From patchwork Sun Nov 29 21:54:20 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Linus Walleij X-Patchwork-Id: 11939337 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-18.8 required=3.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_CR_TRAILER, INCLUDES_PATCH,MAILING_LIST_MULTI,SPF_HELO_NONE,SPF_PASS,USER_AGENT_GIT autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id CD6E9C71155 for ; Sun, 29 Nov 2020 21:55:25 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 9936720809 for ; Sun, 29 Nov 2020 21:55:25 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b="A8NUZbje" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1727968AbgK2VzR (ORCPT ); Sun, 29 Nov 2020 16:55:17 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:36030 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1725950AbgK2VzR (ORCPT ); Sun, 29 Nov 2020 16:55:17 -0500 Received: from mail-lf1-x12a.google.com (mail-lf1-x12a.google.com [IPv6:2a00:1450:4864:20::12a]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 0A085C0613CF for ; Sun, 29 Nov 2020 13:54:31 -0800 (PST) Received: by mail-lf1-x12a.google.com with SMTP id u18so17014065lfd.9 for ; Sun, 29 Nov 2020 13:54:30 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:mime-version :content-transfer-encoding; bh=22v+25uLTpzoU6j998AK5X4aT/wXdw1+Ijxp1BLCpE8=; b=A8NUZbjezyMvrsQv/uqg7rzmqp2cVN8OcJVFDHRBvPy2ys5HPVB8vr/QAg/4hBjY9F /l7h0ctiklIIVnMNzgKhHjZoO4DItwuY9tjQBWsURDkfLzoyzw0BWbTuyKnxN+svZGZq iXaY8M5BNPXdb6uoQ0NX8Pf+a5I/TbUpVelpVs7t2tIjl8+v5lfZKigHISQBCnj+Y6HT cIhdSSkODDq+rOqvNQqY28XVNo1pPfFZghIU9ba5V4k+TN3pcqCQtA3FJ5UG+zGy658p 6wu/OHAgRpkUSR6GH+28HZy9mWNlNaj+2dlWeHp2ctLsKb4Dnk2GhlmA8lqY+7jCHmCC xH5w== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:mime-version :content-transfer-encoding; bh=22v+25uLTpzoU6j998AK5X4aT/wXdw1+Ijxp1BLCpE8=; b=nkjtQ7IU6JxmXQ5/7K7RZZKWlDfqUJFj+zilaoULijsuSD7TkPyzDfoQVPfur6oI1H LnV42Jwl+DBaikFZ+hncmKAJYlcz9pKEGKlPZV9XdVi1EvEqeQvLsv+HUXGMB05VqDKJ mdQZ4zgdjq/rQeuI6LrSx/j8F9523lb0RsH/sUdPEnrcQCqb7shq4dmtkD6R2mnQt8gN GLlzYjd2dmGsWcbSeLRXq719PYgp4aXBAJf5/ua4usTNeWRUFmCgFghVMpUx/97BzoOi QVzDgRA8JMYM2lSynMb60/ITz8efeWTGgIskw0+Bf0cs7FAjEC8UZMHNyJ1vMA/l6rz2 yv6w== X-Gm-Message-State: AOAM532lENrqZfwgJkelXZPedBYVlZdCnZrebsWVjawjDnOJ32+JoECt aGQNnGH24mA83Equ3OUfmQ/69A== X-Google-Smtp-Source: ABdhPJzudox51pF9Kzryw57vD8MLgv9T2fSKBN+wQO7xB3e4M6fY/+wCDEuulZhtw7he1t/AwYoJcQ== X-Received: by 2002:a19:8a46:: with SMTP id m67mr7791662lfd.515.1606686869439; Sun, 29 Nov 2020 13:54:29 -0800 (PST) Received: from localhost.bredbandsbolaget (c-92d7225c.014-348-6c756e10.bbcust.telenor.se. [92.34.215.146]) by smtp.gmail.com with ESMTPSA id b18sm2268654ljp.124.2020.11.29.13.54.28 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Sun, 29 Nov 2020 13:54:28 -0800 (PST) From: Linus Walleij To: Jonathan Cameron , linux-iio@vger.kernel.org Cc: Hartmut Knaack , Lars-Peter Clausen , Peter Meerwald-Stadler , Linus Walleij , devicetree@vger.kernel.org, phone-devel@vger.kernel.org Subject: [PATCH 1/2 v4] iio: accel: yamaha-yas530: Add DT bindings Date: Sun, 29 Nov 2020 22:54:20 +0100 Message-Id: <20201129215421.1177990-1-linus.walleij@linaro.org> X-Mailer: git-send-email 2.26.2 MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-iio@vger.kernel.org This adds device tree bindings for the Yamaha YAS530 family of magnetometers/compass sensors. Cc: devicetree@vger.kernel.org Cc: phone-devel@vger.kernel.org Signed-off-by: Linus Walleij Reviewed-by: Rob Herring --- ChangeLog v3->v4: - Rename the bindings and file yas530 after the first introduced component in the family. - Simplify conditional logic using the if: not: YAML constructions. - Use the possibility to set a property to false to just remvove reset GPIOs and interrupts from variants that do not have them. ChangeLog v2->v3: - Restrict to cover the YAS53x variants, it turns out that YAS529 is a very different component from the others so keep that for a separate document when/if needed. - Rename the file and binding yamaha,53x.yaml - Use - if: clauses to restrict some properties. - Fix some spelling mistakes. - Restrict the nodename to be "magnetometer@[0-9a-f]" ChangeLog v1->v2: - Add Yamaha to the vendor list, I was surprised to find they were not yet listed. --- .../iio/magnetometer/yamaha,yas530.yaml | 112 ++++++++++++++++++ .../devicetree/bindings/vendor-prefixes.yaml | 2 + 2 files changed, 114 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/magnetometer/yamaha,yas530.yaml diff --git a/Documentation/devicetree/bindings/iio/magnetometer/yamaha,yas530.yaml b/Documentation/devicetree/bindings/iio/magnetometer/yamaha,yas530.yaml new file mode 100644 index 000000000000..4b0ef1ef5445 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/magnetometer/yamaha,yas530.yaml @@ -0,0 +1,112 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/magnetometer/yamaha,yas530.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Yamaha YAS530 family of magnetometer sensors + +maintainers: + - Linus Walleij + +description: + The Yamaha YAS530 magnetometers is a line of 3-axis magnetometers + first introduced by Yamaha in 2009 with the YAS530. They are successors + of Yamaha's first magnetometer YAS529. Over the years this magnetometer + has been miniaturized and appeared in a number of different variants. + +properties: + $nodename: + pattern: '^magnetometer@[0-9a-f]+$' + + compatible: + items: + - enum: + - yamaha,yas530 + - yamaha,yas532 + - yamaha,yas533 + - yamaha,yas535 + - yamaha,yas536 + - yamaha,yas537 + - yamaha,yas539 + + reg: + maxItems: 1 + + reset-gpios: + maxItems: 1 + description: The YAS530 sensor has a RSTN pin used to reset + the logic inside the sensor. This GPIO line should connect + to that pin and be marked as GPIO_ACTIVE_LOW. + + interrupts: + maxItems: 1 + description: Interrupt for INT pin for interrupt generation. + The polarity, whether the interrupt is active on the rising + or the falling edge, is software-configurable in the hardware. + + vdd-supply: + description: An optional regulator providing core power supply + on the VDD pin, typically 1.8 V or 3.0 V. + + iovdd-supply: + description: An optional regulator providing I/O power supply + for the I2C interface on the IOVDD pin, typically 1.8 V. + + mount-matrix: + description: An optional 3x3 mounting rotation matrix. + +allOf: + - if: + not: + properties: + compatible: + items: + const: yamaha,yas530 + then: + properties: + reset-gpios: false + + - if: + properties: + compatible: + items: + const: yamaha,yas539 + then: + properties: + interrupts: false + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include + #include + i2c-0 { + #address-cells = <1>; + #size-cells = <0>; + + magnetometer@2e { + compatible = "yamaha,yas530"; + reg = <0x2e>; + vdd-supply = <&ldo1_reg>; + iovdd-supply = <&ldo2_reg>; + reset-gpios = <&gpio6 12 GPIO_ACTIVE_LOW>; + interrupts = <&gpio6 13 IRQ_TYPE_EDGE_RISING>; + }; + }; + + i2c-1 { + #address-cells = <1>; + #size-cells = <0>; + + magnetometer@2e { + compatible = "yamaha,yas539"; + reg = <0x2e>; + vdd-supply = <&ldo1_reg>; + }; + }; diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 2735be1a8470..0340674c72bd 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -1210,6 +1210,8 @@ patternProperties: description: Shenzhen Xunlong Software CO.,Limited "^xylon,.*": description: Xylon + "^yamaha,.*": + description: Yamaha Corporation "^ylm,.*": description: Shenzhen Yangliming Electronic Technology Co., Ltd. "^yna,.*": From patchwork Sun Nov 29 21:54:21 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Linus Walleij X-Patchwork-Id: 11939339 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-18.8 required=3.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_CR_TRAILER, INCLUDES_PATCH,MAILING_LIST_MULTI,SPF_HELO_NONE,SPF_PASS,USER_AGENT_GIT autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 1CA82C83011 for ; Sun, 29 Nov 2020 21:55:26 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id BDD922078D for ; Sun, 29 Nov 2020 21:55:25 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b="uaUy6Ltf" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1727991AbgK2VzU (ORCPT ); Sun, 29 Nov 2020 16:55:20 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:36040 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1725950AbgK2VzT (ORCPT ); Sun, 29 Nov 2020 16:55:19 -0500 Received: from mail-lj1-x244.google.com (mail-lj1-x244.google.com [IPv6:2a00:1450:4864:20::244]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id EABF6C0613D4 for ; Sun, 29 Nov 2020 13:54:32 -0800 (PST) Received: by mail-lj1-x244.google.com with SMTP id t22so14125884ljk.0 for ; Sun, 29 Nov 2020 13:54:32 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=XDpmCijM2W3p7fpBGrGo6IbxhtDrNDXfFxvf8ARqJCA=; b=uaUy6LtfoZl8rxfXtSW6QhKtCgvDpYv25yk8S5+c1uPquZrQKp+hqgVcOJzZ61uzoh PNop+6haXiteK0XgNcfHtVbyxL6zs8iz+RzUBcC6MoS8MLbWVPlD5vYmO4vrQYlJLhfb 9GEIfcHCLH4oxe9ZAv5g1gy67Ill6lVDOYnwmHkG1aEp7cSoDwOAPHeuR9WVYKhbjBTm Z9hw73PTBeLURtihHteCM0jShsecGB0caWP90EfXp2LTJ+RquOw5XhiZUTd7nANGwRBR pb/v4fKZUXoKJBNRWgzCvth6vN+QMn1e9Zpervk1f5P+kuA0PEL39KFmRO0JZ1z7OmyW 9byQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=XDpmCijM2W3p7fpBGrGo6IbxhtDrNDXfFxvf8ARqJCA=; b=Cwl/Pg4lCzhJFnU/iEbgWG5hOEN2Kh5RmB3y7cO2qb3A5Js0StJdySoCXwseiqtVL2 O2TnugSJp7u/sJKYVateMGdrcw5i7NPbnn74sRsk22OFsKVpRa0zQKFQLmnJPkfDohKu RgCfuYlgYtwyHF61/kZuPkOw9vI2JR0FiCQJrSGrxIhUjKMRsm717dcSMFeF1F6m8mys u7kZY/sn+Us/8mVFP72trYUGSGsSJ4WUDCZyMlLeT8vF8+vhpaxTRcPs/uem4vhYGkRY bJsAZlmNpx2mkBwpQEH44bxMZgA/GG9uvtS0Nu9ODwlxmT+vM6R8279VbGw+ellU5xLQ f1kQ== X-Gm-Message-State: AOAM531t6XkI9bmGsQ2+vVEBkkNi2WAmBV3KJXH5nVDHAK6wZzwlBNAn y/p49a5aYc7BSJ3+U4c5+iYzCg== X-Google-Smtp-Source: ABdhPJwThi8pSzxmrZZpaVcc0cgmPbnIkgzo1enkz5mZzun+466zvnTVPdtD6iQSbzoqKQzdbMw9Cw== X-Received: by 2002:a2e:8e76:: with SMTP id t22mr8519222ljk.10.1606686871176; Sun, 29 Nov 2020 13:54:31 -0800 (PST) Received: from localhost.bredbandsbolaget (c-92d7225c.014-348-6c756e10.bbcust.telenor.se. [92.34.215.146]) by smtp.gmail.com with ESMTPSA id b18sm2268654ljp.124.2020.11.29.13.54.30 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Sun, 29 Nov 2020 13:54:30 -0800 (PST) From: Linus Walleij To: Jonathan Cameron , linux-iio@vger.kernel.org Cc: Hartmut Knaack , Lars-Peter Clausen , Peter Meerwald-Stadler , Linus Walleij , phone-devel@vger.kernel.org Subject: [PATCH 2/2 v4] iio: magnetometer: Add driver for Yamaha YAS530 Date: Sun, 29 Nov 2020 22:54:21 +0100 Message-Id: <20201129215421.1177990-2-linus.walleij@linaro.org> X-Mailer: git-send-email 2.26.2 In-Reply-To: <20201129215421.1177990-1-linus.walleij@linaro.org> References: <20201129215421.1177990-1-linus.walleij@linaro.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-iio@vger.kernel.org This adds an IIO magnetometer driver for the Yamaha YAS530 family of magnetometer/compass chips YAS530, YAS532 and YAS533. A quick survey of the source code released by different vendors reveal that we have these variants in the family with some deployments listed: * YAS529 MS-3C (2005 Samsung Aries) * YAS530 MS-3E (2011 Samsung Galaxy S Advance) * YAS532 MS-3R (2011 Samsung Galaxy S4) * YAS533 MS-3F (Vivo 1633, 1707, V3, Y21L) * (YAS534 is a magnetic switch) * YAS535 MS-6C * YAS536 MS-3W * YAS537 MS-3T (2015 Samsung Galaxy S6, Note 5) * YAS539 MS-3S (2018 Samsung Galaxy A7 SM-A750FN) The YAS529 is so significantly different from the YAS53x variants that it will require its own driver. The YAS537 and YAS539 have slightly different register sets but have strong similarities so a common driver patching this one will probably be reasonable. The source code for Samsung Galaxy A7's YAS539 is not that significantly different from the YAS530 in the Galaxy S Advance, so I believe we will only need this one driver with quirks to handle all of them. The YAS539 is actively announced on Yamaha's devices site: https://device.yamaha.com/en/lsi/products/e_compass/ This is a driver written from scratch using buffered IIO and runtime PM handling regulators and reset. Cc: phone-devel@vger.kernel.org Signed-off-by: Linus Walleij --- ChangeLog v3->v4: - Renamed the driver and everything related to "yas530" taking the name of the first supported part number. - Use FIELD_GET() to extract bits from longer words where appropriate. This makes it necessary to tag yas5xx_extract_bit() with __always_inline since FIELD_GET() relies on being resolved at compiletime. - Use FIELD_PREP() to conjure the CCK setting. - Extract the calibration parameters using a u64 and the linearization parameters using a u32 where we chop out the bits we need. - Drop the now unused yas5xx_extract_bits() function, as FIELD_GET() does a better job at what we want to do. - Don't mention the YAS529 in the introductory description. It will be handled by a separate driver. - Drop unused includes. - Drop the struct i2c_client * from the state container: we only ever need the struct device *. - Use the define for YAS5XX_MEASURE_DATA_BUSY. - Fix the horrible mutex lock bug in yas5xx_measure() - Fix up various cosmetic style issues so they are hopefully the way Jonathan likes them. - Drop development leftover dummy read of the device ID register. - Drop the ,0 parameter to the i2c_device_id - Rename the IIO device just "yas530" or "yas532" in lowercase. Keep the verbose prints in dmesg so we know what device we found. - Drop surplus newline in the KConfig ChangeLog v1->v3: - This is posted along with the DT bindings which are in v2 so just number everything as v2. --- drivers/iio/magnetometer/Kconfig | 15 + drivers/iio/magnetometer/Makefile | 2 + drivers/iio/magnetometer/yamaha-yas530.c | 1057 ++++++++++++++++++++++ 3 files changed, 1074 insertions(+) create mode 100644 drivers/iio/magnetometer/yamaha-yas530.c diff --git a/drivers/iio/magnetometer/Kconfig b/drivers/iio/magnetometer/Kconfig index 1697a8c03506..5d4ffd66032e 100644 --- a/drivers/iio/magnetometer/Kconfig +++ b/drivers/iio/magnetometer/Kconfig @@ -205,4 +205,19 @@ config SENSORS_RM3100_SPI To compile this driver as a module, choose M here: the module will be called rm3100-spi. +config YAMAHA_YAS530 + tristate "Yamaha YAS530 family of 3-Axis Magnetometers (I2C)" + depends on I2C + select REGMAP_I2C + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + help + Say Y here to add support for the Yamaha YAS530 series of + 3-Axis Magnetometers. Right now YAS530, YAS532 and YAS533 are + fully supported. + + This driver can also be compiled as a module. + To compile this driver as a module, choose M here: the module + will be called yamaha-yas. + endmenu diff --git a/drivers/iio/magnetometer/Makefile b/drivers/iio/magnetometer/Makefile index ba1bc34b82fa..b9f45b7fafc3 100644 --- a/drivers/iio/magnetometer/Makefile +++ b/drivers/iio/magnetometer/Makefile @@ -28,3 +28,5 @@ obj-$(CONFIG_SENSORS_HMC5843_SPI) += hmc5843_spi.o obj-$(CONFIG_SENSORS_RM3100) += rm3100-core.o obj-$(CONFIG_SENSORS_RM3100_I2C) += rm3100-i2c.o obj-$(CONFIG_SENSORS_RM3100_SPI) += rm3100-spi.o + +obj-$(CONFIG_YAMAHA_YAS530) += yamaha-yas530.o diff --git a/drivers/iio/magnetometer/yamaha-yas530.c b/drivers/iio/magnetometer/yamaha-yas530.c new file mode 100644 index 000000000000..8dfa165a767f --- /dev/null +++ b/drivers/iio/magnetometer/yamaha-yas530.c @@ -0,0 +1,1057 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Driver for the Yamaha YAS magnetic sensors, often used in Samsung + * mobile phones. While all are not yet handled because of lacking + * hardware, expand this driver to handle the different variants: + * + * YAS530 MS-3E (2011 Samsung Galaxy S Advance) + * YAS532 MS-3R (2011 Samsung Galaxy S4) + * YAS533 MS-3F (Vivo 1633, 1707, V3, Y21L) + * (YAS534 is a magnetic switch, not handled) + * YAS535 MS-6C + * YAS536 MS-3W + * YAS537 MS-3T (2015 Samsung Galaxy S6, Note 5, Xiaomi) + * YAS539 MS-3S (2018 Samsung Galaxy A7 SM-A750FN) + * + * Code functions found in the MPU3050 YAS530 and YAS532 drivers + * named "inv_compass" in the Tegra Android kernel tree. + * Copyright (C) 2012 InvenSense Corporation + * + * Author: Linus Walleij + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +/* This register map covers YAS530 and YAS532 but differs in YAS 537 and YAS539 */ +#define YAS5XX_DEVICE_ID 0x80 +#define YAS5XX_ACTUATE_INIT_COIL 0x81 +#define YAS5XX_MEASURE 0x82 +#define YAS5XX_CONFIG 0x83 +#define YAS5XX_MEASURE_INTERVAL 0x84 +#define YAS5XX_OFFSET_X 0x85 /* +/-31 */ +#define YAS5XX_OFFSET_Y1 0x86 /* +/-31 */ +#define YAS5XX_OFFSET_Y2 0x87 /* +/-31 */ +#define YAS5XX_TEST1 0x88 +#define YAS5XX_TEST2 0x89 +#define YAS5XX_CAL 0x90 +#define YAS5XX_MEASURE_DATA 0xB0 + +/* Bits in the YAS5xx config register */ +#define YAS5XX_CONFIG_INTON BIT(0) /* Interrupt on? */ +#define YAS5XX_CONFIG_INTHACT BIT(1) /* Interrupt active high? */ +#define YAS5XX_CONFIG_CCK_MASK GENMASK(4, 2) +#define YAS5XX_CONFIG_CCK_SHIFT 2 + +/* Bits in the measure command register */ +#define YAS5XX_MEASURE_START BIT(0) +#define YAS5XX_MEASURE_LDTC BIT(1) +#define YAS5XX_MEASURE_FORS BIT(2) +#define YAS5XX_MEASURE_DLYMES BIT(4) + +/* Bits in the measure data register */ +#define YAS5XX_MEASURE_DATA_BUSY BIT(7) + +#define YAS530_DEVICE_ID 0x01 /* YAS530 (MS-3E) */ +#define YAS530_VERSION_A 0 /* YAS530 (MS-3E A) */ +#define YAS530_VERSION_B 1 /* YAS530B (MS-3E B) */ +#define YAS530_VERSION_A_COEF 380 +#define YAS530_VERSION_B_COEF 550 +#define YAS530_DATA_CENTER 2048 +#define YAS530_DATA_OVERFLOW 4095 + +#define YAS532_DEVICE_ID 0x02 /* YAS532/YAS533 (MS-3R/F) */ +#define YAS532_VERSION_AB 0 /* YAS532/533 AB (MS-3R/F AB) */ +#define YAS532_VERSION_AC 1 /* YAS532/533 AC (MS-3R/F AC) */ +#define YAS532_VERSION_AB_COEF 1800 +#define YAS532_VERSION_AC_COEF_X 850 +#define YAS532_VERSION_AC_COEF_Y1 750 +#define YAS532_VERSION_AC_COEF_Y2 750 +#define YAS532_DATA_CENTER 4096 +#define YAS532_DATA_OVERFLOW 8191 +#define YAS532_20DEGREES 390 /* Looks like Kelvin */ + +/* These variant IDs are known from code dumps */ +#define YAS537_DEVICE_ID 0x07 /* YAS537 (MS-3T) */ +#define YAS539_DEVICE_ID 0x08 /* YAS539 (MS-3S) */ + +/* Turn off device regulators etc after 5 seconds of inactivity */ +#define YAS5XX_AUTOSUSPEND_DELAY 5000 + +struct yas5xx_calibration { + /* Linearization calibration x, y1, y2 */ + s32 r[3]; + u32 f[3]; + /* Temperature compensation calibration */ + s32 Cx, Cy1, Cy2; + /* Misc calibration coefficients */ + s32 a2, a3, a4, a5, a6, a7, a8, a9, k; + /* clock divider */ + u8 dck; +}; + + +/** + * struct yas5xx - state container for the YAS5xx driver + * @dev: parent device pointer + * @devid: device ID number + * @version: device version + * @name: device name + * @calibration: calibration settings from the OTP storage + * @hard_offsets: offsets for each axis measured with initcoil actuated + * @orientation: mounting matrix, flipped axis etc + * @map: regmap to access the YAX5xx registers over I2C + * @regs: the vdd and vddio power regulators + * @reset: GPIO line used for handling RESET + * @lock: locks the magnetometer for exclusive use during a measurement + * so that measurements get serialized in a first-come-first serve manner + * @scan: naturally aligned measurements + */ +struct yas5xx { + struct device *dev; + unsigned int devid; + unsigned int version; + char name[16]; + struct yas5xx_calibration calibration; + u8 hard_offsets[3]; + struct iio_mount_matrix orientation; + struct regmap *map; + struct regulator_bulk_data regs[2]; + struct gpio_desc *reset; + struct mutex lock; + /* + * The scanout is 4 x 32 bits in CPU endianness. + * Ensure timestamp is naturally aligned + */ + struct { + s32 channels[4]; + s64 ts __aligned(8); + } scan; +}; + +/* On YAS530 the x, y1 and y2 values are 12 bits */ +static u16 yas530_extract_axis(u8 *data) +{ + u16 val; + + /* + * These are the bits used in a 16bit word: + * 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 + * x x x x x x x x x x x x + */ + val = get_unaligned_be16(&data[0]); + val = FIELD_GET(GENMASK(14, 3), val); + return val; +} + +/* On YAS532 the x, y1 and y2 values are 13 bits */ +static u16 yas532_extract_axis(u8 *data) +{ + u16 val; + + /* + * These are the bits used in a 16bit word: + * 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 + * x x x x x x x x x x x x x + */ + val = get_unaligned_be16(&data[0]); + val = FIELD_GET(GENMASK(14, 2), val); + return val; +} + +static int yas5xx_busy_wait(struct yas5xx *yas5xx) +{ + int maxloops = 1000; + unsigned int val; + int ret; + + while (maxloops) { + ret = regmap_read(yas5xx->map, YAS5XX_MEASURE_DATA, &val); + if (ret) + return ret; + + if (!(val & YAS5XX_MEASURE_DATA_BUSY)) + return 0; + + maxloops--; + } + + return -ETIMEDOUT; +} + +/** + * yas5xx_measure() - Make a measure from the hardware + * @yas5xx: The device state + * @t: the raw temperature measurement + * @x: the raw x axis measurement + * @y1: the y1 axis measurement + * @y2: the y2 axis measurement + */ +static int yas5xx_measure(struct yas5xx *yas5xx, u16 *t, u16 *x, u16 *y1, u16 *y2) +{ + u8 data[8]; + int ret; + u16 val; + + mutex_lock(&yas5xx->lock); + ret = regmap_write(yas5xx->map, YAS5XX_MEASURE, + YAS5XX_MEASURE_START); + if (ret < 0) + goto out_unlock; + + /* Typical time to measure 1500 us, max 2000 us */ + ret = yas5xx_busy_wait(yas5xx); + if (ret) { + dev_err(yas5xx->dev, "timeout waiting for measurement\n"); + goto out_unlock; + } + + ret = regmap_bulk_read(yas5xx->map, YAS5XX_MEASURE_DATA, + data, sizeof(data)); + if (ret) + goto out_unlock; + + mutex_unlock(&yas5xx->lock); + + switch (yas5xx->devid) { + case YAS530_DEVICE_ID: + /* + * The t value is 9 bits in big endian format + * These are the bits used in a 16bit word: + * 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 + * x x x x x x x x x + */ + val = get_unaligned_be16(&data[0]); + val = FIELD_GET(GENMASK(14, 6), val); + *t = val; + *x = yas530_extract_axis(&data[2]); + *y1 = yas530_extract_axis(&data[4]); + *y2 = yas530_extract_axis(&data[6]); + break; + case YAS532_DEVICE_ID: + /* + * The t value is 10 bits in big endian format + * These are the bits used in a 16bit word: + * 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 + * x x x x x x x x x x + */ + val = get_unaligned_be16(&data[0]); + val = FIELD_GET(GENMASK(14, 5), val); + *t = val; + *x = yas532_extract_axis(&data[2]); + *y1 = yas532_extract_axis(&data[4]); + *y2 = yas532_extract_axis(&data[6]); + break; + default: + dev_err(yas5xx->dev, "unknown data format\n"); + ret = -EINVAL; + break; + } + +out_unlock: + mutex_unlock(&yas5xx->lock); + return ret; +} + +static s32 yas5xx_linearize(struct yas5xx *yas5xx, u16 val, int axis) +{ + struct yas5xx_calibration *c = &yas5xx->calibration; + static const s32 yas532ac_coef[] = { + YAS532_VERSION_AC_COEF_X, + YAS532_VERSION_AC_COEF_Y1, + YAS532_VERSION_AC_COEF_Y2, + }; + s32 coef; + + /* Select coefficients */ + switch (yas5xx->devid) { + case YAS530_DEVICE_ID: + if (yas5xx->version == YAS530_VERSION_A) + coef = YAS530_VERSION_A_COEF; + else + coef = YAS530_VERSION_B_COEF; + break; + case YAS532_DEVICE_ID: + if (yas5xx->version == YAS532_VERSION_AB) + coef = YAS532_VERSION_AB_COEF; + else + /* Elaborate coefficients */ + coef = yas532ac_coef[axis]; + break; + default: + dev_err(yas5xx->dev, "unknown device type\n"); + break; + } + /* + * Linearization formula: + * + * x' = x - (3721 + 50 * f) + (xoffset - r) * c + * + * Where f and r are calibration values, c is a per-device + * and sometimes per-axis coefficient. + */ + return val - (3721 + 50 * c->f[axis]) + + (yas5xx->hard_offsets[axis] - c->r[axis]) * coef; +} + +/** + * yas5xx_get_measure() - Measure a sample of all axis and process + * + * Returned valued are in nanotesla according to some code. + */ +static int yas5xx_get_measure(struct yas5xx *yas5xx, s32 *to, s32 *xo, s32 *yo, s32 *zo) +{ + struct yas5xx_calibration *c = &yas5xx->calibration; + u16 t, x, y1, y2; + /* These are "signed x, signed y1 etc */ + s32 sx, sy1, sy2, sy, sz; + int ret; + + /* We first get raw data that needs to be translated to [x,y,z] */ + ret = yas5xx_measure(yas5xx, &t, &x, &y1, &y2); + if (ret) + return ret; + + /* Do some linearization if available */ + sx = yas5xx_linearize(yas5xx, x, 0); + sy1 = yas5xx_linearize(yas5xx, y1, 1); + sy2 = yas5xx_linearize(yas5xx, y2, 2); + + /* + * Temperature compensation for x, y1, y2 respectively: + * + * Cx * t + * x' = x - ------ + * 100 + */ + sx = sx - (c->Cx * t) / 100; + sy1 = sy1 - (c->Cy1 * t) / 100; + sy2 = sy2 - (c->Cy2 * t) / 100; + + /* + * Break y1 and y2 into y and z, y1 and y2 are apparently encoding + * y and z. + */ + sy = sy1 - sy2; + sz = -sy1 - sy2; + + /* + * FIXME: convert to Celsius? Just guessing this is given + * as 1/10:s of degrees so multiply by 100 to get millicentigrades. + */ + *to = t * 100; + /* + * Calibrate [x,y,z] with some formulas like this: + * + * 100 * x + a_2 * y + a_3 * z + * x' = k * --------------------------- + * 10 + * + * a_4 * x + a_5 * y + a_6 * z + * y' = k * --------------------------- + * 10 + * + * a_7 * x + a_8 * y + a_9 * z + * z' = k * --------------------------- + * 10 + */ + *xo = c->k * ((100 * sx + c->a2 * sy + c->a3 * sz) / 10); + *yo = c->k * ((c->a4 * sx + c->a5 * sy + c->a6 * sz) / 10); + *zo = c->k * ((c->a7 * sx + c->a8 * sy + c->a9 * sz) / 10); + + return 0; +} + +static int yas5xx_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, + long mask) +{ + struct yas5xx *yas5xx = iio_priv(indio_dev); + s32 t, x, y, z; + int ret; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + pm_runtime_get_sync(yas5xx->dev); + ret = yas5xx_get_measure(yas5xx, &t, &x, &y, &z); + pm_runtime_mark_last_busy(yas5xx->dev); + pm_runtime_put_autosuspend(yas5xx->dev); + if (ret) + return ret; + switch (chan->address) { + case 0: + *val = t; + break; + case 1: + *val = x; + break; + case 2: + *val = y; + break; + case 3: + *val = z; + break; + default: + dev_err(yas5xx->dev, "unknown channel\n"); + return -EINVAL; + } + return IIO_VAL_INT; + case IIO_CHAN_INFO_SCALE: + if (chan->address == 0) { + /* Temperature is unscaled */ + *val = 1; + return IIO_VAL_INT; + } + /* + * The axis values are in nanotesla according to the vendor + * drivers, but is clearly in microtesla according to + * experiments. Since 1 uT = 0.01 Gauss, we need to divide + * by 100000000 (10^8) to get to Gauss from the raw value. + */ + *val = 1; + *val2 = 100000000; + return IIO_VAL_FRACTIONAL; + default: + /* Unknown request */ + return -EINVAL; + } + + return -EINVAL; +} + +static void yas5xx_fill_buffer(struct iio_dev *indio_dev) +{ + struct yas5xx *yas5xx = iio_priv(indio_dev); + s32 t, x, y, z; + int ret; + + pm_runtime_get_sync(yas5xx->dev); + ret = yas5xx_get_measure(yas5xx, &t, &x, &y, &z); + pm_runtime_mark_last_busy(yas5xx->dev); + pm_runtime_put_autosuspend(yas5xx->dev); + if (ret) { + dev_err(yas5xx->dev, "error refilling buffer\n"); + return; + } + yas5xx->scan.channels[0] = t; + yas5xx->scan.channels[1] = x; + yas5xx->scan.channels[2] = y; + yas5xx->scan.channels[3] = z; + iio_push_to_buffers_with_timestamp(indio_dev, &yas5xx->scan, + iio_get_time_ns(indio_dev)); +} + +static irqreturn_t yas5xx_handle_trigger(int irq, void *p) +{ + const struct iio_poll_func *pf = p; + struct iio_dev *indio_dev = pf->indio_dev; + + yas5xx_fill_buffer(indio_dev); + iio_trigger_notify_done(indio_dev->trig); + + return IRQ_HANDLED; +} + + +static const struct iio_mount_matrix * +yas5xx_get_mount_matrix(const struct iio_dev *indio_dev, + const struct iio_chan_spec *chan) +{ + struct yas5xx *yas5xx = iio_priv(indio_dev); + + return &yas5xx->orientation; +} + +static const struct iio_chan_spec_ext_info yas5xx_ext_info[] = { + IIO_MOUNT_MATRIX(IIO_SHARED_BY_DIR, yas5xx_get_mount_matrix), + { }, +}; + +#define YAS5XX_AXIS_CHANNEL(axis, index) \ + { \ + .type = IIO_MAGN, \ + .modified = 1, \ + .channel2 = IIO_MOD_##axis, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ + BIT(IIO_CHAN_INFO_SCALE), \ + .ext_info = yas5xx_ext_info, \ + .address = index, \ + .scan_index = index, \ + .scan_type = { \ + .sign = 's', \ + .realbits = 32, \ + .storagebits = 32, \ + .endianness = IIO_CPU \ + }, \ + } + +static const struct iio_chan_spec yas5xx_channels[] = { + { + .type = IIO_TEMP, + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), + .address = 0, + .scan_index = 0, + .scan_type = { + .sign = 'u', + .realbits = 32, + .storagebits = 32, + .endianness = IIO_CPU + }, + }, + YAS5XX_AXIS_CHANNEL(X, 1), + YAS5XX_AXIS_CHANNEL(Y, 2), + YAS5XX_AXIS_CHANNEL(Z, 3), + IIO_CHAN_SOFT_TIMESTAMP(4), +}; + +static const unsigned long yas5xx_scan_masks[] = { 0xf, 0 }; + +static const struct iio_info yas5xx_info = { + .read_raw = &yas5xx_read_raw, +}; + +static bool yas5xx_volatile_reg(struct device *dev, unsigned int reg) +{ + return reg == YAS5XX_ACTUATE_INIT_COIL || + reg == YAS5XX_MEASURE || + (reg >= YAS5XX_MEASURE_DATA && + reg <= YAS5XX_MEASURE_DATA + 8); +} + +/* FIXME: enable regmap cache, using mark dirty and sync at runtime resume */ +static const struct regmap_config yas5xx_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .max_register = 0xff, + .volatile_reg = yas5xx_volatile_reg, +}; + +/** + * yas53x_extract_calibration() - extracts the a2-a9 and k calibration + * @data: the bitfield to use + * @c: the calibration to populate + */ +static void yas53x_extract_calibration(u8 *data, struct yas5xx_calibration *c) +{ + u64 val = get_unaligned_be64(data); + + /* + * Bitfield layout for the axis calibration data, for factor + * a2 = 2 etc, k = k, c = clock divider + * + * n 7 6 5 4 3 2 1 0 + * 0 [ 2 2 2 2 2 2 3 3 ] bits 63 .. 56 + * 1 [ 3 3 4 4 4 4 4 4 ] bits 55 .. 48 + * 2 [ 5 5 5 5 5 5 6 6 ] bits 47 .. 40 + * 3 [ 6 6 6 6 7 7 7 7 ] bits 39 .. 32 + * 4 [ 7 7 7 8 8 8 8 8 ] bits 31 .. 24 + * 5 [ 8 9 9 9 9 9 9 9 ] bits 23 .. 16 + * 6 [ 9 k k k k k c c ] bits 15 .. 8 + * 7 [ c x x x x x x x ] bits 7 .. 0 + */ + c->a2 = FIELD_GET(GENMASK_ULL(63, 58), val) - 32; + c->a3 = FIELD_GET(GENMASK_ULL(57, 54), val) - 8; + c->a4 = FIELD_GET(GENMASK_ULL(53, 48), val) - 32; + c->a5 = FIELD_GET(GENMASK_ULL(47, 42), val) + 38; + c->a6 = FIELD_GET(GENMASK_ULL(41, 36), val) - 32; + c->a7 = FIELD_GET(GENMASK_ULL(35, 29), val) - 64; + c->a8 = FIELD_GET(GENMASK_ULL(28, 23), val) - 32; + c->a9 = FIELD_GET(GENMASK_ULL(22, 15), val); + c->k = FIELD_GET(GENMASK_ULL(14, 10), val) + 10; + c->dck = FIELD_GET(GENMASK_ULL(9, 7), val); +} + +static int yas530_get_calibration_data(struct yas5xx *yas5xx) +{ + struct yas5xx_calibration *c = &yas5xx->calibration; + u8 data[16]; + u32 val; + int ret; + + /* Dummy read, first read is ALWAYS wrong */ + ret = regmap_bulk_read(yas5xx->map, YAS5XX_CAL, data, sizeof(data)); + if (ret) + return ret; + + /* Actual calibration readout */ + ret = regmap_bulk_read(yas5xx->map, YAS5XX_CAL, data, sizeof(data)); + if (ret) + return ret; + dev_dbg(yas5xx->dev, "calibration data: %*ph\n", 14, data); + + add_device_randomness(data, sizeof(data)); + yas5xx->version = data[15] & 0x03; + + /* Extract the calibration from the bitfield */ + c->Cx = data[0] * 6 - 768; + c->Cy1 = data[1] * 6 - 768; + c->Cy2 = data[2] * 6 - 768; + yas53x_extract_calibration(&data[3], c); + + /* + * Extract linearization: + * Linearization layout in the 32 bits at byte 11: + * The r factors are 6 bit values where bit 5 is the sign + * + * n 7 6 5 4 3 2 1 0 + * 0 [ xx xx xx r0 r0 r0 r0 r0 ] bits 31 .. 24 + * 1 [ r0 f0 f0 r1 r1 r1 r1 r1 ] bits 23 .. 16 + * 2 [ r1 f1 f1 r2 r2 r2 r2 r2 ] bits 15 .. 8 + * 3 [ r2 f2 f2 xx xx xx xx xx ] bits 7 .. 0 + */ + val = get_unaligned_be32(&data[11]); + c->f[0] = FIELD_GET(GENMASK(22, 21), val); + c->f[1] = FIELD_GET(GENMASK(14, 13), val); + c->f[2] = FIELD_GET(GENMASK(6, 5), val); + c->r[0] = sign_extend32(FIELD_GET(GENMASK(28, 23), val), 5); + c->r[1] = sign_extend32(FIELD_GET(GENMASK(20, 15), val), 5); + c->r[2] = sign_extend32(FIELD_GET(GENMASK(12, 7), val), 5); + return 0; +} + +static int yas532_get_calibration_data(struct yas5xx *yas5xx) +{ + struct yas5xx_calibration *c = &yas5xx->calibration; + u8 data[14]; + u32 val; + int ret; + int i; + + /* Dummy read, first read is ALWAYS wrong */ + ret = regmap_bulk_read(yas5xx->map, YAS5XX_CAL, + data, sizeof(data)); + if (ret) + return ret; + /* Actual calibration readout */ + ret = regmap_bulk_read(yas5xx->map, YAS5XX_CAL, + data, sizeof(data)); + if (ret) + return ret; + dev_dbg(yas5xx->dev, "calibration data: %*ph\n", 14, data); + + /* Sanity check */ + for (i = 0; i < 13; i++) { + if (data[i] != 0) + break; + } + if (i == 13 && !(data[13] & BIT(7))) + dev_err(yas5xx->dev, "calibration is blank!\n"); + + add_device_randomness(data, sizeof(data)); + /* Only one bit of version info reserved here as far as we know */ + yas5xx->version = data[13] & 0x01; + + /* Extract calibration from the bitfield */ + c->Cx = data[0] * 10 - 1280; + c->Cy1 = data[1] * 10 - 1280; + c->Cy2 = data[2] * 10 - 1280; + yas53x_extract_calibration(&data[3], c); + /* + * Extract linearization: + * Linearization layout in the 32 bits at byte 10: + * The r factors are 6 bit values where bit 5 is the sign + * + * n 7 6 5 4 3 2 1 0 + * 0 [ xx r0 r0 r0 r0 r0 r0 f0 ] bits 31 .. 24 + * 1 [ f0 r1 r1 r1 r1 r1 r1 f1 ] bits 23 .. 16 + * 2 [ f1 r2 r2 r2 r2 r2 r2 f2 ] bits 15 .. 8 + * 3 [ f2 xx xx xx xx xx xx xx ] bits 7 .. 0 + */ + val = get_unaligned_be32(&data[10]); + c->f[0] = FIELD_GET(GENMASK(24, 23), val); + c->f[1] = FIELD_GET(GENMASK(16, 15), val); + c->f[2] = FIELD_GET(GENMASK(8, 7), val); + c->r[0] = sign_extend32(FIELD_GET(GENMASK(30, 25), val), 5); + c->r[1] = sign_extend32(FIELD_GET(GENMASK(22, 17), val), 5); + c->r[2] = sign_extend32(FIELD_GET(GENMASK(14, 7), val), 5); + + return 0; +} + +void yas5xx_dump_calibration(struct yas5xx *yas5xx) +{ + struct yas5xx_calibration *c = &yas5xx->calibration; + + dev_dbg(yas5xx->dev, "f[] = [%d, %d, %d]\n", + c->f[0], c->f[1], c->f[2]); + dev_dbg(yas5xx->dev, "r[] = [%d, %d, %d]\n", + c->r[0], c->r[1], c->r[2]); + dev_dbg(yas5xx->dev, "Cx = %d\n", c->Cx); + dev_dbg(yas5xx->dev, "Cy1 = %d\n", c->Cy1); + dev_dbg(yas5xx->dev, "Cy2 = %d\n", c->Cy2); + dev_dbg(yas5xx->dev, "a2 = %d\n", c->a2); + dev_dbg(yas5xx->dev, "a3 = %d\n", c->a3); + dev_dbg(yas5xx->dev, "a4 = %d\n", c->a4); + dev_dbg(yas5xx->dev, "a5 = %d\n", c->a5); + dev_dbg(yas5xx->dev, "a6 = %d\n", c->a6); + dev_dbg(yas5xx->dev, "a7 = %d\n", c->a7); + dev_dbg(yas5xx->dev, "a8 = %d\n", c->a8); + dev_dbg(yas5xx->dev, "a9 = %d\n", c->a9); + dev_dbg(yas5xx->dev, "k = %d\n", c->k); + dev_dbg(yas5xx->dev, "dck = %d\n", c->dck); +} + +static int yas5xx_set_offsets(struct yas5xx *yas5xx, s8 ox, s8 oy1, s8 oy2) +{ + int ret; + + ret = regmap_write(yas5xx->map, YAS5XX_OFFSET_X, ox); + if (ret) + return ret; + ret = regmap_write(yas5xx->map, YAS5XX_OFFSET_Y1, oy1); + if (ret) + return ret; + return regmap_write(yas5xx->map, YAS5XX_OFFSET_Y2, oy2); +} + +static s8 yas5xx_adjust_offset(s8 old, int bit, u16 center, u16 measure) +{ + if (measure > center) + return old + BIT(bit); + if (measure < center) + return old - BIT(bit); + return old; +} + +static int yas5xx_meaure_offsets(struct yas5xx *yas5xx) +{ + int ret; + u16 center; + u16 t, x, y1, y2; + s8 ox, oy1, oy2; + int i; + + /* Actuate the init coil and measure offsets */ + ret = regmap_write(yas5xx->map, YAS5XX_ACTUATE_INIT_COIL, 0); + if (ret) + return ret; + + /* When the initcoil is active this should be around the center */ + switch (yas5xx->devid) { + case YAS530_DEVICE_ID: + center = YAS530_DATA_CENTER; + break; + case YAS532_DEVICE_ID: + center = YAS532_DATA_CENTER; + break; + default: + dev_err(yas5xx->dev, "unknown device type\n"); + return -EINVAL; + } + + /* + * We set offsets in the interval +-31 by iterating + * +-16, +-8, +-4, +-2, +-1 adjusting the offsets each + * time, then writing the final offsets into the + * registers. + * + * NOTE: these offsets are NOT in the same unit or magnitude + * as the values for [x, y1, y2]. The value is +/-31 + * but the effect on the raw values is much larger. + * The effect of the offset is to bring the measure + * rougly to the center. + */ + ox = 0; + oy1 = 0; + oy2 = 0; + + for (i = 4; i >= 0; i--) { + ret = yas5xx_set_offsets(yas5xx, ox, oy1, oy2); + if (ret) + return ret; + + ret = yas5xx_measure(yas5xx, &t, &x, &y1, &y2); + if (ret) + return ret; + dev_dbg(yas5xx->dev, "measurement %d: x=%d, y1=%d, y2=%d\n", + 5-i, x, y1, y2); + + ox = yas5xx_adjust_offset(ox, i, center, x); + oy1 = yas5xx_adjust_offset(oy1, i, center, y1); + oy2 = yas5xx_adjust_offset(oy2, i, center, y2); + } + + /* Needed for calibration algorithm */ + yas5xx->hard_offsets[0] = ox; + yas5xx->hard_offsets[1] = oy1; + yas5xx->hard_offsets[2] = oy2; + ret = yas5xx_set_offsets(yas5xx, ox, oy1, oy2); + if (ret) + return ret; + + dev_info(yas5xx->dev, "discovered hard offsets: x=%d, y1=%d, y2=%d\n", + ox, oy1, oy2); + return 0; +} + +static int yas5xx_power_on(struct yas5xx *yas5xx) +{ + unsigned int val; + int ret; + + /* Zero the test registers */ + ret = regmap_write(yas5xx->map, YAS5XX_TEST1, 0); + if (ret) + return ret; + ret = regmap_write(yas5xx->map, YAS5XX_TEST2, 0); + if (ret) + return ret; + + /* Set up for no interrupts, calibrated clock divider */ + val = FIELD_PREP(YAS5XX_CONFIG_CCK_MASK, yas5xx->calibration.dck); + ret = regmap_write(yas5xx->map, YAS5XX_CONFIG, val); + if (ret) + return ret; + + /* Measure interval 0 (back-to-back?) */ + return regmap_write(yas5xx->map, YAS5XX_MEASURE_INTERVAL, 0); +} + +static int yas5xx_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct iio_dev *indio_dev; + struct device *dev = &i2c->dev; + struct yas5xx *yas5xx; + int ret; + + indio_dev = devm_iio_device_alloc(dev, sizeof(*yas5xx)); + if (indio_dev == NULL) + return -ENOMEM; + + yas5xx = iio_priv(indio_dev); + i2c_set_clientdata(i2c, indio_dev); + yas5xx->dev = dev; + mutex_init(&yas5xx->lock); + + ret = iio_read_mount_matrix(dev, "mount-matrix", &yas5xx->orientation); + if (ret) + return ret; + + yas5xx->regs[0].supply = "vdd"; + yas5xx->regs[1].supply = "iovdd"; + ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(yas5xx->regs), + yas5xx->regs); + if (ret) + return dev_err_probe(dev, ret, "cannot get regulators\n"); + + ret = regulator_bulk_enable(ARRAY_SIZE(yas5xx->regs), yas5xx->regs); + if (ret) { + dev_err(dev, "cannot enable regulators\n"); + return ret; + } + + /* See comment in runtime resume callback */ + usleep_range(31000, 40000); + + /* This will take the device out of reset if need be */ + yas5xx->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); + if (IS_ERR(yas5xx->reset)) { + ret = dev_err_probe(dev, PTR_ERR(yas5xx->reset), + "failed to get reset line\n"); + goto reg_off; + } + + yas5xx->map = devm_regmap_init_i2c(i2c, &yas5xx_regmap_config); + if (IS_ERR(yas5xx->map)) { + dev_err(dev, "failed to allocate register map\n"); + ret = PTR_ERR(yas5xx->map); + goto reg_off; + } + + ret = regmap_read(yas5xx->map, YAS5XX_DEVICE_ID, &yas5xx->devid); + if (ret) + goto reg_off; + + switch (yas5xx->devid) { + case YAS530_DEVICE_ID: + ret = yas530_get_calibration_data(yas5xx); + if (ret) + goto reg_off; + dev_info(dev, "detected YAS530 MS-3E %s", + yas5xx->version ? "B" : "A"); + strncpy(yas5xx->name, "yas530", sizeof(yas5xx->name)); + break; + case YAS532_DEVICE_ID: + ret = yas532_get_calibration_data(yas5xx); + if (ret) + goto reg_off; + dev_info(dev, "detected YAS532/YAS533 MS-3R/F %s", + yas5xx->version ? "AC" : "AB"); + strncpy(yas5xx->name, "yas532", sizeof(yas5xx->name)); + break; + default: + dev_err(dev, "unhandled device ID %02x\n", yas5xx->devid); + goto reg_off; + } + + yas5xx_dump_calibration(yas5xx); + ret = yas5xx_power_on(yas5xx); + if (ret) + goto reg_off; + ret = yas5xx_meaure_offsets(yas5xx); + if (ret) + goto reg_off; + + indio_dev->info = &yas5xx_info; + indio_dev->available_scan_masks = yas5xx_scan_masks; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->name = yas5xx->name; + indio_dev->channels = yas5xx_channels; + indio_dev->num_channels = ARRAY_SIZE(yas5xx_channels); + + ret = iio_triggered_buffer_setup(indio_dev, NULL, + yas5xx_handle_trigger, + NULL); + if (ret) { + dev_err(dev, "triggered buffer setup failed\n"); + goto reg_off; + } + + ret = iio_device_register(indio_dev); + if (ret) { + dev_err(dev, "device register failed\n"); + goto cleanup_buffer; + } + + /* Take runtime PM online */ + pm_runtime_get_noresume(dev); + pm_runtime_set_active(dev); + pm_runtime_enable(dev); + + pm_runtime_set_autosuspend_delay(dev, YAS5XX_AUTOSUSPEND_DELAY); + pm_runtime_use_autosuspend(dev); + pm_runtime_put(dev); + + return 0; + +cleanup_buffer: + iio_triggered_buffer_cleanup(indio_dev); +reg_off: + regulator_bulk_disable(ARRAY_SIZE(yas5xx->regs), yas5xx->regs); + + return ret; +} + +static int yas5xx_remove(struct i2c_client *i2c) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(i2c); + struct yas5xx *yas5xx = iio_priv(indio_dev); + struct device *dev = &i2c->dev; + + iio_device_unregister(indio_dev); + iio_triggered_buffer_cleanup(indio_dev); + pm_runtime_get_sync(dev); + pm_runtime_put_noidle(dev); + pm_runtime_disable(dev); + if (yas5xx->reset) + gpiod_set_value_cansleep(yas5xx->reset, 1); + regulator_bulk_disable(ARRAY_SIZE(yas5xx->regs), yas5xx->regs); + + return 0; +} + +static int __maybe_unused yas5xx_runtime_suspend(struct device *dev) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct yas5xx *yas5xx = iio_priv(indio_dev); + + if (yas5xx->reset) + gpiod_set_value_cansleep(yas5xx->reset, 1); + regulator_bulk_disable(ARRAY_SIZE(yas5xx->regs), yas5xx->regs); + + return 0; +} + +static int __maybe_unused yas5xx_runtime_resume(struct device *dev) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct yas5xx *yas5xx = iio_priv(indio_dev); + int ret; + + ret = regulator_bulk_enable(ARRAY_SIZE(yas5xx->regs), yas5xx->regs); + if (ret) { + dev_err(dev, "cannot enable regulators\n"); + return ret; + } + + /* + * The YAS530 datasheet says TVSKW is up to 30 ms, after that 1 ms + * for all voltages to settle. The YAS532 is 10ms then 4ms for the + * I2C to come online. Let's keep it safe and put this at 31ms. + */ + usleep_range(31000, 40000); + if (yas5xx->reset) + gpiod_set_value_cansleep(yas5xx->reset, 0); + + ret = yas5xx_power_on(yas5xx); + if (ret) { + dev_err(dev, "cannot power on\n"); + goto out_reset; + } + + return 0; + +out_reset: + if (yas5xx->reset) + gpiod_set_value_cansleep(yas5xx->reset, 1); + regulator_bulk_disable(ARRAY_SIZE(yas5xx->regs), yas5xx->regs); + + return ret; +} + +static const struct dev_pm_ops yas5xx_dev_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, + pm_runtime_force_resume) + SET_RUNTIME_PM_OPS(yas5xx_runtime_suspend, + yas5xx_runtime_resume, NULL) +}; + +static const struct i2c_device_id yas5xx_id[] = { + {"yas530", }, + {"yas532", }, + {"yas533", }, + {} +}; +MODULE_DEVICE_TABLE(i2c, yas5xx_id); + +static const struct of_device_id yas5xx_of_match[] = { + { .compatible = "yamaha,yas530", }, + { .compatible = "yamaha,yas532", }, + { .compatible = "yamaha,yas533", }, + {} +}; +MODULE_DEVICE_TABLE(of, yas5xx_of_match); + +static struct i2c_driver yas5xx_driver = { + .driver = { + .name = "yas5xx", + .of_match_table = yas5xx_of_match, + .pm = &yas5xx_dev_pm_ops, + }, + .probe = yas5xx_probe, + .remove = yas5xx_remove, + .id_table = yas5xx_id, +}; +module_i2c_driver(yas5xx_driver); + +MODULE_DESCRIPTION("Yamaha YAS53x 3-axis magnetometer driver"); +MODULE_AUTHOR("Linus Walleij"); +MODULE_LICENSE("GPL v2");