From patchwork Thu Sep 17 23:18:38 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Keith Busch X-Patchwork-Id: 11783711 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 93793618 for ; Thu, 17 Sep 2020 23:18:53 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 7B387208E4 for ; Thu, 17 Sep 2020 23:18:53 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=default; t=1600384733; bh=77Kxgapl7no1WFV+APUmjan4i/QFUqqtiSGZHbU3iiw=; h=From:To:Cc:Subject:Date:In-Reply-To:References:List-ID:From; b=vblnfNgwtkVctwlDrPv1fSekdpcNN36R1Mtc1hF4IZ4ek5X5WDl/NReQWLxorwmhK J6v/VHknVf/Y6LX0OfCcdzUJaI6qUKsV3ogbodMsc+81JPdIr/OD4fTKVS8enVXOaa 1xJQMNouCAwFi6zUhgvPuwW/wHRPSu95v2s9f6uc= Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726121AbgIQXSx (ORCPT ); Thu, 17 Sep 2020 19:18:53 -0400 Received: from mail.kernel.org ([198.145.29.99]:55796 "EHLO mail.kernel.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726101AbgIQXSu (ORCPT ); Thu, 17 Sep 2020 19:18:50 -0400 Received: from dhcp-10-100-145-180.wdl.wdc.com (unknown [199.255.45.60]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPSA id 1AD7F2085B; Thu, 17 Sep 2020 23:18:49 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=default; t=1600384729; bh=77Kxgapl7no1WFV+APUmjan4i/QFUqqtiSGZHbU3iiw=; h=From:To:Cc:Subject:Date:In-Reply-To:References:From; b=xgARRf/p6wEOxHhwhBCLO0XlmncVbS/ukJgatHNihHqKcoibRDz0GhonhhBNAnHPk +JYnn89vlJrTp+rImd9ua3+oCQVVnYsjMeIOLbErV+rNqwr4E5A/ZJ7hLx2WENUGGf GQalqNEQGbSDwM3l6RJ5vfxE/YtjRtruu6UGq9I4= From: Keith Busch To: linux-nvme@lists.infradead.org, sagi@grimberg.me, hch@lst.de, linux-block@vger.kernel.org Cc: axboe@kernel.dk, linux-scsi@vger.kernel.org, martin.petersen@oracle.com, Keith Busch , Damien Le Moal , Johannes Thumshirn Subject: [PATCHv3 1/4] block: add zone specific block statuses Date: Thu, 17 Sep 2020 16:18:38 -0700 Message-Id: <20200917231841.4029747-2-kbusch@kernel.org> X-Mailer: git-send-email 2.24.1 In-Reply-To: <20200917231841.4029747-1-kbusch@kernel.org> References: <20200917231841.4029747-1-kbusch@kernel.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-block@vger.kernel.org A zoned device with limited resources to open or activate zones may return an error when the host exceeds those limits. The same command may be successful if retried later, but the host needs to wait for specific zone states before it should retry. Have the block layer provide an appropriate status for these conditions so applications can distinuguish this error for special handling. Cc: Christoph Hellwig Cc: Damien Le Moal Cc: Johannes Thumshirn Signed-off-by: Keith Busch Reviewed-by: Damien Le Moal Reviewed-by: Johannes Thumshirn --- Documentation/block/queue-sysfs.rst | 8 ++++++++ block/blk-core.c | 4 ++++ include/linux/blk_types.h | 18 ++++++++++++++++++ 3 files changed, 30 insertions(+) diff --git a/Documentation/block/queue-sysfs.rst b/Documentation/block/queue-sysfs.rst index f261a5c84170..2638d3446b79 100644 --- a/Documentation/block/queue-sysfs.rst +++ b/Documentation/block/queue-sysfs.rst @@ -124,6 +124,10 @@ For zoned block devices (zoned attribute indicating "host-managed" or EXPLICIT OPEN, IMPLICIT OPEN or CLOSED, is limited by this value. If this value is 0, there is no limit. +If the host attempts to exceed this limit, the driver should report this error +with BLK_STS_ZONE_ACTIVE_RESOURCE, which user space may see as the EOVERFLOW +errno. + max_open_zones (RO) ------------------- For zoned block devices (zoned attribute indicating "host-managed" or @@ -131,6 +135,10 @@ For zoned block devices (zoned attribute indicating "host-managed" or EXPLICIT OPEN or IMPLICIT OPEN, is limited by this value. If this value is 0, there is no limit. +If the host attempts to exceed this limit, the driver should report this error +with BLK_STS_ZONE_OPEN_RESOURCE, which user space may see as the ETOOMANYREFS +errno. + max_sectors_kb (RW) ------------------- This is the maximum number of kilobytes that the block layer will allow diff --git a/block/blk-core.c b/block/blk-core.c index 10c08ac50697..8bffc7732e37 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -186,6 +186,10 @@ static const struct { /* device mapper special case, should not leak out: */ [BLK_STS_DM_REQUEUE] = { -EREMCHG, "dm internal retry" }, + /* zone device specific errors */ + [BLK_STS_ZONE_OPEN_RESOURCE] = { -ETOOMANYREFS, "open zones exceeded" }, + [BLK_STS_ZONE_ACTIVE_RESOURCE] = { -EOVERFLOW, "active zones exceeded" }, + /* everything else not covered above: */ [BLK_STS_IOERR] = { -EIO, "I/O" }, }; diff --git a/include/linux/blk_types.h b/include/linux/blk_types.h index 4ecf4fed171f..8603fc5f86a3 100644 --- a/include/linux/blk_types.h +++ b/include/linux/blk_types.h @@ -103,6 +103,24 @@ typedef u8 __bitwise blk_status_t; */ #define BLK_STS_ZONE_RESOURCE ((__force blk_status_t)14) +/* + * BLK_STS_ZONE_OPEN_RESOURCE is returned from the driver in the completion + * path if the device returns a status indicating that too many zone resources + * are currently open. The same command should be successful if resubmitted + * after the number of open zones decreases below the device's limits, which is + * reported in the request_queue's max_open_zones. + */ +#define BLK_STS_ZONE_OPEN_RESOURCE ((__force blk_status_t)15) + +/* + * BLK_STS_ZONE_ACTIVE_RESOURCE is returned from the driver in the completion + * path if the device returns a status indicating that too many zone resources + * are currently active. The same command should be successful if resubmitted + * after the number of active zones decreases below the device's limits, which + * is reported in the request_queue's max_active_zones. + */ +#define BLK_STS_ZONE_ACTIVE_RESOURCE ((__force blk_status_t)16) + /** * blk_path_error - returns true if error may be path related * @error: status the request was completed with From patchwork Thu Sep 17 23:18:39 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Keith Busch X-Patchwork-Id: 11783715 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id A0C21746 for ; Thu, 17 Sep 2020 23:18:54 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 7FA24214D8 for ; Thu, 17 Sep 2020 23:18:54 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=default; t=1600384734; bh=jfma3X7pilb5Fg1ZcDsNgNV8kAHXdod6ppTdWMc8RNo=; h=From:To:Cc:Subject:Date:In-Reply-To:References:List-ID:From; b=00b/fwVRYO7hXhX4KaT51rSiq62P7DI8STUj9OygjAwJ5E5O3i8Y33LKDzbsJ4COv KedWD+aq5LzBC7RBIEpWLA5hAjUOfMTeXl61Rc9pLGnKLb7hmWuGTfH7+OGOn1R4yS nshBReet5SkXhNtHsHm+DX4doYw0WQ3biESKQfXE= Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726104AbgIQXSx (ORCPT ); Thu, 17 Sep 2020 19:18:53 -0400 Received: from mail.kernel.org ([198.145.29.99]:55840 "EHLO mail.kernel.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1725886AbgIQXSv (ORCPT ); Thu, 17 Sep 2020 19:18:51 -0400 Received: from dhcp-10-100-145-180.wdl.wdc.com (unknown [199.255.45.60]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPSA id F1AE220870; Thu, 17 Sep 2020 23:18:49 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=default; t=1600384730; bh=jfma3X7pilb5Fg1ZcDsNgNV8kAHXdod6ppTdWMc8RNo=; h=From:To:Cc:Subject:Date:In-Reply-To:References:From; b=Ofz0qOD3l9X33Kcfw7NbvkmdAyr24FL7eNh/2umKkDo7vHaNwKCCu0+iFKD8h2wNN 36u5GrK1w/S4OPQHLsi1N9JHIKO9Pg+tALI2DeGR/KyyAGRpEYQ7yyMd8+5cnDwtfN 16HgroN2pOrrI7GYatIf4qGod2C4B5iTNqEaiskU= From: Keith Busch To: linux-nvme@lists.infradead.org, sagi@grimberg.me, hch@lst.de, linux-block@vger.kernel.org Cc: axboe@kernel.dk, linux-scsi@vger.kernel.org, martin.petersen@oracle.com, Keith Busch , Damien Le Moal , Johannes Thumshirn Subject: [PATCHv3 2/4] nvme: translate zone resource errors Date: Thu, 17 Sep 2020 16:18:39 -0700 Message-Id: <20200917231841.4029747-3-kbusch@kernel.org> X-Mailer: git-send-email 2.24.1 In-Reply-To: <20200917231841.4029747-1-kbusch@kernel.org> References: <20200917231841.4029747-1-kbusch@kernel.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-block@vger.kernel.org Translate zoned resource errors to the appropriate blk_status_t. Cc: Christoph Hellwig Cc: Damien Le Moal Cc: Johannes Thumshirn Signed-off-by: Keith Busch Reviewed-by: Damien Le Moal Reviewed-by: Johannes Thumshirn --- drivers/nvme/host/core.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c index 614cd455836b..a0d26fcbf923 100644 --- a/drivers/nvme/host/core.c +++ b/drivers/nvme/host/core.c @@ -236,6 +236,10 @@ static blk_status_t nvme_error_status(u16 status) return BLK_STS_NEXUS; case NVME_SC_HOST_PATH_ERROR: return BLK_STS_TRANSPORT; + case NVME_SC_ZONE_TOO_MANY_ACTIVE: + return BLK_STS_ZONE_ACTIVE_RESOURCE; + case NVME_SC_ZONE_TOO_MANY_OPEN: + return BLK_STS_ZONE_OPEN_RESOURCE; default: return BLK_STS_IOERR; } From patchwork Thu Sep 17 23:18:40 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Keith Busch X-Patchwork-Id: 11783723 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 63939618 for ; Thu, 17 Sep 2020 23:18:56 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 4A12E208E4 for ; Thu, 17 Sep 2020 23:18:56 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=default; t=1600384736; bh=tKQSOYjSGb/l16cUnGFYsJD8Lfi4s5G8oKpqAWkWXm8=; h=From:To:Cc:Subject:Date:In-Reply-To:References:List-ID:From; b=s6uCl7hMtoYqWjqcChNUF/CRckuH83wnmeB5LQUpTzTxlNXKlS0MMTyn6Vtrv11Wz Ba5hWW1hCTw+YMxKHVypeTmkDT28ytWi5UuBthfWxf9kIlSOxWwsB3yA8RMvQo8A5i oMcNZfC2rpY8elAPA7+huCAvfpQiHoHLuNWG72q0= Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726151AbgIQXSz (ORCPT ); Thu, 17 Sep 2020 19:18:55 -0400 Received: from mail.kernel.org ([198.145.29.99]:55870 "EHLO mail.kernel.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726102AbgIQXSx (ORCPT ); Thu, 17 Sep 2020 19:18:53 -0400 Received: from dhcp-10-100-145-180.wdl.wdc.com (unknown [199.255.45.60]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPSA id D5E1220853; Thu, 17 Sep 2020 23:18:50 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=default; t=1600384731; bh=tKQSOYjSGb/l16cUnGFYsJD8Lfi4s5G8oKpqAWkWXm8=; h=From:To:Cc:Subject:Date:In-Reply-To:References:From; b=H4niwTaR4xAhfQ9M0hNyodkynAdh0cO2ahkI9zVSnnhedO6ldoNKT5mOiUTtBuORz 7D1jxoSAdkHbgU+b1hFcnLyLfLwQzWXHFq9NOJyr+SuGh3SLX5SrTbMfMkgxWYR44W onJVO3rkM1uOmUp/U7qP/nU/ZijcZF2BgFMtZYok= From: Keith Busch To: linux-nvme@lists.infradead.org, sagi@grimberg.me, hch@lst.de, linux-block@vger.kernel.org Cc: axboe@kernel.dk, linux-scsi@vger.kernel.org, martin.petersen@oracle.com, Damien Le Moal Subject: [PATCHv3 3/4] scsi: update additional sense codes list Date: Thu, 17 Sep 2020 16:18:40 -0700 Message-Id: <20200917231841.4029747-4-kbusch@kernel.org> X-Mailer: git-send-email 2.24.1 In-Reply-To: <20200917231841.4029747-1-kbusch@kernel.org> References: <20200917231841.4029747-1-kbusch@kernel.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-block@vger.kernel.org From: Damien Le Moal Add missing Additional Sense Codes listed in http://www.t10.org/lists/asc-num.txt. Signed-off-by: Damien Le Moal --- drivers/scsi/sense_codes.h | 54 +++++++++++++++++++++++++++++++++++++- 1 file changed, 53 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/sense_codes.h b/drivers/scsi/sense_codes.h index 201a536688de..805d4c13d070 100644 --- a/drivers/scsi/sense_codes.h +++ b/drivers/scsi/sense_codes.h @@ -1,7 +1,7 @@ /* SPDX-License-Identifier: GPL-2.0 */ /* * The canonical list of T10 Additional Sense Codes is available at: - * http://www.t10.org/lists/asc-num.txt [most recent: 20141221] + * http://www.t10.org/lists/asc-num.txt [most recent: 20200817] */ SENSE_CODE(0x0000, "No additional sense information") @@ -29,6 +29,7 @@ SENSE_CODE(0x001E, "Conflicting SA creation request") SENSE_CODE(0x001F, "Logical unit transitioning to another power condition") SENSE_CODE(0x0020, "Extended copy information available") SENSE_CODE(0x0021, "Atomic command aborted due to ACA") +SENSE_CODE(0x0022, "Deferred microcode is pending") SENSE_CODE(0x0100, "No index/sector signal") @@ -72,6 +73,9 @@ SENSE_CODE(0x041F, "Logical unit not ready, microcode download required") SENSE_CODE(0x0420, "Logical unit not ready, logical unit reset required") SENSE_CODE(0x0421, "Logical unit not ready, hard reset required") SENSE_CODE(0x0422, "Logical unit not ready, power cycle required") +SENSE_CODE(0x0423, "Logical unit not ready, affiliation required") +SENSE_CODE(0x0424, "Depopulation in progress") +SENSE_CODE(0x0425, "Depopulation restoration in progress") SENSE_CODE(0x0500, "Logical unit does not respond to selection") @@ -104,6 +108,17 @@ SENSE_CODE(0x0B06, "Warning - non-volatile cache now volatile") SENSE_CODE(0x0B07, "Warning - degraded power to non-volatile cache") SENSE_CODE(0x0B08, "Warning - power loss expected") SENSE_CODE(0x0B09, "Warning - device statistics notification active") +SENSE_CODE(0x0B0A, "Warning - high critical temperature limit exceeded") +SENSE_CODE(0x0B0B, "Warning - low critical temperature limit exceeded") +SENSE_CODE(0x0B0C, "Warning - high operating temperature limit exceeded") +SENSE_CODE(0x0B0D, "Warning - low operating temperature limit exceeded") +SENSE_CODE(0x0B0E, "Warning - high critical humidity limit exceeded") +SENSE_CODE(0x0B0F, "Warning - low critical humidity limit exceeded") +SENSE_CODE(0x0B10, "Warning - high operating humidity limit exceeded") +SENSE_CODE(0x0B11, "Warning - low operating humidity limit exceeded") +SENSE_CODE(0x0B12, "Warning - microcode security at risk") +SENSE_CODE(0x0B13, "Warning - microcode digital signature validation failure") +SENSE_CODE(0x0B14, "Warning - physical element status change") SENSE_CODE(0x0C00, "Write error") SENSE_CODE(0x0C01, "Write error - recovered with auto reallocation") @@ -122,6 +137,8 @@ SENSE_CODE(0x0C0D, "Write error - not enough unsolicited data") SENSE_CODE(0x0C0E, "Multiple write errors") SENSE_CODE(0x0C0F, "Defects in error window") SENSE_CODE(0x0C10, "Incomplete multiple atomic write operations") +SENSE_CODE(0x0C11, "Write error - recovery scan needed") +SENSE_CODE(0x0C12, "Write error - insufficient zone resources") SENSE_CODE(0x0D00, "Error detected by third party temporary initiator") SENSE_CODE(0x0D01, "Third party device failure") @@ -242,6 +259,9 @@ SENSE_CODE(0x2009, "Access denied - invalid LU identifier") SENSE_CODE(0x200A, "Access denied - invalid proxy token") SENSE_CODE(0x200B, "Access denied - ACL LUN conflict") SENSE_CODE(0x200C, "Illegal command when not in append-only mode") +SENSE_CODE(0x200D, "Not an administrative logical unit") +SENSE_CODE(0x200E, "Not a subsidiary logical unit") +SENSE_CODE(0x200F, "Not a conglomerate logical unit") SENSE_CODE(0x2100, "Logical block address out of range") SENSE_CODE(0x2101, "Invalid element address") @@ -251,6 +271,8 @@ SENSE_CODE(0x2104, "Unaligned write command") SENSE_CODE(0x2105, "Write boundary violation") SENSE_CODE(0x2106, "Attempt to read invalid data") SENSE_CODE(0x2107, "Read boundary violation") +SENSE_CODE(0x2108, "Misaligned write command") +SENSE_CODE(0x2109, "Attempt to access gap zone") SENSE_CODE(0x2200, "Illegal function (use 20 00, 24 00, or 26 00)") @@ -275,6 +297,7 @@ SENSE_CODE(0x2405, "Security working key frozen") SENSE_CODE(0x2406, "Nonce not unique") SENSE_CODE(0x2407, "Nonce timestamp out of range") SENSE_CODE(0x2408, "Invalid XCDB") +SENSE_CODE(0x2409, "Invalid fast format") SENSE_CODE(0x2500, "Logical unit not supported") @@ -297,6 +320,10 @@ SENSE_CODE(0x260F, "Invalid data-out buffer integrity check value") SENSE_CODE(0x2610, "Data decryption key fail limit reached") SENSE_CODE(0x2611, "Incomplete key-associated data set") SENSE_CODE(0x2612, "Vendor specific key reference not found") +SENSE_CODE(0x2613, "Application tag mode page is invalid") +SENSE_CODE(0x2614, "Tape stream mirroring prevented") +SENSE_CODE(0x2615, "Copy source or copy destination not authorized") +SENSE_CODE(0x2616, "Fast copy not possible") SENSE_CODE(0x2700, "Write protected") SENSE_CODE(0x2701, "Hardware write protected") @@ -342,6 +369,7 @@ SENSE_CODE(0x2A12, "Data encryption parameters changed by vendor specific event" SENSE_CODE(0x2A13, "Data encryption key instance counter has changed") SENSE_CODE(0x2A14, "SA creation capabilities data has changed") SENSE_CODE(0x2A15, "Medium removal prevention preempted") +SENSE_CODE(0x2A16, "Zone reset write pointer recommended") SENSE_CODE(0x2B00, "Copy cannot execute since host cannot disconnect") @@ -360,6 +388,11 @@ SENSE_CODE(0x2C0B, "Not reserved") SENSE_CODE(0x2C0C, "Orwrite generation does not match") SENSE_CODE(0x2C0D, "Reset write pointer not allowed") SENSE_CODE(0x2C0E, "Zone is offline") +SENSE_CODE(0x2C0F, "Stream not open") +SENSE_CODE(0x2C10, "Unwritten data in zone") +SENSE_CODE(0x2C11, "Descriptor format sense data required") +SENSE_CODE(0x2C12, "Zone is inactive") +SENSE_CODE(0x2C13, "Well known logical unit access required") SENSE_CODE(0x2D00, "Overwrite error on update in place") @@ -395,6 +428,8 @@ SENSE_CODE(0x3100, "Medium format corrupted") SENSE_CODE(0x3101, "Format command failed") SENSE_CODE(0x3102, "Zoned formatting failed due to spare linking") SENSE_CODE(0x3103, "Sanitize command failed") +SENSE_CODE(0x3104, "Depopulation failed") +SENSE_CODE(0x3105, "Depopulation restoration failed") SENSE_CODE(0x3200, "No defect spare location available") SENSE_CODE(0x3201, "Defect list update failure") @@ -419,6 +454,7 @@ SENSE_CODE(0x3802, "Esn - power management class event") SENSE_CODE(0x3804, "Esn - media class event") SENSE_CODE(0x3806, "Esn - device busy class event") SENSE_CODE(0x3807, "Thin Provisioning soft threshold reached") +SENSE_CODE(0x3808, "Depopulation interrupted") SENSE_CODE(0x3900, "Saving parameters not supported") @@ -456,6 +492,7 @@ SENSE_CODE(0x3B19, "Element enabled") SENSE_CODE(0x3B1A, "Data transfer device removed") SENSE_CODE(0x3B1B, "Data transfer device inserted") SENSE_CODE(0x3B1C, "Too many logical objects on partition to support operation") +SENSE_CODE(0x3B20, "Element static information changed") SENSE_CODE(0x3D00, "Invalid bits in identify message") @@ -488,6 +525,11 @@ SENSE_CODE(0x3F13, "iSCSI IP address removed") SENSE_CODE(0x3F14, "iSCSI IP address changed") SENSE_CODE(0x3F15, "Inspect referrals sense descriptors") SENSE_CODE(0x3F16, "Microcode has been changed without reset") +SENSE_CODE(0x3F17, "Zone transition to full") +SENSE_CODE(0x3F18, "Bind completed") +SENSE_CODE(0x3F19, "Bind redirected") +SENSE_CODE(0x3F1A, "Subsidiary binding changed") + /* * SENSE_CODE(0x40NN, "Ram failure") * SENSE_CODE(0x40NN, "Diagnostic failure on component nn") @@ -589,6 +631,9 @@ SENSE_CODE(0x550B, "Insufficient power for operation") SENSE_CODE(0x550C, "Insufficient resources to create rod") SENSE_CODE(0x550D, "Insufficient resources to create rod token") SENSE_CODE(0x550E, "Insufficient zone resources") +SENSE_CODE(0x550F, "Insufficient zone resources to complete write") +SENSE_CODE(0x5510, "Maximum number of streams open") +SENSE_CODE(0x5511, "Insufficient resources to bind") SENSE_CODE(0x5700, "Unable to recover table-of-contents") @@ -692,6 +737,7 @@ SENSE_CODE(0x5D69, "Firmware impending failure throughput performance") SENSE_CODE(0x5D6A, "Firmware impending failure seek time performance") SENSE_CODE(0x5D6B, "Firmware impending failure spin-up retry count") SENSE_CODE(0x5D6C, "Firmware impending failure drive calibration retry count") +SENSE_CODE(0x5D73, "Media impending failure endurance limit met") SENSE_CODE(0x5DFF, "Failure prediction threshold exceeded (false)") SENSE_CODE(0x5E00, "Low power condition on") @@ -744,6 +790,8 @@ SENSE_CODE(0x6708, "Assign failure occurred") SENSE_CODE(0x6709, "Multiply assigned logical unit") SENSE_CODE(0x670A, "Set target port groups command failed") SENSE_CODE(0x670B, "ATA device feature not enabled") +SENSE_CODE(0x670C, "Command rejected") +SENSE_CODE(0x670D, "Explicit bind not allowed") SENSE_CODE(0x6800, "Logical unit not configured") SENSE_CODE(0x6801, "Subsidiary logical unit not configured") @@ -772,6 +820,10 @@ SENSE_CODE(0x6F04, "Media region code is mismatched to logical unit region") SENSE_CODE(0x6F05, "Drive region must be permanent/region reset count error") SENSE_CODE(0x6F06, "Insufficient block count for binding nonce recording") SENSE_CODE(0x6F07, "Conflict in binding nonce recording") +SENSE_CODE(0x6F08, "Insufficient permission") +SENSE_CODE(0x6F09, "Invalid drive-host pairing server") +SENSE_CODE(0x6F0A, "Drive-host pairing suspended") + /* * SENSE_CODE(0x70NN, "Decompression exception short algorithm id of nn") */ From patchwork Thu Sep 17 23:18:41 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Keith Busch X-Patchwork-Id: 11783719 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id B172C618 for ; Thu, 17 Sep 2020 23:18:55 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 8FAB22137B for ; Thu, 17 Sep 2020 23:18:55 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=default; t=1600384735; bh=NK+w8QmqYf/nABcVzn9HY5/sKPUjVEcVkvH9cPa0NoA=; h=From:To:Cc:Subject:Date:In-Reply-To:References:List-ID:From; b=ciY1Qk2AB4ViSL6Es3FFvrUgKWZU2zC0z+mP3wCtjnCObHtnfmxyzUz3ijV5agNpt 6EZlyL4Hgb1mokhxF5HECJV9IxaR5SAFK5NGRJg7n6UNQhGY1RhyvVI1JhH/J2Ph/i 1Z4DNuGKFjAf5GrrYHY4Cl6D45rkUUaraWtzh874= Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726101AbgIQXSx (ORCPT ); Thu, 17 Sep 2020 19:18:53 -0400 Received: from mail.kernel.org ([198.145.29.99]:55880 "EHLO mail.kernel.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726117AbgIQXSw (ORCPT ); Thu, 17 Sep 2020 19:18:52 -0400 Received: from dhcp-10-100-145-180.wdl.wdc.com (unknown [199.255.45.60]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPSA id 9BC4D208DB; Thu, 17 Sep 2020 23:18:51 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=default; t=1600384732; bh=NK+w8QmqYf/nABcVzn9HY5/sKPUjVEcVkvH9cPa0NoA=; h=From:To:Cc:Subject:Date:In-Reply-To:References:From; b=iVtxeI5gG8IWEwou6juCMvirC4F1CJz5MyfCOZlYlrwq/8ZUhAuB8Hv3RaWos+O6y 4d8W0hKOyJT5Qa9TdTTbwBonySmPC+2EO3m21pKt+/me/NB2argoB1pPHm2gP9l84e q1xwb+WE99zZ5exwGEpNA1RIbOgmCPSxkWwdH8xo= From: Keith Busch To: linux-nvme@lists.infradead.org, sagi@grimberg.me, hch@lst.de, linux-block@vger.kernel.org Cc: axboe@kernel.dk, linux-scsi@vger.kernel.org, martin.petersen@oracle.com, Damien Le Moal , Johannes Thumshirn Subject: [PATCHv3 4/4] scsi: handle zone resources errors Date: Thu, 17 Sep 2020 16:18:41 -0700 Message-Id: <20200917231841.4029747-5-kbusch@kernel.org> X-Mailer: git-send-email 2.24.1 In-Reply-To: <20200917231841.4029747-1-kbusch@kernel.org> References: <20200917231841.4029747-1-kbusch@kernel.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-block@vger.kernel.org From: Damien Le Moal ZBC or ZAC disks that have a limit on the number of open zones may fail a zone open command or a write to a zone that is not already implicitly or explicitly open if the total number of open zones is already at the maximum allowed. For these operations, instead of returning the generic BLK_STS_IOERR, return BLK_STS_ZONE_OPEN_RESOURCE which is returned as -ETOOMANYREFS to the I/O issuer, allowing the device user to act appropriately on these relatively benign zone resource errors. Cc: Christoph Hellwig Cc: Johannes Thumshirn Signed-off-by: Damien Le Moal Acked-by: Martin K. Petersen --- drivers/scsi/scsi_lib.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index 7affaaf8b98e..c129ac6666da 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -758,6 +758,15 @@ static void scsi_io_completion_action(struct scsi_cmnd *cmd, int result) /* See SSC3rXX or current. */ action = ACTION_FAIL; break; + case DATA_PROTECT: + action = ACTION_FAIL; + if ((sshdr.asc == 0x0C && sshdr.ascq == 0x12) || + (sshdr.asc == 0x55 && + (sshdr.ascq == 0x0E || sshdr.ascq == 0x0F))) { + /* Insufficient zone resources */ + blk_stat = BLK_STS_ZONE_OPEN_RESOURCE; + } + break; default: action = ACTION_FAIL; break;