqBqw4dF+XWR7ZBd UXXTa30A2GtWJ0YUR8wZOoLDveDT7S5aLfqI527dilJPs9+uKvfVwI8c3gX5sBSl8CrF 1xnx/ZqiT+iA5Q9AZHZl8svSKBv+d+KU0Ue1dNSV219qU/9lKIUWDNc6wYEMrW1tAzsn z9OjWlC1qHxqP5mVCpEkFFM4uTlIZBfvHXeQFxwOz0mCOhJH4FyAg1tq4SVmzmlasaoP Nbzg== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=NFqTVUs5L3EcLpY9b87NYhKi/88bk8yTv3cGSYNZo8M=; b=Gx/HB0KSHwgoC7sa1SiyDGq48b9AWgRuB/I/+El1cKpK/LnhGlAUb+sw7xvgAnyaB3 ViJ8cbvLQLt3uXPCXvwZy4i/p/U0nvsImJjQTYu6IsMsLjUqBMhTkgkambS7U+XMCYgX fkgSuipoKVmZm6GK+Qjlm5OaiScvbNf1cvnJzlzvH9zii8GNtrFg6UOUbVdrwL8DXubX OUPXjY9KcPJtCQXV7/JkiSuLBobPGG8rqgb3OZ8/vdN+6hDDITgUNTLr2AxvC1arEDSK Pzg+Q1fjTpvfoxyiKvjpKM5AxzTEifKUUzj/lRdzwrRACS7DGKz8wM9ypREafWgn23EP KcHg== X-Gm-Message-State: AOAM533Z9qr5E6r8yx6pRUJB9oD60b17NgH719BdD5MkLzZ0evWzMzS6 RaSPgFX8Inbf+faAtcVUBuwN0J/GtRJVsZ36 X-Google-Smtp-Source: ABdhPJwR5VamJtNcgYTz9ELwE2LJolwn6QDDA90fVcQAdGNGiRkcJOmyWhL0ftMGUo9BjkPBGa+jEA== X-Received: by 2002:aca:4d48:: with SMTP id a69mr110003oib.39.1598157740068; Sat, 22 Aug 2020 21:42:20 -0700 (PDT) Received: from Arrakis.djogorchock.com ([136.33.205.58]) by smtp.gmail.com with ESMTPSA id z10sm1308572otk.6.2020.08.22.21.42.19 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Sat, 22 Aug 2020 21:42:19 -0700 (PDT) From: "Daniel J. Ogorchock" To: linux-input@vger.kernel.org Cc: thunderbird2k@gmail.com, blaws05@gmail.com, benjamin.tissoires@redhat.com, jikos@kernel.org, Roderick.Colenbrander@sony.com, svv@google.com, s.jegen@gmail.com, carmueller@gmail.com, pgriffais@valvesoftware.com, hadess@hadess.net, "Daniel J. Ogorchock" Subject: [PATCH v12 02/14] HID: nintendo: add player led support Date: Sat, 22 Aug 2020 23:41:45 -0500 Message-Id: <20200823044157.339677-3-djogorchock@gmail.com> X-Mailer: git-send-email 2.28.0 In-Reply-To: <20200823044157.339677-1-djogorchock@gmail.com> References: <20200823044157.339677-1-djogorchock@gmail.com> MIME-Version: 1.0 Sender: linux-input-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-input@vger.kernel.org This patch adds led_classdev functionality to the switch controller driver. It adds support for the 4 player LEDs. The Home Button LED still needs to be supported on the pro controllers and right joy-con. Signed-off-by: Daniel J. Ogorchock --- drivers/hid/Kconfig | 2 + drivers/hid/hid-nintendo.c | 95 +++++++++++++++++++++++++++++++++++++- 2 files changed, 95 insertions(+), 2 deletions(-) diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig index b5cd42ed3b04..af4d543c0ff9 100644 --- a/drivers/hid/Kconfig +++ b/drivers/hid/Kconfig @@ -713,6 +713,8 @@ config HID_MULTITOUCH config HID_NINTENDO tristate "Nintendo Joy-Con and Pro Controller support" depends on HID + depends on NEW_LEDS + depends on LEDS_CLASS help Adds support for the Nintendo Switch Joy-Cons and Pro Controller. All controllers support bluetooth, and the Pro Controller also supports diff --git a/drivers/hid/hid-nintendo.c b/drivers/hid/hid-nintendo.c index 7273ddf033e2..c3eec9b7c99c 100644 --- a/drivers/hid/hid-nintendo.c +++ b/drivers/hid/hid-nintendo.c @@ -25,6 +25,7 @@ #include #include #include +#include #include #include @@ -183,11 +184,13 @@ struct joycon_input_report { } __packed; #define JC_MAX_RESP_SIZE (sizeof(struct joycon_input_report) + 35) +#define JC_NUM_LEDS 4 /* Each physical controller is associated with a joycon_ctlr struct */ struct joycon_ctlr { struct hid_device *hdev; struct input_dev *input; + struct led_classdev leds[JC_NUM_LEDS]; enum joycon_ctlr_state ctlr_state; /* The following members are used for synchronous sends/receives */ @@ -553,11 +556,9 @@ static const unsigned int joycon_dpad_inputs_jc[] = { BTN_DPAD_UP, BTN_DPAD_DOWN, BTN_DPAD_LEFT, BTN_DPAD_RIGHT, }; -static DEFINE_MUTEX(joycon_input_num_mutex); static int joycon_input_create(struct joycon_ctlr *ctlr) { struct hid_device *hdev; - static int input_num = 1; const char *name; int ret; int i; @@ -643,6 +644,66 @@ static int joycon_input_create(struct joycon_ctlr *ctlr) if (ret) return ret; + return 0; +} + +static int joycon_player_led_brightness_set(struct led_classdev *led, + enum led_brightness brightness) +{ + struct device *dev = led->dev->parent; + struct hid_device *hdev = to_hid_device(dev); + struct joycon_ctlr *ctlr; + int val = 0; + int i; + int ret; + int num; + + ctlr = hid_get_drvdata(hdev); + if (!ctlr) { + hid_err(hdev, "No controller data\n"); + return -ENODEV; + } + + /* determine which player led this is */ + for (num = 0; num < JC_NUM_LEDS; num++) { + if (&ctlr->leds[num] == led) + break; + } + if (num >= JC_NUM_LEDS) + return -EINVAL; + + mutex_lock(&ctlr->output_mutex); + for (i = 0; i < JC_NUM_LEDS; i++) { + if (i == num) + val |= brightness << i; + else + val |= ctlr->leds[i].brightness << i; + } + ret = joycon_set_player_leds(ctlr, 0, val); + mutex_unlock(&ctlr->output_mutex); + + return ret; +} + +static const char * const joycon_player_led_names[] = { + "player1", + "player2", + "player3", + "player4" +}; + +static DEFINE_MUTEX(joycon_input_num_mutex); +static int joycon_player_leds_create(struct joycon_ctlr *ctlr) +{ + struct hid_device *hdev = ctlr->hdev; + struct device *dev = &hdev->dev; + const char *d_name = dev_name(dev); + struct led_classdev *led; + char *name; + int ret = 0; + int i; + static int input_num = 1; + /* Set the default controller player leds based on controller number */ mutex_lock(&joycon_input_num_mutex); mutex_lock(&ctlr->output_mutex); @@ -650,6 +711,29 @@ static int joycon_input_create(struct joycon_ctlr *ctlr) if (ret) hid_warn(ctlr->hdev, "Failed to set leds; ret=%d\n", ret); mutex_unlock(&ctlr->output_mutex); + + /* configure the player LEDs */ + for (i = 0; i < JC_NUM_LEDS; i++) { + name = devm_kasprintf(dev, GFP_KERNEL, "%s:%s", d_name, + joycon_player_led_names[i]); + if (!name) + return -ENOMEM; + + led = &ctlr->leds[i]; + led->name = name; + led->brightness = ((i + 1) <= input_num) ? LED_ON : LED_OFF; + led->max_brightness = LED_ON; + led->brightness_set_blocking = + joycon_player_led_brightness_set; + led->flags = LED_CORE_SUSPENDRESUME | LED_HW_PLUGGABLE; + + ret = devm_led_classdev_register(&hdev->dev, led); + if (ret) { + hid_err(hdev, "Failed registering %s LED\n", led->name); + break; + } + } + if (++input_num > 4) input_num = 1; mutex_unlock(&joycon_input_num_mutex); @@ -815,6 +899,13 @@ static int nintendo_hid_probe(struct hid_device *hdev, mutex_unlock(&ctlr->output_mutex); + /* Initialize the leds */ + ret = joycon_player_leds_create(ctlr); + if (ret) { + hid_err(hdev, "Failed to create leds; ret=%d\n", ret); + goto err_close; + } + ret = joycon_input_create(ctlr); if (ret) { hid_err(hdev, "Failed to create input device; ret=%d\n", ret); From patchwork Sun Aug 23 04:41:46 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Daniel Ogorchock X-Patchwork-Id: 11731369 X-Patchwork-Delegate: jikos@jikos.cz Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id F16C11575 for ; Sun, 23 Aug 2020 04:42:30 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id D46AA20720 for ; Sun, 23 Aug 2020 04:42:30 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b="WskkDlLx" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726158AbgHWEm3 (ORCPT ); Sun, 23 Aug 2020 00:42:29 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:59396 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1725876AbgHWEmW (ORCPT ); Sun, 23 Aug 2020 00:42:22 -0400 Received: from mail-ot1-x344.google.com (mail-ot1-x344.google.com [IPv6:2607:f8b0:4864:20::344]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 1BEE6C061575 for ; Sat, 22 Aug 2020 21:42:22 -0700 (PDT) Received: by mail-ot1-x344.google.com with SMTP id h22so4700393otq.11 for ; Sat, 22 Aug 2020 21:42:22 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20161025; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=+andDZvGh4XVuscHYM0uu8KisNNna3suqTjarUnW7Dg=; b=WskkDlLxoln+TZ26eIGrELDiSS6U4JxpLfvhMLL3CToVbvJka/4fAxPnQ/SOKMU8+c 7MsIt/Tfof2quUcfKySpV+7fzTEfu2B9OpFirnRQNjQ0F5N6SC37dlrtKbxuhZuCfZTP xGYV/Hc5XHy4M03VMeHjzB+ZwTrbVNkJiauSRqGzAKWGw0DMFrXVuPVj8+pkA0EaJ4Wb 2zuyjAf6k+wU2AS6ZPeqt0BgssubAi812SqLpT1IQVJ6fE5JUer6DbMGpgR3U3Ht1xkv f1U2FDybyQDaH0VWvZHl9M9hvjDfyf5xryfU6dsOntX1KhvilZzWa7EgVeOhLwytEhmQ xoEg== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=+andDZvGh4XVuscHYM0uu8KisNNna3suqTjarUnW7Dg=; b=OMZIwOo8f7E7WvqJdkrz0+++V2lzl5UXvDHjnBlgdVZNkGhk295+1DHBP3qNWnPUMs PSVBlnmX7XG2XZFbP+rVSumgRomx0n4lrUfQJWQTicyG24Uh+sb4zWSLzEfzs2Vdko5U S7sMvH85ylXOf012CSHi7cfAYNAxIM/9Z1GnL1Df982qTKABykVAsDD51rmAONPH9Guu afgq4lLb8a0FZobsiCVIxdLoEz3wi3f7ToAVdYFpoWHhIUJfKR+d+KZpjqPHlQPnQxTN JK+jPHWbewyseRZ5dgOq9tJiH32OzF65/mHRNqmNpdjgYy4JbzC3oHcM+8V7aDI21kyE 8kvA== X-Gm-Message-State: AOAM531yLfbu2I8NFl6tXbgrxU+SKKa67fb6slNjCDnZyA5vCJJZ86ao ROuqEmZH3TiootDTgHJ0D0jnAPBsmX4DIxyb X-Google-Smtp-Source: ABdhPJzeDUiBJVLtaQH0DamIG0SdpV2kaifdl1DeSyLEQwsyTzM5FYhCUF1BXtakiPvzdAI/Afr3mQ== X-Received: by 2002:a05:6830:1c65:: with SMTP id s5mr268013otg.264.1598157741177; Sat, 22 Aug 2020 21:42:21 -0700 (PDT) Received: from Arrakis.djogorchock.com ([136.33.205.58]) by smtp.gmail.com with ESMTPSA id z10sm1308572otk.6.2020.08.22.21.42.20 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Sat, 22 Aug 2020 21:42:20 -0700 (PDT) From: "Daniel J. Ogorchock" To: linux-input@vger.kernel.org Cc: thunderbird2k@gmail.com, blaws05@gmail.com, benjamin.tissoires@redhat.com, jikos@kernel.org, Roderick.Colenbrander@sony.com, svv@google.com, s.jegen@gmail.com, carmueller@gmail.com, pgriffais@valvesoftware.com, hadess@hadess.net, "Daniel J. Ogorchock" Subject: [PATCH v12 03/14] HID: nintendo: add power supply support Date: Sat, 22 Aug 2020 23:41:46 -0500 Message-Id: <20200823044157.339677-4-djogorchock@gmail.com> X-Mailer: git-send-email 2.28.0 In-Reply-To: <20200823044157.339677-1-djogorchock@gmail.com> References: <20200823044157.339677-1-djogorchock@gmail.com> MIME-Version: 1.0 Sender: linux-input-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-input@vger.kernel.org This patch adds power_supply functionality to the switch controller driver for its battery. Signed-off-by: Daniel J. Ogorchock --- drivers/hid/Kconfig | 1 + drivers/hid/hid-nintendo.c | 134 +++++++++++++++++++++++++++++++++++++ 2 files changed, 135 insertions(+) diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig index af4d543c0ff9..c05bfb6ac577 100644 --- a/drivers/hid/Kconfig +++ b/drivers/hid/Kconfig @@ -715,6 +715,7 @@ config HID_NINTENDO depends on HID depends on NEW_LEDS depends on LEDS_CLASS + select POWER_SUPPLY help Adds support for the Nintendo Switch Joy-Cons and Pro Controller. All controllers support bluetooth, and the Pro Controller also supports diff --git a/drivers/hid/hid-nintendo.c b/drivers/hid/hid-nintendo.c index c3eec9b7c99c..adecd6790fe9 100644 --- a/drivers/hid/hid-nintendo.c +++ b/drivers/hid/hid-nintendo.c @@ -11,6 +11,7 @@ * https://github.com/MTCKC/ProconXInput * hid-wiimote kernel hid driver * hid-logitech-hidpp driver + * hid-sony driver * * This driver supports the Nintendo Switch Joy-Cons and Pro Controllers. The * Pro Controllers can either be used over USB or Bluetooth. @@ -27,6 +28,7 @@ #include #include #include +#include #include /* @@ -192,6 +194,7 @@ struct joycon_ctlr { struct input_dev *input; struct led_classdev leds[JC_NUM_LEDS]; enum joycon_ctlr_state ctlr_state; + spinlock_t lock; /* The following members are used for synchronous sends/receives */ enum joycon_msg_type msg_type; @@ -209,6 +212,12 @@ struct joycon_ctlr { struct joycon_stick_cal right_stick_cal_x; struct joycon_stick_cal right_stick_cal_y; + /* power supply data */ + struct power_supply *battery; + struct power_supply_desc battery_desc; + u8 battery_capacity; + bool battery_charging; + bool host_powered; }; static int __joycon_hid_send(struct hid_device *hdev, u8 *data, size_t len) @@ -439,9 +448,41 @@ static void joycon_parse_report(struct joycon_ctlr *ctlr, struct joycon_input_report *rep) { struct input_dev *dev = ctlr->input; + unsigned long flags; + u8 tmp; u32 btns; u32 id = ctlr->hdev->product; + /* Parse the battery status */ + tmp = rep->bat_con; + spin_lock_irqsave(&ctlr->lock, flags); + ctlr->host_powered = tmp & BIT(0); + ctlr->battery_charging = tmp & BIT(4); + tmp = tmp >> 5; + switch (tmp) { + case 0: /* empty */ + ctlr->battery_capacity = POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL; + break; + case 1: /* low */ + ctlr->battery_capacity = POWER_SUPPLY_CAPACITY_LEVEL_LOW; + break; + case 2: /* medium */ + ctlr->battery_capacity = POWER_SUPPLY_CAPACITY_LEVEL_NORMAL; + break; + case 3: /* high */ + ctlr->battery_capacity = POWER_SUPPLY_CAPACITY_LEVEL_HIGH; + break; + case 4: /* full */ + ctlr->battery_capacity = POWER_SUPPLY_CAPACITY_LEVEL_FULL; + break; + default: + ctlr->battery_capacity = POWER_SUPPLY_CAPACITY_LEVEL_UNKNOWN; + hid_warn(ctlr->hdev, "Invalid battery status\n"); + break; + } + spin_unlock_irqrestore(&ctlr->lock, flags); + + /* Parse the buttons and sticks */ btns = hid_field_extract(ctlr->hdev, rep->button_status, 0, 24); if (id != USB_DEVICE_ID_NINTENDO_JOYCONR) { @@ -741,6 +782,91 @@ static int joycon_player_leds_create(struct joycon_ctlr *ctlr) return 0; } +static int joycon_battery_get_property(struct power_supply *supply, + enum power_supply_property prop, + union power_supply_propval *val) +{ + struct joycon_ctlr *ctlr = power_supply_get_drvdata(supply); + unsigned long flags; + int ret = 0; + u8 capacity; + bool charging; + bool powered; + + spin_lock_irqsave(&ctlr->lock, flags); + capacity = ctlr->battery_capacity; + charging = ctlr->battery_charging; + powered = ctlr->host_powered; + spin_unlock_irqrestore(&ctlr->lock, flags); + + switch (prop) { + case POWER_SUPPLY_PROP_PRESENT: + val->intval = 1; + break; + case POWER_SUPPLY_PROP_SCOPE: + val->intval = POWER_SUPPLY_SCOPE_DEVICE; + break; + case POWER_SUPPLY_PROP_CAPACITY_LEVEL: + val->intval = capacity; + break; + case POWER_SUPPLY_PROP_STATUS: + if (charging) + val->intval = POWER_SUPPLY_STATUS_CHARGING; + else if (capacity == POWER_SUPPLY_CAPACITY_LEVEL_FULL && + powered) + val->intval = POWER_SUPPLY_STATUS_FULL; + else + val->intval = POWER_SUPPLY_STATUS_DISCHARGING; + break; + default: + ret = -EINVAL; + break; + } + return ret; +} + +static enum power_supply_property joycon_battery_props[] = { + POWER_SUPPLY_PROP_PRESENT, + POWER_SUPPLY_PROP_CAPACITY_LEVEL, + POWER_SUPPLY_PROP_SCOPE, + POWER_SUPPLY_PROP_STATUS, +}; + +static int joycon_power_supply_create(struct joycon_ctlr *ctlr) +{ + struct hid_device *hdev = ctlr->hdev; + struct power_supply_config supply_config = { .drv_data = ctlr, }; + const char * const name_fmt = "nintendo_switch_controller_battery_%s"; + int ret = 0; + + /* Set initially to unknown before receiving first input report */ + ctlr->battery_capacity = POWER_SUPPLY_CAPACITY_LEVEL_UNKNOWN; + + /* Configure the battery's description */ + ctlr->battery_desc.properties = joycon_battery_props; + ctlr->battery_desc.num_properties = + ARRAY_SIZE(joycon_battery_props); + ctlr->battery_desc.get_property = joycon_battery_get_property; + ctlr->battery_desc.type = POWER_SUPPLY_TYPE_BATTERY; + ctlr->battery_desc.use_for_apm = 0; + ctlr->battery_desc.name = devm_kasprintf(&hdev->dev, GFP_KERNEL, + name_fmt, + dev_name(&hdev->dev)); + if (!ctlr->battery_desc.name) + return -ENOMEM; + + ctlr->battery = devm_power_supply_register(&hdev->dev, + &ctlr->battery_desc, + &supply_config); + if (IS_ERR(ctlr->battery)) { + ret = PTR_ERR(ctlr->battery); + hid_err(hdev, "Failed to register battery; ret=%d\n", ret); + return ret; + } + power_supply_powers(ctlr->battery, &hdev->dev); + return 0; +} + /* Common handler for parsing inputs */ static int joycon_ctlr_read_handler(struct joycon_ctlr *ctlr, u8 *data, int size) @@ -834,6 +960,7 @@ static int nintendo_hid_probe(struct hid_device *hdev, hid_set_drvdata(hdev, ctlr); mutex_init(&ctlr->output_mutex); init_waitqueue_head(&ctlr->wait); + spin_lock_init(&ctlr->lock); ret = hid_parse(hdev); if (ret) { @@ -906,6 +1033,13 @@ static int nintendo_hid_probe(struct hid_device *hdev, goto err_close; } + /* Initialize the battery power supply */ + ret = joycon_power_supply_create(ctlr); + if (ret) { + hid_err(hdev, "Failed to create power_supply; ret=%d\n", ret); + goto err_close; + } + ret = joycon_input_create(ctlr); if (ret) { hid_err(hdev, "Failed to create input device; ret=%d\n", ret); From patchwork Sun Aug 23 04:41:47 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Daniel Ogorchock X-Patchwork-Id: 11731371 X-Patchwork-Delegate: jikos@jikos.cz Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id C2E0C618 for ; Sun, 23 Aug 2020 04:42:31 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id A5C232078D for ; Sun, 23 Aug 2020 04:42:31 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b="DnYlFAno" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1725876AbgHWEma (ORCPT ); Sun, 23 Aug 2020 00:42:30 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:59398 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1725921AbgHWEmY (ORCPT ); Sun, 23 Aug 2020 00:42:24 -0400 Received: from mail-oi1-x241.google.com (mail-oi1-x241.google.com [IPv6:2607:f8b0:4864:20::241]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 218B1C061573 for ; Sat, 22 Aug 2020 21:42:23 -0700 (PDT) Received: by mail-oi1-x241.google.com with SMTP id z22so5314781oid.1 for ; Sat, 22 Aug 2020 21:42:23 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20161025; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=MiszAOukic7LHG4j+FMHimgzXIzyGDTIZAhegDsdD50=; b=DnYlFAnooTS8lwNPYmaV7NCT5qthboZnd9P664xITVoCx0b6Uy+XALGa9oDpu3y9oe xX3QhCkGPr8cVgGR7nLiVVgaE2UDbhTdWscDuWZHTtfBEuv1KbWN8zRmliIg7HEm8UK0 vFnyiUn7HMpMlVEDCkUM+h6VRHUbxAymBBkhJ54a5PZp4nVu14RnTcqOMfhNghru4JbL 5bYeTbdnHnrrNEPNzvJbU1+9trQYYYJtmT5zmnRG5Czr0VOWPSHxjCu4ug3lUQB7hKbd mKXiv5NYbHSc7S60GoI4DkiaDCnGk/WhABuaBJJS7DZf4nLnjrS3xVQGiTggxDDlKG7I rKVQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=MiszAOukic7LHG4j+FMHimgzXIzyGDTIZAhegDsdD50=; b=hfSCzNd8BqQxx+6GfIj1WNPRyHKfnEM39FLmXbC8KjO8xJyDIptG3Gm9hFTz930sI1 Ers5E+OmVjHj85U7J5f+AoVgVOr6VsR0Es93tOp3183e1DN617Dxaru0dkCQ9cYzwXLh OFaGLV7/zWFrvwvZKDOfQ3cVAeJWJ6W56Vs7MJXlux5VzbFPMlYn7W1Jlfh7YSGP/Ymb B/RvcOiBaz99ch57PDFKg3idkAJgm2y66iY40p0Eh8PWxedarxn47rc0xi0SMDoDNWOg 71e+LDjx+klH3iR4/80keqqJJvXgIyGX53PiZjs75tD9bs4ObflDTBDNGg/anLgmtLDx yoUw== X-Gm-Message-State: AOAM533ys/XDHfQKUFW1sS1ZARpVnB1Fu9ms3JCn2wTbVKERPOtYuuYj fn7Sl4xnYrYba0mOp/RPO7w2Zh17uC8zi1V4 X-Google-Smtp-Source: ABdhPJzkhr4TwjMGtjNHjshljkf+NSUZ4nLgVzLELtSzsua9KVMUXW8bmL/BkhAZKU0j2a/ipfVh2w== X-Received: by 2002:aca:c38c:: with SMTP id t134mr107545oif.15.1598157742344; Sat, 22 Aug 2020 21:42:22 -0700 (PDT) Received: from Arrakis.djogorchock.com ([136.33.205.58]) by smtp.gmail.com with ESMTPSA id z10sm1308572otk.6.2020.08.22.21.42.21 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Sat, 22 Aug 2020 21:42:21 -0700 (PDT) From: "Daniel J. Ogorchock" To: linux-input@vger.kernel.org Cc: thunderbird2k@gmail.com, blaws05@gmail.com, benjamin.tissoires@redhat.com, jikos@kernel.org, Roderick.Colenbrander@sony.com, svv@google.com, s.jegen@gmail.com, carmueller@gmail.com, pgriffais@valvesoftware.com, hadess@hadess.net, "Daniel J. Ogorchock" Subject: [PATCH v12 04/14] HID: nintendo: add home led support Date: Sat, 22 Aug 2020 23:41:47 -0500 Message-Id: <20200823044157.339677-5-djogorchock@gmail.com> X-Mailer: git-send-email 2.28.0 In-Reply-To: <20200823044157.339677-1-djogorchock@gmail.com> References: <20200823044157.339677-1-djogorchock@gmail.com> MIME-Version: 1.0 Sender: linux-input-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-input@vger.kernel.org This patch adds the ability to set the intensity level of the home button's LED. Signed-off-by: Daniel J. Ogorchock --- drivers/hid/hid-nintendo.c | 69 +++++++++++++++++++++++++++++++++++--- 1 file changed, 65 insertions(+), 4 deletions(-) diff --git a/drivers/hid/hid-nintendo.c b/drivers/hid/hid-nintendo.c index adecd6790fe9..e5afe360c676 100644 --- a/drivers/hid/hid-nintendo.c +++ b/drivers/hid/hid-nintendo.c @@ -192,7 +192,8 @@ struct joycon_input_report { struct joycon_ctlr { struct hid_device *hdev; struct input_dev *input; - struct led_classdev leds[JC_NUM_LEDS]; + struct led_classdev leds[JC_NUM_LEDS]; /* player leds */ + struct led_classdev home_led; enum joycon_ctlr_state ctlr_state; spinlock_t lock; @@ -726,6 +727,40 @@ static int joycon_player_led_brightness_set(struct led_classdev *led, return ret; } +static int joycon_home_led_brightness_set(struct led_classdev *led, + enum led_brightness brightness) +{ + struct device *dev = led->dev->parent; + struct hid_device *hdev = to_hid_device(dev); + struct joycon_ctlr *ctlr; + struct joycon_subcmd_request *req; + u8 buffer[sizeof(*req) + 5] = { 0 }; + u8 *data; + int ret; + + ctlr = hid_get_drvdata(hdev); + if (!ctlr) { + hid_err(hdev, "No controller data\n"); + return -ENODEV; + } + + req = (struct joycon_subcmd_request *)buffer; + req->subcmd_id = JC_SUBCMD_SET_HOME_LIGHT; + data = req->data; + data[0] = 0x01; + data[1] = brightness << 4; + data[2] = brightness | (brightness << 4); + data[3] = 0x11; + data[4] = 0x11; + + hid_dbg(hdev, "setting home led brightness\n"); + mutex_lock(&ctlr->output_mutex); + ret = joycon_send_subcmd(ctlr, req, 5); + mutex_unlock(&ctlr->output_mutex); + + return ret; +} + static const char * const joycon_player_led_names[] = { "player1", "player2", @@ -734,7 +769,7 @@ static const char * const joycon_player_led_names[] = { }; static DEFINE_MUTEX(joycon_input_num_mutex); -static int joycon_player_leds_create(struct joycon_ctlr *ctlr) +static int joycon_leds_create(struct joycon_ctlr *ctlr) { struct hid_device *hdev = ctlr->hdev; struct device *dev = &hdev->dev; @@ -771,7 +806,7 @@ static int joycon_player_leds_create(struct joycon_ctlr *ctlr) ret = devm_led_classdev_register(&hdev->dev, led); if (ret) { hid_err(hdev, "Failed registering %s LED\n", led->name); - break; + return ret; } } @@ -779,6 +814,32 @@ static int joycon_player_leds_create(struct joycon_ctlr *ctlr) input_num = 1; mutex_unlock(&joycon_input_num_mutex); + /* configure the home LED */ + if (ctlr->hdev->product != USB_DEVICE_ID_NINTENDO_JOYCONL) { + name = devm_kasprintf(dev, GFP_KERNEL, "%s:%s", d_name, "home"); + if (!name) + return ret; + + led = &ctlr->home_led; + led->name = name; + led->brightness = 0; + led->max_brightness = 0xF; + led->brightness_set_blocking = joycon_home_led_brightness_set; + led->flags = LED_CORE_SUSPENDRESUME | LED_HW_PLUGGABLE; + ret = devm_led_classdev_register(&hdev->dev, led); + if (ret) { + hid_err(hdev, "Failed registering home led\n"); + return ret; + } + /* Set the home LED to 0 as default state */ + ret = joycon_home_led_brightness_set(led, 0); + if (ret) { + hid_err(hdev, "Failed to set home LED dflt; ret=%d\n", + ret); + return ret; + } + } + return 0; } @@ -1027,7 +1088,7 @@ static int nintendo_hid_probe(struct hid_device *hdev, mutex_unlock(&ctlr->output_mutex); /* Initialize the leds */ - ret = joycon_player_leds_create(ctlr); + ret = joycon_leds_create(ctlr); if (ret) { hid_err(hdev, "Failed to create leds; ret=%d\n", ret); goto err_close; From patchwork Sun Aug 23 04:41:48 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Daniel Ogorchock X-Patchwork-Id: 11731373 X-Patchwork-Delegate: jikos@jikos.cz Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id C3F63618 for ; Sun, 23 Aug 2020 04:42:32 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 9420F20720 for ; Sun, 23 Aug 2020 04:42:32 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b="nNbqhTP/" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1725921AbgHWEma (ORCPT ); Sun, 23 Aug 2020 00:42:30 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:59410 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1725139AbgHWEm2 (ORCPT ); Sun, 23 Aug 2020 00:42:28 -0400 Received: from mail-oi1-x243.google.com (mail-oi1-x243.google.com [IPv6:2607:f8b0:4864:20::243]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 4AF92C061574 for ; Sat, 22 Aug 2020 21:42:27 -0700 (PDT) Received: by mail-oi1-x243.google.com with SMTP id z22so5314826oid.1 for ; Sat, 22 Aug 2020 21:42:27 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20161025; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=3c9j8XUa9oLAD1nlYPTBNSKtpuWM3x4QxqyDAUS3noM=; b=nNbqhTP/vkcKf3Ec9IXPQ32scwF8YoWR746z+5U/qpPdOR/gM1mfIsJVT4YUAkhi0G KyzlpSZjBxuKxRBF42KA00wapxTPFlwJdh59HHIVQptQupxgUE0FpwgRiByAnFB6hM6L 4cUl18s8GbVuXX5ELZI137kXnTjV+ikjbWTvOHG3JBcwTlktUQcl7UZJ4cdsuMujedu3 d9BGNd3ttcEmcOXyO8vCKIPjFQemb3zAsNyHB/Kn3Bu+pXwP94lV6n60nUYayhAMdSjz FBHFRd0hvD6LARung8Cpx4d4gzSCHVBr7/rGx/B7vJoq+KGJfXGZy7njknV/cxa6J0hr bXYw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=3c9j8XUa9oLAD1nlYPTBNSKtpuWM3x4QxqyDAUS3noM=; b=S4zzTaBM+TEohp5wQKRa5nMsCkMGwYI/dbmenCBjn2HQLLw/6wHL2lFOkXlMZ/YWUu eNICau+DUIvRoLSPBDWmM/wbd1QTYxKlHwIKP2HEXvgu9U/wjqNGemDaRCEJfioNZob/ yFb160c2wHWUvNzDufnfnBFnhTvdPYEGh+D5L7Y9rRDzOwDdNxsX0apRaVvZKAbp+gHT vKR28XchivUScJlR4qJ0I0FUJ1fL9Dh3vzgVauNtHulR257gzvMIm797TzylWjjGOI8Q C/QdRJmZpjzdtHhU5XzXKqfRluveT7z5hPdelOYdMeK9mvhAxOAQ4T7a6kVDWiyQ6WoH bIgQ== X-Gm-Message-State: AOAM533hwe/EDRZ0HeWL6t4G7grHPoDGbAVMQZFvrtO/1MfmVGijxQJ2 5qZDhikfKAJLfY4lA4CoQJQUovrRppPhwMUh X-Google-Smtp-Source: ABdhPJz+TXy5fkzLxPiE1TmDmNPDFsE8df0kZ6hIuw5m86q0L+zcSiG55JzJSv7dqc0FBkTAYmqjeg== X-Received: by 2002:a05:6808:7c9:: with SMTP id f9mr108189oij.69.1598157743441; Sat, 22 Aug 2020 21:42:23 -0700 (PDT) Received: from Arrakis.djogorchock.com ([136.33.205.58]) by smtp.gmail.com with ESMTPSA id z10sm1308572otk.6.2020.08.22.21.42.22 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Sat, 22 Aug 2020 21:42:22 -0700 (PDT) From: "Daniel J. Ogorchock" To: linux-input@vger.kernel.org Cc: thunderbird2k@gmail.com, blaws05@gmail.com, benjamin.tissoires@redhat.com, jikos@kernel.org, Roderick.Colenbrander@sony.com, svv@google.com, s.jegen@gmail.com, carmueller@gmail.com, pgriffais@valvesoftware.com, hadess@hadess.net, "Daniel J. Ogorchock" Subject: [PATCH v12 05/14] HID: nintendo: add rumble support Date: Sat, 22 Aug 2020 23:41:48 -0500 Message-Id: <20200823044157.339677-6-djogorchock@gmail.com> X-Mailer: git-send-email 2.28.0 In-Reply-To: <20200823044157.339677-1-djogorchock@gmail.com> References: <20200823044157.339677-1-djogorchock@gmail.com> MIME-Version: 1.0 Sender: linux-input-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-input@vger.kernel.org This patch adds support for controller rumble. The ff_effect weak magnitude is associated with the pro controller's right motor (or with a right joy-con). The strong magnitude is associated with the pro's left motor (or a left joy-con). The rumble data is sent periodically (currently configured for every 50 milliseconds). If the controller receives no rumble data for too long a time period, it will stop vibrating. The data is also sent every time joycon_set_rumble is called to avoid latency of up to 50ms. Because the rumble subcommands are sent in a deferred workqueue (they can't be sent in the play_effect function due to the hid send sleeping), the effects are queued. This ensures that no rumble effect is missed due to them arriving in too quick of succession. Signed-off-by: Daniel J. Ogorchock --- drivers/hid/Kconfig | 10 ++ drivers/hid/hid-nintendo.c | 349 ++++++++++++++++++++++++++++++++++++- 2 files changed, 356 insertions(+), 3 deletions(-) diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig index c05bfb6ac577..2ed3ea91708a 100644 --- a/drivers/hid/Kconfig +++ b/drivers/hid/Kconfig @@ -724,6 +724,16 @@ config HID_NINTENDO To compile this driver as a module, choose M here: the module will be called hid-nintendo. +config NINTENDO_FF + bool "Nintendo Switch controller force feedback support" + depends on HID_NINTENDO + select INPUT_FF_MEMLESS + help + Say Y here if you have a Nintendo Switch controller and want to enable + force feedback support for it. This works for both joy-cons and the pro + controller. For the pro controller, both rumble motors can be controlled + individually. + config HID_NTI tristate "NTI keyboard adapters" help diff --git a/drivers/hid/hid-nintendo.c b/drivers/hid/hid-nintendo.c index e5afe360c676..21fa85802894 100644 --- a/drivers/hid/hid-nintendo.c +++ b/drivers/hid/hid-nintendo.c @@ -9,6 +9,7 @@ * https://gitlab.com/pjranki/joycon-linux-kernel (Peter Rankin) * https://github.com/FrotBot/SwitchProConLinuxUSB * https://github.com/MTCKC/ProconXInput + * https://github.com/Davidobot/BetterJoyForCemu * hid-wiimote kernel hid driver * hid-logitech-hidpp driver * hid-sony driver @@ -26,6 +27,7 @@ #include #include #include +#include #include #include #include @@ -110,6 +112,120 @@ static const u16 JC_MAX_DPAD_MAG = 1; static const u16 JC_DPAD_FUZZ /*= 0*/; static const u16 JC_DPAD_FLAT /*= 0*/; +/* frequency/amplitude tables for rumble */ +struct joycon_rumble_freq_data { + u16 high; + u8 low; + u16 freq; /* Hz*/ +}; + +struct joycon_rumble_amp_data { + u8 high; + u16 low; + u16 amp; +}; + +/* + * These tables are from + * https://github.com/dekuNukem/Nintendo_Switch_Reverse_Engineering/blob/master/rumble_data_table.md + */ +static const struct joycon_rumble_freq_data joycon_rumble_frequencies[] = { + /* high, low, freq */ + { 0x0000, 0x01, 41 }, { 0x0000, 0x02, 42 }, { 0x0000, 0x03, 43 }, + { 0x0000, 0x04, 44 }, { 0x0000, 0x05, 45 }, { 0x0000, 0x06, 46 }, + { 0x0000, 0x07, 47 }, { 0x0000, 0x08, 48 }, { 0x0000, 0x09, 49 }, + { 0x0000, 0x0A, 50 }, { 0x0000, 0x0B, 51 }, { 0x0000, 0x0C, 52 }, + { 0x0000, 0x0D, 53 }, { 0x0000, 0x0E, 54 }, { 0x0000, 0x0F, 55 }, + { 0x0000, 0x10, 57 }, { 0x0000, 0x11, 58 }, { 0x0000, 0x12, 59 }, + { 0x0000, 0x13, 60 }, { 0x0000, 0x14, 62 }, { 0x0000, 0x15, 63 }, + { 0x0000, 0x16, 64 }, { 0x0000, 0x17, 66 }, { 0x0000, 0x18, 67 }, + { 0x0000, 0x19, 69 }, { 0x0000, 0x1A, 70 }, { 0x0000, 0x1B, 72 }, + { 0x0000, 0x1C, 73 }, { 0x0000, 0x1D, 75 }, { 0x0000, 0x1e, 77 }, + { 0x0000, 0x1f, 78 }, { 0x0000, 0x20, 80 }, { 0x0400, 0x21, 82 }, + { 0x0800, 0x22, 84 }, { 0x0c00, 0x23, 85 }, { 0x1000, 0x24, 87 }, + { 0x1400, 0x25, 89 }, { 0x1800, 0x26, 91 }, { 0x1c00, 0x27, 93 }, + { 0x2000, 0x28, 95 }, { 0x2400, 0x29, 97 }, { 0x2800, 0x2a, 99 }, + { 0x2c00, 0x2b, 102 }, { 0x3000, 0x2c, 104 }, { 0x3400, 0x2d, 106 }, + { 0x3800, 0x2e, 108 }, { 0x3c00, 0x2f, 111 }, { 0x4000, 0x30, 113 }, + { 0x4400, 0x31, 116 }, { 0x4800, 0x32, 118 }, { 0x4c00, 0x33, 121 }, + { 0x5000, 0x34, 123 }, { 0x5400, 0x35, 126 }, { 0x5800, 0x36, 129 }, + { 0x5c00, 0x37, 132 }, { 0x6000, 0x38, 135 }, { 0x6400, 0x39, 137 }, + { 0x6800, 0x3a, 141 }, { 0x6c00, 0x3b, 144 }, { 0x7000, 0x3c, 147 }, + { 0x7400, 0x3d, 150 }, { 0x7800, 0x3e, 153 }, { 0x7c00, 0x3f, 157 }, + { 0x8000, 0x40, 160 }, { 0x8400, 0x41, 164 }, { 0x8800, 0x42, 167 }, + { 0x8c00, 0x43, 171 }, { 0x9000, 0x44, 174 }, { 0x9400, 0x45, 178 }, + { 0x9800, 0x46, 182 }, { 0x9c00, 0x47, 186 }, { 0xa000, 0x48, 190 }, + { 0xa400, 0x49, 194 }, { 0xa800, 0x4a, 199 }, { 0xac00, 0x4b, 203 }, + { 0xb000, 0x4c, 207 }, { 0xb400, 0x4d, 212 }, { 0xb800, 0x4e, 217 }, + { 0xbc00, 0x4f, 221 }, { 0xc000, 0x50, 226 }, { 0xc400, 0x51, 231 }, + { 0xc800, 0x52, 236 }, { 0xcc00, 0x53, 241 }, { 0xd000, 0x54, 247 }, + { 0xd400, 0x55, 252 }, { 0xd800, 0x56, 258 }, { 0xdc00, 0x57, 263 }, + { 0xe000, 0x58, 269 }, { 0xe400, 0x59, 275 }, { 0xe800, 0x5a, 281 }, + { 0xec00, 0x5b, 287 }, { 0xf000, 0x5c, 293 }, { 0xf400, 0x5d, 300 }, + { 0xf800, 0x5e, 306 }, { 0xfc00, 0x5f, 313 }, { 0x0001, 0x60, 320 }, + { 0x0401, 0x61, 327 }, { 0x0801, 0x62, 334 }, { 0x0c01, 0x63, 341 }, + { 0x1001, 0x64, 349 }, { 0x1401, 0x65, 357 }, { 0x1801, 0x66, 364 }, + { 0x1c01, 0x67, 372 }, { 0x2001, 0x68, 381 }, { 0x2401, 0x69, 389 }, + { 0x2801, 0x6a, 397 }, { 0x2c01, 0x6b, 406 }, { 0x3001, 0x6c, 415 }, + { 0x3401, 0x6d, 424 }, { 0x3801, 0x6e, 433 }, { 0x3c01, 0x6f, 443 }, + { 0x4001, 0x70, 453 }, { 0x4401, 0x71, 462 }, { 0x4801, 0x72, 473 }, + { 0x4c01, 0x73, 483 }, { 0x5001, 0x74, 494 }, { 0x5401, 0x75, 504 }, + { 0x5801, 0x76, 515 }, { 0x5c01, 0x77, 527 }, { 0x6001, 0x78, 538 }, + { 0x6401, 0x79, 550 }, { 0x6801, 0x7a, 562 }, { 0x6c01, 0x7b, 574 }, + { 0x7001, 0x7c, 587 }, { 0x7401, 0x7d, 600 }, { 0x7801, 0x7e, 613 }, + { 0x7c01, 0x7f, 626 }, { 0x8001, 0x00, 640 }, { 0x8401, 0x00, 654 }, + { 0x8801, 0x00, 668 }, { 0x8c01, 0x00, 683 }, { 0x9001, 0x00, 698 }, + { 0x9401, 0x00, 713 }, { 0x9801, 0x00, 729 }, { 0x9c01, 0x00, 745 }, + { 0xa001, 0x00, 761 }, { 0xa401, 0x00, 778 }, { 0xa801, 0x00, 795 }, + { 0xac01, 0x00, 812 }, { 0xb001, 0x00, 830 }, { 0xb401, 0x00, 848 }, + { 0xb801, 0x00, 867 }, { 0xbc01, 0x00, 886 }, { 0xc001, 0x00, 905 }, + { 0xc401, 0x00, 925 }, { 0xc801, 0x00, 945 }, { 0xcc01, 0x00, 966 }, + { 0xd001, 0x00, 987 }, { 0xd401, 0x00, 1009 }, { 0xd801, 0x00, 1031 }, + { 0xdc01, 0x00, 1053 }, { 0xe001, 0x00, 1076 }, { 0xe401, 0x00, 1100 }, + { 0xe801, 0x00, 1124 }, { 0xec01, 0x00, 1149 }, { 0xf001, 0x00, 1174 }, + { 0xf401, 0x00, 1199 }, { 0xf801, 0x00, 1226 }, { 0xfc01, 0x00, 1253 } +}; + +#define joycon_max_rumble_amp (1003) +static const struct joycon_rumble_amp_data joycon_rumble_amplitudes[] = { + /* high, low, amp */ + { 0x00, 0x0040, 0 }, + { 0x02, 0x8040, 10 }, { 0x04, 0x0041, 12 }, { 0x06, 0x8041, 14 }, + { 0x08, 0x0042, 17 }, { 0x0a, 0x8042, 20 }, { 0x0c, 0x0043, 24 }, + { 0x0e, 0x8043, 28 }, { 0x10, 0x0044, 33 }, { 0x12, 0x8044, 40 }, + { 0x14, 0x0045, 47 }, { 0x16, 0x8045, 56 }, { 0x18, 0x0046, 67 }, + { 0x1a, 0x8046, 80 }, { 0x1c, 0x0047, 95 }, { 0x1e, 0x8047, 112 }, + { 0x20, 0x0048, 117 }, { 0x22, 0x8048, 123 }, { 0x24, 0x0049, 128 }, + { 0x26, 0x8049, 134 }, { 0x28, 0x004a, 140 }, { 0x2a, 0x804a, 146 }, + { 0x2c, 0x004b, 152 }, { 0x2e, 0x804b, 159 }, { 0x30, 0x004c, 166 }, + { 0x32, 0x804c, 173 }, { 0x34, 0x004d, 181 }, { 0x36, 0x804d, 189 }, + { 0x38, 0x004e, 198 }, { 0x3a, 0x804e, 206 }, { 0x3c, 0x004f, 215 }, + { 0x3e, 0x804f, 225 }, { 0x40, 0x0050, 230 }, { 0x42, 0x8050, 235 }, + { 0x44, 0x0051, 240 }, { 0x46, 0x8051, 245 }, { 0x48, 0x0052, 251 }, + { 0x4a, 0x8052, 256 }, { 0x4c, 0x0053, 262 }, { 0x4e, 0x8053, 268 }, + { 0x50, 0x0054, 273 }, { 0x52, 0x8054, 279 }, { 0x54, 0x0055, 286 }, + { 0x56, 0x8055, 292 }, { 0x58, 0x0056, 298 }, { 0x5a, 0x8056, 305 }, + { 0x5c, 0x0057, 311 }, { 0x5e, 0x8057, 318 }, { 0x60, 0x0058, 325 }, + { 0x62, 0x8058, 332 }, { 0x64, 0x0059, 340 }, { 0x66, 0x8059, 347 }, + { 0x68, 0x005a, 355 }, { 0x6a, 0x805a, 362 }, { 0x6c, 0x005b, 370 }, + { 0x6e, 0x805b, 378 }, { 0x70, 0x005c, 387 }, { 0x72, 0x805c, 395 }, + { 0x74, 0x005d, 404 }, { 0x76, 0x805d, 413 }, { 0x78, 0x005e, 422 }, + { 0x7a, 0x805e, 431 }, { 0x7c, 0x005f, 440 }, { 0x7e, 0x805f, 450 }, + { 0x80, 0x0060, 460 }, { 0x82, 0x8060, 470 }, { 0x84, 0x0061, 480 }, + { 0x86, 0x8061, 491 }, { 0x88, 0x0062, 501 }, { 0x8a, 0x8062, 512 }, + { 0x8c, 0x0063, 524 }, { 0x8e, 0x8063, 535 }, { 0x90, 0x0064, 547 }, + { 0x92, 0x8064, 559 }, { 0x94, 0x0065, 571 }, { 0x96, 0x8065, 584 }, + { 0x98, 0x0066, 596 }, { 0x9a, 0x8066, 609 }, { 0x9c, 0x0067, 623 }, + { 0x9e, 0x8067, 636 }, { 0xa0, 0x0068, 650 }, { 0xa2, 0x8068, 665 }, + { 0xa4, 0x0069, 679 }, { 0xa6, 0x8069, 694 }, { 0xa8, 0x006a, 709 }, + { 0xaa, 0x806a, 725 }, { 0xac, 0x006b, 741 }, { 0xae, 0x806b, 757 }, + { 0xb0, 0x006c, 773 }, { 0xb2, 0x806c, 790 }, { 0xb4, 0x006d, 808 }, + { 0xb6, 0x806d, 825 }, { 0xb8, 0x006e, 843 }, { 0xba, 0x806e, 862 }, + { 0xbc, 0x006f, 881 }, { 0xbe, 0x806f, 900 }, { 0xc0, 0x0070, 920 }, + { 0xc2, 0x8070, 940 }, { 0xc4, 0x0071, 960 }, { 0xc6, 0x8071, 981 }, + { 0xc8, 0x0072, joycon_max_rumble_amp } +}; + /* States for controller state machine */ enum joycon_ctlr_state { JOYCON_CTLR_STATE_INIT, @@ -187,6 +303,12 @@ struct joycon_input_report { #define JC_MAX_RESP_SIZE (sizeof(struct joycon_input_report) + 35) #define JC_NUM_LEDS 4 +#define JC_RUMBLE_DATA_SIZE 8 +#define JC_RUMBLE_QUEUE_SIZE 8 + +static const u16 JC_RUMBLE_DFLT_LOW_FREQ = 160; +static const u16 JC_RUMBLE_DFLT_HIGH_FREQ = 320; +static const u16 JC_RUMBLE_PERIOD_MS = 50; /* Each physical controller is associated with a joycon_ctlr struct */ struct joycon_ctlr { @@ -219,6 +341,18 @@ struct joycon_ctlr { u8 battery_capacity; bool battery_charging; bool host_powered; + + /* rumble */ + u8 rumble_data[JC_RUMBLE_QUEUE_SIZE][JC_RUMBLE_DATA_SIZE]; + int rumble_queue_head; + int rumble_queue_tail; + struct workqueue_struct *rumble_queue; + struct work_struct rumble_worker; + unsigned int rumble_msecs; + u16 rumble_ll_freq; + u16 rumble_lh_freq; + u16 rumble_rl_freq; + u16 rumble_rh_freq; }; static int __joycon_hid_send(struct hid_device *hdev, u8 *data, size_t len) @@ -275,6 +409,12 @@ static int joycon_send_subcmd(struct joycon_ctlr *ctlr, size_t data_len) { int ret; + unsigned long flags; + + spin_lock_irqsave(&ctlr->lock, flags); + memcpy(subcmd->rumble_data, ctlr->rumble_data[ctlr->rumble_queue_tail], + JC_RUMBLE_DATA_SIZE); + spin_unlock_irqrestore(&ctlr->lock, flags); subcmd->output_id = JC_OUTPUT_RUMBLE_AND_SUBCMD; subcmd->packet_num = ctlr->subcmd_num; @@ -427,6 +567,19 @@ static int joycon_set_report_mode(struct joycon_ctlr *ctlr) return joycon_send_subcmd(ctlr, req, 1); } +static int joycon_enable_rumble(struct joycon_ctlr *ctlr, bool enable) +{ + struct joycon_subcmd_request *req; + u8 buffer[sizeof(*req) + 1] = { 0 }; + + req = (struct joycon_subcmd_request *)buffer; + req->subcmd_id = JC_SUBCMD_ENABLE_VIBRATION; + req->data[0] = enable ? 0x01 : 0x00; + + hid_dbg(ctlr->hdev, "%s rumble\n", enable ? "enabling" : "disabling"); + return joycon_send_subcmd(ctlr, req, 1); +} + static s32 joycon_map_stick_val(struct joycon_stick_cal *cal, s32 val) { s32 center = cal->center; @@ -453,10 +606,15 @@ static void joycon_parse_report(struct joycon_ctlr *ctlr, u8 tmp; u32 btns; u32 id = ctlr->hdev->product; + unsigned long msecs = jiffies_to_msecs(jiffies); + + spin_lock_irqsave(&ctlr->lock, flags); + if (IS_ENABLED(CONFIG_NINTENDO_FF) && rep->vibrator_report && + (msecs - ctlr->rumble_msecs) >= JC_RUMBLE_PERIOD_MS) + queue_work(ctlr->rumble_queue, &ctlr->rumble_worker); /* Parse the battery status */ tmp = rep->bat_con; - spin_lock_irqsave(&ctlr->lock, flags); ctlr->host_powered = tmp & BIT(0); ctlr->battery_charging = tmp & BIT(4); tmp = tmp >> 5; @@ -579,6 +737,161 @@ static void joycon_parse_report(struct joycon_ctlr *ctlr, input_sync(dev); } +static void joycon_rumble_worker(struct work_struct *work) +{ + struct joycon_ctlr *ctlr = container_of(work, struct joycon_ctlr, + rumble_worker); + unsigned long flags; + bool again = true; + int ret; + + while (again) { + mutex_lock(&ctlr->output_mutex); + ret = joycon_enable_rumble(ctlr, true); + mutex_unlock(&ctlr->output_mutex); + if (ret < 0) + hid_warn(ctlr->hdev, "Failed to set rumble; e=%d", ret); + + spin_lock_irqsave(&ctlr->lock, flags); + ctlr->rumble_msecs = jiffies_to_msecs(jiffies); + if (ctlr->rumble_queue_tail != ctlr->rumble_queue_head) { + if (++ctlr->rumble_queue_tail >= JC_RUMBLE_QUEUE_SIZE) + ctlr->rumble_queue_tail = 0; + } else { + again = false; + } + spin_unlock_irqrestore(&ctlr->lock, flags); + } +} + +#if IS_ENABLED(CONFIG_NINTENDO_FF) +static struct joycon_rumble_freq_data joycon_find_rumble_freq(u16 freq) +{ + const size_t length = ARRAY_SIZE(joycon_rumble_frequencies); + const struct joycon_rumble_freq_data *data = joycon_rumble_frequencies; + int i = 0; + + if (freq > data[0].freq) { + for (i = 1; i < length - 1; i++) { + if (freq > data[i - 1].freq && freq <= data[i].freq) + break; + } + } + + return data[i]; +} + +static struct joycon_rumble_amp_data joycon_find_rumble_amp(u16 amp) +{ + const size_t length = ARRAY_SIZE(joycon_rumble_amplitudes); + const struct joycon_rumble_amp_data *data = joycon_rumble_amplitudes; + int i = 0; + + if (amp > data[0].amp) { + for (i = 1; i < length - 1; i++) { + if (amp > data[i - 1].amp && amp <= data[i].amp) + break; + } + } + + return data[i]; +} + +static void joycon_encode_rumble(u8 *data, u16 freq_low, u16 freq_high, u16 amp) +{ + struct joycon_rumble_freq_data freq_data_low; + struct joycon_rumble_freq_data freq_data_high; + struct joycon_rumble_amp_data amp_data; + + freq_data_low = joycon_find_rumble_freq(freq_low); + freq_data_high = joycon_find_rumble_freq(freq_high); + amp_data = joycon_find_rumble_amp(amp); + + data[0] = (freq_data_high.high >> 8) & 0xFF; + data[1] = (freq_data_high.high & 0xFF) + amp_data.high; + data[2] = freq_data_low.low + ((amp_data.low >> 8) & 0xFF); + data[3] = amp_data.low & 0xFF; +} + +static const u16 JOYCON_MAX_RUMBLE_HIGH_FREQ = 1253; +static const u16 JOYCON_MIN_RUMBLE_HIGH_FREQ = 82; +static const u16 JOYCON_MAX_RUMBLE_LOW_FREQ = 626; +static const u16 JOYCON_MIN_RUMBLE_LOW_FREQ = 41; + +static void joycon_clamp_rumble_freqs(struct joycon_ctlr *ctlr) +{ + unsigned long flags; + + spin_lock_irqsave(&ctlr->lock, flags); + ctlr->rumble_ll_freq = clamp(ctlr->rumble_ll_freq, + JOYCON_MIN_RUMBLE_LOW_FREQ, + JOYCON_MAX_RUMBLE_LOW_FREQ); + ctlr->rumble_lh_freq = clamp(ctlr->rumble_lh_freq, + JOYCON_MIN_RUMBLE_HIGH_FREQ, + JOYCON_MAX_RUMBLE_HIGH_FREQ); + ctlr->rumble_rl_freq = clamp(ctlr->rumble_rl_freq, + JOYCON_MIN_RUMBLE_LOW_FREQ, + JOYCON_MAX_RUMBLE_LOW_FREQ); + ctlr->rumble_rh_freq = clamp(ctlr->rumble_rh_freq, + JOYCON_MIN_RUMBLE_HIGH_FREQ, + JOYCON_MAX_RUMBLE_HIGH_FREQ); + spin_unlock_irqrestore(&ctlr->lock, flags); +} + +static int joycon_set_rumble(struct joycon_ctlr *ctlr, u16 amp_r, u16 amp_l, + bool schedule_now) +{ + u8 data[JC_RUMBLE_DATA_SIZE]; + u16 amp; + u16 freq_r_low; + u16 freq_r_high; + u16 freq_l_low; + u16 freq_l_high; + unsigned long flags; + + spin_lock_irqsave(&ctlr->lock, flags); + freq_r_low = ctlr->rumble_rl_freq; + freq_r_high = ctlr->rumble_rh_freq; + freq_l_low = ctlr->rumble_ll_freq; + freq_l_high = ctlr->rumble_lh_freq; + spin_unlock_irqrestore(&ctlr->lock, flags); + + /* right joy-con */ + amp = amp_r * (u32)joycon_max_rumble_amp / 65535; + joycon_encode_rumble(data + 4, freq_r_low, freq_r_high, amp); + + /* left joy-con */ + amp = amp_l * (u32)joycon_max_rumble_amp / 65535; + joycon_encode_rumble(data, freq_l_low, freq_l_high, amp); + + spin_lock_irqsave(&ctlr->lock, flags); + if (++ctlr->rumble_queue_head >= JC_RUMBLE_QUEUE_SIZE) + ctlr->rumble_queue_head = 0; + memcpy(ctlr->rumble_data[ctlr->rumble_queue_head], data, + JC_RUMBLE_DATA_SIZE); + spin_unlock_irqrestore(&ctlr->lock, flags); + + /* don't wait for the periodic send (reduces latency) */ + if (schedule_now) + queue_work(ctlr->rumble_queue, &ctlr->rumble_worker); + + return 0; +} + +static int joycon_play_effect(struct input_dev *dev, void *data, + struct ff_effect *effect) +{ + struct joycon_ctlr *ctlr = input_get_drvdata(dev); + + if (effect->type != FF_RUMBLE) + return 0; + + return joycon_set_rumble(ctlr, + effect->u.rumble.weak_magnitude, + effect->u.rumble.strong_magnitude, + true); +} +#endif /* IS_ENABLED(CONFIG_NINTENDO_FF) */ static const unsigned int joycon_button_inputs_l[] = { BTN_SELECT, BTN_Z, BTN_THUMBL, @@ -682,6 +995,19 @@ static int joycon_input_create(struct joycon_ctlr *ctlr) input_set_capability(ctlr->input, EV_KEY, BTN_TL2); } +#if IS_ENABLED(CONFIG_NINTENDO_FF) + /* set up rumble */ + input_set_capability(ctlr->input, EV_FF, FF_RUMBLE); + input_ff_create_memless(ctlr->input, NULL, joycon_play_effect); + ctlr->rumble_ll_freq = JC_RUMBLE_DFLT_LOW_FREQ; + ctlr->rumble_lh_freq = JC_RUMBLE_DFLT_HIGH_FREQ; + ctlr->rumble_rl_freq = JC_RUMBLE_DFLT_LOW_FREQ; + ctlr->rumble_rh_freq = JC_RUMBLE_DFLT_HIGH_FREQ; + joycon_clamp_rumble_freqs(ctlr); + joycon_set_rumble(ctlr, 0, 0, false); + ctlr->rumble_msecs = jiffies_to_msecs(jiffies); +#endif + ret = input_register_device(ctlr->input); if (ret) return ret; @@ -1018,21 +1344,26 @@ static int nintendo_hid_probe(struct hid_device *hdev, ctlr->hdev = hdev; ctlr->ctlr_state = JOYCON_CTLR_STATE_INIT; + ctlr->rumble_queue_head = JC_RUMBLE_QUEUE_SIZE - 1; + ctlr->rumble_queue_tail = 0; hid_set_drvdata(hdev, ctlr); mutex_init(&ctlr->output_mutex); init_waitqueue_head(&ctlr->wait); spin_lock_init(&ctlr->lock); + ctlr->rumble_queue = alloc_workqueue("hid-nintendo-rumble_wq", + WQ_FREEZABLE | WQ_MEM_RECLAIM, 0); + INIT_WORK(&ctlr->rumble_worker, joycon_rumble_worker); ret = hid_parse(hdev); if (ret) { hid_err(hdev, "HID parse failed\n"); - goto err; + goto err_wq; } ret = hid_hw_start(hdev, HID_CONNECT_HIDRAW); if (ret) { hid_err(hdev, "HW start failed\n"); - goto err; + goto err_wq; } ret = hid_hw_open(hdev); @@ -1085,6 +1416,13 @@ static int nintendo_hid_probe(struct hid_device *hdev, goto err_mutex; } + /* Enable rumble */ + ret = joycon_enable_rumble(ctlr, true); + if (ret) { + hid_err(hdev, "Failed to enable rumble; ret=%d\n", ret); + goto err_mutex; + } + mutex_unlock(&ctlr->output_mutex); /* Initialize the leds */ @@ -1118,6 +1456,8 @@ static int nintendo_hid_probe(struct hid_device *hdev, hid_hw_close(hdev); err_stop: hid_hw_stop(hdev); +err_wq: + destroy_workqueue(ctlr->rumble_queue); err: hid_err(hdev, "probe - fail = %d\n", ret); return ret; @@ -1125,7 +1465,10 @@ static int nintendo_hid_probe(struct hid_device *hdev, static void nintendo_hid_remove(struct hid_device *hdev) { + struct joycon_ctlr *ctlr = hid_get_drvdata(hdev); + hid_dbg(hdev, "remove\n"); + destroy_workqueue(ctlr->rumble_queue); hid_hw_close(hdev); hid_hw_stop(hdev); } From patchwork Sun Aug 23 04:41:49 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Daniel Ogorchock X-Patchwork-Id: 11731379 X-Patchwork-Delegate: jikos@jikos.cz Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 6070D913 for ; Sun, 23 Aug 2020 04:42:41 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 46EFA2078D for ; Sun, 23 Aug 2020 04:42:41 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b="U+OaQqit" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726056AbgHWEmg (ORCPT ); Sun, 23 Aug 2020 00:42:36 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:59422 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726079AbgHWEm2 (ORCPT ); Sun, 23 Aug 2020 00:42:28 -0400 Received: from mail-oi1-x242.google.com (mail-oi1-x242.google.com [IPv6:2607:f8b0:4864:20::242]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 3BD9BC061795 for ; Sat, 22 Aug 2020 21:42:28 -0700 (PDT) Received: by mail-oi1-x242.google.com with SMTP id b22so5301896oic.8 for ; Sat, 22 Aug 2020 21:42:28 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20161025; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=7L8phMU9+8q+He5FsCFvx+z/W6xRNUQd+y+c66yeWMw=; b=U+OaQqit3+LkatMc8V3bhbPZEHnDA0fZiobABdKM2mPccrjLl46sR2XvvENdN/kKnJ TgL5upOgul0M7k9A6EAYK+Nz5TNY3QfU+TRadCkTJv+UfAFJYsEnX7qMQGgNWFf7tSZn xlUjNEEfjTUc5v1FiQUjUr3sa2ymf1hWayp87CjgTR3hVpXkby9B5KmhqnbXd4Yw5jIF bZRARiYLqtALhKcfgsPB6n4i7NhCP8VKNESqvIFmZ2mnCE68CRrhBRYD0IIkUYhh9wAe Q9tyDGM4pbVuUsaN1lIuPDvxOgDfJ8kq9yDb4vjnHNsPZ/dMtCRLKyBNhVzD84CrTOz2 OeIw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=7L8phMU9+8q+He5FsCFvx+z/W6xRNUQd+y+c66yeWMw=; b=KYXTrRFhjavfFTK7pyn17dKQN6bi0rWa9FNT1qwHTYHwMRwsrHx8cqpgZ5IcSmO4cs ljHewOn1ROp2ftQ2EPTOkSwxcqghH5cHkpphHlnEAY8WYVhaRzbBLH3tt4pApunyykGx PrfA6PofIO495RRbeQ+t1AILeeyQDtShpbstlqWCrV4BN1+82mMJphI4A4NqB7Rc4y+d G1qwHN3L8K7StGqIewrqIN0sqv6tNCHdmm4bEOge35RSuSAxMmZVGmWZj8U7I4QU66jG wSB2hUw4EaIkQlYAV+aovF0JlWi4L6YLmI+Q0q746INTf9qkMnR7ZyGNqTIA3mO59Ubu lA6g== X-Gm-Message-State: AOAM531wzWwRSWqf8xd41E985K4vuQcrz5PuhKPK29NtOajsFN8JX71j pXmyPXRCcCACSGNNLPQ1JjOAAg6mL8gm/59y X-Google-Smtp-Source: ABdhPJxhkB1ngRvCrilKTq2AzyZtHti+czeN9jz8neNToDb3ruAw/mfOblTSZkP1HDjQUXLcN8ibUA== X-Received: by 2002:aca:ba83:: with SMTP id k125mr109748oif.49.1598157744562; Sat, 22 Aug 2020 21:42:24 -0700 (PDT) Received: from Arrakis.djogorchock.com ([136.33.205.58]) by smtp.gmail.com with ESMTPSA id z10sm1308572otk.6.2020.08.22.21.42.23 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Sat, 22 Aug 2020 21:42:23 -0700 (PDT) From: "Daniel J. Ogorchock" To: linux-input@vger.kernel.org Cc: thunderbird2k@gmail.com, blaws05@gmail.com, benjamin.tissoires@redhat.com, jikos@kernel.org, Roderick.Colenbrander@sony.com, svv@google.com, s.jegen@gmail.com, carmueller@gmail.com, pgriffais@valvesoftware.com, hadess@hadess.net, "Daniel J. Ogorchock" Subject: [PATCH v12 06/14] HID: nintendo: improve subcommand reliability Date: Sat, 22 Aug 2020 23:41:49 -0500 Message-Id: <20200823044157.339677-7-djogorchock@gmail.com> X-Mailer: git-send-email 2.28.0 In-Reply-To: <20200823044157.339677-1-djogorchock@gmail.com> References: <20200823044157.339677-1-djogorchock@gmail.com> MIME-Version: 1.0 Sender: linux-input-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-input@vger.kernel.org The controller occasionally doesn't respond to subcommands. It appears that it's dropping them. To improve reliability, this patch attempts one retry in the case of a synchronous send timeout. In testing, this has resolved all timeout failures (most common for LED setting and rumble setting subcommands). The 1 second timeout is excessively long for rumble and LED subcommands, so the timeout has been made a param for joycon_hid_send_sync. Most subcommands continue to use the 1s timeout, since they can result in long response times. Rumble and LED setting subcommands have been reduced to 250ms, since response times for them are much quicker (and this significantly reduces the observable impact in the case of a retry being required). Signed-off-by: Daniel J. Ogorchock --- drivers/hid/hid-nintendo.c | 66 ++++++++++++++++++++++++-------------- 1 file changed, 42 insertions(+), 24 deletions(-) diff --git a/drivers/hid/hid-nintendo.c b/drivers/hid/hid-nintendo.c index 21fa85802894..2638c6aff9d2 100644 --- a/drivers/hid/hid-nintendo.c +++ b/drivers/hid/hid-nintendo.c @@ -370,27 +370,45 @@ static int __joycon_hid_send(struct hid_device *hdev, u8 *data, size_t len) return ret; } -static int joycon_hid_send_sync(struct joycon_ctlr *ctlr, u8 *data, size_t len) +static int joycon_hid_send_sync(struct joycon_ctlr *ctlr, u8 *data, size_t len, + u32 timeout) { int ret; + int tries = 2; - ret = __joycon_hid_send(ctlr->hdev, data, len); - if (ret < 0) { - memset(ctlr->input_buf, 0, JC_MAX_RESP_SIZE); - return ret; - } + /* + * The controller occasionally seems to drop subcommands. In testing, + * doing one retry after a timeout appears to always work. + */ + while (tries--) { + ret = __joycon_hid_send(ctlr->hdev, data, len); + if (ret < 0) { + memset(ctlr->input_buf, 0, JC_MAX_RESP_SIZE); + return ret; + } - if (!wait_event_timeout(ctlr->wait, ctlr->received_resp, HZ)) { - hid_dbg(ctlr->hdev, "synchronous send/receive timed out\n"); - memset(ctlr->input_buf, 0, JC_MAX_RESP_SIZE); - return -ETIMEDOUT; + ret = wait_event_timeout(ctlr->wait, ctlr->received_resp, + timeout); + if (!ret) { + hid_dbg(ctlr->hdev, + "synchronous send/receive timed out\n"); + if (tries) { + hid_dbg(ctlr->hdev, + "retrying sync send after timeout\n"); + } + memset(ctlr->input_buf, 0, JC_MAX_RESP_SIZE); + ret = -ETIMEDOUT; + } else { + ret = 0; + break; + } } ctlr->received_resp = false; - return 0; + return ret; } -static int joycon_send_usb(struct joycon_ctlr *ctlr, u8 cmd) +static int joycon_send_usb(struct joycon_ctlr *ctlr, u8 cmd, u32 timeout) { int ret; u8 buf[2] = {JC_OUTPUT_USB_CMD}; @@ -398,7 +416,7 @@ static int joycon_send_usb(struct joycon_ctlr *ctlr, u8 cmd) buf[1] = cmd; ctlr->usb_ack_match = cmd; ctlr->msg_type = JOYCON_MSG_TYPE_USB; - ret = joycon_hid_send_sync(ctlr, buf, sizeof(buf)); + ret = joycon_hid_send_sync(ctlr, buf, sizeof(buf), timeout); if (ret) hid_dbg(ctlr->hdev, "send usb command failed; ret=%d\n", ret); return ret; @@ -406,7 +424,7 @@ static int joycon_send_usb(struct joycon_ctlr *ctlr, u8 cmd) static int joycon_send_subcmd(struct joycon_ctlr *ctlr, struct joycon_subcmd_request *subcmd, - size_t data_len) + size_t data_len, u32 timeout) { int ret; unsigned long flags; @@ -424,7 +442,7 @@ static int joycon_send_subcmd(struct joycon_ctlr *ctlr, ctlr->msg_type = JOYCON_MSG_TYPE_SUBCMD; ret = joycon_hid_send_sync(ctlr, (u8 *)subcmd, - sizeof(*subcmd) + data_len); + sizeof(*subcmd) + data_len, timeout); if (ret < 0) hid_dbg(ctlr->hdev, "send subcommand failed; ret=%d\n", ret); else @@ -443,7 +461,7 @@ static int joycon_set_player_leds(struct joycon_ctlr *ctlr, u8 flash, u8 on) req->data[0] = (flash << 4) | on; hid_dbg(ctlr->hdev, "setting player leds\n"); - return joycon_send_subcmd(ctlr, req, 1); + return joycon_send_subcmd(ctlr, req, 1, HZ/4); } static const u16 DFLT_STICK_CAL_CEN = 2000; @@ -474,7 +492,7 @@ static int joycon_request_calibration(struct joycon_ctlr *ctlr) data[4] = JC_CAL_DATA_SIZE; hid_dbg(ctlr->hdev, "requesting cal data\n"); - ret = joycon_send_subcmd(ctlr, req, 5); + ret = joycon_send_subcmd(ctlr, req, 5, HZ); if (ret) { hid_warn(ctlr->hdev, "Failed to read stick cal, using defaults; ret=%d\n", @@ -564,7 +582,7 @@ static int joycon_set_report_mode(struct joycon_ctlr *ctlr) req->data[0] = 0x30; /* standard, full report mode */ hid_dbg(ctlr->hdev, "setting controller report mode\n"); - return joycon_send_subcmd(ctlr, req, 1); + return joycon_send_subcmd(ctlr, req, 1, HZ); } static int joycon_enable_rumble(struct joycon_ctlr *ctlr, bool enable) @@ -577,7 +595,7 @@ static int joycon_enable_rumble(struct joycon_ctlr *ctlr, bool enable) req->data[0] = enable ? 0x01 : 0x00; hid_dbg(ctlr->hdev, "%s rumble\n", enable ? "enabling" : "disabling"); - return joycon_send_subcmd(ctlr, req, 1); + return joycon_send_subcmd(ctlr, req, 1, HZ/4); } static s32 joycon_map_stick_val(struct joycon_stick_cal *cal, s32 val) @@ -1081,7 +1099,7 @@ static int joycon_home_led_brightness_set(struct led_classdev *led, hid_dbg(hdev, "setting home led brightness\n"); mutex_lock(&ctlr->output_mutex); - ret = joycon_send_subcmd(ctlr, req, 5); + ret = joycon_send_subcmd(ctlr, req, 5, HZ/4); mutex_unlock(&ctlr->output_mutex); return ret; @@ -1378,16 +1396,16 @@ static int nintendo_hid_probe(struct hid_device *hdev, mutex_lock(&ctlr->output_mutex); /* if handshake command fails, assume ble pro controller */ if (hdev->product == USB_DEVICE_ID_NINTENDO_PROCON && - !joycon_send_usb(ctlr, JC_USB_CMD_HANDSHAKE)) { + !joycon_send_usb(ctlr, JC_USB_CMD_HANDSHAKE, HZ)) { hid_dbg(hdev, "detected USB controller\n"); /* set baudrate for improved latency */ - ret = joycon_send_usb(ctlr, JC_USB_CMD_BAUDRATE_3M); + ret = joycon_send_usb(ctlr, JC_USB_CMD_BAUDRATE_3M, HZ); if (ret) { hid_err(hdev, "Failed to set baudrate; ret=%d\n", ret); goto err_mutex; } /* handshake */ - ret = joycon_send_usb(ctlr, JC_USB_CMD_HANDSHAKE); + ret = joycon_send_usb(ctlr, JC_USB_CMD_HANDSHAKE, HZ); if (ret) { hid_err(hdev, "Failed handshake; ret=%d\n", ret); goto err_mutex; @@ -1396,7 +1414,7 @@ static int nintendo_hid_probe(struct hid_device *hdev, * Set no timeout (to keep controller in USB mode). * This doesn't send a response, so ignore the timeout. */ - joycon_send_usb(ctlr, JC_USB_CMD_NO_TIMEOUT); + joycon_send_usb(ctlr, JC_USB_CMD_NO_TIMEOUT, HZ/10); } /* get controller calibration data, and parse it */ From patchwork Sun Aug 23 04:41:50 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Daniel Ogorchock X-Patchwork-Id: 11731375 X-Patchwork-Delegate: jikos@jikos.cz Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 43993618 for ; Sun, 23 Aug 2020 04:42:35 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 2C3A2207DA for ; Sun, 23 Aug 2020 04:42:35 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b="YyiLAmjp" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726189AbgHWEmc (ORCPT ); Sun, 23 Aug 2020 00:42:32 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:59412 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1725981AbgHWEm2 (ORCPT ); Sun, 23 Aug 2020 00:42:28 -0400 Received: from mail-oi1-x241.google.com (mail-oi1-x241.google.com [IPv6:2607:f8b0:4864:20::241]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id DD3F6C061755 for ; Sat, 22 Aug 2020 21:42:27 -0700 (PDT) Received: by mail-oi1-x241.google.com with SMTP id e6so5322940oii.4 for ; Sat, 22 Aug 2020 21:42:27 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20161025; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=HmaQuY9GvPKnK7dP6NxoXULMSfyaxGANEaqSUTVFWt8=; b=YyiLAmjppbveySbArRXiZlq70L5GsxMKlH+yeZN62cTLKtME/rWftiKEdI0HJl3Sac WwG1oCd574A8w+Gg6SGxtUEwuzQGAbu7UPBtn7mbZTZqZkgETImTz/fvpJzBz3M5XtbE MAtmLU9mA5fMz/RHXKOvuylecy3+7UiUljowQ8ffscvfb5p1WlVHI9aRys9i1jl+gk6N DmkWZlEWYjjk6ICyijmBJpOU8oA+n+8Zv62vuBQecBhpLDNT2JnTBdwgBEn/tNSGD6HT Sm9RqvMPobR3/CWbp7w4dPMTNaaVStRum2e+6IWSMucVgfmSKoE9VZHFMIXib78B37bp xofg== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=HmaQuY9GvPKnK7dP6NxoXULMSfyaxGANEaqSUTVFWt8=; b=sYywXyB2dhGyZD2PX5XFnKaias4PcxbkoEjs6mfowZe1mo+hDna1l++2CEmx6Cp/8W scCPMlXlHx8MinT247iJlgalQF/TiBFBi/6NBmLpXFH6alQuilbobJUr1AqQB6kjBjgJ SZE3fJ0uxMMjixf6MXq/fXRoFdPkz12m3DdCOqMUEZlr/vRekRzx0EitpemDCGG8pozv q46VfJw8L84a0iJWC1/KsK7gDI87Od3W7syOnVtbFjqAf+KkzybX7I3hBDTyMdMYooKw /gB72Pdvk1kUcei7PDIYBSfgI93bqr82RQZxFInrrRIaQvfjXOSEIng/6K+a+3a4ooyc RX3Q== X-Gm-Message-State: AOAM533zi27dd8DOFdRMsGhkuMhQkNTYyQQkVifcXD5fp3vjm/Ovwv27 RAD5EZcq5yA6aPpYlwgOc7QK1VhIf+rK4vBP X-Google-Smtp-Source: ABdhPJy11gxzca/JGODtGoDxtHzuDcdYGVsy1ViASdfB4qwLLYqA1LujdgtFZ6IyLuAVqx3WEQXZZw== X-Received: by 2002:aca:56c1:: with SMTP id k184mr10505oib.26.1598157745854; Sat, 22 Aug 2020 21:42:25 -0700 (PDT) Received: from Arrakis.djogorchock.com ([136.33.205.58]) by smtp.gmail.com with ESMTPSA id z10sm1308572otk.6.2020.08.22.21.42.24 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Sat, 22 Aug 2020 21:42:25 -0700 (PDT) From: "Daniel J. Ogorchock" To: linux-input@vger.kernel.org Cc: thunderbird2k@gmail.com, blaws05@gmail.com, benjamin.tissoires@redhat.com, jikos@kernel.org, Roderick.Colenbrander@sony.com, svv@google.com, s.jegen@gmail.com, carmueller@gmail.com, pgriffais@valvesoftware.com, hadess@hadess.net, "Daniel J. Ogorchock" Subject: [PATCH v12 07/14] HID: nintendo: send subcommands after receiving input report Date: Sat, 22 Aug 2020 23:41:50 -0500 Message-Id: <20200823044157.339677-8-djogorchock@gmail.com> X-Mailer: git-send-email 2.28.0 In-Reply-To: <20200823044157.339677-1-djogorchock@gmail.com> References: <20200823044157.339677-1-djogorchock@gmail.com> MIME-Version: 1.0 Sender: linux-input-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-input@vger.kernel.org Waiting to send subcommands until right after receiving an input report drastically improves subcommand reliability. If the driver has finished initial controller configuration, it now waits until receiving an input report for all subcommands. Signed-off-by: Daniel J. Ogorchock --- drivers/hid/hid-nintendo.c | 33 +++++++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+) diff --git a/drivers/hid/hid-nintendo.c b/drivers/hid/hid-nintendo.c index 2638c6aff9d2..2ec099dc3869 100644 --- a/drivers/hid/hid-nintendo.c +++ b/drivers/hid/hid-nintendo.c @@ -328,6 +328,7 @@ struct joycon_ctlr { bool received_resp; u8 usb_ack_match; u8 subcmd_ack_match; + bool received_input_report; /* factory calibration data */ struct joycon_stick_cal left_stick_cal_x; @@ -381,6 +382,26 @@ static int joycon_hid_send_sync(struct joycon_ctlr *ctlr, u8 *data, size_t len, * doing one retry after a timeout appears to always work. */ while (tries--) { + /* + * If we are in the proper reporting mode, wait for an input + * report prior to sending the subcommand. This improves + * reliability considerably. + */ + if (ctlr->ctlr_state == JOYCON_CTLR_STATE_READ) { + unsigned long flags; + + spin_lock_irqsave(&ctlr->lock, flags); + ctlr->received_input_report = false; + spin_unlock_irqrestore(&ctlr->lock, flags); + ret = wait_event_timeout(ctlr->wait, + ctlr->received_input_report, + HZ / 4); + /* We will still proceed, even with a timeout here */ + if (!ret) + hid_warn(ctlr->hdev, + "timeout waiting for input report\n"); + } + ret = __joycon_hid_send(ctlr->hdev, data, len); if (ret < 0) { memset(ctlr->input_buf, 0, JC_MAX_RESP_SIZE); @@ -753,6 +774,18 @@ static void joycon_parse_report(struct joycon_ctlr *ctlr, } input_sync(dev); + + /* + * Immediately after receiving a report is the most reliable time to + * send a subcommand to the controller. Wake any subcommand senders + * waiting for a report. + */ + if (unlikely(mutex_is_locked(&ctlr->output_mutex))) { + spin_lock_irqsave(&ctlr->lock, flags); + ctlr->received_input_report = true; + spin_unlock_irqrestore(&ctlr->lock, flags); + wake_up(&ctlr->wait); + } } static void joycon_rumble_worker(struct work_struct *work) From patchwork Sun Aug 23 04:41:51 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Daniel Ogorchock X-Patchwork-Id: 11731377 X-Patchwork-Delegate: jikos@jikos.cz Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 42324618 for ; Sun, 23 Aug 2020 04:42:41 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 28F952078D for ; Sun, 23 Aug 2020 04:42:41 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b="M5QYTRYl" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726345AbgHWEmd (ORCPT ); Sun, 23 Aug 2020 00:42:33 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:59414 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726056AbgHWEm2 (ORCPT ); Sun, 23 Aug 2020 00:42:28 -0400 Received: from mail-ot1-x342.google.com (mail-ot1-x342.google.com [IPv6:2607:f8b0:4864:20::342]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 01973C0613ED for ; Sat, 22 Aug 2020 21:42:27 -0700 (PDT) Received: by mail-ot1-x342.google.com with SMTP id 5so1883901otp.12 for ; Sat, 22 Aug 2020 21:42:27 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20161025; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=5BapThEX9wd+p/pPXL0LmGX/oPuRXFrOhFaZ1kMOrZ4=; b=M5QYTRYlo3JQKQdXsrOietayXM5x//64dak4Cnkf0M99VPgCQUJcloDvDw63fNKXTp CCAqkzhcfKp7lOEj2YRaUo7xV0v/GlVTTgrIyr/tIxVG2f7ifyemHsHSlTCEhDtf4LLv gYsoRBcoO6bohU1MVT0PSzNnRnewcWUHzRviKGjQ6cc8rlJHcWsTLG9BEepRlQbazaZu IgTBfJTZwgYgl6oi1IqTUVnQIJ5u4Ld+mh7bpS6DMgwRpF96+FYVIYL/3S7FGk7rhaBV bbeKMfUJ70uy0ffRE5npkDbRUwAustomRqqe1HQ+bkBCHWHurbag7ixnTEaHjBEAgOHH V/dw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=5BapThEX9wd+p/pPXL0LmGX/oPuRXFrOhFaZ1kMOrZ4=; b=XBJ2/OpCF5AOqvIUY8WiNq1Jp9xT9+RYkgzUYkF4j7iRhHEcEwbQkeeNeKAYGyfNLB IU84uebGK/FRHk9Cg+OuKgdy+0OGtih221p4xAyCTfNOLLdl7BoNDYhDRMDCa0wc12YZ xIoBWRuwEK+yE7WGHVXl48xnWd49nSthrtusCDH5uF6HXjO7OqVdoCJH8TPgU9InUfPz //CWe/PUvh8WZdEJt+cY24bLmEnxQdm33lFJPb2aKccgJN/63zUXGl2CSxZhDLqnx8HZ tsZL5eU8/qJ3aDgwQDlzd5zYEVLEJbs7zC/ywgniknBqd7AFUBWNCTBnIlCNpMP8JeNe UN6w== X-Gm-Message-State: AOAM532XT5PxlhnSRyFBSHZF3wdtNrjKyNfOz/bYa/eIgusGOFtoJ+UM IyO50Zx7WVAxk4etMFX+ZdXYMHJh+k41RLEg X-Google-Smtp-Source: ABdhPJyMdHQReryhcn6cFU5gFQ1RvjXWKtZokxgkJMxMUNqv7r9Q7swTONo4FwHk8Wg2w+c4MqPdnQ== X-Received: by 2002:a9d:942:: with SMTP id 60mr281843otp.32.1598157747085; Sat, 22 Aug 2020 21:42:27 -0700 (PDT) Received: from Arrakis.djogorchock.com ([136.33.205.58]) by smtp.gmail.com with ESMTPSA id z10sm1308572otk.6.2020.08.22.21.42.26 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Sat, 22 Aug 2020 21:42:26 -0700 (PDT) From: "Daniel J. Ogorchock" To: linux-input@vger.kernel.org Cc: thunderbird2k@gmail.com, blaws05@gmail.com, benjamin.tissoires@redhat.com, jikos@kernel.org, Roderick.Colenbrander@sony.com, svv@google.com, s.jegen@gmail.com, carmueller@gmail.com, pgriffais@valvesoftware.com, hadess@hadess.net, "Daniel J. Ogorchock" Subject: [PATCH v12 08/14] HID: nintendo: reduce device removal subcommand errors Date: Sat, 22 Aug 2020 23:41:51 -0500 Message-Id: <20200823044157.339677-9-djogorchock@gmail.com> X-Mailer: git-send-email 2.28.0 In-Reply-To: <20200823044157.339677-1-djogorchock@gmail.com> References: <20200823044157.339677-1-djogorchock@gmail.com> MIME-Version: 1.0 Sender: linux-input-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-input@vger.kernel.org This patch fixes meaningless error output from trying to send subcommands immediately after controller removal. It now disables subcommands as soon as possible on removal. Signed-off-by: Daniel J. Ogorchock --- drivers/hid/hid-nintendo.c | 24 ++++++++++++++++++++++-- 1 file changed, 22 insertions(+), 2 deletions(-) diff --git a/drivers/hid/hid-nintendo.c b/drivers/hid/hid-nintendo.c index 2ec099dc3869..f2864fd9fc5d 100644 --- a/drivers/hid/hid-nintendo.c +++ b/drivers/hid/hid-nintendo.c @@ -230,6 +230,7 @@ static const struct joycon_rumble_amp_data joycon_rumble_amplitudes[] = { enum joycon_ctlr_state { JOYCON_CTLR_STATE_INIT, JOYCON_CTLR_STATE_READ, + JOYCON_CTLR_STATE_REMOVED, }; struct joycon_stick_cal { @@ -451,6 +452,14 @@ static int joycon_send_subcmd(struct joycon_ctlr *ctlr, unsigned long flags; spin_lock_irqsave(&ctlr->lock, flags); + /* + * If the controller has been removed, just return ENODEV so the LED + * subsystem doesn't print invalid errors on removal. + */ + if (ctlr->ctlr_state == JOYCON_CTLR_STATE_REMOVED) { + spin_unlock_irqrestore(&ctlr->lock, flags); + return -ENODEV; + } memcpy(subcmd->rumble_data, ctlr->rumble_data[ctlr->rumble_queue_tail], JC_RUMBLE_DATA_SIZE); spin_unlock_irqrestore(&ctlr->lock, flags); @@ -800,10 +809,13 @@ static void joycon_rumble_worker(struct work_struct *work) mutex_lock(&ctlr->output_mutex); ret = joycon_enable_rumble(ctlr, true); mutex_unlock(&ctlr->output_mutex); - if (ret < 0) - hid_warn(ctlr->hdev, "Failed to set rumble; e=%d", ret); + /* -ENODEV means the controller was just unplugged */ spin_lock_irqsave(&ctlr->lock, flags); + if (ret < 0 && ret != -ENODEV && + ctlr->ctlr_state != JOYCON_CTLR_STATE_REMOVED) + hid_warn(ctlr->hdev, "Failed to set rumble; e=%d", ret); + ctlr->rumble_msecs = jiffies_to_msecs(jiffies); if (ctlr->rumble_queue_tail != ctlr->rumble_queue_head) { if (++ctlr->rumble_queue_tail >= JC_RUMBLE_QUEUE_SIZE) @@ -1517,9 +1529,17 @@ static int nintendo_hid_probe(struct hid_device *hdev, static void nintendo_hid_remove(struct hid_device *hdev) { struct joycon_ctlr *ctlr = hid_get_drvdata(hdev); + unsigned long flags; hid_dbg(hdev, "remove\n"); + + /* Prevent further attempts at sending subcommands. */ + spin_lock_irqsave(&ctlr->lock, flags); + ctlr->ctlr_state = JOYCON_CTLR_STATE_REMOVED; + spin_unlock_irqrestore(&ctlr->lock, flags); + destroy_workqueue(ctlr->rumble_queue); + hid_hw_close(hdev); hid_hw_stop(hdev); } From patchwork Sun Aug 23 04:41:52 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Daniel Ogorchock X-Patchwork-Id: 11731381 X-Patchwork-Delegate: jikos@jikos.cz Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 8BA641731 for ; Sun, 23 Aug 2020 04:42:41 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 72E392078D for ; Sun, 23 Aug 2020 04:42:41 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b="WYbqcBjx" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726079AbgHWEmj (ORCPT ); Sun, 23 Aug 2020 00:42:39 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:59398 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1725838AbgHWEm3 (ORCPT ); Sun, 23 Aug 2020 00:42:29 -0400 Received: from mail-ot1-x343.google.com (mail-ot1-x343.google.com [IPv6:2607:f8b0:4864:20::343]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id EA03DC061575 for ; Sat, 22 Aug 2020 21:42:28 -0700 (PDT) Received: by mail-ot1-x343.google.com with SMTP id a65so4713891otc.8 for ; Sat, 22 Aug 2020 21:42:28 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20161025; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=I75VHnKCnsj4GcNHVnPcKdSqnJ8rvRDJ1kriJis89vk=; b=WYbqcBjxL49EIWutYNrV1uNfbyleYTycfqOllzo8EiBCmSpjVnR0DD1c+ZJ/0CdPHL 6iFrAtnC3l2Knpj5383bzpWNy+PC9PcOC3vTZa4WlNP6vbV8J4rrOveu3pZY8MM9x6d8 A/vtUHsZYoOjMbvXoVY53oVw5JtYcapYSJFBqHTM+vj2LuQUq/firT46GVjLEMr4M76i ZMaX3pWPtsRYnpA4xWvr2kK/ciEEHMYmtz0ZtjaD3D+UTuuhmZS6sPtsQ6oBfH8z7I+f z1qSy7T61u5jnEsx0sFCU44BW0OkbwzdD6DP/yGiCYu2XLI1EZrXIbGkyAz8CQ/6gNYu 3rew== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=I75VHnKCnsj4GcNHVnPcKdSqnJ8rvRDJ1kriJis89vk=; b=a6EoNZY2gDztrqN9eRIMYuD/bQ3ZCpUBRGubTEC3fgpGvtX2kgR3gOU3CR/bk012UW tXGsbaoWoXmwaKCoRJ1SqEWlaNWvO1f/WcLRym9GSA5oIBpc92mytPG/ebrx5w6SGxVW /RuguhYJOZN4clAoIYc/bJSAO44XnVhzlEpEI62GwLMe9VvsBA/blgZTicgQnJABd3AN jrMoVkDjT8e0aFw4G4AaQSHZKIeEujCvtJkf7V0cVSIlihc3TvchziDiNO/L4UyZnPyV 98ITLE/6a9kozAw9bTXccUPce/rotLzMZI06QcEXxe4AFvAKRraN3qpD+5wOOWGlLoh7 GqRg== X-Gm-Message-State: AOAM530wzKFWICLPZ9kuDnBRbEdoTvKKlo99Zp8JreCpKzJYxjAYl0n4 Q3kNOSLIge3X9fEl2N5Oa0X6FHQ4+tzz1Q8J X-Google-Smtp-Source: ABdhPJywH8RfbMh+PdNujnSin3j1IKeuXtTBEXgu2ilm5vpv+hclah4bWbUL7eM/uH72ezBSTcNvYA== X-Received: by 2002:a05:6830:1d8e:: with SMTP id y14mr263748oti.129.1598157748183; Sat, 22 Aug 2020 21:42:28 -0700 (PDT) Received: from Arrakis.djogorchock.com ([136.33.205.58]) by smtp.gmail.com with ESMTPSA id z10sm1308572otk.6.2020.08.22.21.42.27 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Sat, 22 Aug 2020 21:42:27 -0700 (PDT) From: "Daniel J. Ogorchock" To: linux-input@vger.kernel.org Cc: thunderbird2k@gmail.com, blaws05@gmail.com, benjamin.tissoires@redhat.com, jikos@kernel.org, Roderick.Colenbrander@sony.com, svv@google.com, s.jegen@gmail.com, carmueller@gmail.com, pgriffais@valvesoftware.com, hadess@hadess.net, "Daniel J. Ogorchock" Subject: [PATCH v12 09/14] HID: nintendo: patch hw version for userspace HID mappings Date: Sat, 22 Aug 2020 23:41:52 -0500 Message-Id: <20200823044157.339677-10-djogorchock@gmail.com> X-Mailer: git-send-email 2.28.0 In-Reply-To: <20200823044157.339677-1-djogorchock@gmail.com> References: <20200823044157.339677-1-djogorchock@gmail.com> MIME-Version: 1.0 Sender: linux-input-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-input@vger.kernel.org This patch sets the most significant bit of the hid hw version to allow userspace to distinguish between this driver's input mappings vs. the default hid mappings. This prevents breaking userspace applications that use SDL2 for gamepad input, allowing them to distinguish the mappings based on the version. Signed-off-by: Daniel J. Ogorchock --- drivers/hid/hid-nintendo.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/hid/hid-nintendo.c b/drivers/hid/hid-nintendo.c index f2864fd9fc5d..c2f7dc83d875 100644 --- a/drivers/hid/hid-nintendo.c +++ b/drivers/hid/hid-nintendo.c @@ -1423,6 +1423,15 @@ static int nintendo_hid_probe(struct hid_device *hdev, goto err_wq; } + /* + * Patch the hw version of pro controller/joycons, so applications can + * distinguish between the default HID mappings and the mappings defined + * by the Linux game controller spec. This is important for the SDL2 + * library, which has a game controller database, which uses device ids + * in combination with version as a key. + */ + hdev->version |= 0x8000; + ret = hid_hw_start(hdev, HID_CONNECT_HIDRAW); if (ret) { hid_err(hdev, "HW start failed\n"); From patchwork Sun Aug 23 04:41:53 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Daniel Ogorchock X-Patchwork-Id: 11731383 X-Patchwork-Delegate: jikos@jikos.cz Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id E28791575 for ; Sun, 23 Aug 2020 04:42:41 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id CAA592078D for ; Sun, 23 Aug 2020 04:42:41 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b="mJbP95hb" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1725838AbgHWEml (ORCPT ); Sun, 23 Aug 2020 00:42:41 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:59424 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726187AbgHWEma (ORCPT ); Sun, 23 Aug 2020 00:42:30 -0400 Received: from mail-oi1-x241.google.com (mail-oi1-x241.google.com [IPv6:2607:f8b0:4864:20::241]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id E6BE4C061573 for ; Sat, 22 Aug 2020 21:42:29 -0700 (PDT) Received: by mail-oi1-x241.google.com with SMTP id z195so2275420oia.6 for ; Sat, 22 Aug 2020 21:42:29 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20161025; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=D6lVl63bMnKUgqWp+1jrNfFdwd7UjDCrhoZJv/DEscI=; b=mJbP95hbrRyHrbgtpUE3a53x14icobXb1QN/0YVXqvseH1dPH/+FhlY62xAc0LeKLf QRZTQln37XzEpOSQoPnylSPNbIyx/eKVlNr8NTv72JUA5RTx35Hwz/05IJFtsyd0lfOX VV06CVMZWV8bFKOlN51Ob72zd5vdbBz4kQfn2kPzXMoJSb6wroS/vsQJul6JrLfkYuAO aXvUeyI800tRBMtv4VvyyllFsnC5dW+bLWqlfDHBw6CknwdacxROsP8AOUQzn7iz7BJE y3dcz+QEAjmyUKfXiF9vevcWaYhso4JmZ739NFMuHJrEH4S3DMujYCPD9PTLpMI749ps wdbg== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=D6lVl63bMnKUgqWp+1jrNfFdwd7UjDCrhoZJv/DEscI=; b=Z+hVJX2MOhJWDloeSonN0QBehyJcMHtZm4avy/f8DM1O0ybXrJAixtA8GyiEpV6lov Ud1YbJBPGOj8p0ITqlpe5z6thKEM7nfGg2MtcGYIfv8xAScjMY8vVOiVBYN/GCVeoLBN 61aAAbARuM8lhruK4jJoV6Bqw1+DQ0nQRe1DLAsPfxYVCaw8ejBdWbVn0IzSRrjZA5y7 WkVVe/XChl0ZSzQ4rr+7wmYfG/DVNwt2Jadg/AK67GNhaORnWUJCeOgRdhj6FpWbVqW4 QX0UjT3is5gK0Phff4G93IL9c85pmnhwUvU+sFvJucqwCySpOrdUNfP6Mrn5KdsQlcIA cItQ== X-Gm-Message-State: AOAM530zf0dd34HuaW8IaMIABSgShis0RWjmapOPD9prEThQXqp3R5/P ZRWtFqrs6seJDWgAK+N6vDxl580t4jc1CNn2 X-Google-Smtp-Source: ABdhPJwpH8o6L4Bvv53daOT7qqyDKOnATjNAFGpYBdeAYinJDbXsBTnTVt2LEJuffFvqgkPhpaKRnQ== X-Received: by 2002:aca:410:: with SMTP id 16mr105111oie.67.1598157749212; Sat, 22 Aug 2020 21:42:29 -0700 (PDT) Received: from Arrakis.djogorchock.com ([136.33.205.58]) by smtp.gmail.com with ESMTPSA id z10sm1308572otk.6.2020.08.22.21.42.28 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Sat, 22 Aug 2020 21:42:28 -0700 (PDT) From: "Daniel J. Ogorchock" To: linux-input@vger.kernel.org Cc: thunderbird2k@gmail.com, blaws05@gmail.com, benjamin.tissoires@redhat.com, jikos@kernel.org, Roderick.Colenbrander@sony.com, svv@google.com, s.jegen@gmail.com, carmueller@gmail.com, pgriffais@valvesoftware.com, hadess@hadess.net, "Daniel J. Ogorchock" Subject: [PATCH v12 10/14] HID: nintendo: set controller uniq to MAC Date: Sat, 22 Aug 2020 23:41:53 -0500 Message-Id: <20200823044157.339677-11-djogorchock@gmail.com> X-Mailer: git-send-email 2.28.0 In-Reply-To: <20200823044157.339677-1-djogorchock@gmail.com> References: <20200823044157.339677-1-djogorchock@gmail.com> MIME-Version: 1.0 Sender: linux-input-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-input@vger.kernel.org This patch sets the input device's uniq identifier to the controller's MAC address. This is useful for future association between an IMU input device with the normal input device as well as associating the controller with any serial joy-con driver. Signed-off-by: Daniel J. Ogorchock --- drivers/hid/hid-nintendo.c | 45 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 45 insertions(+) diff --git a/drivers/hid/hid-nintendo.c b/drivers/hid/hid-nintendo.c index c2f7dc83d875..85870569cb49 100644 --- a/drivers/hid/hid-nintendo.c +++ b/drivers/hid/hid-nintendo.c @@ -319,6 +319,8 @@ struct joycon_ctlr { struct led_classdev home_led; enum joycon_ctlr_state ctlr_state; spinlock_t lock; + u8 mac_addr[6]; + char *mac_addr_str; /* The following members are used for synchronous sends/receives */ enum joycon_msg_type msg_type; @@ -1005,6 +1007,7 @@ static int joycon_input_create(struct joycon_ctlr *ctlr) ctlr->input->id.vendor = hdev->vendor; ctlr->input->id.product = hdev->product; ctlr->input->id.version = hdev->version; + ctlr->input->uniq = ctlr->mac_addr_str; ctlr->input->name = name; input_set_drvdata(ctlr->input, ctlr); @@ -1317,6 +1320,41 @@ static int joycon_power_supply_create(struct joycon_ctlr *ctlr) return 0; } +static int joycon_read_mac(struct joycon_ctlr *ctlr) +{ + int ret; + int i; + int j; + struct joycon_subcmd_request req = { 0 }; + struct joycon_input_report *report; + + req.subcmd_id = JC_SUBCMD_REQ_DEV_INFO; + ret = joycon_send_subcmd(ctlr, &req, 0, HZ); + if (ret) { + hid_err(ctlr->hdev, "Failed to get joycon info; ret=%d\n", ret); + return ret; + } + + report = (struct joycon_input_report *)ctlr->input_buf; + + for (i = 4, j = 0; j < 6; i++, j++) + ctlr->mac_addr[j] = report->reply.data[i]; + + ctlr->mac_addr_str = devm_kasprintf(&ctlr->hdev->dev, GFP_KERNEL, + "%02X:%02X:%02X:%02X:%02X:%02X", + ctlr->mac_addr[0], + ctlr->mac_addr[1], + ctlr->mac_addr[2], + ctlr->mac_addr[3], + ctlr->mac_addr[4], + ctlr->mac_addr[5]); + if (!ctlr->mac_addr_str) + return -ENOMEM; + hid_info(ctlr->hdev, "controller MAC = %s\n", ctlr->mac_addr_str); + + return 0; +} + /* Common handler for parsing inputs */ static int joycon_ctlr_read_handler(struct joycon_ctlr *ctlr, u8 *data, int size) @@ -1495,6 +1533,13 @@ static int nintendo_hid_probe(struct hid_device *hdev, goto err_mutex; } + ret = joycon_read_mac(ctlr); + if (ret) { + hid_err(hdev, "Failed to retrieve controller MAC; ret=%d\n", + ret); + goto err_close; + } + mutex_unlock(&ctlr->output_mutex); /* Initialize the leds */ From patchwork Sun Aug 23 04:41:54 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Daniel Ogorchock X-Patchwork-Id: 11731389 X-Patchwork-Delegate: jikos@jikos.cz Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id E5270618 for ; Sun, 23 Aug 2020 04:42:42 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id C82442074D for ; Sun, 23 Aug 2020 04:42:42 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b="nxZ0S7Rq" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726231AbgHWEmm (ORCPT ); Sun, 23 Aug 2020 00:42:42 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:59412 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1725139AbgHWEmc (ORCPT ); Sun, 23 Aug 2020 00:42:32 -0400 Received: from mail-oi1-x22e.google.com (mail-oi1-x22e.google.com [IPv6:2607:f8b0:4864:20::22e]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id B9ECFC061574 for ; Sat, 22 Aug 2020 21:42:31 -0700 (PDT) Received: by mail-oi1-x22e.google.com with SMTP id o21so5294803oie.12 for ; Sat, 22 Aug 2020 21:42:31 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20161025; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=bH7VrUrTVBufhl4TaVIhyGv4c5TsCHpAmUASusmokbQ=; b=nxZ0S7RqSZwD4V76iptS96cxBwAFtR+vLm19KFD+A4vanv7Lu35xKjjki6L68FoFi4 or8xdaORt5SaD+iKYqI30pWBDKyZ1qae4zEcvvtuKYWBT1ohEjbu6u7m0fxGjykpawzP V5MlEnGAdUvF96ReEC+w9WrqYnm6im5EcuSQ9GX2rsWSgdJIFmrmNkEgw+jfl8+n0Qvn O1TPVVCVL0X1eoZU2CaJiIhna/jkEPz5lrrmgEl8umldqRsdifV2/GV1dpa47TomSQp2 tp43L+ZF11/pAw1vwa5Cdq2EpYO9n0rW9bbWwvmLx1ab9rqF6S1ehNASLppgQvUNREwO N6FA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=bH7VrUrTVBufhl4TaVIhyGv4c5TsCHpAmUASusmokbQ=; b=WsFOo/VCOh2QYbsOgCPnJ59PUU8YgAwItd3jkZZIrZD6tg/2Z3PfPOyUreGQ2Rz31C F+A1eb2cz7FoLR1ZjM1V3D8zHIWzwMgxFARFXUQxx5MLogfNRVieA5xyBzWM0UoeGOOc Iv+XvVTUCNqRHAsqEDesdqu40RPpxrj/OTUD0GLEf9OyP7bbBd6wIXWGdRIMmesppx4M dZQrjyo5PEX5Vn4uxC4tI0BNYubzdSsp19v0Nf2cOpCGXJFVZRkVaMpPIySjY0bFiWIk uax+5gwixpi0EtdyDTqB13KnKwjo6m3MJ0CiJaYqKy/G/B390cz55fTyfnzy1rzkZ4OG zsMQ== X-Gm-Message-State: AOAM532yzSU3F5z3PEuoMR2jKBnApIfLsgavrhO3ZecWJbPDAvYyk2x/ NcDxFpHFTlTSvpmYc0knmSGK3yFVo5d1w4sU X-Google-Smtp-Source: ABdhPJzeWdIvvTIihT8hiZfJolLE1rHNNH4rGeWu+voAxaVwb51IlwyiccqHc6IR8/N4UC+nU+nq4g== X-Received: by 2002:aca:fd8d:: with SMTP id b135mr108355oii.27.1598157750290; Sat, 22 Aug 2020 21:42:30 -0700 (PDT) Received: from Arrakis.djogorchock.com ([136.33.205.58]) by smtp.gmail.com with ESMTPSA id z10sm1308572otk.6.2020.08.22.21.42.29 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Sat, 22 Aug 2020 21:42:29 -0700 (PDT) From: "Daniel J. Ogorchock" To: linux-input@vger.kernel.org Cc: thunderbird2k@gmail.com, blaws05@gmail.com, benjamin.tissoires@redhat.com, jikos@kernel.org, Roderick.Colenbrander@sony.com, svv@google.com, s.jegen@gmail.com, carmueller@gmail.com, pgriffais@valvesoftware.com, hadess@hadess.net, "Daniel J. Ogorchock" Subject: [PATCH v12 11/14] HID: nintendo: add support for charging grip Date: Sat, 22 Aug 2020 23:41:54 -0500 Message-Id: <20200823044157.339677-12-djogorchock@gmail.com> X-Mailer: git-send-email 2.28.0 In-Reply-To: <20200823044157.339677-1-djogorchock@gmail.com> References: <20200823044157.339677-1-djogorchock@gmail.com> MIME-Version: 1.0 Sender: linux-input-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-input@vger.kernel.org This patch adds support for the joy-con charging grip. The peripheral essentially behaves the same as a pro controller, but with two joy-cons attached to the grip. However the grip exposes the two joy-cons as separate hid devices, so extra handling is required. The joy-con is queried to check if it is a right or left joy-con (since the product ID is identical between left/right when using the grip). Since controller model detection is now more complicated, the various checks for hid product values have been replaced with helper macros to reduce code duplication. Signed-off-by: Daniel J. Ogorchock --- drivers/hid/hid-ids.h | 1 + drivers/hid/hid-nintendo.c | 67 ++++++++++++++++++++++++++++++-------- 2 files changed, 55 insertions(+), 13 deletions(-) diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 605c4bdaeb85..1cd9125d0233 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -881,6 +881,7 @@ #define USB_DEVICE_ID_NINTENDO_JOYCONL 0x2006 #define USB_DEVICE_ID_NINTENDO_JOYCONR 0x2007 #define USB_DEVICE_ID_NINTENDO_PROCON 0x2009 +#define USB_DEVICE_ID_NINTENDO_CHRGGRIP 0x200E #define USB_VENDOR_ID_NOVATEK 0x0603 #define USB_DEVICE_ID_NOVATEK_PCT 0x0600 diff --git a/drivers/hid/hid-nintendo.c b/drivers/hid/hid-nintendo.c index 85870569cb49..afb461d765b1 100644 --- a/drivers/hid/hid-nintendo.c +++ b/drivers/hid/hid-nintendo.c @@ -233,6 +233,13 @@ enum joycon_ctlr_state { JOYCON_CTLR_STATE_REMOVED, }; +/* Controller type received as part of device info */ +enum joycon_ctlr_type { + JOYCON_CTLR_TYPE_JCL = 0x01, + JOYCON_CTLR_TYPE_JCR = 0x02, + JOYCON_CTLR_TYPE_PRO = 0x03, +}; + struct joycon_stick_cal { s32 max; s32 min; @@ -321,6 +328,7 @@ struct joycon_ctlr { spinlock_t lock; u8 mac_addr[6]; char *mac_addr_str; + enum joycon_ctlr_type ctlr_type; /* The following members are used for synchronous sends/receives */ enum joycon_msg_type msg_type; @@ -359,6 +367,26 @@ struct joycon_ctlr { u16 rumble_rh_freq; }; +/* Helper macros for checking controller type */ +#define jc_type_is_joycon(ctlr) \ + (ctlr->hdev->product == USB_DEVICE_ID_NINTENDO_JOYCONL || \ + ctlr->hdev->product == USB_DEVICE_ID_NINTENDO_JOYCONR || \ + ctlr->hdev->product == USB_DEVICE_ID_NINTENDO_CHRGGRIP) +#define jc_type_is_procon(ctlr) \ + (ctlr->hdev->product == USB_DEVICE_ID_NINTENDO_PROCON) +#define jc_type_is_chrggrip(ctlr) \ + (ctlr->hdev->product == USB_DEVICE_ID_NINTENDO_CHRGGRIP) + +/* Does this controller have inputs associated with left joycon? */ +#define jc_type_has_left(ctlr) \ + (ctlr->ctlr_type == JOYCON_CTLR_TYPE_JCL || \ + ctlr->ctlr_type == JOYCON_CTLR_TYPE_PRO) + +/* Does this controller have inputs associated with right joycon? */ +#define jc_type_has_right(ctlr) \ + (ctlr->ctlr_type == JOYCON_CTLR_TYPE_JCR || \ + ctlr->ctlr_type == JOYCON_CTLR_TYPE_PRO) + static int __joycon_hid_send(struct hid_device *hdev, u8 *data, size_t len) { u8 *buf; @@ -655,7 +683,6 @@ static void joycon_parse_report(struct joycon_ctlr *ctlr, unsigned long flags; u8 tmp; u32 btns; - u32 id = ctlr->hdev->product; unsigned long msecs = jiffies_to_msecs(jiffies); spin_lock_irqsave(&ctlr->lock, flags); @@ -694,7 +721,7 @@ static void joycon_parse_report(struct joycon_ctlr *ctlr, /* Parse the buttons and sticks */ btns = hid_field_extract(ctlr->hdev, rep->button_status, 0, 24); - if (id != USB_DEVICE_ID_NINTENDO_JOYCONR) { + if (jc_type_has_left(ctlr)) { u16 raw_x; u16 raw_y; s32 x; @@ -718,7 +745,7 @@ static void joycon_parse_report(struct joycon_ctlr *ctlr, input_report_key(dev, BTN_THUMBL, btns & JC_BTN_LSTICK); input_report_key(dev, BTN_Z, btns & JC_BTN_CAP); - if (id != USB_DEVICE_ID_NINTENDO_PROCON) { + if (jc_type_is_joycon(ctlr)) { /* Report the S buttons as the non-existent triggers */ input_report_key(dev, BTN_TR, btns & JC_BTN_SL_L); input_report_key(dev, BTN_TR2, btns & JC_BTN_SR_L); @@ -750,7 +777,7 @@ static void joycon_parse_report(struct joycon_ctlr *ctlr, input_report_abs(dev, ABS_HAT0Y, haty); } } - if (id != USB_DEVICE_ID_NINTENDO_JOYCONL) { + if (jc_type_has_right(ctlr)) { u16 raw_x; u16 raw_y; s32 x; @@ -770,7 +797,7 @@ static void joycon_parse_report(struct joycon_ctlr *ctlr, /* report buttons */ input_report_key(dev, BTN_TR, btns & JC_BTN_R); input_report_key(dev, BTN_TR2, btns & JC_BTN_ZR); - if (id != USB_DEVICE_ID_NINTENDO_PROCON) { + if (jc_type_is_joycon(ctlr)) { /* Report the S buttons as the non-existent triggers */ input_report_key(dev, BTN_TL, btns & JC_BTN_SL_R); input_report_key(dev, BTN_TL2, btns & JC_BTN_SR_R); @@ -989,6 +1016,12 @@ static int joycon_input_create(struct joycon_ctlr *ctlr) case USB_DEVICE_ID_NINTENDO_PROCON: name = "Nintendo Switch Pro Controller"; break; + case USB_DEVICE_ID_NINTENDO_CHRGGRIP: + if (jc_type_has_left(ctlr)) + name = "Nintendo Switch Left Joy-Con (Grip)"; + else + name = "Nintendo Switch Right Joy-Con (Grip)"; + break; case USB_DEVICE_ID_NINTENDO_JOYCONL: name = "Nintendo Switch Left Joy-Con"; break; @@ -1011,9 +1044,8 @@ static int joycon_input_create(struct joycon_ctlr *ctlr) ctlr->input->name = name; input_set_drvdata(ctlr->input, ctlr); - /* set up sticks and buttons */ - if (hdev->product != USB_DEVICE_ID_NINTENDO_JOYCONR) { + if (jc_type_has_left(ctlr)) { input_set_abs_params(ctlr->input, ABS_X, -JC_MAX_STICK_MAG, JC_MAX_STICK_MAG, JC_STICK_FUZZ, JC_STICK_FLAT); @@ -1039,7 +1071,7 @@ static int joycon_input_create(struct joycon_ctlr *ctlr) JC_DPAD_FUZZ, JC_DPAD_FLAT); } } - if (hdev->product != USB_DEVICE_ID_NINTENDO_JOYCONL) { + if (jc_type_has_right(ctlr)) { input_set_abs_params(ctlr->input, ABS_RX, -JC_MAX_STICK_MAG, JC_MAX_STICK_MAG, JC_STICK_FUZZ, JC_STICK_FLAT); @@ -1207,7 +1239,7 @@ static int joycon_leds_create(struct joycon_ctlr *ctlr) mutex_unlock(&joycon_input_num_mutex); /* configure the home LED */ - if (ctlr->hdev->product != USB_DEVICE_ID_NINTENDO_JOYCONL) { + if (jc_type_has_right(ctlr)) { name = devm_kasprintf(dev, GFP_KERNEL, "%s:%s", d_name, "home"); if (!name) return ret; @@ -1320,7 +1352,7 @@ static int joycon_power_supply_create(struct joycon_ctlr *ctlr) return 0; } -static int joycon_read_mac(struct joycon_ctlr *ctlr) +static int joycon_read_info(struct joycon_ctlr *ctlr) { int ret; int i; @@ -1352,6 +1384,9 @@ static int joycon_read_mac(struct joycon_ctlr *ctlr) return -ENOMEM; hid_info(ctlr->hdev, "controller MAC = %s\n", ctlr->mac_addr_str); + /* Retrieve the type so we can distinguish for charging grip */ + ctlr->ctlr_type = report->reply.data[2]; + return 0; } @@ -1487,7 +1522,7 @@ static int nintendo_hid_probe(struct hid_device *hdev, /* Initialize the controller */ mutex_lock(&ctlr->output_mutex); /* if handshake command fails, assume ble pro controller */ - if (hdev->product == USB_DEVICE_ID_NINTENDO_PROCON && + if ((jc_type_is_procon(ctlr) || jc_type_is_chrggrip(ctlr)) && !joycon_send_usb(ctlr, JC_USB_CMD_HANDSHAKE, HZ)) { hid_dbg(hdev, "detected USB controller\n"); /* set baudrate for improved latency */ @@ -1507,6 +1542,10 @@ static int nintendo_hid_probe(struct hid_device *hdev, * This doesn't send a response, so ignore the timeout. */ joycon_send_usb(ctlr, JC_USB_CMD_NO_TIMEOUT, HZ/10); + } else if (jc_type_is_chrggrip(ctlr)) { + hid_err(hdev, "Failed charging grip handshake\n"); + ret = -ETIMEDOUT; + goto err_mutex; } /* get controller calibration data, and parse it */ @@ -1533,9 +1572,9 @@ static int nintendo_hid_probe(struct hid_device *hdev, goto err_mutex; } - ret = joycon_read_mac(ctlr); + ret = joycon_read_info(ctlr); if (ret) { - hid_err(hdev, "Failed to retrieve controller MAC; ret=%d\n", + hid_err(hdev, "Failed to retrieve controller info; ret=%d\n", ret); goto err_close; } @@ -1603,6 +1642,8 @@ static const struct hid_device_id nintendo_hid_devices[] = { USB_DEVICE_ID_NINTENDO_PROCON) }, { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_NINTENDO, USB_DEVICE_ID_NINTENDO_PROCON) }, + { HID_USB_DEVICE(USB_VENDOR_ID_NINTENDO, + USB_DEVICE_ID_NINTENDO_CHRGGRIP) }, { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_NINTENDO, USB_DEVICE_ID_NINTENDO_JOYCONL) }, { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_NINTENDO, From patchwork Sun Aug 23 04:41:55 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Daniel Ogorchock X-Patchwork-Id: 11731387 X-Patchwork-Delegate: jikos@jikos.cz Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 95C821731 for ; Sun, 23 Aug 2020 04:42:42 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 785E72078D for ; Sun, 23 Aug 2020 04:42:42 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b="LdVuAjut" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1725981AbgHWEml (ORCPT ); Sun, 23 Aug 2020 00:42:41 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:59414 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726231AbgHWEmc (ORCPT ); Sun, 23 Aug 2020 00:42:32 -0400 Received: from mail-ot1-x344.google.com (mail-ot1-x344.google.com [IPv6:2607:f8b0:4864:20::344]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 626A5C061755 for ; Sat, 22 Aug 2020 21:42:32 -0700 (PDT) Received: by mail-ot1-x344.google.com with SMTP id q9so4723809oth.5 for ; Sat, 22 Aug 2020 21:42:32 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20161025; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=Wq0/Pj1O8yYJggYmNDAaxhok80jCPLOBBgyuI0F4NKU=; b=LdVuAjutBI1rbyg4Ih3B8Fi9nyLIyhBg9X9sHQG5xueevnqimSpmaoID0o4JYq2SYo AVo0qGlMEjLjreSeeI7MYFcYBQgF1opcxV6PbCBm7vn0rIxMPiuV1lnPCMtbGHMk0JbZ V2LVHX2/gZGZikuc0Zjdmz/UwZbXhZeoxYN7ZBxI88e4IrI3JukSo2+qhDCjcVbjoypU PPlDyUMnhBF/Osj+9HIuRgJrDKvKK30MWAjrcrNzokyKcgKQ3nZX95cAHzE7lZr+6Egp ezYEcWp8nUilCaKdO5FSlZdn8E9gSfHr8nBu1bPNOx3auI4jQbLrt25k7A2R1Tigz9ho +/hQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=Wq0/Pj1O8yYJggYmNDAaxhok80jCPLOBBgyuI0F4NKU=; b=dwn7uk/pK348buwT9qEEFviwyW/HigjCG80w2oJt2Soyr7br1TZBe/QM8bHsxO+Xhi Bxb+iMwx6h+IZzQqeTh7PFUPGKUHUT0XA/5yhEvOfCVTawzVPHfyhBjdXLv0MK4KoGBY nVi6joOXn7eR6pq4seiREaD78xWqt/Fz9gSBqgLGlrCJwaVW1/I8ryJrIOMURJxEvDu8 nmXTbdoFMaqzEzmUGp1rGgIR9hN9getDA9+ZWn/AyUElcv9Ya85im9OZaaccWpyLmmhR RqINzjG4ramcWR7MO642KIe4QLASDeL9Xj0tRfTRlV7L0bOpIoCWvZZmSALMJGPd6H/s Bwdg== X-Gm-Message-State: AOAM532wzNdoJY9MHCWr5epSW5yVqTXDDtmoXyJ7guEi3X9LV1QIpzbW T3rp9NsjRYrvgS008qlBIVketZ11E1Q3RZiv X-Google-Smtp-Source: ABdhPJzoNr92d60TK0HdGWXPsuhE8tAfbCpEBY31lM9mcQ33NChSBMz3I4SoFW/gAEbQvT1cBKmcfg== X-Received: by 2002:a05:6830:1519:: with SMTP id k25mr273912otp.208.1598157751410; Sat, 22 Aug 2020 21:42:31 -0700 (PDT) Received: from Arrakis.djogorchock.com ([136.33.205.58]) by smtp.gmail.com with ESMTPSA id z10sm1308572otk.6.2020.08.22.21.42.30 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Sat, 22 Aug 2020 21:42:30 -0700 (PDT) From: "Daniel J. Ogorchock" To: linux-input@vger.kernel.org Cc: thunderbird2k@gmail.com, blaws05@gmail.com, benjamin.tissoires@redhat.com, jikos@kernel.org, Roderick.Colenbrander@sony.com, svv@google.com, s.jegen@gmail.com, carmueller@gmail.com, pgriffais@valvesoftware.com, hadess@hadess.net, "Daniel J. Ogorchock" Subject: [PATCH v12 12/14] HID: nintendo: add support for reading user calibration Date: Sat, 22 Aug 2020 23:41:55 -0500 Message-Id: <20200823044157.339677-13-djogorchock@gmail.com> X-Mailer: git-send-email 2.28.0 In-Reply-To: <20200823044157.339677-1-djogorchock@gmail.com> References: <20200823044157.339677-1-djogorchock@gmail.com> MIME-Version: 1.0 Sender: linux-input-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-input@vger.kernel.org If the controller's SPI flash contains user stick calibration(s), they should be prioritized over the factory calibrations. The user calibrations have 2 magic bytes preceding them. If the bytes are the correct magic values, the user calibration is used. Signed-off-by: Daniel J. Ogorchock --- drivers/hid/hid-nintendo.c | 206 ++++++++++++++++++++++++++----------- 1 file changed, 148 insertions(+), 58 deletions(-) diff --git a/drivers/hid/hid-nintendo.c b/drivers/hid/hid-nintendo.c index afb461d765b1..88a853570faf 100644 --- a/drivers/hid/hid-nintendo.c +++ b/drivers/hid/hid-nintendo.c @@ -23,6 +23,7 @@ */ #include "hid-ids.h" +#include #include #include #include @@ -96,11 +97,23 @@ static const u8 JC_USB_RESET = 0x06; static const u8 JC_USB_PRE_HANDSHAKE = 0x91; static const u8 JC_USB_SEND_UART = 0x92; -/* SPI storage addresses of factory calibration data */ -static const u16 JC_CAL_DATA_START = 0x603d; -static const u16 JC_CAL_DATA_END = 0x604e; -#define JC_CAL_DATA_SIZE (JC_CAL_DATA_END - JC_CAL_DATA_START + 1) +/* Magic value denoting presence of user calibration */ +static const u16 JC_CAL_USR_MAGIC_0 = 0xB2; +static const u16 JC_CAL_USR_MAGIC_1 = 0xA1; +static const u8 JC_CAL_USR_MAGIC_SIZE = 2; + +/* SPI storage addresses of user calibration data */ +static const u16 JC_CAL_USR_LEFT_MAGIC_ADDR = 0x8010; +static const u16 JC_CAL_USR_LEFT_DATA_ADDR = 0x8012; +static const u16 JC_CAL_USR_LEFT_DATA_END = 0x801A; +static const u16 JC_CAL_USR_RIGHT_MAGIC_ADDR = 0x801B; +static const u16 JC_CAL_USR_RIGHT_DATA_ADDR = 0x801D; +#define JC_CAL_STICK_DATA_SIZE \ + (JC_CAL_USR_LEFT_DATA_END - JC_CAL_USR_LEFT_DATA_ADDR + 1) +/* SPI storage addresses of factory calibration data */ +static const u16 JC_CAL_FCT_DATA_LEFT_ADDR = 0x603d; +static const u16 JC_CAL_FCT_DATA_RIGHT_ADDR = 0x6046; /* The raw analog joystick values will be mapped in terms of this magnitude */ static const u16 JC_MAX_STICK_MAG = 32767; @@ -524,38 +537,140 @@ static int joycon_set_player_leds(struct joycon_ctlr *ctlr, u8 flash, u8 on) return joycon_send_subcmd(ctlr, req, 1, HZ/4); } -static const u16 DFLT_STICK_CAL_CEN = 2000; -static const u16 DFLT_STICK_CAL_MAX = 3500; -static const u16 DFLT_STICK_CAL_MIN = 500; -static int joycon_request_calibration(struct joycon_ctlr *ctlr) +static int joycon_request_spi_flash_read(struct joycon_ctlr *ctlr, + u32 start_addr, u8 size, u8 **reply) { struct joycon_subcmd_request *req; - u8 buffer[sizeof(*req) + 5] = { 0 }; struct joycon_input_report *report; - struct joycon_stick_cal *cal_x; - struct joycon_stick_cal *cal_y; + u8 buffer[sizeof(*req) + 5] = { 0 }; + u8 *data; + int ret; + + if (!reply) + return -EINVAL; + + req = (struct joycon_subcmd_request *)buffer; + req->subcmd_id = JC_SUBCMD_SPI_FLASH_READ; + data = req->data; + put_unaligned_le32(start_addr, data); + data[4] = size; + + hid_dbg(ctlr->hdev, "requesting SPI flash data\n"); + ret = joycon_send_subcmd(ctlr, req, 5, HZ); + if (ret) { + hid_err(ctlr->hdev, "failed reading SPI flash; ret=%d\n", ret); + } else { + report = (struct joycon_input_report *)ctlr->input_buf; + /* The read data starts at the 6th byte */ + *reply = &report->reply.data[5]; + } + return ret; +} + +/* + * User calibration's presence is denoted with a magic byte preceding it. + * returns 0 if magic val is present, 1 if not present, < 0 on error + */ +static int joycon_check_for_cal_magic(struct joycon_ctlr *ctlr, u32 flash_addr) +{ + int ret; + u8 *reply; + + ret = joycon_request_spi_flash_read(ctlr, flash_addr, + JC_CAL_USR_MAGIC_SIZE, &reply); + if (ret) + return ret; + + return reply[0] != JC_CAL_USR_MAGIC_0 || reply[1] != JC_CAL_USR_MAGIC_1; +} + +static int joycon_read_stick_calibration(struct joycon_ctlr *ctlr, u16 cal_addr, + struct joycon_stick_cal *cal_x, + struct joycon_stick_cal *cal_y, + bool left_stick) +{ s32 x_max_above; s32 x_min_below; s32 y_max_above; s32 y_min_below; - u8 *data; u8 *raw_cal; int ret; - req = (struct joycon_subcmd_request *)buffer; - req->subcmd_id = JC_SUBCMD_SPI_FLASH_READ; - data = req->data; - data[0] = 0xFF & JC_CAL_DATA_START; - data[1] = 0xFF & (JC_CAL_DATA_START >> 8); - data[2] = 0xFF & (JC_CAL_DATA_START >> 16); - data[3] = 0xFF & (JC_CAL_DATA_START >> 24); - data[4] = JC_CAL_DATA_SIZE; + ret = joycon_request_spi_flash_read(ctlr, cal_addr, + JC_CAL_STICK_DATA_SIZE, &raw_cal); + if (ret) + return ret; + + /* stick calibration parsing: note the order differs based on stick */ + if (left_stick) { + x_max_above = hid_field_extract(ctlr->hdev, (raw_cal + 0), 0, + 12); + y_max_above = hid_field_extract(ctlr->hdev, (raw_cal + 1), 4, + 12); + cal_x->center = hid_field_extract(ctlr->hdev, (raw_cal + 3), 0, + 12); + cal_y->center = hid_field_extract(ctlr->hdev, (raw_cal + 4), 4, + 12); + x_min_below = hid_field_extract(ctlr->hdev, (raw_cal + 6), 0, + 12); + y_min_below = hid_field_extract(ctlr->hdev, (raw_cal + 7), 4, + 12); + } else { + cal_x->center = hid_field_extract(ctlr->hdev, (raw_cal + 0), 0, + 12); + cal_y->center = hid_field_extract(ctlr->hdev, (raw_cal + 1), 4, + 12); + x_min_below = hid_field_extract(ctlr->hdev, (raw_cal + 3), 0, + 12); + y_min_below = hid_field_extract(ctlr->hdev, (raw_cal + 4), 4, + 12); + x_max_above = hid_field_extract(ctlr->hdev, (raw_cal + 6), 0, + 12); + y_max_above = hid_field_extract(ctlr->hdev, (raw_cal + 7), 4, + 12); + } + + cal_x->max = cal_x->center + x_max_above; + cal_x->min = cal_x->center - x_min_below; + cal_y->max = cal_y->center + y_max_above; + cal_y->min = cal_y->center - y_min_below; + + return 0; +} + +static const u16 DFLT_STICK_CAL_CEN = 2000; +static const u16 DFLT_STICK_CAL_MAX = 3500; +static const u16 DFLT_STICK_CAL_MIN = 500; +static int joycon_request_calibration(struct joycon_ctlr *ctlr) +{ + u16 left_stick_addr = JC_CAL_FCT_DATA_LEFT_ADDR; + u16 right_stick_addr = JC_CAL_FCT_DATA_RIGHT_ADDR; + int ret; hid_dbg(ctlr->hdev, "requesting cal data\n"); - ret = joycon_send_subcmd(ctlr, req, 5, HZ); + + /* check if user stick calibrations are present */ + if (!joycon_check_for_cal_magic(ctlr, JC_CAL_USR_LEFT_MAGIC_ADDR)) { + left_stick_addr = JC_CAL_USR_LEFT_DATA_ADDR; + hid_info(ctlr->hdev, "using user cal for left stick\n"); + } else { + hid_info(ctlr->hdev, "using factory cal for left stick\n"); + } + if (!joycon_check_for_cal_magic(ctlr, JC_CAL_USR_RIGHT_MAGIC_ADDR)) { + right_stick_addr = JC_CAL_USR_RIGHT_DATA_ADDR; + hid_info(ctlr->hdev, "using user cal for right stick\n"); + } else { + hid_info(ctlr->hdev, "using factory cal for right stick\n"); + } + + /* read the left stick calibration data */ + ret = joycon_read_stick_calibration(ctlr, left_stick_addr, + &ctlr->left_stick_cal_x, + &ctlr->left_stick_cal_y, + true); if (ret) { hid_warn(ctlr->hdev, - "Failed to read stick cal, using defaults; ret=%d\n", + "Failed to read left stick cal, using dflts; e=%d\n", ret); ctlr->left_stick_cal_x.center = DFLT_STICK_CAL_CEN; @@ -565,6 +680,17 @@ static int joycon_request_calibration(struct joycon_ctlr *ctlr) ctlr->left_stick_cal_y.center = DFLT_STICK_CAL_CEN; ctlr->left_stick_cal_y.max = DFLT_STICK_CAL_MAX; ctlr->left_stick_cal_y.min = DFLT_STICK_CAL_MIN; + } + + /* read the right stick calibration data */ + ret = joycon_read_stick_calibration(ctlr, right_stick_addr, + &ctlr->right_stick_cal_x, + &ctlr->right_stick_cal_y, + false); + if (ret) { + hid_warn(ctlr->hdev, + "Failed to read right stick cal, using dflts; e=%d\n", + ret); ctlr->right_stick_cal_x.center = DFLT_STICK_CAL_CEN; ctlr->right_stick_cal_x.max = DFLT_STICK_CAL_MAX; @@ -573,44 +699,8 @@ static int joycon_request_calibration(struct joycon_ctlr *ctlr) ctlr->right_stick_cal_y.center = DFLT_STICK_CAL_CEN; ctlr->right_stick_cal_y.max = DFLT_STICK_CAL_MAX; ctlr->right_stick_cal_y.min = DFLT_STICK_CAL_MIN; - - return ret; } - report = (struct joycon_input_report *)ctlr->input_buf; - raw_cal = &report->reply.data[5]; - - /* left stick calibration parsing */ - cal_x = &ctlr->left_stick_cal_x; - cal_y = &ctlr->left_stick_cal_y; - - x_max_above = hid_field_extract(ctlr->hdev, (raw_cal + 0), 0, 12); - y_max_above = hid_field_extract(ctlr->hdev, (raw_cal + 1), 4, 12); - cal_x->center = hid_field_extract(ctlr->hdev, (raw_cal + 3), 0, 12); - cal_y->center = hid_field_extract(ctlr->hdev, (raw_cal + 4), 4, 12); - x_min_below = hid_field_extract(ctlr->hdev, (raw_cal + 6), 0, 12); - y_min_below = hid_field_extract(ctlr->hdev, (raw_cal + 7), 4, 12); - cal_x->max = cal_x->center + x_max_above; - cal_x->min = cal_x->center - x_min_below; - cal_y->max = cal_y->center + y_max_above; - cal_y->min = cal_y->center - y_min_below; - - /* right stick calibration parsing */ - raw_cal += 9; - cal_x = &ctlr->right_stick_cal_x; - cal_y = &ctlr->right_stick_cal_y; - - cal_x->center = hid_field_extract(ctlr->hdev, (raw_cal + 0), 0, 12); - cal_y->center = hid_field_extract(ctlr->hdev, (raw_cal + 1), 4, 12); - x_min_below = hid_field_extract(ctlr->hdev, (raw_cal + 3), 0, 12); - y_min_below = hid_field_extract(ctlr->hdev, (raw_cal + 4), 4, 12); - x_max_above = hid_field_extract(ctlr->hdev, (raw_cal + 6), 0, 12); - y_max_above = hid_field_extract(ctlr->hdev, (raw_cal + 7), 4, 12); - cal_x->max = cal_x->center + x_max_above; - cal_x->min = cal_x->center - x_min_below; - cal_y->max = cal_y->center + y_max_above; - cal_y->min = cal_y->center - y_min_below; - hid_dbg(ctlr->hdev, "calibration:\n" "l_x_c=%d l_x_max=%d l_x_min=%d\n" "l_y_c=%d l_y_max=%d l_y_min=%d\n" From patchwork Sun Aug 23 04:41:56 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Daniel Ogorchock X-Patchwork-Id: 11731385 X-Patchwork-Delegate: jikos@jikos.cz Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 3556C913 for ; Sun, 23 Aug 2020 04:42:42 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 1CE9A2074D for ; Sun, 23 Aug 2020 04:42:42 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b="FagKX5TI" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726187AbgHWEml (ORCPT ); Sun, 23 Aug 2020 00:42:41 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:59436 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1725981AbgHWEmd (ORCPT ); Sun, 23 Aug 2020 00:42:33 -0400 Received: from mail-oi1-x244.google.com (mail-oi1-x244.google.com [IPv6:2607:f8b0:4864:20::244]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 4DCEDC0613ED for ; Sat, 22 Aug 2020 21:42:33 -0700 (PDT) Received: by mail-oi1-x244.google.com with SMTP id u24so5307695oic.7 for ; Sat, 22 Aug 2020 21:42:33 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20161025; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=q8wCq0VPpORS1g2FyMDp3PohkW41J2FQiwSKuqgpm94=; b=FagKX5TIDNwTpqvmwXOCrkexLlEaQ69seqlUhIJt6gAexDU4O3K2xLjvjJArkmEOO7 zPdFv5RLKlBl8imZ3aY0i+XKBr3ZFhZuVPZkt4TPR6u6W2KsT+9qkEJdetpjbC6tEQ8c H+k1+GnJOk5RLkajtO48Fu2O/LgRuvgR8RMfZISmFfuqt5iSkY5EmAQyOszYZ/T1T4JD /J4HKsEo9Mr6tFzTU2ZsMDLYY3V8wOj/CIW1w+cw/9zAR5MQJb5QV1rIyivIGF+y2oSE dY2GpbiVz8AZBzq7NiwqF993w8Sv9+AHSjXRH+1+1jea8b3OCfdWSvodZCzWybADReB0 sDng== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=q8wCq0VPpORS1g2FyMDp3PohkW41J2FQiwSKuqgpm94=; b=Cs868ZeMoxTXECQyZyYEe9r9Ip2uTu41Sk2tjVXNZbN/i3dh8dtmJWydhs48lJ5R/g H+niOvJfg7Jl7p19CXjGR7cJbZzeaVZBzCMcBDiwf43dTO3eqBdEp30eWiEdbauxFrMd RC4/q2E+841IpQnlHSu0JkQXK31D/TVK4s+NqIz22ct1g6v9e2Ujsu54/u0xeCFpApXK kttNS84Ii2xfa9aixN7NYsLTu8PZ77DAt+FLnbmhD4J1vi6sNITFcIfv+QT2T30c+q0l D1HtzyRaG3L8E3y5ohH43KZvMfO+q8mCNu4oJtrxYhgvDdJU9ZGjzVbqlvfeziiVltPP RjZQ== X-Gm-Message-State: AOAM5323OQWPMlx3/cShOVmyBzeZSJngQSYrWGxWg95O7xVjtaFTXrKo tmU5XWzT1xY2shXhjfk1pheaJZ+N0wMzUOa2 X-Google-Smtp-Source: ABdhPJyRJ3Phj2r8mg+EcKblAjS4HqbW61G8F/sHE6m4crDVmepQuodd6hEx/UjmImBirQPofB9Ovg== X-Received: by 2002:aca:db0b:: with SMTP id s11mr99825oig.161.1598157752572; Sat, 22 Aug 2020 21:42:32 -0700 (PDT) Received: from Arrakis.djogorchock.com ([136.33.205.58]) by smtp.gmail.com with ESMTPSA id z10sm1308572otk.6.2020.08.22.21.42.31 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Sat, 22 Aug 2020 21:42:31 -0700 (PDT) From: "Daniel J. Ogorchock" To: linux-input@vger.kernel.org Cc: thunderbird2k@gmail.com, blaws05@gmail.com, benjamin.tissoires@redhat.com, jikos@kernel.org, Roderick.Colenbrander@sony.com, svv@google.com, s.jegen@gmail.com, carmueller@gmail.com, pgriffais@valvesoftware.com, hadess@hadess.net, "Daniel J. Ogorchock" Subject: [PATCH v12 13/14] HID: nintendo: prevent needless queueing of the rumble worker Date: Sat, 22 Aug 2020 23:41:56 -0500 Message-Id: <20200823044157.339677-14-djogorchock@gmail.com> X-Mailer: git-send-email 2.28.0 In-Reply-To: <20200823044157.339677-1-djogorchock@gmail.com> References: <20200823044157.339677-1-djogorchock@gmail.com> MIME-Version: 1.0 Sender: linux-input-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-input@vger.kernel.org This patch adds a check for if the rumble queue ringbuffer is empty prior to queuing the rumble workqueue. If the current rumble setting is using a non-zero amplitude though, it will queue the worker anyway. This is because the controller will automatically disable the rumble effect if it isn't "refreshed". This change improves bluetooth communication reliability with the controller, since it reduces the amount of traffic. Signed-off-by: Daniel J. Ogorchock --- drivers/hid/hid-nintendo.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/hid/hid-nintendo.c b/drivers/hid/hid-nintendo.c index 88a853570faf..80f33ab58a5e 100644 --- a/drivers/hid/hid-nintendo.c +++ b/drivers/hid/hid-nintendo.c @@ -378,6 +378,7 @@ struct joycon_ctlr { u16 rumble_lh_freq; u16 rumble_rl_freq; u16 rumble_rh_freq; + bool rumble_zero_amp; }; /* Helper macros for checking controller type */ @@ -777,7 +778,9 @@ static void joycon_parse_report(struct joycon_ctlr *ctlr, spin_lock_irqsave(&ctlr->lock, flags); if (IS_ENABLED(CONFIG_NINTENDO_FF) && rep->vibrator_report && - (msecs - ctlr->rumble_msecs) >= JC_RUMBLE_PERIOD_MS) + (msecs - ctlr->rumble_msecs) >= JC_RUMBLE_PERIOD_MS && + (ctlr->rumble_queue_head != ctlr->rumble_queue_tail || + !ctlr->rumble_zero_amp)) queue_work(ctlr->rumble_queue, &ctlr->rumble_worker); /* Parse the battery status */ @@ -1036,6 +1039,8 @@ static int joycon_set_rumble(struct joycon_ctlr *ctlr, u16 amp_r, u16 amp_l, freq_r_high = ctlr->rumble_rh_freq; freq_l_low = ctlr->rumble_ll_freq; freq_l_high = ctlr->rumble_lh_freq; + /* this flag is used to reduce subcommand traffic */ + ctlr->rumble_zero_amp = (amp_l == 0) && (amp_r == 0); spin_unlock_irqrestore(&ctlr->lock, flags); /* right joy-con */ From patchwork Sun Aug 23 04:41:57 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Daniel Ogorchock X-Patchwork-Id: 11731391 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 38CEA1575 for ; Sun, 23 Aug 2020 04:42:43 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 1665B2074D for ; Sun, 23 Aug 2020 04:42:43 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b="cpEYKAW9" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1725139AbgHWEmm (ORCPT ); Sun, 23 Aug 2020 00:42:42 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:59442 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726600AbgHWEmf (ORCPT ); Sun, 23 Aug 2020 00:42:35 -0400 Received: from mail-ot1-x341.google.com (mail-ot1-x341.google.com [IPv6:2607:f8b0:4864:20::341]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 16D40C061795 for ; Sat, 22 Aug 2020 21:42:35 -0700 (PDT) Received: by mail-ot1-x341.google.com with SMTP id 5so1883991otp.12 for ; Sat, 22 Aug 2020 21:42:35 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20161025; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=6aihM/xwLQRCJ8RmF6gHRnzr6hbA/iv5g/G/Sz8K6U8=; b=cpEYKAW9XJFy10vmNmngh8AAdC3OKVY59ROt/XzF3znpM6U5bWHb24mkcglvrrSh5o zWj00aDZXNYPxCweAj2HzWBgH9y087bh90D5EEDodo05+nJFM9OtAAEwronUMEpL6BML rqlmAr9HeF1PqmdGpYiS2qvC2JtJ6SzjsWD2gqc0QdcURe1dZyPA00v3GyyGmE9yaD+P yhBZ/7My2crSFXNQOgxLDgsX86CABdMAjJSegoJ8mKjP3dSG82HAGR951AAtZ/MmAYXq Eydw62qU+QJ8On8sJFn++OTgRkt430CwesGMcSJeiL6VJR8M2a0QBEY0rJ0nRkBA1jO5 gtzw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=6aihM/xwLQRCJ8RmF6gHRnzr6hbA/iv5g/G/Sz8K6U8=; b=gfXv0w4IynU/VugNHc8B6Xq4cgX2tPciqpA3qqjTVmvQEigYfoKYMu0zcMgAktBarI yZj2nnMK/StXT9lx+1fhP5e0zUZCvC5QmYAUoJuBaSzVnTXc2Ek8F+PW4xQh/SjbvsPT VimDJaxpfZYIfUjrs+TlH57/RoOTc2tt+YQUVH5t35X8Qkbbs2NwIt/WhH8tMN6DLuaB h0g8HnMPYkqm10phHGsPv4Mo0KQdcERCtLC951rf5dl66b7zMa90EOE95dAEJfEsXh6v 7dBq8XA5NBlb/7rpeiy7Wz+8z4Us2YKRJmHIpw/Gqs7OrVIVsJcwNsJTOv96JuL9JsTl xR2Q== X-Gm-Message-State: AOAM530JglLkabJkxN6iEaRnuwgclYoMqBC1ClXJbZSL9FWbAHhTqATc 34FNSdg/Pb2gB+uQcVmuwVA7xFoGLrPqMrE7 X-Google-Smtp-Source: ABdhPJzicCWxJ+FJG+Cz8vVXYtVWWpCFB+XlA9DxN8LEzRHm5X9RJLGdTuYtkQkxjEupe5+sr/z6Lg== X-Received: by 2002:a05:6830:d1:: with SMTP id x17mr263374oto.117.1598157753643; Sat, 22 Aug 2020 21:42:33 -0700 (PDT) Received: from Arrakis.djogorchock.com ([136.33.205.58]) by smtp.gmail.com with ESMTPSA id z10sm1308572otk.6.2020.08.22.21.42.32 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Sat, 22 Aug 2020 21:42:33 -0700 (PDT) From: "Daniel J. Ogorchock" To: linux-input@vger.kernel.org Cc: thunderbird2k@gmail.com, blaws05@gmail.com, benjamin.tissoires@redhat.com, jikos@kernel.org, Roderick.Colenbrander@sony.com, svv@google.com, s.jegen@gmail.com, carmueller@gmail.com, pgriffais@valvesoftware.com, hadess@hadess.net, "Daniel J. Ogorchock" Subject: [PATCH v12 14/14] HID: nintendo: add IMU support Date: Sat, 22 Aug 2020 23:41:57 -0500 Message-Id: <20200823044157.339677-15-djogorchock@gmail.com> X-Mailer: git-send-email 2.28.0 In-Reply-To: <20200823044157.339677-1-djogorchock@gmail.com> References: <20200823044157.339677-1-djogorchock@gmail.com> MIME-Version: 1.0 Sender: linux-input-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-input@vger.kernel.org This patch adds support for the controller's IMU. The accelerometer and gyro data are both provided to userspace using a second input device. The devices can be associated using their uniq value (set to the controller's MAC address). A large part of this patch's functionality was provided by Carl Mueller. The IMU device is blacklisted from the joydev input handler. Signed-off-by: Daniel J. Ogorchock --- drivers/hid/hid-nintendo.c | 503 ++++++++++++++++++++++++++++++++++++- drivers/input/joydev.c | 10 + 2 files changed, 501 insertions(+), 12 deletions(-) diff --git a/drivers/hid/hid-nintendo.c b/drivers/hid/hid-nintendo.c index 80f33ab58a5e..9bbab3bbeaf1 100644 --- a/drivers/hid/hid-nintendo.c +++ b/drivers/hid/hid-nintendo.c @@ -2,7 +2,7 @@ /* * HID driver for Nintendo Switch Joy-Cons and Pro Controllers * - * Copyright (c) 2019 Daniel J. Ogorchock + * Copyright (c) 2019-2020 Daniel J. Ogorchock * * The following resources/projects were referenced for this driver: * https://github.com/dekuNukem/Nintendo_Switch_Reverse_Engineering @@ -26,6 +26,7 @@ #include #include #include +#include #include #include #include @@ -115,6 +116,15 @@ static const u16 JC_CAL_USR_RIGHT_DATA_ADDR = 0x801D; static const u16 JC_CAL_FCT_DATA_LEFT_ADDR = 0x603d; static const u16 JC_CAL_FCT_DATA_RIGHT_ADDR = 0x6046; +/* SPI storage addresses of IMU factory calibration data */ +static const u16 JC_IMU_CAL_FCT_DATA_ADDR = 0x6020; +static const u16 JC_IMU_CAL_FCT_DATA_END = 0x6037; +#define JC_IMU_CAL_DATA_SIZE \ + (JC_IMU_CAL_FCT_DATA_END - JC_IMU_CAL_FCT_DATA_ADDR + 1) +/* SPI storage addresses of IMU user calibration data */ +static const u16 JC_IMU_CAL_USR_MAGIC_ADDR = 0x8026; +static const u16 JC_IMU_CAL_USR_DATA_ADDR = 0x8028; + /* The raw analog joystick values will be mapped in terms of this magnitude */ static const u16 JC_MAX_STICK_MAG = 32767; static const u16 JC_STICK_FUZZ = 250; @@ -125,6 +135,47 @@ static const u16 JC_MAX_DPAD_MAG = 1; static const u16 JC_DPAD_FUZZ /*= 0*/; static const u16 JC_DPAD_FLAT /*= 0*/; +/* Under most circumstances IMU reports are pushed every 15ms; use as default */ +static const u16 JC_IMU_DFLT_AVG_DELTA_MS = 15; +/* How many samples to sum before calculating average IMU report delta */ +static const u16 JC_IMU_SAMPLES_PER_DELTA_AVG = 300; +/* Controls how many dropped IMU packets at once trigger a warning message */ +static const u16 JC_IMU_DROPPED_PKT_WARNING = 3; + +/* + * The controller's accelerometer has a sensor resolution of 16bits and is + * configured with a range of +-8000 milliGs. Therefore, the resolution can be + * calculated thus: (2^16-1)/(8000 * 2) = 4.096 digits per milliG + * Resolution per G (rather than per millliG): 4.096 * 1000 = 4096 digits per G + * Alternatively: 1/4096 = .0002441 Gs per digit + */ +static const s32 JC_IMU_MAX_ACCEL_MAG = 32767; +static const u16 JC_IMU_ACCEL_RES_PER_G = 4096; +static const u16 JC_IMU_ACCEL_FUZZ = 10; +static const u16 JC_IMU_ACCEL_FLAT /*= 0*/; + +/* + * The controller's gyroscope has a sensor resolution of 16bits and is + * configured with a range of +-2000 degrees/second. + * Digits per dps: (2^16 -1)/(2000*2) = 16.38375 + * dps per digit: 16.38375E-1 = .0610 + * + * STMicro recommends in the datasheet to add 15% to the dps/digit. This allows + * the full sensitivity range to be saturated without clipping. This yields more + * accurate results, so it's the technique this driver uses. + * dps per digit (corrected): .0610 * 1.15 = .0702 + * digits per dps (corrected): .0702E-1 = 14.247 + * + * Now, 14.247 truncating to 14 loses a lot of precision, so we rescale the + * min/max range by 1000. + */ +static const s32 JC_IMU_PREC_RANGE_SCALE = 1000; +/* Note: change mag and res_per_dps if prec_range_scale is ever altered */ +static const s32 JC_IMU_MAX_GYRO_MAG = 32767000; /* (2^16-1)*1000 */ +static const u16 JC_IMU_GYRO_RES_PER_DPS = 14247; /* (14.247*1000) */ +static const u16 JC_IMU_GYRO_FUZZ = 10; +static const u16 JC_IMU_GYRO_FLAT /*= 0*/; + /* frequency/amplitude tables for rumble */ struct joycon_rumble_freq_data { u16 high; @@ -259,6 +310,11 @@ struct joycon_stick_cal { s32 center; }; +struct joycon_imu_cal { + s16 offset[3]; + s16 scale[3]; +}; + /* * All the controller's button values are stored in a u32. * They can be accessed with bitwise ANDs. @@ -306,6 +362,15 @@ struct joycon_subcmd_reply { u8 data[0]; /* will be at most 35 bytes */ } __packed; +struct joycon_imu_data { + s16 accel_x; + s16 accel_y; + s16 accel_z; + s16 gyro_x; + s16 gyro_y; + s16 gyro_z; +} __packed; + struct joycon_input_report { u8 id; u8 timer; @@ -315,11 +380,11 @@ struct joycon_input_report { u8 right_stick[3]; u8 vibrator_report; - /* - * If support for firmware updates, gyroscope data, and/or NFC/IR - * are added in the future, this can be swapped for a union. - */ - struct joycon_subcmd_reply reply; + union { + struct joycon_subcmd_reply subcmd_reply; + /* IMU input reports contain 3 samples */ + u8 imu_raw_bytes[sizeof(struct joycon_imu_data) * 3]; + }; } __packed; #define JC_MAX_RESP_SIZE (sizeof(struct joycon_input_report) + 35) @@ -360,6 +425,13 @@ struct joycon_ctlr { struct joycon_stick_cal right_stick_cal_x; struct joycon_stick_cal right_stick_cal_y; + struct joycon_imu_cal accel_cal; + struct joycon_imu_cal gyro_cal; + + /* prevents needlessly recalculating these divisors every sample */ + s32 imu_cal_accel_divisor[3]; + s32 imu_cal_gyro_divisor[3]; + /* power supply data */ struct power_supply *battery; struct power_supply_desc battery_desc; @@ -379,6 +451,16 @@ struct joycon_ctlr { u16 rumble_rl_freq; u16 rumble_rh_freq; bool rumble_zero_amp; + + /* imu */ + struct input_dev *imu_input; + bool imu_first_packet_received; /* helps in initiating timestamp */ + unsigned int imu_timestamp_us; /* timestamp we report to userspace */ + unsigned int imu_last_pkt_ms; /* used to calc imu report delta */ + /* the following are used to track the average imu report time delta */ + unsigned int imu_delta_samples_count; + unsigned int imu_delta_samples_sum; + unsigned int imu_avg_delta_ms; }; /* Helper macros for checking controller type */ @@ -563,7 +645,7 @@ static int joycon_request_spi_flash_read(struct joycon_ctlr *ctlr, } else { report = (struct joycon_input_report *)ctlr->input_buf; /* The read data starts at the 6th byte */ - *reply = &report->reply.data[5]; + *reply = &report->subcmd_reply.data[5]; } return ret; } @@ -723,6 +805,94 @@ static int joycon_request_calibration(struct joycon_ctlr *ctlr) return 0; } +/* + * These divisors are calculated once rather than for each sample. They are only + * dependent on the IMU calibration values. They are used when processing the + * IMU input reports. + */ +static void joycon_calc_imu_cal_divisors(struct joycon_ctlr *ctlr) +{ + int i; + + for (i = 0; i < 3; i++) { + ctlr->imu_cal_accel_divisor[i] = ctlr->accel_cal.scale[i] - + ctlr->accel_cal.offset[i]; + ctlr->imu_cal_gyro_divisor[i] = ctlr->gyro_cal.scale[i] - + ctlr->gyro_cal.offset[i]; + } +} + +static const s16 DFLT_ACCEL_OFFSET /*= 0*/; +static const s16 DFLT_ACCEL_SCALE = 16384; +static const s16 DFLT_GYRO_OFFSET /*= 0*/; +static const s16 DFLT_GYRO_SCALE = 13371; +static int joycon_request_imu_calibration(struct joycon_ctlr *ctlr) +{ + u16 imu_cal_addr = JC_IMU_CAL_FCT_DATA_ADDR; + u8 *raw_cal; + int ret; + int i; + + /* check if user calibration exists */ + if (!joycon_check_for_cal_magic(ctlr, JC_IMU_CAL_USR_MAGIC_ADDR)) { + imu_cal_addr = JC_IMU_CAL_USR_DATA_ADDR; + hid_info(ctlr->hdev, "using user cal for IMU\n"); + } else { + hid_info(ctlr->hdev, "using factory cal for IMU\n"); + } + + /* request IMU calibration data */ + hid_dbg(ctlr->hdev, "requesting IMU cal data\n"); + ret = joycon_request_spi_flash_read(ctlr, imu_cal_addr, + JC_IMU_CAL_DATA_SIZE, &raw_cal); + if (ret) { + hid_warn(ctlr->hdev, + "Failed to read IMU cal, using defaults; ret=%d\n", + ret); + + for (i = 0; i < 3; i++) { + ctlr->accel_cal.offset[i] = DFLT_ACCEL_OFFSET; + ctlr->accel_cal.scale[i] = DFLT_ACCEL_SCALE; + ctlr->gyro_cal.offset[i] = DFLT_GYRO_OFFSET; + ctlr->gyro_cal.scale[i] = DFLT_GYRO_SCALE; + } + joycon_calc_imu_cal_divisors(ctlr); + return ret; + } + + /* IMU calibration parsing */ + for (i = 0; i < 3; i++) { + int j = i * 2; + + ctlr->accel_cal.offset[i] = get_unaligned_le16(raw_cal + j); + ctlr->accel_cal.scale[i] = get_unaligned_le16(raw_cal + j + 6); + ctlr->gyro_cal.offset[i] = get_unaligned_le16(raw_cal + j + 12); + ctlr->gyro_cal.scale[i] = get_unaligned_le16(raw_cal + j + 18); + } + + joycon_calc_imu_cal_divisors(ctlr); + + hid_dbg(ctlr->hdev, "IMU calibration:\n" + "a_o[0]=%d a_o[1]=%d a_o[2]=%d\n" + "a_s[0]=%d a_s[1]=%d a_s[2]=%d\n" + "g_o[0]=%d g_o[1]=%d g_o[2]=%d\n" + "g_s[0]=%d g_s[1]=%d g_s[2]=%d\n", + ctlr->accel_cal.offset[0], + ctlr->accel_cal.offset[1], + ctlr->accel_cal.offset[2], + ctlr->accel_cal.scale[0], + ctlr->accel_cal.scale[1], + ctlr->accel_cal.scale[2], + ctlr->gyro_cal.offset[0], + ctlr->gyro_cal.offset[1], + ctlr->gyro_cal.offset[2], + ctlr->gyro_cal.scale[0], + ctlr->gyro_cal.scale[1], + ctlr->gyro_cal.scale[2]); + + return 0; +} + static int joycon_set_report_mode(struct joycon_ctlr *ctlr) { struct joycon_subcmd_request *req; @@ -749,6 +919,19 @@ static int joycon_enable_rumble(struct joycon_ctlr *ctlr, bool enable) return joycon_send_subcmd(ctlr, req, 1, HZ/4); } +static int joycon_enable_imu(struct joycon_ctlr *ctlr, bool enable) +{ + struct joycon_subcmd_request *req; + u8 buffer[sizeof(*req) + 1] = { 0 }; + + req = (struct joycon_subcmd_request *)buffer; + req->subcmd_id = JC_SUBCMD_ENABLE_IMU; + req->data[0] = enable ? 0x01 : 0x00; + + hid_dbg(ctlr->hdev, "%s IMU\n", enable ? "enabling" : "disabling"); + return joycon_send_subcmd(ctlr, req, 1, HZ); +} + static s32 joycon_map_stick_val(struct joycon_stick_cal *cal, s32 val) { s32 center = cal->center; @@ -767,6 +950,224 @@ static s32 joycon_map_stick_val(struct joycon_stick_cal *cal, s32 val) return new_val; } +static void joycon_input_report_parse_imu_data(struct joycon_ctlr *ctlr, + struct joycon_input_report *rep, + struct joycon_imu_data *imu_data) +{ + u8 *raw = rep->imu_raw_bytes; + int i; + + for (i = 0; i < 3; i++) { + struct joycon_imu_data *data = &imu_data[i]; + + data->accel_x = get_unaligned_le16(raw + 0); + data->accel_y = get_unaligned_le16(raw + 2); + data->accel_z = get_unaligned_le16(raw + 4); + data->gyro_x = get_unaligned_le16(raw + 6); + data->gyro_y = get_unaligned_le16(raw + 8); + data->gyro_z = get_unaligned_le16(raw + 10); + /* point to next imu sample */ + raw += sizeof(struct joycon_imu_data); + } +} + +static void joycon_parse_imu_report(struct joycon_ctlr *ctlr, + struct joycon_input_report *rep) +{ + struct joycon_imu_data imu_data[3] = {0}; /* 3 reports per packet */ + struct input_dev *idev = ctlr->imu_input; + unsigned int msecs = jiffies_to_msecs(jiffies); + unsigned int last_msecs = ctlr->imu_last_pkt_ms; + int i; + int value[6]; + + joycon_input_report_parse_imu_data(ctlr, rep, imu_data); + + /* + * There are complexities surrounding how we determine the timestamps we + * associate with the samples we pass to userspace. The IMU input + * reports do not provide us with a good timestamp. There's a quickly + * incrementing 8-bit counter per input report, but it is not very + * useful for this purpose (it is not entirely clear what rate it + * increments at or if it varies based on packet push rate - more on + * the push rate below...). + * + * The reverse engineering work done on the joy-cons and pro controllers + * by the community seems to indicate the following: + * - The controller samples the IMU every 1.35ms. It then does some of + * its own processing, probably averaging the samples out. + * - Each imu input report contains 3 IMU samples, (usually 5ms apart). + * - In the standard reporting mode (which this driver uses exclusively) + * input reports are pushed from the controller as follows: + * * joy-con (bluetooth): every 15 ms + * * joy-cons (in charging grip via USB): every 15 ms + * * pro controller (USB): every 15 ms + * * pro controller (bluetooth): every 8 ms (this is the wildcard) + * + * Further complicating matters is that some bluetooth stacks are known + * to alter the controller's packet rate by hardcoding the bluetooth + * SSR for the switch controllers (android's stack currently sets the + * SSR to 11ms for both the joy-cons and pro controllers). + * + * In my own testing, I've discovered that my pro controller either + * reports IMU sample batches every 11ms or every 15ms. This rate is + * stable after connecting. It isn't 100% clear what determines this + * rate. Importantly, even when sending every 11ms, none of the samples + * are duplicates. This seems to indicate that the time deltas between + * reported samples can vary based on the input report rate. + * + * The solution employed in this driver is to keep track of the average + * time delta between IMU input reports. In testing, this value has + * proven to be stable, staying at 15ms or 11ms, though other hardware + * configurations and bluetooth stacks could potentially see other rates + * (hopefully this will become more clear as more people use the + * driver). + * + * Keeping track of the average report delta allows us to submit our + * timestamps to userspace based on that. Each report contains 3 + * samples, so the IMU sampling rate should be avg_time_delta/3. We can + * also use this average to detect events where we have dropped a + * packet. The userspace timestamp for the samples will be adjusted + * accordingly to prevent unwanted behvaior. + */ + if (!ctlr->imu_first_packet_received) { + ctlr->imu_timestamp_us = 0; + ctlr->imu_delta_samples_count = 0; + ctlr->imu_delta_samples_sum = 0; + ctlr->imu_avg_delta_ms = JC_IMU_DFLT_AVG_DELTA_MS; + ctlr->imu_first_packet_received = true; + } else { + unsigned int delta = msecs - last_msecs; + unsigned int dropped_pkts; + unsigned int dropped_threshold; + + /* avg imu report delta housekeeping */ + ctlr->imu_delta_samples_sum += delta; + ctlr->imu_delta_samples_count++; + if (ctlr->imu_delta_samples_count >= + JC_IMU_SAMPLES_PER_DELTA_AVG) { + ctlr->imu_avg_delta_ms = ctlr->imu_delta_samples_sum / + ctlr->imu_delta_samples_count; + /* don't ever want divide by zero shenanigans */ + if (ctlr->imu_avg_delta_ms == 0) { + ctlr->imu_avg_delta_ms = 1; + hid_warn(ctlr->hdev, + "calculated avg imu delta of 0\n"); + } + ctlr->imu_delta_samples_count = 0; + ctlr->imu_delta_samples_sum = 0; + } + + /* useful for debugging IMU sample rate */ + hid_dbg(ctlr->hdev, + "imu_report: ms=%u last_ms=%u delta=%u avg_delta=%u\n", + msecs, last_msecs, delta, ctlr->imu_avg_delta_ms); + + /* check if any packets have been dropped */ + dropped_threshold = ctlr->imu_avg_delta_ms * 3 / 2; + dropped_pkts = (delta - min(delta, dropped_threshold)) / + ctlr->imu_avg_delta_ms; + ctlr->imu_timestamp_us += 1000 * ctlr->imu_avg_delta_ms; + if (dropped_pkts > JC_IMU_DROPPED_PKT_WARNING) { + hid_warn(ctlr->hdev, + "compensating for %u dropped IMU reports\n", + dropped_pkts); + hid_warn(ctlr->hdev, + "delta=%u avg_delta=%u\n", + delta, ctlr->imu_avg_delta_ms); + } + } + ctlr->imu_last_pkt_ms = msecs; + + /* Each IMU input report contains three samples */ + for (i = 0; i < 3; i++) { + input_event(idev, EV_MSC, MSC_TIMESTAMP, + ctlr->imu_timestamp_us); + + /* + * These calculations (which use the controller's calibration + * settings to improve the final values) are based on those + * found in the community's reverse-engineering repo (linked at + * top of driver). For hid-nintendo, we make sure that the final + * value given to userspace is always in terms of the axis + * resolution we provided. + * + * Currently only the gyro calculations subtract the calibration + * offsets from the raw value itself. In testing, doing the same + * for the accelerometer raw values decreased accuracy. + * + * Note that the gyro values are multiplied by the + * precision-saving scaling factor to prevent large inaccuracies + * due to truncation of the resolution value which would + * otherwise occur. To prevent overflow (without resorting to 64 + * bit integer math), the mult_frac macro is used. + */ + value[0] = mult_frac((JC_IMU_PREC_RANGE_SCALE * + (imu_data[i].gyro_x - + ctlr->gyro_cal.offset[0])), + ctlr->gyro_cal.scale[0], + ctlr->imu_cal_gyro_divisor[0]); + value[1] = mult_frac((JC_IMU_PREC_RANGE_SCALE * + (imu_data[i].gyro_y - + ctlr->gyro_cal.offset[1])), + ctlr->gyro_cal.scale[1], + ctlr->imu_cal_gyro_divisor[1]); + value[2] = mult_frac((JC_IMU_PREC_RANGE_SCALE * + (imu_data[i].gyro_z - + ctlr->gyro_cal.offset[2])), + ctlr->gyro_cal.scale[2], + ctlr->imu_cal_gyro_divisor[2]); + + value[3] = ((s32)imu_data[i].accel_x * + ctlr->accel_cal.scale[0]) / + ctlr->imu_cal_accel_divisor[0]; + value[4] = ((s32)imu_data[i].accel_y * + ctlr->accel_cal.scale[1]) / + ctlr->imu_cal_accel_divisor[1]; + value[5] = ((s32)imu_data[i].accel_z * + ctlr->accel_cal.scale[2]) / + ctlr->imu_cal_accel_divisor[2]; + + hid_dbg(ctlr->hdev, "raw_gyro: g_x=%hd g_y=%hd g_z=%hd\n", + imu_data[i].gyro_x, imu_data[i].gyro_y, + imu_data[i].gyro_z); + hid_dbg(ctlr->hdev, "raw_accel: a_x=%hd a_y=%hd a_z=%hd\n", + imu_data[i].accel_x, imu_data[i].accel_y, + imu_data[i].accel_z); + + /* + * The right joy-con has 2 axes negated, Y and Z. This is due to + * the orientation of the IMU in the controller. We negate those + * axes' values in order to be consistent with the left joy-con + * and the pro controller: + * X: positive is pointing toward the triggers + * Y: positive is pointing to the left + * Z: positive is pointing up (out of the buttons/sticks) + * The axes follow the right-hand rule. + */ + if (jc_type_is_joycon(ctlr) && jc_type_has_right(ctlr)) { + int j; + + /* negate all but x axis */ + for (j = 1; j < 6; ++j) { + if (j == 3) + continue; + value[j] *= -1; + } + } + + input_report_abs(idev, ABS_RX, value[0]); + input_report_abs(idev, ABS_RY, value[1]); + input_report_abs(idev, ABS_RZ, value[2]); + input_report_abs(idev, ABS_X, value[3]); + input_report_abs(idev, ABS_Y, value[4]); + input_report_abs(idev, ABS_Z, value[5]); + input_sync(idev); + /* convert to micros and divide by 3 (3 samples per report). */ + ctlr->imu_timestamp_us += ctlr->imu_avg_delta_ms * 1000 / 3; + } +} + static void joycon_parse_report(struct joycon_ctlr *ctlr, struct joycon_input_report *rep) { @@ -917,6 +1318,10 @@ static void joycon_parse_report(struct joycon_ctlr *ctlr, spin_unlock_irqrestore(&ctlr->lock, flags); wake_up(&ctlr->wait); } + + /* parse IMU data if present */ + if (rep->id == JC_INPUT_IMU_DATA) + joycon_parse_imu_report(ctlr, rep); } static void joycon_rumble_worker(struct work_struct *work) @@ -1102,6 +1507,7 @@ static int joycon_input_create(struct joycon_ctlr *ctlr) { struct hid_device *hdev; const char *name; + const char *imu_name; int ret; int i; @@ -1110,18 +1516,24 @@ static int joycon_input_create(struct joycon_ctlr *ctlr) switch (hdev->product) { case USB_DEVICE_ID_NINTENDO_PROCON: name = "Nintendo Switch Pro Controller"; + imu_name = "Nintendo Switch Pro Controller IMU"; break; case USB_DEVICE_ID_NINTENDO_CHRGGRIP: - if (jc_type_has_left(ctlr)) + if (jc_type_has_left(ctlr)) { name = "Nintendo Switch Left Joy-Con (Grip)"; - else + imu_name = "Nintendo Switch Left Joy-Con IMU (Grip)"; + } else { name = "Nintendo Switch Right Joy-Con (Grip)"; + imu_name = "Nintendo Switch Right Joy-Con IMU (Grip)"; + } break; case USB_DEVICE_ID_NINTENDO_JOYCONL: name = "Nintendo Switch Left Joy-Con"; + imu_name = "Nintendo Switch Left Joy-Con IMU"; break; case USB_DEVICE_ID_NINTENDO_JOYCONR: name = "Nintendo Switch Right Joy-Con"; + imu_name = "Nintendo Switch Right Joy-Con IMU"; break; default: /* Should be impossible */ hid_err(hdev, "Invalid hid product\n"); @@ -1205,6 +1617,55 @@ static int joycon_input_create(struct joycon_ctlr *ctlr) if (ret) return ret; + /* configure the imu input device */ + ctlr->imu_input = devm_input_allocate_device(&hdev->dev); + if (!ctlr->imu_input) + return -ENOMEM; + + ctlr->imu_input->id.bustype = hdev->bus; + ctlr->imu_input->id.vendor = hdev->vendor; + ctlr->imu_input->id.product = hdev->product; + ctlr->imu_input->id.version = hdev->version; + ctlr->imu_input->uniq = ctlr->mac_addr_str; + ctlr->imu_input->name = imu_name; + input_set_drvdata(ctlr->imu_input, ctlr); + + /* configure imu axes */ + input_set_abs_params(ctlr->imu_input, ABS_X, + -JC_IMU_MAX_ACCEL_MAG, JC_IMU_MAX_ACCEL_MAG, + JC_IMU_ACCEL_FUZZ, JC_IMU_ACCEL_FLAT); + input_set_abs_params(ctlr->imu_input, ABS_Y, + -JC_IMU_MAX_ACCEL_MAG, JC_IMU_MAX_ACCEL_MAG, + JC_IMU_ACCEL_FUZZ, JC_IMU_ACCEL_FLAT); + input_set_abs_params(ctlr->imu_input, ABS_Z, + -JC_IMU_MAX_ACCEL_MAG, JC_IMU_MAX_ACCEL_MAG, + JC_IMU_ACCEL_FUZZ, JC_IMU_ACCEL_FLAT); + input_abs_set_res(ctlr->imu_input, ABS_X, JC_IMU_ACCEL_RES_PER_G); + input_abs_set_res(ctlr->imu_input, ABS_Y, JC_IMU_ACCEL_RES_PER_G); + input_abs_set_res(ctlr->imu_input, ABS_Z, JC_IMU_ACCEL_RES_PER_G); + + input_set_abs_params(ctlr->imu_input, ABS_RX, + -JC_IMU_MAX_GYRO_MAG, JC_IMU_MAX_GYRO_MAG, + JC_IMU_GYRO_FUZZ, JC_IMU_GYRO_FLAT); + input_set_abs_params(ctlr->imu_input, ABS_RY, + -JC_IMU_MAX_GYRO_MAG, JC_IMU_MAX_GYRO_MAG, + JC_IMU_GYRO_FUZZ, JC_IMU_GYRO_FLAT); + input_set_abs_params(ctlr->imu_input, ABS_RZ, + -JC_IMU_MAX_GYRO_MAG, JC_IMU_MAX_GYRO_MAG, + JC_IMU_GYRO_FUZZ, JC_IMU_GYRO_FLAT); + + input_abs_set_res(ctlr->imu_input, ABS_RX, JC_IMU_GYRO_RES_PER_DPS); + input_abs_set_res(ctlr->imu_input, ABS_RY, JC_IMU_GYRO_RES_PER_DPS); + input_abs_set_res(ctlr->imu_input, ABS_RZ, JC_IMU_GYRO_RES_PER_DPS); + + __set_bit(EV_MSC, ctlr->imu_input->evbit); + __set_bit(MSC_TIMESTAMP, ctlr->imu_input->mscbit); + __set_bit(INPUT_PROP_ACCELEROMETER, ctlr->imu_input->propbit); + + ret = input_register_device(ctlr->imu_input); + if (ret) + return ret; + return 0; } @@ -1465,7 +1926,7 @@ static int joycon_read_info(struct joycon_ctlr *ctlr) report = (struct joycon_input_report *)ctlr->input_buf; for (i = 4, j = 0; j < 6; i++, j++) - ctlr->mac_addr[j] = report->reply.data[i]; + ctlr->mac_addr[j] = report->subcmd_reply.data[i]; ctlr->mac_addr_str = devm_kasprintf(&ctlr->hdev->dev, GFP_KERNEL, "%02X:%02X:%02X:%02X:%02X:%02X", @@ -1480,7 +1941,7 @@ static int joycon_read_info(struct joycon_ctlr *ctlr) hid_info(ctlr->hdev, "controller MAC = %s\n", ctlr->mac_addr_str); /* Retrieve the type so we can distinguish for charging grip */ - ctlr->ctlr_type = report->reply.data[2]; + ctlr->ctlr_type = report->subcmd_reply.data[2]; return 0; } @@ -1523,7 +1984,7 @@ static int joycon_ctlr_handle_event(struct joycon_ctlr *ctlr, u8 *data, data[0] != JC_INPUT_SUBCMD_REPLY) break; report = (struct joycon_input_report *)data; - if (report->reply.id == ctlr->subcmd_ack_match) + if (report->subcmd_reply.id == ctlr->subcmd_ack_match) match = true; break; default: @@ -1653,6 +2114,16 @@ static int nintendo_hid_probe(struct hid_device *hdev, hid_warn(hdev, "Analog stick positions may be inaccurate\n"); } + /* get IMU calibration data, and parse it */ + ret = joycon_request_imu_calibration(ctlr); + if (ret) { + /* + * We can function with default calibration, but it may be + * inaccurate. Provide a warning, and continue on. + */ + hid_warn(hdev, "Unable to read IMU calibration data\n"); + } + /* Set the reporting mode to 0x30, which is the full report mode */ ret = joycon_set_report_mode(ctlr); if (ret) { @@ -1667,6 +2138,13 @@ static int nintendo_hid_probe(struct hid_device *hdev, goto err_mutex; } + /* Enable the IMU */ + ret = joycon_enable_imu(ctlr, true); + if (ret) { + hid_err(hdev, "Failed to enable the IMU; ret=%d\n", ret); + goto err_mutex; + } + ret = joycon_read_info(ctlr); if (ret) { hid_err(hdev, "Failed to retrieve controller info; ret=%d\n", @@ -1759,3 +2237,4 @@ module_hid_driver(nintendo_hid_driver); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Daniel J. Ogorchock "); MODULE_DESCRIPTION("Driver for Nintendo Switch Controllers"); + diff --git a/drivers/input/joydev.c b/drivers/input/joydev.c index a2b5fbba2d3b..c5ec22e4a17e 100644 --- a/drivers/input/joydev.c +++ b/drivers/input/joydev.c @@ -756,6 +756,12 @@ static void joydev_cleanup(struct joydev *joydev) #define USB_VENDOR_ID_THQ 0x20d6 #define USB_DEVICE_ID_THQ_PS3_UDRAW 0xcb17 +#define USB_VENDOR_ID_NINTENDO 0x057e +#define USB_DEVICE_ID_NINTENDO_JOYCONL 0x2006 +#define USB_DEVICE_ID_NINTENDO_JOYCONR 0x2007 +#define USB_DEVICE_ID_NINTENDO_PROCON 0x2009 +#define USB_DEVICE_ID_NINTENDO_CHRGGRIP 0x200E + #define ACCEL_DEV(vnd, prd) \ { \ .flags = INPUT_DEVICE_ID_MATCH_VENDOR | \ @@ -787,6 +793,10 @@ static const struct input_device_id joydev_blacklist[] = { ACCEL_DEV(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS4_CONTROLLER_2), ACCEL_DEV(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS4_CONTROLLER_DONGLE), ACCEL_DEV(USB_VENDOR_ID_THQ, USB_DEVICE_ID_THQ_PS3_UDRAW), + ACCEL_DEV(USB_VENDOR_ID_NINTENDO, USB_DEVICE_ID_NINTENDO_PROCON), + ACCEL_DEV(USB_VENDOR_ID_NINTENDO, USB_DEVICE_ID_NINTENDO_CHRGGRIP), + ACCEL_DEV(USB_VENDOR_ID_NINTENDO, USB_DEVICE_ID_NINTENDO_JOYCONL), + ACCEL_DEV(USB_VENDOR_ID_NINTENDO, USB_DEVICE_ID_NINTENDO_JOYCONR), { /* sentinel */ } };